aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@nbd.name>2018-04-09 09:50:23 +0200
committerFelix Fietkau <nbd@nbd.name>2018-04-27 15:19:19 +0200
commit1de74df8b9bbaafd147a2380fa306140b79b60d9 (patch)
tree2608f98d6239a058cb8401c7ffd7271f93bd7658
parent50b09196282eff24e19541003dfcb248d616006e (diff)
downloadupstream-1de74df8b9bbaafd147a2380fa306140b79b60d9.tar.gz
upstream-1de74df8b9bbaafd147a2380fa306140b79b60d9.tar.bz2
upstream-1de74df8b9bbaafd147a2380fa306140b79b60d9.zip
bcm53xx: drop linux 4.4 and 4.9 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
-rw-r--r--target/linux/bcm53xx/config-4.4339
-rw-r--r--target/linux/bcm53xx/config-4.9339
-rw-r--r--target/linux/bcm53xx/files-4.4/drivers/firmware/broadcom/bcm47xx_sprom.c737
-rw-r--r--target/linux/bcm53xx/patches-4.4/020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch68
-rw-r--r--target/linux/bcm53xx/patches-4.4/021-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch31
-rw-r--r--target/linux/bcm53xx/patches-4.4/022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch254
-rw-r--r--target/linux/bcm53xx/patches-4.4/023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch585
-rw-r--r--target/linux/bcm53xx/patches-4.4/024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch58
-rw-r--r--target/linux/bcm53xx/patches-4.4/030-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch219
-rw-r--r--target/linux/bcm53xx/patches-4.4/031-ARM-dts-enable-clock-support-for-BCM5301X.patch174
-rw-r--r--target/linux/bcm53xx/patches-4.4/032-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch56
-rw-r--r--target/linux/bcm53xx/patches-4.4/033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch141
-rw-r--r--target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch117
-rw-r--r--target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch95
-rw-r--r--target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch58
-rw-r--r--target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch75
-rw-r--r--target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch63
-rw-r--r--target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch38
-rw-r--r--target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch60
-rw-r--r--target/linux/bcm53xx/patches-4.4/039-ARM-dts-BCM5301x-Add-RNG-Device-Tree-node.patch27
-rw-r--r--target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch139
-rw-r--r--target/linux/bcm53xx/patches-4.4/041-0001-ARM-BCM5301X-Specify-NAND-chip-select-and-ECC-in-sep.patch65
-rw-r--r--target/linux/bcm53xx/patches-4.4/041-0002-ARM-BCM5301X-Fix-NAND-ECC-parameters-for-D-Link-DIR-.patch49
-rw-r--r--target/linux/bcm53xx/patches-4.4/042-ARM-BCM5301X-Specify-PHY-of-USB-2.0-in-DT.patch46
-rw-r--r--target/linux/bcm53xx/patches-4.4/043-0001-ARM-BCM53573-Initial-support-for-Broadcom-BCM53573-S.patch61
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch136
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch264
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch92
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch51
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch93
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch159
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch38
-rw-r--r--target/linux/bcm53xx/patches-4.4/044-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch146
-rw-r--r--target/linux/bcm53xx/patches-4.4/045-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch75
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch269
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch43
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch68
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch31
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch236
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch56
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch126
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch89
-rw-r--r--target/linux/bcm53xx/patches-4.4/046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch136
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch72
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch73
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch54
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch129
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch36
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch265
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch66
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch50
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch651
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch40
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch130
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch27
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch161
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch33
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.4/047-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch74
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch139
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch135
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch58
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch30
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch96
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch96
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch120
-rw-r--r--target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch83
-rw-r--r--target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch252
-rw-r--r--target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch27
-rw-r--r--target/linux/bcm53xx/patches-4.4/071-0001-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch361
-rw-r--r--target/linux/bcm53xx/patches-4.4/071-0002-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch177
-rw-r--r--target/linux/bcm53xx/patches-4.4/080-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch75
-rw-r--r--target/linux/bcm53xx/patches-4.4/081-0001-USB-bcma-make-helper-creating-platform-dev-more-gene.patch77
-rw-r--r--target/linux/bcm53xx/patches-4.4/081-0002-USB-bcma-separate-code-initializing-USB-2.0-core.patch116
-rw-r--r--target/linux/bcm53xx/patches-4.4/081-0003-USB-bcma-use-simpler-devm-helper-for-getting-vcc-GPI.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.4/082-0001-USB-bcma-initialize-Northstar-USB-3.0-controller.patch67
-rw-r--r--target/linux/bcm53xx/patches-4.4/082-0002-USB-bcma-support-old-USB-2.0-controller-on-Northstar.patch163
-rw-r--r--target/linux/bcm53xx/patches-4.4/082-0003-USB-bcma-drop-Northstar-PHY-2.0-initialization-code.patch136
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0001-spi-bcm-qspi-Add-Broadcom-MSPI-driver.patch832
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0002-spi-brcmstb-qspi-Broadcom-settop-platform-driver.patch84
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0003-spi-bcm-qspi-Add-BSPI-spi-nor-flash-controller-drive.patch780
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0004-spi-bcm-qspi-don-t-include-linux-mtd-cfi.h.patch27
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0005-spi-bcm-qspi-fix-suspend-resume-ifdef.patch63
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0006-spi-bcm-qspi-Fix-return-value-check-in-bcm_qspi_prob.patch29
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0007-spi-bcm-qspi-Fix-error-return-code-in-bcm_qspi_probe.patch32
-rw-r--r--target/linux/bcm53xx/patches-4.4/083-0008-spi-iproc-qspi-Add-Broadcom-iProc-SoCs-support.patch452
-rw-r--r--target/linux/bcm53xx/patches-4.4/084-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch52
-rw-r--r--target/linux/bcm53xx/patches-4.4/084-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch50
-rw-r--r--target/linux/bcm53xx/patches-4.4/084-0003-spi-bcm53xx-simplify-reading-SPI-data.patch107
-rw-r--r--target/linux/bcm53xx/patches-4.4/085-PCI-iproc-Hide-CONFIG_PCIE_IPROC.patch42
-rw-r--r--target/linux/bcm53xx/patches-4.4/086-PCI-iproc-Do-not-use-0x-in-front-of-pap.patch27
-rw-r--r--target/linux/bcm53xx/patches-4.4/087-0001-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch30
-rw-r--r--target/linux/bcm53xx/patches-4.4/087-0002-PCI-iproc-Add-PAXC-interface-support.patch429
-rw-r--r--target/linux/bcm53xx/patches-4.4/087-0003-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch68
-rw-r--r--target/linux/bcm53xx/patches-4.4/087-0004-PCI-iproc-Add-iProc-PCIe-MSI-support.patch891
-rw-r--r--target/linux/bcm53xx/patches-4.4/088-PCI-iproc-Allow-multiple-devices-except-on-PAXC.patch83
-rw-r--r--target/linux/bcm53xx/patches-4.4/089-clk-bcm-Add-driver-for-BCM53573-ILP-clock.patch224
-rw-r--r--target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch11
-rw-r--r--target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch45
-rw-r--r--target/linux/bcm53xx/patches-4.4/140-mtd-brcmnand-set-initial-ECC-params-based-on-info-fr.patch53
-rw-r--r--target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch137
-rw-r--r--target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch101
-rw-r--r--target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch64
-rw-r--r--target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch20
-rw-r--r--target/linux/bcm53xx/patches-4.4/400-mtd-brcmnand-stop-special-treating-ECC-strength-1-as.patch26
-rw-r--r--target/linux/bcm53xx/patches-4.4/405-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch52
-rw-r--r--target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch56
-rw-r--r--target/linux/bcm53xx/patches-4.4/905-BCM53573-minor-hacks.patch88
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch136
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch264
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch92
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch51
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch93
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch159
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch38
-rw-r--r--target/linux/bcm53xx/patches-4.9/030-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch146
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch269
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch43
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch68
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch31
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch236
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch56
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch126
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch89
-rw-r--r--target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch136
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch72
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch73
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch54
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch69
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch129
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch36
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch265
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch66
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch50
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch651
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch40
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch130
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch27
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch161
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch33
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.9/033-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch74
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch139
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch135
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch58
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch30
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch96
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch96
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch120
-rw-r--r--target/linux/bcm53xx/patches-4.9/035-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch83
-rw-r--r--target/linux/bcm53xx/patches-4.9/070-0001-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch177
-rw-r--r--target/linux/bcm53xx/patches-4.9/080-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch52
-rw-r--r--target/linux/bcm53xx/patches-4.9/080-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch50
-rw-r--r--target/linux/bcm53xx/patches-4.9/080-0003-spi-bcm53xx-simplify-reading-SPI-data.patch107
-rw-r--r--target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch95
-rw-r--r--target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch137
-rw-r--r--target/linux/bcm53xx/patches-4.9/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch101
-rw-r--r--target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch64
-rw-r--r--target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch20
-rw-r--r--target/linux/bcm53xx/patches-4.9/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch70
-rw-r--r--target/linux/bcm53xx/patches-4.9/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch34
-rw-r--r--target/linux/bcm53xx/patches-4.9/410-Use-brcm-bcm947xx-cfe-partitions-binding-for-Broadco.patch53
-rw-r--r--target/linux/bcm53xx/patches-4.9/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch59
-rw-r--r--target/linux/bcm53xx/patches-4.9/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch52
-rw-r--r--target/linux/bcm53xx/patches-4.9/900-mtd-bcm47xxpart-add-device-specific-workarounds.patch56
-rw-r--r--target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch88
179 files changed, 0 insertions, 21831 deletions
diff --git a/target/linux/bcm53xx/config-4.4 b/target/linux/bcm53xx/config-4.4
deleted file mode 100644
index 19166b94f8..0000000000
--- a/target/linux/bcm53xx/config-4.4
+++ /dev/null
@@ -1,339 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BCM=y
-# CONFIG_ARCH_BCM_21664 is not set
-# CONFIG_ARCH_BCM_281XX is not set
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-# CONFIG_ARCH_BCM_63XX is not set
-# CONFIG_ARCH_BCM_CYGNUS is not set
-CONFIG_ARCH_BCM_IPROC=y
-# CONFIG_ARCH_BCM_NSP is not set
-# CONFIG_ARCH_BRCMSTB is not set
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MDIO_BCM_IPROC is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_ECC=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=2
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-CONFIG_PINCTRL=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM53XX=y
-# CONFIG_SPI_BCM_QSPI is not set
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/bcm53xx/config-4.9 b/target/linux/bcm53xx/config-4.9
deleted file mode 100644
index 84016b6cd5..0000000000
--- a/target/linux/bcm53xx/config-4.9
+++ /dev/null
@@ -1,339 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_5301X=y
-CONFIG_ARCH_BCM_53573=y
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BCM47XX_NVRAM=y
-CONFIG_BCM47XX_SPROM=y
-CONFIG_BCM47XX_WDT=y
-CONFIG_BCMA=y
-CONFIG_BCMA_BLOCKIO=y
-CONFIG_BCMA_DEBUG=y
-CONFIG_BCMA_DRIVER_GMAC_CMN=y
-CONFIG_BCMA_DRIVER_GPIO=y
-CONFIG_BCMA_DRIVER_PCI=y
-CONFIG_BCMA_HOST_PCI=y
-CONFIG_BCMA_HOST_PCI_POSSIBLE=y
-CONFIG_BCMA_HOST_SOC=y
-CONFIG_BCMA_SFLASH=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_NS_THERMAL=y
-CONFIG_BGMAC=y
-CONFIG_BGMAC_BCMA=y
-# CONFIG_BGMAC_PLATFORM is not set
-# CONFIG_BINFMT_FLAT is not set
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-# CONFIG_CLK_BCM_NS2 is not set
-CONFIG_CLK_BCM_NSP=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_IPROC=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BCM_5301X=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_DEBUG_UART_PHYS=0x18000300
-CONFIG_DEBUG_UART_VIRT=0xf1000300
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MDIO_BCM_IPROC is not set
-CONFIG_MDIO_BOARDINFO=y
-# CONFIG_MDIO_BUS_MUX_BCM_IPROC is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_BCM47XXSFLASH=y
-CONFIG_MTD_BCM47XX_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_PARSER_TRX=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_SEAMA_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=2
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIE_IPROC=y
-CONFIG_PCIE_IPROC_BCMA=y
-# CONFIG_PCIE_IPROC_PLATFORM is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_BCM_NS_USB2 is not set
-# CONFIG_PHY_BCM_NS_USB3 is not set
-# CONFIG_PHY_BRCM_SATA is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_IPROC_GPIO is not set
-# CONFIG_PINCTRL_NS2_MUX is not set
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_RATIONAL=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-# CONFIG_SERIAL_AMBA_PL010 is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM53XX=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_B53=y
-# CONFIG_SWCONFIG_B53_MMAP_DRIVER is not set
-CONFIG_SWCONFIG_B53_PHY_DRIVER=y
-CONFIG_SWCONFIG_B53_PHY_FIXUP=y
-CONFIG_SWCONFIG_B53_SRAB_DRIVER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/bcm53xx/files-4.4/drivers/firmware/broadcom/bcm47xx_sprom.c b/target/linux/bcm53xx/files-4.4/drivers/firmware/broadcom/bcm47xx_sprom.c
deleted file mode 100644
index dfcccb0499..0000000000
--- a/target/linux/bcm53xx/files-4.4/drivers/firmware/broadcom/bcm47xx_sprom.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * Copyright (C) 2004 Florian Schirmer <jolt@tuxbox.org>
- * Copyright (C) 2006 Felix Fietkau <nbd@nbd.name>
- * Copyright (C) 2006 Michael Buesch <m@bues.ch>
- * Copyright (C) 2010 Waldemar Brodkorb <wbx@openadk.org>
- * Copyright (C) 2010-2012 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/bcm47xx_nvram.h>
-#include <linux/bcma/bcma.h>
-#include <linux/etherdevice.h>
-#include <linux/if_ether.h>
-#include <linux/ssb/ssb.h>
-
-static void create_key(const char *prefix, const char *postfix,
- const char *name, char *buf, int len)
-{
- if (prefix && postfix)
- snprintf(buf, len, "%s%s%s", prefix, name, postfix);
- else if (prefix)
- snprintf(buf, len, "%s%s", prefix, name);
- else if (postfix)
- snprintf(buf, len, "%s%s", name, postfix);
- else
- snprintf(buf, len, "%s", name);
-}
-
-static int get_nvram_var(const char *prefix, const char *postfix,
- const char *name, char *buf, int len, bool fallback)
-{
- char key[40];
- int err;
-
- create_key(prefix, postfix, name, key, sizeof(key));
-
- err = bcm47xx_nvram_getenv(key, buf, len);
- if (fallback && err == -ENOENT && prefix) {
- create_key(NULL, postfix, name, key, sizeof(key));
- err = bcm47xx_nvram_getenv(key, buf, len);
- }
- return err;
-}
-
-#define NVRAM_READ_VAL(type) \
-static void nvram_read_ ## type(const char *prefix, \
- const char *postfix, const char *name, \
- type *val, type allset, bool fallback) \
-{ \
- char buf[100]; \
- int err; \
- type var; \
- \
- err = get_nvram_var(prefix, postfix, name, buf, sizeof(buf), \
- fallback); \
- if (err < 0) \
- return; \
- err = kstrto ## type(strim(buf), 0, &var); \
- if (err) { \
- pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \
- prefix, name, postfix, buf, err); \
- return; \
- } \
- if (allset && var == allset) \
- return; \
- *val = var; \
-}
-
-NVRAM_READ_VAL(u8)
-NVRAM_READ_VAL(s8)
-NVRAM_READ_VAL(u16)
-NVRAM_READ_VAL(u32)
-
-#undef NVRAM_READ_VAL
-
-static void nvram_read_u32_2(const char *prefix, const char *name,
- u16 *val_lo, u16 *val_hi, bool fallback)
-{
- char buf[100];
- int err;
- u32 val;
-
- err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
- if (err < 0)
- return;
- err = kstrtou32(strim(buf), 0, &val);
- if (err) {
- pr_warn("can not parse nvram name %s%s with value %s got %i\n",
- prefix, name, buf, err);
- return;
- }
- *val_lo = (val & 0x0000FFFFU);
- *val_hi = (val & 0xFFFF0000U) >> 16;
-}
-
-static void nvram_read_leddc(const char *prefix, const char *name,
- u8 *leddc_on_time, u8 *leddc_off_time,
- bool fallback)
-{
- char buf[100];
- int err;
- u32 val;
-
- err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
- if (err < 0)
- return;
- err = kstrtou32(strim(buf), 0, &val);
- if (err) {
- pr_warn("can not parse nvram name %s%s with value %s got %i\n",
- prefix, name, buf, err);
- return;
- }
-
- if (val == 0xffff || val == 0xffffffff)
- return;
-
- *leddc_on_time = val & 0xff;
- *leddc_off_time = (val >> 16) & 0xff;
-}
-
-static void bcm47xx_nvram_parse_macaddr(char *buf, u8 macaddr[6])
-{
- if (strchr(buf, ':'))
- sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0],
- &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
- &macaddr[5]);
- else if (strchr(buf, '-'))
- sscanf(buf, "%hhx-%hhx-%hhx-%hhx-%hhx-%hhx", &macaddr[0],
- &macaddr[1], &macaddr[2], &macaddr[3], &macaddr[4],
- &macaddr[5]);
- else
- pr_warn("Can not parse mac address: %s\n", buf);
-}
-
-static void nvram_read_macaddr(const char *prefix, const char *name,
- u8 val[6], bool fallback)
-{
- char buf[100];
- int err;
-
- err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
- if (err < 0)
- return;
-
- bcm47xx_nvram_parse_macaddr(buf, val);
-}
-
-static void nvram_read_alpha2(const char *prefix, const char *name,
- char val[2], bool fallback)
-{
- char buf[10];
- int err;
-
- err = get_nvram_var(prefix, NULL, name, buf, sizeof(buf), fallback);
- if (err < 0)
- return;
- if (buf[0] == '0')
- return;
- if (strlen(buf) > 2) {
- pr_warn("alpha2 is too long %s\n", buf);
- return;
- }
- memcpy(val, buf, 2);
-}
-
-/* This is one-function-only macro, it uses local "sprom" variable! */
-#define ENTRY(_revmask, _type, _prefix, _name, _val, _allset, _fallback) \
- if (_revmask & BIT(sprom->revision)) \
- nvram_read_ ## _type(_prefix, NULL, _name, &sprom->_val, \
- _allset, _fallback)
-/*
- * Special version of filling function that can be safely called for any SPROM
- * revision. For every NVRAM to SPROM mapping it contains bitmask of revisions
- * for which the mapping is valid.
- * It obviously requires some hexadecimal/bitmasks knowledge, but allows
- * writing cleaner code (easy revisions handling).
- * Note that while SPROM revision 0 was never used, we still keep BIT(0)
- * reserved for it, just to keep numbering sane.
- */
-static void bcm47xx_sprom_fill_auto(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
-{
- const char *pre = prefix;
- bool fb = fallback;
-
- /* Broadcom extracts it for rev 8+ but it was found on 2 and 4 too */
- ENTRY(0xfffffffe, u16, pre, "devid", dev_id, 0, fallback);
-
- ENTRY(0xfffffffe, u16, pre, "boardrev", board_rev, 0, true);
- ENTRY(0xfffffffe, u32, pre, "boardflags", boardflags, 0, fb);
- ENTRY(0xfffffff0, u32, pre, "boardflags2", boardflags2, 0, fb);
- ENTRY(0xfffff800, u32, pre, "boardflags3", boardflags3, 0, fb);
- ENTRY(0x00000002, u16, pre, "boardflags", boardflags_lo, 0, fb);
- ENTRY(0xfffffffc, u16, pre, "boardtype", board_type, 0, true);
- ENTRY(0xfffffffe, u16, pre, "boardnum", board_num, 0, fb);
- ENTRY(0x00000002, u8, pre, "cc", country_code, 0, fb);
- ENTRY(0xfffffff8, u8, pre, "regrev", regrev, 0, fb);
-
- ENTRY(0xfffffffe, u8, pre, "ledbh0", gpio0, 0xff, fb);
- ENTRY(0xfffffffe, u8, pre, "ledbh1", gpio1, 0xff, fb);
- ENTRY(0xfffffffe, u8, pre, "ledbh2", gpio2, 0xff, fb);
- ENTRY(0xfffffffe, u8, pre, "ledbh3", gpio3, 0xff, fb);
-
- ENTRY(0x0000070e, u16, pre, "pa0b0", pa0b0, 0, fb);
- ENTRY(0x0000070e, u16, pre, "pa0b1", pa0b1, 0, fb);
- ENTRY(0x0000070e, u16, pre, "pa0b2", pa0b2, 0, fb);
- ENTRY(0x0000070e, u8, pre, "pa0itssit", itssi_bg, 0, fb);
- ENTRY(0x0000070e, u8, pre, "pa0maxpwr", maxpwr_bg, 0, fb);
-
- ENTRY(0x0000070c, u8, pre, "opo", opo, 0, fb);
- ENTRY(0xfffffffe, u8, pre, "aa2g", ant_available_bg, 0, fb);
- ENTRY(0xfffffffe, u8, pre, "aa5g", ant_available_a, 0, fb);
- ENTRY(0x000007fe, s8, pre, "ag0", antenna_gain.a0, 0, fb);
- ENTRY(0x000007fe, s8, pre, "ag1", antenna_gain.a1, 0, fb);
- ENTRY(0x000007f0, s8, pre, "ag2", antenna_gain.a2, 0, fb);
- ENTRY(0x000007f0, s8, pre, "ag3", antenna_gain.a3, 0, fb);
-
- ENTRY(0x0000070e, u16, pre, "pa1b0", pa1b0, 0, fb);
- ENTRY(0x0000070e, u16, pre, "pa1b1", pa1b1, 0, fb);
- ENTRY(0x0000070e, u16, pre, "pa1b2", pa1b2, 0, fb);
- ENTRY(0x0000070c, u16, pre, "pa1lob0", pa1lob0, 0, fb);
- ENTRY(0x0000070c, u16, pre, "pa1lob1", pa1lob1, 0, fb);
- ENTRY(0x0000070c, u16, pre, "pa1lob2", pa1lob2, 0, fb);
- ENTRY(0x0000070c, u16, pre, "pa1hib0", pa1hib0, 0, fb);
- ENTRY(0x0000070c, u16, pre, "pa1hib1", pa1hib1, 0, fb);
- ENTRY(0x0000070c, u16, pre, "pa1hib2", pa1hib2, 0, fb);
- ENTRY(0x0000070e, u8, pre, "pa1itssit", itssi_a, 0, fb);
- ENTRY(0x0000070e, u8, pre, "pa1maxpwr", maxpwr_a, 0, fb);
- ENTRY(0x0000070c, u8, pre, "pa1lomaxpwr", maxpwr_al, 0, fb);
- ENTRY(0x0000070c, u8, pre, "pa1himaxpwr", maxpwr_ah, 0, fb);
-
- ENTRY(0x00000708, u8, pre, "bxa2g", bxa2g, 0, fb);
- ENTRY(0x00000708, u8, pre, "rssisav2g", rssisav2g, 0, fb);
- ENTRY(0x00000708, u8, pre, "rssismc2g", rssismc2g, 0, fb);
- ENTRY(0x00000708, u8, pre, "rssismf2g", rssismf2g, 0, fb);
- ENTRY(0x00000708, u8, pre, "bxa5g", bxa5g, 0, fb);
- ENTRY(0x00000708, u8, pre, "rssisav5g", rssisav5g, 0, fb);
- ENTRY(0x00000708, u8, pre, "rssismc5g", rssismc5g, 0, fb);
- ENTRY(0x00000708, u8, pre, "rssismf5g", rssismf5g, 0, fb);
- ENTRY(0x00000708, u8, pre, "tri2g", tri2g, 0, fb);
- ENTRY(0x00000708, u8, pre, "tri5g", tri5g, 0, fb);
- ENTRY(0x00000708, u8, pre, "tri5gl", tri5gl, 0, fb);
- ENTRY(0x00000708, u8, pre, "tri5gh", tri5gh, 0, fb);
- ENTRY(0x00000708, s8, pre, "rxpo2g", rxpo2g, 0, fb);
- ENTRY(0x00000708, s8, pre, "rxpo5g", rxpo5g, 0, fb);
- ENTRY(0xfffffff0, u8, pre, "txchain", txchain, 0xf, fb);
- ENTRY(0xfffffff0, u8, pre, "rxchain", rxchain, 0xf, fb);
- ENTRY(0xfffffff0, u8, pre, "antswitch", antswitch, 0xff, fb);
- ENTRY(0x00000700, u8, pre, "tssipos2g", fem.ghz2.tssipos, 0, fb);
- ENTRY(0x00000700, u8, pre, "extpagain2g", fem.ghz2.extpa_gain, 0, fb);
- ENTRY(0x00000700, u8, pre, "pdetrange2g", fem.ghz2.pdet_range, 0, fb);
- ENTRY(0x00000700, u8, pre, "triso2g", fem.ghz2.tr_iso, 0, fb);
- ENTRY(0x00000700, u8, pre, "antswctl2g", fem.ghz2.antswlut, 0, fb);
- ENTRY(0x00000700, u8, pre, "tssipos5g", fem.ghz5.tssipos, 0, fb);
- ENTRY(0x00000700, u8, pre, "extpagain5g", fem.ghz5.extpa_gain, 0, fb);
- ENTRY(0x00000700, u8, pre, "pdetrange5g", fem.ghz5.pdet_range, 0, fb);
- ENTRY(0x00000700, u8, pre, "triso5g", fem.ghz5.tr_iso, 0, fb);
- ENTRY(0x00000700, u8, pre, "antswctl5g", fem.ghz5.antswlut, 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid2ga0", txpid2g[0], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid2ga1", txpid2g[1], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid2ga2", txpid2g[2], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid2ga3", txpid2g[3], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5ga0", txpid5g[0], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5ga1", txpid5g[1], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5ga2", txpid5g[2], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5ga3", txpid5g[3], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gla0", txpid5gl[0], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gla1", txpid5gl[1], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gla2", txpid5gl[2], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gla3", txpid5gl[3], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gha0", txpid5gh[0], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gha1", txpid5gh[1], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gha2", txpid5gh[2], 0, fb);
- ENTRY(0x000000f0, u8, pre, "txpid5gha3", txpid5gh[3], 0, fb);
-
- ENTRY(0xffffff00, u8, pre, "tempthresh", tempthresh, 0, fb);
- ENTRY(0xffffff00, u8, pre, "tempoffset", tempoffset, 0, fb);
- ENTRY(0xffffff00, u16, pre, "rawtempsense", rawtempsense, 0, fb);
- ENTRY(0xffffff00, u8, pre, "measpower", measpower, 0, fb);
- ENTRY(0xffffff00, u8, pre, "tempsense_slope", tempsense_slope, 0, fb);
- ENTRY(0xffffff00, u8, pre, "tempcorrx", tempcorrx, 0, fb);
- ENTRY(0xffffff00, u8, pre, "tempsense_option", tempsense_option, 0, fb);
- ENTRY(0x00000700, u8, pre, "freqoffset_corr", freqoffset_corr, 0, fb);
- ENTRY(0x00000700, u8, pre, "iqcal_swp_dis", iqcal_swp_dis, 0, fb);
- ENTRY(0x00000700, u8, pre, "hw_iqcal_en", hw_iqcal_en, 0, fb);
- ENTRY(0x00000700, u8, pre, "elna2g", elna2g, 0, fb);
- ENTRY(0x00000700, u8, pre, "elna5g", elna5g, 0, fb);
- ENTRY(0xffffff00, u8, pre, "phycal_tempdelta", phycal_tempdelta, 0, fb);
- ENTRY(0xffffff00, u8, pre, "temps_period", temps_period, 0, fb);
- ENTRY(0xffffff00, u8, pre, "temps_hysteresis", temps_hysteresis, 0, fb);
- ENTRY(0xffffff00, u8, pre, "measpower1", measpower1, 0, fb);
- ENTRY(0xffffff00, u8, pre, "measpower2", measpower2, 0, fb);
-
- ENTRY(0x000001f0, u16, pre, "cck2gpo", cck2gpo, 0, fb);
- ENTRY(0x000001f0, u32, pre, "ofdm2gpo", ofdm2gpo, 0, fb);
- ENTRY(0x000001f0, u32, pre, "ofdm5gpo", ofdm5gpo, 0, fb);
- ENTRY(0x000001f0, u32, pre, "ofdm5glpo", ofdm5glpo, 0, fb);
- ENTRY(0x000001f0, u32, pre, "ofdm5ghpo", ofdm5ghpo, 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo0", mcs2gpo[0], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo1", mcs2gpo[1], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo2", mcs2gpo[2], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo3", mcs2gpo[3], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo4", mcs2gpo[4], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo5", mcs2gpo[5], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo6", mcs2gpo[6], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs2gpo7", mcs2gpo[7], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo0", mcs5gpo[0], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo1", mcs5gpo[1], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo2", mcs5gpo[2], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo3", mcs5gpo[3], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo4", mcs5gpo[4], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo5", mcs5gpo[5], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo6", mcs5gpo[6], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5gpo7", mcs5gpo[7], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo0", mcs5glpo[0], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo1", mcs5glpo[1], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo2", mcs5glpo[2], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo3", mcs5glpo[3], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo4", mcs5glpo[4], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo5", mcs5glpo[5], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo6", mcs5glpo[6], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5glpo7", mcs5glpo[7], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo0", mcs5ghpo[0], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo1", mcs5ghpo[1], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo2", mcs5ghpo[2], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo3", mcs5ghpo[3], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo4", mcs5ghpo[4], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo5", mcs5ghpo[5], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo6", mcs5ghpo[6], 0, fb);
- ENTRY(0x000001f0, u16, pre, "mcs5ghpo7", mcs5ghpo[7], 0, fb);
- ENTRY(0x000001f0, u16, pre, "cddpo", cddpo, 0, fb);
- ENTRY(0x000001f0, u16, pre, "stbcpo", stbcpo, 0, fb);
- ENTRY(0x000001f0, u16, pre, "bw40po", bw40po, 0, fb);
- ENTRY(0x000001f0, u16, pre, "bwduppo", bwduppo, 0, fb);
-
- ENTRY(0xfffffe00, u16, pre, "cckbw202gpo", cckbw202gpo, 0, fb);
- ENTRY(0xfffffe00, u16, pre, "cckbw20ul2gpo", cckbw20ul2gpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw202gpo", legofdmbw202gpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw20ul2gpo", legofdmbw20ul2gpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw205glpo", legofdmbw205glpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw20ul5glpo", legofdmbw20ul5glpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw205gmpo", legofdmbw205gmpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw20ul5gmpo", legofdmbw20ul5gmpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw205ghpo", legofdmbw205ghpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "legofdmbw20ul5ghpo", legofdmbw20ul5ghpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw202gpo", mcsbw202gpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "mcsbw20ul2gpo", mcsbw20ul2gpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw402gpo", mcsbw402gpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw205glpo", mcsbw205glpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "mcsbw20ul5glpo", mcsbw20ul5glpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw405glpo", mcsbw405glpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw205gmpo", mcsbw205gmpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "mcsbw20ul5gmpo", mcsbw20ul5gmpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw405gmpo", mcsbw405gmpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw205ghpo", mcsbw205ghpo, 0, fb);
- ENTRY(0x00000600, u32, pre, "mcsbw20ul5ghpo", mcsbw20ul5ghpo, 0, fb);
- ENTRY(0xfffffe00, u32, pre, "mcsbw405ghpo", mcsbw405ghpo, 0, fb);
- ENTRY(0x00000600, u16, pre, "mcs32po", mcs32po, 0, fb);
- ENTRY(0x00000600, u16, pre, "legofdm40duppo", legofdm40duppo, 0, fb);
- ENTRY(0x00000700, u8, pre, "pcieingress_war", pcieingress_war, 0, fb);
-
- /* TODO: rev 11 support */
- ENTRY(0x00000700, u8, pre, "rxgainerr2ga0", rxgainerr2ga[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr2ga1", rxgainerr2ga[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr2ga2", rxgainerr2ga[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gla0", rxgainerr5gla[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gla1", rxgainerr5gla[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gla2", rxgainerr5gla[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gma0", rxgainerr5gma[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gma1", rxgainerr5gma[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gma2", rxgainerr5gma[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gha0", rxgainerr5gha[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gha1", rxgainerr5gha[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gha2", rxgainerr5gha[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gua0", rxgainerr5gua[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gua1", rxgainerr5gua[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "rxgainerr5gua2", rxgainerr5gua[2], 0, fb);
-
- ENTRY(0xfffffe00, u8, pre, "sar2g", sar2g, 0, fb);
- ENTRY(0xfffffe00, u8, pre, "sar5g", sar5g, 0, fb);
-
- /* TODO: rev 11 support */
- ENTRY(0x00000700, u8, pre, "noiselvl2ga0", noiselvl2ga[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl2ga1", noiselvl2ga[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl2ga2", noiselvl2ga[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gla0", noiselvl5gla[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gla1", noiselvl5gla[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gla2", noiselvl5gla[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gma0", noiselvl5gma[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gma1", noiselvl5gma[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gma2", noiselvl5gma[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gha0", noiselvl5gha[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gha1", noiselvl5gha[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gha2", noiselvl5gha[2], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gua0", noiselvl5gua[0], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gua1", noiselvl5gua[1], 0, fb);
- ENTRY(0x00000700, u8, pre, "noiselvl5gua2", noiselvl5gua[2], 0, fb);
-}
-#undef ENTRY /* It's specififc, uses local variable, don't use it (again). */
-
-static void bcm47xx_fill_sprom_path_r4589(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
-{
- char postfix[2];
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
- struct ssb_sprom_core_pwr_info *pwr_info;
-
- pwr_info = &sprom->core_pwr_info[i];
-
- snprintf(postfix, sizeof(postfix), "%i", i);
- nvram_read_u8(prefix, postfix, "maxp2ga",
- &pwr_info->maxpwr_2g, 0, fallback);
- nvram_read_u8(prefix, postfix, "itt2ga",
- &pwr_info->itssi_2g, 0, fallback);
- nvram_read_u8(prefix, postfix, "itt5ga",
- &pwr_info->itssi_5g, 0, fallback);
- nvram_read_u16(prefix, postfix, "pa2gw0a",
- &pwr_info->pa_2g[0], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa2gw1a",
- &pwr_info->pa_2g[1], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa2gw2a",
- &pwr_info->pa_2g[2], 0, fallback);
- nvram_read_u8(prefix, postfix, "maxp5ga",
- &pwr_info->maxpwr_5g, 0, fallback);
- nvram_read_u8(prefix, postfix, "maxp5gha",
- &pwr_info->maxpwr_5gh, 0, fallback);
- nvram_read_u8(prefix, postfix, "maxp5gla",
- &pwr_info->maxpwr_5gl, 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5gw0a",
- &pwr_info->pa_5g[0], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5gw1a",
- &pwr_info->pa_5g[1], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5gw2a",
- &pwr_info->pa_5g[2], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5glw0a",
- &pwr_info->pa_5gl[0], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5glw1a",
- &pwr_info->pa_5gl[1], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5glw2a",
- &pwr_info->pa_5gl[2], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5ghw0a",
- &pwr_info->pa_5gh[0], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5ghw1a",
- &pwr_info->pa_5gh[1], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5ghw2a",
- &pwr_info->pa_5gh[2], 0, fallback);
- }
-}
-
-static void bcm47xx_fill_sprom_path_r45(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
-{
- char postfix[2];
- int i;
-
- for (i = 0; i < ARRAY_SIZE(sprom->core_pwr_info); i++) {
- struct ssb_sprom_core_pwr_info *pwr_info;
-
- pwr_info = &sprom->core_pwr_info[i];
-
- snprintf(postfix, sizeof(postfix), "%i", i);
- nvram_read_u16(prefix, postfix, "pa2gw3a",
- &pwr_info->pa_2g[3], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5gw3a",
- &pwr_info->pa_5g[3], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5glw3a",
- &pwr_info->pa_5gl[3], 0, fallback);
- nvram_read_u16(prefix, postfix, "pa5ghw3a",
- &pwr_info->pa_5gh[3], 0, fallback);
- }
-}
-
-static bool bcm47xx_is_valid_mac(u8 *mac)
-{
- return mac && !(mac[0] == 0x00 && mac[1] == 0x90 && mac[2] == 0x4c);
-}
-
-static int bcm47xx_increase_mac_addr(u8 *mac, u8 num)
-{
- u8 *oui = mac + ETH_ALEN/2 - 1;
- u8 *p = mac + ETH_ALEN - 1;
-
- do {
- (*p) += num;
- if (*p > num)
- break;
- p--;
- num = 1;
- } while (p != oui);
-
- if (p == oui) {
- pr_err("unable to fetch mac address\n");
- return -ENOENT;
- }
- return 0;
-}
-
-static int mac_addr_used = 2;
-
-static void bcm47xx_fill_sprom_ethernet(struct ssb_sprom *sprom,
- const char *prefix, bool fallback)
-{
- bool fb = fallback;
-
- nvram_read_macaddr(prefix, "et0macaddr", sprom->et0mac, fallback);
- nvram_read_u8(prefix, NULL, "et0mdcport", &sprom->et0mdcport, 0,
- fallback);
- nvram_read_u8(prefix, NULL, "et0phyaddr", &sprom->et0phyaddr, 0,
- fallback);
-
- nvram_read_macaddr(prefix, "et1macaddr", sprom->et1mac, fallback);
- nvram_read_u8(prefix, NULL, "et1mdcport", &sprom->et1mdcport, 0,
- fallback);
- nvram_read_u8(prefix, NULL, "et1phyaddr", &sprom->et1phyaddr, 0,
- fallback);
-
- nvram_read_macaddr(prefix, "et2macaddr", sprom->et2mac, fb);
- nvram_read_u8(prefix, NULL, "et2mdcport", &sprom->et2mdcport, 0, fb);
- nvram_read_u8(prefix, NULL, "et2phyaddr", &sprom->et2phyaddr, 0, fb);
-
- nvram_read_macaddr(prefix, "macaddr", sprom->il0mac, fallback);
- nvram_read_macaddr(prefix, "il0macaddr", sprom->il0mac, fallback);
-
- /* The address prefix 00:90:4C is used by Broadcom in their initial
- * configuration. When a mac address with the prefix 00:90:4C is used
- * all devices from the same series are sharing the same mac address.
- * To prevent mac address collisions we replace them with a mac address
- * based on the base address.
- */
- if (!bcm47xx_is_valid_mac(sprom->il0mac)) {
- u8 mac[6];
-
- nvram_read_macaddr(NULL, "et0macaddr", mac, false);
- if (bcm47xx_is_valid_mac(mac)) {
- int err = bcm47xx_increase_mac_addr(mac, mac_addr_used);
-
- if (!err) {
- ether_addr_copy(sprom->il0mac, mac);
- mac_addr_used++;
- }
- }
- }
-}
-
-static void bcm47xx_fill_board_data(struct ssb_sprom *sprom, const char *prefix,
- bool fallback)
-{
- nvram_read_u32_2(prefix, "boardflags", &sprom->boardflags_lo,
- &sprom->boardflags_hi, fallback);
- nvram_read_u32_2(prefix, "boardflags2", &sprom->boardflags2_lo,
- &sprom->boardflags2_hi, fallback);
-}
-
-void bcm47xx_fill_sprom(struct ssb_sprom *sprom, const char *prefix,
- bool fallback)
-{
- bcm47xx_fill_sprom_ethernet(sprom, prefix, fallback);
- bcm47xx_fill_board_data(sprom, prefix, fallback);
-
- nvram_read_u8(prefix, NULL, "sromrev", &sprom->revision, 0, fallback);
-
- /* Entries requiring custom functions */
- nvram_read_alpha2(prefix, "ccode", sprom->alpha2, fallback);
- if (sprom->revision >= 3)
- nvram_read_leddc(prefix, "leddc", &sprom->leddc_on_time,
- &sprom->leddc_off_time, fallback);
-
- switch (sprom->revision) {
- case 4:
- case 5:
- bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
- bcm47xx_fill_sprom_path_r45(sprom, prefix, fallback);
- break;
- case 8:
- case 9:
- bcm47xx_fill_sprom_path_r4589(sprom, prefix, fallback);
- break;
- }
-
- bcm47xx_sprom_fill_auto(sprom, prefix, fallback);
-}
-
-#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
-static int bcm47xx_get_sprom_ssb(struct ssb_bus *bus, struct ssb_sprom *out)
-{
- char prefix[10];
-
- switch (bus->bustype) {
- case SSB_BUSTYPE_SSB:
- bcm47xx_fill_sprom(out, NULL, false);
- return 0;
- case SSB_BUSTYPE_PCI:
- memset(out, 0, sizeof(struct ssb_sprom));
- snprintf(prefix, sizeof(prefix), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
- bcm47xx_fill_sprom(out, prefix, false);
- return 0;
- default:
- pr_warn("Unable to fill SPROM for given bustype.\n");
- return -EINVAL;
- }
-}
-#endif
-
-#if IS_BUILTIN(CONFIG_BCMA)
-/*
- * Having many NVRAM entries for PCI devices led to repeating prefixes like
- * pci/1/1/ all the time and wasting flash space. So at some point Broadcom
- * decided to introduce prefixes like 0: 1: 2: etc.
- * If we find e.g. devpath0=pci/2/1 or devpath0=pci/2/1/ we should use 0:
- * instead of pci/2/1/.
- */
-static void bcm47xx_sprom_apply_prefix_alias(char *prefix, size_t prefix_size)
-{
- size_t prefix_len = strlen(prefix);
- size_t short_len = prefix_len - 1;
- char nvram_var[10];
- char buf[20];
- int i;
-
- /* Passed prefix has to end with a slash */
- if (prefix_len <= 0 || prefix[prefix_len - 1] != '/')
- return;
-
- for (i = 0; i < 3; i++) {
- if (snprintf(nvram_var, sizeof(nvram_var), "devpath%d", i) <= 0)
- continue;
- if (bcm47xx_nvram_getenv(nvram_var, buf, sizeof(buf)) < 0)
- continue;
- if (!strcmp(buf, prefix) ||
- (short_len && strlen(buf) == short_len && !strncmp(buf, prefix, short_len))) {
- snprintf(prefix, prefix_size, "%d:", i);
- return;
- }
- }
-}
-
-static int bcm47xx_get_sprom_bcma(struct bcma_bus *bus, struct ssb_sprom *out)
-{
- struct bcma_boardinfo *binfo = &bus->boardinfo;
- struct bcma_device *core;
- char buf[10];
- char *prefix;
- bool fallback = false;
-
- switch (bus->hosttype) {
- case BCMA_HOSTTYPE_PCI:
- memset(out, 0, sizeof(struct ssb_sprom));
- /* On BCM47XX all PCI buses share the same domain */
- if (config_enabled(CONFIG_BCM47XX))
- snprintf(buf, sizeof(buf), "pci/%u/%u/",
- bus->host_pci->bus->number + 1,
- PCI_SLOT(bus->host_pci->devfn));
- else
- snprintf(buf, sizeof(buf), "pci/%u/%u/",
- pci_domain_nr(bus->host_pci->bus) + 1,
- bus->host_pci->bus->number);
- bcm47xx_sprom_apply_prefix_alias(buf, sizeof(buf));
- prefix = buf;
- break;
- case BCMA_HOSTTYPE_SOC:
- memset(out, 0, sizeof(struct ssb_sprom));
- core = bcma_find_core(bus, BCMA_CORE_80211);
- if (core) {
- snprintf(buf, sizeof(buf), "sb/%u/",
- core->core_index);
- prefix = buf;
- fallback = true;
- } else {
- prefix = NULL;
- }
- break;
- default:
- pr_warn("Unable to fill SPROM for given bustype.\n");
- return -EINVAL;
- }
-
- nvram_read_u16(prefix, NULL, "boardvendor", &binfo->vendor, 0, true);
- if (!binfo->vendor)
- binfo->vendor = SSB_BOARDVENDOR_BCM;
- nvram_read_u16(prefix, NULL, "boardtype", &binfo->type, 0, true);
-
- bcm47xx_fill_sprom(out, prefix, fallback);
-
- return 0;
-}
-#endif
-
-static unsigned int bcm47xx_sprom_registered;
-
-/*
- * On bcm47xx we need to register SPROM fallback handler very early, so we can't
- * use anything like platform device / driver for this.
- */
-int bcm47xx_sprom_register_fallbacks(void)
-{
- if (bcm47xx_sprom_registered)
- return 0;
-
-#if IS_BUILTIN(CONFIG_SSB) && IS_ENABLED(CONFIG_SSB_SPROM)
- if (ssb_arch_register_fallback_sprom(&bcm47xx_get_sprom_ssb))
- pr_warn("Failed to register ssb SPROM handler\n");
-#endif
-
-#if IS_BUILTIN(CONFIG_BCMA)
- if (bcma_arch_register_fallback_sprom(&bcm47xx_get_sprom_bcma))
- pr_warn("Failed to register bcma SPROM handler\n");
-#endif
-
- bcm47xx_sprom_registered = 1;
-
- return 0;
-}
-
-fs_initcall(bcm47xx_sprom_register_fallbacks);
diff --git a/target/linux/bcm53xx/patches-4.4/020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch b/target/linux/bcm53xx/patches-4.4/020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch
deleted file mode 100644
index 30acc8c311..0000000000
--- a/target/linux/bcm53xx/patches-4.4/020-ARM-BCM5301X-remove-workaround-imprecise-abort-fault.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 937b12306ea79044c86f2e69b3061c7279245825 Mon Sep 17 00:00:00 2001
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Thu, 15 Oct 2015 12:32:22 +0200
-Subject: [PATCH] ARM: BCM5301X: remove workaround imprecise abort fault
- handler
-
-This is not needed anymore. Handling a potentially pending imprecise external
-abort left behind by the bootloader is now done in a slightly safer way inside
-the common ARM startup code.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Tested-by: Tyler Baker <tyler.baker@linaro.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/mach-bcm/bcm_5301x.c | 35 -----------------------------------
- 1 file changed, 35 deletions(-)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -9,40 +9,6 @@
- #include <asm/hardware/cache-l2x0.h>
-
- #include <asm/mach/arch.h>
--#include <asm/siginfo.h>
--#include <asm/signal.h>
--
--
--static bool first_fault = true;
--
--static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
-- struct pt_regs *regs)
--{
-- if ((fsr == 0x1406 || fsr == 0x1c06) && first_fault) {
-- first_fault = false;
--
-- /*
-- * These faults with codes 0x1406 (BCM4709) or 0x1c06 happens
-- * for no good reason, possibly left over from the CFE boot
-- * loader.
-- */
-- pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
-- addr, fsr);
--
-- /* Returning non-zero causes fault display and panic */
-- return 0;
-- }
--
-- /* Others should cause a fault */
-- return 1;
--}
--
--static void __init bcm5301x_init_early(void)
--{
-- /* Install our hook */
-- hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
-- "imprecise external abort");
--}
-
- static const char *const bcm5301x_dt_compat[] __initconst = {
- "brcm,bcm4708",
-@@ -52,6 +18,5 @@ static const char *const bcm5301x_dt_com
- DT_MACHINE_START(BCM5301X, "BCM5301X")
- .l2c_aux_val = 0,
- .l2c_aux_mask = ~0,
-- .init_early = bcm5301x_init_early,
- .dt_compat = bcm5301x_dt_compat,
- MACHINE_END
diff --git a/target/linux/bcm53xx/patches-4.4/021-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch b/target/linux/bcm53xx/patches-4.4/021-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch
deleted file mode 100644
index 8169da90c5..0000000000
--- a/target/linux/bcm53xx/patches-4.4/021-ARM-BCM5310X-activate-erratas-needed-for-SoC.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From f4ce7effe2253a325f8ba182903cbdf0d8698593 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 21 Nov 2015 15:29:47 +0100
-Subject: [PATCH] ARM: BCM5310X: activate erratas needed for SoC
-
-The BCM4708 I have, which is probably the first generation which got
-to the consumer market, is using a ARM Cortex-A9 rev r3p0 and a
-L2C-310 rev r3p2 L2 cache controller. There are 3 workarounds for known
-erratas in the Linux kernel which could be activated and will be in
-this patch. There are currently no workarounds which have to be
-activated for the L2C-310 rev r3p2 in Linux.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/mach-bcm/Kconfig | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -52,6 +52,10 @@ config ARCH_BCM_NSP
- config ARCH_BCM_5301X
- bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
- select ARCH_BCM_IPROC
-+ select ARM_ERRATA_754322
-+ select ARM_ERRATA_775420
-+ select ARM_ERRATA_764369 if SMP
-+
- help
- Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
-
diff --git a/target/linux/bcm53xx/patches-4.4/022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch b/target/linux/bcm53xx/patches-4.4/022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch
deleted file mode 100644
index fecaec4b49..0000000000
--- a/target/linux/bcm53xx/patches-4.4/022-ARM-BCM-Clean-up-SMP-support-for-Broadcom-Kona.patch
+++ /dev/null
@@ -1,254 +0,0 @@
-From b5989f783de046577067fe356b1bb76cae07e867 Mon Sep 17 00:00:00 2001
-From: Kapil Hali <kapilh@broadcom.com>
-Date: Sat, 5 Dec 2015 06:53:41 -0500
-Subject: [PATCH] ARM: BCM: Clean up SMP support for Broadcom Kona
-
-These changes cleans up SMP implementaion for Broadcom's
-Kona SoC which are required for handling SMP for iProc
-family of SoCs at a single place for BCM NSP and BCM Kona.
-
-Signed-off-by: Kapil Hali <kapilh@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bindings/arm/bcm/brcm,bcm11351-cpu-method.txt | 12 ++--
- arch/arm/boot/dts/bcm11351.dtsi | 4 +-
- arch/arm/boot/dts/bcm21664.dtsi | 4 +-
- arch/arm/mach-bcm/kona_smp.c | 82 ++++++++++++++--------
- 4 files changed, 64 insertions(+), 38 deletions(-)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method.txt
-@@ -1,17 +1,17 @@
- Broadcom Kona Family CPU Enable Method
- --------------------------------------
- This binding defines the enable method used for starting secondary
--CPUs in the following Broadcom SoCs:
-+CPU in the following Broadcom SoCs:
- BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664
-
- The enable method is specified by defining the following required
--properties in the "cpus" device tree node:
-+properties in the corresponding secondary "cpu" device tree node:
- - enable-method = "brcm,bcm11351-cpu-method";
- - secondary-boot-reg = <...>;
-
- The secondary-boot-reg property is a u32 value that specifies the
--physical address of the register used to request the ROM holding pen
--code release a secondary CPU. The value written to the register is
-+physical address of the register used to request the ROM code
-+release a secondary CPU. The value written to the register is
- formed by encoding the target CPU id into the low bits of the
- physical start address it should jump to.
-
-@@ -19,8 +19,6 @@ Example:
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-- enable-method = "brcm,bcm11351-cpu-method";
-- secondary-boot-reg = <0x3500417c>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
-@@ -31,6 +29,8 @@ Example:
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
-+ enable-method = "brcm,bcm11351-cpu-method";
-+ secondary-boot-reg = <0x3500417c>;
- reg = <1>;
- };
- };
---- a/arch/arm/boot/dts/bcm11351.dtsi
-+++ b/arch/arm/boot/dts/bcm11351.dtsi
-@@ -30,8 +30,6 @@
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-- enable-method = "brcm,bcm11351-cpu-method";
-- secondary-boot-reg = <0x3500417c>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
-@@ -42,6 +40,8 @@
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
-+ enable-method = "brcm,bcm11351-cpu-method";
-+ secondary-boot-reg = <0x3500417c>;
- reg = <1>;
- };
- };
---- a/arch/arm/boot/dts/bcm21664.dtsi
-+++ b/arch/arm/boot/dts/bcm21664.dtsi
-@@ -30,8 +30,6 @@
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-- enable-method = "brcm,bcm11351-cpu-method";
-- secondary-boot-reg = <0x35004178>;
-
- cpu0: cpu@0 {
- device_type = "cpu";
-@@ -42,6 +40,8 @@
- cpu1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
-+ enable-method = "brcm,bcm11351-cpu-method";
-+ secondary-boot-reg = <0x35004178>;
- reg = <1>;
- };
- };
---- a/arch/arm/mach-bcm/kona_smp.c
-+++ b/arch/arm/mach-bcm/kona_smp.c
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2014 Broadcom Corporation
-+ * Copyright (C) 2014-2015 Broadcom Corporation
- * Copyright 2014 Linaro Limited
- *
- * This program is free software; you can redistribute it and/or
-@@ -30,9 +30,10 @@
-
- /* Name of device node property defining secondary boot register location */
- #define OF_SECONDARY_BOOT "secondary-boot-reg"
-+#define MPIDR_CPUID_BITMASK 0x3
-
- /* I/O address of register used to coordinate secondary core startup */
--static u32 secondary_boot;
-+static u32 secondary_boot_addr;
-
- /*
- * Enable the Cortex A9 Snoop Control Unit
-@@ -78,44 +79,68 @@ static int __init scu_a9_enable(void)
- static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
- {
- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-- struct device_node *node;
-+ struct device_node *cpus_node = NULL;
-+ struct device_node *cpu_node = NULL;
- int ret;
-
-- BUG_ON(secondary_boot); /* We're called only once */
--
- /*
- * This function is only called via smp_ops->smp_prepare_cpu().
- * That only happens if a "/cpus" device tree node exists
- * and has an "enable-method" property that selects the SMP
- * operations defined herein.
- */
-- node = of_find_node_by_path("/cpus");
-- BUG_ON(!node);
--
-- /*
-- * Our secondary enable method requires a "secondary-boot-reg"
-- * property to specify a register address used to request the
-- * ROM code boot a secondary code. If we have any trouble
-- * getting this we fall back to uniprocessor mode.
-- */
-- if (of_property_read_u32(node, OF_SECONDARY_BOOT, &secondary_boot)) {
-- pr_err("%s: missing/invalid " OF_SECONDARY_BOOT " property\n",
-- node->name);
-- ret = -ENOENT; /* Arrange to disable SMP */
-- goto out;
-+ cpus_node = of_find_node_by_path("/cpus");
-+ if (!cpus_node)
-+ return;
-+
-+ for_each_child_of_node(cpus_node, cpu_node) {
-+ u32 cpuid;
-+
-+ if (of_node_cmp(cpu_node->type, "cpu"))
-+ continue;
-+
-+ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
-+ pr_debug("%s: missing reg property\n",
-+ cpu_node->full_name);
-+ ret = -ENOENT;
-+ goto out;
-+ }
-+
-+ /*
-+ * "secondary-boot-reg" property should be defined only
-+ * for secondary cpu
-+ */
-+ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
-+ /*
-+ * Our secondary enable method requires a
-+ * "secondary-boot-reg" property to specify a register
-+ * address used to request the ROM code boot a secondary
-+ * core. If we have any trouble getting this we fall
-+ * back to uniprocessor mode.
-+ */
-+ if (of_property_read_u32(cpu_node,
-+ OF_SECONDARY_BOOT,
-+ &secondary_boot_addr)) {
-+ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
-+ cpu_node->name);
-+ ret = -ENOENT;
-+ goto out;
-+ }
-+ }
- }
-
- /*
-- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
-+ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
- * returned, the SoC reported a uniprocessor configuration.
- * We bail on any other error.
- */
- ret = scu_a9_enable();
- out:
-- of_node_put(node);
-+ of_node_put(cpu_node);
-+ of_node_put(cpus_node);
-+
- if (ret) {
- /* Update the CPU present map to reflect uniprocessor mode */
-- BUG_ON(ret != -ENOENT);
- pr_warn("disabling SMP\n");
- init_cpu_present(&only_cpu_0);
- }
-@@ -139,7 +164,7 @@ out:
- * - Wait for the secondary boot register to be re-written, which
- * indicates the secondary core has started.
- */
--static int bcm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
- {
- void __iomem *boot_reg;
- phys_addr_t boot_func;
-@@ -154,15 +179,16 @@ static int bcm_boot_secondary(unsigned i
- return -EINVAL;
- }
-
-- if (!secondary_boot) {
-+ if (!secondary_boot_addr) {
- pr_err("required secondary boot register not specified\n");
- return -EINVAL;
- }
-
-- boot_reg = ioremap_nocache((phys_addr_t)secondary_boot, sizeof(u32));
-+ boot_reg = ioremap_nocache(
-+ (phys_addr_t)secondary_boot_addr, sizeof(u32));
- if (!boot_reg) {
- pr_err("unable to map boot register for cpu %u\n", cpu_id);
-- return -ENOSYS;
-+ return -ENOMEM;
- }
-
- /*
-@@ -191,12 +217,12 @@ static int bcm_boot_secondary(unsigned i
-
- pr_err("timeout waiting for cpu %u to start\n", cpu_id);
-
-- return -ENOSYS;
-+ return -ENXIO;
- }
-
- static struct smp_operations bcm_smp_ops __initdata = {
- .smp_prepare_cpus = bcm_smp_prepare_cpus,
-- .smp_boot_secondary = bcm_boot_secondary,
-+ .smp_boot_secondary = kona_boot_secondary,
- };
- CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
- &bcm_smp_ops);
diff --git a/target/linux/bcm53xx/patches-4.4/023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch b/target/linux/bcm53xx/patches-4.4/023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
deleted file mode 100644
index 5fbf213700..0000000000
--- a/target/linux/bcm53xx/patches-4.4/023-ARM-BCM-Add-SMP-support-for-Broadcom-NSP.patch
+++ /dev/null
@@ -1,585 +0,0 @@
-From 55be958cd27439a58c4d9369d6fe2a1f83efdaa6 Mon Sep 17 00:00:00 2001
-From: Kapil Hali <kapilh@broadcom.com>
-Date: Sat, 5 Dec 2015 06:53:43 -0500
-Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom NSP
-
-Add SMP support for Broadcom's Northstar Plus SoC
-cpu enable method. This changes also consolidates
-iProc family's - BCM NSP and BCM Kona, platform
-SMP handling in a common file.
-
-Northstar Plus SoC is based on ARM Cortex-A9
-revision r3p0 which requires configuration for ARM
-Errata 764369 for SMP. This change adds the needed
-configuration option.
-
-Signed-off-by: Kapil Hali <kapilh@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/mach-bcm/Kconfig | 2 +
- arch/arm/mach-bcm/Makefile | 8 +-
- arch/arm/mach-bcm/kona_smp.c | 228 ----------------------------------
- arch/arm/mach-bcm/platsmp.c | 290 +++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 298 insertions(+), 230 deletions(-)
- delete mode 100644 arch/arm/mach-bcm/kona_smp.c
- create mode 100644 arch/arm/mach-bcm/platsmp.c
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -40,6 +40,8 @@ config ARCH_BCM_NSP
- select ARCH_BCM_IPROC
- select ARM_ERRATA_754322
- select ARM_ERRATA_775420
-+ select ARM_ERRATA_764369 if SMP
-+ select HAVE_SMP
- help
- Support for Broadcom Northstar Plus SoC.
- Broadcom Northstar Plus family of SoCs are used for switching control
---- a/arch/arm/mach-bcm/Makefile
-+++ b/arch/arm/mach-bcm/Makefile
-@@ -14,7 +14,11 @@
- obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
-
- # Northstar Plus
--obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
-+obj-$(CONFIG_ARCH_BCM_NSP) += bcm_nsp.o
-+
-+ifeq ($(CONFIG_ARCH_BCM_NSP),y)
-+obj-$(CONFIG_SMP) += platsmp.o
-+endif
-
- # BCM281XX
- obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
-@@ -23,7 +27,7 @@ obj-$(CONFIG_ARCH_BCM_281XX) += board_bc
- obj-$(CONFIG_ARCH_BCM_21664) += board_bcm21664.o
-
- # BCM281XX and BCM21664 SMP support
--obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += kona_smp.o
-+obj-$(CONFIG_ARCH_BCM_MOBILE_SMP) += platsmp.o
-
- # BCM281XX and BCM21664 L2 cache control
- obj-$(CONFIG_ARCH_BCM_MOBILE_L2_CACHE) += kona_l2_cache.o
---- a/arch/arm/mach-bcm/kona_smp.c
-+++ /dev/null
-@@ -1,228 +0,0 @@
--/*
-- * Copyright (C) 2014-2015 Broadcom Corporation
-- * Copyright 2014 Linaro Limited
-- *
-- * This program is free software; you can redistribute it and/or
-- * modify it under the terms of the GNU General Public License as
-- * published by the Free Software Foundation version 2.
-- *
-- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
-- * kind, whether express or implied; without even the implied warranty
-- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- * GNU General Public License for more details.
-- */
--
--#include <linux/init.h>
--#include <linux/errno.h>
--#include <linux/io.h>
--#include <linux/of.h>
--#include <linux/sched.h>
--
--#include <asm/smp.h>
--#include <asm/smp_plat.h>
--#include <asm/smp_scu.h>
--
--/* Size of mapped Cortex A9 SCU address space */
--#define CORTEX_A9_SCU_SIZE 0x58
--
--#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
--#define BOOT_ADDR_CPUID_MASK 0x3
--
--/* Name of device node property defining secondary boot register location */
--#define OF_SECONDARY_BOOT "secondary-boot-reg"
--#define MPIDR_CPUID_BITMASK 0x3
--
--/* I/O address of register used to coordinate secondary core startup */
--static u32 secondary_boot_addr;
--
--/*
-- * Enable the Cortex A9 Snoop Control Unit
-- *
-- * By the time this is called we already know there are multiple
-- * cores present. We assume we're running on a Cortex A9 processor,
-- * so any trouble getting the base address register or getting the
-- * SCU base is a problem.
-- *
-- * Return 0 if successful or an error code otherwise.
-- */
--static int __init scu_a9_enable(void)
--{
-- unsigned long config_base;
-- void __iomem *scu_base;
--
-- if (!scu_a9_has_base()) {
-- pr_err("no configuration base address register!\n");
-- return -ENXIO;
-- }
--
-- /* Config base address register value is zero for uniprocessor */
-- config_base = scu_a9_get_base();
-- if (!config_base) {
-- pr_err("hardware reports only one core\n");
-- return -ENOENT;
-- }
--
-- scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
-- if (!scu_base) {
-- pr_err("failed to remap config base (%lu/%u) for SCU\n",
-- config_base, CORTEX_A9_SCU_SIZE);
-- return -ENOMEM;
-- }
--
-- scu_enable(scu_base);
--
-- iounmap(scu_base); /* That's the last we'll need of this */
--
-- return 0;
--}
--
--static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
--{
-- static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-- struct device_node *cpus_node = NULL;
-- struct device_node *cpu_node = NULL;
-- int ret;
--
-- /*
-- * This function is only called via smp_ops->smp_prepare_cpu().
-- * That only happens if a "/cpus" device tree node exists
-- * and has an "enable-method" property that selects the SMP
-- * operations defined herein.
-- */
-- cpus_node = of_find_node_by_path("/cpus");
-- if (!cpus_node)
-- return;
--
-- for_each_child_of_node(cpus_node, cpu_node) {
-- u32 cpuid;
--
-- if (of_node_cmp(cpu_node->type, "cpu"))
-- continue;
--
-- if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
-- pr_debug("%s: missing reg property\n",
-- cpu_node->full_name);
-- ret = -ENOENT;
-- goto out;
-- }
--
-- /*
-- * "secondary-boot-reg" property should be defined only
-- * for secondary cpu
-- */
-- if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
-- /*
-- * Our secondary enable method requires a
-- * "secondary-boot-reg" property to specify a register
-- * address used to request the ROM code boot a secondary
-- * core. If we have any trouble getting this we fall
-- * back to uniprocessor mode.
-- */
-- if (of_property_read_u32(cpu_node,
-- OF_SECONDARY_BOOT,
-- &secondary_boot_addr)) {
-- pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
-- cpu_node->name);
-- ret = -ENOENT;
-- goto out;
-- }
-- }
-- }
--
-- /*
-- * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
-- * returned, the SoC reported a uniprocessor configuration.
-- * We bail on any other error.
-- */
-- ret = scu_a9_enable();
--out:
-- of_node_put(cpu_node);
-- of_node_put(cpus_node);
--
-- if (ret) {
-- /* Update the CPU present map to reflect uniprocessor mode */
-- pr_warn("disabling SMP\n");
-- init_cpu_present(&only_cpu_0);
-- }
--}
--
--/*
-- * The ROM code has the secondary cores looping, waiting for an event.
-- * When an event occurs each core examines the bottom two bits of the
-- * secondary boot register. When a core finds those bits contain its
-- * own core id, it performs initialization, including computing its boot
-- * address by clearing the boot register value's bottom two bits. The
-- * core signals that it is beginning its execution by writing its boot
-- * address back to the secondary boot register, and finally jumps to
-- * that address.
-- *
-- * So to start a core executing we need to:
-- * - Encode the (hardware) CPU id with the bottom bits of the secondary
-- * start address.
-- * - Write that value into the secondary boot register.
-- * - Generate an event to wake up the secondary CPU(s).
-- * - Wait for the secondary boot register to be re-written, which
-- * indicates the secondary core has started.
-- */
--static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
--{
-- void __iomem *boot_reg;
-- phys_addr_t boot_func;
-- u64 start_clock;
-- u32 cpu_id;
-- u32 boot_val;
-- bool timeout = false;
--
-- cpu_id = cpu_logical_map(cpu);
-- if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
-- pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
-- return -EINVAL;
-- }
--
-- if (!secondary_boot_addr) {
-- pr_err("required secondary boot register not specified\n");
-- return -EINVAL;
-- }
--
-- boot_reg = ioremap_nocache(
-- (phys_addr_t)secondary_boot_addr, sizeof(u32));
-- if (!boot_reg) {
-- pr_err("unable to map boot register for cpu %u\n", cpu_id);
-- return -ENOMEM;
-- }
--
-- /*
-- * Secondary cores will start in secondary_startup(),
-- * defined in "arch/arm/kernel/head.S"
-- */
-- boot_func = virt_to_phys(secondary_startup);
-- BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
-- BUG_ON(boot_func > (phys_addr_t)U32_MAX);
--
-- /* The core to start is encoded in the low bits */
-- boot_val = (u32)boot_func | cpu_id;
-- writel_relaxed(boot_val, boot_reg);
--
-- sev();
--
-- /* The low bits will be cleared once the core has started */
-- start_clock = local_clock();
-- while (!timeout && readl_relaxed(boot_reg) == boot_val)
-- timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
--
-- iounmap(boot_reg);
--
-- if (!timeout)
-- return 0;
--
-- pr_err("timeout waiting for cpu %u to start\n", cpu_id);
--
-- return -ENXIO;
--}
--
--static struct smp_operations bcm_smp_ops __initdata = {
-- .smp_prepare_cpus = bcm_smp_prepare_cpus,
-- .smp_boot_secondary = kona_boot_secondary,
--};
--CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
-- &bcm_smp_ops);
---- /dev/null
-+++ b/arch/arm/mach-bcm/platsmp.c
-@@ -0,0 +1,290 @@
-+/*
-+ * Copyright (C) 2014-2015 Broadcom Corporation
-+ * Copyright 2014 Linaro Limited
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation version 2.
-+ *
-+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
-+ * kind, whether express or implied; without even the implied warranty
-+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/cpumask.h>
-+#include <linux/delay.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/jiffies.h>
-+#include <linux/of.h>
-+#include <linux/sched.h>
-+#include <linux/smp.h>
-+
-+#include <asm/cacheflush.h>
-+#include <asm/smp.h>
-+#include <asm/smp_plat.h>
-+#include <asm/smp_scu.h>
-+
-+/* Size of mapped Cortex A9 SCU address space */
-+#define CORTEX_A9_SCU_SIZE 0x58
-+
-+#define SECONDARY_TIMEOUT_NS NSEC_PER_MSEC /* 1 msec (in nanoseconds) */
-+#define BOOT_ADDR_CPUID_MASK 0x3
-+
-+/* Name of device node property defining secondary boot register location */
-+#define OF_SECONDARY_BOOT "secondary-boot-reg"
-+#define MPIDR_CPUID_BITMASK 0x3
-+
-+/* I/O address of register used to coordinate secondary core startup */
-+static u32 secondary_boot_addr;
-+
-+/*
-+ * Enable the Cortex A9 Snoop Control Unit
-+ *
-+ * By the time this is called we already know there are multiple
-+ * cores present. We assume we're running on a Cortex A9 processor,
-+ * so any trouble getting the base address register or getting the
-+ * SCU base is a problem.
-+ *
-+ * Return 0 if successful or an error code otherwise.
-+ */
-+static int __init scu_a9_enable(void)
-+{
-+ unsigned long config_base;
-+ void __iomem *scu_base;
-+
-+ if (!scu_a9_has_base()) {
-+ pr_err("no configuration base address register!\n");
-+ return -ENXIO;
-+ }
-+
-+ /* Config base address register value is zero for uniprocessor */
-+ config_base = scu_a9_get_base();
-+ if (!config_base) {
-+ pr_err("hardware reports only one core\n");
-+ return -ENOENT;
-+ }
-+
-+ scu_base = ioremap((phys_addr_t)config_base, CORTEX_A9_SCU_SIZE);
-+ if (!scu_base) {
-+ pr_err("failed to remap config base (%lu/%u) for SCU\n",
-+ config_base, CORTEX_A9_SCU_SIZE);
-+ return -ENOMEM;
-+ }
-+
-+ scu_enable(scu_base);
-+
-+ iounmap(scu_base); /* That's the last we'll need of this */
-+
-+ return 0;
-+}
-+
-+static int nsp_write_lut(void)
-+{
-+ void __iomem *sku_rom_lut;
-+ phys_addr_t secondary_startup_phy;
-+
-+ if (!secondary_boot_addr) {
-+ pr_warn("required secondary boot register not specified\n");
-+ return -EINVAL;
-+ }
-+
-+ sku_rom_lut = ioremap_nocache((phys_addr_t)secondary_boot_addr,
-+ sizeof(secondary_boot_addr));
-+ if (!sku_rom_lut) {
-+ pr_warn("unable to ioremap SKU-ROM LUT register\n");
-+ return -ENOMEM;
-+ }
-+
-+ secondary_startup_phy = virt_to_phys(secondary_startup);
-+ BUG_ON(secondary_startup_phy > (phys_addr_t)U32_MAX);
-+
-+ writel_relaxed(secondary_startup_phy, sku_rom_lut);
-+
-+ /* Ensure the write is visible to the secondary core */
-+ smp_wmb();
-+
-+ iounmap(sku_rom_lut);
-+
-+ return 0;
-+}
-+
-+static void __init bcm_smp_prepare_cpus(unsigned int max_cpus)
-+{
-+ static cpumask_t only_cpu_0 = { CPU_BITS_CPU0 };
-+ struct device_node *cpus_node = NULL;
-+ struct device_node *cpu_node = NULL;
-+ int ret;
-+
-+ /*
-+ * This function is only called via smp_ops->smp_prepare_cpu().
-+ * That only happens if a "/cpus" device tree node exists
-+ * and has an "enable-method" property that selects the SMP
-+ * operations defined herein.
-+ */
-+ cpus_node = of_find_node_by_path("/cpus");
-+ if (!cpus_node)
-+ return;
-+
-+ for_each_child_of_node(cpus_node, cpu_node) {
-+ u32 cpuid;
-+
-+ if (of_node_cmp(cpu_node->type, "cpu"))
-+ continue;
-+
-+ if (of_property_read_u32(cpu_node, "reg", &cpuid)) {
-+ pr_debug("%s: missing reg property\n",
-+ cpu_node->full_name);
-+ ret = -ENOENT;
-+ goto out;
-+ }
-+
-+ /*
-+ * "secondary-boot-reg" property should be defined only
-+ * for secondary cpu
-+ */
-+ if ((cpuid & MPIDR_CPUID_BITMASK) == 1) {
-+ /*
-+ * Our secondary enable method requires a
-+ * "secondary-boot-reg" property to specify a register
-+ * address used to request the ROM code boot a secondary
-+ * core. If we have any trouble getting this we fall
-+ * back to uniprocessor mode.
-+ */
-+ if (of_property_read_u32(cpu_node,
-+ OF_SECONDARY_BOOT,
-+ &secondary_boot_addr)) {
-+ pr_warn("%s: no" OF_SECONDARY_BOOT "property\n",
-+ cpu_node->name);
-+ ret = -ENOENT;
-+ goto out;
-+ }
-+ }
-+ }
-+
-+ /*
-+ * Enable the SCU on Cortex A9 based SoCs. If -ENOENT is
-+ * returned, the SoC reported a uniprocessor configuration.
-+ * We bail on any other error.
-+ */
-+ ret = scu_a9_enable();
-+out:
-+ of_node_put(cpu_node);
-+ of_node_put(cpus_node);
-+
-+ if (ret) {
-+ /* Update the CPU present map to reflect uniprocessor mode */
-+ pr_warn("disabling SMP\n");
-+ init_cpu_present(&only_cpu_0);
-+ }
-+}
-+
-+/*
-+ * The ROM code has the secondary cores looping, waiting for an event.
-+ * When an event occurs each core examines the bottom two bits of the
-+ * secondary boot register. When a core finds those bits contain its
-+ * own core id, it performs initialization, including computing its boot
-+ * address by clearing the boot register value's bottom two bits. The
-+ * core signals that it is beginning its execution by writing its boot
-+ * address back to the secondary boot register, and finally jumps to
-+ * that address.
-+ *
-+ * So to start a core executing we need to:
-+ * - Encode the (hardware) CPU id with the bottom bits of the secondary
-+ * start address.
-+ * - Write that value into the secondary boot register.
-+ * - Generate an event to wake up the secondary CPU(s).
-+ * - Wait for the secondary boot register to be re-written, which
-+ * indicates the secondary core has started.
-+ */
-+static int kona_boot_secondary(unsigned int cpu, struct task_struct *idle)
-+{
-+ void __iomem *boot_reg;
-+ phys_addr_t boot_func;
-+ u64 start_clock;
-+ u32 cpu_id;
-+ u32 boot_val;
-+ bool timeout = false;
-+
-+ cpu_id = cpu_logical_map(cpu);
-+ if (cpu_id & ~BOOT_ADDR_CPUID_MASK) {
-+ pr_err("bad cpu id (%u > %u)\n", cpu_id, BOOT_ADDR_CPUID_MASK);
-+ return -EINVAL;
-+ }
-+
-+ if (!secondary_boot_addr) {
-+ pr_err("required secondary boot register not specified\n");
-+ return -EINVAL;
-+ }
-+
-+ boot_reg = ioremap_nocache(
-+ (phys_addr_t)secondary_boot_addr, sizeof(u32));
-+ if (!boot_reg) {
-+ pr_err("unable to map boot register for cpu %u\n", cpu_id);
-+ return -ENOMEM;
-+ }
-+
-+ /*
-+ * Secondary cores will start in secondary_startup(),
-+ * defined in "arch/arm/kernel/head.S"
-+ */
-+ boot_func = virt_to_phys(secondary_startup);
-+ BUG_ON(boot_func & BOOT_ADDR_CPUID_MASK);
-+ BUG_ON(boot_func > (phys_addr_t)U32_MAX);
-+
-+ /* The core to start is encoded in the low bits */
-+ boot_val = (u32)boot_func | cpu_id;
-+ writel_relaxed(boot_val, boot_reg);
-+
-+ sev();
-+
-+ /* The low bits will be cleared once the core has started */
-+ start_clock = local_clock();
-+ while (!timeout && readl_relaxed(boot_reg) == boot_val)
-+ timeout = local_clock() - start_clock > SECONDARY_TIMEOUT_NS;
-+
-+ iounmap(boot_reg);
-+
-+ if (!timeout)
-+ return 0;
-+
-+ pr_err("timeout waiting for cpu %u to start\n", cpu_id);
-+
-+ return -ENXIO;
-+}
-+
-+static int nsp_boot_secondary(unsigned int cpu, struct task_struct *idle)
-+{
-+ int ret;
-+
-+ /*
-+ * After wake up, secondary core branches to the startup
-+ * address programmed at SKU ROM LUT location.
-+ */
-+ ret = nsp_write_lut();
-+ if (ret) {
-+ pr_err("unable to write startup addr to SKU ROM LUT\n");
-+ goto out;
-+ }
-+
-+ /* Send a CPU wakeup interrupt to the secondary core */
-+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-+
-+out:
-+ return ret;
-+}
-+
-+static struct smp_operations bcm_smp_ops __initdata = {
-+ .smp_prepare_cpus = bcm_smp_prepare_cpus,
-+ .smp_boot_secondary = kona_boot_secondary,
-+};
-+CPU_METHOD_OF_DECLARE(bcm_smp_bcm281xx, "brcm,bcm11351-cpu-method",
-+ &bcm_smp_ops);
-+
-+struct smp_operations nsp_smp_ops __initdata = {
-+ .smp_prepare_cpus = bcm_smp_prepare_cpus,
-+ .smp_boot_secondary = nsp_boot_secondary,
-+};
-+CPU_METHOD_OF_DECLARE(bcm_smp_nsp, "brcm,bcm-nsp-smp", &nsp_smp_ops);
diff --git a/target/linux/bcm53xx/patches-4.4/024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch b/target/linux/bcm53xx/patches-4.4/024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
deleted file mode 100644
index ca75fad53b..0000000000
--- a/target/linux/bcm53xx/patches-4.4/024-ARM-BCM-Add-SMP-support-for-Broadcom-4708.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 99498905ac1fbc73a97d27d21ea449fb939072e3 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Tue, 1 Dec 2015 11:24:09 -0500
-Subject: [PATCH] ARM: BCM: Add SMP support for Broadcom 4708
-
-Add SMP support for Broadcom's 4708 SoCs.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Tested-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Kapil Hali <kapilh@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708.dtsi | 2 ++
- arch/arm/mach-bcm/Kconfig | 1 +
- arch/arm/mach-bcm/Makefile | 3 +++
- 3 files changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -15,6 +15,7 @@
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-+ enable-method = "brcm,bcm-nsp-smp";
-
- cpu@0 {
- device_type = "cpu";
-@@ -27,6 +28,7 @@
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- next-level-cache = <&L2>;
-+ secondary-boot-reg = <0xffff0400>;
- reg = <0x1>;
- };
- };
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -57,6 +57,7 @@ config ARCH_BCM_5301X
- select ARM_ERRATA_754322
- select ARM_ERRATA_775420
- select ARM_ERRATA_764369 if SMP
-+ select HAVE_SMP
-
- help
- Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
---- a/arch/arm/mach-bcm/Makefile
-+++ b/arch/arm/mach-bcm/Makefile
-@@ -43,6 +43,9 @@ obj-$(CONFIG_ARCH_BCM2835) += board_bcm2
-
- # BCM5301X
- obj-$(CONFIG_ARCH_BCM_5301X) += bcm_5301x.o
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+obj-$(CONFIG_SMP) += platsmp.o
-+endif
-
- # BCM63XXx
- ifeq ($(CONFIG_ARCH_BCM_63XX),y)
diff --git a/target/linux/bcm53xx/patches-4.4/030-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch b/target/linux/bcm53xx/patches-4.4/030-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
deleted file mode 100644
index c63627d473..0000000000
--- a/target/linux/bcm53xx/patches-4.4/030-ARM-dts-bcm5301x-Add-BCM-SVK-DT-files.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From ccf0b5e37115f8675455632f583d06ea94f43539 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Mon, 2 Nov 2015 13:34:53 -0500
-Subject: [PATCH] ARM: dts: bcm5301x: Add BCM SVK DT files
-
-Add device tree files for Broadcom Northstar based SVKs. Since the
-bcm5301x.dtsi already exists, all that is necessary is the dts files to
-enable the UARTs. With these files, the SVKs are able to boot to shell.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 5 +++-
- arch/arm/boot/dts/bcm94708.dts | 56 +++++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm94709.dts | 56 +++++++++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm953012k.dts | 63 ++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 179 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm94708.dts
- create mode 100644 arch/arm/boot/dts/bcm94709.dts
- create mode 100644 arch/arm/boot/dts/bcm953012k.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -75,7 +75,10 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
-- bcm4709-netgear-r8000.dtb
-+ bcm4709-netgear-r8000.dtb \
-+ bcm94708.dtb \
-+ bcm94709.dtb \
-+ bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -0,0 +1,56 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ model = "NorthStar SVK (BCM94708)";
-+ compatible = "brcm,bcm94708", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -0,0 +1,56 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ model = "NorthStar SVK (BCM94709)";
-+ compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ model = "NorthStar SVK (BCM953012K)";
-+ compatible = "brcm,bcm953012k", "brcm,brcm53012", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ serial1 = &uart1;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x10000000>;
-+ };
-+};
-+
-+&uart0 {
-+ clock-frequency = <62499840>;
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ clock-frequency = <62499840>;
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/031-ARM-dts-enable-clock-support-for-BCM5301X.patch b/target/linux/bcm53xx/patches-4.4/031-ARM-dts-enable-clock-support-for-BCM5301X.patch
deleted file mode 100644
index 165fe7c5cb..0000000000
--- a/target/linux/bcm53xx/patches-4.4/031-ARM-dts-enable-clock-support-for-BCM5301X.patch
+++ /dev/null
@@ -1,174 +0,0 @@
-From cdc36b22f0e4b8badf3db14395f0aa44dcbce4b3 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Fri, 20 Nov 2015 10:17:18 -0500
-Subject: [PATCH] ARM: dts: enable clock support for BCM5301X
-
-Replace current device tree dummy clocks with real clock support for
-Broadcom Northstar SoCs.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Reviewed-by: Ray Jui <rjui@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 92 +++++++++++++++++++++++++++++++----------
- 1 file changed, 71 insertions(+), 21 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -8,6 +8,7 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
-+#include <dt-bindings/clock/bcm-nsp.h>
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
- #include <dt-bindings/interrupt-controller/irq.h>
-@@ -27,7 +28,7 @@
- compatible = "ns16550";
- reg = <0x0300 0x100>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-- clock-frequency = <100000000>;
-+ clocks = <&iprocslow>;
- status = "disabled";
- };
-
-@@ -35,48 +36,55 @@
- compatible = "ns16550";
- reg = <0x0400 0x100>;
- interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-- clock-frequency = <100000000>;
-+ clocks = <&iprocslow>;
- status = "disabled";
- };
- };
-
- mpcore {
- compatible = "simple-bus";
-- ranges = <0x00000000 0x19020000 0x00003000>;
-+ ranges = <0x00000000 0x19000000 0x00023000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
-- scu@0000 {
-+ a9pll: arm_clk@00000 {
-+ #clock-cells = <0>;
-+ compatible = "brcm,nsp-armpll";
-+ clocks = <&osc>;
-+ reg = <0x00000 0x1000>;
-+ };
-+
-+ scu@20000 {
- compatible = "arm,cortex-a9-scu";
-- reg = <0x0000 0x100>;
-+ reg = <0x20000 0x100>;
- };
-
-- timer@0200 {
-+ timer@20200 {
- compatible = "arm,cortex-a9-global-timer";
-- reg = <0x0200 0x100>;
-+ reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
-- clocks = <&clk_periph>;
-+ clocks = <&periph_clk>;
- };
-
-- local-timer@0600 {
-+ local-timer@20600 {
- compatible = "arm,cortex-a9-twd-timer";
-- reg = <0x0600 0x100>;
-+ reg = <0x20600 0x100>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-- clocks = <&clk_periph>;
-+ clocks = <&periph_clk>;
- };
-
-- gic: interrupt-controller@1000 {
-+ gic: interrupt-controller@21000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
-- reg = <0x1000 0x1000>,
-- <0x0100 0x100>;
-+ reg = <0x21000 0x1000>,
-+ <0x20100 0x100>;
- };
-
-- L2: cache-controller@2000 {
-+ L2: cache-controller@22000 {
- compatible = "arm,pl310-cache";
-- reg = <0x2000 0x1000>;
-+ reg = <0x22000 0x1000>;
- cache-unified;
- arm,shared-override;
- prefetch-data = <1>;
-@@ -94,14 +102,37 @@
-
- clocks {
- #address-cells = <1>;
-- #size-cells = <0>;
-+ #size-cells = <1>;
-+ ranges;
-
-- /* As long as we do not have a real clock driver us this
-- * fixed clock */
-- clk_periph: periph {
-+ osc: oscillator {
-+ #clock-cells = <0>;
- compatible = "fixed-clock";
-+ clock-frequency = <25000000>;
-+ };
-+
-+ iprocmed: iprocmed {
- #clock-cells = <0>;
-- clock-frequency = <400000000>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-+ clock-div = <2>;
-+ clock-mult = <1>;
-+ };
-+
-+ iprocslow: iprocslow {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
-+ clock-div = <4>;
-+ clock-mult = <1>;
-+ };
-+
-+ periph_clk: periph_clk {
-+ #clock-cells = <0>;
-+ compatible = "fixed-factor-clock";
-+ clocks = <&a9pll>;
-+ clock-div = <2>;
-+ clock-mult = <1>;
- };
- };
-
-@@ -178,6 +209,25 @@
- };
- };
-
-+ lcpll0: lcpll0@1800c100 {
-+ #clock-cells = <1>;
-+ compatible = "brcm,nsp-lcpll0";
-+ reg = <0x1800c100 0x14>;
-+ clocks = <&osc>;
-+ clock-output-names = "lcpll0", "pcie_phy", "sdio",
-+ "ddr_phy";
-+ };
-+
-+ genpll: genpll@1800c140 {
-+ #clock-cells = <1>;
-+ compatible = "brcm,nsp-genpll";
-+ reg = <0x1800c140 0x24>;
-+ clocks = <&osc>;
-+ clock-output-names = "genpll", "phy", "ethernetclk",
-+ "usbclk", "iprocfast", "sata1",
-+ "sata2";
-+ };
-+
- nand: nand@18028000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/target/linux/bcm53xx/patches-4.4/032-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch b/target/linux/bcm53xx/patches-4.4/032-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
deleted file mode 100644
index 14554a6267..0000000000
--- a/target/linux/bcm53xx/patches-4.4/032-ARM-BCM5301X-Add-missing-Netgear-R8000-LEDs.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 9789f1fd1fd1d0551132778414faf8e2254408c1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 30 Oct 2015 15:44:01 +0100
-Subject: [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add a bunch of LEDs missing for the Netgear R8000: wireless, wps, 5Ghz radio
-and USB LEDs.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 30 +++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -50,6 +50,36 @@
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-+
-+ wireless {
-+ label = "bcm53xx:white:wireless";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:white:wps";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz-2 {
-+ label = "bcm53xx:white:5ghz-2";
-+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:white:usb2";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
- };
-
- gpio-keys {
diff --git a/target/linux/bcm53xx/patches-4.4/033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch b/target/linux/bcm53xx/patches-4.4/033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch
deleted file mode 100644
index ff3fa0b80c..0000000000
--- a/target/linux/bcm53xx/patches-4.4/033-dt-bindings-add-SMP-enable-method-for-Broadcom-NSP.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From fa20071c74be69a1d84df85e5d1e72a40a156b89 Mon Sep 17 00:00:00 2001
-From: Kapil Hali <kapilh@broadcom.com>
-Date: Tue, 1 Dec 2015 11:24:05 -0500
-Subject: [PATCH] dt-bindings: add SMP enable-method for Broadcom NSP
-
-Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
-Northstar Plus CPU to the 32-bit ARM CPU device tree binding
-documentation file and create a new binding documentation for
-Northstar Plus CPU.
-
-Signed-off-by: Kapil Hali <kapilh@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++++++++++++++++++++
- Documentation/devicetree/bindings/arm/cpus.txt | 1 +
- 2 files changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
-@@ -0,0 +1,39 @@
-+Broadcom Northstar Plus SoC CPU Enable Method
-+---------------------------------------------
-+This binding defines the enable method used for starting secondary
-+CPUs in the following Broadcom SoCs:
-+ BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
-+
-+The enable method is specified by defining the following required
-+properties in the "cpus" device tree node:
-+ - enable-method = "brcm,bcm-nsp-smp";
-+ - secondary-boot-reg = <...>;
-+
-+The secondary-boot-reg property is a u32 value that specifies the
-+physical address of the register which should hold the common
-+entry point for a secondary CPU. This entry is cpu node specific
-+and should be added per cpu. E.g., in case of NSP (BCM58625) which
-+is a dual core CPU SoC, this entry should be added to cpu1 node.
-+
-+
-+Example:
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ enable-method = "brcm,bcm-nsp-smp";
-+
-+ cpu0: cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a9";
-+ next-level-cache = <&L2>;
-+ reg = <0>;
-+ };
-+
-+ cpu1: cpu@1 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a9";
-+ next-level-cache = <&L2>;
-+ reg = <1>;
-+ secondary-boot-reg = <0xffff042c>;
-+ };
-+ };
---- a/Documentation/devicetree/bindings/arm/cpus.txt
-+++ b/Documentation/devicetree/bindings/arm/cpus.txt
-@@ -190,6 +190,7 @@ nodes to be present and contain the prop
- "allwinner,sun6i-a31"
- "allwinner,sun8i-a23"
- "arm,psci"
-+ "brcm,bcm-nsp-smp"
- "brcm,brahma-b15"
- "marvell,armada-375-smp"
- "marvell,armada-380-smp"
diff --git a/target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch b/target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
deleted file mode 100644
index eee48f82f9..0000000000
--- a/target/linux/bcm53xx/patches-4.4/034-ARM-BCM5301X-Add-DT-for-D-Link-DIR-885L.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 3ea03a9d512ca19d59315492230e954a1653ff6e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 26 Jan 2016 23:35:16 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for D-Link DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's device based on BCM47094 which is quite similar to BCM4709 except
-for higher CPU frequency. This device has 2 flash memories, it boots
-from serial one and stores firmware on NAND. Other than that we define
-standard stuff like LEDs, buttons and UART.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
-+ bcm47094-dlink-dir-885l.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012k.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for D-Link DIR-885L
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "D-Link DIR-885L";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ nand: nand@18028000 {
-+ nandcs@0 {
-+ partition@0 {
-+ label = "firmware";
-+ reg = <0x00000000 0x08000000>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power-white {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power-amber {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3-white {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:white:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ /* Switch: router / extender */
-+ extender {
-+ label = "Extender";
-+ linux,code = <BTN_0>;
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch b/target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch
deleted file mode 100644
index 3a32c8bb95..0000000000
--- a/target/linux/bcm53xx/patches-4.4/035-ARM-BCM5301X-Set-vcc-gpio-for-USB-controllers-of-few.patch
+++ /dev/null
@@ -1,117 +0,0 @@
-From dd70ccfaa79189feaa78609d44f7c3e7fa1dc6ff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 23 Mar 2016 16:52:47 +0100
-Subject: [PATCH] ARM: BCM5301X: Set vcc-gpio for USB controllers of few
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are few devices that have USB power controlled using GPIO. Linux
-USB host driver (bcma-hcd) already supports this by reading vcc-gpio
-from DT. Set it properly for all known devices.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -139,3 +139,11 @@
- &uart0 {
- status = "okay";
- };
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -24,17 +24,6 @@
- reg = <0x00000000 0x08000000>;
- };
-
-- axi@18000000 {
-- usb3@23000 {
-- reg = <0x00023000 0x1000>;
--
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-- };
-- };
--
- leds {
- compatible = "gpio-leds";
-
-@@ -97,3 +86,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -126,3 +126,8 @@
- };
- };
- };
-+
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -106,3 +106,11 @@
- };
- };
- };
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -109,3 +109,7 @@
- status = "okay";
- clock-frequency = <125000000>;
- };
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -207,6 +207,20 @@
- gpio-controller;
- #gpio-cells = <2>;
- };
-+
-+ usb2: usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ };
-+
-+ usb3: usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ };
- };
-
- lcpll0: lcpll0@1800c100 {
diff --git a/target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch b/target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch
deleted file mode 100644
index abcb00fbab..0000000000
--- a/target/linux/bcm53xx/patches-4.4/036-ARM-BCM5301X-Enable-earlycon-on-tested-devices.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 5a6516ff135555aa53c7d156cd3973b826e011f9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 6 Apr 2016 18:49:55 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable earlycon on tested devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows reporting & debugging problems occurring early in the boot
-process.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-1750DHP (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -17,7 +17,7 @@
- model = "Luxul XWC-1000 (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -17,7 +17,7 @@
- model = "Netgear R6250 V1 (BCM4708)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -17,7 +17,7 @@
- model = "SmartRG SR400ac";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -17,7 +17,7 @@
- model = "Buffalo WZR-600DHP2 (BCM47081)";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -17,7 +17,7 @@
- model = "D-Link DIR-885L";
-
- chosen {
-- bootargs = "console=ttyS0,115200";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -18,6 +18,10 @@
- / {
- interrupt-parent = <&gic>;
-
-+ chosen {
-+ stdout-path = &uart0;
-+ };
-+
- chipcommonA {
- compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
diff --git a/target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch b/target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch
deleted file mode 100644
index 4549396d2b..0000000000
--- a/target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 1b47b98acce2db0da632d056821420b33205b8b2 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 19 Apr 2016 08:56:46 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Controller is present on every BCM4708* board but only few devices have
-serial flash attached so mark it as disabled by default.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
-
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -59,3 +59,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -122,3 +122,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -225,6 +225,20 @@
- #address-cells = <1>;
- #size-cells = <1>;
- };
-+
-+ spi@29000 {
-+ reg = <0x00029000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ spi_nor: spi-nor@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <20000000>;
-+ linux,part-probe = "ofpart", "bcm47xxpart";
-+ status = "disabled";
-+ };
-+ };
- };
-
- lcpll0: lcpll0@1800c100 {
diff --git a/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch b/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch
deleted file mode 100644
index f15cfb79c4..0000000000
--- a/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 5f79985dcfec73d7a09ed99c40c28b64552518fe Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 27 Apr 2016 09:05:03 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and
-NOR flash") enabled SPI-NOR device on routers using serial flash only.
-However there are also devices with two flash memories:
-1) Small SPI attached flash used mostly for booting
-2) Bigger NAND used mostly for storing firmware
-On such devices we still need SPI-NOR e.g. to access NVRAM data.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++
- 5 files changed, 20 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -147,3 +147,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -90,3 +90,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -82,3 +82,7 @@
- };
- };
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -131,3 +131,7 @@
- &usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -113,3 +113,7 @@
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch b/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch
deleted file mode 100644
index 0210f7e2aa..0000000000
--- a/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 59f0ce1a3ebb9288fc8c1400aa503e923621161e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 23 May 2016 16:38:00 -0700
-Subject: [PATCH 1/3] ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
-
-Add the Switch Register Access Block which is a special piece of
-hardware allowing us to perform indirect read/writes towards the
-integrated BCM5301X Ethernet switch.
-
-We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi
-bus node to get proper binding between the BCMA instantiated core and
-the Device Tree nodes. We will need that to be able to reference
-Ethernet Device Tree nodes in a future patch adding the switch ports
-layout.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -239,6 +239,22 @@
- status = "disabled";
- };
- };
-+
-+ gmac0: ethernet@24000 {
-+ reg = <0x24000 0x800>;
-+ };
-+
-+ gmac1: ethernet@25000 {
-+ reg = <0x25000 0x800>;
-+ };
-+
-+ gmac2: ethernet@26000 {
-+ reg = <0x26000 0x800>;
-+ };
-+
-+ gmac3: ethernet@27000 {
-+ reg = <0x27000 0x800>;
-+ };
- };
-
- lcpll0: lcpll0@1800c100 {
-@@ -260,6 +276,17 @@
- "sata2";
- };
-
-+ srab: srab@18007000 {
-+ compatible = "brcm,bcm5301x-srab";
-+ reg = <0x18007000 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ status = "disabled";
-+
-+ /* ports are defined in board DTS */
-+ };
-+
- nand: nand@18028000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch b/target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch
deleted file mode 100644
index 95375fc338..0000000000
--- a/target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 2cd0c0202f138fa95b3fbb027e87b191ad0b1884 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 24 May 2016 11:41:58 -0700
-Subject: [PATCH 2/3] ARM: dts: BCM5301X: Add SRAB interrupts
-
-Add interrupt mapping for the Switch Register Access Block. Only 12
-interrupts are usable at the moment even though up to 32 are dedicated
-to the SRAB.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -153,6 +153,21 @@
- /* ChipCommon */
- <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-
-+ /* Switch Register Access Block */
-+ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-+
- /* PCIe Controller 0 */
- <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
- <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch b/target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch
deleted file mode 100644
index 7ddb99bb33..0000000000
--- a/target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 2df1808dc0e2b5358e13beb95192b15200017776 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Wed, 25 May 2016 16:55:35 -0700
-Subject: [PATCH 3/3] ARM: dts: BCM5310x: Enable switch ports on SmartRG
- SR400AC
-
-Define the port mapping for the SmartRG SR400ACE device.
-
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 40 +++++++++++++++++++++++++++
- 1 file changed, 40 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -126,3 +126,43 @@
- &spi_nor {
- status = "okay";
- };
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "lan4";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan3";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan2";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan1";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "wan";
-+ };
-+
-+ port@5 {
-+ reg = <5>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/039-ARM-dts-BCM5301x-Add-RNG-Device-Tree-node.patch b/target/linux/bcm53xx/patches-4.4/039-ARM-dts-BCM5301x-Add-RNG-Device-Tree-node.patch
deleted file mode 100644
index 9b18ac6886..0000000000
--- a/target/linux/bcm53xx/patches-4.4/039-ARM-dts-BCM5301x-Add-RNG-Device-Tree-node.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 36e55669ebdef9eaf3f4ab4e82a07bb4b95a4813 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Wed, 22 Jun 2016 17:27:03 -0700
-Subject: [PATCH] ARM: dts: BCM5301x: Add RNG Device Tree node
-
-Add the DT node for the random number generator peripheral.
-
-Acked-by: Scott Branden <scott.branden@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -302,6 +302,11 @@
- /* ports are defined in board DTS */
- };
-
-+ rng: rng@18004000 {
-+ compatible = "brcm,bcm5301x-rng";
-+ reg = <0x18004000 0x14>;
-+ };
-+
- nand: nand@18028000 {
- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
diff --git a/target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch b/target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch
deleted file mode 100644
index dd24e2624d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/040-ARM-dts-BCM5301x-Add-BCM953012ER-board.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From f8c331bda6a90b239f600020eec1b0defe7249b5 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Wed, 22 Jun 2016 17:00:35 -0700
-Subject: [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
-
-Add support for the Broadcom BCM953012 Enterprise Router reference
-board, enable the following peripherals:
-
-- UART0 (UART1 is not populated)
-- WPS and restart GPIO buttons
-- Ethernet switch w/ only two facing ports
-- NAND flash
-- SPI-NOR flash
-
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++
- 2 files changed, 105 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm953012er.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47094-dlink-dir-885l.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
-+ bcm953012er.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -0,0 +1,104 @@
-+/*
-+ * BSD LICENSE
-+ *
-+ * Copyright(c) 2016 Broadcom. All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom Corporation nor the names of its
-+ * contributors may be used to endorse or promote products derived
-+ * from this software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ model = "NorthStar Enterprise Router (BCM953012ER)";
-+ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x8000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
-+
-+&srab {
-+ status = "okay";
-+
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "port0";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "port1";
-+ };
-+
-+ port@5 {
-+ reg = <5>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/041-0001-ARM-BCM5301X-Specify-NAND-chip-select-and-ECC-in-sep.patch b/target/linux/bcm53xx/patches-4.4/041-0001-ARM-BCM5301X-Specify-NAND-chip-select-and-ECC-in-sep.patch
deleted file mode 100644
index 77a90c3fcd..0000000000
--- a/target/linux/bcm53xx/patches-4.4/041-0001-ARM-BCM5301X-Specify-NAND-chip-select-and-ECC-in-sep.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 8ab5f1fbd39c29125403678a0caf0a71046da361 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 6 Jun 2016 09:43:49 +0200
-Subject: [PATCH 1/2] ARM: BCM5301X: Specify NAND chip select and ECC in
- separated files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Using separated file with common chip select parameters will allow us
-adding other ECC setups without code duplication.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi | 16 +++++-----------
- arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi | 18 ++++++++++++++++++
- 2 files changed, 23 insertions(+), 11 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
-@@ -9,16 +9,10 @@
- * Licensed under the GNU/GPL. See COPYING for details.
- */
-
--/ {
-- nand@18028000 {
-- nandcs@0 {
-- compatible = "brcm,nandcs";
-- reg = <0>;
-- #address-cells = <1>;
-- #size-cells = <1>;
-+#include "bcm5301x-nand-cs0.dtsi"
-
-- nand-ecc-strength = <8>;
-- nand-ecc-step-size = <512>;
-- };
-- };
-+&nandcs {
-+ nand-ecc-algo = "bch";
-+ nand-ecc-strength = <8>;
-+ nand-ecc-step-size = <512>;
- };
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -0,0 +1,18 @@
-+/*
-+ * Broadcom Northstar NAND.
-+ *
-+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/ {
-+ nand@18028000 {
-+ nandcs: nandcs@0 {
-+ compatible = "brcm,nandcs";
-+ reg = <0>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/041-0002-ARM-BCM5301X-Fix-NAND-ECC-parameters-for-D-Link-DIR-.patch b/target/linux/bcm53xx/patches-4.4/041-0002-ARM-BCM5301X-Fix-NAND-ECC-parameters-for-D-Link-DIR-.patch
deleted file mode 100644
index e27d41485f..0000000000
--- a/target/linux/bcm53xx/patches-4.4/041-0002-ARM-BCM5301X-Fix-NAND-ECC-parameters-for-D-Link-DIR-.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 70a0ae1c33572f012b734d4b574f38136c57f1a0 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 6 Jun 2016 09:43:50 +0200
-Subject: [PATCH 2/2] ARM: BCM5301X: Fix NAND ECC parameters for D-Link
- DIR-885L
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device uses BCH-1 instead of BCH-8. This fixes ECC errors and makes
-NAND usable with brcmnand.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 2 +-
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi | 15 +++++++++++++++
- 2 files changed, 16 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -10,7 +10,7 @@
- /dts-v1/;
-
- #include "bcm4708.dtsi"
--#include "bcm5301x-nand-cs0-bch8.dtsi"
-+#include "bcm5301x-nand-cs0-bch1.dtsi"
-
- / {
- compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
-@@ -0,0 +1,15 @@
-+/*
-+ * Broadcom Northstar NAND.
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm5301x-nand-cs0.dtsi"
-+
-+&nandcs {
-+ nand-ecc-algo = "bch";
-+ nand-ecc-strength = <1>;
-+ nand-ecc-step-size = <512>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/042-ARM-BCM5301X-Specify-PHY-of-USB-2.0-in-DT.patch b/target/linux/bcm53xx/patches-4.4/042-ARM-BCM5301X-Specify-PHY-of-USB-2.0-in-DT.patch
deleted file mode 100644
index e95a513c78..0000000000
--- a/target/linux/bcm53xx/patches-4.4/042-ARM-BCM5301X-Specify-PHY-of-USB-2.0-in-DT.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From 773880f77ae0a6782dd3da176bd25d85ff3a8c7f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 1 Jun 2016 22:07:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Specify PHY of USB 2.0 in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Driver for Northstar USB 2.0 PHY was added in 4.7-rc1 by:
-commit d3feb4067335 ("phy: bcm-ns-usb2: new driver for USB 2.0 PHY on
-Northstar").
-It should be used to let EHCI platform driver init PHY.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -140,6 +140,15 @@
- };
- };
-
-+ usb2_phy: usb2-phy {
-+ compatible = "brcm,ns-usb2-phy";
-+ reg = <0x1800c000 0x1000>;
-+ reg-names = "dmu";
-+ #phy-cells = <0>;
-+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+ clock-names = "phy-ref-clk";
-+ };
-+
- axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
-@@ -232,6 +241,8 @@
-
- #address-cells = <1>;
- #size-cells = <1>;
-+
-+ phys = <&usb2_phy>;
- };
-
- usb3: usb3@23000 {
diff --git a/target/linux/bcm53xx/patches-4.4/043-0001-ARM-BCM53573-Initial-support-for-Broadcom-BCM53573-S.patch b/target/linux/bcm53xx/patches-4.4/043-0001-ARM-BCM53573-Initial-support-for-Broadcom-BCM53573-S.patch
deleted file mode 100644
index 3b687c23bc..0000000000
--- a/target/linux/bcm53xx/patches-4.4/043-0001-ARM-BCM53573-Initial-support-for-Broadcom-BCM53573-S.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 4ebd50472899eb07d5dfc24f2015dce6fe3c5cb8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 21 Aug 2016 19:01:38 +0200
-Subject: [PATCH] ARM: BCM53573: Initial support for Broadcom BCM53573 SoCs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 series is a new family with embedded wireless. By marketing
-people it's sometimes called Northstar but it uses different CPU and has
-different architecture so we need a new symbol for it.
-Fortunately it shares some peripherals with other iProc based SoCs so we
-will be able to reuse some drivers/bindings.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- MAINTAINERS | 7 +++++++
- arch/arm/mach-bcm/Kconfig | 14 ++++++++++++++
- 2 files changed, 21 insertions(+)
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -2338,6 +2338,13 @@ F: arch/arm/mach-bcm/bcm_5301x.c
- F: arch/arm/boot/dts/bcm5301x.dtsi
- F: arch/arm/boot/dts/bcm470*
-
-+BROADCOM BCM53573 ARM ARCHITECTURE
-+M: Rafał Miłecki <rafal@milecki.pl>
-+L: linux-arm-kernel@lists.infradead.org
-+S: Maintained
-+F: arch/arm/boot/dts/bcm53573*
-+F: arch/arm/boot/dts/bcm47189*
-+
- BROADCOM BCM63XX ARM ARCHITECTURE
- M: Florian Fainelli <f.fainelli@gmail.com>
- L: linux-arm-kernel@lists.infradead.org
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -141,6 +141,20 @@ config ARCH_BCM2835
- This enables support for the Broadcom BCM2835 SoC. This SoC is
- used in the Raspberry Pi and Roku 2 devices.
-
-+config ARCH_BCM_53573
-+ bool "Broadcom BCM53573 SoC series support"
-+ depends on ARCH_MULTI_V7
-+ select ARCH_BCM_IPROC
-+ select HAVE_ARM_ARCH_TIMER
-+ help
-+ BCM53573 series is set of SoCs using ARM Cortex-A7 CPUs with wireless
-+ embedded in the chipset.
-+ This SoC line is mostly used in home routers and is some cheaper
-+ alternative for Northstar family.
-+
-+ The base chip is BCM53573 and there are some packaging modifications
-+ like BCM47189 and BCM47452.
-+
- config ARCH_BCM_63XX
- bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
- depends on MMU
diff --git a/target/linux/bcm53xx/patches-4.4/044-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch b/target/linux/bcm53xx/patches-4.4/044-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
deleted file mode 100644
index 954e8f927f..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From b5057e498da8211ac3cc8ff5780034e5da61d077 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 23 Aug 2016 08:40:32 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R8500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8500 is another BCM47094 device, it just has three BCM4366
-wireless chipsets. It's a very standard DT with mostly GPIO devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 104 +++++++++++++++++++++++++++
- 2 files changed, 105 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012er.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -0,0 +1,104 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Netgear R8500";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power0 {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz-1 {
-+ label = "bcm53xx:white:5ghz-1";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz-2 {
-+ label = "bcm53xx:white:5ghz-2";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:white:usb2";
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ brightness {
-+ label = "Backlight";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch b/target/linux/bcm53xx/patches-4.4/044-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch
deleted file mode 100644
index a1c462dfc2..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From 21c29be6a69d3ef4f5a2e16272deb4845f8208ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 23 Aug 2016 07:37:43 +0200
-Subject: [PATCH] ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 seems to be low priced alternative for Northstar chipsts. It
-uses single core Cortex-A7 and doesn't have SDU or local (TWD) timer. It
-was also stripped out of independent SPI controller and 2 GMACs.
-
-DTS for Tenda AC9 isn't completed yet. It misses e.g. switch entry (we
-still need some b53 fixes) and probably some clocks. It adds support for
-basic features however and can be improved later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 74 ++++++++++++++++
- arch/arm/boot/dts/bcm53573.dtsi | 147 +++++++++++++++++++++++++++++++
- 3 files changed, 223 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-tenda-ac9.dts
- create mode 100644 arch/arm/boot/dts/bcm53573.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -82,6 +82,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm94709.dtb \
- bcm953012er.dtb \
- bcm953012k.dtb
-+dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-tenda-ac9.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -0,0 +1,74 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Tenda AC9";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb {
-+ label = "bcm53xx:blue:usb";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:blue:system";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -0,0 +1,147 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include "skeleton.dtsi"
-+
-+/ {
-+ interrupt-parent = <&gic>;
-+
-+ chosen {
-+ stdout-path = &uart0;
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a7";
-+ reg = <0x0>;
-+ };
-+ };
-+
-+ mpcore {
-+ compatible = "simple-bus";
-+ ranges = <0x00000000 0x18310000 0x00008000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ gic: interrupt-controller@1000 {
-+ compatible = "arm,cortex-a7-gic";
-+ #interrupt-cells = <3>;
-+ #address-cells = <0>;
-+ interrupt-controller;
-+ reg = <0x1000 0x1000>,
-+ <0x2000 0x0100>;
-+ };
-+ };
-+
-+ clocks {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ alp: oscillator {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <40000000>;
-+ };
-+ };
-+
-+ axi@18000000 {
-+ compatible = "brcm,bus-axi";
-+ reg = <0x18000000 0x1000>;
-+ ranges = <0x00000000 0x18000000 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* ChipCommon */
-+ <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* IEEE 802.11 0 */
-+ <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 0 */
-+ <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 2.0 Controller */
-+ <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 0 */
-+ <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* IEEE 802.11 1 */
-+ <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ chipcommon: chipcommon@0 {
-+ compatible = "simple-bus";
-+ reg = <0x00000000 0x1000>;
-+ ranges;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ uart0: serial@0300 {
-+ compatible = "ns16550a";
-+ reg = <0x0300 0x100>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&alp>;
-+ status = "okay";
-+ };
-+ };
-+
-+ usb2: usb2@4000 {
-+ reg = <0x4000 0x1000>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ ehci: ehci@4000 {
-+ compatible = "generic-ehci";
-+ reg = <0x4000 0x1000>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ohci: ohci@d000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ohci";
-+ reg = <0xd000 0x1000>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+ };
-+
-+ gmac0: ethernet@5000 {
-+ reg = <0x5000 0x1000>;
-+ };
-+
-+ gmac1: ethernet@b000 {
-+ reg = <0xb000 0x1000>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch b/target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
deleted file mode 100644
index 43c4574db1..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 345fd105ff676ef672d1e41b31165b47aa040dab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 22:58:32 +0200
-Subject: [PATCH] ARM: BCM5301X: Add separated DTS include file for BCM47094
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use it to store BCM47094 specific properties/values and avoid repeating
-them in device DTS files.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +--
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
- arch/arm/boot/dts/bcm47094.dtsi | 11 +++++++++++
- 3 files changed, 13 insertions(+), 4 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm47094.dtsi
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm47094.dtsi"
- #include "bcm5301x-nand-cs0-bch1.dtsi"
-
- / {
-@@ -107,7 +107,6 @@
-
- &uart0 {
- status = "okay";
-- clock-frequency = <125000000>;
- };
-
- &usb3 {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -6,7 +6,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm47094.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
-@@ -100,5 +100,4 @@
-
- &uart0 {
- status = "okay";
-- clock-frequency = <125000000>;
- };
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -0,0 +1,11 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm4708.dtsi"
-+
-+&uart0 {
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch b/target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
deleted file mode 100644
index 65dc796e0d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 3ede027b3dce2fca07350b7587c7c8f44706c94c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 22:58:33 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable UART on Netgear R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It was tested by LEDE users, all we need is to adjust clock frequency.
-While we're at it create a separated DTS include file to share code with
-other BCM4709 devices easier.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 6 +++++-
- arch/arm/boot/dts/bcm4709.dtsi | 11 +++++++++++
- 5 files changed, 19 insertions(+), 4 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm4709.dtsi
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
-@@ -107,6 +107,10 @@
- };
- };
-
-+&uart0 {
-+ status = "okay";
-+};
-+
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -0,0 +1,11 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm4708.dtsi"
-+
-+&uart0 {
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch b/target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
deleted file mode 100644
index 73bc90e6a1..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 5b92db97f4ae345bd6f045c9427471680a7fe2e7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 22:58:34 +0200
-Subject: [PATCH] ARM: BCM5301X: Specify USB 3.0 PHY in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Driver for Northstar USB 3.0 PHY has been recently added under the name
-phy-bcm-ns-usb3. Add binding for it into the DT files.
-The only slightly tricky part is BCM47094 which uses different PHY
-version and requires different compatible value.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 6 ++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 7 +++++++
- 2 files changed, 13 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -6,6 +6,12 @@
-
- #include "bcm4708.dtsi"
-
-+/ {
-+ usb3_phy: usb3-phy {
-+ compatible = "brcm,ns-bx-usb3-phy";
-+ };
-+};
-+
- &uart0 {
- clock-frequency = <125000000>;
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -149,6 +149,13 @@
- clock-names = "phy-ref-clk";
- };
-
-+ usb3_phy: usb3-phy {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
-+ reg-names = "dmp", "ccb-mii";
-+ #phy-cells = <0>;
-+ };
-+
- axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch b/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
deleted file mode 100644
index 3052bd0f46..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 46daccf62d1651bf8b09978478ca6465a7a81f47 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Tue, 27 Sep 2016 11:27:10 -0600
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510
-
-Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
-chipsets on PCB connected using PCIe.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++++
- 2 files changed, 65 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac56u.dtb \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
-+ bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -0,0 +1,64 @@
-+/*
-+ * Copyright 2016 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-+ model = "Luxul XAP-1510 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch b/target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
deleted file mode 100644
index 3067af84df..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From ef3bc318adeb15b38688df6a583bafea2befce43 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Tue, 27 Sep 2016 11:27:11 -0600
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-3100
-
-Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
-4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
-algorithm.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 ++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
- 3 files changed, 125 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
- create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Copyright 2016 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XWR-3100 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ lan3 {
-+ label = "bcm53xx:green:lan1";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan4 {
-+ label = "bcm53xx:green:lan0";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan1 {
-+ label = "bcm53xx:green:lan3";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan2 {
-+ label = "bcm53xx:green:lan2";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
-@@ -0,0 +1,13 @@
-+/*
-+ * Copyright 2016 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm5301x-nand-cs0.dtsi"
-+
-+&nandcs {
-+ nand-ecc-algo = "bch";
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch b/target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch
deleted file mode 100644
index b6e9c4a862..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 547f23183d9d77b51754689a71e3e58d085ccaec Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 17 Sep 2016 22:13:46 +0200
-Subject: [PATCH] ARM: BCM53573: Specify PMU and its ILP clock in the DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ILP clock (sometimes called a "slow clock") is a part of PMU (Power
-Management Unit). There has been recently added a driver for it, so add
-a proper entry in the DT as well.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -143,5 +143,17 @@
- gmac1: ethernet@b000 {
- reg = <0xb000 0x1000>;
- };
-+
-+ pmu@12000 {
-+ compatible = "simple-mfd", "syscon";
-+ reg = <0x00012000 0x00001000>;
-+
-+ ilp: ilp {
-+ compatible = "brcm,bcm53573-ilp";
-+ clocks = <&alp>;
-+ #clock-cells = <0>;
-+ clock-output-names = "ilp";
-+ };
-+ };
- };
- };
diff --git a/target/linux/bcm53xx/patches-4.4/044-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch b/target/linux/bcm53xx/patches-4.4/044-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch
deleted file mode 100644
index 5b2aa2622a..0000000000
--- a/target/linux/bcm53xx/patches-4.4/044-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From 41182beb217c47cfbaaf26a60f22a8b3943faa61 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 13 Nov 2016 11:12:09 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's BCM4709A0 based device with 16 MiB flash, 128 MiB of RAM and two
-PCIe based on-PCB BCM4360 chipsets.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 114 ++++++++++++++++++++++
- 2 files changed, 115 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
-+ bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -0,0 +1,114 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+
-+/ {
-+ compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "TP-LINK Archer C9 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ lan {
-+ label = "bcm53xx:blue:lan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:blue:usb3";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:blue:usb2";
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-blue {
-+ label = "bcm53xx:blue:wan";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power {
-+ label = "bcm53xx:blue:power";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/045-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch b/target/linux/bcm53xx/patches-4.4/045-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
deleted file mode 100644
index a4f32f5c14..0000000000
--- a/target/linux/bcm53xx/patches-4.4/045-ARM-BCM5301X-Add-back-handler-ignoring-external-impr.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 09f3510fb70a46c8921f2cf4a90dbcae460a6820 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 29 Oct 2016 13:12:29 +0200
-Subject: [PATCH] ARM: BCM5301X: Add back handler ignoring external imprecise
- aborts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Since early BCM5301X days we got abort handler that was removed by
-commit 937b12306ea79 ("ARM: BCM5301X: remove workaround imprecise abort
-fault handler"). It assumed we need to deal only with pending aborts
-left by the bootloader. Unfortunately this isn't true for BCM5301X.
-
-When probing PCI config space (device enumeration) it is expected to
-have master aborts on the PCI bus. Most bridges don't forward (or they
-allow disabling it) these errors onto the AXI/AMBA bus but not the
-Northstar (BCM5301X) one.
-
-iProc PCIe controller on Northstar seems to be some older one, without
-a control register for errors forwarding. It means we need to workaround
-this at platform level. All newer platforms are not affected by this
-issue.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/mach-bcm/bcm_5301x.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -9,14 +9,42 @@
- #include <asm/hardware/cache-l2x0.h>
-
- #include <asm/mach/arch.h>
-+#include <asm/siginfo.h>
-+#include <asm/signal.h>
-+
-+#define FSR_EXTERNAL (1 << 12)
-+#define FSR_READ (0 << 10)
-+#define FSR_IMPRECISE 0x0406
-
- static const char *const bcm5301x_dt_compat[] __initconst = {
- "brcm,bcm4708",
- NULL,
- };
-
-+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
-+ struct pt_regs *regs)
-+{
-+ /*
-+ * We want to ignore aborts forwarded from the PCIe bus that are
-+ * expected and shouldn't really be passed by the PCIe controller.
-+ * The biggest disadvantage is the same FSR code may be reported when
-+ * reading non-existing APB register and we shouldn't ignore that.
-+ */
-+ if (fsr == (FSR_EXTERNAL | FSR_READ | FSR_IMPRECISE))
-+ return 0;
-+
-+ return 1;
-+}
-+
-+static void __init bcm5301x_init_early(void)
-+{
-+ hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
-+ "imprecise external abort");
-+}
-+
- DT_MACHINE_START(BCM5301X, "BCM5301X")
- .l2c_aux_val = 0,
- .l2c_aux_mask = ~0,
- .dt_compat = bcm5301x_dt_compat,
-+ .init_early = bcm5301x_init_early,
- MACHINE_END
diff --git a/target/linux/bcm53xx/patches-4.4/046-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch b/target/linux/bcm53xx/patches-4.4/046-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch
deleted file mode 100644
index cc10d21d71..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-From 2b354a7c56f375ba414b9b9c96f160f5749e5e64 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 1 Dec 2016 18:40:51 +0100
-Subject: [PATCH 1/6] ARM: BCM5301X: Enable UART by default for BCM4708(1),
- BCM4709(4) & BCM53012
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Every device tested so far got UART0 (at 0x18000300) working as serial
-console. It's most likely part of reference design and all vendors use
-it that way.
-
-It seems to be easier to enable it by default and just disable it if we
-ever see a device with different hardware design.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
- arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
- arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
- arch/arm/boot/dts/bcm4709.dtsi | 1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
- arch/arm/boot/dts/bcm47094.dtsi | 1 +
- arch/arm/boot/dts/bcm94708.dts | 4 ----
- arch/arm/boot/dts/bcm94709.dts | 4 ----
- arch/arm/boot/dts/bcm953012er.dts | 4 ----
- arch/arm/boot/dts/bcm953012k.dts | 1 -
- 20 files changed, 10 insertions(+), 61 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -136,10 +136,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -55,10 +55,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -56,10 +56,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -83,10 +83,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -119,10 +119,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -34,3 +34,7 @@
- };
-
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -122,7 +122,3 @@
- };
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -24,3 +24,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -100,7 +100,3 @@
- };
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -107,10 +107,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -97,10 +97,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4709.dtsi
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -8,4 +8,5 @@
-
- &uart0 {
- clock-frequency = <125000000>;
-+ status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -105,10 +105,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -98,10 +98,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -97,7 +97,3 @@
- };
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -14,4 +14,5 @@
-
- &uart0 {
- clock-frequency = <125000000>;
-+ status = "okay";
- };
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -50,7 +50,3 @@
- reg = <0x00000000 0x08000000>;
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -50,7 +50,3 @@
- reg = <0x00000000 0x08000000>;
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -70,10 +70,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -54,7 +54,6 @@
-
- &uart0 {
- clock-frequency = <62499840>;
-- status = "okay";
- };
-
- &uart1 {
diff --git a/target/linux/bcm53xx/patches-4.4/046-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch b/target/linux/bcm53xx/patches-4.4/046-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch
deleted file mode 100644
index 71c1d0cc09..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 24e24f72379638d598aec5d0525ef57d5bfc5c51 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:51 +0100
-Subject: [PATCH 2/6] ARM: BCM5301X: Fix LAN LED labels for Luxul XWR-3100
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-They were named incorrectly most likely due to copy & paste mistake.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -31,13 +31,13 @@
- };
-
- lan3 {
-- label = "bcm53xx:green:lan1";
-+ label = "bcm53xx:green:lan3";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-
- lan4 {
-- label = "bcm53xx:green:lan0";
-+ label = "bcm53xx:green:lan4";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-@@ -49,7 +49,7 @@
- };
-
- lan1 {
-- label = "bcm53xx:green:lan3";
-+ label = "bcm53xx:green:lan1";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
diff --git a/target/linux/bcm53xx/patches-4.4/046-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch b/target/linux/bcm53xx/patches-4.4/046-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch
deleted file mode 100644
index 5ecda17bb5..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 45d2567b4b80a3f267502419aaad3d74b745dae7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:52 +0100
-Subject: [PATCH 3/6] ARM: BCM5301X: Specify USB controllers in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are 3 separated controllers, one per USB /standard/. With PHY
-drivers in place they can be simply supported with generic drivers.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Ray Jui <ray.jui@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -248,8 +248,26 @@
-
- #address-cells = <1>;
- #size-cells = <1>;
-+ ranges;
-
-- phys = <&usb2_phy>;
-+ interrupt-parent = <&gic>;
-+
-+ ehci: ehci@21000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ehci";
-+ reg = <0x00021000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb2_phy>;
-+ };
-+
-+ ohci: ohci@22000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ohci";
-+ reg = <0x00022000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ };
- };
-
- usb3: usb3@23000 {
-@@ -257,6 +275,19 @@
-
- #address-cells = <1>;
- #size-cells = <1>;
-+ ranges;
-+
-+ interrupt-parent = <&gic>;
-+
-+ xhci: xhci@23000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-xhci";
-+ reg = <0x00023000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb3_phy>;
-+ phy-names = "usb";
-+ };
- };
-
- spi@29000 {
diff --git a/target/linux/bcm53xx/patches-4.4/046-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch b/target/linux/bcm53xx/patches-4.4/046-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch
deleted file mode 100644
index 84d0009002..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 1aca202b721ce8643f87a8f85a686595c1be6b60 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:53 +0100
-Subject: [PATCH 4/6] ARM: BCM5301X: Set GPIO enabling USB power on Netgear
- R7000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is one GPIO controlling power for both USB ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -100,3 +100,11 @@
- };
- };
- };
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/046-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch b/target/linux/bcm53xx/patches-4.4/046-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch
deleted file mode 100644
index 05b7abe749..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From 94afd3b99c65072b76edd25f73bad89587b83261 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:54 +0100
-Subject: [PATCH 5/6] ARM: BCM5301X: Specify all RAM by including an extra
- block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The first 128 MiB of RAM can be accessed using an alias at address 0x0.
-
-In theory we could access whole RAM using 0x80000000 - 0xbfffffff range
-(up to 1 GiB) but it doesn't seem to work on Northstar. For some reason
-(hardware setup left by the bootloader maybe?) 0x80000000 - 0x87ffffff
-range can't be used. I reproduced this problem on:
-1) Buffalo WZR-600DHP2 (BCM47081)
-2) Netgear R6250 (BCM4708)
-3) D-Link DIR-885L (BCM47094)
-
-So it seems we're forced to access first 128 MiB using alias at 0x0 and
-the rest using real base address + 128 MiB offset which is 0x88000000.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 3 ++-
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 ++-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 ++-
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 ++-
- 16 files changed, 32 insertions(+), 16 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- spi {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- spi {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- gpio-keys {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- nand: nand@18028000 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -18,7 +18,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -18,7 +18,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- leds {
diff --git a/target/linux/bcm53xx/patches-4.4/046-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch b/target/linux/bcm53xx/patches-4.4/046-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch
deleted file mode 100644
index a39a31f015..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 92c6f000cb3a4280166d812d88cda3011717b548 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:55 +0100
-Subject: [PATCH 6/6] ARM: BCM53573: Specify USB ports of on-SoC controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom OHCI and EHCI controllers always have 2 ports each on the root
-hub. Describe them in DT to allow specifying extra info or referencing
-port nodes.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -124,6 +124,17 @@
- reg = <0x4000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ };
-+
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ };
- };
-
- ohci: ohci@d000 {
-@@ -133,6 +144,17 @@
- reg = <0xd000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port@1 {
-+ reg = <1>;
-+ };
-+
-+ ohci_port2: port@2 {
-+ reg = <2>;
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch b/target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
deleted file mode 100644
index 7debd03af2..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From d3af86018715ebb19f4111f80e545405b208f09b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 14 Jan 2017 00:58:57 +0100
-Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
- R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
-two of them for 5 GHz band. Both seem the same and their firmwares
-report the same set of channels. The problem is due to hardware / board
-design there are extra limitations that should be respected.
-
-First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
-used for U-NII-1. Using them in a different way may result in wireless
-not working or in noticeably reduced performance. Basic version of this
-info was provided by Broadcom employee, then it has been verified by me
-using original vendor firmware (which has limitations hardcoded in UI).
-
-This patch uses recently introduced ieee80211-freq-limit property to
-describe these limitations at DT level.
-
-Referencing PCIe devices in DT required specifying all related bridges.
-Below you can see (a bit complex) PCI tree from R8000 that explains all
-entries that I needed to put in DT.
-
-0000:00:00.0 14e4:8012 Bridge Device
-└─ 0000:01:00.0 14e4:aa52 Network Controller
-
-0001:00:00.0 14e4:8012 Bridge Device
-└─ 0001:01:00.0 10b5:8603 Bridge Device
- ├─ 0001:02:01.0 10b5:8603 Bridge Device
- │ └─ 0001:03:00.0 14e4:aa52 Network Controller
- ├─ 0001:02:02.0 10b5:8603 Bridge Device
- │ └─ 0001:04:00.0 14e4:aa52 Network Controller
- ├─ 0001:02:03.0 000d:0000 0x000000
- ├─ 0001:02:04.0 000d:0000 0x000000
- ├─ 0001:02:05.0 000d:0000 0x000000
- ├─ 0001:02:06.0 000d:0000 0x000000
- ├─ (...)
- ├─ 0001:02:1d.0 000d:0000 0x000000
- ├─ 0001:02:1e.0 000d:0000 0x000000
- └─ 0001:02:1f.0 000d:0000 0x000000
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 8 +++++
- 2 files changed, 56 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -108,6 +108,54 @@
- };
- };
-
-+&pcie0 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ieee80211-freq-limit = <5735000 5835000>;
-+ };
-+ };
-+};
-+
-+&pcie1 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,2,2 {
-+ reg = <0x1000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@1,4,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ieee80211-freq-limit = <5170000 5730000>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -243,6 +243,14 @@
- #gpio-cells = <2>;
- };
-
-+ pcie0: pcie@12000 {
-+ reg = <0x00012000 0x1000>;
-+ };
-+
-+ pcie1: pcie@13000 {
-+ reg = <0x00013000 0x1000>;
-+ };
-+
- usb2: usb2@21000 {
- reg = <0x00021000 0x1000>;
-
diff --git a/target/linux/bcm53xx/patches-4.4/046-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch b/target/linux/bcm53xx/patches-4.4/046-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch
deleted file mode 100644
index 3592f7083a..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From eeacbb3e30f220d5d775c61421f813d4e186a325 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Sat, 14 Jan 2017 19:29:27 -0700
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1410
-
-Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
-serial flash. It has 3 LEDs and just one (reset) button.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 +++++++++++++++++++++++++++
- 2 files changed, 61 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
-+ bcm47081-luxul-xap-1410.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Luxul XAP-1410 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch b/target/linux/bcm53xx/patches-4.4/046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
deleted file mode 100644
index cf6bc2e335..0000000000
--- a/target/linux/bcm53xx/patches-4.4/046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Sat, 14 Jan 2017 19:29:28 -0700
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
-
-Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
-flash (for bootloader and NVRAM) and NAND flash (for firmware).
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
- 2 files changed, 108 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
- bcm47081-luxul-xap-1410.dtb \
-+ bcm47081-luxul-xwr-1200.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -0,0 +1,107 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Luxul XWR-1200 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ lan3 {
-+ label = "bcm53xx:green:lan3";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ lan4 {
-+ label = "bcm53xx:green:lan4";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ lan2 {
-+ label = "bcm53xx:green:lan2";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ usb {
-+ label = "bcm53xx:green:usb";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ lan1 {
-+ label = "bcm53xx:green:lan1";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/047-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-4.4/047-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
deleted file mode 100644
index ca2b7387c0..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602
-chipsets. LEDs will be hopefully added later to the DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 42 ++++++++++++++++++++++++++++
- 2 files changed, 43 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -77,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-luxul-xwr-1200.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
-+ bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Linksys EA9200";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/047-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.4/047-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
deleted file mode 100644
index 93bf80c29b..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
-wireless chipsets. LEDs will be hopefully added later to the DT.
-According to some sources it may use the same board as EA6400 and just
-differ by an original vendor firmware.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac56u.dtb \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
-+ bcm4708-linksys-ea6300-v1.dtb \
- bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -0,0 +1,41 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,ea6300-v1", "brcm,bcm4708";
-+ model = "Linksys EA6300 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/047-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch b/target/linux/bcm53xx/patches-4.4/047-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch
deleted file mode 100644
index 655548e85a..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3344d946ff277425052383e0a7877baf39911046 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jon.mason@broadcom.com>
-Date: Wed, 8 Feb 2017 15:45:15 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add NAND entries to bcm953012k
-
-Add the NAND entry in the DTS for the bcm953012k reference board.
-
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm953012k.dts | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -52,6 +52,38 @@
- };
- };
-
-+&nand {
-+ nandcs@0 {
-+ compatible = "brcm,nandcs";
-+ reg = <0>;
-+ nand-on-flash-bbt;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+
-+ partition@0 {
-+ label = "nboot";
-+ reg = <0x00000000 0x00200000>;
-+ read-only;
-+ };
-+ partition@200000 {
-+ label = "nenv";
-+ reg = <0x00200000 0x00400000>;
-+ };
-+ partition@600000 {
-+ label = "nsystem";
-+ reg = <0x00600000 0x00a00000>;
-+ };
-+ partition@1000000 {
-+ label = "nrootfs";
-+ reg = <0x01000000 0x07000000>;
-+ };
-+ };
-+};
-+
- &uart0 {
- clock-frequency = <62499840>;
- };
diff --git a/target/linux/bcm53xx/patches-4.4/047-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch b/target/linux/bcm53xx/patches-4.4/047-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch
deleted file mode 100644
index f288a667b7..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 3dc9eca8ece2934047f1d5c290fd36c0e8698756 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 23 Feb 2017 14:06:36 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's tri-band wireless home router based on BCM47094 AKA BCM4709C0. It
-uses 3 x BCM4366 chipsets for wireless.
-Panamera seems to be board name used by Linksys.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 36 +++++++++++++++++++++++++
- 2 files changed, 37 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-linksys-panamera.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -0,0 +1,36 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Linksys EA9500";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/047-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch b/target/linux/bcm53xx/patches-4.4/047-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch
deleted file mode 100644
index 76bfc598bd..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 475dcdec8cd1bb1b73ddfd9f872822bf4ad9c242 Mon Sep 17 00:00:00 2001
-From: Steve Lin <steven.lin1@broadcom.com>
-Date: Thu, 23 Feb 2017 14:23:03 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add support for BCM953012HR
-
-Initial version of DTS to support Broadcom BCM953012HR Northstar
-HR platform, similar to, but not the same as existing 953012K.
-
-Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm953012hr.dts | 99 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 100 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm953012hr.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -89,6 +89,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012er.dtb \
-+ bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -0,0 +1,99 @@
-+/*
-+ * SPDX-License-Identifier: BSD-3-Clause
-+ *
-+ * Copyright(c) 2017 Broadcom
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom nor the names of its contributors
-+ * may be used to endorse or promote products derived from this
-+ * software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ model = "NorthStar HR (BCM953012HR)";
-+ compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory@80000000 {
-+ reg = <0x80000000 0x10000000>;
-+ };
-+};
-+
-+&nandcs {
-+ partition@0 {
-+ label = "nboot";
-+ reg = <0x00000000 0x00200000>;
-+ read-only;
-+ };
-+ partition@200000 {
-+ label = "nenv";
-+ reg = <0x00200000 0x00400000>;
-+ };
-+ partition@600000 {
-+ label = "nsystem";
-+ reg = <0x00600000 0x00a00000>;
-+ };
-+ partition@1000000 {
-+ label = "nrootfs";
-+ reg = <0x01000000 0x07000000>;
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+ spi-max-frequency = <62500000>;
-+ m25p,default-addr-width = <3>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "boot";
-+ reg = <0x00000000 0x000d0000>;
-+ };
-+ partition@d000 {
-+ label = "env";
-+ reg = <0x000d0000 0x00030000>;
-+ };
-+ partition@100000 {
-+ label = "system";
-+ reg = <0x00100000 0x00600000>;
-+ };
-+ partition@700000 {
-+ label = "rootfs";
-+ reg = <0x00700000 0x00900000>;
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/047-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch b/target/linux/bcm53xx/patches-4.4/047-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch
deleted file mode 100644
index 8aa28a744f..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 3ba1bae984e585f500b8406b1bf3e42e0ec752b7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 14 Feb 2017 17:49:05 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Describe Tenda AC9 PCIe card in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Tenda AC9 has PCIe controller with just one device connected to it:
-0000:00:00.0 14e4:d145 Bridge Device
-└─ 0000:01:00.0 14e4:a8db Network Controller
-
-This card is directly on SoC (doesn't use physical connector) and has
-BCM43217 chipset with bcma bus. One of its components is ChipCommon core
-which is also a GPIO controller. We need to describe it to be able to
-add devices using its GPIO pins.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 27 +++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
- 2 files changed, 31 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -72,3 +72,30 @@
- };
- };
- };
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pcie0_chipcommon: chipcommon@0 {
-+ reg = <0 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -113,6 +113,10 @@
- };
- };
-
-+ pcie0: pcie@2000 {
-+ reg = <0x00002000 0x1000>;
-+ };
-+
- usb2: usb2@4000 {
- reg = <0x4000 0x1000>;
- ranges;
diff --git a/target/linux/bcm53xx/patches-4.4/047-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch b/target/linux/bcm53xx/patches-4.4/047-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch
deleted file mode 100644
index 9de64021d1..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 86cd47e761c773f2384ac2041730d7ccfeb40095 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 14 Feb 2017 17:49:06 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's connected to a GPIO pin of an extra controller placed on the PCIe
-card.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -48,6 +48,16 @@
- };
- };
-
-+ pcie0_leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-4.4/047-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch b/target/linux/bcm53xx/patches-4.4/047-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch
deleted file mode 100644
index cbfaf32f60..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch
+++ /dev/null
@@ -1,265 +0,0 @@
-From 153580bd3e242c204bb8b1946d76da78e826f555 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 28 Jan 2017 12:51:35 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's preferred to have DT source files licensed under BSD compatible
-license. All new BCM5301X DTS files use ISC so let's also relicense old
-ones to it.
-
-Except for me only Hauke was ever touched these files in his commit
-9faa5960eef3 ("ARM: BCM5301X: add NAND flash chip description") and
-commit bb1d8fba1965 ("ARM: BCM5301X: add NAND flash chip description for
-Asus RT-AC87U").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081.dtsi | 12 +++++++++++-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++++-
- 11 files changed, 121 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -4,7 +4,17 @@
- *
- * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- #include "bcm5301x.dtsi"
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
diff --git a/target/linux/bcm53xx/patches-4.4/047-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch b/target/linux/bcm53xx/patches-4.4/047-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch
deleted file mode 100644
index 05de689061..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 4a5782a889cfbc8523d7097c3f147572ed5129a6 Mon Sep 17 00:00:00 2001
-From: Aditya Xavier <adityaxavier@gmail.com>
-Date: Sat, 28 Jan 2017 20:07:49 +0530
-Subject: [PATCH] ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Added two WAN status LEDs and a GPIO key for brightness which were
-missing.
-
-Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
- 1 file changed, 20 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -38,18 +38,30 @@
- leds {
- compatible = "gpio-leds";
-
-- power0 {
-+ power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- power1 {
-+ power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
- 5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-@@ -115,6 +127,12 @@
- linux,code = <KEY_RESTART>;
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- };
-+
-+ brightness {
-+ label = "Backlight";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch
deleted file mode 100644
index ce74ff3e4c..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 820a3e952b266d4355e89ed91c9b11945030321e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 8 Mar 2017 07:41:04 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED
- trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such a trigger doesn't exist in Linux and is not needed as LED is being
-turned off by default. This could cause errors in LEDs core code when
-trying to set default trigger.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -26,19 +26,16 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- system {
-@@ -54,7 +51,6 @@
- 2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch
deleted file mode 100644
index cecae0bb7b..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch
+++ /dev/null
@@ -1,651 +0,0 @@
-From 0b660259e927177dc0c6eb3b1c39f23c6a011c5f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 8 Mar 2017 07:41:05 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED
- trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such a trigger doesn't exist in Linux and is not needed as LED is being
-turned off by default. This could cause errors in LEDs core code when
-trying to set default trigger.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 -----
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 --
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 -----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ---
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ---
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ----------
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 --
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 --
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 --------
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 -------
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 ---------
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 --------
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 --------
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------
- 16 files changed, 88 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -41,19 +41,16 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power {
-@@ -71,14 +68,12 @@
- 2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
-
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -41,7 +41,6 @@
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power {
-@@ -59,7 +58,6 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -52,13 +52,11 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power0 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power1 {
-@@ -76,7 +74,6 @@
- router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
-@@ -88,13 +85,11 @@
- wireless0 {
- label = "bcm53xx:blue:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -43,19 +43,16 @@
- power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:blue:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -47,7 +47,6 @@
- power0 {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power1 {
-@@ -59,13 +58,11 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:blue:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -37,61 +37,51 @@
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3-green {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- status-red {
- label = "bcm53xx:red:status";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- status-green {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- status-blue {
- label = "bcm53xx:blue:status";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-red {
- label = "bcm53xx:red:wan";
- gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -47,7 +47,6 @@
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
-@@ -65,7 +64,6 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -68,7 +68,6 @@
- power1 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- router0 {
-@@ -80,7 +79,6 @@
- router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
-@@ -92,13 +90,11 @@
- wireless0 {
- label = "bcm53xx:green:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -41,7 +41,6 @@
- wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power {
-@@ -53,7 +52,6 @@
- wan {
- label = "bcm53xx:red:wan";
- gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -31,13 +31,11 @@
- usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power-white {
-@@ -49,37 +47,31 @@
- router-amber {
- label = "bcm53xx:amber:router";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- router-white {
- label = "bcm53xx:white:router";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless-amber {
- label = "bcm53xx:amber:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless-white {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -47,43 +47,36 @@
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -47,7 +47,6 @@
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan-white {
-@@ -59,49 +58,41 @@
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-2 {
- label = "bcm53xx:white:5ghz-2";
- gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -26,49 +26,41 @@
- lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-blue {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -56,37 +56,31 @@
- wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -34,37 +34,31 @@
- lan3 {
- label = "bcm53xx:green:lan3";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan4 {
- label = "bcm53xx:green:lan4";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
- label = "bcm53xx:green:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan1 {
- label = "bcm53xx:green:lan1";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan2 {
- label = "bcm53xx:green:lan2";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- status {
-@@ -76,13 +70,11 @@
- 2ghz {
- label = "bcm53xx:green:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:green:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -34,37 +34,31 @@
- power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-2 {
- label = "bcm53xx:white:5ghz-2";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch b/target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch
deleted file mode 100644
index b112cba682..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From f22c635e585471d01a38b829c0753c1467b5058e Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Mon, 6 Mar 2017 11:24:44 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add TWD WD Support to DT
-
-Add support for the ARM TWD Watchdog to the bcm5301x device tree. The
-ARM TWD timer allocated the register space for the WDT, so this patch
-necessitated shrinking that. Also, the GIC masks were added for these.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 15 ++++++++++++---
- 1 file changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -70,10 +70,19 @@
- clocks = <&periph_clk>;
- };
-
-- local-timer@20600 {
-+ timer@20600 {
- compatible = "arm,cortex-a9-twd-timer";
-- reg = <0x20600 0x100>;
-- interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-+ reg = <0x20600 0x20>;
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ watchdog@20620 {
-+ compatible = "arm,cortex-a9-twd-wdt";
-+ reg = <0x20620 0x20>;
-+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
- clocks = <&periph_clk>;
- };
-
diff --git a/target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch b/target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch
deleted file mode 100644
index d233e06817..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From bb097e3e00457bd69ad3a767f6b99424e2e06411 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Mon, 6 Mar 2017 11:24:45 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add I2C support to the DT
-
-Add I2C support to the bcm5301x Device Tree. Since no driver changes
-are needed to enable this hardware, only the device tree changes are
-required to make this functional.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -338,6 +338,16 @@
- };
- };
-
-+ i2c0: i2c@18009000 {
-+ compatible = "brcm,iproc-i2c";
-+ reg = <0x18009000 0x50>;
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ clock-frequency = <100000>;
-+ status = "disabled";
-+ };
-+
- lcpll0: lcpll0@1800c100 {
- #clock-cells = <1>;
- compatible = "brcm,nsp-lcpll0";
diff --git a/target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch b/target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch
deleted file mode 100644
index db8fdb525d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From d6661da842bbeec2082b7263c9e682792e7951a9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 14 Mar 2017 11:39:41 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
-chipsets.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 98 ++++++++++++++++++++++
- 2 files changed, 99 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-buffalo-wzr-900dhp.dtb \
- bcm47081-luxul-xap-1410.dtb \
- bcm47081-luxul-xwr-1200.dtb \
-+ bcm47081-tplink-archer-c5-v2.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -0,0 +1,98 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "TP-LINK Archer C5 V2";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ lan {
-+ label = "bcm53xx:green:lan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2-port1 {
-+ label = "bcm53xx:green:usb2-port1";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-green {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "bcm53xx:green:wps";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2-port2 {
-+ label = "bcm53xx:green:usb2-port2";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch b/target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch
deleted file mode 100644
index 781af7a527..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a7996761d1dacbac10c892c16faa90dfe46affcd Mon Sep 17 00:00:00 2001
-From: Steve Lin <steven.lin1@broadcom.com>
-Date: Wed, 15 Mar 2017 16:59:35 -0400
-Subject: [PATCH] ARM: dts: BCM953012HR: Add ethernet aliases
-
-Adding ethernet aliases. These are used, for example, by bootloaders,
-to modify the MAC addresses in the device tree.
-
-Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm953012hr.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm/boot/dts/bcm953012hr.dts
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -41,6 +41,9 @@
-
- aliases {
- serial0 = &uart0;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
-+ ethernet2 = &gmac2;
- };
-
- chosen {
diff --git a/target/linux/bcm53xx/patches-4.4/047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch b/target/linux/bcm53xx/patches-4.4/047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch
deleted file mode 100644
index d174adc0b8..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From 5be82d0475941dc96eeeee3c754baf48365f7bf5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 15 Mar 2017 18:03:27 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Specify serial console params in dtsi
- files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far every Northstar device we have seen was using the same serial
-console params (115200n8). It probably make the most sense to put it in
-some proper dtsi files instead of repeating over and over for every
-single device. As different boards may use different bootloaders it
-seems the safest idea is to use board specific dtsi files.
-
-Just in case some vendor decides to use different UART (parameters) this
-can be always easily overwritten.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708.dtsi | 8 ++++++++
- arch/arm/boot/dts/bcm47081.dtsi | 8 ++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ----
- arch/arm/boot/dts/bcm94708.dts | 8 --------
- arch/arm/boot/dts/bcm94709.dts | 8 --------
- arch/arm/boot/dts/bcm953012er.dts | 8 --------
- arch/arm/boot/dts/bcm953012hr.dts | 5 -----
- arch/arm/boot/dts/bcm953012k.dts | 4 ----
- 8 files changed, 16 insertions(+), 37 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -12,6 +12,14 @@
- / {
- compatible = "brcm,bcm4708";
-
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -22,6 +22,14 @@
- / {
- compatible = "brcm,bcm47081";
-
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -18,10 +18,6 @@
- / {
- interrupt-parent = <&gic>;
-
-- chosen {
-- stdout-path = &uart0;
-- };
--
- chipcommonA {
- compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -38,14 +38,6 @@
- model = "NorthStar SVK (BCM94708)";
- compatible = "brcm,bcm94708", "brcm,bcm4708";
-
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -38,14 +38,6 @@
- model = "NorthStar SVK (BCM94709)";
- compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
-
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -39,14 +39,6 @@
- model = "NorthStar Enterprise Router (BCM953012ER)";
- compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
-
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x8000000>;
- };
---- a/arch/arm/boot/dts/bcm953012hr.dts
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -40,16 +40,11 @@
- compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
-
- aliases {
-- serial0 = &uart0;
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- ethernet2 = &gmac2;
- };
-
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory@80000000 {
- reg = <0x80000000 0x10000000>;
- };
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -43,10 +43,6 @@
- serial1 = &uart1;
- };
-
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x10000000>;
- };
diff --git a/target/linux/bcm53xx/patches-4.4/047-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch b/target/linux/bcm53xx/patches-4.4/047-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch
deleted file mode 100644
index b2a9a1f6c8..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 3a599e0dbc03ffc51568cf3376633d127451632d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 15 Mar 2017 18:03:28 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Specify serial console parameters
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds baud rate, parity & number of data bits. It's required to get
-serial working correctly.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -13,8 +13,12 @@
- / {
- interrupt-parent = <&gic>;
-
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
- chosen {
-- stdout-path = &uart0;
-+ stdout-path = "serial0:115200n8";
- };
-
- cpus {
diff --git a/target/linux/bcm53xx/patches-4.4/047-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch b/target/linux/bcm53xx/patches-4.4/047-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch
deleted file mode 100644
index 461696e960..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From e55d2c7272ff647efac4aecd895b20ee66e43519 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 14 Apr 2017 23:42:28 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add CPU thermal sensor and zone
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses CPU thermal sensor available on every Northstar chipset to
-monitor temperature. We don't have any cooling or throttling so only a
-critical trip was added.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -363,6 +363,12 @@
- "sata2";
- };
-
-+ thermal: thermal@1800c2c0 {
-+ compatible = "brcm,ns-thermal";
-+ reg = <0x1800c2c0 0x10>;
-+ #thermal-sensor-cells = <0>;
-+ };
-+
- srab: srab@18007000 {
- compatible = "brcm,bcm5301x-srab";
- reg = <0x18007000 0x1000>;
-@@ -390,4 +396,24 @@
-
- brcm,nand-has-wp;
- };
-+
-+ thermal-zones {
-+ cpu_thermal: cpu-thermal {
-+ polling-delay-passive = <0>;
-+ polling-delay = <1000>;
-+ coefficients = <(-556) 418000>;
-+ thermal-sensors = <&thermal>;
-+
-+ trips {
-+ cpu-crit {
-+ temperature = <125000>;
-+ hysteresis = <0>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ };
-+ };
-+ };
- };
diff --git a/target/linux/bcm53xx/patches-4.4/047-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch b/target/linux/bcm53xx/patches-4.4/047-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch
deleted file mode 100644
index 8449a342a2..0000000000
--- a/target/linux/bcm53xx/patches-4.4/047-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From c4b88e77c28fad5151a1a4eac516b947e2d51be5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 19 Apr 2017 23:54:25 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify MDIO bus in the DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar devices have MDIO bus that may contain various PHYs attached.
-A common example is USB 3.0 PHY (that doesn't have an MDIO driver yet).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -334,6 +334,14 @@
- };
- };
-
-+ mdio: mdio@18003000 {
-+ compatible = "brcm,iproc-mdio";
-+ reg = <0x18003000 0x8>;
-+ #size-cells = <1>;
-+ #address-cells = <0>;
-+ status = "disabled";
-+ };
-+
- i2c0: i2c@18009000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x18009000 0x50>;
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
deleted file mode 100644
index 9857dec9bd..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 27 Jun 2017 19:35:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for each controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI
-(with just 1 port). Describe them in the DT. In future this will allow
-to reference them as trigger sources.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -272,6 +272,19 @@
- reg = <0x00021000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
-
- ohci: ohci@22000 {
-@@ -280,6 +293,19 @@
- compatible = "generic-ohci";
- reg = <0x00022000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ohci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
- };
-
-@@ -300,6 +326,14 @@
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb3_phy>;
- phy-names = "usb";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ xhci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
deleted file mode 100644
index c2195b1726..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 Aug 2017 06:40:41 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
-leds: document new trigger-sources property") to specify USB ports. Such an
-information can be used by operating system to setup LEDs behavior.
-
-I updated dts files for 7 devices I own and I was able to test.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 +++
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 ++++++
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 +++++
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +++
- 7 files changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -52,6 +52,10 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>, <&ohci_port2>,
-+ <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- power0 {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -48,6 +48,9 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- wireless {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -42,16 +42,22 @@
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- usb3-green {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- wps {
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -36,6 +36,8 @@
- usb2-port1 {
- label = "bcm53xx:green:usb2-port1";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- power {
-@@ -67,6 +69,8 @@
- usb2-port2 {
- label = "bcm53xx:green:usb2-port2";
- gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -46,11 +46,16 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- wan-blue {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -71,6 +71,9 @@
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- 2ghz {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -59,6 +59,9 @@
- usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- status {
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
deleted file mode 100644
index 69deca161f..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 092ccf0415c720a1e9458a46fe75f77574027a55 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 18 Jul 2017 12:37:37 -0700
-Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board
- support
-
-Adds support for the Broadcom reference board BCM947189ACDMBR which
-features the following:
-
-* 128MB of DRAM
-* External MoCA support through a Broadcom BCM6802 chip
-* 1x external Gigabit PHY through the external BCM6802
-* 1x USB 2.0 port
-* 1x PCIE slot
-* Few configurable buttons and LEDs
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
- 2 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -93,7 +93,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-- bcm47189-tenda-ac9.dtb
-+ bcm47189-tenda-ac9.dtb \
-+ bcm947189acdbmr.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
-@@ -0,0 +1,97 @@
-+/*
-+ * Copyright (C) 2017 Broadcom
-+ * Author: Florian Fainelli <f.fainelli@gmail.com>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Broadcom BCM947189ACDBMR";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ spi {
-+ compatible = "spi-gpio";
-+ num-chipselects = <1>;
-+ gpio-sck = <&chipcommon 21 0>;
-+ gpio-miso = <&chipcommon 22 0>;
-+ gpio-mosi = <&chipcommon 23 0>;
-+ cs-gpios = <&chipcommon 24 0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* External BCM6802 MoCA chip is connected */
-+ };
-+};
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch b/target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
deleted file mode 100644
index 75f1d1772e..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 17 Aug 2017 11:05:14 +0200
-Subject: [PATCH] ARM: BCM53573: Specify ports for USB LED for Tenda AC9
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
-leds: document new trigger-sources property") to specify USB ports. Such an
-information can be used by operating system to setup LEDs behavior.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 ++
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -26,6 +26,8 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- wps {
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -138,10 +138,12 @@
-
- ehci_port1: port@1 {
- reg = <1>;
-+ #trigger-source-cells = <0>;
- };
-
- ehci_port2: port@2 {
- reg = <2>;
-+ #trigger-source-cells = <0>;
- };
- };
-
-@@ -158,10 +160,12 @@
-
- ohci_port1: port@1 {
- reg = <1>;
-+ #trigger-source-cells = <0>;
- };
-
- ohci_port2: port@2 {
- reg = <2>;
-+ #trigger-source-cells = <0>;
- };
- };
- };
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
deleted file mode 100644
index 3148f6c32d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 6 Oct 2017 10:52:35 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
- XWR-1200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This info can be used by operating system to setup LED behavior.
-
-Reported-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -57,7 +57,8 @@
- usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "none";
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- status {
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
deleted file mode 100644
index fbe8f54699..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:22 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
-board design.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
-+ bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XBR-4500 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
deleted file mode 100644
index b5ba1dde18..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:23 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
-board design.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
-+ bcm47094-luxul-abr-4500.dtb \
- bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul ABR-4500 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
deleted file mode 100644
index 407537f3b4..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:59 -0600
-Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
-used for 2.4 GHz.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
- 2 files changed, 88 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-luxul-xap-810.dtb \
- bcm47189-tenda-ac9.dtb \
- bcm947189acdbmr.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -0,0 +1,87 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Luxul XAP-810 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:green:system";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ pcie0_leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pcie0_chipcommon: chipcommon@0 {
-+ reg = <0 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch b/target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
deleted file mode 100644
index 51b3dc7903..0000000000
--- a/target/linux/bcm53xx/patches-4.4/049-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:47:00 -0600
-Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
-chipset used for 2.4 GHz.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
- 2 files changed, 51 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-luxul-xap-1440.dtb \
- bcm47189-luxul-xap-810.dtb \
- bcm47189-tenda-ac9.dtb \
- bcm947189acdbmr.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Luxul XAP-1440 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wlan {
-+ label = "bcm53xx:blue:wlan";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:green:system";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch b/target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch
deleted file mode 100644
index c12cdb1861..0000000000
--- a/target/linux/bcm53xx/patches-4.4/070-0001-phy-bcm-ns-usb2-new-driver-for-USB-2.0-PHY-on-Norths.patch
+++ /dev/null
@@ -1,252 +0,0 @@
-From d3feb406733544dbf0e239ef945a09decdceac88 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 14 Apr 2016 11:37:43 +0200
-Subject: [PATCH] phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar is a family of SoCs used in home routers. They have USB 2.0
-and 3.0 controllers with PHYs that need to be properly initialized.
-This driver provides PHY init support in a generic way and can be bound
-with an EHCI controller driver.
-There are (just a few) registers being defined in bcma header. It's
-because DMU/CRU registers will be also needed in other drivers. We will
-need them e.g. in PCIe controller/PHY driver and at some point probably
-in clock driver for BCM53573 chipset. By using include/linux/bcma/ we
-avoid code duplication.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../devicetree/bindings/phy/bcm-ns-usb2-phy.txt | 21 ++++
- drivers/phy/Kconfig | 9 ++
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-bcm-ns-usb2.c | 137 +++++++++++++++++++++
- include/linux/bcma/bcma.h | 1 +
- include/linux/bcma/bcma_driver_arm_c9.h | 15 +++
- 6 files changed, 184 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
- create mode 100644 drivers/phy/phy-bcm-ns-usb2.c
- create mode 100644 include/linux/bcma/bcma_driver_arm_c9.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.txt
-@@ -0,0 +1,21 @@
-+Driver for Broadcom Northstar USB 2.0 PHY
-+
-+Required properties:
-+- compatible: brcm,ns-usb2-phy
-+- reg: iomem address range of DMU (Device Management Unit)
-+- reg-names: "dmu", the only needed & supported reg right now
-+- clocks: USB PHY reference clock
-+- clock-names: "phy-ref-clk", the only needed & supported clock right now
-+
-+To initialize USB 2.0 PHY driver needs to setup PLL correctly. To do this it
-+requires passing phandle to the USB PHY reference clock.
-+
-+Example:
-+ usb2-phy {
-+ compatible = "brcm,ns-usb2-phy";
-+ reg = <0x1800c000 0x1000>;
-+ reg-names = "dmu";
-+ #phy-cells = <0>;
-+ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
-+ clock-names = "phy-ref-clk";
-+ };
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -15,6 +15,15 @@ config GENERIC_PHY
- phy users can obtain reference to the PHY. All the users of this
- framework should select this config.
-
-+config PHY_BCM_NS_USB2
-+ tristate "Broadcom Northstar USB 2.0 PHY Driver"
-+ depends on ARCH_BCM_IPROC || COMPILE_TEST
-+ depends on HAS_IOMEM && OF
-+ select GENERIC_PHY
-+ help
-+ Enable this to support Broadcom USB 2.0 PHY connected to the USB
-+ controller on Northstar family.
-+
- config PHY_BERLIN_USB
- tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -3,6 +3,7 @@
- #
-
- obj-$(CONFIG_GENERIC_PHY) += phy-core.o
-+obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
- obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
- obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
- obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-bcm-ns-usb2.c
-@@ -0,0 +1,137 @@
-+/*
-+ * Broadcom Northstar USB 2.0 PHY Driver
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/bcma/bcma.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+struct bcm_ns_usb2 {
-+ struct device *dev;
-+ struct clk *ref_clk;
-+ struct phy *phy;
-+ void __iomem *dmu;
-+};
-+
-+static int bcm_ns_usb2_phy_init(struct phy *phy)
-+{
-+ struct bcm_ns_usb2 *usb2 = phy_get_drvdata(phy);
-+ struct device *dev = usb2->dev;
-+ void __iomem *dmu = usb2->dmu;
-+ u32 ref_clk_rate, usb2ctl, usb_pll_ndiv, usb_pll_pdiv;
-+ int err = 0;
-+
-+ err = clk_prepare_enable(usb2->ref_clk);
-+ if (err < 0) {
-+ dev_err(dev, "Failed to prepare ref clock: %d\n", err);
-+ goto err_out;
-+ }
-+
-+ ref_clk_rate = clk_get_rate(usb2->ref_clk);
-+ if (!ref_clk_rate) {
-+ dev_err(dev, "Failed to get ref clock rate\n");
-+ err = -EINVAL;
-+ goto err_clk_off;
-+ }
-+
-+ usb2ctl = readl(dmu + BCMA_DMU_CRU_USB2_CONTROL);
-+
-+ if (usb2ctl & BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK) {
-+ usb_pll_pdiv = usb2ctl;
-+ usb_pll_pdiv &= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK;
-+ usb_pll_pdiv >>= BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT;
-+ } else {
-+ usb_pll_pdiv = 1 << 3;
-+ }
-+
-+ /* Calculate ndiv based on a solid 1920 MHz that is for USB2 PHY */
-+ usb_pll_ndiv = (1920000000 * usb_pll_pdiv) / ref_clk_rate;
-+
-+ /* Unlock DMU PLL settings with some magic value */
-+ writel(0x0000ea68, dmu + BCMA_DMU_CRU_CLKSET_KEY);
-+
-+ /* Write USB 2.0 PLL control setting */
-+ usb2ctl &= ~BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK;
-+ usb2ctl |= usb_pll_ndiv << BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT;
-+ writel(usb2ctl, dmu + BCMA_DMU_CRU_USB2_CONTROL);
-+
-+ /* Lock DMU PLL settings */
-+ writel(0x00000000, dmu + BCMA_DMU_CRU_CLKSET_KEY);
-+
-+err_clk_off:
-+ clk_disable_unprepare(usb2->ref_clk);
-+err_out:
-+ return err;
-+}
-+
-+static const struct phy_ops ops = {
-+ .init = bcm_ns_usb2_phy_init,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int bcm_ns_usb2_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct bcm_ns_usb2 *usb2;
-+ struct resource *res;
-+ struct phy_provider *phy_provider;
-+
-+ usb2 = devm_kzalloc(&pdev->dev, sizeof(*usb2), GFP_KERNEL);
-+ if (!usb2)
-+ return -ENOMEM;
-+ usb2->dev = dev;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmu");
-+ usb2->dmu = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(usb2->dmu)) {
-+ dev_err(dev, "Failed to map DMU regs\n");
-+ return PTR_ERR(usb2->dmu);
-+ }
-+
-+ usb2->ref_clk = devm_clk_get(dev, "phy-ref-clk");
-+ if (IS_ERR(usb2->ref_clk)) {
-+ dev_err(dev, "Clock not defined\n");
-+ return PTR_ERR(usb2->ref_clk);
-+ }
-+
-+ usb2->phy = devm_phy_create(dev, NULL, &ops);
-+ if (IS_ERR(dev))
-+ return PTR_ERR(dev);
-+
-+ phy_set_drvdata(usb2->phy, usb2);
-+ platform_set_drvdata(pdev, usb2);
-+
-+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static const struct of_device_id bcm_ns_usb2_id_table[] = {
-+ { .compatible = "brcm,ns-usb2-phy", },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, bcm_ns_usb2_id_table);
-+
-+static struct platform_driver bcm_ns_usb2_driver = {
-+ .probe = bcm_ns_usb2_probe,
-+ .driver = {
-+ .name = "bcm_ns_usb2",
-+ .of_match_table = bcm_ns_usb2_id_table,
-+ },
-+};
-+module_platform_driver(bcm_ns_usb2_driver);
-+
-+MODULE_LICENSE("GPL v2");
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -4,6 +4,7 @@
- #include <linux/pci.h>
- #include <linux/mod_devicetable.h>
-
-+#include <linux/bcma/bcma_driver_arm_c9.h>
- #include <linux/bcma/bcma_driver_chipcommon.h>
- #include <linux/bcma/bcma_driver_pci.h>
- #include <linux/bcma/bcma_driver_pcie2.h>
---- /dev/null
-+++ b/include/linux/bcma/bcma_driver_arm_c9.h
-@@ -0,0 +1,15 @@
-+#ifndef LINUX_BCMA_DRIVER_ARM_C9_H_
-+#define LINUX_BCMA_DRIVER_ARM_C9_H_
-+
-+/* DMU (Device Management Unit) */
-+#define BCMA_DMU_CRU_USB2_CONTROL 0x0164
-+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_MASK 0x00000FFC
-+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_NDIV_SHIFT 2
-+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_MASK 0x00007000
-+#define BCMA_DMU_CRU_USB2_CONTROL_USB_PLL_PDIV_SHIFT 12
-+#define BCMA_DMU_CRU_CLKSET_KEY 0x0180
-+#define BCMA_DMU_CRU_STRAPS_CTRL 0x02A0
-+#define BCMA_DMU_CRU_STRAPS_CTRL_USB3 0x00000010
-+#define BCMA_DMU_CRU_STRAPS_CTRL_4BYTE 0x00008000
-+
-+#endif /* LINUX_BCMA_DRIVER_ARM_C9_H_ */
diff --git a/target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch b/target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch
deleted file mode 100644
index ae3462f43e..0000000000
--- a/target/linux/bcm53xx/patches-4.4/070-0002-phy-bcm-ns-usb2-checking-the-wrong-variable.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 6c081ff6fd5abd621797570be43d5e3c6acfcd58 Mon Sep 17 00:00:00 2001
-From: Dan Carpenter <dan.carpenter@oracle.com>
-Date: Tue, 10 May 2016 11:01:33 +0300
-Subject: [PATCH] phy: bcm-ns-usb2: checking the wrong variable
-
-We intended to test "usb2->phy" here instead of "dev".
-
-Fixes: d3feb4067335 ('phy: bcm-ns-usb2: new driver for USB 2.0 PHY on Northstar')
-Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/phy-bcm-ns-usb2.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/phy/phy-bcm-ns-usb2.c
-+++ b/drivers/phy/phy-bcm-ns-usb2.c
-@@ -109,8 +109,8 @@ static int bcm_ns_usb2_probe(struct plat
- }
-
- usb2->phy = devm_phy_create(dev, NULL, &ops);
-- if (IS_ERR(dev))
-- return PTR_ERR(dev);
-+ if (IS_ERR(usb2->phy))
-+ return PTR_ERR(usb2->phy);
-
- phy_set_drvdata(usb2->phy, usb2);
- platform_set_drvdata(pdev, usb2);
diff --git a/target/linux/bcm53xx/patches-4.4/071-0001-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch b/target/linux/bcm53xx/patches-4.4/071-0001-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch
deleted file mode 100644
index ad34fc8484..0000000000
--- a/target/linux/bcm53xx/patches-4.4/071-0001-phy-bcm-ns-usb3-new-driver-for-USB-3.0-PHY-on-Norths.patch
+++ /dev/null
@@ -1,361 +0,0 @@
-From b8d7478ecfec51b3430f677da44e662d5ff12444 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 12 Aug 2016 00:28:03 +0200
-Subject: [PATCH] phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar is a family of SoCs used in home routers. They have USB 2.0
-and 3.0 controllers with PHYs that need to be properly initialized.
-This driver provides PHY init support in a generic way and can be bound
-with XHCI controller driver.
-
-There aren't any public datasheets from Broadcom so we can't have nice
-defines for all used bits. It means we just follow Broadcom's
-initialization procedure using their magic values. We were quite lucky
-actually that Broadcom put some comments in their SDK reference code
-explaining what given writes are responsible for.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt | 23 ++
- drivers/phy/Kconfig | 9 +
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-bcm-ns-usb3.c | 274 +++++++++++++++++++++
- 4 files changed, 307 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
- create mode 100644 drivers/phy/phy-bcm-ns-usb3.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
-@@ -0,0 +1,23 @@
-+Driver for Broadcom Northstar USB 3.0 PHY
-+
-+Required properties:
-+
-+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
-+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
-+ MMI.
-+- reg-names: "dmp" and "ccb-mii"
-+
-+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
-+three known series: Ax, Bx and Cx.
-+Known A0: BCM4707 rev 0
-+Known B0: BCM4707 rev 4, BCM53573 rev 2
-+Known B1: BCM4707 rev 6
-+Known C0: BCM47094 rev 0
-+
-+Example:
-+ usb3-phy {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
-+ reg-names = "dmp", "ccb-mii";
-+ #phy-cells = <0>;
-+ };
---- a/drivers/phy/Kconfig
-+++ b/drivers/phy/Kconfig
-@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
- Enable this to support Broadcom USB 2.0 PHY connected to the USB
- controller on Northstar family.
-
-+config PHY_BCM_NS_USB3
-+ tristate "Broadcom Northstar USB 3.0 PHY Driver"
-+ depends on ARCH_BCM_IPROC || COMPILE_TEST
-+ depends on HAS_IOMEM && OF
-+ select GENERIC_PHY
-+ help
-+ Enable this to support Broadcom USB 3.0 PHY connected to the USB
-+ controller on Northstar family.
-+
- config PHY_BERLIN_USB
- tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
---- a/drivers/phy/Makefile
-+++ b/drivers/phy/Makefile
-@@ -4,6 +4,7 @@
-
- obj-$(CONFIG_GENERIC_PHY) += phy-core.o
- obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
-+obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
- obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
- obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
- obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
---- /dev/null
-+++ b/drivers/phy/phy-bcm-ns-usb3.c
-@@ -0,0 +1,274 @@
-+/*
-+ * Broadcom Northstar USB 3.0 PHY Driver
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * All magic values used for initialization (and related comments) were obtained
-+ * from Broadcom's SDK:
-+ * Copyright (c) Broadcom Corp, 2012
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/bcma/bcma.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+#include <linux/phy/phy.h>
-+#include <linux/slab.h>
-+
-+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
-+
-+enum bcm_ns_family {
-+ BCM_NS_UNKNOWN,
-+ BCM_NS_AX,
-+ BCM_NS_BX,
-+};
-+
-+struct bcm_ns_usb3 {
-+ struct device *dev;
-+ enum bcm_ns_family family;
-+ void __iomem *dmp;
-+ void __iomem *ccb_mii;
-+ struct phy *phy;
-+};
-+
-+static const struct of_device_id bcm_ns_usb3_id_table[] = {
-+ {
-+ .compatible = "brcm,ns-ax-usb3-phy",
-+ .data = (int *)BCM_NS_AX,
-+ },
-+ {
-+ .compatible = "brcm,ns-bx-usb3-phy",
-+ .data = (int *)BCM_NS_BX,
-+ },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
-+
-+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
-+ u32 mask, u32 value, unsigned long timeout)
-+{
-+ unsigned long deadline = jiffies + timeout;
-+ u32 val;
-+
-+ do {
-+ val = readl(addr);
-+ if ((val & mask) == value)
-+ return 0;
-+ cpu_relax();
-+ udelay(10);
-+ } while (!time_after_eq(jiffies, deadline));
-+
-+ dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
-+
-+ return -EBUSY;
-+}
-+
-+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
-+{
-+ return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
-+ 0x0100, 0x0000,
-+ usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
-+}
-+
-+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
-+{
-+ int err;
-+
-+ err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
-+ if (err < 0) {
-+ dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
-+ return err;
-+ }
-+
-+ writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-+
-+ return 0;
-+}
-+
-+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
-+{
-+ int err;
-+
-+ /* Enable MDIO. Setting MDCDIV as 26 */
-+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
-+
-+ /* Wait for MDIO? */
-+ udelay(2);
-+
-+ /* USB3 PLL Block */
-+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
-+ if (err < 0)
-+ return err;
-+
-+ /* Assert Ana_Pllseq start */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
-+
-+ /* Assert CML Divider ratio to 26 */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
-+
-+ /* Asserting PLL Reset */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
-+
-+ /* Deaaserting PLL Reset */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
-+
-+ /* Deasserting USB3 system reset */
-+ writel(0, usb3->dmp + BCMA_RESET_CTL);
-+
-+ /* PLL frequency monitor enable */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
-+
-+ /* PIPE Block */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
-+
-+ /* CMPMAX & CMPMINTH setting */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
-+
-+ /* DEGLITCH MIN & MAX setting */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
-+
-+ /* TXPMD block */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
-+
-+ /* Enabling SSC */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
-+
-+ return 0;
-+}
-+
-+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
-+{
-+ int err;
-+
-+ /* Enable MDIO. Setting MDCDIV as 26 */
-+ writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
-+
-+ /* Wait for MDIO? */
-+ udelay(2);
-+
-+ /* PLL30 block */
-+ err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
-+ if (err < 0)
-+ return err;
-+
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
-+
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
-+
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
-+
-+ /* Enable SSC */
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
-+
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
-+
-+ bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
-+
-+ /* Waiting MII Mgt interface idle */
-+ bcm_ns_usb3_mii_mng_wait_idle(usb3);
-+
-+ /* Deasserting USB3 system reset */
-+ writel(0, usb3->dmp + BCMA_RESET_CTL);
-+
-+ return 0;
-+}
-+
-+static int bcm_ns_usb3_phy_init(struct phy *phy)
-+{
-+ struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
-+ int err;
-+
-+ /* Perform USB3 system soft reset */
-+ writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
-+
-+ switch (usb3->family) {
-+ case BCM_NS_AX:
-+ err = bcm_ns_usb3_phy_init_ns_ax(usb3);
-+ break;
-+ case BCM_NS_BX:
-+ err = bcm_ns_usb3_phy_init_ns_bx(usb3);
-+ break;
-+ default:
-+ WARN_ON(1);
-+ err = -ENOTSUPP;
-+ }
-+
-+ return err;
-+}
-+
-+static const struct phy_ops ops = {
-+ .init = bcm_ns_usb3_phy_init,
-+ .owner = THIS_MODULE,
-+};
-+
-+static int bcm_ns_usb3_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct of_device_id *of_id;
-+ struct bcm_ns_usb3 *usb3;
-+ struct resource *res;
-+ struct phy_provider *phy_provider;
-+
-+ usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
-+ if (!usb3)
-+ return -ENOMEM;
-+
-+ usb3->dev = dev;
-+
-+ of_id = of_match_device(bcm_ns_usb3_id_table, dev);
-+ if (!of_id)
-+ return -EINVAL;
-+ usb3->family = (enum bcm_ns_family)of_id->data;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
-+ usb3->dmp = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(usb3->dmp)) {
-+ dev_err(dev, "Failed to map DMP regs\n");
-+ return PTR_ERR(usb3->dmp);
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
-+ usb3->ccb_mii = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(usb3->ccb_mii)) {
-+ dev_err(dev, "Failed to map ChipCommon B MII regs\n");
-+ return PTR_ERR(usb3->ccb_mii);
-+ }
-+
-+ usb3->phy = devm_phy_create(dev, NULL, &ops);
-+ if (IS_ERR(usb3->phy)) {
-+ dev_err(dev, "Failed to create PHY\n");
-+ return PTR_ERR(usb3->phy);
-+ }
-+
-+ phy_set_drvdata(usb3->phy, usb3);
-+ platform_set_drvdata(pdev, usb3);
-+
-+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-+ if (!IS_ERR(phy_provider))
-+ dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static struct platform_driver bcm_ns_usb3_driver = {
-+ .probe = bcm_ns_usb3_probe,
-+ .driver = {
-+ .name = "bcm_ns_usb3",
-+ .of_match_table = bcm_ns_usb3_id_table,
-+ },
-+};
-+module_platform_driver(bcm_ns_usb3_driver);
-+
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/bcm53xx/patches-4.4/071-0002-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch b/target/linux/bcm53xx/patches-4.4/071-0002-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch
deleted file mode 100644
index ddbec25863..0000000000
--- a/target/linux/bcm53xx/patches-4.4/071-0002-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From fff3364a637796611c06f59a6f2be61685d99bfe Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 2 Apr 2017 18:55:22 +0200
-Subject: [PATCH] phy: bcm-ns-usb3: split all writes into reg & val pairs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far all the PHY initialization was implemented using some totally
-magic values. There was some pattern there but it wasn't clear what is
-it about.
-
-Thanks to the patch submitted by Broadcom:
-[PATCH 5/6] phy: Add USB3 PHY support for Broadcom NSP SoC
-and the upstream "iproc-mdio" driver we now know there is a MDIO bus
-underneath with PHY(s) and their registers.
-
-It allows us to clean the driver a bit by making all these values less
-magical. The next step is switching to using a proper MDIO layer.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/phy-bcm-ns-usb3.c | 69 ++++++++++++++++++++++++++++++-------------
- 1 file changed, 49 insertions(+), 20 deletions(-)
-
---- a/drivers/phy/phy-bcm-ns-usb3.c
-+++ b/drivers/phy/phy-bcm-ns-usb3.c
-@@ -2,6 +2,7 @@
- * Broadcom Northstar USB 3.0 PHY Driver
- *
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ * Copyright (C) 2016 Broadcom
- *
- * All magic values used for initialization (and related comments) were obtained
- * from Broadcom's SDK:
-@@ -23,6 +24,23 @@
-
- #define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
-
-+#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
-+#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000
-+#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040
-+#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060
-+
-+/* Registers of PLL30 block */
-+#define BCM_NS_USB3_PLL_CONTROL 0x01
-+#define BCM_NS_USB3_PLLA_CONTROL0 0x0a
-+#define BCM_NS_USB3_PLLA_CONTROL1 0x0b
-+
-+/* Registers of TX PMD block */
-+#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01
-+
-+/* Registers of PIPE block */
-+#define BCM_NS_USB3_LFPS_CMP 0x02
-+#define BCM_NS_USB3_LFPS_DEGLITCH 0x03
-+
- enum bcm_ns_family {
- BCM_NS_UNKNOWN,
- BCM_NS_AX,
-@@ -76,8 +94,10 @@ static inline int bcm_ns_usb3_mii_mng_wa
- usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
- }
-
--static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
-+static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
-+ u16 value)
- {
-+ u32 tmp = 0;
- int err;
-
- err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
-@@ -86,7 +106,11 @@ static int bcm_ns_usb3_mii_mng_write32(s
- return err;
- }
-
-- writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-+ /* TODO: Use a proper MDIO bus layer */
-+ tmp |= 0x58020000; /* Magic value for MDIO PHY write */
-+ tmp |= reg << 18;
-+ tmp |= value;
-+ writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-
- return 0;
- }
-@@ -102,21 +126,22 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
- udelay(2);
-
- /* USB3 PLL Block */
-- err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
-+ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_PLL30_BLOCK);
- if (err < 0)
- return err;
-
- /* Assert Ana_Pllseq start */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000);
-
- /* Assert CML Divider ratio to 26 */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
-
- /* Asserting PLL Reset */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000);
-
- /* Deaaserting PLL Reset */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
-
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-@@ -125,22 +150,24 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
- writel(0, usb3->dmp + BCMA_RESET_CTL);
-
- /* PLL frequency monitor enable */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000);
-
- /* PIPE Block */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_PIPE_BLOCK);
-
- /* CMPMAX & CMPMINTH setting */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d);
-
- /* DEGLITCH MIN & MAX setting */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302);
-
- /* TXPMD block */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_TX_PMD_BLOCK);
-
- /* Enabling SSC */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
-
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-@@ -159,22 +186,24 @@ static int bcm_ns_usb3_phy_init_ns_ax(st
- udelay(2);
-
- /* PLL30 block */
-- err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
-+ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_PLL30_BLOCK);
- if (err < 0)
- return err;
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
-+ bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c);
-
- /* Enable SSC */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_TX_PMD_BLOCK);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
-+ bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
-
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
diff --git a/target/linux/bcm53xx/patches-4.4/080-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch b/target/linux/bcm53xx/patches-4.4/080-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch
deleted file mode 100644
index bc735a234e..0000000000
--- a/target/linux/bcm53xx/patches-4.4/080-USB-bcma-switch-to-GPIO-descriptor-for-power-control.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 9faae5a37b266afca6914163316856c5ed4ec366 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sun, 1 Nov 2015 10:04:41 +0100
-Subject: [PATCH] USB: bcma: switch to GPIO descriptor for power control
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far we were using simple (legacy) GPIO functions & some poor logic to
-control power. It got many drawbacks: we were ignoring OF flags
-(GPIO_ACTIVE_LOW), we were not setting direction to output and we were
-assuming gpio_request success all the time.
-Fix it by switching to gpiod functions and adding appropriate checks.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 21 ++++++++++-----------
- 1 file changed, 10 insertions(+), 11 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -21,6 +21,7 @@
- */
- #include <linux/bcma/bcma.h>
- #include <linux/delay.h>
-+#include <linux/gpio/consumer.h>
- #include <linux/platform_device.h>
- #include <linux/module.h>
- #include <linux/slab.h>
-@@ -36,6 +37,7 @@ MODULE_LICENSE("GPL");
- struct bcma_hcd_device {
- struct platform_device *ehci_dev;
- struct platform_device *ohci_dev;
-+ struct gpio_desc *gpio_desc;
- };
-
- /* Wait for bitmask in a register to get set or cleared.
-@@ -228,19 +230,12 @@ static void bcma_hcd_init_chip_arm(struc
-
- static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
- {
-- int gpio;
-+ struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
-
-- gpio = of_get_named_gpio(dev->dev.of_node, "vcc-gpio", 0);
-- if (!gpio_is_valid(gpio))
-+ if (IS_ERR_OR_NULL(usb_dev->gpio_desc))
- return;
-
-- if (val) {
-- gpio_request(gpio, "bcma-hcd-gpio");
-- gpio_set_value(gpio, 1);
-- } else {
-- gpio_set_value(gpio, 0);
-- gpio_free(gpio);
-- }
-+ gpiod_set_value(usb_dev->gpio_desc, val);
- }
-
- static const struct usb_ehci_pdata ehci_pdata = {
-@@ -314,7 +309,11 @@ static int bcma_hcd_probe(struct bcma_de
- if (!usb_dev)
- return -ENOMEM;
-
-- bcma_hci_platform_power_gpio(dev, true);
-+ if (dev->dev.of_node)
-+ usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
-+ &dev->dev.of_node->fwnode);
-+ if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
-+ gpiod_direction_output(usb_dev->gpio_desc, 1);
-
- switch (dev->id.id) {
- case BCMA_CORE_NS_USB20:
diff --git a/target/linux/bcm53xx/patches-4.4/081-0001-USB-bcma-make-helper-creating-platform-dev-more-gene.patch b/target/linux/bcm53xx/patches-4.4/081-0001-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
deleted file mode 100644
index 320b6dd31d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/081-0001-USB-bcma-make-helper-creating-platform-dev-more-gene.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From 352d9e2ee85b43170388599a17cd7b219f270163 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 5 Dec 2015 13:15:06 +0100
-Subject: [PATCH] USB: bcma: make helper creating platform dev more generic
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Having "bool ohci" argument in bcma_hcd_create_pdev function limited it
-to support two cases only (OHCI and EHCI) and put too much logic in it.
-Lets make caller pass all required data. This adds few extra arguments
-to the function call but will allow us to reuse this code and handle
-more cases in the future (e.g. add XHCI support).
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 24 +++++++++++++-----------
- 1 file changed, 13 insertions(+), 11 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -244,7 +244,10 @@ static const struct usb_ehci_pdata ehci_
- static const struct usb_ohci_pdata ohci_pdata = {
- };
-
--static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev, bool ohci, u32 addr)
-+static struct platform_device *bcma_hcd_create_pdev(struct bcma_device *dev,
-+ const char *name, u32 addr,
-+ const void *data,
-+ size_t size)
- {
- struct platform_device *hci_dev;
- struct resource hci_res[2];
-@@ -259,8 +262,7 @@ static struct platform_device *bcma_hcd_
- hci_res[1].start = dev->irq;
- hci_res[1].flags = IORESOURCE_IRQ;
-
-- hci_dev = platform_device_alloc(ohci ? "ohci-platform" :
-- "ehci-platform" , 0);
-+ hci_dev = platform_device_alloc(name, 0);
- if (!hci_dev)
- return ERR_PTR(-ENOMEM);
-
-@@ -271,12 +273,8 @@ static struct platform_device *bcma_hcd_
- ARRAY_SIZE(hci_res));
- if (ret)
- goto err_alloc;
-- if (ohci)
-- ret = platform_device_add_data(hci_dev, &ohci_pdata,
-- sizeof(ohci_pdata));
-- else
-- ret = platform_device_add_data(hci_dev, &ehci_pdata,
-- sizeof(ehci_pdata));
-+ if (data)
-+ ret = platform_device_add_data(hci_dev, data, size);
- if (ret)
- goto err_alloc;
- ret = platform_device_add(hci_dev);
-@@ -333,11 +331,15 @@ static int bcma_hcd_probe(struct bcma_de
- && chipinfo->rev == 0)
- ohci_addr = 0x18009000;
-
-- usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, true, ohci_addr);
-+ usb_dev->ohci_dev = bcma_hcd_create_pdev(dev, "ohci-platform",
-+ ohci_addr, &ohci_pdata,
-+ sizeof(ohci_pdata));
- if (IS_ERR(usb_dev->ohci_dev))
- return PTR_ERR(usb_dev->ohci_dev);
-
-- usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, false, dev->addr);
-+ usb_dev->ehci_dev = bcma_hcd_create_pdev(dev, "ehci-platform",
-+ dev->addr, &ehci_pdata,
-+ sizeof(ehci_pdata));
- if (IS_ERR(usb_dev->ehci_dev)) {
- err = PTR_ERR(usb_dev->ehci_dev);
- goto err_unregister_ohci_dev;
diff --git a/target/linux/bcm53xx/patches-4.4/081-0002-USB-bcma-separate-code-initializing-USB-2.0-core.patch b/target/linux/bcm53xx/patches-4.4/081-0002-USB-bcma-separate-code-initializing-USB-2.0-core.patch
deleted file mode 100644
index 36ce273e3d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/081-0002-USB-bcma-separate-code-initializing-USB-2.0-core.patch
+++ /dev/null
@@ -1,116 +0,0 @@
-From adbff3a4f93d8501e8ae11906268e21b086d57ed Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 5 Dec 2015 13:15:07 +0100
-Subject: [PATCH] USB: bcma: separate code initializing USB 2.0 core
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This splits one big probing function into two smaller ones. The main one
-is now responsible for the generic stuff: allocating memory & enabling
-power using GPIO. The new one contains code that is specific to the USB
-2.0 bcma core.
-This will allow adding support for the USB 3.0 bcma core (handling XHCI)
-in the future.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 59 ++++++++++++++++++++++++++++++---------------
- 1 file changed, 39 insertions(+), 20 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -35,6 +35,7 @@ MODULE_DESCRIPTION("Common USB driver fo
- MODULE_LICENSE("GPL");
-
- struct bcma_hcd_device {
-+ struct bcma_device *core;
- struct platform_device *ehci_dev;
- struct platform_device *ohci_dev;
- struct gpio_desc *gpio_desc;
-@@ -288,31 +289,16 @@ err_alloc:
- return ERR_PTR(ret);
- }
-
--static int bcma_hcd_probe(struct bcma_device *dev)
-+static int bcma_hcd_usb20_init(struct bcma_hcd_device *usb_dev)
- {
-- int err;
-+ struct bcma_device *dev = usb_dev->core;
-+ struct bcma_chipinfo *chipinfo = &dev->bus->chipinfo;
- u32 ohci_addr;
-- struct bcma_hcd_device *usb_dev;
-- struct bcma_chipinfo *chipinfo;
--
-- chipinfo = &dev->bus->chipinfo;
--
-- /* TODO: Probably need checks here; is the core connected? */
-+ int err;
-
- if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
- return -EOPNOTSUPP;
-
-- usb_dev = devm_kzalloc(&dev->dev, sizeof(struct bcma_hcd_device),
-- GFP_KERNEL);
-- if (!usb_dev)
-- return -ENOMEM;
--
-- if (dev->dev.of_node)
-- usb_dev->gpio_desc = devm_get_gpiod_from_child(&dev->dev, "vcc",
-- &dev->dev.of_node->fwnode);
-- if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
-- gpiod_direction_output(usb_dev->gpio_desc, 1);
--
- switch (dev->id.id) {
- case BCMA_CORE_NS_USB20:
- bcma_hcd_init_chip_arm(dev);
-@@ -345,7 +331,6 @@ static int bcma_hcd_probe(struct bcma_de
- goto err_unregister_ohci_dev;
- }
-
-- bcma_set_drvdata(dev, usb_dev);
- return 0;
-
- err_unregister_ohci_dev:
-@@ -353,6 +338,40 @@ err_unregister_ohci_dev:
- return err;
- }
-
-+static int bcma_hcd_probe(struct bcma_device *core)
-+{
-+ int err;
-+ struct bcma_hcd_device *usb_dev;
-+
-+ /* TODO: Probably need checks here; is the core connected? */
-+
-+ usb_dev = devm_kzalloc(&core->dev, sizeof(struct bcma_hcd_device),
-+ GFP_KERNEL);
-+ if (!usb_dev)
-+ return -ENOMEM;
-+ usb_dev->core = core;
-+
-+ if (core->dev.of_node)
-+ usb_dev->gpio_desc = devm_get_gpiod_from_child(&core->dev, "vcc",
-+ &core->dev.of_node->fwnode);
-+ if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
-+ gpiod_direction_output(usb_dev->gpio_desc, 1);
-+
-+ switch (core->id.id) {
-+ case BCMA_CORE_USB20_HOST:
-+ case BCMA_CORE_NS_USB20:
-+ err = bcma_hcd_usb20_init(usb_dev);
-+ if (err)
-+ return err;
-+ break;
-+ default:
-+ return -ENODEV;
-+ }
-+
-+ bcma_set_drvdata(core, usb_dev);
-+ return 0;
-+}
-+
- static void bcma_hcd_remove(struct bcma_device *dev)
- {
- struct bcma_hcd_device *usb_dev = bcma_get_drvdata(dev);
diff --git a/target/linux/bcm53xx/patches-4.4/081-0003-USB-bcma-use-simpler-devm-helper-for-getting-vcc-GPI.patch b/target/linux/bcm53xx/patches-4.4/081-0003-USB-bcma-use-simpler-devm-helper-for-getting-vcc-GPI.patch
deleted file mode 100644
index 840669ce4c..0000000000
--- a/target/linux/bcm53xx/patches-4.4/081-0003-USB-bcma-use-simpler-devm-helper-for-getting-vcc-GPI.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 1507372b97a098fd51b92c4dbdbbcd65cba26939 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 23 Mar 2016 12:37:11 +0100
-Subject: [PATCH] USB: bcma: use simpler devm helper for getting vcc GPIO
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Thanks to switching to devm_gpiod_get:
-1) We don't have to pass fwnode pointer
-2) We can request initial GPIO value at getting call
-This was successfully tested on Netgear R6250 (BCM4708).
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 6 ++----
- 1 file changed, 2 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -352,10 +352,8 @@ static int bcma_hcd_probe(struct bcma_de
- usb_dev->core = core;
-
- if (core->dev.of_node)
-- usb_dev->gpio_desc = devm_get_gpiod_from_child(&core->dev, "vcc",
-- &core->dev.of_node->fwnode);
-- if (!IS_ERR_OR_NULL(usb_dev->gpio_desc))
-- gpiod_direction_output(usb_dev->gpio_desc, 1);
-+ usb_dev->gpio_desc = devm_gpiod_get(&core->dev, "vcc",
-+ GPIOD_OUT_HIGH);
-
- switch (core->id.id) {
- case BCMA_CORE_USB20_HOST:
diff --git a/target/linux/bcm53xx/patches-4.4/082-0001-USB-bcma-initialize-Northstar-USB-3.0-controller.patch b/target/linux/bcm53xx/patches-4.4/082-0001-USB-bcma-initialize-Northstar-USB-3.0-controller.patch
deleted file mode 100644
index a1075b3a43..0000000000
--- a/target/linux/bcm53xx/patches-4.4/082-0001-USB-bcma-initialize-Northstar-USB-3.0-controller.patch
+++ /dev/null
@@ -1,67 +0,0 @@
-From 3cc7e7b7872ebd0f200b5450f5471bc3700de141 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Fri, 8 Jul 2016 14:02:50 +0200
-Subject: [PATCH] USB: bcma: initialize Northstar USB 3.0 controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's a rather simple controller, we just need to make sure USB is
-powered (using GPIO pin) and reset bus core. Once this is done it's
-safe to register XHCI controller and let it init PHY and do its magic.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -27,6 +27,7 @@
- #include <linux/slab.h>
- #include <linux/of.h>
- #include <linux/of_gpio.h>
-+#include <linux/of_platform.h>
- #include <linux/usb/ehci_pdriver.h>
- #include <linux/usb/ohci_pdriver.h>
-
-@@ -338,6 +339,18 @@ err_unregister_ohci_dev:
- return err;
- }
-
-+static int bcma_hcd_usb30_init(struct bcma_hcd_device *bcma_hcd)
-+{
-+ struct bcma_device *core = bcma_hcd->core;
-+ struct device *dev = &core->dev;
-+
-+ bcma_core_enable(core, 0);
-+
-+ of_platform_default_populate(dev->of_node, NULL, dev);
-+
-+ return 0;
-+}
-+
- static int bcma_hcd_probe(struct bcma_device *core)
- {
- int err;
-@@ -362,6 +375,11 @@ static int bcma_hcd_probe(struct bcma_de
- if (err)
- return err;
- break;
-+ case BCMA_CORE_NS_USB30:
-+ err = bcma_hcd_usb30_init(usb_dev);
-+ if (err)
-+ return err;
-+ break;
- default:
- return -ENODEV;
- }
-@@ -416,6 +434,7 @@ static int bcma_hcd_resume(struct bcma_d
- static const struct bcma_device_id bcma_hcd_table[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_USB20_HOST, BCMA_ANY_REV, BCMA_ANY_CLASS),
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB20, BCMA_ANY_REV, BCMA_ANY_CLASS),
-+ BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_USB30, BCMA_ANY_REV, BCMA_ANY_CLASS),
- {},
- };
- MODULE_DEVICE_TABLE(bcma, bcma_hcd_table);
diff --git a/target/linux/bcm53xx/patches-4.4/082-0002-USB-bcma-support-old-USB-2.0-controller-on-Northstar.patch b/target/linux/bcm53xx/patches-4.4/082-0002-USB-bcma-support-old-USB-2.0-controller-on-Northstar.patch
deleted file mode 100644
index 2762785f79..0000000000
--- a/target/linux/bcm53xx/patches-4.4/082-0002-USB-bcma-support-old-USB-2.0-controller-on-Northstar.patch
+++ /dev/null
@@ -1,163 +0,0 @@
-From d6b76c4ddb124dd22c6e910ca9332e472e7b3273 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 10 Aug 2016 11:56:46 +0200
-Subject: [PATCH] USB: bcma: support old USB 2.0 controller on Northstar
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently bcma-hcd driver handles 3 different bcma cores:
-1) BCMA_CORE_USB20_HOST (0x819)
-2) BCMA_CORE_NS_USB20 (0x504)
-3) BCMA_CORE_NS_USB30 (0x505)
-
-The first one was introduced years ago and so far was used on MIPS
-devices only. All Northstar (ARM) devices were using other two cores
-which allowed easy implementation of separated initialization paths.
-
-It seems however Broadcom decided to reuse this old USB 2.0 controller
-on some recently introduced cheaper Northstar BCM53573 SoCs. I noticed
-this on Tenda AC9 (based on BCM47189B0 belonging to BCM53573 family).
-
-There is no difference in this old controller core identification
-between MIPS and ARM devices: they share the same id and revision. We
-need different controller initialization procedure however.
-To handle this add a check for architecture and implement required
-initialization for ARM case.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 86 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/bcma/bcma_regs.h | 1 +
- 2 files changed, 83 insertions(+), 4 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -35,6 +35,9 @@ MODULE_AUTHOR("Hauke Mehrtens");
- MODULE_DESCRIPTION("Common USB driver for BCMA Bus");
- MODULE_LICENSE("GPL");
-
-+/* See BCMA_CLKCTLST_EXTRESREQ and BCMA_CLKCTLST_EXTRESST */
-+#define USB_BCMA_CLKCTLST_USB_CLK_REQ 0x00000100
-+
- struct bcma_hcd_device {
- struct bcma_device *core;
- struct platform_device *ehci_dev;
-@@ -166,6 +169,76 @@ static void bcma_hcd_init_chip_mips(stru
- }
- }
-
-+/**
-+ * bcma_hcd_usb20_old_arm_init - Initialize old USB 2.0 controller on ARM
-+ *
-+ * Old USB 2.0 core is identified as BCMA_CORE_USB20_HOST and was introduced
-+ * long before Northstar devices. It seems some cheaper chipsets like BCM53573
-+ * still use it.
-+ * Initialization of this old core differs between MIPS and ARM.
-+ */
-+static int bcma_hcd_usb20_old_arm_init(struct bcma_hcd_device *usb_dev)
-+{
-+ struct bcma_device *core = usb_dev->core;
-+ struct device *dev = &core->dev;
-+ struct bcma_device *pmu_core;
-+
-+ usleep_range(10000, 20000);
-+ if (core->id.rev < 5)
-+ return 0;
-+
-+ pmu_core = bcma_find_core(core->bus, BCMA_CORE_PMU);
-+ if (!pmu_core) {
-+ dev_err(dev, "Could not find PMU core\n");
-+ return -ENOENT;
-+ }
-+
-+ /* Take USB core out of reset */
-+ bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK | BCMA_IOCTL_FGC);
-+ usleep_range(100, 200);
-+ bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
-+ usleep_range(100, 200);
-+ bcma_awrite32(core, BCMA_RESET_CTL, 0);
-+ usleep_range(100, 200);
-+ bcma_awrite32(core, BCMA_IOCTL, BCMA_IOCTL_CLK);
-+ usleep_range(100, 200);
-+
-+ /* Enable Misc PLL */
-+ bcma_write32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT |
-+ BCMA_CLKCTLST_HQCLKREQ |
-+ USB_BCMA_CLKCTLST_USB_CLK_REQ);
-+ usleep_range(100, 200);
-+
-+ bcma_write32(core, 0x510, 0xc7f85000);
-+ bcma_write32(core, 0x510, 0xc7f85003);
-+ usleep_range(300, 600);
-+
-+ /* Program USB PHY PLL parameters */
-+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x6);
-+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x005360c1);
-+ usleep_range(100, 200);
-+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_ADDR, 0x7);
-+ bcma_write32(pmu_core, BCMA_CC_PMU_PLLCTL_DATA, 0x0);
-+ usleep_range(100, 200);
-+ bcma_set32(pmu_core, BCMA_CC_PMU_CTL, BCMA_CC_PMU_CTL_PLL_UPD);
-+ usleep_range(100, 200);
-+
-+ bcma_write32(core, 0x510, 0x7f8d007);
-+ udelay(1000);
-+
-+ /* Take controller out of reset */
-+ bcma_write32(core, 0x200, 0x4ff);
-+ usleep_range(25, 50);
-+ bcma_write32(core, 0x200, 0x6ff);
-+ usleep_range(25, 50);
-+ bcma_write32(core, 0x200, 0x7ff);
-+ usleep_range(25, 50);
-+
-+ of_platform_default_populate(dev->of_node, NULL, dev);
-+
-+ return 0;
-+}
-+
- static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
- {
- struct bcma_device *arm_core;
-@@ -370,19 +443,24 @@ static int bcma_hcd_probe(struct bcma_de
-
- switch (core->id.id) {
- case BCMA_CORE_USB20_HOST:
-+ if (IS_ENABLED(CONFIG_ARM))
-+ err = bcma_hcd_usb20_old_arm_init(usb_dev);
-+ else if (IS_ENABLED(CONFIG_MIPS))
-+ err = bcma_hcd_usb20_init(usb_dev);
-+ else
-+ err = -ENOTSUPP;
-+ break;
- case BCMA_CORE_NS_USB20:
- err = bcma_hcd_usb20_init(usb_dev);
-- if (err)
-- return err;
- break;
- case BCMA_CORE_NS_USB30:
- err = bcma_hcd_usb30_init(usb_dev);
-- if (err)
-- return err;
- break;
- default:
- return -ENODEV;
- }
-+ if (err)
-+ return err;
-
- bcma_set_drvdata(core, usb_dev);
- return 0;
---- a/include/linux/bcma/bcma_regs.h
-+++ b/include/linux/bcma/bcma_regs.h
-@@ -10,6 +10,7 @@
- #define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
- #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
- #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
-+#define BCMA_CLKCTLST_HQCLKREQ 0x00000040 /* HQ Clock */
- #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
- #define BCMA_CLKCTLST_EXTRESREQ_SHIFT 8
- #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
diff --git a/target/linux/bcm53xx/patches-4.4/082-0003-USB-bcma-drop-Northstar-PHY-2.0-initialization-code.patch b/target/linux/bcm53xx/patches-4.4/082-0003-USB-bcma-drop-Northstar-PHY-2.0-initialization-code.patch
deleted file mode 100644
index 0af94e6137..0000000000
--- a/target/linux/bcm53xx/patches-4.4/082-0003-USB-bcma-drop-Northstar-PHY-2.0-initialization-code.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From e8624859dde2ad07633dac7ec86629a516411ea1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 18:01:43 +0200
-Subject: [PATCH] USB: bcma: drop Northstar PHY 2.0 initialization code
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This driver should initialize controller only, PHY initialization should
-be handled by separated PHY driver. We already have phy-bcm-ns-usb2 in
-place so let it makes its duty.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----
- drivers/usb/host/bcma-hcd.c | 80 ++++++++++++++-------------------------------
- 1 file changed, 25 insertions(+), 55 deletions(-)
-
---- a/drivers/usb/host/bcma-hcd.c
-+++ b/drivers/usb/host/bcma-hcd.c
-@@ -239,44 +239,10 @@ static int bcma_hcd_usb20_old_arm_init(s
- return 0;
- }
-
--static void bcma_hcd_init_chip_arm_phy(struct bcma_device *dev)
--{
-- struct bcma_device *arm_core;
-- void __iomem *dmu;
--
-- arm_core = bcma_find_core(dev->bus, BCMA_CORE_ARMCA9);
-- if (!arm_core) {
-- dev_err(&dev->dev, "can not find ARM Cortex A9 ihost core\n");
-- return;
-- }
--
-- dmu = ioremap_nocache(arm_core->addr_s[0], 0x1000);
-- if (!dmu) {
-- dev_err(&dev->dev, "can not map ARM Cortex A9 ihost core\n");
-- return;
-- }
--
-- /* Unlock DMU PLL settings */
-- iowrite32(0x0000ea68, dmu + 0x180);
--
-- /* Write USB 2.0 PLL control setting */
-- iowrite32(0x00dd10c3, dmu + 0x164);
--
-- /* Lock DMU PLL settings */
-- iowrite32(0x00000000, dmu + 0x180);
--
-- iounmap(dmu);
--}
--
--static void bcma_hcd_init_chip_arm_hc(struct bcma_device *dev)
-+static void bcma_hcd_usb20_ns_init_hc(struct bcma_device *dev)
- {
- u32 val;
-
-- /*
-- * Delay after PHY initialized to ensure HC is ready to be configured
-- */
-- usleep_range(1000, 2000);
--
- /* Set packet buffer OUT threshold */
- val = bcma_read32(dev, 0x94);
- val &= 0xffff;
-@@ -287,20 +253,33 @@ static void bcma_hcd_init_chip_arm_hc(st
- val = bcma_read32(dev, 0x9c);
- val |= 1;
- bcma_write32(dev, 0x9c, val);
-+
-+ /*
-+ * Broadcom initializes PHY and then waits to ensure HC is ready to be
-+ * configured. In our case the order is reversed. We just initialized
-+ * controller and we let HCD initialize PHY, so let's wait (sleep) now.
-+ */
-+ usleep_range(1000, 2000);
- }
-
--static void bcma_hcd_init_chip_arm(struct bcma_device *dev)
-+/**
-+ * bcma_hcd_usb20_ns_init - Initialize Northstar USB 2.0 controller
-+ */
-+static int bcma_hcd_usb20_ns_init(struct bcma_hcd_device *bcma_hcd)
- {
-- bcma_core_enable(dev, 0);
-+ struct bcma_device *core = bcma_hcd->core;
-+ struct bcma_chipinfo *ci = &core->bus->chipinfo;
-+ struct device *dev = &core->dev;
-+
-+ bcma_core_enable(core, 0);
-
-- if (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4707 ||
-- dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM53018) {
-- if (dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4707 ||
-- dev->bus->chipinfo.pkg == BCMA_PKG_ID_BCM4708)
-- bcma_hcd_init_chip_arm_phy(dev);
-+ if (ci->id == BCMA_CHIP_ID_BCM4707 ||
-+ ci->id == BCMA_CHIP_ID_BCM53018)
-+ bcma_hcd_usb20_ns_init_hc(core);
-
-- bcma_hcd_init_chip_arm_hc(dev);
-- }
-+ of_platform_default_populate(dev->of_node, NULL, dev);
-+
-+ return 0;
- }
-
- static void bcma_hci_platform_power_gpio(struct bcma_device *dev, bool val)
-@@ -373,16 +352,7 @@ static int bcma_hcd_usb20_init(struct bc
- if (dma_set_mask_and_coherent(dev->dma_dev, DMA_BIT_MASK(32)))
- return -EOPNOTSUPP;
-
-- switch (dev->id.id) {
-- case BCMA_CORE_NS_USB20:
-- bcma_hcd_init_chip_arm(dev);
-- break;
-- case BCMA_CORE_USB20_HOST:
-- bcma_hcd_init_chip_mips(dev);
-- break;
-- default:
-- return -ENODEV;
-- }
-+ bcma_hcd_init_chip_mips(dev);
-
- /* In AI chips EHCI is addrspace 0, OHCI is 1 */
- ohci_addr = dev->addr_s[0];
-@@ -451,7 +421,7 @@ static int bcma_hcd_probe(struct bcma_de
- err = -ENOTSUPP;
- break;
- case BCMA_CORE_NS_USB20:
-- err = bcma_hcd_usb20_init(usb_dev);
-+ err = bcma_hcd_usb20_ns_init(usb_dev);
- break;
- case BCMA_CORE_NS_USB30:
- err = bcma_hcd_usb30_init(usb_dev);
diff --git a/target/linux/bcm53xx/patches-4.4/083-0001-spi-bcm-qspi-Add-Broadcom-MSPI-driver.patch b/target/linux/bcm53xx/patches-4.4/083-0001-spi-bcm-qspi-Add-Broadcom-MSPI-driver.patch
deleted file mode 100644
index b10ba83c69..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0001-spi-bcm-qspi-Add-Broadcom-MSPI-driver.patch
+++ /dev/null
@@ -1,832 +0,0 @@
-From fa236a7ef24048bafaeed13f68df35a819794758 Mon Sep 17 00:00:00 2001
-From: Kamal Dasu <kdasu.kdev@gmail.com>
-Date: Wed, 24 Aug 2016 18:04:23 -0400
-Subject: [PATCH] spi: bcm-qspi: Add Broadcom MSPI driver
-
-Master SPI driver for Broadcom settop, iProc SoCs. The driver
-is used for devices that use SPI protocol on BRCMSTB, NSP, NS2
-SoCs. SoC platform driver call exported porbe(), remove()
-and suspend/resume pm_ops implemented in this common driver.
-
-Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
-Signed-off-by: Yendapally Reddy Dhananjaya Reddy
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/Kconfig | 10 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-bcm-qspi.c | 712 +++++++++++++++++++++++++++++++++++++++++++++
- drivers/spi/spi-bcm-qspi.h | 63 ++++
- 4 files changed, 786 insertions(+)
- create mode 100644 drivers/spi/spi-bcm-qspi.c
- create mode 100644 drivers/spi/spi-bcm-qspi.h
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -147,6 +147,16 @@ config SPI_BCM63XX_HSSPI
- This enables support for the High Speed SPI controller present on
- newer Broadcom BCM63XX SoCs.
-
-+config SPI_BCM_QSPI
-+ tristate "Broadcom BSPI and MSPI controller support"
-+ depends on ARCH_BRCMSTB || ARCH_BCM || ARCH_BCM_IPROC || COMPILE_TEST
-+ default ARCH_BCM_IPROC
-+ help
-+ Enables support for the Broadcom SPI flash and MSPI controller.
-+ Select this option for any one of BRCMSTB, iProc NSP and NS2 SoCs
-+ based platforms. This driver works for both SPI master for spi-nor
-+ flash device as well as MSPI device.
-+
- config SPI_BITBANG
- tristate "Utilities for Bitbanging SPI masters"
- help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
- obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
- obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
- obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
-+obj-$(CONFIG_SPI_BCM_QSPI) += spi-bcm-qspi.o
- obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
- obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
- obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -0,0 +1,712 @@
-+/*
-+ * Driver for Broadcom BRCMSTB, NSP, NS2, Cygnus SPI Controllers
-+ *
-+ * Copyright 2016 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, version 2, as
-+ * published by the Free Software Foundation (the "GPL").
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License version 2 (GPLv2) for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * version 2 (GPLv2) along with this source code.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mtd/cfi.h>
-+#include <linux/mtd/spi-nor.h>
-+#include <linux/of.h>
-+#include <linux/of_irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/spi/spi.h>
-+#include <linux/sysfs.h>
-+#include <linux/types.h>
-+#include "spi-bcm-qspi.h"
-+
-+#define DRIVER_NAME "bcm_qspi"
-+
-+/* MSPI register offsets */
-+#define MSPI_SPCR0_LSB 0x000
-+#define MSPI_SPCR0_MSB 0x004
-+#define MSPI_SPCR1_LSB 0x008
-+#define MSPI_SPCR1_MSB 0x00c
-+#define MSPI_NEWQP 0x010
-+#define MSPI_ENDQP 0x014
-+#define MSPI_SPCR2 0x018
-+#define MSPI_MSPI_STATUS 0x020
-+#define MSPI_CPTQP 0x024
-+#define MSPI_SPCR3 0x028
-+#define MSPI_TXRAM 0x040
-+#define MSPI_RXRAM 0x0c0
-+#define MSPI_CDRAM 0x140
-+#define MSPI_WRITE_LOCK 0x180
-+
-+#define MSPI_MASTER_BIT BIT(7)
-+
-+#define MSPI_NUM_CDRAM 16
-+#define MSPI_CDRAM_CONT_BIT BIT(7)
-+#define MSPI_CDRAM_BITSE_BIT BIT(6)
-+#define MSPI_CDRAM_PCS 0xf
-+
-+#define MSPI_SPCR2_SPE BIT(6)
-+#define MSPI_SPCR2_CONT_AFTER_CMD BIT(7)
-+
-+#define MSPI_MSPI_STATUS_SPIF BIT(0)
-+
-+#define INTR_BASE_BIT_SHIFT 0x02
-+#define INTR_COUNT 0x07
-+
-+#define NUM_CHIPSELECT 4
-+#define QSPI_SPBR_MIN 8U
-+#define QSPI_SPBR_MAX 255U
-+
-+#define OPCODE_DIOR 0xBB
-+#define OPCODE_QIOR 0xEB
-+#define OPCODE_DIOR_4B 0xBC
-+#define OPCODE_QIOR_4B 0xEC
-+
-+#define MAX_CMD_SIZE 6
-+
-+#define ADDR_4MB_MASK GENMASK(22, 0)
-+
-+/* stop at end of transfer, no other reason */
-+#define TRANS_STATUS_BREAK_NONE 0
-+/* stop at end of spi_message */
-+#define TRANS_STATUS_BREAK_EOM 1
-+/* stop at end of spi_transfer if delay */
-+#define TRANS_STATUS_BREAK_DELAY 2
-+/* stop at end of spi_transfer if cs_change */
-+#define TRANS_STATUS_BREAK_CS_CHANGE 4
-+/* stop if we run out of bytes */
-+#define TRANS_STATUS_BREAK_NO_BYTES 8
-+
-+/* events that make us stop filling TX slots */
-+#define TRANS_STATUS_BREAK_TX (TRANS_STATUS_BREAK_EOM | \
-+ TRANS_STATUS_BREAK_DELAY | \
-+ TRANS_STATUS_BREAK_CS_CHANGE)
-+
-+/* events that make us deassert CS */
-+#define TRANS_STATUS_BREAK_DESELECT (TRANS_STATUS_BREAK_EOM | \
-+ TRANS_STATUS_BREAK_CS_CHANGE)
-+
-+struct bcm_qspi_parms {
-+ u32 speed_hz;
-+ u8 mode;
-+ u8 bits_per_word;
-+};
-+
-+enum base_type {
-+ MSPI,
-+ CHIP_SELECT,
-+ BASEMAX,
-+};
-+
-+struct bcm_qspi_irq {
-+ const char *irq_name;
-+ const irq_handler_t irq_handler;
-+ u32 mask;
-+};
-+
-+struct bcm_qspi_dev_id {
-+ const struct bcm_qspi_irq *irqp;
-+ void *dev;
-+};
-+
-+struct qspi_trans {
-+ struct spi_transfer *trans;
-+ int byte;
-+};
-+
-+struct bcm_qspi {
-+ struct platform_device *pdev;
-+ struct spi_master *master;
-+ struct clk *clk;
-+ u32 base_clk;
-+ u32 max_speed_hz;
-+ void __iomem *base[BASEMAX];
-+ struct bcm_qspi_parms last_parms;
-+ struct qspi_trans trans_pos;
-+ int curr_cs;
-+ u32 s3_strap_override_ctrl;
-+ bool big_endian;
-+ int num_irqs;
-+ struct bcm_qspi_dev_id *dev_ids;
-+ struct completion mspi_done;
-+};
-+
-+/* Read qspi controller register*/
-+static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
-+ unsigned int offset)
-+{
-+ return bcm_qspi_readl(qspi->big_endian, qspi->base[type] + offset);
-+}
-+
-+/* Write qspi controller register*/
-+static inline void bcm_qspi_write(struct bcm_qspi *qspi, enum base_type type,
-+ unsigned int offset, unsigned int data)
-+{
-+ bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
-+}
-+
-+static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
-+{
-+ u32 data = 0;
-+
-+ if (qspi->curr_cs == cs)
-+ return;
-+ if (qspi->base[CHIP_SELECT]) {
-+ data = bcm_qspi_read(qspi, CHIP_SELECT, 0);
-+ data = (data & ~0xff) | (1 << cs);
-+ bcm_qspi_write(qspi, CHIP_SELECT, 0, data);
-+ usleep_range(10, 20);
-+ }
-+ qspi->curr_cs = cs;
-+}
-+
-+/* MSPI helpers */
-+static void bcm_qspi_hw_set_parms(struct bcm_qspi *qspi,
-+ const struct bcm_qspi_parms *xp)
-+{
-+ u32 spcr, spbr = 0;
-+
-+ if (xp->speed_hz)
-+ spbr = qspi->base_clk / (2 * xp->speed_hz);
-+
-+ spcr = clamp_val(spbr, QSPI_SPBR_MIN, QSPI_SPBR_MAX);
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_LSB, spcr);
-+
-+ spcr = MSPI_MASTER_BIT;
-+ /* for 16 bit the data should be zero */
-+ if (xp->bits_per_word != 16)
-+ spcr |= xp->bits_per_word << 2;
-+ spcr |= xp->mode & 3;
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR0_MSB, spcr);
-+
-+ qspi->last_parms = *xp;
-+}
-+
-+static void bcm_qspi_update_parms(struct bcm_qspi *qspi,
-+ struct spi_device *spi,
-+ struct spi_transfer *trans)
-+{
-+ struct bcm_qspi_parms xp;
-+
-+ xp.speed_hz = trans->speed_hz;
-+ xp.bits_per_word = trans->bits_per_word;
-+ xp.mode = spi->mode;
-+
-+ bcm_qspi_hw_set_parms(qspi, &xp);
-+}
-+
-+static int bcm_qspi_setup(struct spi_device *spi)
-+{
-+ struct bcm_qspi_parms *xp;
-+
-+ if (spi->bits_per_word > 16)
-+ return -EINVAL;
-+
-+ xp = spi_get_ctldata(spi);
-+ if (!xp) {
-+ xp = kzalloc(sizeof(*xp), GFP_KERNEL);
-+ if (!xp)
-+ return -ENOMEM;
-+ spi_set_ctldata(spi, xp);
-+ }
-+ xp->speed_hz = spi->max_speed_hz;
-+ xp->mode = spi->mode;
-+
-+ if (spi->bits_per_word)
-+ xp->bits_per_word = spi->bits_per_word;
-+ else
-+ xp->bits_per_word = 8;
-+
-+ return 0;
-+}
-+
-+static int update_qspi_trans_byte_count(struct bcm_qspi *qspi,
-+ struct qspi_trans *qt, int flags)
-+{
-+ int ret = TRANS_STATUS_BREAK_NONE;
-+
-+ /* count the last transferred bytes */
-+ if (qt->trans->bits_per_word <= 8)
-+ qt->byte++;
-+ else
-+ qt->byte += 2;
-+
-+ if (qt->byte >= qt->trans->len) {
-+ /* we're at the end of the spi_transfer */
-+
-+ /* in TX mode, need to pause for a delay or CS change */
-+ if (qt->trans->delay_usecs &&
-+ (flags & TRANS_STATUS_BREAK_DELAY))
-+ ret |= TRANS_STATUS_BREAK_DELAY;
-+ if (qt->trans->cs_change &&
-+ (flags & TRANS_STATUS_BREAK_CS_CHANGE))
-+ ret |= TRANS_STATUS_BREAK_CS_CHANGE;
-+ if (ret)
-+ goto done;
-+
-+ dev_dbg(&qspi->pdev->dev, "advance msg exit\n");
-+ if (spi_transfer_is_last(qspi->master, qt->trans))
-+ ret = TRANS_STATUS_BREAK_EOM;
-+ else
-+ ret = TRANS_STATUS_BREAK_NO_BYTES;
-+
-+ qt->trans = NULL;
-+ }
-+
-+done:
-+ dev_dbg(&qspi->pdev->dev, "trans %p len %d byte %d ret %x\n",
-+ qt->trans, qt->trans ? qt->trans->len : 0, qt->byte, ret);
-+ return ret;
-+}
-+
-+static inline u8 read_rxram_slot_u8(struct bcm_qspi *qspi, int slot)
-+{
-+ u32 slot_offset = MSPI_RXRAM + (slot << 3) + 0x4;
-+
-+ /* mask out reserved bits */
-+ return bcm_qspi_read(qspi, MSPI, slot_offset) & 0xff;
-+}
-+
-+static inline u16 read_rxram_slot_u16(struct bcm_qspi *qspi, int slot)
-+{
-+ u32 reg_offset = MSPI_RXRAM;
-+ u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
-+ u32 msb_offset = reg_offset + (slot << 3);
-+
-+ return (bcm_qspi_read(qspi, MSPI, lsb_offset) & 0xff) |
-+ ((bcm_qspi_read(qspi, MSPI, msb_offset) & 0xff) << 8);
-+}
-+
-+static void read_from_hw(struct bcm_qspi *qspi, int slots)
-+{
-+ struct qspi_trans tp;
-+ int slot;
-+
-+ if (slots > MSPI_NUM_CDRAM) {
-+ /* should never happen */
-+ dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
-+ return;
-+ }
-+
-+ tp = qspi->trans_pos;
-+
-+ for (slot = 0; slot < slots; slot++) {
-+ if (tp.trans->bits_per_word <= 8) {
-+ u8 *buf = tp.trans->rx_buf;
-+
-+ if (buf)
-+ buf[tp.byte] = read_rxram_slot_u8(qspi, slot);
-+ dev_dbg(&qspi->pdev->dev, "RD %02x\n",
-+ buf ? buf[tp.byte] : 0xff);
-+ } else {
-+ u16 *buf = tp.trans->rx_buf;
-+
-+ if (buf)
-+ buf[tp.byte / 2] = read_rxram_slot_u16(qspi,
-+ slot);
-+ dev_dbg(&qspi->pdev->dev, "RD %04x\n",
-+ buf ? buf[tp.byte] : 0xffff);
-+ }
-+
-+ update_qspi_trans_byte_count(qspi, &tp,
-+ TRANS_STATUS_BREAK_NONE);
-+ }
-+
-+ qspi->trans_pos = tp;
-+}
-+
-+static inline void write_txram_slot_u8(struct bcm_qspi *qspi, int slot,
-+ u8 val)
-+{
-+ u32 reg_offset = MSPI_TXRAM + (slot << 3);
-+
-+ /* mask out reserved bits */
-+ bcm_qspi_write(qspi, MSPI, reg_offset, val);
-+}
-+
-+static inline void write_txram_slot_u16(struct bcm_qspi *qspi, int slot,
-+ u16 val)
-+{
-+ u32 reg_offset = MSPI_TXRAM;
-+ u32 msb_offset = reg_offset + (slot << 3);
-+ u32 lsb_offset = reg_offset + (slot << 3) + 0x4;
-+
-+ bcm_qspi_write(qspi, MSPI, msb_offset, (val >> 8));
-+ bcm_qspi_write(qspi, MSPI, lsb_offset, (val & 0xff));
-+}
-+
-+static inline u32 read_cdram_slot(struct bcm_qspi *qspi, int slot)
-+{
-+ return bcm_qspi_read(qspi, MSPI, MSPI_CDRAM + (slot << 2));
-+}
-+
-+static inline void write_cdram_slot(struct bcm_qspi *qspi, int slot, u32 val)
-+{
-+ bcm_qspi_write(qspi, MSPI, (MSPI_CDRAM + (slot << 2)), val);
-+}
-+
-+/* Return number of slots written */
-+static int write_to_hw(struct bcm_qspi *qspi, struct spi_device *spi)
-+{
-+ struct qspi_trans tp;
-+ int slot = 0, tstatus = 0;
-+ u32 mspi_cdram = 0;
-+
-+ tp = qspi->trans_pos;
-+ bcm_qspi_update_parms(qspi, spi, tp.trans);
-+
-+ /* Run until end of transfer or reached the max data */
-+ while (!tstatus && slot < MSPI_NUM_CDRAM) {
-+ if (tp.trans->bits_per_word <= 8) {
-+ const u8 *buf = tp.trans->tx_buf;
-+ u8 val = buf ? buf[tp.byte] : 0xff;
-+
-+ write_txram_slot_u8(qspi, slot, val);
-+ dev_dbg(&qspi->pdev->dev, "WR %02x\n", val);
-+ } else {
-+ const u16 *buf = tp.trans->tx_buf;
-+ u16 val = buf ? buf[tp.byte / 2] : 0xffff;
-+
-+ write_txram_slot_u16(qspi, slot, val);
-+ dev_dbg(&qspi->pdev->dev, "WR %04x\n", val);
-+ }
-+ mspi_cdram = MSPI_CDRAM_CONT_BIT;
-+ mspi_cdram |= (~(1 << spi->chip_select) &
-+ MSPI_CDRAM_PCS);
-+ mspi_cdram |= ((tp.trans->bits_per_word <= 8) ? 0 :
-+ MSPI_CDRAM_BITSE_BIT);
-+
-+ write_cdram_slot(qspi, slot, mspi_cdram);
-+
-+ tstatus = update_qspi_trans_byte_count(qspi, &tp,
-+ TRANS_STATUS_BREAK_TX);
-+ slot++;
-+ }
-+
-+ if (!slot) {
-+ dev_err(&qspi->pdev->dev, "%s: no data to send?", __func__);
-+ goto done;
-+ }
-+
-+ dev_dbg(&qspi->pdev->dev, "submitting %d slots\n", slot);
-+ bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
-+ bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, slot - 1);
-+
-+ if (tstatus & TRANS_STATUS_BREAK_DESELECT) {
-+ mspi_cdram = read_cdram_slot(qspi, slot - 1) &
-+ ~MSPI_CDRAM_CONT_BIT;
-+ write_cdram_slot(qspi, slot - 1, mspi_cdram);
-+ }
-+
-+ /* Must flush previous writes before starting MSPI operation */
-+ mb();
-+ /* Set cont | spe | spifie */
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0xe0);
-+
-+done:
-+ return slot;
-+}
-+
-+static int bcm_qspi_transfer_one(struct spi_master *master,
-+ struct spi_device *spi,
-+ struct spi_transfer *trans)
-+{
-+ struct bcm_qspi *qspi = spi_master_get_devdata(master);
-+ int slots;
-+ unsigned long timeo = msecs_to_jiffies(100);
-+
-+ bcm_qspi_chip_select(qspi, spi->chip_select);
-+ qspi->trans_pos.trans = trans;
-+ qspi->trans_pos.byte = 0;
-+
-+ while (qspi->trans_pos.byte < trans->len) {
-+ reinit_completion(&qspi->mspi_done);
-+
-+ slots = write_to_hw(qspi, spi);
-+ if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) {
-+ dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ read_from_hw(qspi, slots);
-+ }
-+
-+ return 0;
-+}
-+
-+static void bcm_qspi_cleanup(struct spi_device *spi)
-+{
-+ struct bcm_qspi_parms *xp = spi_get_ctldata(spi);
-+
-+ kfree(xp);
-+}
-+
-+static irqreturn_t bcm_qspi_mspi_l2_isr(int irq, void *dev_id)
-+{
-+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
-+ struct bcm_qspi *qspi = qspi_dev_id->dev;
-+ u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
-+
-+ if (status & MSPI_MSPI_STATUS_SPIF) {
-+ /* clear interrupt */
-+ status &= ~MSPI_MSPI_STATUS_SPIF;
-+ bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
-+ complete(&qspi->mspi_done);
-+ return IRQ_HANDLED;
-+ } else {
-+ return IRQ_NONE;
-+ }
-+}
-+
-+static const struct bcm_qspi_irq qspi_irq_tab[] = {
-+ {
-+ .irq_name = "mspi_done",
-+ .irq_handler = bcm_qspi_mspi_l2_isr,
-+ .mask = INTR_MSPI_DONE_MASK,
-+ },
-+ {
-+ .irq_name = "mspi_halted",
-+ .irq_handler = bcm_qspi_mspi_l2_isr,
-+ .mask = INTR_MSPI_HALTED_MASK,
-+ },
-+};
-+
-+static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
-+{
-+ struct bcm_qspi_parms parms;
-+
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_LSB, 0);
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR1_MSB, 0);
-+ bcm_qspi_write(qspi, MSPI, MSPI_NEWQP, 0);
-+ bcm_qspi_write(qspi, MSPI, MSPI_ENDQP, 0);
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0x20);
-+
-+ parms.mode = SPI_MODE_3;
-+ parms.bits_per_word = 8;
-+ parms.speed_hz = qspi->max_speed_hz;
-+ bcm_qspi_hw_set_parms(qspi, &parms);
-+}
-+
-+static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
-+{
-+ bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
-+}
-+
-+static const struct of_device_id bcm_qspi_of_match[] = {
-+ { .compatible = "brcm,spi-bcm-qspi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
-+
-+int bcm_qspi_probe(struct platform_device *pdev,
-+ struct bcm_qspi_soc_intc *soc)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct bcm_qspi *qspi;
-+ struct spi_master *master;
-+ struct resource *res;
-+ int irq, ret = 0, num_ints = 0;
-+ u32 val;
-+ const char *name = NULL;
-+ int num_irqs = ARRAY_SIZE(qspi_irq_tab);
-+
-+ /* We only support device-tree instantiation */
-+ if (!dev->of_node)
-+ return -ENODEV;
-+
-+ if (!of_match_node(bcm_qspi_of_match, dev->of_node))
-+ return -ENODEV;
-+
-+ master = spi_alloc_master(dev, sizeof(struct bcm_qspi));
-+ if (!master) {
-+ dev_err(dev, "error allocating spi_master\n");
-+ return -ENOMEM;
-+ }
-+
-+ qspi = spi_master_get_devdata(master);
-+ qspi->pdev = pdev;
-+ qspi->trans_pos.trans = NULL;
-+ qspi->trans_pos.byte = 0;
-+ qspi->master = master;
-+
-+ master->bus_num = -1;
-+ master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
-+ master->setup = bcm_qspi_setup;
-+ master->transfer_one = bcm_qspi_transfer_one;
-+ master->cleanup = bcm_qspi_cleanup;
-+ master->dev.of_node = dev->of_node;
-+ master->num_chipselect = NUM_CHIPSELECT;
-+
-+ qspi->big_endian = of_device_is_big_endian(dev->of_node);
-+
-+ if (!of_property_read_u32(dev->of_node, "num-cs", &val))
-+ master->num_chipselect = val;
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "hif_mspi");
-+ if (!res)
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "mspi");
-+
-+ if (res) {
-+ qspi->base[MSPI] = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(qspi->base[MSPI])) {
-+ ret = PTR_ERR(qspi->base[MSPI]);
-+ goto qspi_probe_err;
-+ }
-+ } else {
-+ goto qspi_probe_err;
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
-+ if (res) {
-+ qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(qspi->base[CHIP_SELECT])) {
-+ ret = PTR_ERR(qspi->base[CHIP_SELECT]);
-+ goto qspi_probe_err;
-+ }
-+ }
-+
-+ qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
-+ GFP_KERNEL);
-+ if (IS_ERR(qspi->dev_ids)) {
-+ ret = PTR_ERR(qspi->dev_ids);
-+ goto qspi_probe_err;
-+ }
-+
-+ for (val = 0; val < num_irqs; val++) {
-+ irq = -1;
-+ name = qspi_irq_tab[val].irq_name;
-+ irq = platform_get_irq_byname(pdev, name);
-+
-+ if (irq >= 0) {
-+ ret = devm_request_irq(&pdev->dev, irq,
-+ qspi_irq_tab[val].irq_handler, 0,
-+ name,
-+ &qspi->dev_ids[val]);
-+ if (ret < 0) {
-+ dev_err(&pdev->dev, "IRQ %s not found\n", name);
-+ goto qspi_probe_err;
-+ }
-+
-+ qspi->dev_ids[val].dev = qspi;
-+ qspi->dev_ids[val].irqp = &qspi_irq_tab[val];
-+ num_ints++;
-+ dev_dbg(&pdev->dev, "registered IRQ %s %d\n",
-+ qspi_irq_tab[val].irq_name,
-+ irq);
-+ }
-+ }
-+
-+ if (!num_ints) {
-+ dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
-+ goto qspi_probe_err;
-+ }
-+
-+ qspi->clk = devm_clk_get(&pdev->dev, NULL);
-+ if (IS_ERR(qspi->clk)) {
-+ dev_warn(dev, "unable to get clock\n");
-+ goto qspi_probe_err;
-+ }
-+
-+ ret = clk_prepare_enable(qspi->clk);
-+ if (ret) {
-+ dev_err(dev, "failed to prepare clock\n");
-+ goto qspi_probe_err;
-+ }
-+
-+ qspi->base_clk = clk_get_rate(qspi->clk);
-+ qspi->max_speed_hz = qspi->base_clk / (QSPI_SPBR_MIN * 2);
-+
-+ bcm_qspi_hw_init(qspi);
-+ init_completion(&qspi->mspi_done);
-+ qspi->curr_cs = -1;
-+
-+ platform_set_drvdata(pdev, qspi);
-+ ret = devm_spi_register_master(&pdev->dev, master);
-+ if (ret < 0) {
-+ dev_err(dev, "can't register master\n");
-+ goto qspi_reg_err;
-+ }
-+
-+ return 0;
-+
-+qspi_reg_err:
-+ bcm_qspi_hw_uninit(qspi);
-+ clk_disable_unprepare(qspi->clk);
-+qspi_probe_err:
-+ spi_master_put(master);
-+ kfree(qspi->dev_ids);
-+ return ret;
-+}
-+/* probe function to be called by SoC specific platform driver probe */
-+EXPORT_SYMBOL_GPL(bcm_qspi_probe);
-+
-+int bcm_qspi_remove(struct platform_device *pdev)
-+{
-+ struct bcm_qspi *qspi = platform_get_drvdata(pdev);
-+
-+ platform_set_drvdata(pdev, NULL);
-+ bcm_qspi_hw_uninit(qspi);
-+ clk_disable_unprepare(qspi->clk);
-+ kfree(qspi->dev_ids);
-+ spi_unregister_master(qspi->master);
-+
-+ return 0;
-+}
-+/* function to be called by SoC specific platform driver remove() */
-+EXPORT_SYMBOL_GPL(bcm_qspi_remove);
-+
-+#ifdef CONFIG_PM_SLEEP
-+static int bcm_qspi_suspend(struct device *dev)
-+{
-+ struct bcm_qspi *qspi = dev_get_drvdata(dev);
-+
-+ spi_master_suspend(qspi->master);
-+ clk_disable(qspi->clk);
-+ bcm_qspi_hw_uninit(qspi);
-+
-+ return 0;
-+};
-+
-+static int bcm_qspi_resume(struct device *dev)
-+{
-+ struct bcm_qspi *qspi = dev_get_drvdata(dev);
-+ int ret = 0;
-+
-+ bcm_qspi_hw_init(qspi);
-+ bcm_qspi_chip_select(qspi, qspi->curr_cs);
-+ ret = clk_enable(qspi->clk);
-+ if (!ret)
-+ spi_master_resume(qspi->master);
-+
-+ return ret;
-+}
-+#endif /* CONFIG_PM_SLEEP */
-+
-+const struct dev_pm_ops bcm_qspi_pm_ops = {
-+ .suspend = bcm_qspi_suspend,
-+ .resume = bcm_qspi_resume,
-+};
-+/* pm_ops to be called by SoC specific platform driver */
-+EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops);
-+
-+MODULE_AUTHOR("Kamal Dasu");
-+MODULE_DESCRIPTION("Broadcom QSPI driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:" DRIVER_NAME);
---- /dev/null
-+++ b/drivers/spi/spi-bcm-qspi.h
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright 2016 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, version 2, as
-+ * published by the Free Software Foundation (the "GPL").
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License version 2 (GPLv2) for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * version 2 (GPLv2) along with this source code.
-+ */
-+
-+#ifndef __SPI_BCM_QSPI_H__
-+#define __SPI_BCM_QSPI_H__
-+
-+#include <linux/types.h>
-+#include <linux/io.h>
-+
-+/* MSPI Interrupt masks */
-+#define INTR_MSPI_HALTED_MASK BIT(6)
-+#define INTR_MSPI_DONE_MASK BIT(5)
-+
-+#define MSPI_INTERRUPTS_ALL \
-+ (INTR_MSPI_DONE_MASK | \
-+ INTR_MSPI_HALTED_MASK)
-+
-+struct platform_device;
-+struct dev_pm_ops;
-+
-+struct bcm_qspi_soc_intc;
-+
-+/* Read controller register*/
-+static inline u32 bcm_qspi_readl(bool be, void __iomem *addr)
-+{
-+ if (be)
-+ return ioread32be(addr);
-+ else
-+ return readl_relaxed(addr);
-+}
-+
-+/* Write controller register*/
-+static inline void bcm_qspi_writel(bool be,
-+ unsigned int data, void __iomem *addr)
-+{
-+ if (be)
-+ iowrite32be(data, addr);
-+ else
-+ writel_relaxed(data, addr);
-+}
-+
-+/* The common driver functions to be called by the SoC platform driver */
-+int bcm_qspi_probe(struct platform_device *pdev,
-+ struct bcm_qspi_soc_intc *soc_intc);
-+int bcm_qspi_remove(struct platform_device *pdev);
-+
-+/* pm_ops used by the SoC platform driver called on PM suspend/resume */
-+extern const struct dev_pm_ops bcm_qspi_pm_ops;
-+
-+#endif /* __SPI_BCM_QSPI_H__ */
diff --git a/target/linux/bcm53xx/patches-4.4/083-0002-spi-brcmstb-qspi-Broadcom-settop-platform-driver.patch b/target/linux/bcm53xx/patches-4.4/083-0002-spi-brcmstb-qspi-Broadcom-settop-platform-driver.patch
deleted file mode 100644
index 476b11cdc8..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0002-spi-brcmstb-qspi-Broadcom-settop-platform-driver.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 44f95d87a6187f5027568bbcdce491713d7de5e5 Mon Sep 17 00:00:00 2001
-From: Kamal Dasu <kdasu.kdev@gmail.com>
-Date: Wed, 24 Aug 2016 18:04:24 -0400
-Subject: [PATCH] spi: brcmstb-qspi: Broadcom settop platform driver
-
-Adding the settop SoC platfrom driver, this driver is compatible
-with the settop MSPI+BSPI and MSPI only blocks implemented on the
-SoCs. Driver calls the spi-bcm-qspi probe(), remove() and pm_ops.
-
-Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/Makefile | 2 +-
- drivers/spi/spi-brcmstb-qspi.c | 53 ++++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 54 insertions(+), 1 deletion(-)
- create mode 100644 drivers/spi/spi-brcmstb-qspi.c
-
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
- obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
- obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
- obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
--obj-$(CONFIG_SPI_BCM_QSPI) += spi-bcm-qspi.o
-+obj-$(CONFIG_SPI_BCM_QSPI) += spi-brcmstb-qspi.o spi-bcm-qspi.o
- obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
- obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
- obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
---- /dev/null
-+++ b/drivers/spi/spi-brcmstb-qspi.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Copyright 2016 Broadcom
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License, version 2, as
-+ * published by the Free Software Foundation (the "GPL").
-+ *
-+ * This program is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-+ * General Public License version 2 (GPLv2) for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * version 2 (GPLv2) along with this source code.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include "spi-bcm-qspi.h"
-+
-+static const struct of_device_id brcmstb_qspi_of_match[] = {
-+ { .compatible = "brcm,spi-brcmstb-qspi" },
-+ { .compatible = "brcm,spi-brcmstb-mspi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, brcmstb_qspi_of_match);
-+
-+static int brcmstb_qspi_probe(struct platform_device *pdev)
-+{
-+ return bcm_qspi_probe(pdev, NULL);
-+}
-+
-+static int brcmstb_qspi_remove(struct platform_device *pdev)
-+{
-+ return bcm_qspi_remove(pdev);
-+}
-+
-+static struct platform_driver brcmstb_qspi_driver = {
-+ .probe = brcmstb_qspi_probe,
-+ .remove = brcmstb_qspi_remove,
-+ .driver = {
-+ .name = "brcmstb_qspi",
-+ .pm = &bcm_qspi_pm_ops,
-+ .of_match_table = brcmstb_qspi_of_match,
-+ }
-+};
-+module_platform_driver(brcmstb_qspi_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Kamal Dasu");
-+MODULE_DESCRIPTION("Broadcom SPI driver for settop SoC");
diff --git a/target/linux/bcm53xx/patches-4.4/083-0003-spi-bcm-qspi-Add-BSPI-spi-nor-flash-controller-drive.patch b/target/linux/bcm53xx/patches-4.4/083-0003-spi-bcm-qspi-Add-BSPI-spi-nor-flash-controller-drive.patch
deleted file mode 100644
index f5f2ba0112..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0003-spi-bcm-qspi-Add-BSPI-spi-nor-flash-controller-drive.patch
+++ /dev/null
@@ -1,780 +0,0 @@
-From 4e3b2d236fe00f0e0b6c45dcb3cc7d84c2316424 Mon Sep 17 00:00:00 2001
-From: Kamal Dasu <kdasu.kdev@gmail.com>
-Date: Wed, 24 Aug 2016 18:04:25 -0400
-Subject: [PATCH] spi: bcm-qspi: Add BSPI spi-nor flash controller driver
-
-This change implements BSPI driver for Broadcom BRCMSTB, NS2,
-NSP SoCs works in combination with the MSPI controller driver
-and implements flash read acceleration and implements the
-spi_flash_read() method. Both MSPI and BSPI controllers are
-needed to access spi-nor flash.
-
-Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
-Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm-qspi.c | 603 ++++++++++++++++++++++++++++++++++++++++++++-
- drivers/spi/spi-bcm-qspi.h | 20 ++
- 2 files changed, 620 insertions(+), 3 deletions(-)
-
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -38,6 +38,60 @@
-
- #define DRIVER_NAME "bcm_qspi"
-
-+
-+/* BSPI register offsets */
-+#define BSPI_REVISION_ID 0x000
-+#define BSPI_SCRATCH 0x004
-+#define BSPI_MAST_N_BOOT_CTRL 0x008
-+#define BSPI_BUSY_STATUS 0x00c
-+#define BSPI_INTR_STATUS 0x010
-+#define BSPI_B0_STATUS 0x014
-+#define BSPI_B0_CTRL 0x018
-+#define BSPI_B1_STATUS 0x01c
-+#define BSPI_B1_CTRL 0x020
-+#define BSPI_STRAP_OVERRIDE_CTRL 0x024
-+#define BSPI_FLEX_MODE_ENABLE 0x028
-+#define BSPI_BITS_PER_CYCLE 0x02c
-+#define BSPI_BITS_PER_PHASE 0x030
-+#define BSPI_CMD_AND_MODE_BYTE 0x034
-+#define BSPI_BSPI_FLASH_UPPER_ADDR_BYTE 0x038
-+#define BSPI_BSPI_XOR_VALUE 0x03c
-+#define BSPI_BSPI_XOR_ENABLE 0x040
-+#define BSPI_BSPI_PIO_MODE_ENABLE 0x044
-+#define BSPI_BSPI_PIO_IODIR 0x048
-+#define BSPI_BSPI_PIO_DATA 0x04c
-+
-+/* RAF register offsets */
-+#define BSPI_RAF_START_ADDR 0x100
-+#define BSPI_RAF_NUM_WORDS 0x104
-+#define BSPI_RAF_CTRL 0x108
-+#define BSPI_RAF_FULLNESS 0x10c
-+#define BSPI_RAF_WATERMARK 0x110
-+#define BSPI_RAF_STATUS 0x114
-+#define BSPI_RAF_READ_DATA 0x118
-+#define BSPI_RAF_WORD_CNT 0x11c
-+#define BSPI_RAF_CURR_ADDR 0x120
-+
-+/* Override mode masks */
-+#define BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE BIT(0)
-+#define BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL BIT(1)
-+#define BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE BIT(2)
-+#define BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD BIT(3)
-+#define BSPI_STRAP_OVERRIDE_CTRL_ENDAIN_MODE BIT(4)
-+
-+#define BSPI_ADDRLEN_3BYTES 3
-+#define BSPI_ADDRLEN_4BYTES 4
-+
-+#define BSPI_RAF_STATUS_FIFO_EMPTY_MASK BIT(1)
-+
-+#define BSPI_RAF_CTRL_START_MASK BIT(0)
-+#define BSPI_RAF_CTRL_CLEAR_MASK BIT(1)
-+
-+#define BSPI_BPP_MODE_SELECT_MASK BIT(8)
-+#define BSPI_BPP_ADDR_SELECT_MASK BIT(16)
-+
-+#define BSPI_READ_LENGTH 256
-+
- /* MSPI register offsets */
- #define MSPI_SPCR0_LSB 0x000
- #define MSPI_SPCR0_MSB 0x004
-@@ -108,8 +162,16 @@ struct bcm_qspi_parms {
- u8 bits_per_word;
- };
-
-+struct bcm_xfer_mode {
-+ bool flex_mode;
-+ unsigned int width;
-+ unsigned int addrlen;
-+ unsigned int hp;
-+};
-+
- enum base_type {
- MSPI,
-+ BSPI,
- CHIP_SELECT,
- BASEMAX,
- };
-@@ -140,13 +202,28 @@ struct bcm_qspi {
- struct bcm_qspi_parms last_parms;
- struct qspi_trans trans_pos;
- int curr_cs;
-+ int bspi_maj_rev;
-+ int bspi_min_rev;
-+ int bspi_enabled;
-+ struct spi_flash_read_message *bspi_rf_msg;
-+ u32 bspi_rf_msg_idx;
-+ u32 bspi_rf_msg_len;
-+ u32 bspi_rf_msg_status;
-+ struct bcm_xfer_mode xfer_mode;
- u32 s3_strap_override_ctrl;
-+ bool bspi_mode;
- bool big_endian;
- int num_irqs;
- struct bcm_qspi_dev_id *dev_ids;
- struct completion mspi_done;
-+ struct completion bspi_done;
- };
-
-+static inline bool has_bspi(struct bcm_qspi *qspi)
-+{
-+ return qspi->bspi_mode;
-+}
-+
- /* Read qspi controller register*/
- static inline u32 bcm_qspi_read(struct bcm_qspi *qspi, enum base_type type,
- unsigned int offset)
-@@ -161,6 +238,300 @@ static inline void bcm_qspi_write(struct
- bcm_qspi_writel(qspi->big_endian, data, qspi->base[type] + offset);
- }
-
-+/* BSPI helpers */
-+static int bcm_qspi_bspi_busy_poll(struct bcm_qspi *qspi)
-+{
-+ int i;
-+
-+ /* this should normally finish within 10us */
-+ for (i = 0; i < 1000; i++) {
-+ if (!(bcm_qspi_read(qspi, BSPI, BSPI_BUSY_STATUS) & 1))
-+ return 0;
-+ udelay(1);
-+ }
-+ dev_warn(&qspi->pdev->dev, "timeout waiting for !busy_status\n");
-+ return -EIO;
-+}
-+
-+static inline bool bcm_qspi_bspi_ver_three(struct bcm_qspi *qspi)
-+{
-+ if (qspi->bspi_maj_rev < 4)
-+ return true;
-+ return false;
-+}
-+
-+static void bcm_qspi_bspi_flush_prefetch_buffers(struct bcm_qspi *qspi)
-+{
-+ bcm_qspi_bspi_busy_poll(qspi);
-+ /* Force rising edge for the b0/b1 'flush' field */
-+ bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 1);
-+ bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 1);
-+ bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
-+ bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
-+}
-+
-+static int bcm_qspi_bspi_lr_is_fifo_empty(struct bcm_qspi *qspi)
-+{
-+ return (bcm_qspi_read(qspi, BSPI, BSPI_RAF_STATUS) &
-+ BSPI_RAF_STATUS_FIFO_EMPTY_MASK);
-+}
-+
-+static inline u32 bcm_qspi_bspi_lr_read_fifo(struct bcm_qspi *qspi)
-+{
-+ u32 data = bcm_qspi_read(qspi, BSPI, BSPI_RAF_READ_DATA);
-+
-+ /* BSPI v3 LR is LE only, convert data to host endianness */
-+ if (bcm_qspi_bspi_ver_three(qspi))
-+ data = le32_to_cpu(data);
-+
-+ return data;
-+}
-+
-+static inline void bcm_qspi_bspi_lr_start(struct bcm_qspi *qspi)
-+{
-+ bcm_qspi_bspi_busy_poll(qspi);
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
-+ BSPI_RAF_CTRL_START_MASK);
-+}
-+
-+static inline void bcm_qspi_bspi_lr_clear(struct bcm_qspi *qspi)
-+{
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_CTRL,
-+ BSPI_RAF_CTRL_CLEAR_MASK);
-+ bcm_qspi_bspi_flush_prefetch_buffers(qspi);
-+}
-+
-+static void bcm_qspi_bspi_lr_data_read(struct bcm_qspi *qspi)
-+{
-+ u32 *buf = (u32 *)qspi->bspi_rf_msg->buf;
-+ u32 data = 0;
-+
-+ dev_dbg(&qspi->pdev->dev, "xfer %p rx %p rxlen %d\n", qspi->bspi_rf_msg,
-+ qspi->bspi_rf_msg->buf, qspi->bspi_rf_msg_len);
-+ while (!bcm_qspi_bspi_lr_is_fifo_empty(qspi)) {
-+ data = bcm_qspi_bspi_lr_read_fifo(qspi);
-+ if (likely(qspi->bspi_rf_msg_len >= 4) &&
-+ IS_ALIGNED((uintptr_t)buf, 4)) {
-+ buf[qspi->bspi_rf_msg_idx++] = data;
-+ qspi->bspi_rf_msg_len -= 4;
-+ } else {
-+ /* Read out remaining bytes, make sure*/
-+ u8 *cbuf = (u8 *)&buf[qspi->bspi_rf_msg_idx];
-+
-+ data = cpu_to_le32(data);
-+ while (qspi->bspi_rf_msg_len) {
-+ *cbuf++ = (u8)data;
-+ data >>= 8;
-+ qspi->bspi_rf_msg_len--;
-+ }
-+ }
-+ }
-+}
-+
-+static void bcm_qspi_bspi_set_xfer_params(struct bcm_qspi *qspi, u8 cmd_byte,
-+ int bpp, int bpc, int flex_mode)
-+{
-+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, 0);
-+ bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_CYCLE, bpc);
-+ bcm_qspi_write(qspi, BSPI, BSPI_BITS_PER_PHASE, bpp);
-+ bcm_qspi_write(qspi, BSPI, BSPI_CMD_AND_MODE_BYTE, cmd_byte);
-+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE, flex_mode);
-+}
-+
-+static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width,
-+ int addrlen, int hp)
-+{
-+ int bpc = 0, bpp = 0;
-+ u8 command = SPINOR_OP_READ_FAST;
-+ int flex_mode = 1, rv = 0;
-+ bool spans_4byte = false;
-+
-+ dev_dbg(&qspi->pdev->dev, "set flex mode w %x addrlen %x hp %d\n",
-+ width, addrlen, hp);
-+
-+ if (addrlen == BSPI_ADDRLEN_4BYTES) {
-+ bpp = BSPI_BPP_ADDR_SELECT_MASK;
-+ spans_4byte = true;
-+ }
-+
-+ bpp |= 8;
-+
-+ switch (width) {
-+ case SPI_NBITS_SINGLE:
-+ if (addrlen == BSPI_ADDRLEN_3BYTES)
-+ /* default mode, does not need flex_cmd */
-+ flex_mode = 0;
-+ else
-+ command = SPINOR_OP_READ4_FAST;
-+ break;
-+ case SPI_NBITS_DUAL:
-+ bpc = 0x00000001;
-+ if (hp) {
-+ bpc |= 0x00010100; /* address and mode are 2-bit */
-+ bpp = BSPI_BPP_MODE_SELECT_MASK;
-+ command = OPCODE_DIOR;
-+ if (spans_4byte)
-+ command = OPCODE_DIOR_4B;
-+ } else {
-+ command = SPINOR_OP_READ_1_1_2;
-+ if (spans_4byte)
-+ command = SPINOR_OP_READ4_1_1_2;
-+ }
-+ break;
-+ case SPI_NBITS_QUAD:
-+ bpc = 0x00000002;
-+ if (hp) {
-+ bpc |= 0x00020200; /* address and mode are 4-bit */
-+ bpp = 4; /* dummy cycles */
-+ bpp |= BSPI_BPP_ADDR_SELECT_MASK;
-+ command = OPCODE_QIOR;
-+ if (spans_4byte)
-+ command = OPCODE_QIOR_4B;
-+ } else {
-+ command = SPINOR_OP_READ_1_1_4;
-+ if (spans_4byte)
-+ command = SPINOR_OP_READ4_1_1_4;
-+ }
-+ break;
-+ default:
-+ rv = -EINVAL;
-+ break;
-+ }
-+
-+ if (rv == 0)
-+ bcm_qspi_bspi_set_xfer_params(qspi, command, bpp, bpc,
-+ flex_mode);
-+
-+ return rv;
-+}
-+
-+static int bcm_qspi_bspi_set_override(struct bcm_qspi *qspi, int width,
-+ int addrlen, int hp)
-+{
-+ u32 data = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
-+
-+ dev_dbg(&qspi->pdev->dev, "set override mode w %x addrlen %x hp %d\n",
-+ width, addrlen, hp);
-+
-+ switch (width) {
-+ case SPI_NBITS_SINGLE:
-+ /* clear quad/dual mode */
-+ data &= ~(BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD |
-+ BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL);
-+ break;
-+
-+ case SPI_NBITS_QUAD:
-+ /* clear dual mode and set quad mode */
-+ data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
-+ data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
-+ break;
-+ case SPI_NBITS_DUAL:
-+ /* clear quad mode set dual mode */
-+ data &= ~BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD;
-+ data |= BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (addrlen == BSPI_ADDRLEN_4BYTES)
-+ /* set 4byte mode*/
-+ data |= BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
-+ else
-+ /* clear 4 byte mode */
-+ data &= ~BSPI_STRAP_OVERRIDE_CTRL_ADDR_4BYTE;
-+
-+ /* set the override mode */
-+ data |= BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
-+ bcm_qspi_write(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL, data);
-+ bcm_qspi_bspi_set_xfer_params(qspi, SPINOR_OP_READ_FAST, 0, 0, 0);
-+
-+ return 0;
-+}
-+
-+static int bcm_qspi_bspi_set_mode(struct bcm_qspi *qspi,
-+ int width, int addrlen, int hp)
-+{
-+ int error = 0;
-+
-+ /* default mode */
-+ qspi->xfer_mode.flex_mode = true;
-+
-+ if (!bcm_qspi_bspi_ver_three(qspi)) {
-+ u32 val, mask;
-+
-+ val = bcm_qspi_read(qspi, BSPI, BSPI_STRAP_OVERRIDE_CTRL);
-+ mask = BSPI_STRAP_OVERRIDE_CTRL_OVERRIDE;
-+ if (val & mask || qspi->s3_strap_override_ctrl & mask) {
-+ qspi->xfer_mode.flex_mode = false;
-+ bcm_qspi_write(qspi, BSPI, BSPI_FLEX_MODE_ENABLE,
-+ 0);
-+
-+ if ((val | qspi->s3_strap_override_ctrl) &
-+ BSPI_STRAP_OVERRIDE_CTRL_DATA_DUAL)
-+ width = SPI_NBITS_DUAL;
-+ else if ((val | qspi->s3_strap_override_ctrl) &
-+ BSPI_STRAP_OVERRIDE_CTRL_DATA_QUAD)
-+ width = SPI_NBITS_QUAD;
-+
-+ error = bcm_qspi_bspi_set_override(qspi, width, addrlen,
-+ hp);
-+ }
-+ }
-+
-+ if (qspi->xfer_mode.flex_mode)
-+ error = bcm_qspi_bspi_set_flex_mode(qspi, width, addrlen, hp);
-+
-+ if (error) {
-+ dev_warn(&qspi->pdev->dev,
-+ "INVALID COMBINATION: width=%d addrlen=%d hp=%d\n",
-+ width, addrlen, hp);
-+ } else if (qspi->xfer_mode.width != width ||
-+ qspi->xfer_mode.addrlen != addrlen ||
-+ qspi->xfer_mode.hp != hp) {
-+ qspi->xfer_mode.width = width;
-+ qspi->xfer_mode.addrlen = addrlen;
-+ qspi->xfer_mode.hp = hp;
-+ dev_dbg(&qspi->pdev->dev,
-+ "cs:%d %d-lane output, %d-byte address%s\n",
-+ qspi->curr_cs,
-+ qspi->xfer_mode.width,
-+ qspi->xfer_mode.addrlen,
-+ qspi->xfer_mode.hp != -1 ? ", hp mode" : "");
-+ }
-+
-+ return error;
-+}
-+
-+static void bcm_qspi_enable_bspi(struct bcm_qspi *qspi)
-+{
-+ if (!has_bspi(qspi) || (qspi->bspi_enabled))
-+ return;
-+
-+ qspi->bspi_enabled = 1;
-+ if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1) == 0)
-+ return;
-+
-+ bcm_qspi_bspi_flush_prefetch_buffers(qspi);
-+ udelay(1);
-+ bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 0);
-+ udelay(1);
-+}
-+
-+static void bcm_qspi_disable_bspi(struct bcm_qspi *qspi)
-+{
-+ if (!has_bspi(qspi) || (!qspi->bspi_enabled))
-+ return;
-+
-+ qspi->bspi_enabled = 0;
-+ if ((bcm_qspi_read(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL) & 1))
-+ return;
-+
-+ bcm_qspi_bspi_busy_poll(qspi);
-+ bcm_qspi_write(qspi, BSPI, BSPI_MAST_N_BOOT_CTRL, 1);
-+ udelay(1);
-+}
-+
- static void bcm_qspi_chip_select(struct bcm_qspi *qspi, int cs)
- {
- u32 data = 0;
-@@ -298,6 +669,8 @@ static void read_from_hw(struct bcm_qspi
- struct qspi_trans tp;
- int slot;
-
-+ bcm_qspi_disable_bspi(qspi);
-+
- if (slots > MSPI_NUM_CDRAM) {
- /* should never happen */
- dev_err(&qspi->pdev->dev, "%s: too many slots!\n", __func__);
-@@ -368,6 +741,7 @@ static int write_to_hw(struct bcm_qspi *
- int slot = 0, tstatus = 0;
- u32 mspi_cdram = 0;
-
-+ bcm_qspi_disable_bspi(qspi);
- tp = qspi->trans_pos;
- bcm_qspi_update_parms(qspi, spi, tp.trans);
-
-@@ -414,6 +788,9 @@ static int write_to_hw(struct bcm_qspi *
- write_cdram_slot(qspi, slot - 1, mspi_cdram);
- }
-
-+ if (has_bspi(qspi))
-+ bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 1);
-+
- /* Must flush previous writes before starting MSPI operation */
- mb();
- /* Set cont | spe | spifie */
-@@ -423,6 +800,118 @@ done:
- return slot;
- }
-
-+static int bcm_qspi_bspi_flash_read(struct spi_device *spi,
-+ struct spi_flash_read_message *msg)
-+{
-+ struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
-+ u32 addr = 0, len, len_words;
-+ int ret = 0;
-+ unsigned long timeo = msecs_to_jiffies(100);
-+
-+ if (bcm_qspi_bspi_ver_three(qspi))
-+ if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
-+ return -EIO;
-+
-+ bcm_qspi_chip_select(qspi, spi->chip_select);
-+ bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
-+
-+ /*
-+ * when using flex mode mode we need to send
-+ * the upper address byte to bspi
-+ */
-+ if (bcm_qspi_bspi_ver_three(qspi) == false) {
-+ addr = msg->from & 0xff000000;
-+ bcm_qspi_write(qspi, BSPI,
-+ BSPI_BSPI_FLASH_UPPER_ADDR_BYTE, addr);
-+ }
-+
-+ if (!qspi->xfer_mode.flex_mode)
-+ addr = msg->from;
-+ else
-+ addr = msg->from & 0x00ffffff;
-+
-+ /* set BSPI RAF buffer max read length */
-+ len = msg->len;
-+ if (len > BSPI_READ_LENGTH)
-+ len = BSPI_READ_LENGTH;
-+
-+ if (bcm_qspi_bspi_ver_three(qspi) == true)
-+ addr = (addr + 0xc00000) & 0xffffff;
-+
-+ reinit_completion(&qspi->bspi_done);
-+ bcm_qspi_enable_bspi(qspi);
-+ len_words = (len + 3) >> 2;
-+ qspi->bspi_rf_msg = msg;
-+ qspi->bspi_rf_msg_status = 0;
-+ qspi->bspi_rf_msg_idx = 0;
-+ qspi->bspi_rf_msg_len = len;
-+ dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len);
-+
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr);
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
-+ bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
-+
-+ /* Must flush previous writes before starting BSPI operation */
-+ mb();
-+
-+ bcm_qspi_bspi_lr_start(qspi);
-+ if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) {
-+ dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n");
-+ ret = -ETIMEDOUT;
-+ } else {
-+ /* set the return length for the caller */
-+ msg->retlen = len;
-+ }
-+
-+ return ret;
-+}
-+
-+static int bcm_qspi_flash_read(struct spi_device *spi,
-+ struct spi_flash_read_message *msg)
-+{
-+ struct bcm_qspi *qspi = spi_master_get_devdata(spi->master);
-+ int ret = 0;
-+ bool mspi_read = false;
-+ u32 io_width, addrlen, addr, len;
-+ u_char *buf;
-+
-+ buf = msg->buf;
-+ addr = msg->from;
-+ len = msg->len;
-+
-+ if (bcm_qspi_bspi_ver_three(qspi) == true) {
-+ /*
-+ * The address coming into this function is a raw flash offset.
-+ * But for BSPI <= V3, we need to convert it to a remapped BSPI
-+ * address. If it crosses a 4MB boundary, just revert back to
-+ * using MSPI.
-+ */
-+ addr = (addr + 0xc00000) & 0xffffff;
-+
-+ if ((~ADDR_4MB_MASK & addr) ^
-+ (~ADDR_4MB_MASK & (addr + len - 1)))
-+ mspi_read = true;
-+ }
-+
-+ /* non-aligned and very short transfers are handled by MSPI */
-+ if (!IS_ALIGNED((uintptr_t)addr, 4) || !IS_ALIGNED((uintptr_t)buf, 4) ||
-+ len < 4)
-+ mspi_read = true;
-+
-+ if (mspi_read)
-+ /* this will make the m25p80 read to fallback to mspi read */
-+ return -EAGAIN;
-+
-+ io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE;
-+ addrlen = msg->addr_width;
-+ ret = bcm_qspi_bspi_set_mode(qspi, io_width, addrlen, -1);
-+
-+ if (!ret)
-+ ret = bcm_qspi_bspi_flash_read(spi, msg);
-+
-+ return ret;
-+}
-+
- static int bcm_qspi_transfer_one(struct spi_master *master,
- struct spi_device *spi,
- struct spi_transfer *trans)
-@@ -469,13 +958,76 @@ static irqreturn_t bcm_qspi_mspi_l2_isr(
- bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
- complete(&qspi->mspi_done);
- return IRQ_HANDLED;
-- } else {
-- return IRQ_NONE;
- }
-+
-+ return IRQ_NONE;
-+}
-+
-+static irqreturn_t bcm_qspi_bspi_lr_l2_isr(int irq, void *dev_id)
-+{
-+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
-+ struct bcm_qspi *qspi = qspi_dev_id->dev;
-+ u32 status;
-+
-+ if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
-+ bcm_qspi_bspi_lr_data_read(qspi);
-+ if (qspi->bspi_rf_msg_len == 0) {
-+ qspi->bspi_rf_msg = NULL;
-+ if (qspi->bspi_rf_msg_status)
-+ bcm_qspi_bspi_lr_clear(qspi);
-+ else
-+ bcm_qspi_bspi_flush_prefetch_buffers(qspi);
-+ }
-+ }
-+
-+ status = (qspi_dev_id->irqp->mask & INTR_BSPI_LR_SESSION_DONE_MASK);
-+ if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
-+ complete(&qspi->bspi_done);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static irqreturn_t bcm_qspi_bspi_lr_err_l2_isr(int irq, void *dev_id)
-+{
-+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
-+ struct bcm_qspi *qspi = qspi_dev_id->dev;
-+
-+ dev_err(&qspi->pdev->dev, "BSPI INT error\n");
-+ qspi->bspi_rf_msg_status = -EIO;
-+ complete(&qspi->bspi_done);
-+ return IRQ_HANDLED;
- }
-
- static const struct bcm_qspi_irq qspi_irq_tab[] = {
- {
-+ .irq_name = "spi_lr_fullness_reached",
-+ .irq_handler = bcm_qspi_bspi_lr_l2_isr,
-+ .mask = INTR_BSPI_LR_FULLNESS_REACHED_MASK,
-+ },
-+ {
-+ .irq_name = "spi_lr_session_aborted",
-+ .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
-+ .mask = INTR_BSPI_LR_SESSION_ABORTED_MASK,
-+ },
-+ {
-+ .irq_name = "spi_lr_impatient",
-+ .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
-+ .mask = INTR_BSPI_LR_IMPATIENT_MASK,
-+ },
-+ {
-+ .irq_name = "spi_lr_session_done",
-+ .irq_handler = bcm_qspi_bspi_lr_l2_isr,
-+ .mask = INTR_BSPI_LR_SESSION_DONE_MASK,
-+ },
-+#ifdef QSPI_INT_DEBUG
-+ /* this interrupt is for debug purposes only, dont request irq */
-+ {
-+ .irq_name = "spi_lr_overread",
-+ .irq_handler = bcm_qspi_bspi_lr_err_l2_isr,
-+ .mask = INTR_BSPI_LR_OVERREAD_MASK,
-+ },
-+#endif
-+ {
- .irq_name = "mspi_done",
- .irq_handler = bcm_qspi_mspi_l2_isr,
- .mask = INTR_MSPI_DONE_MASK,
-@@ -487,6 +1039,24 @@ static const struct bcm_qspi_irq qspi_ir
- },
- };
-
-+static void bcm_qspi_bspi_init(struct bcm_qspi *qspi)
-+{
-+ u32 val = 0;
-+
-+ val = bcm_qspi_read(qspi, BSPI, BSPI_REVISION_ID);
-+ qspi->bspi_maj_rev = (val >> 8) & 0xff;
-+ qspi->bspi_min_rev = val & 0xff;
-+ if (!(bcm_qspi_bspi_ver_three(qspi))) {
-+ /* Force mapping of BSPI address -> flash offset */
-+ bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_VALUE, 0);
-+ bcm_qspi_write(qspi, BSPI, BSPI_BSPI_XOR_ENABLE, 1);
-+ }
-+ qspi->bspi_enabled = 1;
-+ bcm_qspi_disable_bspi(qspi);
-+ bcm_qspi_write(qspi, BSPI, BSPI_B0_CTRL, 0);
-+ bcm_qspi_write(qspi, BSPI, BSPI_B1_CTRL, 0);
-+}
-+
- static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
- {
- struct bcm_qspi_parms parms;
-@@ -501,11 +1071,17 @@ static void bcm_qspi_hw_init(struct bcm_
- parms.bits_per_word = 8;
- parms.speed_hz = qspi->max_speed_hz;
- bcm_qspi_hw_set_parms(qspi, &parms);
-+
-+ if (has_bspi(qspi))
-+ bcm_qspi_bspi_init(qspi);
- }
-
- static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
- {
- bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
-+ if (has_bspi(qspi))
-+ bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
-+
- }
-
- static const struct of_device_id bcm_qspi_of_match[] = {
-@@ -515,7 +1091,7 @@ static const struct of_device_id bcm_qsp
- MODULE_DEVICE_TABLE(of, bcm_qspi_of_match);
-
- int bcm_qspi_probe(struct platform_device *pdev,
-- struct bcm_qspi_soc_intc *soc)
-+ struct bcm_qspi_soc_intc *soc_intc)
- {
- struct device *dev = &pdev->dev;
- struct bcm_qspi *qspi;
-@@ -549,6 +1125,7 @@ int bcm_qspi_probe(struct platform_devic
- master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_RX_DUAL | SPI_RX_QUAD;
- master->setup = bcm_qspi_setup;
- master->transfer_one = bcm_qspi_transfer_one;
-+ master->spi_flash_read = bcm_qspi_flash_read;
- master->cleanup = bcm_qspi_cleanup;
- master->dev.of_node = dev->of_node;
- master->num_chipselect = NUM_CHIPSELECT;
-@@ -573,6 +1150,20 @@ int bcm_qspi_probe(struct platform_devic
- goto qspi_probe_err;
- }
-
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "bspi");
-+ if (res) {
-+ qspi->base[BSPI] = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(qspi->base[BSPI])) {
-+ ret = PTR_ERR(qspi->base[BSPI]);
-+ goto qspi_probe_err;
-+ }
-+ qspi->bspi_mode = true;
-+ } else {
-+ qspi->bspi_mode = false;
-+ }
-+
-+ dev_info(dev, "using %smspi mode\n", qspi->bspi_mode ? "bspi-" : "");
-+
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cs_reg");
- if (res) {
- qspi->base[CHIP_SELECT] = devm_ioremap_resource(dev, res);
-@@ -635,9 +1226,15 @@ int bcm_qspi_probe(struct platform_devic
-
- bcm_qspi_hw_init(qspi);
- init_completion(&qspi->mspi_done);
-+ init_completion(&qspi->bspi_done);
- qspi->curr_cs = -1;
-
- platform_set_drvdata(pdev, qspi);
-+
-+ qspi->xfer_mode.width = -1;
-+ qspi->xfer_mode.addrlen = -1;
-+ qspi->xfer_mode.hp = -1;
-+
- ret = devm_spi_register_master(&pdev->dev, master);
- if (ret < 0) {
- dev_err(dev, "can't register master\n");
---- a/drivers/spi/spi-bcm-qspi.h
-+++ b/drivers/spi/spi-bcm-qspi.h
-@@ -20,6 +20,26 @@
- #include <linux/types.h>
- #include <linux/io.h>
-
-+/* BSPI interrupt masks */
-+#define INTR_BSPI_LR_OVERREAD_MASK BIT(4)
-+#define INTR_BSPI_LR_SESSION_DONE_MASK BIT(3)
-+#define INTR_BSPI_LR_IMPATIENT_MASK BIT(2)
-+#define INTR_BSPI_LR_SESSION_ABORTED_MASK BIT(1)
-+#define INTR_BSPI_LR_FULLNESS_REACHED_MASK BIT(0)
-+
-+#define BSPI_LR_INTERRUPTS_DATA \
-+ (INTR_BSPI_LR_SESSION_DONE_MASK | \
-+ INTR_BSPI_LR_FULLNESS_REACHED_MASK)
-+
-+#define BSPI_LR_INTERRUPTS_ERROR \
-+ (INTR_BSPI_LR_OVERREAD_MASK | \
-+ INTR_BSPI_LR_IMPATIENT_MASK | \
-+ INTR_BSPI_LR_SESSION_ABORTED_MASK)
-+
-+#define BSPI_LR_INTERRUPTS_ALL \
-+ (BSPI_LR_INTERRUPTS_ERROR | \
-+ BSPI_LR_INTERRUPTS_DATA)
-+
- /* MSPI Interrupt masks */
- #define INTR_MSPI_HALTED_MASK BIT(6)
- #define INTR_MSPI_DONE_MASK BIT(5)
diff --git a/target/linux/bcm53xx/patches-4.4/083-0004-spi-bcm-qspi-don-t-include-linux-mtd-cfi.h.patch b/target/linux/bcm53xx/patches-4.4/083-0004-spi-bcm-qspi-don-t-include-linux-mtd-cfi.h.patch
deleted file mode 100644
index f90c02bba0..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0004-spi-bcm-qspi-don-t-include-linux-mtd-cfi.h.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From c0a75d072a501effd66d3392ada8d3f4283b87ef Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Thu, 15 Sep 2016 17:40:15 +0200
-Subject: [PATCH] spi: bcm-qspi: don't include linux/mtd/cfi.h
-
-The header isn't actually needed here, but including it leads
-to a build warning when CONFIG_MTD is disabled:
-
-include/linux/mtd/cfi.h:76:2: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp]
-
-Fixes: fa236a7ef240 (spi: bcm-qspi: Add Broadcom MSPI driver)
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm-qspi.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -25,7 +25,6 @@
- #include <linux/ioport.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
--#include <linux/mtd/cfi.h>
- #include <linux/mtd/spi-nor.h>
- #include <linux/of.h>
- #include <linux/of_irq.h>
diff --git a/target/linux/bcm53xx/patches-4.4/083-0005-spi-bcm-qspi-fix-suspend-resume-ifdef.patch b/target/linux/bcm53xx/patches-4.4/083-0005-spi-bcm-qspi-fix-suspend-resume-ifdef.patch
deleted file mode 100644
index aad22d2ee8..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0005-spi-bcm-qspi-fix-suspend-resume-ifdef.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From a0319f8b12c0fb9800da61f4cba9bd6fd80e37a4 Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Thu, 15 Sep 2016 17:46:53 +0200
-Subject: [PATCH] spi: bcm-qspi: fix suspend/resume #ifdef
-
-The two power management functions are define inside of an #ifdef
-but referenced unconditionally, which is obviously broken when
-CONFIG_PM_SLEEP is not set:
-
-drivers/spi/spi-bcm-qspi.c:1300:13: error: 'bcm_qspi_suspend' undeclared here (not in a function)
-drivers/spi/spi-bcm-qspi.c:1301:13: error: 'bcm_qspi_resume' undeclared here (not in a function)
-
-This replaces the #ifdef with a __maybe_unused annotation that lets
-the compiler figure out whether to drop the functions itself,
-and uses SIMPLE_DEV_PM_OPS() to refer to the functions.
-
-This will also fill the freeze/thaw/poweroff/restore callback
-pointers in addition to suspend/resume, but as far as I can tell,
-this is what we want.
-
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm-qspi.c | 12 ++++--------
- 1 file changed, 4 insertions(+), 8 deletions(-)
-
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -1268,8 +1268,7 @@ int bcm_qspi_remove(struct platform_devi
- /* function to be called by SoC specific platform driver remove() */
- EXPORT_SYMBOL_GPL(bcm_qspi_remove);
-
--#ifdef CONFIG_PM_SLEEP
--static int bcm_qspi_suspend(struct device *dev)
-+static int __maybe_unused bcm_qspi_suspend(struct device *dev)
- {
- struct bcm_qspi *qspi = dev_get_drvdata(dev);
-
-@@ -1280,7 +1279,7 @@ static int bcm_qspi_suspend(struct devic
- return 0;
- };
-
--static int bcm_qspi_resume(struct device *dev)
-+static int __maybe_unused bcm_qspi_resume(struct device *dev)
- {
- struct bcm_qspi *qspi = dev_get_drvdata(dev);
- int ret = 0;
-@@ -1293,12 +1292,9 @@ static int bcm_qspi_resume(struct device
-
- return ret;
- }
--#endif /* CONFIG_PM_SLEEP */
-
--const struct dev_pm_ops bcm_qspi_pm_ops = {
-- .suspend = bcm_qspi_suspend,
-- .resume = bcm_qspi_resume,
--};
-+SIMPLE_DEV_PM_OPS(bcm_qspi_pm_ops, bcm_qspi_suspend, bcm_qspi_resume);
-+
- /* pm_ops to be called by SoC specific platform driver */
- EXPORT_SYMBOL_GPL(bcm_qspi_pm_ops);
-
diff --git a/target/linux/bcm53xx/patches-4.4/083-0006-spi-bcm-qspi-Fix-return-value-check-in-bcm_qspi_prob.patch b/target/linux/bcm53xx/patches-4.4/083-0006-spi-bcm-qspi-Fix-return-value-check-in-bcm_qspi_prob.patch
deleted file mode 100644
index d71b2f4599..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0006-spi-bcm-qspi-Fix-return-value-check-in-bcm_qspi_prob.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 3bf3eb2b95aaf18eff3080444b24673cda8ff9a2 Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Fri, 16 Sep 2016 13:45:17 +0000
-Subject: [PATCH] spi: bcm-qspi: Fix return value check in bcm_qspi_probe()
-
-In case of error, the function kcalloc() returns NULL pointer
-not ERR_PTR(). The IS_ERR() test in the return value check
-should be replaced with NULL test.
-
-Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm-qspi.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -1174,8 +1174,8 @@ int bcm_qspi_probe(struct platform_devic
-
- qspi->dev_ids = kcalloc(num_irqs, sizeof(struct bcm_qspi_dev_id),
- GFP_KERNEL);
-- if (IS_ERR(qspi->dev_ids)) {
-- ret = PTR_ERR(qspi->dev_ids);
-+ if (!qspi->dev_ids) {
-+ ret = -ENOMEM;
- goto qspi_probe_err;
- }
-
diff --git a/target/linux/bcm53xx/patches-4.4/083-0007-spi-bcm-qspi-Fix-error-return-code-in-bcm_qspi_probe.patch b/target/linux/bcm53xx/patches-4.4/083-0007-spi-bcm-qspi-Fix-error-return-code-in-bcm_qspi_probe.patch
deleted file mode 100644
index a15deb5749..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0007-spi-bcm-qspi-Fix-error-return-code-in-bcm_qspi_probe.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 71b8f350a4f03730f3024bfa7dc2414904a21bcb Mon Sep 17 00:00:00 2001
-From: Wei Yongjun <weiyongjun1@huawei.com>
-Date: Fri, 16 Sep 2016 14:00:19 +0000
-Subject: [PATCH] spi: bcm-qspi: Fix error return code in bcm_qspi_probe()
-
-Fix to return a negative error code from the error handling
-case instead of 0, as done elsewhere in this function.
-
-Fixes: fa236a7ef240 ("spi: bcm-qspi: Add Broadcom MSPI driver")
-Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm-qspi.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -1205,12 +1205,14 @@ int bcm_qspi_probe(struct platform_devic
-
- if (!num_ints) {
- dev_err(&pdev->dev, "no IRQs registered, cannot init driver\n");
-+ ret = -EINVAL;
- goto qspi_probe_err;
- }
-
- qspi->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(qspi->clk)) {
- dev_warn(dev, "unable to get clock\n");
-+ ret = PTR_ERR(qspi->clk);
- goto qspi_probe_err;
- }
-
diff --git a/target/linux/bcm53xx/patches-4.4/083-0008-spi-iproc-qspi-Add-Broadcom-iProc-SoCs-support.patch b/target/linux/bcm53xx/patches-4.4/083-0008-spi-iproc-qspi-Add-Broadcom-iProc-SoCs-support.patch
deleted file mode 100644
index 836d629c15..0000000000
--- a/target/linux/bcm53xx/patches-4.4/083-0008-spi-iproc-qspi-Add-Broadcom-iProc-SoCs-support.patch
+++ /dev/null
@@ -1,452 +0,0 @@
-From cc20a38612dbc87dc7396affc9758e3bfbe92340 Mon Sep 17 00:00:00 2001
-From: Kamal Dasu <kdasu.kdev@gmail.com>
-Date: Wed, 24 Aug 2016 18:04:29 -0400
-Subject: [PATCH] spi: iproc-qspi: Add Broadcom iProc SoCs support
-
-This spi driver uses the common spi-bcm-qspi driver and implements iProc
-SoCs specific interrupt controller. The common driver now calls the SoC
-handlers when present. Adding support for both muxed l1 and unmuxed interrupt
-sources.
-
-Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
-Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/Makefile | 2 +-
- drivers/spi/spi-bcm-qspi.c | 97 ++++++++++++++++++++++++-
- drivers/spi/spi-bcm-qspi.h | 34 ++++++++-
- drivers/spi/spi-iproc-qspi.c | 163 +++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 291 insertions(+), 5 deletions(-)
- create mode 100644 drivers/spi/spi-iproc-qspi.c
-
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -19,7 +19,7 @@ obj-$(CONFIG_SPI_BCM2835AUX) += spi-bcm
- obj-$(CONFIG_SPI_BCM53XX) += spi-bcm53xx.o
- obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
- obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
--obj-$(CONFIG_SPI_BCM_QSPI) += spi-brcmstb-qspi.o spi-bcm-qspi.o
-+obj-$(CONFIG_SPI_BCM_QSPI) += spi-iproc-qspi.o spi-brcmstb-qspi.o spi-bcm-qspi.o
- obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o
- obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
- obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
---- a/drivers/spi/spi-bcm-qspi.c
-+++ b/drivers/spi/spi-bcm-qspi.c
-@@ -175,9 +175,15 @@ enum base_type {
- BASEMAX,
- };
-
-+enum irq_source {
-+ SINGLE_L2,
-+ MUXED_L1,
-+};
-+
- struct bcm_qspi_irq {
- const char *irq_name;
- const irq_handler_t irq_handler;
-+ int irq_source;
- u32 mask;
- };
-
-@@ -198,6 +204,10 @@ struct bcm_qspi {
- u32 base_clk;
- u32 max_speed_hz;
- void __iomem *base[BASEMAX];
-+
-+ /* Some SoCs provide custom interrupt status register(s) */
-+ struct bcm_qspi_soc_intc *soc_intc;
-+
- struct bcm_qspi_parms last_parms;
- struct qspi_trans trans_pos;
- int curr_cs;
-@@ -806,6 +816,7 @@ static int bcm_qspi_bspi_flash_read(stru
- u32 addr = 0, len, len_words;
- int ret = 0;
- unsigned long timeo = msecs_to_jiffies(100);
-+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
-
- if (bcm_qspi_bspi_ver_three(qspi))
- if (msg->addr_width == BSPI_ADDRLEN_4BYTES)
-@@ -850,6 +861,15 @@ static int bcm_qspi_bspi_flash_read(stru
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words);
- bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0);
-
-+ if (qspi->soc_intc) {
-+ /*
-+ * clear soc MSPI and BSPI interrupts and enable
-+ * BSPI interrupts.
-+ */
-+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
-+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true);
-+ }
-+
- /* Must flush previous writes before starting BSPI operation */
- mb();
-
-@@ -952,9 +972,12 @@ static irqreturn_t bcm_qspi_mspi_l2_isr(
- u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
-
- if (status & MSPI_MSPI_STATUS_SPIF) {
-+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
- /* clear interrupt */
- status &= ~MSPI_MSPI_STATUS_SPIF;
- bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status);
-+ if (qspi->soc_intc)
-+ soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_DONE);
- complete(&qspi->mspi_done);
- return IRQ_HANDLED;
- }
-@@ -966,20 +989,33 @@ static irqreturn_t bcm_qspi_bspi_lr_l2_i
- {
- struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
- struct bcm_qspi *qspi = qspi_dev_id->dev;
-- u32 status;
-+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
-+ u32 status = qspi_dev_id->irqp->mask;
-
- if (qspi->bspi_enabled && qspi->bspi_rf_msg) {
- bcm_qspi_bspi_lr_data_read(qspi);
- if (qspi->bspi_rf_msg_len == 0) {
- qspi->bspi_rf_msg = NULL;
-+ if (qspi->soc_intc) {
-+ /* disable soc BSPI interrupt */
-+ soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE,
-+ false);
-+ /* indicate done */
-+ status = INTR_BSPI_LR_SESSION_DONE_MASK;
-+ }
-+
- if (qspi->bspi_rf_msg_status)
- bcm_qspi_bspi_lr_clear(qspi);
- else
- bcm_qspi_bspi_flush_prefetch_buffers(qspi);
- }
-+
-+ if (qspi->soc_intc)
-+ /* clear soc BSPI interrupt */
-+ soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_DONE);
- }
-
-- status = (qspi_dev_id->irqp->mask & INTR_BSPI_LR_SESSION_DONE_MASK);
-+ status &= INTR_BSPI_LR_SESSION_DONE_MASK;
- if (qspi->bspi_enabled && status && qspi->bspi_rf_msg_len == 0)
- complete(&qspi->bspi_done);
-
-@@ -990,13 +1026,39 @@ static irqreturn_t bcm_qspi_bspi_lr_err_
- {
- struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
- struct bcm_qspi *qspi = qspi_dev_id->dev;
-+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
-
- dev_err(&qspi->pdev->dev, "BSPI INT error\n");
- qspi->bspi_rf_msg_status = -EIO;
-+ if (qspi->soc_intc)
-+ /* clear soc interrupt */
-+ soc_intc->bcm_qspi_int_ack(soc_intc, BSPI_ERR);
-+
- complete(&qspi->bspi_done);
- return IRQ_HANDLED;
- }
-
-+static irqreturn_t bcm_qspi_l1_isr(int irq, void *dev_id)
-+{
-+ struct bcm_qspi_dev_id *qspi_dev_id = dev_id;
-+ struct bcm_qspi *qspi = qspi_dev_id->dev;
-+ struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc;
-+ irqreturn_t ret = IRQ_NONE;
-+
-+ if (soc_intc) {
-+ u32 status = soc_intc->bcm_qspi_get_int_status(soc_intc);
-+
-+ if (status & MSPI_DONE)
-+ ret = bcm_qspi_mspi_l2_isr(irq, dev_id);
-+ else if (status & BSPI_DONE)
-+ ret = bcm_qspi_bspi_lr_l2_isr(irq, dev_id);
-+ else if (status & BSPI_ERR)
-+ ret = bcm_qspi_bspi_lr_err_l2_isr(irq, dev_id);
-+ }
-+
-+ return ret;
-+}
-+
- static const struct bcm_qspi_irq qspi_irq_tab[] = {
- {
- .irq_name = "spi_lr_fullness_reached",
-@@ -1036,6 +1098,13 @@ static const struct bcm_qspi_irq qspi_ir
- .irq_handler = bcm_qspi_mspi_l2_isr,
- .mask = INTR_MSPI_HALTED_MASK,
- },
-+ {
-+ /* single muxed L1 interrupt source */
-+ .irq_name = "spi_l1_intr",
-+ .irq_handler = bcm_qspi_l1_isr,
-+ .irq_source = MUXED_L1,
-+ .mask = QSPI_INTERRUPTS_ALL,
-+ },
- };
-
- static void bcm_qspi_bspi_init(struct bcm_qspi *qspi)
-@@ -1182,7 +1251,13 @@ int bcm_qspi_probe(struct platform_devic
- for (val = 0; val < num_irqs; val++) {
- irq = -1;
- name = qspi_irq_tab[val].irq_name;
-- irq = platform_get_irq_byname(pdev, name);
-+ if (qspi_irq_tab[val].irq_source == SINGLE_L2) {
-+ /* get the l2 interrupts */
-+ irq = platform_get_irq_byname(pdev, name);
-+ } else if (!num_ints && soc_intc) {
-+ /* all mspi, bspi intrs muxed to one L1 intr */
-+ irq = platform_get_irq(pdev, 0);
-+ }
-
- if (irq >= 0) {
- ret = devm_request_irq(&pdev->dev, irq,
-@@ -1209,6 +1284,17 @@ int bcm_qspi_probe(struct platform_devic
- goto qspi_probe_err;
- }
-
-+ /*
-+ * Some SoCs integrate spi controller (e.g., its interrupt bits)
-+ * in specific ways
-+ */
-+ if (soc_intc) {
-+ qspi->soc_intc = soc_intc;
-+ soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
-+ } else {
-+ qspi->soc_intc = NULL;
-+ }
-+
- qspi->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(qspi->clk)) {
- dev_warn(dev, "unable to get clock\n");
-@@ -1288,6 +1374,11 @@ static int __maybe_unused bcm_qspi_resum
-
- bcm_qspi_hw_init(qspi);
- bcm_qspi_chip_select(qspi, qspi->curr_cs);
-+ if (qspi->soc_intc)
-+ /* enable MSPI interrupt */
-+ qspi->soc_intc->bcm_qspi_int_set(qspi->soc_intc, MSPI_DONE,
-+ true);
-+
- ret = clk_enable(qspi->clk);
- if (!ret)
- spi_master_resume(qspi->master);
---- a/drivers/spi/spi-bcm-qspi.h
-+++ b/drivers/spi/spi-bcm-qspi.h
-@@ -48,10 +48,26 @@
- (INTR_MSPI_DONE_MASK | \
- INTR_MSPI_HALTED_MASK)
-
-+#define QSPI_INTERRUPTS_ALL \
-+ (MSPI_INTERRUPTS_ALL | \
-+ BSPI_LR_INTERRUPTS_ALL)
-+
- struct platform_device;
- struct dev_pm_ops;
-
--struct bcm_qspi_soc_intc;
-+enum {
-+ MSPI_DONE = 0x1,
-+ BSPI_DONE = 0x2,
-+ BSPI_ERR = 0x4,
-+ MSPI_BSPI_DONE = 0x7
-+};
-+
-+struct bcm_qspi_soc_intc {
-+ void (*bcm_qspi_int_ack)(struct bcm_qspi_soc_intc *soc_intc, int type);
-+ void (*bcm_qspi_int_set)(struct bcm_qspi_soc_intc *soc_intc, int type,
-+ bool en);
-+ u32 (*bcm_qspi_get_int_status)(struct bcm_qspi_soc_intc *soc_intc);
-+};
-
- /* Read controller register*/
- static inline u32 bcm_qspi_readl(bool be, void __iomem *addr)
-@@ -72,6 +88,22 @@ static inline void bcm_qspi_writel(bool
- writel_relaxed(data, addr);
- }
-
-+static inline u32 get_qspi_mask(int type)
-+{
-+ switch (type) {
-+ case MSPI_DONE:
-+ return INTR_MSPI_DONE_MASK;
-+ case BSPI_DONE:
-+ return BSPI_LR_INTERRUPTS_ALL;
-+ case MSPI_BSPI_DONE:
-+ return QSPI_INTERRUPTS_ALL;
-+ case BSPI_ERR:
-+ return BSPI_LR_INTERRUPTS_ERROR;
-+ }
-+
-+ return 0;
-+}
-+
- /* The common driver functions to be called by the SoC platform driver */
- int bcm_qspi_probe(struct platform_device *pdev,
- struct bcm_qspi_soc_intc *soc_intc);
---- /dev/null
-+++ b/drivers/spi/spi-iproc-qspi.c
-@@ -0,0 +1,163 @@
-+/*
-+ * Copyright 2016 Broadcom Limited
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/io.h>
-+#include <linux/ioport.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+
-+#include "spi-bcm-qspi.h"
-+
-+#define INTR_BASE_BIT_SHIFT 0x02
-+#define INTR_COUNT 0x07
-+
-+struct bcm_iproc_intc {
-+ struct bcm_qspi_soc_intc soc_intc;
-+ struct platform_device *pdev;
-+ void __iomem *int_reg;
-+ void __iomem *int_status_reg;
-+ spinlock_t soclock;
-+ bool big_endian;
-+};
-+
-+static u32 bcm_iproc_qspi_get_l2_int_status(struct bcm_qspi_soc_intc *soc_intc)
-+{
-+ struct bcm_iproc_intc *priv =
-+ container_of(soc_intc, struct bcm_iproc_intc, soc_intc);
-+ void __iomem *mmio = priv->int_status_reg;
-+ int i;
-+ u32 val = 0, sts = 0;
-+
-+ for (i = 0; i < INTR_COUNT; i++) {
-+ if (bcm_qspi_readl(priv->big_endian, mmio + (i * 4)))
-+ val |= 1UL << i;
-+ }
-+
-+ if (val & INTR_MSPI_DONE_MASK)
-+ sts |= MSPI_DONE;
-+
-+ if (val & BSPI_LR_INTERRUPTS_ALL)
-+ sts |= BSPI_DONE;
-+
-+ if (val & BSPI_LR_INTERRUPTS_ERROR)
-+ sts |= BSPI_ERR;
-+
-+ return sts;
-+}
-+
-+static void bcm_iproc_qspi_int_ack(struct bcm_qspi_soc_intc *soc_intc, int type)
-+{
-+ struct bcm_iproc_intc *priv =
-+ container_of(soc_intc, struct bcm_iproc_intc, soc_intc);
-+ void __iomem *mmio = priv->int_status_reg;
-+ u32 mask = get_qspi_mask(type);
-+ int i;
-+
-+ for (i = 0; i < INTR_COUNT; i++) {
-+ if (mask & (1UL << i))
-+ bcm_qspi_writel(priv->big_endian, 1, mmio + (i * 4));
-+ }
-+}
-+
-+static void bcm_iproc_qspi_int_set(struct bcm_qspi_soc_intc *soc_intc, int type,
-+ bool en)
-+{
-+ struct bcm_iproc_intc *priv =
-+ container_of(soc_intc, struct bcm_iproc_intc, soc_intc);
-+ void __iomem *mmio = priv->int_reg;
-+ u32 mask = get_qspi_mask(type);
-+ u32 val;
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&priv->soclock, flags);
-+
-+ val = bcm_qspi_readl(priv->big_endian, mmio);
-+
-+ if (en)
-+ val = val | (mask << INTR_BASE_BIT_SHIFT);
-+ else
-+ val = val & ~(mask << INTR_BASE_BIT_SHIFT);
-+
-+ bcm_qspi_writel(priv->big_endian, val, mmio);
-+
-+ spin_unlock_irqrestore(&priv->soclock, flags);
-+}
-+
-+static int bcm_iproc_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct bcm_iproc_intc *priv;
-+ struct bcm_qspi_soc_intc *soc_intc;
-+ struct resource *res;
-+
-+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+ soc_intc = &priv->soc_intc;
-+ priv->pdev = pdev;
-+
-+ spin_lock_init(&priv->soclock);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "intr_regs");
-+ priv->int_reg = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(priv->int_reg))
-+ return PTR_ERR(priv->int_reg);
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
-+ "intr_status_reg");
-+ priv->int_status_reg = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(priv->int_status_reg))
-+ return PTR_ERR(priv->int_status_reg);
-+
-+ priv->big_endian = of_device_is_big_endian(dev->of_node);
-+
-+ bcm_iproc_qspi_int_ack(soc_intc, MSPI_BSPI_DONE);
-+ bcm_iproc_qspi_int_set(soc_intc, MSPI_BSPI_DONE, false);
-+
-+ soc_intc->bcm_qspi_int_ack = bcm_iproc_qspi_int_ack;
-+ soc_intc->bcm_qspi_int_set = bcm_iproc_qspi_int_set;
-+ soc_intc->bcm_qspi_get_int_status = bcm_iproc_qspi_get_l2_int_status;
-+
-+ return bcm_qspi_probe(pdev, soc_intc);
-+}
-+
-+static int bcm_iproc_remove(struct platform_device *pdev)
-+{
-+ return bcm_qspi_remove(pdev);
-+}
-+
-+static const struct of_device_id bcm_iproc_of_match[] = {
-+ { .compatible = "brcm,spi-nsp-qspi" },
-+ { .compatible = "brcm,spi-ns2-qspi" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, bcm_iproc_of_match);
-+
-+static struct platform_driver bcm_iproc_driver = {
-+ .probe = bcm_iproc_probe,
-+ .remove = bcm_iproc_remove,
-+ .driver = {
-+ .name = "bcm_iproc",
-+ .pm = &bcm_qspi_pm_ops,
-+ .of_match_table = bcm_iproc_of_match,
-+ }
-+};
-+module_platform_driver(bcm_iproc_driver);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Kamal Dasu");
-+MODULE_DESCRIPTION("SPI flash driver for Broadcom iProc SoCs");
diff --git a/target/linux/bcm53xx/patches-4.4/084-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch b/target/linux/bcm53xx/patches-4.4/084-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch
deleted file mode 100644
index 39ebf7286b..0000000000
--- a/target/linux/bcm53xx/patches-4.4/084-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 78d759daceaf0a7058f37c4142bdca9948b6d987 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 29 Dec 2016 17:27:55 +0100
-Subject: [PATCH] spi: bcm53xx: set of_node to let DT specify device(s)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Setting of_node of master's dev seems to be a common way of letting it
-work nicely with DT. This allows specifying device there instead of
-hardcoding one in the driver code.
-
-This was successfully tested with commit 1b47b98acce2 ("ARM: BCM5301X:
-Add DT entry for SPI controller and NOR flash")
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm53xx.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/spi/spi-bcm53xx.c
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -275,10 +275,6 @@ static int bcm53xxspi_flash_read(struct
- * BCMA
- **************************************************/
-
--static struct spi_board_info bcm53xx_info = {
-- .modalias = "bcm53xxspiflash",
--};
--
- static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
- {},
-@@ -311,6 +307,7 @@ static int bcm53xxspi_bcma_probe(struct
- b53spi->bspi = true;
- bcm53xxspi_disable_bspi(b53spi);
-
-+ master->dev.of_node = dev->of_node;
- master->transfer_one = bcm53xxspi_transfer_one;
- if (b53spi->mmio_base)
- master->spi_flash_read = bcm53xxspi_flash_read;
-@@ -324,9 +321,6 @@ static int bcm53xxspi_bcma_probe(struct
- return err;
- }
-
-- /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
-- spi_new_device(master, &bcm53xx_info);
--
- return 0;
- }
-
diff --git a/target/linux/bcm53xx/patches-4.4/084-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch b/target/linux/bcm53xx/patches-4.4/084-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch
deleted file mode 100644
index 37fb6df2b9..0000000000
--- a/target/linux/bcm53xx/patches-4.4/084-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From e360e72e715f228e426edf0fc99ffa34027ab0ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 29 Dec 2016 20:13:13 +0100
-Subject: [PATCH] spi: bcm53xx: (re)license code to the GPL v2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-My intention was to release this code under GPL v2 license. For some
-reason my initial commit 0fc6a323e191 ("spi: bcm53xx: driver for SPI
-controller on Broadcom bcma SoC") totally missed licensing info.
-MODULE_LICENSE was later added by Axel specifying "GNU Public License
-v2 or later".
-
-This patch clarifies situation by adding a proper header (with Copyright
-line) and adjusting MODULE_LICENSE. It should be acked by every driver
-contributor.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Nicholas Mc Guire <hofrat@osadl.org>
-Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
-Acked-by: Jingoo Han <jingoohan1@gmail.com>
-Acked-by: Joe Perches <joe@perches.com>
-Acked-by: Axel Lin <axel.lin@ingics.com>
-Acked-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm53xx.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/spi/spi-bcm53xx.c
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -1,3 +1,11 @@
-+/*
-+ * Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
- #include <linux/kernel.h>
-@@ -355,4 +363,4 @@ module_exit(bcm53xxspi_module_exit);
-
- MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
- MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
--MODULE_LICENSE("GPL");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/bcm53xx/patches-4.4/084-0003-spi-bcm53xx-simplify-reading-SPI-data.patch b/target/linux/bcm53xx/patches-4.4/084-0003-spi-bcm53xx-simplify-reading-SPI-data.patch
deleted file mode 100644
index ee377c491f..0000000000
--- a/target/linux/bcm53xx/patches-4.4/084-0003-spi-bcm53xx-simplify-reading-SPI-data.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 29 Dec 2017 14:44:09 +0100
-Subject: [PATCH] spi: bcm53xx: simplify reading SPI data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This commit makes transfer function use spi_transfer_is_last to
-determine if currently processed transfer is the last one. Thanks to
-that we finally set hardware registers properly and it makes controller
-behave the way it's expected to.
-
-This allows simplifying read function which can now simply start reading
-from the slot 0 instead of the last saved offset. It has been
-successfully tested using spi_write_then_read.
-
-Moreover this change fixes handling messages with two writing transfers.
-It's important for SPI flash devices as their drivers commonly use one
-transfer for a command and another one for data.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/spi/spi-bcm53xx.c | 26 ++++++++++----------------
- 1 file changed, 10 insertions(+), 16 deletions(-)
-
---- a/drivers/spi/spi-bcm53xx.c
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -27,8 +27,6 @@ struct bcm53xxspi {
- struct bcma_device *core;
- struct spi_master *master;
- void __iomem *mmio_base;
--
-- size_t read_offset;
- bool bspi; /* Boot SPI mode with memory mapping */
- };
-
-@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct
-
- if (!cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
--
-- b53spi->read_offset = len;
- }
-
- static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
-@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct b
- u32 tmp;
- int i;
-
-- for (i = 0; i < b53spi->read_offset + len; i++) {
-+ for (i = 0; i < len; i++) {
- tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
- B53SPI_CDRAM_PCS_DSCK;
-- if (!cont && i == b53spi->read_offset + len - 1)
-+ if (!cont && i == len - 1)
- tmp &= ~B53SPI_CDRAM_CONT;
- tmp &= ~0x1;
- /* Command Register File */
-@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct b
-
- /* Set queue pointers */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
-- b53spi->read_offset + len - 1);
-+ bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
-
- if (cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct b
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
- for (i = 0; i < len; ++i) {
-- int offset = b53spi->read_offset + i;
-+ u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
-
- /* Data stored in the transmit register file LSB */
-- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
-+ r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
- }
--
-- b53spi->read_offset = 0;
- }
-
- static int bcm53xxspi_transfer_one(struct spi_master *master,
-@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struc
- left = t->len;
- while (left) {
- size_t to_write = min_t(size_t, 16, left);
-- bool cont = left - to_write > 0;
-+ bool cont = !spi_transfer_is_last(master, t) ||
-+ left - to_write > 0;
-
- bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
- left -= to_write;
-@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struc
- buf = (u8 *)t->rx_buf;
- left = t->len;
- while (left) {
-- size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
-- left);
-- bool cont = left - to_read > 0;
-+ size_t to_read = min_t(size_t, 16, left);
-+ bool cont = !spi_transfer_is_last(master, t) ||
-+ left - to_read > 0;
-
- bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
- left -= to_read;
diff --git a/target/linux/bcm53xx/patches-4.4/085-PCI-iproc-Hide-CONFIG_PCIE_IPROC.patch b/target/linux/bcm53xx/patches-4.4/085-PCI-iproc-Hide-CONFIG_PCIE_IPROC.patch
deleted file mode 100644
index 1d06d98a7c..0000000000
--- a/target/linux/bcm53xx/patches-4.4/085-PCI-iproc-Hide-CONFIG_PCIE_IPROC.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From c1b98e41b356a1807d7083d958790da2027c0d9d Mon Sep 17 00:00:00 2001
-From: Arnd Bergmann <arnd@arndb.de>
-Date: Tue, 24 Nov 2015 15:28:48 -0600
-Subject: [PATCH] PCI: iproc: Hide CONFIG_PCIE_IPROC
-
-PCIE_IPROC_BCMA does not require CONFIG_OF in Kconfig, but
-CONFIG_PCIE_IPROC does, so we can get a warning when building for an ARM
-platform without DT support:
-
- warning: (PCIE_IPROC_PLATFORM && PCIE_IPROC_BCMA) selects PCIE_IPROC which has unmet direct dependencies (PCI && OF && (ARM || ARM64))
-
-It turns out that CONFIG_PCIE_IPROC never needs to be enabled by a user
-anyway, we can simply rely on it being selected implictly through either
-PCIE_IPROC_PLATFORM or PCIE_IPROC_BCMA.
-
-Fixes: 4785ffbdc9b5 ("PCI: iproc: Add BCMA PCIe driver")
-Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/pci/host/Kconfig | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -119,13 +119,11 @@ config PCI_VERSATILE
- depends on ARCH_VERSATILE
-
- config PCIE_IPROC
-- tristate "Broadcom iProc PCIe controller"
-- depends on OF && (ARM || ARM64)
-- default n
-+ tristate
- help
- This enables the iProc PCIe core controller support for Broadcom's
-- iProc family of SoCs. An appropriate bus interface driver also needs
-- to be enabled
-+ iProc family of SoCs. An appropriate bus interface driver needs
-+ to be enabled to select this.
-
- config PCIE_IPROC_PLATFORM
- tristate "Broadcom iProc PCIe platform bus driver"
diff --git a/target/linux/bcm53xx/patches-4.4/086-PCI-iproc-Do-not-use-0x-in-front-of-pap.patch b/target/linux/bcm53xx/patches-4.4/086-PCI-iproc-Do-not-use-0x-in-front-of-pap.patch
deleted file mode 100644
index 5736af80e7..0000000000
--- a/target/linux/bcm53xx/patches-4.4/086-PCI-iproc-Do-not-use-0x-in-front-of-pap.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 57303e92f48a0e307fd86977ec9be5aa6a7ea681 Mon Sep 17 00:00:00 2001
-From: "Dmitry V. Krivenok" <krivenok.dmitry@gmail.com>
-Date: Mon, 30 Nov 2015 23:45:49 +0300
-Subject: [PATCH] PCI: iproc: Do not use 0x in front of %pap
-
-The "%pap" format adds a "0x" prefix, so using "0x%pap" results in output
-of "0x0x...". Drop the "0x" prefix in the format string.
-
-[bhelgaas: changelog]
-Signed-off-by: Dmitry V. Krivenok <krivenok.dmitry@gmail.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Ray Jui <rjui@broadcom.com>
----
- drivers/pci/host/pcie-iproc.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/host/pcie-iproc.c
-+++ b/drivers/pci/host/pcie-iproc.c
-@@ -245,7 +245,7 @@ static int iproc_pcie_setup_ob(struct ip
-
- if (size > max_size) {
- dev_err(pcie->dev,
-- "res size 0x%pap exceeds max supported size 0x%llx\n",
-+ "res size %pap exceeds max supported size 0x%llx\n",
- &size, max_size);
- return -EINVAL;
- }
diff --git a/target/linux/bcm53xx/patches-4.4/087-0001-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.4/087-0001-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch
deleted file mode 100644
index b5e5675c6e..0000000000
--- a/target/linux/bcm53xx/patches-4.4/087-0001-PCI-iproc-Update-iProc-PCIe-device-tree-binding.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e8b8318de645c04f8600cb5af6f6773a1878ee9d Mon Sep 17 00:00:00 2001
-From: Ray Jui <rjui@broadcom.com>
-Date: Fri, 4 Dec 2015 09:34:58 -0800
-Subject: [PATCH 1/5] PCI: iproc: Update iProc PCIe device tree binding
-
-Add a new compatible string "brcm,iproc-pcie-paxc", for PAXC-based iProc
-PCIe root complex. A PAXC-based PCIe root complex is connected to emulated
-endpoint devices internal to the ASIC.
-
-Signed-off-by: Ray Jui <rjui@broadcom.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Scott Branden <sbranden@broadcom.com>
----
- Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
-+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
-@@ -1,7 +1,10 @@
- * Broadcom iProc PCIe controller with the platform bus interface
-
- Required properties:
--- compatible: Must be "brcm,iproc-pcie"
-+- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc"
-+ for PAXC. PAXB-based root complex is used for external endpoint devices.
-+ PAXC-based root complex is connected to emulated endpoint devices
-+ internal to the ASIC
- - reg: base address and length of the PCIe controller I/O register space
- - #interrupt-cells: set to <1>
- - interrupt-map-mask and interrupt-map, standard PCI properties to define the
diff --git a/target/linux/bcm53xx/patches-4.4/087-0002-PCI-iproc-Add-PAXC-interface-support.patch b/target/linux/bcm53xx/patches-4.4/087-0002-PCI-iproc-Add-PAXC-interface-support.patch
deleted file mode 100644
index b011328761..0000000000
--- a/target/linux/bcm53xx/patches-4.4/087-0002-PCI-iproc-Add-PAXC-interface-support.patch
+++ /dev/null
@@ -1,429 +0,0 @@
-From 943ebae781f519ecfecbfa1b997f15f59116e41d Mon Sep 17 00:00:00 2001
-From: Ray Jui <rjui@broadcom.com>
-Date: Fri, 4 Dec 2015 09:34:59 -0800
-Subject: [PATCH 2/5] PCI: iproc: Add PAXC interface support
-
-Traditionally, all iProc PCIe root complexes use PAXB-based wrapper, with
-an integrated on-chip Serdes to support external endpoint devices. On
-newer iProc platforms, a PAXC-based wrapper is introduced, for connection
-with internally emulated PCIe endpoint devices in the ASIC.
-
-Add support for PAXC-based iProc PCIe root complex in the iProc PCIe core
-driver. This change factors out common logic between PAXB and PAXC, and
-uses tables to store register offsets that are different between PAXB and
-PAXC. This allows the driver to be scaled to support subsequent PAXC
-revisions in the future.
-
-Signed-off-by: Ray Jui <rjui@broadcom.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Scott Branden <sbranden@broadcom.com>
----
- drivers/pci/host/pcie-iproc-platform.c | 24 +++-
- drivers/pci/host/pcie-iproc.c | 202 +++++++++++++++++++++++++++------
- drivers/pci/host/pcie-iproc.h | 19 ++++
- 3 files changed, 205 insertions(+), 40 deletions(-)
-
---- a/drivers/pci/host/pcie-iproc-platform.c
-+++ b/drivers/pci/host/pcie-iproc-platform.c
-@@ -26,8 +26,21 @@
-
- #include "pcie-iproc.h"
-
-+static const struct of_device_id iproc_pcie_of_match_table[] = {
-+ {
-+ .compatible = "brcm,iproc-pcie",
-+ .data = (int *)IPROC_PCIE_PAXB,
-+ }, {
-+ .compatible = "brcm,iproc-pcie-paxc",
-+ .data = (int *)IPROC_PCIE_PAXC,
-+ },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
-+
- static int iproc_pcie_pltfm_probe(struct platform_device *pdev)
- {
-+ const struct of_device_id *of_id;
- struct iproc_pcie *pcie;
- struct device_node *np = pdev->dev.of_node;
- struct resource reg;
-@@ -35,11 +48,16 @@ static int iproc_pcie_pltfm_probe(struct
- LIST_HEAD(res);
- int ret;
-
-+ of_id = of_match_device(iproc_pcie_of_match_table, &pdev->dev);
-+ if (!of_id)
-+ return -EINVAL;
-+
- pcie = devm_kzalloc(&pdev->dev, sizeof(struct iproc_pcie), GFP_KERNEL);
- if (!pcie)
- return -ENOMEM;
-
- pcie->dev = &pdev->dev;
-+ pcie->type = (enum iproc_pcie_type)of_id->data;
- platform_set_drvdata(pdev, pcie);
-
- ret = of_address_to_resource(np, 0, &reg);
-@@ -114,12 +132,6 @@ static int iproc_pcie_pltfm_remove(struc
- return iproc_pcie_remove(pcie);
- }
-
--static const struct of_device_id iproc_pcie_of_match_table[] = {
-- { .compatible = "brcm,iproc-pcie", },
-- { /* sentinel */ }
--};
--MODULE_DEVICE_TABLE(of, iproc_pcie_of_match_table);
--
- static struct platform_driver iproc_pcie_pltfm_driver = {
- .driver = {
- .name = "iproc-pcie",
---- a/drivers/pci/host/pcie-iproc.c
-+++ b/drivers/pci/host/pcie-iproc.c
-@@ -30,20 +30,16 @@
-
- #include "pcie-iproc.h"
-
--#define CLK_CONTROL_OFFSET 0x000
- #define EP_PERST_SOURCE_SELECT_SHIFT 2
- #define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
- #define EP_MODE_SURVIVE_PERST_SHIFT 1
- #define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
- #define RC_PCIE_RST_OUTPUT_SHIFT 0
- #define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
-+#define PAXC_RESET_MASK 0x7f
-
--#define CFG_IND_ADDR_OFFSET 0x120
- #define CFG_IND_ADDR_MASK 0x00001ffc
-
--#define CFG_IND_DATA_OFFSET 0x124
--
--#define CFG_ADDR_OFFSET 0x1f8
- #define CFG_ADDR_BUS_NUM_SHIFT 20
- #define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
- #define CFG_ADDR_DEV_NUM_SHIFT 15
-@@ -55,12 +51,8 @@
- #define CFG_ADDR_CFG_TYPE_SHIFT 0
- #define CFG_ADDR_CFG_TYPE_MASK 0x00000003
-
--#define CFG_DATA_OFFSET 0x1fc
--
--#define SYS_RC_INTX_EN 0x330
- #define SYS_RC_INTX_MASK 0xf
-
--#define PCIE_LINK_STATUS_OFFSET 0xf0c
- #define PCIE_PHYLINKUP_SHIFT 3
- #define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT)
- #define PCIE_DL_ACTIVE_SHIFT 2
-@@ -71,12 +63,54 @@
- #define OARR_SIZE_CFG_SHIFT 1
- #define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
-
--#define OARR_LO(window) (0xd20 + (window) * 8)
--#define OARR_HI(window) (0xd24 + (window) * 8)
--#define OMAP_LO(window) (0xd40 + (window) * 8)
--#define OMAP_HI(window) (0xd44 + (window) * 8)
--
- #define MAX_NUM_OB_WINDOWS 2
-+#define MAX_NUM_PAXC_PF 4
-+
-+#define IPROC_PCIE_REG_INVALID 0xffff
-+
-+enum iproc_pcie_reg {
-+ IPROC_PCIE_CLK_CTRL = 0,
-+ IPROC_PCIE_CFG_IND_ADDR,
-+ IPROC_PCIE_CFG_IND_DATA,
-+ IPROC_PCIE_CFG_ADDR,
-+ IPROC_PCIE_CFG_DATA,
-+ IPROC_PCIE_INTX_EN,
-+ IPROC_PCIE_OARR_LO,
-+ IPROC_PCIE_OARR_HI,
-+ IPROC_PCIE_OMAP_LO,
-+ IPROC_PCIE_OMAP_HI,
-+ IPROC_PCIE_LINK_STATUS,
-+};
-+
-+/* iProc PCIe PAXB registers */
-+static const u16 iproc_pcie_reg_paxb[] = {
-+ [IPROC_PCIE_CLK_CTRL] = 0x000,
-+ [IPROC_PCIE_CFG_IND_ADDR] = 0x120,
-+ [IPROC_PCIE_CFG_IND_DATA] = 0x124,
-+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
-+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
-+ [IPROC_PCIE_INTX_EN] = 0x330,
-+ [IPROC_PCIE_OARR_LO] = 0xd20,
-+ [IPROC_PCIE_OARR_HI] = 0xd24,
-+ [IPROC_PCIE_OMAP_LO] = 0xd40,
-+ [IPROC_PCIE_OMAP_HI] = 0xd44,
-+ [IPROC_PCIE_LINK_STATUS] = 0xf0c,
-+};
-+
-+/* iProc PCIe PAXC v1 registers */
-+static const u16 iproc_pcie_reg_paxc[] = {
-+ [IPROC_PCIE_CLK_CTRL] = 0x000,
-+ [IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
-+ [IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
-+ [IPROC_PCIE_CFG_ADDR] = 0x1f8,
-+ [IPROC_PCIE_CFG_DATA] = 0x1fc,
-+ [IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID,
-+ [IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID,
-+ [IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID,
-+ [IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID,
-+ [IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID,
-+ [IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID,
-+};
-
- static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
- {
-@@ -91,6 +125,65 @@ static inline struct iproc_pcie *iproc_d
- return pcie;
- }
-
-+static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset)
-+{
-+ return !!(reg_offset == IPROC_PCIE_REG_INVALID);
-+}
-+
-+static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie,
-+ enum iproc_pcie_reg reg)
-+{
-+ return pcie->reg_offsets[reg];
-+}
-+
-+static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie,
-+ enum iproc_pcie_reg reg)
-+{
-+ u16 offset = iproc_pcie_reg_offset(pcie, reg);
-+
-+ if (iproc_pcie_reg_is_invalid(offset))
-+ return 0;
-+
-+ return readl(pcie->base + offset);
-+}
-+
-+static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie,
-+ enum iproc_pcie_reg reg, u32 val)
-+{
-+ u16 offset = iproc_pcie_reg_offset(pcie, reg);
-+
-+ if (iproc_pcie_reg_is_invalid(offset))
-+ return;
-+
-+ writel(val, pcie->base + offset);
-+}
-+
-+static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie,
-+ enum iproc_pcie_reg reg,
-+ unsigned window, u32 val)
-+{
-+ u16 offset = iproc_pcie_reg_offset(pcie, reg);
-+
-+ if (iproc_pcie_reg_is_invalid(offset))
-+ return;
-+
-+ writel(val, pcie->base + offset + (window * 8));
-+}
-+
-+static inline bool iproc_pcie_device_is_valid(struct iproc_pcie *pcie,
-+ unsigned int slot,
-+ unsigned int fn)
-+{
-+ if (slot > 0)
-+ return false;
-+
-+ /* PAXC can only support limited number of functions */
-+ if (pcie->type == IPROC_PCIE_PAXC && fn >= MAX_NUM_PAXC_PF)
-+ return false;
-+
-+ return true;
-+}
-+
- /**
- * Note access to the configuration registers are protected at the higher layer
- * by 'pci_lock' in drivers/pci/access.c
-@@ -104,28 +197,34 @@ static void __iomem *iproc_pcie_map_cfg_
- unsigned fn = PCI_FUNC(devfn);
- unsigned busno = bus->number;
- u32 val;
-+ u16 offset;
-+
-+ if (!iproc_pcie_device_is_valid(pcie, slot, fn))
-+ return NULL;
-
- /* root complex access */
- if (busno == 0) {
-- if (slot >= 1)
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
-+ where & CFG_IND_ADDR_MASK);
-+ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
-+ if (iproc_pcie_reg_is_invalid(offset))
- return NULL;
-- writel(where & CFG_IND_ADDR_MASK,
-- pcie->base + CFG_IND_ADDR_OFFSET);
-- return (pcie->base + CFG_IND_DATA_OFFSET);
-+ else
-+ return (pcie->base + offset);
- }
-
-- if (fn > 1)
-- return NULL;
--
- /* EP device access */
- val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
- (slot << CFG_ADDR_DEV_NUM_SHIFT) |
- (fn << CFG_ADDR_FUNC_NUM_SHIFT) |
- (where & CFG_ADDR_REG_NUM_MASK) |
- (1 & CFG_ADDR_CFG_TYPE_MASK);
-- writel(val, pcie->base + CFG_ADDR_OFFSET);
--
-- return (pcie->base + CFG_DATA_OFFSET);
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val);
-+ offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA);
-+ if (iproc_pcie_reg_is_invalid(offset))
-+ return NULL;
-+ else
-+ return (pcie->base + offset);
- }
-
- static struct pci_ops iproc_pcie_ops = {
-@@ -138,18 +237,29 @@ static void iproc_pcie_reset(struct ipro
- {
- u32 val;
-
-+ if (pcie->type == IPROC_PCIE_PAXC) {
-+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
-+ val &= ~PAXC_RESET_MASK;
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
-+ udelay(100);
-+ val |= PAXC_RESET_MASK;
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
-+ udelay(100);
-+ return;
-+ }
-+
- /*
- * Select perst_b signal as reset source. Put the device into reset,
- * and then bring it out of reset
- */
-- val = readl(pcie->base + CLK_CONTROL_OFFSET);
-+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
- val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
- ~RC_PCIE_RST_OUTPUT;
-- writel(val, pcie->base + CLK_CONTROL_OFFSET);
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
- udelay(250);
-
- val |= RC_PCIE_RST_OUTPUT;
-- writel(val, pcie->base + CLK_CONTROL_OFFSET);
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
- msleep(100);
- }
-
-@@ -160,7 +270,14 @@ static int iproc_pcie_check_link(struct
- u16 pos, link_status;
- bool link_is_active = false;
-
-- val = readl(pcie->base + PCIE_LINK_STATUS_OFFSET);
-+ /*
-+ * PAXC connects to emulated endpoint devices directly and does not
-+ * have a Serdes. Therefore skip the link detection logic here.
-+ */
-+ if (pcie->type == IPROC_PCIE_PAXC)
-+ return 0;
-+
-+ val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS);
- if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
- dev_err(pcie->dev, "PHY or data link is INACTIVE!\n");
- return -ENODEV;
-@@ -221,7 +338,7 @@ static int iproc_pcie_check_link(struct
-
- static void iproc_pcie_enable(struct iproc_pcie *pcie)
- {
-- writel(SYS_RC_INTX_MASK, pcie->base + SYS_RC_INTX_EN);
-+ iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
- }
-
- /**
-@@ -272,11 +389,15 @@ static int iproc_pcie_setup_ob(struct ip
- axi_addr -= ob->axi_offset;
-
- for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
-- writel(lower_32_bits(axi_addr) | OARR_VALID |
-- (ob->set_oarr_size ? 1 : 0), pcie->base + OARR_LO(i));
-- writel(upper_32_bits(axi_addr), pcie->base + OARR_HI(i));
-- writel(lower_32_bits(pci_addr), pcie->base + OMAP_LO(i));
-- writel(upper_32_bits(pci_addr), pcie->base + OMAP_HI(i));
-+ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i,
-+ lower_32_bits(axi_addr) | OARR_VALID |
-+ (ob->set_oarr_size ? 1 : 0));
-+ iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i,
-+ upper_32_bits(axi_addr));
-+ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i,
-+ lower_32_bits(pci_addr));
-+ iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i,
-+ upper_32_bits(pci_addr));
-
- size -= ob->window_size;
- if (size == 0)
-@@ -340,6 +461,19 @@ int iproc_pcie_setup(struct iproc_pcie *
- goto err_exit_phy;
- }
-
-+ switch (pcie->type) {
-+ case IPROC_PCIE_PAXB:
-+ pcie->reg_offsets = iproc_pcie_reg_paxb;
-+ break;
-+ case IPROC_PCIE_PAXC:
-+ pcie->reg_offsets = iproc_pcie_reg_paxc;
-+ break;
-+ default:
-+ dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
-+ ret = -EINVAL;
-+ goto err_power_off_phy;
-+ }
-+
- iproc_pcie_reset(pcie);
-
- if (pcie->need_ob_cfg) {
---- a/drivers/pci/host/pcie-iproc.h
-+++ b/drivers/pci/host/pcie-iproc.h
-@@ -15,6 +15,20 @@
- #define _PCIE_IPROC_H
-
- /**
-+ * iProc PCIe interface type
-+ *
-+ * PAXB is the wrapper used in root complex that can be connected to an
-+ * external endpoint device.
-+ *
-+ * PAXC is the wrapper used in root complex dedicated for internal emulated
-+ * endpoint devices.
-+ */
-+enum iproc_pcie_type {
-+ IPROC_PCIE_PAXB = 0,
-+ IPROC_PCIE_PAXC,
-+};
-+
-+/**
- * iProc PCIe outbound mapping
- * @set_oarr_size: indicates the OARR size bit needs to be set
- * @axi_offset: offset from the AXI address to the internal address used by
-@@ -29,7 +43,10 @@ struct iproc_pcie_ob {
-
- /**
- * iProc PCIe device
-+ *
- * @dev: pointer to device data structure
-+ * @type: iProc PCIe interface type
-+ * @reg_offsets: register offsets
- * @base: PCIe host controller I/O register base
- * @sysdata: Per PCI controller data (ARM-specific)
- * @root_bus: pointer to root bus
-@@ -41,6 +58,8 @@ struct iproc_pcie_ob {
- */
- struct iproc_pcie {
- struct device *dev;
-+ enum iproc_pcie_type type;
-+ const u16 *reg_offsets;
- void __iomem *base;
- #ifdef CONFIG_ARM
- struct pci_sys_data sysdata;
diff --git a/target/linux/bcm53xx/patches-4.4/087-0003-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch b/target/linux/bcm53xx/patches-4.4/087-0003-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch
deleted file mode 100644
index b02b121cb0..0000000000
--- a/target/linux/bcm53xx/patches-4.4/087-0003-PCI-iproc-Add-iProc-PCIe-MSI-device-tree-binding.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From c7bd48195377435ecaf38869b936be8e7abe3489 Mon Sep 17 00:00:00 2001
-From: Ray Jui <rjui@broadcom.com>
-Date: Fri, 4 Dec 2015 09:35:00 -0800
-Subject: [PATCH 3/5] PCI: iproc: Add iProc PCIe MSI device tree binding
-
-Update the iProc PCIe device tree bindings with added binding information
-for MSI.
-
-Signed-off-by: Ray Jui <rjui@broadcom.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Anup Patel <anup.patel@broadcom.com>
-Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
-Reviewed-by: Scott Branden <sbranden@broadcom.com>
----
- .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 35 ++++++++++++++++++++++
- 1 file changed, 35 insertions(+)
-
---- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
-+++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt
-@@ -35,6 +35,28 @@ Optional:
- - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to
- increase the outbound window size
-
-+MSI support (optional):
-+
-+For older platforms without MSI integrated in the GIC, iProc PCIe core provides
-+an event queue based MSI support. The iProc MSI uses host memories to store
-+MSI posted writes in the event queues
-+
-+- msi-parent: Link to the device node of the MSI controller. On newer iProc
-+platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc
-+platforms without MSI support in its interrupt controller, one may use the
-+event queue based MSI support integrated within the iProc PCIe core.
-+
-+When the iProc event queue based MSI is used, one needs to define the
-+following properties in the MSI device node:
-+- compatible: Must be "brcm,iproc-msi"
-+- msi-controller: claims itself as an MSI controller
-+- interrupt-parent: Link to its parent interrupt device
-+- interrupts: List of interrupt IDs from its parent interrupt device
-+
-+Optional properties:
-+- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that
-+require the interrupt enable registers to be set explicitly to enable MSI
-+
- Example:
- pcie0: pcie@18012000 {
- compatible = "brcm,iproc-pcie";
-@@ -61,6 +83,19 @@ Example:
- brcm,pcie-ob-oarr-size;
- brcm,pcie-ob-axi-offset = <0x00000000>;
- brcm,pcie-ob-window-size = <256>;
-+
-+ msi-parent = <&msi0>;
-+
-+ /* iProc event queue based MSI */
-+ msi0: msi@18012000 {
-+ compatible = "brcm,iproc-msi";
-+ msi-controller;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
-+ <GIC_SPI 97 IRQ_TYPE_NONE>,
-+ <GIC_SPI 98 IRQ_TYPE_NONE>,
-+ <GIC_SPI 99 IRQ_TYPE_NONE>,
-+ };
- };
-
- pcie1: pcie@18013000 {
diff --git a/target/linux/bcm53xx/patches-4.4/087-0004-PCI-iproc-Add-iProc-PCIe-MSI-support.patch b/target/linux/bcm53xx/patches-4.4/087-0004-PCI-iproc-Add-iProc-PCIe-MSI-support.patch
deleted file mode 100644
index 19ba57736d..0000000000
--- a/target/linux/bcm53xx/patches-4.4/087-0004-PCI-iproc-Add-iProc-PCIe-MSI-support.patch
+++ /dev/null
@@ -1,891 +0,0 @@
-From 3bc2b2348835f6edd33c383a2fbcf15fe3dac3b2 Mon Sep 17 00:00:00 2001
-From: Ray Jui <rjui@broadcom.com>
-Date: Wed, 6 Jan 2016 18:04:35 -0600
-Subject: [PATCH 4/5] PCI: iproc: Add iProc PCIe MSI support
-
-Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based
-platforms.
-
-The iProc PCIe MSI support deploys an event queue-based implementation.
-Each event queue is serviced by a GIC interrupt and can support up to 64
-MSI vectors. Host memory is allocated for the event queues, and each event
-queue consists of 64 word-sized entries. MSI data is written to the lower
-16-bit of each entry, whereas the upper 16-bit of the entry is reserved for
-the controller for internal processing.
-
-Each event queue is tracked by a head pointer and tail pointer. Head
-pointer indicates the next entry in the event queue to be processed by
-the driver and is updated by the driver after processing is done.
-The controller uses the tail pointer as the next MSI data insertion
-point. The controller ensures MSI data is flushed to host memory before
-updating the tail pointer and then triggering the interrupt.
-
-MSI IRQ affinity is supported by evenly distributing the interrupts to each
-CPU core. MSI vector is moved from one GIC interrupt to another in order
-to steer to the target CPU.
-
-Therefore, the actual number of supported MSI vectors is:
-
- M * 64 / N
-
-where M denotes the number of GIC interrupts (event queues), and N denotes
-the number of CPU cores.
-
-This iProc event queue-based MSI support should not be used with newer
-platforms with integrated MSI support in the GIC (e.g., giv2m or
-gicv3-its).
-
-[bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>]
-Signed-off-by: Ray Jui <rjui@broadcom.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Reviewed-by: Anup Patel <anup.patel@broadcom.com>
-Reviewed-by: Vikram Prakash <vikramp@broadcom.com>
-Reviewed-by: Scott Branden <sbranden@broadcom.com>
-Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
----
- drivers/pci/host/Kconfig | 10 +
- drivers/pci/host/Makefile | 1 +
- drivers/pci/host/pcie-iproc-bcma.c | 1 +
- drivers/pci/host/pcie-iproc-msi.c | 675 +++++++++++++++++++++++++++++++++
- drivers/pci/host/pcie-iproc-platform.c | 1 +
- drivers/pci/host/pcie-iproc.c | 26 ++
- drivers/pci/host/pcie-iproc.h | 23 +-
- 7 files changed, 735 insertions(+), 2 deletions(-)
- create mode 100644 drivers/pci/host/pcie-iproc-msi.c
-
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -146,6 +146,16 @@ config PCIE_IPROC_BCMA
- Say Y here if you want to use the Broadcom iProc PCIe controller
- through the BCMA bus interface
-
-+config PCIE_IPROC_MSI
-+ bool "Broadcom iProc PCIe MSI support"
-+ depends on PCIE_IPROC_PLATFORM || PCIE_IPROC_BCMA
-+ depends on PCI_MSI
-+ select PCI_MSI_IRQ_DOMAIN
-+ default ARCH_BCM_IPROC
-+ help
-+ Say Y here if you want to enable MSI support for Broadcom's iProc
-+ PCIe controller
-+
- config PCIE_ALTERA
- bool "Altera PCIe controller"
- depends on ARM || NIOS2
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene
- obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
- obj-$(CONFIG_PCI_VERSATILE) += pci-versatile.o
- obj-$(CONFIG_PCIE_IPROC) += pcie-iproc.o
-+obj-$(CONFIG_PCIE_IPROC_MSI) += pcie-iproc-msi.o
- obj-$(CONFIG_PCIE_IPROC_PLATFORM) += pcie-iproc-platform.o
- obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
- obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
---- a/drivers/pci/host/pcie-iproc-bcma.c
-+++ b/drivers/pci/host/pcie-iproc-bcma.c
-@@ -55,6 +55,7 @@ static int iproc_pcie_bcma_probe(struct
- bcma_set_drvdata(bdev, pcie);
-
- pcie->base = bdev->io_addr;
-+ pcie->base_addr = bdev->addr;
-
- res_mem.start = bdev->addr_s[0];
- res_mem.end = bdev->addr_s[0] + SZ_128M - 1;
---- /dev/null
-+++ b/drivers/pci/host/pcie-iproc-msi.c
-@@ -0,0 +1,675 @@
-+/*
-+ * Copyright (C) 2015 Broadcom Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation version 2.
-+ *
-+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
-+ * kind, whether express or implied; without even the implied warranty
-+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/interrupt.h>
-+#include <linux/irqchip/chained_irq.h>
-+#include <linux/irqdomain.h>
-+#include <linux/msi.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_pci.h>
-+#include <linux/pci.h>
-+
-+#include "pcie-iproc.h"
-+
-+#define IPROC_MSI_INTR_EN_SHIFT 11
-+#define IPROC_MSI_INTR_EN BIT(IPROC_MSI_INTR_EN_SHIFT)
-+#define IPROC_MSI_INT_N_EVENT_SHIFT 1
-+#define IPROC_MSI_INT_N_EVENT BIT(IPROC_MSI_INT_N_EVENT_SHIFT)
-+#define IPROC_MSI_EQ_EN_SHIFT 0
-+#define IPROC_MSI_EQ_EN BIT(IPROC_MSI_EQ_EN_SHIFT)
-+
-+#define IPROC_MSI_EQ_MASK 0x3f
-+
-+/* Max number of GIC interrupts */
-+#define NR_HW_IRQS 6
-+
-+/* Number of entries in each event queue */
-+#define EQ_LEN 64
-+
-+/* Size of each event queue memory region */
-+#define EQ_MEM_REGION_SIZE SZ_4K
-+
-+/* Size of each MSI address region */
-+#define MSI_MEM_REGION_SIZE SZ_4K
-+
-+enum iproc_msi_reg {
-+ IPROC_MSI_EQ_PAGE = 0,
-+ IPROC_MSI_EQ_PAGE_UPPER,
-+ IPROC_MSI_PAGE,
-+ IPROC_MSI_PAGE_UPPER,
-+ IPROC_MSI_CTRL,
-+ IPROC_MSI_EQ_HEAD,
-+ IPROC_MSI_EQ_TAIL,
-+ IPROC_MSI_INTS_EN,
-+ IPROC_MSI_REG_SIZE,
-+};
-+
-+struct iproc_msi;
-+
-+/**
-+ * iProc MSI group
-+ *
-+ * One MSI group is allocated per GIC interrupt, serviced by one iProc MSI
-+ * event queue.
-+ *
-+ * @msi: pointer to iProc MSI data
-+ * @gic_irq: GIC interrupt
-+ * @eq: Event queue number
-+ */
-+struct iproc_msi_grp {
-+ struct iproc_msi *msi;
-+ int gic_irq;
-+ unsigned int eq;
-+};
-+
-+/**
-+ * iProc event queue based MSI
-+ *
-+ * Only meant to be used on platforms without MSI support integrated into the
-+ * GIC.
-+ *
-+ * @pcie: pointer to iProc PCIe data
-+ * @reg_offsets: MSI register offsets
-+ * @grps: MSI groups
-+ * @nr_irqs: number of total interrupts connected to GIC
-+ * @nr_cpus: number of toal CPUs
-+ * @has_inten_reg: indicates the MSI interrupt enable register needs to be
-+ * set explicitly (required for some legacy platforms)
-+ * @bitmap: MSI vector bitmap
-+ * @bitmap_lock: lock to protect access to the MSI bitmap
-+ * @nr_msi_vecs: total number of MSI vectors
-+ * @inner_domain: inner IRQ domain
-+ * @msi_domain: MSI IRQ domain
-+ * @nr_eq_region: required number of 4K aligned memory region for MSI event
-+ * queues
-+ * @nr_msi_region: required number of 4K aligned address region for MSI posted
-+ * writes
-+ * @eq_cpu: pointer to allocated memory region for MSI event queues
-+ * @eq_dma: DMA address of MSI event queues
-+ * @msi_addr: MSI address
-+ */
-+struct iproc_msi {
-+ struct iproc_pcie *pcie;
-+ const u16 (*reg_offsets)[IPROC_MSI_REG_SIZE];
-+ struct iproc_msi_grp *grps;
-+ int nr_irqs;
-+ int nr_cpus;
-+ bool has_inten_reg;
-+ unsigned long *bitmap;
-+ struct mutex bitmap_lock;
-+ unsigned int nr_msi_vecs;
-+ struct irq_domain *inner_domain;
-+ struct irq_domain *msi_domain;
-+ unsigned int nr_eq_region;
-+ unsigned int nr_msi_region;
-+ void *eq_cpu;
-+ dma_addr_t eq_dma;
-+ phys_addr_t msi_addr;
-+};
-+
-+static const u16 iproc_msi_reg_paxb[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = {
-+ { 0x200, 0x2c0, 0x204, 0x2c4, 0x210, 0x250, 0x254, 0x208 },
-+ { 0x200, 0x2c0, 0x204, 0x2c4, 0x214, 0x258, 0x25c, 0x208 },
-+ { 0x200, 0x2c0, 0x204, 0x2c4, 0x218, 0x260, 0x264, 0x208 },
-+ { 0x200, 0x2c0, 0x204, 0x2c4, 0x21c, 0x268, 0x26c, 0x208 },
-+ { 0x200, 0x2c0, 0x204, 0x2c4, 0x220, 0x270, 0x274, 0x208 },
-+ { 0x200, 0x2c0, 0x204, 0x2c4, 0x224, 0x278, 0x27c, 0x208 },
-+};
-+
-+static const u16 iproc_msi_reg_paxc[NR_HW_IRQS][IPROC_MSI_REG_SIZE] = {
-+ { 0xc00, 0xc04, 0xc08, 0xc0c, 0xc40, 0xc50, 0xc60 },
-+ { 0xc10, 0xc14, 0xc18, 0xc1c, 0xc44, 0xc54, 0xc64 },
-+ { 0xc20, 0xc24, 0xc28, 0xc2c, 0xc48, 0xc58, 0xc68 },
-+ { 0xc30, 0xc34, 0xc38, 0xc3c, 0xc4c, 0xc5c, 0xc6c },
-+};
-+
-+static inline u32 iproc_msi_read_reg(struct iproc_msi *msi,
-+ enum iproc_msi_reg reg,
-+ unsigned int eq)
-+{
-+ struct iproc_pcie *pcie = msi->pcie;
-+
-+ return readl_relaxed(pcie->base + msi->reg_offsets[eq][reg]);
-+}
-+
-+static inline void iproc_msi_write_reg(struct iproc_msi *msi,
-+ enum iproc_msi_reg reg,
-+ int eq, u32 val)
-+{
-+ struct iproc_pcie *pcie = msi->pcie;
-+
-+ writel_relaxed(val, pcie->base + msi->reg_offsets[eq][reg]);
-+}
-+
-+static inline u32 hwirq_to_group(struct iproc_msi *msi, unsigned long hwirq)
-+{
-+ return (hwirq % msi->nr_irqs);
-+}
-+
-+static inline unsigned int iproc_msi_addr_offset(struct iproc_msi *msi,
-+ unsigned long hwirq)
-+{
-+ if (msi->nr_msi_region > 1)
-+ return hwirq_to_group(msi, hwirq) * MSI_MEM_REGION_SIZE;
-+ else
-+ return hwirq_to_group(msi, hwirq) * sizeof(u32);
-+}
-+
-+static inline unsigned int iproc_msi_eq_offset(struct iproc_msi *msi, u32 eq)
-+{
-+ if (msi->nr_eq_region > 1)
-+ return eq * EQ_MEM_REGION_SIZE;
-+ else
-+ return eq * EQ_LEN * sizeof(u32);
-+}
-+
-+static struct irq_chip iproc_msi_irq_chip = {
-+ .name = "iProc-MSI",
-+};
-+
-+static struct msi_domain_info iproc_msi_domain_info = {
-+ .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-+ MSI_FLAG_PCI_MSIX,
-+ .chip = &iproc_msi_irq_chip,
-+};
-+
-+/*
-+ * In iProc PCIe core, each MSI group is serviced by a GIC interrupt and a
-+ * dedicated event queue. Each MSI group can support up to 64 MSI vectors.
-+ *
-+ * The number of MSI groups varies between different iProc SoCs. The total
-+ * number of CPU cores also varies. To support MSI IRQ affinity, we
-+ * distribute GIC interrupts across all available CPUs. MSI vector is moved
-+ * from one GIC interrupt to another to steer to the target CPU.
-+ *
-+ * Assuming:
-+ * - the number of MSI groups is M
-+ * - the number of CPU cores is N
-+ * - M is always a multiple of N
-+ *
-+ * Total number of raw MSI vectors = M * 64
-+ * Total number of supported MSI vectors = (M * 64) / N
-+ */
-+static inline int hwirq_to_cpu(struct iproc_msi *msi, unsigned long hwirq)
-+{
-+ return (hwirq % msi->nr_cpus);
-+}
-+
-+static inline unsigned long hwirq_to_canonical_hwirq(struct iproc_msi *msi,
-+ unsigned long hwirq)
-+{
-+ return (hwirq - hwirq_to_cpu(msi, hwirq));
-+}
-+
-+static int iproc_msi_irq_set_affinity(struct irq_data *data,
-+ const struct cpumask *mask, bool force)
-+{
-+ struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
-+ int target_cpu = cpumask_first(mask);
-+ int curr_cpu;
-+
-+ curr_cpu = hwirq_to_cpu(msi, data->hwirq);
-+ if (curr_cpu == target_cpu)
-+ return IRQ_SET_MASK_OK_DONE;
-+
-+ /* steer MSI to the target CPU */
-+ data->hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq) + target_cpu;
-+
-+ return IRQ_SET_MASK_OK;
-+}
-+
-+static void iproc_msi_irq_compose_msi_msg(struct irq_data *data,
-+ struct msi_msg *msg)
-+{
-+ struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
-+ dma_addr_t addr;
-+
-+ addr = msi->msi_addr + iproc_msi_addr_offset(msi, data->hwirq);
-+ msg->address_lo = lower_32_bits(addr);
-+ msg->address_hi = upper_32_bits(addr);
-+ msg->data = data->hwirq;
-+}
-+
-+static struct irq_chip iproc_msi_bottom_irq_chip = {
-+ .name = "MSI",
-+ .irq_set_affinity = iproc_msi_irq_set_affinity,
-+ .irq_compose_msi_msg = iproc_msi_irq_compose_msi_msg,
-+};
-+
-+static int iproc_msi_irq_domain_alloc(struct irq_domain *domain,
-+ unsigned int virq, unsigned int nr_irqs,
-+ void *args)
-+{
-+ struct iproc_msi *msi = domain->host_data;
-+ int hwirq;
-+
-+ mutex_lock(&msi->bitmap_lock);
-+
-+ /* Allocate 'nr_cpus' number of MSI vectors each time */
-+ hwirq = bitmap_find_next_zero_area(msi->bitmap, msi->nr_msi_vecs, 0,
-+ msi->nr_cpus, 0);
-+ if (hwirq < msi->nr_msi_vecs) {
-+ bitmap_set(msi->bitmap, hwirq, msi->nr_cpus);
-+ } else {
-+ mutex_unlock(&msi->bitmap_lock);
-+ return -ENOSPC;
-+ }
-+
-+ mutex_unlock(&msi->bitmap_lock);
-+
-+ irq_domain_set_info(domain, virq, hwirq, &iproc_msi_bottom_irq_chip,
-+ domain->host_data, handle_simple_irq, NULL, NULL);
-+
-+ return 0;
-+}
-+
-+static void iproc_msi_irq_domain_free(struct irq_domain *domain,
-+ unsigned int virq, unsigned int nr_irqs)
-+{
-+ struct irq_data *data = irq_domain_get_irq_data(domain, virq);
-+ struct iproc_msi *msi = irq_data_get_irq_chip_data(data);
-+ unsigned int hwirq;
-+
-+ mutex_lock(&msi->bitmap_lock);
-+
-+ hwirq = hwirq_to_canonical_hwirq(msi, data->hwirq);
-+ bitmap_clear(msi->bitmap, hwirq, msi->nr_cpus);
-+
-+ mutex_unlock(&msi->bitmap_lock);
-+
-+ irq_domain_free_irqs_parent(domain, virq, nr_irqs);
-+}
-+
-+static const struct irq_domain_ops msi_domain_ops = {
-+ .alloc = iproc_msi_irq_domain_alloc,
-+ .free = iproc_msi_irq_domain_free,
-+};
-+
-+static inline u32 decode_msi_hwirq(struct iproc_msi *msi, u32 eq, u32 head)
-+{
-+ u32 *msg, hwirq;
-+ unsigned int offs;
-+
-+ offs = iproc_msi_eq_offset(msi, eq) + head * sizeof(u32);
-+ msg = (u32 *)(msi->eq_cpu + offs);
-+ hwirq = *msg & IPROC_MSI_EQ_MASK;
-+
-+ /*
-+ * Since we have multiple hwirq mapped to a single MSI vector,
-+ * now we need to derive the hwirq at CPU0. It can then be used to
-+ * mapped back to virq.
-+ */
-+ return hwirq_to_canonical_hwirq(msi, hwirq);
-+}
-+
-+static void iproc_msi_handler(struct irq_desc *desc)
-+{
-+ struct irq_chip *chip = irq_desc_get_chip(desc);
-+ struct iproc_msi_grp *grp;
-+ struct iproc_msi *msi;
-+ struct iproc_pcie *pcie;
-+ u32 eq, head, tail, nr_events;
-+ unsigned long hwirq;
-+ int virq;
-+
-+ chained_irq_enter(chip, desc);
-+
-+ grp = irq_desc_get_handler_data(desc);
-+ msi = grp->msi;
-+ pcie = msi->pcie;
-+ eq = grp->eq;
-+
-+ /*
-+ * iProc MSI event queue is tracked by head and tail pointers. Head
-+ * pointer indicates the next entry (MSI data) to be consumed by SW in
-+ * the queue and needs to be updated by SW. iProc MSI core uses the
-+ * tail pointer as the next data insertion point.
-+ *
-+ * Entries between head and tail pointers contain valid MSI data. MSI
-+ * data is guaranteed to be in the event queue memory before the tail
-+ * pointer is updated by the iProc MSI core.
-+ */
-+ head = iproc_msi_read_reg(msi, IPROC_MSI_EQ_HEAD,
-+ eq) & IPROC_MSI_EQ_MASK;
-+ do {
-+ tail = iproc_msi_read_reg(msi, IPROC_MSI_EQ_TAIL,
-+ eq) & IPROC_MSI_EQ_MASK;
-+
-+ /*
-+ * Figure out total number of events (MSI data) to be
-+ * processed.
-+ */
-+ nr_events = (tail < head) ?
-+ (EQ_LEN - (head - tail)) : (tail - head);
-+ if (!nr_events)
-+ break;
-+
-+ /* process all outstanding events */
-+ while (nr_events--) {
-+ hwirq = decode_msi_hwirq(msi, eq, head);
-+ virq = irq_find_mapping(msi->inner_domain, hwirq);
-+ generic_handle_irq(virq);
-+
-+ head++;
-+ head %= EQ_LEN;
-+ }
-+
-+ /*
-+ * Now all outstanding events have been processed. Update the
-+ * head pointer.
-+ */
-+ iproc_msi_write_reg(msi, IPROC_MSI_EQ_HEAD, eq, head);
-+
-+ /*
-+ * Now go read the tail pointer again to see if there are new
-+ * oustanding events that came in during the above window.
-+ */
-+ } while (true);
-+
-+ chained_irq_exit(chip, desc);
-+}
-+
-+static void iproc_msi_enable(struct iproc_msi *msi)
-+{
-+ int i, eq;
-+ u32 val;
-+
-+ /* Program memory region for each event queue */
-+ for (i = 0; i < msi->nr_eq_region; i++) {
-+ dma_addr_t addr = msi->eq_dma + (i * EQ_MEM_REGION_SIZE);
-+
-+ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE, i,
-+ lower_32_bits(addr));
-+ iproc_msi_write_reg(msi, IPROC_MSI_EQ_PAGE_UPPER, i,
-+ upper_32_bits(addr));
-+ }
-+
-+ /* Program address region for MSI posted writes */
-+ for (i = 0; i < msi->nr_msi_region; i++) {
-+ phys_addr_t addr = msi->msi_addr + (i * MSI_MEM_REGION_SIZE);
-+
-+ iproc_msi_write_reg(msi, IPROC_MSI_PAGE, i,
-+ lower_32_bits(addr));
-+ iproc_msi_write_reg(msi, IPROC_MSI_PAGE_UPPER, i,
-+ upper_32_bits(addr));
-+ }
-+
-+ for (eq = 0; eq < msi->nr_irqs; eq++) {
-+ /* Enable MSI event queue */
-+ val = IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
-+ IPROC_MSI_EQ_EN;
-+ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
-+
-+ /*
-+ * Some legacy platforms require the MSI interrupt enable
-+ * register to be set explicitly.
-+ */
-+ if (msi->has_inten_reg) {
-+ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq);
-+ val |= BIT(eq);
-+ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val);
-+ }
-+ }
-+}
-+
-+static void iproc_msi_disable(struct iproc_msi *msi)
-+{
-+ u32 eq, val;
-+
-+ for (eq = 0; eq < msi->nr_irqs; eq++) {
-+ if (msi->has_inten_reg) {
-+ val = iproc_msi_read_reg(msi, IPROC_MSI_INTS_EN, eq);
-+ val &= ~BIT(eq);
-+ iproc_msi_write_reg(msi, IPROC_MSI_INTS_EN, eq, val);
-+ }
-+
-+ val = iproc_msi_read_reg(msi, IPROC_MSI_CTRL, eq);
-+ val &= ~(IPROC_MSI_INTR_EN | IPROC_MSI_INT_N_EVENT |
-+ IPROC_MSI_EQ_EN);
-+ iproc_msi_write_reg(msi, IPROC_MSI_CTRL, eq, val);
-+ }
-+}
-+
-+static int iproc_msi_alloc_domains(struct device_node *node,
-+ struct iproc_msi *msi)
-+{
-+ msi->inner_domain = irq_domain_add_linear(NULL, msi->nr_msi_vecs,
-+ &msi_domain_ops, msi);
-+ if (!msi->inner_domain)
-+ return -ENOMEM;
-+
-+ msi->msi_domain = pci_msi_create_irq_domain(of_node_to_fwnode(node),
-+ &iproc_msi_domain_info,
-+ msi->inner_domain);
-+ if (!msi->msi_domain) {
-+ irq_domain_remove(msi->inner_domain);
-+ return -ENOMEM;
-+ }
-+
-+ return 0;
-+}
-+
-+static void iproc_msi_free_domains(struct iproc_msi *msi)
-+{
-+ if (msi->msi_domain)
-+ irq_domain_remove(msi->msi_domain);
-+
-+ if (msi->inner_domain)
-+ irq_domain_remove(msi->inner_domain);
-+}
-+
-+static void iproc_msi_irq_free(struct iproc_msi *msi, unsigned int cpu)
-+{
-+ int i;
-+
-+ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) {
-+ irq_set_chained_handler_and_data(msi->grps[i].gic_irq,
-+ NULL, NULL);
-+ }
-+}
-+
-+static int iproc_msi_irq_setup(struct iproc_msi *msi, unsigned int cpu)
-+{
-+ int i, ret;
-+ cpumask_var_t mask;
-+ struct iproc_pcie *pcie = msi->pcie;
-+
-+ for (i = cpu; i < msi->nr_irqs; i += msi->nr_cpus) {
-+ irq_set_chained_handler_and_data(msi->grps[i].gic_irq,
-+ iproc_msi_handler,
-+ &msi->grps[i]);
-+ /* Dedicate GIC interrupt to each CPU core */
-+ if (alloc_cpumask_var(&mask, GFP_KERNEL)) {
-+ cpumask_clear(mask);
-+ cpumask_set_cpu(cpu, mask);
-+ ret = irq_set_affinity(msi->grps[i].gic_irq, mask);
-+ if (ret)
-+ dev_err(pcie->dev,
-+ "failed to set affinity for IRQ%d\n",
-+ msi->grps[i].gic_irq);
-+ free_cpumask_var(mask);
-+ } else {
-+ dev_err(pcie->dev, "failed to alloc CPU mask\n");
-+ ret = -EINVAL;
-+ }
-+
-+ if (ret) {
-+ /* Free all configured/unconfigured IRQs */
-+ iproc_msi_irq_free(msi, cpu);
-+ return ret;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node)
-+{
-+ struct iproc_msi *msi;
-+ int i, ret;
-+ unsigned int cpu;
-+
-+ if (!of_device_is_compatible(node, "brcm,iproc-msi"))
-+ return -ENODEV;
-+
-+ if (!of_find_property(node, "msi-controller", NULL))
-+ return -ENODEV;
-+
-+ if (pcie->msi)
-+ return -EBUSY;
-+
-+ msi = devm_kzalloc(pcie->dev, sizeof(*msi), GFP_KERNEL);
-+ if (!msi)
-+ return -ENOMEM;
-+
-+ msi->pcie = pcie;
-+ pcie->msi = msi;
-+ msi->msi_addr = pcie->base_addr;
-+ mutex_init(&msi->bitmap_lock);
-+ msi->nr_cpus = num_possible_cpus();
-+
-+ msi->nr_irqs = of_irq_count(node);
-+ if (!msi->nr_irqs) {
-+ dev_err(pcie->dev, "found no MSI GIC interrupt\n");
-+ return -ENODEV;
-+ }
-+
-+ if (msi->nr_irqs > NR_HW_IRQS) {
-+ dev_warn(pcie->dev, "too many MSI GIC interrupts defined %d\n",
-+ msi->nr_irqs);
-+ msi->nr_irqs = NR_HW_IRQS;
-+ }
-+
-+ if (msi->nr_irqs < msi->nr_cpus) {
-+ dev_err(pcie->dev,
-+ "not enough GIC interrupts for MSI affinity\n");
-+ return -EINVAL;
-+ }
-+
-+ if (msi->nr_irqs % msi->nr_cpus != 0) {
-+ msi->nr_irqs -= msi->nr_irqs % msi->nr_cpus;
-+ dev_warn(pcie->dev, "Reducing number of interrupts to %d\n",
-+ msi->nr_irqs);
-+ }
-+
-+ switch (pcie->type) {
-+ case IPROC_PCIE_PAXB:
-+ msi->reg_offsets = iproc_msi_reg_paxb;
-+ msi->nr_eq_region = 1;
-+ msi->nr_msi_region = 1;
-+ break;
-+ case IPROC_PCIE_PAXC:
-+ msi->reg_offsets = iproc_msi_reg_paxc;
-+ msi->nr_eq_region = msi->nr_irqs;
-+ msi->nr_msi_region = msi->nr_irqs;
-+ break;
-+ default:
-+ dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
-+ return -EINVAL;
-+ }
-+
-+ if (of_find_property(node, "brcm,pcie-msi-inten", NULL))
-+ msi->has_inten_reg = true;
-+
-+ msi->nr_msi_vecs = msi->nr_irqs * EQ_LEN;
-+ msi->bitmap = devm_kcalloc(pcie->dev, BITS_TO_LONGS(msi->nr_msi_vecs),
-+ sizeof(*msi->bitmap), GFP_KERNEL);
-+ if (!msi->bitmap)
-+ return -ENOMEM;
-+
-+ msi->grps = devm_kcalloc(pcie->dev, msi->nr_irqs, sizeof(*msi->grps),
-+ GFP_KERNEL);
-+ if (!msi->grps)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < msi->nr_irqs; i++) {
-+ unsigned int irq = irq_of_parse_and_map(node, i);
-+
-+ if (!irq) {
-+ dev_err(pcie->dev, "unable to parse/map interrupt\n");
-+ ret = -ENODEV;
-+ goto free_irqs;
-+ }
-+ msi->grps[i].gic_irq = irq;
-+ msi->grps[i].msi = msi;
-+ msi->grps[i].eq = i;
-+ }
-+
-+ /* Reserve memory for event queue and make sure memories are zeroed */
-+ msi->eq_cpu = dma_zalloc_coherent(pcie->dev,
-+ msi->nr_eq_region * EQ_MEM_REGION_SIZE,
-+ &msi->eq_dma, GFP_KERNEL);
-+ if (!msi->eq_cpu) {
-+ ret = -ENOMEM;
-+ goto free_irqs;
-+ }
-+
-+ ret = iproc_msi_alloc_domains(node, msi);
-+ if (ret) {
-+ dev_err(pcie->dev, "failed to create MSI domains\n");
-+ goto free_eq_dma;
-+ }
-+
-+ for_each_online_cpu(cpu) {
-+ ret = iproc_msi_irq_setup(msi, cpu);
-+ if (ret)
-+ goto free_msi_irq;
-+ }
-+
-+ iproc_msi_enable(msi);
-+
-+ return 0;
-+
-+free_msi_irq:
-+ for_each_online_cpu(cpu)
-+ iproc_msi_irq_free(msi, cpu);
-+ iproc_msi_free_domains(msi);
-+
-+free_eq_dma:
-+ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE,
-+ msi->eq_cpu, msi->eq_dma);
-+
-+free_irqs:
-+ for (i = 0; i < msi->nr_irqs; i++) {
-+ if (msi->grps[i].gic_irq)
-+ irq_dispose_mapping(msi->grps[i].gic_irq);
-+ }
-+ pcie->msi = NULL;
-+ return ret;
-+}
-+EXPORT_SYMBOL(iproc_msi_init);
-+
-+void iproc_msi_exit(struct iproc_pcie *pcie)
-+{
-+ struct iproc_msi *msi = pcie->msi;
-+ unsigned int i, cpu;
-+
-+ if (!msi)
-+ return;
-+
-+ iproc_msi_disable(msi);
-+
-+ for_each_online_cpu(cpu)
-+ iproc_msi_irq_free(msi, cpu);
-+
-+ iproc_msi_free_domains(msi);
-+
-+ dma_free_coherent(pcie->dev, msi->nr_eq_region * EQ_MEM_REGION_SIZE,
-+ msi->eq_cpu, msi->eq_dma);
-+
-+ for (i = 0; i < msi->nr_irqs; i++) {
-+ if (msi->grps[i].gic_irq)
-+ irq_dispose_mapping(msi->grps[i].gic_irq);
-+ }
-+}
-+EXPORT_SYMBOL(iproc_msi_exit);
---- a/drivers/pci/host/pcie-iproc-platform.c
-+++ b/drivers/pci/host/pcie-iproc-platform.c
-@@ -71,6 +71,7 @@ static int iproc_pcie_pltfm_probe(struct
- dev_err(pcie->dev, "unable to map controller registers\n");
- return -ENOMEM;
- }
-+ pcie->base_addr = reg.start;
-
- if (of_property_read_bool(np, "brcm,pcie-ob")) {
- u32 val;
---- a/drivers/pci/host/pcie-iproc.c
-+++ b/drivers/pci/host/pcie-iproc.c
-@@ -440,6 +440,26 @@ static int iproc_pcie_map_ranges(struct
- return 0;
- }
-
-+static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
-+{
-+ struct device_node *msi_node;
-+
-+ msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
-+ if (!msi_node)
-+ return -ENODEV;
-+
-+ /*
-+ * If another MSI controller is being used, the call below should fail
-+ * but that is okay
-+ */
-+ return iproc_msi_init(pcie, msi_node);
-+}
-+
-+static void iproc_pcie_msi_disable(struct iproc_pcie *pcie)
-+{
-+ iproc_msi_exit(pcie);
-+}
-+
- int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
- {
- int ret;
-@@ -507,6 +527,10 @@ int iproc_pcie_setup(struct iproc_pcie *
-
- iproc_pcie_enable(pcie);
-
-+ if (IS_ENABLED(CONFIG_PCI_MSI))
-+ if (iproc_pcie_msi_enable(pcie))
-+ dev_info(pcie->dev, "not using iProc MSI\n");
-+
- pci_scan_child_bus(bus);
- pci_assign_unassigned_bus_resources(bus);
- pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
-@@ -531,6 +555,8 @@ int iproc_pcie_remove(struct iproc_pcie
- pci_stop_root_bus(pcie->root_bus);
- pci_remove_root_bus(pcie->root_bus);
-
-+ iproc_pcie_msi_disable(pcie);
-+
- phy_power_off(pcie->phy);
- phy_exit(pcie->phy);
-
---- a/drivers/pci/host/pcie-iproc.h
-+++ b/drivers/pci/host/pcie-iproc.h
-@@ -41,6 +41,8 @@ struct iproc_pcie_ob {
- resource_size_t window_size;
- };
-
-+struct iproc_msi;
-+
- /**
- * iProc PCIe device
- *
-@@ -48,19 +50,21 @@ struct iproc_pcie_ob {
- * @type: iProc PCIe interface type
- * @reg_offsets: register offsets
- * @base: PCIe host controller I/O register base
-+ * @base_addr: PCIe host controller register base physical address
- * @sysdata: Per PCI controller data (ARM-specific)
- * @root_bus: pointer to root bus
- * @phy: optional PHY device that controls the Serdes
-- * @irqs: interrupt IDs
- * @map_irq: function callback to map interrupts
-- * @need_ob_cfg: indidates SW needs to configure the outbound mapping window
-+ * @need_ob_cfg: indicates SW needs to configure the outbound mapping window
- * @ob: outbound mapping parameters
-+ * @msi: MSI data
- */
- struct iproc_pcie {
- struct device *dev;
- enum iproc_pcie_type type;
- const u16 *reg_offsets;
- void __iomem *base;
-+ phys_addr_t base_addr;
- #ifdef CONFIG_ARM
- struct pci_sys_data sysdata;
- #endif
-@@ -69,9 +73,24 @@ struct iproc_pcie {
- int (*map_irq)(const struct pci_dev *, u8, u8);
- bool need_ob_cfg;
- struct iproc_pcie_ob ob;
-+ struct iproc_msi *msi;
- };
-
- int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res);
- int iproc_pcie_remove(struct iproc_pcie *pcie);
-
-+#ifdef CONFIG_PCIE_IPROC_MSI
-+int iproc_msi_init(struct iproc_pcie *pcie, struct device_node *node);
-+void iproc_msi_exit(struct iproc_pcie *pcie);
-+#else
-+static inline int iproc_msi_init(struct iproc_pcie *pcie,
-+ struct device_node *node)
-+{
-+ return -ENODEV;
-+}
-+static inline void iproc_msi_exit(struct iproc_pcie *pcie)
-+{
-+}
-+#endif
-+
- #endif /* _PCIE_IPROC_H */
diff --git a/target/linux/bcm53xx/patches-4.4/088-PCI-iproc-Allow-multiple-devices-except-on-PAXC.patch b/target/linux/bcm53xx/patches-4.4/088-PCI-iproc-Allow-multiple-devices-except-on-PAXC.patch
deleted file mode 100644
index c33861e638..0000000000
--- a/target/linux/bcm53xx/patches-4.4/088-PCI-iproc-Allow-multiple-devices-except-on-PAXC.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 46560388c476c8471fde7712c10f9fad8d0d1875 Mon Sep 17 00:00:00 2001
-From: Ray Jui <rjui@broadcom.com>
-Date: Wed, 27 Jan 2016 16:52:24 -0600
-Subject: [PATCH] PCI: iproc: Allow multiple devices except on PAXC
-
-Commit 943ebae781f5 ("PCI: iproc: Add PAXC interface support") only allowed
-device 0, which is a regression on BCMA-based platforms.
-
-All systems support only one device, a Root Port at 00:00.0, on the root
-bus. PAXC-based systems support only the Root Port (00:00.0) and a single
-device (with multiple functions) below it, e.g., 01:00.0, 01:00.1, etc.
-Non-PAXC systems support arbitrary devices below the Root Port.
-
-[bhelgaas: changelog, fold in removal of MAX_NUM_PAXC_PF check]
-Fixes: 943ebae781f5 ("PCI: iproc: Add PAXC interface support")
-Reported-by: Rafal Milecki <zajec5@gmail.com>
-Signed-off-by: Ray Jui <rjui@broadcom.com>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
----
- drivers/pci/host/pcie-iproc.c | 29 +++++++++++------------------
- 1 file changed, 11 insertions(+), 18 deletions(-)
-
---- a/drivers/pci/host/pcie-iproc.c
-+++ b/drivers/pci/host/pcie-iproc.c
-@@ -64,7 +64,6 @@
- #define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
-
- #define MAX_NUM_OB_WINDOWS 2
--#define MAX_NUM_PAXC_PF 4
-
- #define IPROC_PCIE_REG_INVALID 0xffff
-
-@@ -170,20 +169,6 @@ static inline void iproc_pcie_ob_write(s
- writel(val, pcie->base + offset + (window * 8));
- }
-
--static inline bool iproc_pcie_device_is_valid(struct iproc_pcie *pcie,
-- unsigned int slot,
-- unsigned int fn)
--{
-- if (slot > 0)
-- return false;
--
-- /* PAXC can only support limited number of functions */
-- if (pcie->type == IPROC_PCIE_PAXC && fn >= MAX_NUM_PAXC_PF)
-- return false;
--
-- return true;
--}
--
- /**
- * Note access to the configuration registers are protected at the higher layer
- * by 'pci_lock' in drivers/pci/access.c
-@@ -199,11 +184,11 @@ static void __iomem *iproc_pcie_map_cfg_
- u32 val;
- u16 offset;
-
-- if (!iproc_pcie_device_is_valid(pcie, slot, fn))
-- return NULL;
--
- /* root complex access */
- if (busno == 0) {
-+ if (slot > 0 || fn > 0)
-+ return NULL;
-+
- iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
- where & CFG_IND_ADDR_MASK);
- offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
-@@ -213,6 +198,14 @@ static void __iomem *iproc_pcie_map_cfg_
- return (pcie->base + offset);
- }
-
-+ /*
-+ * PAXC is connected to an internally emulated EP within the SoC. It
-+ * allows only one device.
-+ */
-+ if (pcie->type == IPROC_PCIE_PAXC)
-+ if (slot > 0)
-+ return NULL;
-+
- /* EP device access */
- val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
- (slot << CFG_ADDR_DEV_NUM_SHIFT) |
diff --git a/target/linux/bcm53xx/patches-4.4/089-clk-bcm-Add-driver-for-BCM53573-ILP-clock.patch b/target/linux/bcm53xx/patches-4.4/089-clk-bcm-Add-driver-for-BCM53573-ILP-clock.patch
deleted file mode 100644
index b3f8b9107b..0000000000
--- a/target/linux/bcm53xx/patches-4.4/089-clk-bcm-Add-driver-for-BCM53573-ILP-clock.patch
+++ /dev/null
@@ -1,224 +0,0 @@
-From bd8dd593f7d2211f2273e05741d157b0c8d020ae Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 13 Sep 2016 09:06:04 +0200
-Subject: [PATCH] clk: bcm: Add driver for BCM53573 ILP clock
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This clock is present on BCM53573 devices (including BCM47189) that use
-Cortex-A7. ILP is a part of PMU (Power Management Unit) multi-function
-device so we use syscon (and regmap) for it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-[sboyd@codeaurora.org: Remove 0 from clk_init_data to silence sparse]
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../bindings/clock/brcm,bcm53573-ilp.txt | 36 +++++
- drivers/clk/bcm/Makefile | 1 +
- drivers/clk/bcm/clk-bcm53573-ilp.c | 148 +++++++++++++++++++++
- 3 files changed, 185 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
- create mode 100644 drivers/clk/bcm/clk-bcm53573-ilp.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/brcm,bcm53573-ilp.txt
-@@ -0,0 +1,36 @@
-+Broadcom BCM53573 ILP clock
-+===========================
-+
-+This binding uses the common clock binding:
-+ Documentation/devicetree/bindings/clock/clock-bindings.txt
-+
-+This binding is used for ILP clock (sometimes referred as "slow clock")
-+on Broadcom BCM53573 devices using Cortex-A7 CPU.
-+
-+ILP's rate has to be calculated on runtime and it depends on ALP clock
-+which has to be referenced.
-+
-+This clock is part of PMU (Power Management Unit), a Broadcom's device
-+handing power-related aspects. Its node must be sub-node of the PMU
-+device.
-+
-+Required properties:
-+- compatible: "brcm,bcm53573-ilp"
-+- clocks: has to reference an ALP clock
-+- #clock-cells: should be <0>
-+- clock-output-names: from common clock bindings, should contain clock
-+ name
-+
-+Example:
-+
-+pmu@18012000 {
-+ compatible = "simple-mfd", "syscon";
-+ reg = <0x18012000 0x00001000>;
-+
-+ ilp {
-+ compatible = "brcm,bcm53573-ilp";
-+ clocks = <&alp>;
-+ #clock-cells = <0>;
-+ clock-output-names = "ilp";
-+ };
-+};
---- a/drivers/clk/bcm/Makefile
-+++ b/drivers/clk/bcm/Makefile
-@@ -4,6 +4,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281
- obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
- obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
- obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
-+obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o
- obj-$(CONFIG_COMMON_CLK_IPROC) += clk-ns2.o
- obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
- obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
---- /dev/null
-+++ b/drivers/clk/bcm/clk-bcm53573-ilp.c
-@@ -0,0 +1,148 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+
-+#define PMU_XTAL_FREQ_RATIO 0x66c
-+#define XTAL_ALP_PER_4ILP 0x00001fff
-+#define XTAL_CTL_EN 0x80000000
-+#define PMU_SLOW_CLK_PERIOD 0x6dc
-+
-+struct bcm53573_ilp {
-+ struct clk_hw hw;
-+ struct regmap *regmap;
-+};
-+
-+static int bcm53573_ilp_enable(struct clk_hw *hw)
-+{
-+ struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
-+
-+ regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0x10199);
-+ regmap_write(ilp->regmap, 0x674, 0x10000);
-+
-+ return 0;
-+}
-+
-+static void bcm53573_ilp_disable(struct clk_hw *hw)
-+{
-+ struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
-+
-+ regmap_write(ilp->regmap, PMU_SLOW_CLK_PERIOD, 0);
-+ regmap_write(ilp->regmap, 0x674, 0);
-+}
-+
-+static unsigned long bcm53573_ilp_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct bcm53573_ilp *ilp = container_of(hw, struct bcm53573_ilp, hw);
-+ struct regmap *regmap = ilp->regmap;
-+ u32 last_val, cur_val;
-+ int sum = 0, num = 0, loop_num = 0;
-+ int avg;
-+
-+ /* Enable measurement */
-+ regmap_write(regmap, PMU_XTAL_FREQ_RATIO, XTAL_CTL_EN);
-+
-+ /* Read initial value */
-+ regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &last_val);
-+ last_val &= XTAL_ALP_PER_4ILP;
-+
-+ /*
-+ * At minimum we should loop for a bit to let hardware do the
-+ * measurement. This isn't very accurate however, so for a better
-+ * precision lets try getting 20 different values for and use average.
-+ */
-+ while (num < 20) {
-+ regmap_read(regmap, PMU_XTAL_FREQ_RATIO, &cur_val);
-+ cur_val &= XTAL_ALP_PER_4ILP;
-+
-+ if (cur_val != last_val) {
-+ /* Got different value, use it */
-+ sum += cur_val;
-+ num++;
-+ loop_num = 0;
-+ last_val = cur_val;
-+ } else if (++loop_num > 5000) {
-+ /* Same value over and over, give up */
-+ sum += cur_val;
-+ num++;
-+ break;
-+ }
-+
-+ cpu_relax();
-+ }
-+
-+ /* Disable measurement to save power */
-+ regmap_write(regmap, PMU_XTAL_FREQ_RATIO, 0x0);
-+
-+ avg = sum / num;
-+
-+ return parent_rate * 4 / avg;
-+}
-+
-+static const struct clk_ops bcm53573_ilp_clk_ops = {
-+ .enable = bcm53573_ilp_enable,
-+ .disable = bcm53573_ilp_disable,
-+ .recalc_rate = bcm53573_ilp_recalc_rate,
-+};
-+
-+static void bcm53573_ilp_init(struct device_node *np)
-+{
-+ struct bcm53573_ilp *ilp;
-+ struct clk_init_data init = { };
-+ const char *parent_name;
-+ int err;
-+
-+ ilp = kzalloc(sizeof(*ilp), GFP_KERNEL);
-+ if (!ilp)
-+ return;
-+
-+ parent_name = of_clk_get_parent_name(np, 0);
-+ if (!parent_name) {
-+ err = -ENOENT;
-+ goto err_free_ilp;
-+ }
-+
-+ ilp->regmap = syscon_node_to_regmap(of_get_parent(np));
-+ if (IS_ERR(ilp->regmap)) {
-+ err = PTR_ERR(ilp->regmap);
-+ goto err_free_ilp;
-+ }
-+
-+ init.name = np->name;
-+ init.ops = &bcm53573_ilp_clk_ops;
-+ init.parent_names = &parent_name;
-+ init.num_parents = 1;
-+
-+ ilp->hw.init = &init;
-+ err = clk_hw_register(NULL, &ilp->hw);
-+ if (err)
-+ goto err_free_ilp;
-+
-+ err = of_clk_add_hw_provider(np, of_clk_hw_simple_get, &ilp->hw);
-+ if (err)
-+ goto err_clk_hw_unregister;
-+
-+ return;
-+
-+err_clk_hw_unregister:
-+ clk_hw_unregister(&ilp->hw);
-+err_free_ilp:
-+ kfree(ilp);
-+ pr_err("Failed to init ILP clock: %d\n", err);
-+}
-+
-+/* We need it very early for arch code, before device model gets ready */
-+CLK_OF_DECLARE(bcm53573_ilp_clk, "brcm,bcm53573-ilp", bcm53573_ilp_init);
diff --git a/target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch b/target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch
deleted file mode 100644
index 4ecb8dc693..0000000000
--- a/target/linux/bcm53xx/patches-4.4/101-use-part-parser.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -13,6 +13,8 @@
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-+
-+ linux,part-probe = "ofpart", "bcm47xxpart";
- };
- };
- };
diff --git a/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch b/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch
deleted file mode 100644
index f2d60c2f68..0000000000
--- a/target/linux/bcm53xx/patches-4.4/112-bcm53xx-sprom-add-sprom-driver.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 4e0ab3269a6d260a41a3673157753147f5f71341 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 4 May 2014 13:19:20 +0200
-Subject: [PATCH 03/17] bcm47xx-sprom: add Broadcom sprom parser driver
-
-This driver needs an nvram driver and fetches the sprom values from the
-nvram and provides it to any other driver. The calibration data for the
-wifi chip the mac address and some more board description data is
-stores in the sprom.
-
-This is based on a copy of arch/mips/bcm47xx/sprom.c and my plan is to
-make the bcm47xx MIPS SoCs also use this driver some time later.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- .../devicetree/bindings/misc/bcm47xx-sprom.txt | 16 +
- drivers/misc/Kconfig | 11 +
- drivers/misc/Makefile | 1 +
- drivers/misc/bcm47xx-sprom.c | 690 +++++++++++++++++++++
- 4 files changed, 718 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/misc/bcm47xx-sprom.txt
- create mode 100644 drivers/misc/bcm47xx-sprom.c
-
---- a/drivers/firmware/broadcom/Kconfig
-+++ b/drivers/firmware/broadcom/Kconfig
-@@ -9,3 +9,14 @@ config BCM47XX_NVRAM
- This driver provides an easy way to get value of requested parameter.
- It simply reads content of NVRAM and parses it. It doesn't control any
- hardware part itself.
-+
-+config BCM47XX_SPROM
-+ bool "Broadcom SPROM driver"
-+ depends on BCM47XX_NVRAM
-+ help
-+ Broadcom devices store configuration data in SPROM. Accessing it is
-+ specific to the bus host type, e.g. PCI(e) devices have it mapped in
-+ a PCI BAR.
-+ In case of SoC devices SPROM content is stored on a flash used by
-+ bootloader firmware CFE. This driver provides method to ssb and bcma
-+ drivers to read SPROM on SoC.
---- a/drivers/firmware/broadcom/Makefile
-+++ b/drivers/firmware/broadcom/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
-+obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
diff --git a/target/linux/bcm53xx/patches-4.4/140-mtd-brcmnand-set-initial-ECC-params-based-on-info-fr.patch b/target/linux/bcm53xx/patches-4.4/140-mtd-brcmnand-set-initial-ECC-params-based-on-info-fr.patch
deleted file mode 100644
index 4eba839d91..0000000000
--- a/target/linux/bcm53xx/patches-4.4/140-mtd-brcmnand-set-initial-ECC-params-based-on-info-fr.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From eff78bc2c385f592294278582f38ad5fa4ed2b34 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 27 Jan 2016 08:47:03 +0100
-Subject: [PATCH] mtd: brcmnand: set initial ECC params based on info from HW
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far we were depending on nand_dt_init getting ECC info from DT and
-setting it in ECC struct. It is possible to simply read this info from
-hardware registers which makes adding support for new hardware way
-easier (no more guessing & trying all combinations).
-Please note it still gives a precedence to DT which was overwrite
-whatever was initially set by the driver.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-It took me hours to figure out how to setup NAND on my D-Link DIR-885L.
-This should be very helpful for ppl adding new devices support.
----
- drivers/mtd/nand/brcmnand/brcmnand.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/mtd/nand/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
-@@ -645,6 +645,17 @@ static inline u32 brcmnand_ecc_level_mas
- return mask << NAND_ACC_CONTROL_ECC_SHIFT;
- }
-
-+static int brcmnand_get_ecc_strength(struct brcmnand_host *host)
-+{
-+ struct brcmnand_controller *ctrl = host->ctrl;
-+ u32 mask = brcmnand_ecc_level_mask(ctrl);
-+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
-+ BRCMNAND_CS_ACC_CONTROL);
-+
-+ return (nand_readreg(ctrl, acc_control_offs) & mask) >>
-+ NAND_ACC_CONTROL_ECC_SHIFT;
-+}
-+
- static void brcmnand_set_ecc_enabled(struct brcmnand_host *host, int en)
- {
- struct brcmnand_controller *ctrl = host->ctrl;
-@@ -1990,6 +2001,9 @@ static int brcmnand_init_cs(struct brcmn
- nand_writereg(ctrl, cfg_offs,
- nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH);
-
-+ chip->ecc.strength = brcmnand_get_ecc_strength(host);
-+ chip->ecc.size = brcmnand_get_sector_size_1k(host) ? 1024 : 512;
-+
- if (nand_scan_ident(mtd, 1, NULL))
- return -ENXIO;
-
diff --git a/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
deleted file mode 100644
index f5a7f37a49..0000000000
--- a/target/linux/bcm53xx/patches-4.4/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c | 6 +++++
- drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h | 1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -38,12 +38,18 @@ static const struct xhci_driver_override
-
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
-+ struct platform_device *pdev = to_platform_device(dev);
-+ struct device_node *node = pdev->dev.of_node;
-+
- /*
- * As of now platform drivers don't provide MSI support so we ensure
- * here that the generic code does not try to make a pci_dev from our
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-+
-+ if (node && of_machine_is_compatible("brcm,bcm4708"))
-+ xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
-
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -152,6 +152,49 @@ static int xhci_start(struct xhci_hcd *x
- return ret;
- }
-
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+ u32 temp;
-+
-+ /* Alloc a virt device for that slot */
-+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Ring fake doorbell for slot_id ep 0 */
-+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+ usleep_range(1000, 1500);
-+
-+ /* Read the status to check if HSE is set or not */
-+ temp = readl(&xhci->op_regs->status);
-+
-+ /* Clear HSE if set */
-+ if (temp & STS_FATAL) {
-+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+ temp &= ~0x1fff;
-+ temp |= STS_FATAL;
-+ writel(temp, &xhci->op_regs->status);
-+ usleep_range(1000, 1500);
-+ readl(&xhci->op_regs->status);
-+ }
-+
-+ /* Free virt device */
-+ xhci_free_virt_device(xhci, slot_id);
-+
-+ /* We're done if controller is already running */
-+ if (readl(&xhci->op_regs->command) & CMD_RUN)
-+ return 0;
-+
-+ return xhci_start(xhci);
-+}
-+
- /*
- * Reset a halted HC.
- *
-@@ -568,10 +611,20 @@ int xhci_init(struct usb_hcd *hcd)
-
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
-- if (xhci_start(xhci)) {
-- xhci_halt(xhci);
-- return -ENODEV;
-+ int err;
-+
-+ err = xhci_start(xhci);
-+ if (err) {
-+ err = -ENODEV;
-+ goto err_halt;
-+ }
-+
-+ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+ err = xhci_fake_doorbell(xhci, 1);
-+ if (err)
-+ goto err_halt;
- }
-+
- xhci->shared_hcd->state = HC_STATE_RUNNING;
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
-@@ -581,6 +634,10 @@ static int xhci_run_finished(struct xhci
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "Finished xhci_run for USB3 roothub");
- return 0;
-+
-+err_halt:
-+ xhci_halt(xhci);
-+ return err;
- }
-
- /*
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1635,6 +1635,7 @@ struct xhci_hcd {
- #define XHCI_BROKEN_STREAMS (1 << 19)
- #define XHCI_PME_STUCK_QUIRK (1 << 20)
- #define XHCI_MISSING_CAS (1 << 24)
-+#define XHCI_FAKE_DOORBELL (1 << 25)
- unsigned int num_active_eps;
- unsigned int limit_active_eps;
- /* There are two roothubs to keep track of bus suspend info for */
diff --git a/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 1c73775b43..0000000000
--- a/target/linux/bcm53xx/patches-4.4/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_C (1 << 2) /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -31,6 +31,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_flush_dcache_all
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
-
- __INIT
-
-@@ -63,7 +64,7 @@ loop2:
- ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
- THUMB( lsl r6, r9, r2 )
- THUMB( orr r11, r11, r6 ) @ factor index number into r11
-- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
-+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
- subs r9, r9, #1 @ decrement the index
- bge loop2
- subs r4, r4, #1 @ decrement the way
diff --git a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644
index c780e22d6e..0000000000
--- a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
-+ bcm4709-netgear-r7900.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R7900";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ axi@18000000 {
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
deleted file mode 100644
index 710d94f6bc..0000000000
--- a/target/linux/bcm53xx/patches-4.4/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's enough to have proper stdout-path for getting serial working but
-for some reason LEDE doesn't offer "Please press Enter to activate this
-console." unless ttyS0 is specified.
-
-This is a workaround to get serial working in LEDE.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -13,7 +13,7 @@
- model = "TP-LINK Archer C5 V2";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -14,7 +14,7 @@
- model = "Luxul ABR-4500 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -14,7 +14,7 @@
- model = "Luxul XBR-4500 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XAP-1440 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XAP-810 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
diff --git a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index 39034997fc..0000000000
--- a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -102,6 +102,12 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-+ power {
-+ label = "Power";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
- restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-4.4/400-mtd-brcmnand-stop-special-treating-ECC-strength-1-as.patch b/target/linux/bcm53xx/patches-4.4/400-mtd-brcmnand-stop-special-treating-ECC-strength-1-as.patch
deleted file mode 100644
index 4d855c7fb3..0000000000
--- a/target/linux/bcm53xx/patches-4.4/400-mtd-brcmnand-stop-special-treating-ECC-strength-1-as.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From c7af0732a25e5643979d55d304182309cff70ed9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Mon, 1 Feb 2016 12:44:34 +0100
-Subject: [PATCH] mtd: brcmnand: stop special treating ECC strength 1 (as
- Hamming)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/nand/brcmnand/brcmnand.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/nand/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
-@@ -1886,7 +1886,8 @@ static int brcmnand_setup_dev(struct brc
-
- switch (chip->ecc.size) {
- case 512:
-- if (chip->ecc.strength == 1) /* Hamming */
-+ /* FIXME: We need to use strength 1 on DIR-885L */
-+ if (0 && chip->ecc.strength == 1) /* Hamming */
- cfg->ecc_level = 15;
- else
- cfg->ecc_level = chip->ecc.strength;
diff --git a/target/linux/bcm53xx/patches-4.4/405-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch b/target/linux/bcm53xx/patches-4.4/405-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
deleted file mode 100644
index 184d7a2d89..0000000000
--- a/target/linux/bcm53xx/patches-4.4/405-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: spi-nor: detect JEDEC incompatible w25q128 using 0x90
- command
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some w25q128 chipsets don't support RDID (0x9f) command, they reply with
-0xff-s only. To suppose such flashes fallback to the 0x90 command.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -875,6 +875,18 @@ static const struct flash_info *spi_nor_
- }
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
- id[0], id[1], id[2]);
-+
-+ tmp = nor->read_reg(nor, 0x90, id, SPI_NOR_MAX_ID_LEN);
-+ if (tmp < 0) {
-+ dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
-+ return ERR_PTR(tmp);
-+ }
-+ dev_info(nor->dev, "using Read Manufacturer / Device ID command (0x%02x) returned %02x %02x\n",
-+ 0x90, id[0x03], id[0x04]);
-+ if (id[0x03] == 0xef && id[0x04] == 0x17) {
-+ return spi_nor_match_id("w25q128");
-+ }
-+
- return ERR_PTR(-ENODEV);
- }
-
diff --git a/target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index 636e63eb29..0000000000
--- a/target/linux/bcm53xx/patches-4.4/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c | 4 ++++
- drivers/mtd/ubi/ubi.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
- static struct ubi_ec_hdr *ech;
- static struct ubi_vid_hdr *vidh;
-
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
- * add_to_list - add physical eraseblock to a list.
- * @ai: attaching information
-@@ -1425,6 +1428,8 @@ int ubi_attach(struct ubi_device *ubi, i
- if (!ai)
- return -ENOMEM;
-
-+ erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- /* On small flash devices we disable fastmap in any case. */
- if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -755,6 +755,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- }
-
- magic = be32_to_cpu(ec_hdr->magic);
-+ if (magic == 0xdeadc0de)
-+ erase_all_next = true;
-+ if (erase_all_next)
-+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- if (magic != UBI_EC_HDR_MAGIC) {
- if (mtd_is_eccerr(read_err))
- return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -783,6 +783,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
-
- /* attach.c */
-+extern bool erase_all_next;
- int ubi_add_to_av(struct ubi_device *ubi, struct ubi_attach_info *ai, int pnum,
- int ec, const struct ubi_vid_hdr *vid_hdr, int bitflips);
- struct ubi_ainf_volume *ubi_find_av(const struct ubi_attach_info *ai,
diff --git a/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
deleted file mode 100644
index 91bb4fae11..0000000000
--- a/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 14:13:28 +0200
-Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/phy/b53/b53_common.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/b53/b53_common.c
-+++ b/drivers/net/phy/b53/b53_common.c
-@@ -28,6 +28,7 @@
- #include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/platform_data/b53.h>
-+#include <linux/of.h>
-
- #include "b53_regs.h"
- #include "b53_priv.h"
-@@ -1579,6 +1580,28 @@ static int b53_switch_init(struct b53_de
- return ret;
- }
-
-+ /* Set correct CPU port */
-+ if (of_machine_is_compatible("asus,rt-ac87u"))
-+ sw_dev->cpu_port = 7;
-+ else if (of_machine_is_compatible("netgear,r7900"))
-+ sw_dev->cpu_port = 8;
-+ else if (of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 8;
-+ else if (of_machine_is_compatible("netgear,r8500"))
-+ sw_dev->cpu_port = 8;
-+
-+ /* Enable extra ports */
-+ if (of_machine_is_compatible("tenda,ac9"))
-+ dev->enabled_ports |= BIT(5);
-+
-+ /*
-+ * Workaround for devices using port 8 (connected to the 3rd iface).
-+ * For some reason it doesn't work (no packets on eth2).
-+ */
-+ if (of_machine_is_compatible("netgear,r7900") ||
-+ of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 5;
-+
- dev->enabled_ports |= BIT(sw_dev->cpu_port);
- sw_dev->ports = fls(dev->enabled_ports);
-
diff --git a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch b/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch
deleted file mode 100644
index 0223ab4776..0000000000
--- a/target/linux/bcm53xx/patches-4.4/901-mtd-bcm47xxpart-add-device-specific-workarounds.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: bcm47xxpart: add device specific workarounds
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -15,6 +15,7 @@
- #include <linux/slab.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-
- #include <uapi/linux/magic.h>
-
-@@ -249,6 +250,36 @@ static int bcm47xxpart_parse(struct mtd_
- break;
- }
-
-+ /*
-+ * Device specific workarounds (hacks). We should use DT to
-+ * define partitions but we need a working TRX firmware splitter
-+ * first.
-+ */
-+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
-+ /*
-+ * "asus" partition uses JFFS2 which we don't detect and
-+ * we don't want to as this could affect other devices.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
-+ continue;
-+ } else if (of_machine_is_compatible("tplink,archer-c5-v2") && offset == 0xe40000) {
-+ /*
-+ * There is a whole set of partitions (not even listed
-+ * by original firmware): "default-mac", "pin",
-+ * "partition-table", etc.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
-+ continue;
-+ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) {
-+ /*
-+ * There is a whole set of partitions (not even listed
-+ * by original firmware): "default-mac", "pin",
-+ * "partition-table", etc.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
-+ continue;
-+ }
-+
- /* Read beginning of the block */
- err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
- &bytes_read, (uint8_t *)buf);
diff --git a/target/linux/bcm53xx/patches-4.4/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-4.4/905-BCM53573-minor-hacks.patch
deleted file mode 100644
index c59048d23f..0000000000
--- a/target/linux/bcm53xx/patches-4.4/905-BCM53573-minor-hacks.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -48,6 +48,15 @@
- };
- };
-
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <GIC_PPI 13 0>,
-+ <GIC_PPI 14 0>,
-+ <GIC_PPI 11 0>,
-+ <GIC_PPI 10 0>;
-+ clocks = <&ilp>;
-+ };
-+
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -348,14 +348,6 @@ static int bcma_register_devices(struct
- }
- #endif
-
--#ifdef CONFIG_BCMA_SFLASH
-- if (bus->drv_cc.sflash.present) {
-- err = platform_device_register(&bcma_sflash_dev);
-- if (err)
-- bcma_err(bus, "Error registering serial flash\n");
-- }
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- if (bus->drv_cc.nflash.present) {
- err = platform_device_register(&bcma_nflash_dev);
-@@ -436,6 +428,14 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_register_core(bus, core);
- }
-
-+#ifdef CONFIG_BCMA_SFLASH
-+ if (bus->drv_cc.sflash.present) {
-+ err = platform_device_register(&bcma_sflash_dev);
-+ if (err)
-+ bcma_err(bus, "Error registering serial flash\n");
-+ }
-+#endif
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -14,6 +14,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/interrupt.h>
-@@ -376,6 +377,16 @@ arch_timer_detect_rate(void __iomem *cnt
- arch_timer_rate = arch_timer_get_cntfrq();
- }
-
-+ /* Get clk rate through clk driver if present */
-+ if (!arch_timer_rate) {
-+ struct clk *clk = of_clk_get(np, 0);
-+
-+ if (!IS_ERR(clk)) {
-+ if (!clk_prepare_enable(clk))
-+ arch_timer_rate = clk_get_rate(clk);
-+ }
-+ }
-+
- /* Check the timer frequency. */
- if (arch_timer_rate == 0)
- pr_warn("Architected timer frequency not available\n");
diff --git a/target/linux/bcm53xx/patches-4.9/030-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch b/target/linux/bcm53xx/patches-4.9/030-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
deleted file mode 100644
index 2c33f5365a..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0001-ARM-BCM5301X-Add-DT-for-Netgear-R8500.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From b5057e498da8211ac3cc8ff5780034e5da61d077 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 23 Aug 2016 08:40:32 +0200
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R8500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8500 is another BCM47094 device, it just has three BCM4366
-wireless chipsets. It's a very standard DT with mostly GPIO devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 104 +++++++++++++++++++++++++++
- 2 files changed, 105 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012er.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -0,0 +1,104 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Netgear R8500";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power0 {
-+ label = "bcm53xx:white:power";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:amber:power";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz-1 {
-+ label = "bcm53xx:white:5ghz-1";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz-2 {
-+ label = "bcm53xx:white:5ghz-2";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:white:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:white:usb2";
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:white:usb3";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ brightness {
-+ label = "Backlight";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/030-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch b/target/linux/bcm53xx/patches-4.9/030-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch
deleted file mode 100644
index 53ea1c8ade..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0002-ARM-BCM5301X-Add-basic-dts-for-BCM53573-based-Tenda-.patch
+++ /dev/null
@@ -1,264 +0,0 @@
-From 21c29be6a69d3ef4f5a2e16272deb4845f8208ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Tue, 23 Aug 2016 07:37:43 +0200
-Subject: [PATCH] ARM: BCM5301X: Add basic dts for BCM53573 based Tenda AC9
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM53573 seems to be low priced alternative for Northstar chipsts. It
-uses single core Cortex-A7 and doesn't have SDU or local (TWD) timer. It
-was also stripped out of independent SPI controller and 2 GMACs.
-
-DTS for Tenda AC9 isn't completed yet. It misses e.g. switch entry (we
-still need some b53 fixes) and probably some clocks. It adds support for
-basic features however and can be improved later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 74 ++++++++++++++++
- arch/arm/boot/dts/bcm53573.dtsi | 147 +++++++++++++++++++++++++++++++
- 3 files changed, 223 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-tenda-ac9.dts
- create mode 100644 arch/arm/boot/dts/bcm53573.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -92,6 +92,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm94709.dtb \
- bcm953012er.dtb \
- bcm953012k.dtb
-+dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-tenda-ac9.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -0,0 +1,74 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Tenda AC9";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb {
-+ label = "bcm53xx:blue:usb";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:blue:system";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -0,0 +1,147 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include "skeleton.dtsi"
-+
-+/ {
-+ interrupt-parent = <&gic>;
-+
-+ chosen {
-+ stdout-path = &uart0;
-+ };
-+
-+ cpus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a7";
-+ reg = <0x0>;
-+ };
-+ };
-+
-+ mpcore {
-+ compatible = "simple-bus";
-+ ranges = <0x00000000 0x18310000 0x00008000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ gic: interrupt-controller@1000 {
-+ compatible = "arm,cortex-a7-gic";
-+ #interrupt-cells = <3>;
-+ #address-cells = <0>;
-+ interrupt-controller;
-+ reg = <0x1000 0x1000>,
-+ <0x2000 0x0100>;
-+ };
-+ };
-+
-+ clocks {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges;
-+
-+ alp: oscillator {
-+ #clock-cells = <0>;
-+ compatible = "fixed-clock";
-+ clock-frequency = <40000000>;
-+ };
-+ };
-+
-+ axi@18000000 {
-+ compatible = "brcm,bus-axi";
-+ reg = <0x18000000 0x1000>;
-+ ranges = <0x00000000 0x18000000 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* ChipCommon */
-+ <0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* IEEE 802.11 0 */
-+ <0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* PCIe Controller 0 */
-+ <0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* USB 2.0 Controller */
-+ <0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 0 */
-+ <0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* IEEE 802.11 1 */
-+ <0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ chipcommon: chipcommon@0 {
-+ compatible = "simple-bus";
-+ reg = <0x00000000 0x1000>;
-+ ranges;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ uart0: serial@0300 {
-+ compatible = "ns16550a";
-+ reg = <0x0300 0x100>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&alp>;
-+ status = "okay";
-+ };
-+ };
-+
-+ usb2: usb2@4000 {
-+ reg = <0x4000 0x1000>;
-+ ranges;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ ehci: ehci@4000 {
-+ compatible = "generic-ehci";
-+ reg = <0x4000 0x1000>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ohci: ohci@d000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ohci";
-+ reg = <0xd000 0x1000>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+ };
-+
-+ gmac0: ethernet@5000 {
-+ reg = <0x5000 0x1000>;
-+ };
-+
-+ gmac1: ethernet@b000 {
-+ reg = <0xb000 0x1000>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/030-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch b/target/linux/bcm53xx/patches-4.9/030-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
deleted file mode 100644
index 43c4574db1..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0003-ARM-BCM5301X-Add-separated-DTS-include-file-for-BCM4.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 345fd105ff676ef672d1e41b31165b47aa040dab Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 22:58:32 +0200
-Subject: [PATCH] ARM: BCM5301X: Add separated DTS include file for BCM47094
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Use it to store BCM47094 specific properties/values and avoid repeating
-them in device DTS files.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +--
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 +--
- arch/arm/boot/dts/bcm47094.dtsi | 11 +++++++++++
- 3 files changed, 13 insertions(+), 4 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm47094.dtsi
-
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm47094.dtsi"
- #include "bcm5301x-nand-cs0-bch1.dtsi"
-
- / {
-@@ -107,7 +107,6 @@
-
- &uart0 {
- status = "okay";
-- clock-frequency = <125000000>;
- };
-
- &usb3 {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -6,7 +6,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm47094.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
-@@ -100,5 +100,4 @@
-
- &uart0 {
- status = "okay";
-- clock-frequency = <125000000>;
- };
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -0,0 +1,11 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm4708.dtsi"
-+
-+&uart0 {
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/030-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch b/target/linux/bcm53xx/patches-4.9/030-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
deleted file mode 100644
index 65dc796e0d..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0004-ARM-BCM5301X-Enable-UART-on-Netgear-R8000.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 3ede027b3dce2fca07350b7587c7c8f44706c94c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 22:58:33 +0200
-Subject: [PATCH] ARM: BCM5301X: Enable UART on Netgear R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It was tested by LEDE users, all we need is to adjust clock frequency.
-While we're at it create a separated DTS include file to share code with
-other BCM4709 devices easier.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 +-
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 2 +-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 6 +++++-
- arch/arm/boot/dts/bcm4709.dtsi | 11 +++++++++++
- 5 files changed, 19 insertions(+), 4 deletions(-)
- create mode 100644 arch/arm/boot/dts/bcm4709.dtsi
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -9,7 +9,7 @@
-
- /dts-v1/;
-
--#include "bcm4708.dtsi"
-+#include "bcm4709.dtsi"
- #include "bcm5301x-nand-cs0-bch8.dtsi"
-
- / {
-@@ -107,6 +107,10 @@
- };
- };
-
-+&uart0 {
-+ status = "okay";
-+};
-+
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -0,0 +1,11 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm4708.dtsi"
-+
-+&uart0 {
-+ clock-frequency = <125000000>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/030-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch b/target/linux/bcm53xx/patches-4.9/030-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
deleted file mode 100644
index 73bc90e6a1..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0005-ARM-BCM5301X-Specify-USB-3.0-PHY-in-DT.patch
+++ /dev/null
@@ -1,51 +0,0 @@
-From 5b92db97f4ae345bd6f045c9427471680a7fe2e7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 21 Sep 2016 22:58:34 +0200
-Subject: [PATCH] ARM: BCM5301X: Specify USB 3.0 PHY in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Driver for Northstar USB 3.0 PHY has been recently added under the name
-phy-bcm-ns-usb3. Add binding for it into the DT files.
-The only slightly tricky part is BCM47094 which uses different PHY
-version and requires different compatible value.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094.dtsi | 6 ++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 7 +++++++
- 2 files changed, 13 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -6,6 +6,12 @@
-
- #include "bcm4708.dtsi"
-
-+/ {
-+ usb3_phy: usb3-phy {
-+ compatible = "brcm,ns-bx-usb3-phy";
-+ };
-+};
-+
- &uart0 {
- clock-frequency = <125000000>;
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -149,6 +149,13 @@
- clock-names = "phy-ref-clk";
- };
-
-+ usb3_phy: usb3-phy {
-+ compatible = "brcm,ns-ax-usb3-phy";
-+ reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
-+ reg-names = "dmp", "ccb-mii";
-+ #phy-cells = <0>;
-+ };
-+
- axi@18000000 {
- compatible = "brcm,bus-axi";
- reg = <0x18000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-4.9/030-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch b/target/linux/bcm53xx/patches-4.9/030-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
deleted file mode 100644
index 83aa895156..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0006-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1510.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 46daccf62d1651bf8b09978478ca6465a7a81f47 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Tue, 27 Sep 2016 11:27:10 -0600
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1510
-
-Luxul XAP-1510 is an AP device based on BCM4708 SoC with 2 x BCM4360
-chipsets on PCB connected using PCIe.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 64 ++++++++++++++++++++++++++++
- 2 files changed, 65 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac56u.dtb \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
-+ bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
- bcm4708-netgear-r6300-v2.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -0,0 +1,64 @@
-+/*
-+ * Copyright 2016 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1510v1", "brcm,bcm4708";
-+ model = "Luxul XAP-1510 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch b/target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
deleted file mode 100644
index 13b04febec..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0007-ARM-BCM5301X-Add-DT-for-Luxul-XWR-3100.patch
+++ /dev/null
@@ -1,159 +0,0 @@
-From ef3bc318adeb15b38688df6a583bafea2befce43 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Tue, 27 Sep 2016 11:27:11 -0600
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-3100
-
-Luxul XWR-3100 is a wireless router based on BCM47094 SoC with two
-4366c0 FullMAC PCIe cards on the PCB. It uses NAND with BCH-4 ECC
-algorithm.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 111 ++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi | 13 +++
- 3 files changed, 125 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
- create mode 100644 arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -88,6 +88,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
- bcm94709.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -0,0 +1,111 @@
-+/*
-+ * Copyright 2016 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XWR-3100 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ lan3 {
-+ label = "bcm53xx:green:lan1";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan4 {
-+ label = "bcm53xx:green:lan0";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan1 {
-+ label = "bcm53xx:green:lan3";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ lan2 {
-+ label = "bcm53xx:green:lan2";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
-@@ -0,0 +1,13 @@
-+/*
-+ * Copyright 2016 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+#include "bcm5301x-nand-cs0.dtsi"
-+
-+&nandcs {
-+ nand-ecc-algo = "bch";
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/030-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch b/target/linux/bcm53xx/patches-4.9/030-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch
deleted file mode 100644
index b6e9c4a862..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0008-ARM-BCM53573-Specify-PMU-and-its-ILP-clock-in-the-DT.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 547f23183d9d77b51754689a71e3e58d085ccaec Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 17 Sep 2016 22:13:46 +0200
-Subject: [PATCH] ARM: BCM53573: Specify PMU and its ILP clock in the DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-ILP clock (sometimes called a "slow clock") is a part of PMU (Power
-Management Unit). There has been recently added a driver for it, so add
-a proper entry in the DT as well.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -143,5 +143,17 @@
- gmac1: ethernet@b000 {
- reg = <0xb000 0x1000>;
- };
-+
-+ pmu@12000 {
-+ compatible = "simple-mfd", "syscon";
-+ reg = <0x00012000 0x00001000>;
-+
-+ ilp: ilp {
-+ compatible = "brcm,bcm53573-ilp";
-+ clocks = <&alp>;
-+ #clock-cells = <0>;
-+ clock-output-names = "ilp";
-+ };
-+ };
- };
- };
diff --git a/target/linux/bcm53xx/patches-4.9/030-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch b/target/linux/bcm53xx/patches-4.9/030-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch
deleted file mode 100644
index e564527ca7..0000000000
--- a/target/linux/bcm53xx/patches-4.9/030-0009-ARM-BCM5301X-Add-DT-for-TP-LINK-Archer-C9-V1.patch
+++ /dev/null
@@ -1,146 +0,0 @@
-From 41182beb217c47cfbaaf26a60f22a8b3943faa61 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 13 Nov 2016 11:12:09 +0100
-Subject: [PATCH] ARM: BCM5301X: Add DT for TP-LINK Archer C9 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's BCM4709A0 based device with 16 MiB flash, 128 MiB of RAM and two
-PCIe based on-PCB BCM4360 chipsets.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 114 ++++++++++++++++++++++
- 2 files changed, 115 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
-+ bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -0,0 +1,114 @@
-+/*
-+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+
-+/ {
-+ compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "TP-LINK Archer C9 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ lan {
-+ label = "bcm53xx:blue:lan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:blue:usb3";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ usb2 {
-+ label = "bcm53xx:blue:usb2";
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-blue {
-+ label = "bcm53xx:blue:wan";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ power {
-+ label = "bcm53xx:blue:power";
-+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/032-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch b/target/linux/bcm53xx/patches-4.9/032-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch
deleted file mode 100644
index cc10d21d71..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0001-ARM-BCM5301X-Enable-UART-by-default-for-BCM4708-1-BC.patch
+++ /dev/null
@@ -1,269 +0,0 @@
-From 2b354a7c56f375ba414b9b9c96f160f5749e5e64 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 1 Dec 2016 18:40:51 +0100
-Subject: [PATCH 1/6] ARM: BCM5301X: Enable UART by default for BCM4708(1),
- BCM4709(4) & BCM53012
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Every device tested so far got UART0 (at 0x18000300) working as serial
-console. It's most likely part of reference design and all vendors use
-it that way.
-
-It seems to be easier to enable it by default and just disable it if we
-ever see a device with different hardware design.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ----
- arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 ----
- arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 4 ----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ----
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 4 ----
- arch/arm/boot/dts/bcm4708.dtsi | 4 ++++
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
- arch/arm/boot/dts/bcm47081.dtsi | 4 ++++
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 4 ----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 4 ----
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 4 ----
- arch/arm/boot/dts/bcm4709.dtsi | 1 +
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 4 ----
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 4 ----
- arch/arm/boot/dts/bcm47094.dtsi | 1 +
- arch/arm/boot/dts/bcm94708.dts | 4 ----
- arch/arm/boot/dts/bcm94709.dts | 4 ----
- arch/arm/boot/dts/bcm953012er.dts | 4 ----
- arch/arm/boot/dts/bcm953012k.dts | 1 -
- 20 files changed, 10 insertions(+), 61 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -136,10 +136,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb2 {
- vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
-@@ -55,10 +55,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
-@@ -56,10 +56,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -83,10 +83,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb3 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -119,10 +119,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -34,3 +34,7 @@
- };
-
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -122,7 +122,3 @@
- };
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -24,3 +24,7 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -100,7 +100,3 @@
- };
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -107,10 +107,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -97,10 +97,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb2 {
- vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm4709.dtsi
-+++ b/arch/arm/boot/dts/bcm4709.dtsi
-@@ -8,4 +8,5 @@
-
- &uart0 {
- clock-frequency = <125000000>;
-+ status = "okay";
- };
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -105,10 +105,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -98,10 +98,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &usb3 {
- vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -97,7 +97,3 @@
- };
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm47094.dtsi
-+++ b/arch/arm/boot/dts/bcm47094.dtsi
-@@ -14,4 +14,5 @@
-
- &uart0 {
- clock-frequency = <125000000>;
-+ status = "okay";
- };
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -50,7 +50,3 @@
- reg = <0x00000000 0x08000000>;
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -50,7 +50,3 @@
- reg = <0x00000000 0x08000000>;
- };
- };
--
--&uart0 {
-- status = "okay";
--};
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -70,10 +70,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- &spi_nor {
- status = "okay";
- };
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -54,7 +54,6 @@
-
- &uart0 {
- clock-frequency = <62499840>;
-- status = "okay";
- };
-
- &uart1 {
diff --git a/target/linux/bcm53xx/patches-4.9/032-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch b/target/linux/bcm53xx/patches-4.9/032-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch
deleted file mode 100644
index 71c1d0cc09..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0002-ARM-BCM5301X-Fix-LAN-LED-labels-for-Luxul-XWR-3100.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From 24e24f72379638d598aec5d0525ef57d5bfc5c51 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:51 +0100
-Subject: [PATCH 2/6] ARM: BCM5301X: Fix LAN LED labels for Luxul XWR-3100
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-They were named incorrectly most likely due to copy & paste mistake.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -31,13 +31,13 @@
- };
-
- lan3 {
-- label = "bcm53xx:green:lan1";
-+ label = "bcm53xx:green:lan3";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-
- lan4 {
-- label = "bcm53xx:green:lan0";
-+ label = "bcm53xx:green:lan4";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-@@ -49,7 +49,7 @@
- };
-
- lan1 {
-- label = "bcm53xx:green:lan3";
-+ label = "bcm53xx:green:lan1";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
diff --git a/target/linux/bcm53xx/patches-4.9/032-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch b/target/linux/bcm53xx/patches-4.9/032-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch
deleted file mode 100644
index 5ecda17bb5..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0003-ARM-BCM5301X-Specify-USB-controllers-in-DT.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 45d2567b4b80a3f267502419aaad3d74b745dae7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:52 +0100
-Subject: [PATCH 3/6] ARM: BCM5301X: Specify USB controllers in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are 3 separated controllers, one per USB /standard/. With PHY
-drivers in place they can be simply supported with generic drivers.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Ray Jui <ray.jui@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 33 ++++++++++++++++++++++++++++++++-
- 1 file changed, 32 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -248,8 +248,26 @@
-
- #address-cells = <1>;
- #size-cells = <1>;
-+ ranges;
-
-- phys = <&usb2_phy>;
-+ interrupt-parent = <&gic>;
-+
-+ ehci: ehci@21000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ehci";
-+ reg = <0x00021000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb2_phy>;
-+ };
-+
-+ ohci: ohci@22000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-ohci";
-+ reg = <0x00022000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ };
- };
-
- usb3: usb3@23000 {
-@@ -257,6 +275,19 @@
-
- #address-cells = <1>;
- #size-cells = <1>;
-+ ranges;
-+
-+ interrupt-parent = <&gic>;
-+
-+ xhci: xhci@23000 {
-+ #usb-cells = <0>;
-+
-+ compatible = "generic-xhci";
-+ reg = <0x00023000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb3_phy>;
-+ phy-names = "usb";
-+ };
- };
-
- spi@29000 {
diff --git a/target/linux/bcm53xx/patches-4.9/032-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch b/target/linux/bcm53xx/patches-4.9/032-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch
deleted file mode 100644
index 84d0009002..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0004-ARM-BCM5301X-Set-GPIO-enabling-USB-power-on-Netgear-.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 1aca202b721ce8643f87a8f85a686595c1be6b60 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:53 +0100
-Subject: [PATCH 4/6] ARM: BCM5301X: Set GPIO enabling USB power on Netgear
- R7000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is one GPIO controlling power for both USB ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -100,3 +100,11 @@
- };
- };
- };
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/032-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch b/target/linux/bcm53xx/patches-4.9/032-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch
deleted file mode 100644
index 05b7abe749..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0005-ARM-BCM5301X-Specify-all-RAM-by-including-an-extra-b.patch
+++ /dev/null
@@ -1,236 +0,0 @@
-From 94afd3b99c65072b76edd25f73bad89587b83261 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:54 +0100
-Subject: [PATCH 5/6] ARM: BCM5301X: Specify all RAM by including an extra
- block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The first 128 MiB of RAM can be accessed using an alias at address 0x0.
-
-In theory we could access whole RAM using 0x80000000 - 0xbfffffff range
-(up to 1 GiB) but it doesn't seem to work on Northstar. For some reason
-(hardware setup left by the bootloader maybe?) 0x80000000 - 0x87ffffff
-range can't be used. I reproduced this problem on:
-1) Buffalo WZR-600DHP2 (BCM47081)
-2) Netgear R6250 (BCM4708)
-3) D-Link DIR-885L (BCM47094)
-
-So it seems we're forced to access first 128 MiB using alias at 0x0 and
-the rest using real base address + 128 MiB offset which is 0x88000000.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ++-
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 3 ++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 3 ++-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 3 ++-
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 ++-
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 ++-
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 3 ++-
- 16 files changed, 32 insertions(+), 16 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- spi {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- spi {
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- gpio-keys {
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -21,7 +21,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- nand: nand@18028000 {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -18,7 +18,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
- };
-
- leds {
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -18,7 +18,8 @@
- };
-
- memory {
-- reg = <0x00000000 0x08000000>;
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
- };
-
- leds {
diff --git a/target/linux/bcm53xx/patches-4.9/032-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch b/target/linux/bcm53xx/patches-4.9/032-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch
deleted file mode 100644
index a39a31f015..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0006-ARM-BCM53573-Specify-USB-ports-of-on-SoC-controllers.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 92c6f000cb3a4280166d812d88cda3011717b548 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 7 Dec 2016 08:56:55 +0100
-Subject: [PATCH 6/6] ARM: BCM53573: Specify USB ports of on-SoC controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom OHCI and EHCI controllers always have 2 ports each on the root
-hub. Describe them in DT to allow specifying extra info or referencing
-port nodes.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -124,6 +124,17 @@
- reg = <0x4000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ };
-+
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ };
- };
-
- ohci: ohci@d000 {
-@@ -133,6 +144,17 @@
- reg = <0xd000 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port@1 {
-+ reg = <1>;
-+ };
-+
-+ ohci_port2: port@2 {
-+ reg = <2>;
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch b/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
deleted file mode 100644
index 7debd03af2..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0007-ARM-BCM5301X-Set-5-GHz-wireless-frequency-limits-on-.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From d3af86018715ebb19f4111f80e545405b208f09b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 14 Jan 2017 00:58:57 +0100
-Subject: [PATCH] ARM: BCM5301X: Set 5 GHz wireless frequency limits on Netgear
- R8000
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Netgear R8000 is a tri-band home router. It has three BCM43602 chipsets
-two of them for 5 GHz band. Both seem the same and their firmwares
-report the same set of channels. The problem is due to hardware / board
-design there are extra limitations that should be respected.
-
-First PHY should be used for U-NII-2 and U-NII-3. Third PHY should be
-used for U-NII-1. Using them in a different way may result in wireless
-not working or in noticeably reduced performance. Basic version of this
-info was provided by Broadcom employee, then it has been verified by me
-using original vendor firmware (which has limitations hardcoded in UI).
-
-This patch uses recently introduced ieee80211-freq-limit property to
-describe these limitations at DT level.
-
-Referencing PCIe devices in DT required specifying all related bridges.
-Below you can see (a bit complex) PCI tree from R8000 that explains all
-entries that I needed to put in DT.
-
-0000:00:00.0 14e4:8012 Bridge Device
-└─ 0000:01:00.0 14e4:aa52 Network Controller
-
-0001:00:00.0 14e4:8012 Bridge Device
-└─ 0001:01:00.0 10b5:8603 Bridge Device
- ├─ 0001:02:01.0 10b5:8603 Bridge Device
- │ └─ 0001:03:00.0 14e4:aa52 Network Controller
- ├─ 0001:02:02.0 10b5:8603 Bridge Device
- │ └─ 0001:04:00.0 14e4:aa52 Network Controller
- ├─ 0001:02:03.0 000d:0000 0x000000
- ├─ 0001:02:04.0 000d:0000 0x000000
- ├─ 0001:02:05.0 000d:0000 0x000000
- ├─ 0001:02:06.0 000d:0000 0x000000
- ├─ (...)
- ├─ 0001:02:1d.0 000d:0000 0x000000
- ├─ 0001:02:1e.0 000d:0000 0x000000
- └─ 0001:02:1f.0 000d:0000 0x000000
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 48 +++++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 8 +++++
- 2 files changed, 56 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -108,6 +108,54 @@
- };
- };
-
-+&pcie0 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ieee80211-freq-limit = <5735000 5835000>;
-+ };
-+ };
-+};
-+
-+&pcie1 {
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@1,2,2 {
-+ reg = <0x1000 0 0 0 0>;
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@1,4,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ieee80211-freq-limit = <5170000 5730000>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
- &usb2 {
- vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -243,6 +243,14 @@
- #gpio-cells = <2>;
- };
-
-+ pcie0: pcie@12000 {
-+ reg = <0x00012000 0x1000>;
-+ };
-+
-+ pcie1: pcie@13000 {
-+ reg = <0x00013000 0x1000>;
-+ };
-+
- usb2: usb2@21000 {
- reg = <0x00021000 0x1000>;
-
diff --git a/target/linux/bcm53xx/patches-4.9/032-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch b/target/linux/bcm53xx/patches-4.9/032-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch
deleted file mode 100644
index e25fb914f5..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0008-ARM-BCM5301X-Add-DT-for-Luxul-XAP-1410.patch
+++ /dev/null
@@ -1,89 +0,0 @@
-From eeacbb3e30f220d5d775c61421f813d4e186a325 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Sat, 14 Jan 2017 19:29:27 -0700
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XAP-1410
-
-Luxul XAP-1410 in a dual-band access point device based on BCM47081 with
-serial flash. It has 3 LEDs and just one (reset) button.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 60 +++++++++++++++++++++++++++
- 2 files changed, 61 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -83,6 +83,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
-+ bcm47081-luxul-xap-1410.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
-@@ -0,0 +1,60 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Luxul XAP-1410 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch b/target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
deleted file mode 100644
index 9e4c09b052..0000000000
--- a/target/linux/bcm53xx/patches-4.9/032-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Sat, 14 Jan 2017 19:29:28 -0700
-Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
-
-Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
-flash (for bootloader and NVRAM) and NAND flash (for firmware).
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
- 2 files changed, 108 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -84,6 +84,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-buffalo-wzr-600dhp2.dtb \
- bcm47081-buffalo-wzr-900dhp.dtb \
- bcm47081-luxul-xap-1410.dtb \
-+ bcm47081-luxul-xwr-1200.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-netgear-r7000.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -0,0 +1,107 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "Luxul XWR-1200 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ lan3 {
-+ label = "bcm53xx:green:lan3";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ lan4 {
-+ label = "bcm53xx:green:lan4";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ lan2 {
-+ label = "bcm53xx:green:lan2";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ usb {
-+ label = "bcm53xx:green:usb";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+
-+ lan1 {
-+ label = "bcm53xx:green:lan1";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "none";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/033-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch b/target/linux/bcm53xx/patches-4.9/033-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
deleted file mode 100644
index ef9500b8d3..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0001-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9200.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's tri-band wireless home router based on BCM4709A0 with 3 x BCM43602
-chipsets. LEDs will be hopefully added later to the DT.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4709-linksys-ea9200.dts | 42 ++++++++++++++++++++++++++++
- 2 files changed, 43 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -87,6 +87,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-luxul-xwr-1200.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
-+ bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Linksys EA9200";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/033-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch b/target/linux/bcm53xx/patches-4.9/033-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
deleted file mode 100644
index 66618af7d4..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0002-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA6300-V1.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6300 V1
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's wireless home router based on BCM4708A0 with BCM4360 + BCM43217
-wireless chipsets. LEDs will be hopefully added later to the DT.
-According to some sources it may use the same board as EA6400 and just
-differ by an original vendor firmware.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts | 41 +++++++++++++++++++++++++
- 2 files changed, 42 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac56u.dtb \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
-+ bcm4708-linksys-ea6300-v1.dtb \
- bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
-@@ -0,0 +1,41 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,ea6300-v1", "brcm,bcm4708";
-+ model = "Linksys EA6300 V1";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/033-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch b/target/linux/bcm53xx/patches-4.9/033-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch
deleted file mode 100644
index 655548e85a..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0003-ARM-dts-BCM5301X-Add-NAND-entries-to-bcm953012k.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3344d946ff277425052383e0a7877baf39911046 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jon.mason@broadcom.com>
-Date: Wed, 8 Feb 2017 15:45:15 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add NAND entries to bcm953012k
-
-Add the NAND entry in the DTS for the bcm953012k reference board.
-
-Signed-off-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm953012k.dts | 32 ++++++++++++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -52,6 +52,38 @@
- };
- };
-
-+&nand {
-+ nandcs@0 {
-+ compatible = "brcm,nandcs";
-+ reg = <0>;
-+ nand-on-flash-bbt;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
-+
-+ partition@0 {
-+ label = "nboot";
-+ reg = <0x00000000 0x00200000>;
-+ read-only;
-+ };
-+ partition@200000 {
-+ label = "nenv";
-+ reg = <0x00200000 0x00400000>;
-+ };
-+ partition@600000 {
-+ label = "nsystem";
-+ reg = <0x00600000 0x00a00000>;
-+ };
-+ partition@1000000 {
-+ label = "nrootfs";
-+ reg = <0x01000000 0x07000000>;
-+ };
-+ };
-+};
-+
- &uart0 {
- clock-frequency = <62499840>;
- };
diff --git a/target/linux/bcm53xx/patches-4.9/033-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch b/target/linux/bcm53xx/patches-4.9/033-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch
deleted file mode 100644
index 00a80c0fea..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0005-ARM-dts-BCM5301X-Add-basic-DT-for-Linksys-EA9500.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 3dc9eca8ece2934047f1d5c290fd36c0e8698756 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 23 Feb 2017 14:06:36 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA9500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's tri-band wireless home router based on BCM47094 AKA BCM4709C0. It
-uses 3 x BCM4366 chipsets for wireless.
-Panamera seems to be board name used by Linksys.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-linksys-panamera.dts | 36 +++++++++++++++++++++++++
- 2 files changed, 37 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
-+ bcm47094-linksys-panamera.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
-@@ -0,0 +1,36 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47094.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Linksys EA9500";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/033-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch b/target/linux/bcm53xx/patches-4.9/033-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch
deleted file mode 100644
index 3f7a537170..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0006-ARM-dts-BCM5301X-Add-support-for-BCM953012HR.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From 475dcdec8cd1bb1b73ddfd9f872822bf4ad9c242 Mon Sep 17 00:00:00 2001
-From: Steve Lin <steven.lin1@broadcom.com>
-Date: Thu, 23 Feb 2017 14:23:03 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add support for BCM953012HR
-
-Initial version of DTS to support Broadcom BCM953012HR Northstar
-HR platform, similar to, but not the same as existing 953012K.
-
-Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm953012hr.dts | 99 +++++++++++++++++++++++++++++++++++++++
- 2 files changed, 100 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm953012hr.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -99,6 +99,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm94708.dtb \
- bcm94709.dtb \
- bcm953012er.dtb \
-+ bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -0,0 +1,99 @@
-+/*
-+ * SPDX-License-Identifier: BSD-3-Clause
-+ *
-+ * Copyright(c) 2017 Broadcom
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions
-+ * are met:
-+ *
-+ * * Redistributions of source code must retain the above copyright
-+ * notice, this list of conditions and the following disclaimer.
-+ * * Redistributions in binary form must reproduce the above copyright
-+ * notice, this list of conditions and the following disclaimer in
-+ * the documentation and/or other materials provided with the
-+ * distribution.
-+ * * Neither the name of Broadcom nor the names of its contributors
-+ * may be used to endorse or promote products derived from this
-+ * software without specific prior written permission.
-+ *
-+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch4.dtsi"
-+
-+/ {
-+ model = "NorthStar HR (BCM953012HR)";
-+ compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory@80000000 {
-+ reg = <0x80000000 0x10000000>;
-+ };
-+};
-+
-+&nandcs {
-+ partition@0 {
-+ label = "nboot";
-+ reg = <0x00000000 0x00200000>;
-+ read-only;
-+ };
-+ partition@200000 {
-+ label = "nenv";
-+ reg = <0x00200000 0x00400000>;
-+ };
-+ partition@600000 {
-+ label = "nsystem";
-+ reg = <0x00600000 0x00a00000>;
-+ };
-+ partition@1000000 {
-+ label = "nrootfs";
-+ reg = <0x01000000 0x07000000>;
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+ spi-max-frequency = <62500000>;
-+ m25p,default-addr-width = <3>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "boot";
-+ reg = <0x00000000 0x000d0000>;
-+ };
-+ partition@d000 {
-+ label = "env";
-+ reg = <0x000d0000 0x00030000>;
-+ };
-+ partition@100000 {
-+ label = "system";
-+ reg = <0x00100000 0x00600000>;
-+ };
-+ partition@700000 {
-+ label = "rootfs";
-+ reg = <0x00700000 0x00900000>;
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/033-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch b/target/linux/bcm53xx/patches-4.9/033-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch
deleted file mode 100644
index 8aa28a744f..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0007-ARM-dts-BCM53573-Describe-Tenda-AC9-PCIe-card-in-DT.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From 3ba1bae984e585f500b8406b1bf3e42e0ec752b7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 14 Feb 2017 17:49:05 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Describe Tenda AC9 PCIe card in DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Tenda AC9 has PCIe controller with just one device connected to it:
-0000:00:00.0 14e4:d145 Bridge Device
-└─ 0000:01:00.0 14e4:a8db Network Controller
-
-This card is directly on SoC (doesn't use physical connector) and has
-BCM43217 chipset with bcma bus. One of its components is ChipCommon core
-which is also a GPIO controller. We need to describe it to be able to
-add devices using its GPIO pins.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 27 +++++++++++++++++++++++++++
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
- 2 files changed, 31 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -72,3 +72,30 @@
- };
- };
- };
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pcie0_chipcommon: chipcommon@0 {
-+ reg = <0 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -113,6 +113,10 @@
- };
- };
-
-+ pcie0: pcie@2000 {
-+ reg = <0x00002000 0x1000>;
-+ };
-+
- usb2: usb2@4000 {
- reg = <0x4000 0x1000>;
- ranges;
diff --git a/target/linux/bcm53xx/patches-4.9/033-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch b/target/linux/bcm53xx/patches-4.9/033-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch
deleted file mode 100644
index 9de64021d1..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0008-ARM-dts-BCM53573-Add-Tenda-AC9-2-GHz-LED.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From 86cd47e761c773f2384ac2041730d7ccfeb40095 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 14 Feb 2017 17:49:06 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's connected to a GPIO pin of an extra controller placed on the PCIe
-card.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -48,6 +48,16 @@
- };
- };
-
-+ pcie0_leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-4.9/033-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch b/target/linux/bcm53xx/patches-4.9/033-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch
deleted file mode 100644
index cbfaf32f60..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0009-ARM-dts-BCM5301X-Relicense-DTS-files-I-created-to-th.patch
+++ /dev/null
@@ -1,265 +0,0 @@
-From 153580bd3e242c204bb8b1946d76da78e826f555 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 28 Jan 2017 12:51:35 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's preferred to have DT source files licensed under BSD compatible
-license. All new BCM5301X DTS files use ISC so let's also relicense old
-ones to it.
-
-Except for me only Hauke was ever touched these files in his commit
-9faa5960eef3 ("ARM: BCM5301X: add NAND flash chip description") and
-commit bb1d8fba1965 ("ARM: BCM5301X: add NAND flash chip description for
-Asus RT-AC87U").
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47081.dtsi | 12 +++++++++++-
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 12 +++++++++++-
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 +++++++++++-
- 11 files changed, 121 insertions(+), 11 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -4,7 +4,17 @@
- *
- * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- #include "bcm5301x.dtsi"
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -4,7 +4,17 @@
- *
- * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
- *
-- * Licensed under the GNU/GPL. See COPYING for details.
-+ * Permission to use, copy, modify, and/or distribute this software for any
-+ * purpose with or without fee is hereby granted, provided that the above
-+ * copyright notice and this permission notice appear in all copies.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
-+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
-+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
-+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
-+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
-+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
-+ * PERFORMANCE OF THIS SOFTWARE.
- */
-
- /dts-v1/;
diff --git a/target/linux/bcm53xx/patches-4.9/033-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch b/target/linux/bcm53xx/patches-4.9/033-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch
deleted file mode 100644
index 05de689061..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0010-ARM-dts-BCM5301X-Add-missing-Netgear-R8000-LEDs-and-.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From 4a5782a889cfbc8523d7097c3f147572ed5129a6 Mon Sep 17 00:00:00 2001
-From: Aditya Xavier <adityaxavier@gmail.com>
-Date: Sat, 28 Jan 2017 20:07:49 +0530
-Subject: [PATCH] ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Added two WAN status LEDs and a GPIO key for brightness which were
-missing.
-
-Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
- 1 file changed, 20 insertions(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -38,18 +38,30 @@
- leds {
- compatible = "gpio-leds";
-
-- power0 {
-+ power-white {
- label = "bcm53xx:white:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
-- power1 {
-+ power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-off";
- };
-
-+ wan-white {
-+ label = "bcm53xx:white:wan";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
- 5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-@@ -115,6 +127,12 @@
- linux,code = <KEY_RESTART>;
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
- };
-+
-+ brightness {
-+ label = "Backlight";
-+ linux,code = <KEY_BRIGHTNESS_ZERO>;
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch
deleted file mode 100644
index ce74ff3e4c..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From 820a3e952b266d4355e89ed91c9b11945030321e Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 8 Mar 2017 07:41:04 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED
- trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such a trigger doesn't exist in Linux and is not needed as LED is being
-turned off by default. This could cause errors in LEDs core code when
-trying to set default trigger.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Pavel Machek <pavel@ucw.cz>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -26,19 +26,16 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- system {
-@@ -54,7 +51,6 @@
- 2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch
deleted file mode 100644
index cecae0bb7b..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch
+++ /dev/null
@@ -1,651 +0,0 @@
-From 0b660259e927177dc0c6eb3b1c39f23c6a011c5f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 8 Mar 2017 07:41:05 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED
- trigger
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Such a trigger doesn't exist in Linux and is not needed as LED is being
-turned off by default. This could cause errors in LEDs core code when
-trying to set default trigger.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 -----
- arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 --
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 -----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 ---
- arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 ---
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ----------
- arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 --
- arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ----
- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 --
- arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 --------
- arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 -------
- arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 ---------
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 --------
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 --------
- arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------
- 16 files changed, 88 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
-@@ -41,19 +41,16 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power {
-@@ -71,14 +68,12 @@
- 2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
-
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
-@@ -41,7 +41,6 @@
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power {
-@@ -59,7 +58,6 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -52,13 +52,11 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power0 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power1 {
-@@ -76,7 +74,6 @@
- router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
-@@ -88,13 +85,11 @@
- wireless0 {
- label = "bcm53xx:blue:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -43,19 +43,16 @@
- power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:blue:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-@@ -47,7 +47,6 @@
- power0 {
- label = "bcm53xx:green:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power1 {
-@@ -59,13 +58,11 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:blue:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -37,61 +37,51 @@
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3-green {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- status-red {
- label = "bcm53xx:red:status";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- status-green {
- label = "bcm53xx:green:status";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- status-blue {
- label = "bcm53xx:blue:status";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-red {
- label = "bcm53xx:red:wan";
- gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-@@ -47,7 +47,6 @@
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
-@@ -65,7 +64,6 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-@@ -68,7 +68,6 @@
- power1 {
- label = "bcm53xx:red:power";
- gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- router0 {
-@@ -80,7 +79,6 @@
- router1 {
- label = "bcm53xx:amber:router";
- gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
-@@ -92,13 +90,11 @@
- wireless0 {
- label = "bcm53xx:green:wireless";
- gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless1 {
- label = "bcm53xx:amber:wireless";
- gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
-@@ -41,7 +41,6 @@
- wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power {
-@@ -53,7 +52,6 @@
- wan {
- label = "bcm53xx:red:wan";
- gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
-@@ -31,13 +31,11 @@
- usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power-white {
-@@ -49,37 +47,31 @@
- router-amber {
- label = "bcm53xx:amber:router";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- router-white {
- label = "bcm53xx:white:router";
- gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless-amber {
- label = "bcm53xx:amber:wireless";
- gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless-white {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
-@@ -47,43 +47,36 @@
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
-@@ -47,7 +47,6 @@
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan-white {
-@@ -59,49 +58,41 @@
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wireless {
- label = "bcm53xx:white:wireless";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:white:wps";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-2 {
- label = "bcm53xx:white:5ghz-2";
- gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -26,49 +26,41 @@
- lan {
- label = "bcm53xx:blue:lan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wps {
- label = "bcm53xx:blue:wps";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:blue:2ghz";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:blue:5ghz";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-blue {
- label = "bcm53xx:blue:wan";
- gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "default-off";
- };
-
- power {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -56,37 +56,31 @@
- wan-white {
- label = "bcm53xx:white:wan";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- power-amber {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan-amber {
- label = "bcm53xx:amber:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:white:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -34,37 +34,31 @@
- lan3 {
- label = "bcm53xx:green:lan3";
- gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan4 {
- label = "bcm53xx:green:lan4";
- gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- wan {
- label = "bcm53xx:green:wan";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan1 {
- label = "bcm53xx:green:lan1";
- gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- lan2 {
- label = "bcm53xx:green:lan2";
- gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- status {
-@@ -76,13 +70,11 @@
- 2ghz {
- label = "bcm53xx:green:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz {
- label = "bcm53xx:green:5ghz";
- gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
---- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
-@@ -34,37 +34,31 @@
- power1 {
- label = "bcm53xx:amber:power";
- gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-1 {
- label = "bcm53xx:white:5ghz-1";
- gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 5ghz-2 {
- label = "bcm53xx:white:5ghz-2";
- gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- 2ghz {
- label = "bcm53xx:white:2ghz";
- gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
-
- usb3 {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "default-off";
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch b/target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch
deleted file mode 100644
index b112cba682..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From f22c635e585471d01a38b829c0753c1467b5058e Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Mon, 6 Mar 2017 11:24:44 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add TWD WD Support to DT
-
-Add support for the ARM TWD Watchdog to the bcm5301x device tree. The
-ARM TWD timer allocated the register space for the WDT, so this patch
-necessitated shrinking that. Also, the GIC masks were added for these.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 15 ++++++++++++---
- 1 file changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -70,10 +70,19 @@
- clocks = <&periph_clk>;
- };
-
-- local-timer@20600 {
-+ timer@20600 {
- compatible = "arm,cortex-a9-twd-timer";
-- reg = <0x20600 0x100>;
-- interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
-+ reg = <0x20600 0x20>;
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
-+ clocks = <&periph_clk>;
-+ };
-+
-+ watchdog@20620 {
-+ compatible = "arm,cortex-a9-twd-wdt";
-+ reg = <0x20620 0x20>;
-+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_EDGE_RISING)>;
- clocks = <&periph_clk>;
- };
-
diff --git a/target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch b/target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch
deleted file mode 100644
index d233e06817..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From bb097e3e00457bd69ad3a767f6b99424e2e06411 Mon Sep 17 00:00:00 2001
-From: Jon Mason <jonmason@broadcom.com>
-Date: Mon, 6 Mar 2017 11:24:45 -0500
-Subject: [PATCH] ARM: dts: BCM5301X: Add I2C support to the DT
-
-Add I2C support to the bcm5301x Device Tree. Since no driver changes
-are needed to enable this hardware, only the device tree changes are
-required to make this functional.
-
-Signed-off-by: Jon Mason <jonmason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -338,6 +338,16 @@
- };
- };
-
-+ i2c0: i2c@18009000 {
-+ compatible = "brcm,iproc-i2c";
-+ reg = <0x18009000 0x50>;
-+ interrupts = <GIC_SPI 121 IRQ_TYPE_NONE>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ clock-frequency = <100000>;
-+ status = "disabled";
-+ };
-+
- lcpll0: lcpll0@1800c100 {
- #clock-cells = <1>;
- compatible = "brcm,nsp-lcpll0";
diff --git a/target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch b/target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch
deleted file mode 100644
index 9584d4eb1d..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch
+++ /dev/null
@@ -1,130 +0,0 @@
-From d6661da842bbeec2082b7263c9e682792e7951a9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 14 Mar 2017 11:39:41 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless
-chipsets.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 98 ++++++++++++++++++++++
- 2 files changed, 99 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm47081-buffalo-wzr-900dhp.dtb \
- bcm47081-luxul-xap-1410.dtb \
- bcm47081-luxul-xwr-1200.dtb \
-+ bcm47081-tplink-archer-c5-v2.dtb \
- bcm4709-asus-rt-ac87u.dtb \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -0,0 +1,98 @@
-+/*
-+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm47081.dtsi"
-+
-+/ {
-+ compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
-+ model = "TP-LINK Archer C5 V2";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:green:2ghz";
-+ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ lan {
-+ label = "bcm53xx:green:lan";
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2-port1 {
-+ label = "bcm53xx:green:usb2-port1";
-+ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power {
-+ label = "bcm53xx:green:power";
-+ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wan-green {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "bcm53xx:green:wps";
-+ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan-amber {
-+ label = "bcm53xx:amber:wan";
-+ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:green:5ghz";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ usb2-port2 {
-+ label = "bcm53xx:green:usb2-port2";
-+ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rfkill {
-+ label = "WiFi";
-+ linux,code = <KEY_RFKILL>;
-+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch b/target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch
deleted file mode 100644
index 781af7a527..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From a7996761d1dacbac10c892c16faa90dfe46affcd Mon Sep 17 00:00:00 2001
-From: Steve Lin <steven.lin1@broadcom.com>
-Date: Wed, 15 Mar 2017 16:59:35 -0400
-Subject: [PATCH] ARM: dts: BCM953012HR: Add ethernet aliases
-
-Adding ethernet aliases. These are used, for example, by bootloaders,
-to modify the MAC addresses in the device tree.
-
-Signed-off-by: Steve Lin <steven.lin1@broadcom.com>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm953012hr.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/arch/arm/boot/dts/bcm953012hr.dts
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -41,6 +41,9 @@
-
- aliases {
- serial0 = &uart0;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
-+ ethernet2 = &gmac2;
- };
-
- chosen {
diff --git a/target/linux/bcm53xx/patches-4.9/033-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch b/target/linux/bcm53xx/patches-4.9/033-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch
deleted file mode 100644
index 94498e892f..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0018-ARM-dts-BCM5301X-Specify-serial-console-params-in-dt.patch
+++ /dev/null
@@ -1,161 +0,0 @@
-From 5be82d0475941dc96eeeee3c754baf48365f7bf5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 15 Mar 2017 18:03:27 +0100
-Subject: [PATCH] ARM: dts: BCM5301X: Specify serial console params in dtsi
- files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far every Northstar device we have seen was using the same serial
-console params (115200n8). It probably make the most sense to put it in
-some proper dtsi files instead of repeating over and over for every
-single device. As different boards may use different bootloaders it
-seems the safest idea is to use board specific dtsi files.
-
-Just in case some vendor decides to use different UART (parameters) this
-can be always easily overwritten.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708.dtsi | 8 ++++++++
- arch/arm/boot/dts/bcm47081.dtsi | 8 ++++++++
- arch/arm/boot/dts/bcm5301x.dtsi | 4 ----
- arch/arm/boot/dts/bcm94708.dts | 8 --------
- arch/arm/boot/dts/bcm94709.dts | 8 --------
- arch/arm/boot/dts/bcm953012er.dts | 8 --------
- arch/arm/boot/dts/bcm953012hr.dts | 5 -----
- arch/arm/boot/dts/bcm953012k.dts | 4 ----
- 8 files changed, 16 insertions(+), 37 deletions(-)
-
---- a/arch/arm/boot/dts/bcm4708.dtsi
-+++ b/arch/arm/boot/dts/bcm4708.dtsi
-@@ -12,6 +12,14 @@
- / {
- compatible = "brcm,bcm4708";
-
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm47081.dtsi
-+++ b/arch/arm/boot/dts/bcm47081.dtsi
-@@ -22,6 +22,14 @@
- / {
- compatible = "brcm,bcm47081";
-
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -18,10 +18,6 @@
- / {
- interrupt-parent = <&gic>;
-
-- chosen {
-- stdout-path = &uart0;
-- };
--
- chipcommonA {
- compatible = "simple-bus";
- ranges = <0x00000000 0x18000000 0x00001000>;
---- a/arch/arm/boot/dts/bcm94708.dts
-+++ b/arch/arm/boot/dts/bcm94708.dts
-@@ -38,14 +38,6 @@
- model = "NorthStar SVK (BCM94708)";
- compatible = "brcm,bcm94708", "brcm,bcm4708";
-
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm94709.dts
-+++ b/arch/arm/boot/dts/bcm94709.dts
-@@ -38,14 +38,6 @@
- model = "NorthStar SVK (BCM94709)";
- compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
-
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x08000000>;
- };
---- a/arch/arm/boot/dts/bcm953012er.dts
-+++ b/arch/arm/boot/dts/bcm953012er.dts
-@@ -39,14 +39,6 @@
- model = "NorthStar Enterprise Router (BCM953012ER)";
- compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
-
-- aliases {
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x00000000 0x8000000>;
- };
---- a/arch/arm/boot/dts/bcm953012hr.dts
-+++ b/arch/arm/boot/dts/bcm953012hr.dts
-@@ -40,16 +40,11 @@
- compatible = "brcm,bcm953012hr", "brcm,brcm53012", "brcm,bcm4708";
-
- aliases {
-- serial0 = &uart0;
- ethernet0 = &gmac0;
- ethernet1 = &gmac1;
- ethernet2 = &gmac2;
- };
-
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory@80000000 {
- reg = <0x80000000 0x10000000>;
- };
---- a/arch/arm/boot/dts/bcm953012k.dts
-+++ b/arch/arm/boot/dts/bcm953012k.dts
-@@ -43,10 +43,6 @@
- serial1 = &uart1;
- };
-
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
- memory {
- reg = <0x80000000 0x10000000>;
- };
diff --git a/target/linux/bcm53xx/patches-4.9/033-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch b/target/linux/bcm53xx/patches-4.9/033-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch
deleted file mode 100644
index b2a9a1f6c8..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0019-ARM-dts-BCM53573-Specify-serial-console-parameters.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 3a599e0dbc03ffc51568cf3376633d127451632d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 15 Mar 2017 18:03:28 +0100
-Subject: [PATCH] ARM: dts: BCM53573: Specify serial console parameters
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This adds baud rate, parity & number of data bits. It's required to get
-serial working correctly.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm53573.dtsi | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -13,8 +13,12 @@
- / {
- interrupt-parent = <&gic>;
-
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
- chosen {
-- stdout-path = &uart0;
-+ stdout-path = "serial0:115200n8";
- };
-
- cpus {
diff --git a/target/linux/bcm53xx/patches-4.9/033-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch b/target/linux/bcm53xx/patches-4.9/033-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch
deleted file mode 100644
index 461696e960..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0020-ARM-dts-BCM5301X-Add-CPU-thermal-sensor-and-zone.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From e55d2c7272ff647efac4aecd895b20ee66e43519 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 14 Apr 2017 23:42:28 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Add CPU thermal sensor and zone
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses CPU thermal sensor available on every Northstar chipset to
-monitor temperature. We don't have any cooling or throttling so only a
-critical trip was added.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 26 ++++++++++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -363,6 +363,12 @@
- "sata2";
- };
-
-+ thermal: thermal@1800c2c0 {
-+ compatible = "brcm,ns-thermal";
-+ reg = <0x1800c2c0 0x10>;
-+ #thermal-sensor-cells = <0>;
-+ };
-+
- srab: srab@18007000 {
- compatible = "brcm,bcm5301x-srab";
- reg = <0x18007000 0x1000>;
-@@ -390,4 +396,24 @@
-
- brcm,nand-has-wp;
- };
-+
-+ thermal-zones {
-+ cpu_thermal: cpu-thermal {
-+ polling-delay-passive = <0>;
-+ polling-delay = <1000>;
-+ coefficients = <(-556) 418000>;
-+ thermal-sensors = <&thermal>;
-+
-+ trips {
-+ cpu-crit {
-+ temperature = <125000>;
-+ hysteresis = <0>;
-+ type = "critical";
-+ };
-+ };
-+
-+ cooling-maps {
-+ };
-+ };
-+ };
- };
diff --git a/target/linux/bcm53xx/patches-4.9/033-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch b/target/linux/bcm53xx/patches-4.9/033-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch
deleted file mode 100644
index 8449a342a2..0000000000
--- a/target/linux/bcm53xx/patches-4.9/033-0021-ARM-dts-BCM5301X-Specify-MDIO-bus-in-the-DT.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From c4b88e77c28fad5151a1a4eac516b947e2d51be5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 19 Apr 2017 23:54:25 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify MDIO bus in the DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar devices have MDIO bus that may contain various PHYs attached.
-A common example is USB 3.0 PHY (that doesn't have an MDIO driver yet).
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -334,6 +334,14 @@
- };
- };
-
-+ mdio: mdio@18003000 {
-+ compatible = "brcm,iproc-mdio";
-+ reg = <0x18003000 0x8>;
-+ #size-cells = <1>;
-+ #address-cells = <0>;
-+ status = "disabled";
-+ };
-+
- i2c0: i2c@18009000 {
- compatible = "brcm,iproc-i2c";
- reg = <0x18009000 0x50>;
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch b/target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
deleted file mode 100644
index 9857dec9bd..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.14-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-each-controll.patch
+++ /dev/null
@@ -1,74 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 27 Jun 2017 19:35:27 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for each controller
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Northstar has 3 controllers: OHCI and EHCI (each with 2 ports) and XHCI
-(with just 1 port). Describe them in the DT. In future this will allow
-to reference them as trigger sources.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -272,6 +272,19 @@
- reg = <0x00021000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb2_phy>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
-
- ohci: ohci@22000 {
-@@ -280,6 +293,19 @@
- compatible = "generic-ohci";
- reg = <0x00022000 0x1000>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ohci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
- };
-
-@@ -300,6 +326,14 @@
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb3_phy>;
- phy-names = "usb";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ xhci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
- };
- };
-
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch b/target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
deleted file mode 100644
index c2195b1726..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.14-0002-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LEDs-of-f.patch
+++ /dev/null
@@ -1,139 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 2 Aug 2017 06:40:41 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few
- devices
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
-leds: document new trigger-sources property") to specify USB ports. Such an
-information can be used by operating system to setup LEDs behavior.
-
-I updated dts files for 7 devices I own and I was able to test.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 +++
- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 6 ++++++
- arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 4 ++++
- arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 5 +++++
- arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 3 +++
- arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 3 +++
- 7 files changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -52,6 +52,10 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>, <&ohci_port2>,
-+ <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- power0 {
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -48,6 +48,9 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- wireless {
---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
-@@ -42,16 +42,22 @@
- usb2 {
- label = "bcm53xx:white:usb2";
- gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- usb3-green {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- wps {
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -36,6 +36,8 @@
- usb2-port1 {
- label = "bcm53xx:green:usb2-port1";
- gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- power {
-@@ -67,6 +69,8 @@
- usb2-port2 {
- label = "bcm53xx:green:usb2-port2";
- gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
- };
-
---- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
-@@ -46,11 +46,16 @@
- usb3 {
- label = "bcm53xx:blue:usb3";
- gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- usb2 {
- label = "bcm53xx:blue:usb2";
- gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- wan-blue {
---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
-@@ -71,6 +71,9 @@
- usb3-white {
- label = "bcm53xx:white:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- 2ghz {
---- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
-@@ -59,6 +59,9 @@
- usb3 {
- label = "bcm53xx:green:usb3";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- status {
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch b/target/linux/bcm53xx/patches-4.9/035-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
deleted file mode 100644
index 1057ffcec3..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.14-0003-ARM-dts-BCM53573-Add-Broadcom-BCM947189ACDBMR-board-.patch
+++ /dev/null
@@ -1,135 +0,0 @@
-From 092ccf0415c720a1e9458a46fe75f77574027a55 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Tue, 18 Jul 2017 12:37:37 -0700
-Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board
- support
-
-Adds support for the Broadcom reference board BCM947189ACDMBR which
-features the following:
-
-* 128MB of DRAM
-* External MoCA support through a Broadcom BCM6802 chip
-* 1x external Gigabit PHY through the external BCM6802
-* 1x USB 2.0 port
-* 1x PCIE slot
-* Few configurable buttons and LEDs
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 3 +-
- arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
- 2 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -103,7 +103,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-- bcm47189-tenda-ac9.dtb
-+ bcm47189-tenda-ac9.dtb \
-+ bcm947189acdbmr.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
- bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
-@@ -0,0 +1,97 @@
-+/*
-+ * Copyright (C) 2017 Broadcom
-+ * Author: Florian Fainelli <f.fainelli@gmail.com>
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Broadcom BCM947189ACDBMR";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200 earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wps {
-+ label = "bcm53xx:blue:wps";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wps {
-+ label = "WPS";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ spi {
-+ compatible = "spi-gpio";
-+ num-chipselects = <1>;
-+ gpio-sck = <&chipcommon 21 0>;
-+ gpio-miso = <&chipcommon 22 0>;
-+ gpio-mosi = <&chipcommon 23 0>;
-+ cs-gpios = <&chipcommon 24 0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* External BCM6802 MoCA chip is connected */
-+ };
-+};
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ };
-+ };
-+};
-+
-+&usb2 {
-+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch b/target/linux/bcm53xx/patches-4.9/035-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
deleted file mode 100644
index 75f1d1772e..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.14-0004-ARM-BCM53573-Specify-ports-for-USB-LED-for-Tenda-AC9.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0173b2cd6948b5b96ac4e8dbc3bcb4dd0b45c296 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 17 Aug 2017 11:05:14 +0200
-Subject: [PATCH] ARM: BCM53573: Specify ports for USB LED for Tenda AC9
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This uses trigger-sources documented in commit 80dc6e1cd85fc ("dt-bindings:
-leds: document new trigger-sources property") to specify USB ports. Such an
-information can be used by operating system to setup LEDs behavior.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 2 ++
- arch/arm/boot/dts/bcm53573.dtsi | 4 ++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
-@@ -26,6 +26,8 @@
- usb {
- label = "bcm53xx:blue:usb";
- gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- wps {
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -138,10 +138,12 @@
-
- ehci_port1: port@1 {
- reg = <1>;
-+ #trigger-source-cells = <0>;
- };
-
- ehci_port2: port@2 {
- reg = <2>;
-+ #trigger-source-cells = <0>;
- };
- };
-
-@@ -158,10 +160,12 @@
-
- ohci_port1: port@1 {
- reg = <1>;
-+ #trigger-source-cells = <0>;
- };
-
- ohci_port2: port@2 {
- reg = <2>;
-+ #trigger-source-cells = <0>;
- };
- };
- };
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch b/target/linux/bcm53xx/patches-4.9/035-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
deleted file mode 100644
index 3148f6c32d..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.15-0001-ARM-dts-BCM5301X-Specify-USB-ports-for-USB-LED-of-Lu.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From 2460266f21f140936e627f28f28d1a4f30887ae9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 6 Oct 2017 10:52:35 +0200
-Subject: [PATCH] ARM: dts: BCM5301X: Specify USB ports for USB LED of Luxul
- XWR-1200
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This info can be used by operating system to setup LED behavior.
-
-Reported-by: Dan Haab <dhaab@luxul.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
-@@ -57,7 +57,8 @@
- usb {
- label = "bcm53xx:green:usb";
- gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-- linux,default-trigger = "none";
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- status {
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch b/target/linux/bcm53xx/patches-4.9/035-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
deleted file mode 100644
index 3d88f822c7..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.15-0002-ARM-dts-BCM5301X-Add-DT-for-Luxul-XBR-4500.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 1f4b0d5596d2e3ea8e953d578ab8444ce860d35d Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:22 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XBR-4500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47094 (AKA BCM4709C0) based router with ports-on-the-front
-board design.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 63 +++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
-+ bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
- bcm94708.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul XBR-4500 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch b/target/linux/bcm53xx/patches-4.9/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
deleted file mode 100644
index 71384a783e..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.15-0003-ARM-dts-BCM5301X-Add-DT-for-Luxul-ABR-4500.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From 65f78c4c41a9b9a7637e1dda2d5e41cf26ea971c Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:23 -0600
-Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul ABR-4500
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM47094 (AKA BCM4709C0) based router with rear-facing ports
-board design.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 63 +++++++++++++++++++++++++++
- 2 files changed, 64 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -95,6 +95,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
- bcm47094-linksys-panamera.dtb \
-+ bcm47094-luxul-abr-4500.dtb \
- bcm47094-luxul-xbr-4500.dtb \
- bcm47094-luxul-xwr-3100.dtb \
- bcm47094-netgear-r8500.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -0,0 +1,63 @@
-+/*
-+ * Copyright (C) 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4708.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
-+ model = "Luxul ABR-4500 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x18000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ status {
-+ label = "bcm53xx:green:status";
-+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+
-+ usb3 {
-+ label = "bcm53xx:green:usb3";
-+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>,
-+ <&xhci_port1>;
-+ linux,default-trigger = "usbport";
-+ };
-+
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&usb3 {
-+ vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
-+};
-+
-+&spi_nor {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch b/target/linux/bcm53xx/patches-4.9/035-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
deleted file mode 100644
index c0abc5f851..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.15-0004-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-810.patch
+++ /dev/null
@@ -1,120 +0,0 @@
-From 0aa052ce1c3340850a7e5980b6d24b3ea5779591 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:46:59 -0600
-Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-810
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
-used for 2.4 GHz.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 87 ++++++++++++++++++++++++++++
- 2 files changed, 88 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -105,6 +105,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-luxul-xap-810.dtb \
- bcm47189-tenda-ac9.dtb \
- bcm947189acdbmr.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -0,0 +1,87 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Luxul XAP-810 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ 5ghz {
-+ label = "bcm53xx:blue:5ghz";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:green:system";
-+ gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ pcie0_leds {
-+ compatible = "gpio-leds";
-+
-+ 2ghz {
-+ label = "bcm53xx:blue:2ghz";
-+ gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-off";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&pcie0 {
-+ ranges = <0x00000000 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bridge@0,0,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ wifi@0,1,0 {
-+ reg = <0x0000 0 0 0 0>;
-+ ranges = <0x00000000 0 0 0 0x00100000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ pcie0_chipcommon: chipcommon@0 {
-+ reg = <0 0x1000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/035-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch b/target/linux/bcm53xx/patches-4.9/035-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
deleted file mode 100644
index 72bd695e62..0000000000
--- a/target/linux/bcm53xx/patches-4.9/035-v4.15-0005-ARM-dts-BCM53573-Add-DT-for-Luxul-XAP-1440.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 7030ea600d560026b91726f2eb79c856b813afa9 Mon Sep 17 00:00:00 2001
-From: Dan Haab <dhaab@luxul.com>
-Date: Mon, 9 Oct 2017 09:47:00 -0600
-Subject: [PATCH] ARM: dts: BCM53573: Add DT for Luxul XAP-1440
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is BCM53573 WiSoC based outdoor access point with an extra BCM43217
-chipset used for 2.4 GHz.
-
-Signed-off-by: Dan Haab <dhaab@luxul.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 50 +++++++++++++++++++++++++++
- 2 files changed, 51 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -105,6 +105,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm953012hr.dtb \
- bcm953012k.dtb
- dtb-$(CONFIG_ARCH_BCM_53573) += \
-+ bcm47189-luxul-xap-1440.dtb \
- bcm47189-luxul-xap-810.dtb \
- bcm47189-tenda-ac9.dtb \
- bcm947189acdbmr.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -0,0 +1,50 @@
-+/*
-+ * Copyright 2017 Luxul Inc.
-+ *
-+ * Licensed under the ISC license.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm53573.dtsi"
-+
-+/ {
-+ compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
-+ model = "Luxul XAP-1440 V1";
-+
-+ chosen {
-+ bootargs = "earlycon";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ wlan {
-+ label = "bcm53xx:blue:wlan";
-+ gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-off";
-+ };
-+
-+ system {
-+ label = "bcm53xx:green:system";
-+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "timer";
-+ };
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ restart {
-+ label = "Reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/070-0001-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch b/target/linux/bcm53xx/patches-4.9/070-0001-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch
deleted file mode 100644
index ddbec25863..0000000000
--- a/target/linux/bcm53xx/patches-4.9/070-0001-phy-bcm-ns-usb3-split-all-writes-into-reg-val-pairs.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From fff3364a637796611c06f59a6f2be61685d99bfe Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sun, 2 Apr 2017 18:55:22 +0200
-Subject: [PATCH] phy: bcm-ns-usb3: split all writes into reg & val pairs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-So far all the PHY initialization was implemented using some totally
-magic values. There was some pattern there but it wasn't clear what is
-it about.
-
-Thanks to the patch submitted by Broadcom:
-[PATCH 5/6] phy: Add USB3 PHY support for Broadcom NSP SoC
-and the upstream "iproc-mdio" driver we now know there is a MDIO bus
-underneath with PHY(s) and their registers.
-
-It allows us to clean the driver a bit by making all these values less
-magical. The next step is switching to using a proper MDIO layer.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Jon Mason <jon.mason@broadcom.com>
-Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
----
- drivers/phy/phy-bcm-ns-usb3.c | 69 ++++++++++++++++++++++++++++++-------------
- 1 file changed, 49 insertions(+), 20 deletions(-)
-
---- a/drivers/phy/phy-bcm-ns-usb3.c
-+++ b/drivers/phy/phy-bcm-ns-usb3.c
-@@ -2,6 +2,7 @@
- * Broadcom Northstar USB 3.0 PHY Driver
- *
- * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
-+ * Copyright (C) 2016 Broadcom
- *
- * All magic values used for initialization (and related comments) were obtained
- * from Broadcom's SDK:
-@@ -23,6 +24,23 @@
-
- #define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
-
-+#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
-+#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000
-+#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040
-+#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060
-+
-+/* Registers of PLL30 block */
-+#define BCM_NS_USB3_PLL_CONTROL 0x01
-+#define BCM_NS_USB3_PLLA_CONTROL0 0x0a
-+#define BCM_NS_USB3_PLLA_CONTROL1 0x0b
-+
-+/* Registers of TX PMD block */
-+#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01
-+
-+/* Registers of PIPE block */
-+#define BCM_NS_USB3_LFPS_CMP 0x02
-+#define BCM_NS_USB3_LFPS_DEGLITCH 0x03
-+
- enum bcm_ns_family {
- BCM_NS_UNKNOWN,
- BCM_NS_AX,
-@@ -76,8 +94,10 @@ static inline int bcm_ns_usb3_mii_mng_wa
- usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
- }
-
--static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
-+static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
-+ u16 value)
- {
-+ u32 tmp = 0;
- int err;
-
- err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
-@@ -86,7 +106,11 @@ static int bcm_ns_usb3_mii_mng_write32(s
- return err;
- }
-
-- writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-+ /* TODO: Use a proper MDIO bus layer */
-+ tmp |= 0x58020000; /* Magic value for MDIO PHY write */
-+ tmp |= reg << 18;
-+ tmp |= value;
-+ writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
-
- return 0;
- }
-@@ -102,21 +126,22 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
- udelay(2);
-
- /* USB3 PLL Block */
-- err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
-+ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_PLL30_BLOCK);
- if (err < 0)
- return err;
-
- /* Assert Ana_Pllseq start */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000);
-
- /* Assert CML Divider ratio to 26 */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
-
- /* Asserting PLL Reset */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000);
-
- /* Deaaserting PLL Reset */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
-
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-@@ -125,22 +150,24 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
- writel(0, usb3->dmp + BCMA_RESET_CTL);
-
- /* PLL frequency monitor enable */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000);
-
- /* PIPE Block */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_PIPE_BLOCK);
-
- /* CMPMAX & CMPMINTH setting */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d);
-
- /* DEGLITCH MIN & MAX setting */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302);
-
- /* TXPMD block */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_TX_PMD_BLOCK);
-
- /* Enabling SSC */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
-
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
-@@ -159,22 +186,24 @@ static int bcm_ns_usb3_phy_init_ns_ax(st
- udelay(2);
-
- /* PLL30 block */
-- err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
-+ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_PLL30_BLOCK);
- if (err < 0)
- return err;
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
-+ bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c);
-
- /* Enable SSC */
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
-+ BCM_NS_USB3_PHY_TX_PMD_BLOCK);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
-+ bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3);
-
-- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
-+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
-
- /* Waiting MII Mgt interface idle */
- bcm_ns_usb3_mii_mng_wait_idle(usb3);
diff --git a/target/linux/bcm53xx/patches-4.9/080-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch b/target/linux/bcm53xx/patches-4.9/080-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch
deleted file mode 100644
index 39ebf7286b..0000000000
--- a/target/linux/bcm53xx/patches-4.9/080-0001-spi-bcm53xx-set-of_node-to-let-DT-specify-device-s.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 78d759daceaf0a7058f37c4142bdca9948b6d987 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 29 Dec 2016 17:27:55 +0100
-Subject: [PATCH] spi: bcm53xx: set of_node to let DT specify device(s)
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Setting of_node of master's dev seems to be a common way of letting it
-work nicely with DT. This allows specifying device there instead of
-hardcoding one in the driver code.
-
-This was successfully tested with commit 1b47b98acce2 ("ARM: BCM5301X:
-Add DT entry for SPI controller and NOR flash")
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm53xx.c | 8 +-------
- 1 file changed, 1 insertion(+), 7 deletions(-)
-
---- a/drivers/spi/spi-bcm53xx.c
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -275,10 +275,6 @@ static int bcm53xxspi_flash_read(struct
- * BCMA
- **************************************************/
-
--static struct spi_board_info bcm53xx_info = {
-- .modalias = "bcm53xxspiflash",
--};
--
- static const struct bcma_device_id bcm53xxspi_bcma_tbl[] = {
- BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_NS_QSPI, BCMA_ANY_REV, BCMA_ANY_CLASS),
- {},
-@@ -311,6 +307,7 @@ static int bcm53xxspi_bcma_probe(struct
- b53spi->bspi = true;
- bcm53xxspi_disable_bspi(b53spi);
-
-+ master->dev.of_node = dev->of_node;
- master->transfer_one = bcm53xxspi_transfer_one;
- if (b53spi->mmio_base)
- master->spi_flash_read = bcm53xxspi_flash_read;
-@@ -324,9 +321,6 @@ static int bcm53xxspi_bcma_probe(struct
- return err;
- }
-
-- /* Broadcom SoCs (at least with the CC rev 42) use SPI for flash only */
-- spi_new_device(master, &bcm53xx_info);
--
- return 0;
- }
-
diff --git a/target/linux/bcm53xx/patches-4.9/080-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch b/target/linux/bcm53xx/patches-4.9/080-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch
deleted file mode 100644
index 37fb6df2b9..0000000000
--- a/target/linux/bcm53xx/patches-4.9/080-0002-spi-bcm53xx-re-license-code-to-the-GPL-v2.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From e360e72e715f228e426edf0fc99ffa34027ab0ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 29 Dec 2016 20:13:13 +0100
-Subject: [PATCH] spi: bcm53xx: (re)license code to the GPL v2
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-My intention was to release this code under GPL v2 license. For some
-reason my initial commit 0fc6a323e191 ("spi: bcm53xx: driver for SPI
-controller on Broadcom bcma SoC") totally missed licensing info.
-MODULE_LICENSE was later added by Axel specifying "GNU Public License
-v2 or later".
-
-This patch clarifies situation by adding a proper header (with Copyright
-line) and adjusting MODULE_LICENSE. It should be acked by every driver
-contributor.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Nicholas Mc Guire <hofrat@osadl.org>
-Reviewed-by: Jingoo Han <jingoohan1@gmail.com>
-Acked-by: Jingoo Han <jingoohan1@gmail.com>
-Acked-by: Joe Perches <joe@perches.com>
-Acked-by: Axel Lin <axel.lin@ingics.com>
-Acked-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-bcm53xx.c | 10 +++++++++-
- 1 file changed, 9 insertions(+), 1 deletion(-)
-
---- a/drivers/spi/spi-bcm53xx.c
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -1,3 +1,11 @@
-+/*
-+ * Copyright (C) 2014-2016 Rafał Miłecki <rafal@milecki.pl>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
- #include <linux/kernel.h>
-@@ -355,4 +363,4 @@ module_exit(bcm53xxspi_module_exit);
-
- MODULE_DESCRIPTION("Broadcom BCM53xx SPI Controller driver");
- MODULE_AUTHOR("Rafał Miłecki <zajec5@gmail.com>");
--MODULE_LICENSE("GPL");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/bcm53xx/patches-4.9/080-0003-spi-bcm53xx-simplify-reading-SPI-data.patch b/target/linux/bcm53xx/patches-4.9/080-0003-spi-bcm53xx-simplify-reading-SPI-data.patch
deleted file mode 100644
index ee377c491f..0000000000
--- a/target/linux/bcm53xx/patches-4.9/080-0003-spi-bcm53xx-simplify-reading-SPI-data.patch
+++ /dev/null
@@ -1,107 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 29 Dec 2017 14:44:09 +0100
-Subject: [PATCH] spi: bcm53xx: simplify reading SPI data
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This commit makes transfer function use spi_transfer_is_last to
-determine if currently processed transfer is the last one. Thanks to
-that we finally set hardware registers properly and it makes controller
-behave the way it's expected to.
-
-This allows simplifying read function which can now simply start reading
-from the slot 0 instead of the last saved offset. It has been
-successfully tested using spi_write_then_read.
-
-Moreover this change fixes handling messages with two writing transfers.
-It's important for SPI flash devices as their drivers commonly use one
-transfer for a command and another one for data.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/spi/spi-bcm53xx.c | 26 ++++++++++----------------
- 1 file changed, 10 insertions(+), 16 deletions(-)
-
---- a/drivers/spi/spi-bcm53xx.c
-+++ b/drivers/spi/spi-bcm53xx.c
-@@ -27,8 +27,6 @@ struct bcm53xxspi {
- struct bcma_device *core;
- struct spi_master *master;
- void __iomem *mmio_base;
--
-- size_t read_offset;
- bool bspi; /* Boot SPI mode with memory mapping */
- };
-
-@@ -172,8 +170,6 @@ static void bcm53xxspi_buf_write(struct
-
- if (!cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
--
-- b53spi->read_offset = len;
- }
-
- static void bcm53xxspi_buf_read(struct bcm53xxspi *b53spi, u8 *r_buf,
-@@ -182,10 +178,10 @@ static void bcm53xxspi_buf_read(struct b
- u32 tmp;
- int i;
-
-- for (i = 0; i < b53spi->read_offset + len; i++) {
-+ for (i = 0; i < len; i++) {
- tmp = B53SPI_CDRAM_CONT | B53SPI_CDRAM_PCS_DISABLE_ALL |
- B53SPI_CDRAM_PCS_DSCK;
-- if (!cont && i == b53spi->read_offset + len - 1)
-+ if (!cont && i == len - 1)
- tmp &= ~B53SPI_CDRAM_CONT;
- tmp &= ~0x1;
- /* Command Register File */
-@@ -194,8 +190,7 @@ static void bcm53xxspi_buf_read(struct b
-
- /* Set queue pointers */
- bcm53xxspi_write(b53spi, B53SPI_MSPI_NEWQP, 0);
-- bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP,
-- b53spi->read_offset + len - 1);
-+ bcm53xxspi_write(b53spi, B53SPI_MSPI_ENDQP, len - 1);
-
- if (cont)
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 1);
-@@ -214,13 +209,11 @@ static void bcm53xxspi_buf_read(struct b
- bcm53xxspi_write(b53spi, B53SPI_MSPI_WRITE_LOCK, 0);
-
- for (i = 0; i < len; ++i) {
-- int offset = b53spi->read_offset + i;
-+ u16 reg = B53SPI_MSPI_RXRAM + 4 * (1 + i * 2);
-
- /* Data stored in the transmit register file LSB */
-- r_buf[i] = (u8)bcm53xxspi_read(b53spi, B53SPI_MSPI_RXRAM + 4 * (1 + offset * 2));
-+ r_buf[i] = (u8)bcm53xxspi_read(b53spi, reg);
- }
--
-- b53spi->read_offset = 0;
- }
-
- static int bcm53xxspi_transfer_one(struct spi_master *master,
-@@ -238,7 +231,8 @@ static int bcm53xxspi_transfer_one(struc
- left = t->len;
- while (left) {
- size_t to_write = min_t(size_t, 16, left);
-- bool cont = left - to_write > 0;
-+ bool cont = !spi_transfer_is_last(master, t) ||
-+ left - to_write > 0;
-
- bcm53xxspi_buf_write(b53spi, buf, to_write, cont);
- left -= to_write;
-@@ -250,9 +244,9 @@ static int bcm53xxspi_transfer_one(struc
- buf = (u8 *)t->rx_buf;
- left = t->len;
- while (left) {
-- size_t to_read = min_t(size_t, 16 - b53spi->read_offset,
-- left);
-- bool cont = left - to_read > 0;
-+ size_t to_read = min_t(size_t, 16, left);
-+ bool cont = !spi_transfer_is_last(master, t) ||
-+ left - to_read > 0;
-
- bcm53xxspi_buf_read(b53spi, buf, to_read, cont);
- left -= to_read;
diff --git a/target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch b/target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch
deleted file mode 100644
index cd691f78fd..0000000000
--- a/target/linux/bcm53xx/patches-4.9/130-ARM-dts-BCM5301X-add-missing-LEDs-for-Buffalo-WZR-90.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From c830b958f52fc666919439d6f8f6caa8b6844d44 Mon Sep 17 00:00:00 2001
-From: INAGAKI Hiroshi <musashino.open@gmail.com>
-Date: Wed, 7 Mar 2018 20:33:56 +0900
-Subject: [PATCH] ARM: dts: BCM5301X: add missing LEDs for Buffalo WZR-900DHP
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Buffalo WZR-900DHP has 8 LEDs, but there is not LED definitions in the
-dts and cannot configure these LEDs.
-I Added missing LED definitions for WZR-900DHP.
-
-Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
-Reviewed-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 68 +++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
-
---- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-@@ -35,6 +35,74 @@
- 0x88000000 0x08000000>;
- };
-
-+ spi {
-+ compatible = "spi-gpio";
-+ num-chipselects = <1>;
-+ gpio-sck = <&chipcommon 7 0>;
-+ gpio-mosi = <&chipcommon 4 0>;
-+ cs-gpios = <&chipcommon 6 0>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ hc595: gpio_spi@0 {
-+ compatible = "fairchild,74hc595";
-+ reg = <0>;
-+ registers-number = <1>;
-+ spi-max-frequency = <100000>;
-+
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ usb {
-+ label = "bcm53xx:green:usb";
-+ gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power0 {
-+ label = "bcm53xx:green:power";
-+ gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ power1 {
-+ label = "bcm53xx:red:power";
-+ gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ router0 {
-+ label = "bcm53xx:green:router";
-+ gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ router1 {
-+ label = "bcm53xx:amber:router";
-+ gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wan {
-+ label = "bcm53xx:green:wan";
-+ gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "default-on";
-+ };
-+
-+ wireless0 {
-+ label = "bcm53xx:green:wireless";
-+ gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ wireless1 {
-+ label = "bcm53xx:amber:wireless";
-+ gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
diff --git a/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
deleted file mode 100644
index f7b34941cd..0000000000
--- a/target/linux/bcm53xx/patches-4.9/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Sat, 1 Oct 2016 22:54:48 +0200
-Subject: [PATCH] usb: xhci: add support for performing fake doorbell
-
-Broadcom's Northstar XHCI controllers seem to need a special start
-procedure to work correctly. There isn't any official documentation of
-this, the problem is that controller doesn't detect any connected
-devices with default setup. Moreover connecting USB device to controller
-that doesn't run properly can cause SoC's watchdog issues.
-
-A workaround that was successfully tested on multiple devices is to
-perform a fake doorbell. This patch adds code for doing this and enables
-it on BCM4708 family.
----
- drivers/usb/host/xhci-plat.c | 6 +++++
- drivers/usb/host/xhci.c | 63 +++++++++++++++++++++++++++++++++++++++++---
- drivers/usb/host/xhci.h | 1 +
- 3 files changed, 67 insertions(+), 3 deletions(-)
-
---- a/drivers/usb/host/xhci-plat.c
-+++ b/drivers/usb/host/xhci-plat.c
-@@ -56,12 +56,18 @@ static int xhci_priv_init_quirk(struct u
-
- static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
- {
-+ struct platform_device *pdev = to_platform_device(dev);
-+ struct device_node *node = pdev->dev.of_node;
-+
- /*
- * As of now platform drivers don't provide MSI support so we ensure
- * here that the generic code does not try to make a pci_dev from our
- * dev struct in order to setup MSI
- */
- xhci->quirks |= XHCI_PLAT;
-+
-+ if (node && of_machine_is_compatible("brcm,bcm4708"))
-+ xhci->quirks |= XHCI_FAKE_DOORBELL;
- }
-
- /* called during probe() after chip reset completes */
---- a/drivers/usb/host/xhci.c
-+++ b/drivers/usb/host/xhci.c
-@@ -153,6 +153,49 @@ static int xhci_start(struct xhci_hcd *x
- return ret;
- }
-
-+/**
-+ * xhci_fake_doorbell - Perform a fake doorbell on a specified slot
-+ *
-+ * Some controllers require a fake doorbell to start correctly. Without that
-+ * they simply don't detect any devices.
-+ */
-+static int xhci_fake_doorbell(struct xhci_hcd *xhci, int slot_id)
-+{
-+ u32 temp;
-+
-+ /* Alloc a virt device for that slot */
-+ if (!xhci_alloc_virt_device(xhci, slot_id, NULL, GFP_NOIO)) {
-+ xhci_warn(xhci, "Could not allocate xHCI USB device data structures\n");
-+ return -ENOMEM;
-+ }
-+
-+ /* Ring fake doorbell for slot_id ep 0 */
-+ xhci_ring_ep_doorbell(xhci, slot_id, 0, 0);
-+ usleep_range(1000, 1500);
-+
-+ /* Read the status to check if HSE is set or not */
-+ temp = readl(&xhci->op_regs->status);
-+
-+ /* Clear HSE if set */
-+ if (temp & STS_FATAL) {
-+ xhci_dbg(xhci, "HSE problem detected, status: 0x%08x\n", temp);
-+ temp &= ~0x1fff;
-+ temp |= STS_FATAL;
-+ writel(temp, &xhci->op_regs->status);
-+ usleep_range(1000, 1500);
-+ readl(&xhci->op_regs->status);
-+ }
-+
-+ /* Free virt device */
-+ xhci_free_virt_device(xhci, slot_id);
-+
-+ /* We're done if controller is already running */
-+ if (readl(&xhci->op_regs->command) & CMD_RUN)
-+ return 0;
-+
-+ return xhci_start(xhci);
-+}
-+
- /*
- * Reset a halted HC.
- *
-@@ -568,10 +611,20 @@ int xhci_init(struct usb_hcd *hcd)
-
- static int xhci_run_finished(struct xhci_hcd *xhci)
- {
-- if (xhci_start(xhci)) {
-- xhci_halt(xhci);
-- return -ENODEV;
-+ int err;
-+
-+ err = xhci_start(xhci);
-+ if (err) {
-+ err = -ENODEV;
-+ goto err_halt;
-+ }
-+
-+ if (xhci->quirks & XHCI_FAKE_DOORBELL) {
-+ err = xhci_fake_doorbell(xhci, 1);
-+ if (err)
-+ goto err_halt;
- }
-+
- xhci->shared_hcd->state = HC_STATE_RUNNING;
- xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
-
-@@ -581,6 +634,10 @@ static int xhci_run_finished(struct xhci
- xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "Finished xhci_run for USB3 roothub");
- return 0;
-+
-+err_halt:
-+ xhci_halt(xhci);
-+ return err;
- }
-
- /*
---- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1662,6 +1662,7 @@ struct xhci_hcd {
- #define XHCI_LIMIT_ENDPOINT_INTERVAL_7 (1 << 26)
- /* Reserved. It was XHCI_U2_DISABLE_WAKE */
- #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL (1 << 28)
-+#define XHCI_FAKE_DOORBELL (1 << 29)
-
- unsigned int num_active_eps;
- unsigned int limit_active_eps;
diff --git a/target/linux/bcm53xx/patches-4.9/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch b/target/linux/bcm53xx/patches-4.9/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
deleted file mode 100644
index 1c73775b43..0000000000
--- a/target/linux/bcm53xx/patches-4.9/300-ARM-BCM5301X-Disable-MMU-and-Dcache-during-decompres.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 24 Sep 2014 22:14:07 +0200
-Subject: [PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom devices have broken CFE (bootloader) that leaves hardware in an
-invalid state. It causes problems with booting Linux. On Northstar
-devices kernel was randomly hanging in ~25% of tries during early init.
-Hangs used to happen at random places in the start_kernel. On BCM53573
-kernel doesn't even seem to start booting.
-
-To workaround this problem we need to do following very early:
-1) Clear 2 following bits in the SCTLR register:
-#define CR_M (1 << 0) /* MMU enable */
-#define CR_C (1 << 2) /* Dcache enable */
-2) Flush the whole D-cache
-3) Disable L2 cache
-
-Unfortunately this patch is not upstreamable as it does above things
-unconditionally. We can't check if we are running on Broadcom platform
-in any safe way and doing such hacks with ARCH_MULTI_V7 is unacceptable
-as it could break other devices support.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/compressed/Makefile
-+++ b/arch/arm/boot/compressed/Makefile
-@@ -31,6 +31,11 @@ ifeq ($(CONFIG_ARCH_ACORN),y)
- OBJS += ll_char_wr.o font.o
- endif
-
-+ifeq ($(CONFIG_ARCH_BCM_5301X),y)
-+OBJS += head-bcm_5301x-mpcore.o
-+OBJS += cache-v7-min.o
-+endif
-+
- ifeq ($(CONFIG_ARCH_SA1100),y)
- OBJS += head-sa1100.o
- endif
---- /dev/null
-+++ b/arch/arm/boot/compressed/head-bcm_5301x-mpcore.S
-@@ -0,0 +1,37 @@
-+/*
-+ *
-+ * Platform specific tweaks. This is merged into head.S by the linker.
-+ *
-+ */
-+
-+#include <linux/linkage.h>
-+#include <asm/assembler.h>
-+#include <asm/cp15.h>
-+
-+ .section ".start", "ax"
-+
-+/*
-+ * This code section is spliced into the head code by the linker
-+ */
-+
-+__plat_uncompress_start:
-+
-+ @ Preserve r8/r7 i.e. kernel entry values
-+ mov r12, r8
-+
-+ @ Clear MMU enable and Dcache enable bits
-+ mrc p15, 0, r0, c1, c0, 0 @ Read SCTLR
-+ bic r0, #CR_C|CR_M
-+ mcr p15, 0, r0, c1, c0, 0 @ Write SCTLR
-+ nop
-+
-+ @ Call the cache invalidation routine
-+ bl v7_flush_dcache_all
-+ nop
-+ mov r0,#0
-+ ldr r3, =0x19022000 @ L2 cache controller, control reg
-+ str r0, [r3, #0x100] @ Disable L2 cache
-+ nop
-+
-+ @ Restore
-+ mov r8, r12
---- a/arch/arm/boot/compressed/cache-v7-min.S
-+++ b/arch/arm/boot/compressed/cache-v7-min.S
-@@ -12,6 +12,7 @@
-
- #include <linux/linkage.h>
- #include <linux/init.h>
-+#include <asm/assembler.h>
-
- __INIT
-
-@@ -63,7 +64,7 @@ loop2:
- ARM( orr r11, r11, r9, lsl r2 ) @ factor index number into r11
- THUMB( lsl r6, r9, r2 )
- THUMB( orr r11, r11, r6 ) @ factor index number into r11
-- mcr p15, 0, r11, c7, c14, 2 @ clean & invalidate by set/way
-+ mcr p15, 0, r11, c7, c6, 2 @ clean & invalidate by set/way
- subs r9, r9, #1 @ decrement the index
- bge loop2
- subs r4, r4, #1 @ decrement the way
diff --git a/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
deleted file mode 100644
index a907c8921e..0000000000
--- a/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] ARM: BCM5301X: Add DT for Netgear R7900
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -91,6 +91,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4709-buffalo-wxr-1900dhp.dtb \
- bcm4709-linksys-ea9200.dtb \
- bcm4709-netgear-r7000.dtb \
-+ bcm4709-netgear-r7900.dtb \
- bcm4709-netgear-r8000.dtb \
- bcm4709-tplink-archer-c9-v1.dtb \
- bcm47094-dlink-dir-885l.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/bcm4709-netgear-r7900.dts
-@@ -0,0 +1,42 @@
-+/*
-+ * Broadcom BCM470X / BCM5301X ARM platform code.
-+ * DTS for Netgear R7900
-+ *
-+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4709.dtsi"
-+#include "bcm5301x-nand-cs0-bch8.dtsi"
-+
-+/ {
-+ compatible = "netgear,r7900", "brcm,bcm4709", "brcm,bcm4708";
-+ model = "Netgear R7900";
-+
-+ chosen {
-+ bootargs = "console=ttyS0,115200";
-+ };
-+
-+ memory {
-+ reg = <0x00000000 0x08000000
-+ 0x88000000 0x08000000>;
-+ };
-+
-+ axi@18000000 {
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
diff --git a/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
deleted file mode 100644
index 39034997fc..0000000000
--- a/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From: Felix Fietkau <nbd@nbd.name>
-Subject: [PATCH] ARM: BCM5301X: Add power button for Buffalo WZR-1750DHP
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-@@ -102,6 +102,12 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-+ power {
-+ label = "Power";
-+ linux,code = <KEY_POWER>;
-+ gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-+ };
-+
- restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
diff --git a/target/linux/bcm53xx/patches-4.9/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch b/target/linux/bcm53xx/patches-4.9/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
deleted file mode 100644
index 710d94f6bc..0000000000
--- a/target/linux/bcm53xx/patches-4.9/320-ARM-dts-BCM5301X-Add-serial-to-the-bootargs.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] ARM: dts: BCM5301X: Add serial= to the bootargs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's enough to have proper stdout-path for getting serial working but
-for some reason LEDE doesn't offer "Please press Enter to activate this
-console." unless ttyS0 is specified.
-
-This is a workaround to get serial working in LEDE.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
-@@ -13,7 +13,7 @@
- model = "TP-LINK Archer C5 V2";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
-@@ -14,7 +14,7 @@
- model = "Luxul ABR-4500 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
-@@ -14,7 +14,7 @@
- model = "Luxul XBR-4500 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XAP-1440 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
---- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
-@@ -13,7 +13,7 @@
- model = "Luxul XAP-810 V1";
-
- chosen {
-- bootargs = "earlycon";
-+ bootargs = "console=ttyS0,115200 earlycon";
- };
-
- memory {
diff --git a/target/linux/bcm53xx/patches-4.9/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch b/target/linux/bcm53xx/patches-4.9/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
deleted file mode 100644
index caed9ec41d..0000000000
--- a/target/linux/bcm53xx/patches-4.9/400-mtd-spi-nor-detect-JEDEC-incompatible-w25q128-using-.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Subject: [PATCH] mtd: spi-nor: detect JEDEC incompatible w25q128 using 0x90
- command
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some w25q128 chipsets don't support RDID (0x9f) command, they reply with
-0xff-s only. To suppose such flashes fallback to the 0x90 command.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1194,6 +1194,18 @@ static const struct flash_info *spi_nor_
- }
- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- id[0], id[1], id[2]);
-+
-+ tmp = nor->read_reg(nor, 0x90, id, SPI_NOR_MAX_ID_LEN);
-+ if (tmp < 0) {
-+ dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
-+ return ERR_PTR(tmp);
-+ }
-+ dev_info(nor->dev, "using Read Manufacturer / Device ID command (0x%02x) returned %02x %02x\n",
-+ 0x90, id[0x03], id[0x04]);
-+ if (id[0x03] == 0xef && id[0x04] == 0x17) {
-+ return spi_nor_match_id("w25q128");
-+ }
-+
- return ERR_PTR(-ENODEV);
- }
-
diff --git a/target/linux/bcm53xx/patches-4.9/410-Use-brcm-bcm947xx-cfe-partitions-binding-for-Broadco.patch b/target/linux/bcm53xx/patches-4.9/410-Use-brcm-bcm947xx-cfe-partitions-binding-for-Broadco.patch
deleted file mode 100644
index edb0ed1fdd..0000000000
--- a/target/linux/bcm53xx/patches-4.9/410-Use-brcm-bcm947xx-cfe-partitions-binding-for-Broadco.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] Use "brcm,bcm947xx-cfe-partitions" binding for Broadcom
- partitions
-
----
-
---- a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
-@@ -13,6 +13,10 @@
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
- };
- };
- };
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -346,8 +346,11 @@
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <20000000>;
-- linux,part-probe = "ofpart", "bcm47xxpart";
- status = "disabled";
-+
-+ partitions {
-+ compatible = "brcm,bcm947xx-cfe-partitions";
-+ };
- };
- };
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -314,9 +314,16 @@ static int bcm47xxpart_parse(struct mtd_
- return curr_part;
- };
-
-+static const struct of_device_id bcm47xxpart_of_match_table[] = {
-+ { .compatible = "brcm,bcm947xx-cfe-partitions" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, bcm47xxpart_of_match_table);
-+
- static struct mtd_part_parser bcm47xxpart_mtd_parser = {
- .parse_fn = bcm47xxpart_parse,
- .name = "bcm47xxpart",
-+ .of_match_table = bcm47xxpart_of_match_table,
- };
- module_mtd_part_parser(bcm47xxpart_mtd_parser);
-
diff --git a/target/linux/bcm53xx/patches-4.9/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch b/target/linux/bcm53xx/patches-4.9/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
deleted file mode 100644
index 4e44f2c1db..0000000000
--- a/target/linux/bcm53xx/patches-4.9/500-UBI-Detect-EOF-mark-and-erase-all-remaining-blocks.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 2a2af518266a29323cf30c3f9ba9ef2ceb1dd84b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Thu, 16 Oct 2014 20:52:16 +0200
-Subject: [PATCH] UBI: Detect EOF mark and erase all remaining blocks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/mtd/ubi/attach.c | 5 +++++
- drivers/mtd/ubi/io.c | 4 ++++
- drivers/mtd/ubi/ubi.h | 1 +
- 3 files changed, 10 insertions(+)
-
---- a/drivers/mtd/ubi/attach.c
-+++ b/drivers/mtd/ubi/attach.c
-@@ -95,6 +95,9 @@ static int self_check_ai(struct ubi_devi
- #define AV_ADD BIT(1)
- #define AV_FIND_OR_ADD (AV_FIND | AV_ADD)
-
-+/* Set on finding block with 0xdeadc0de, indicates erasing all blocks behind */
-+bool erase_all_next;
-+
- /**
- * find_or_add_av - internal function to find a volume, add a volume or do
- * both (find and add if missing).
-@@ -1592,6 +1595,8 @@ int ubi_attach(struct ubi_device *ubi, i
- if (!ai)
- return -ENOMEM;
-
-+ erase_all_next = false;
-+
- #ifdef CONFIG_MTD_UBI_FASTMAP
- /* On small flash devices we disable fastmap in any case. */
- if ((int)mtd_div_by_eb(ubi->mtd->size, ubi->mtd) <= UBI_FM_MAX_START) {
---- a/drivers/mtd/ubi/io.c
-+++ b/drivers/mtd/ubi/io.c
-@@ -759,6 +759,10 @@ int ubi_io_read_ec_hdr(struct ubi_device
- }
-
- magic = be32_to_cpu(ec_hdr->magic);
-+ if (magic == 0xdeadc0de)
-+ erase_all_next = true;
-+ if (erase_all_next)
-+ return read_err ? UBI_IO_FF_BITFLIPS : UBI_IO_FF;
- if (magic != UBI_EC_HDR_MAGIC) {
- if (mtd_is_eccerr(read_err))
- return UBI_IO_BAD_HDR_EBADMSG;
---- a/drivers/mtd/ubi/ubi.h
-+++ b/drivers/mtd/ubi/ubi.h
-@@ -823,6 +823,7 @@ extern struct mutex ubi_devices_mutex;
- extern struct blocking_notifier_head ubi_notifiers;
-
- /* attach.c */
-+extern bool erase_all_next;
- struct ubi_ainf_peb *ubi_alloc_aeb(struct ubi_attach_info *ai, int pnum,
- int ec);
- void ubi_free_aeb(struct ubi_attach_info *ai, struct ubi_ainf_peb *aeb);
diff --git a/target/linux/bcm53xx/patches-4.9/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.9/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
deleted file mode 100644
index 91bb4fae11..0000000000
--- a/target/linux/bcm53xx/patches-4.9/700-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From 4abdde3ad6bc0b3b157c4bf6ec0bf139d11d07e8 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 13 May 2015 14:13:28 +0200
-Subject: [PATCH] b53: add hacky CPU port fixes for devices not using port 5
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
- drivers/net/phy/b53/b53_common.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/phy/b53/b53_common.c
-+++ b/drivers/net/phy/b53/b53_common.c
-@@ -28,6 +28,7 @@
- #include <linux/of.h>
- #include <linux/of_net.h>
- #include <linux/platform_data/b53.h>
-+#include <linux/of.h>
-
- #include "b53_regs.h"
- #include "b53_priv.h"
-@@ -1579,6 +1580,28 @@ static int b53_switch_init(struct b53_de
- return ret;
- }
-
-+ /* Set correct CPU port */
-+ if (of_machine_is_compatible("asus,rt-ac87u"))
-+ sw_dev->cpu_port = 7;
-+ else if (of_machine_is_compatible("netgear,r7900"))
-+ sw_dev->cpu_port = 8;
-+ else if (of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 8;
-+ else if (of_machine_is_compatible("netgear,r8500"))
-+ sw_dev->cpu_port = 8;
-+
-+ /* Enable extra ports */
-+ if (of_machine_is_compatible("tenda,ac9"))
-+ dev->enabled_ports |= BIT(5);
-+
-+ /*
-+ * Workaround for devices using port 8 (connected to the 3rd iface).
-+ * For some reason it doesn't work (no packets on eth2).
-+ */
-+ if (of_machine_is_compatible("netgear,r7900") ||
-+ of_machine_is_compatible("netgear,r8000"))
-+ sw_dev->cpu_port = 5;
-+
- dev->enabled_ports |= BIT(sw_dev->cpu_port);
- sw_dev->ports = fls(dev->enabled_ports);
-
diff --git a/target/linux/bcm53xx/patches-4.9/900-mtd-bcm47xxpart-add-device-specific-workarounds.patch b/target/linux/bcm53xx/patches-4.9/900-mtd-bcm47xxpart-add-device-specific-workarounds.patch
deleted file mode 100644
index b4a25a39d0..0000000000
--- a/target/linux/bcm53xx/patches-4.9/900-mtd-bcm47xxpart-add-device-specific-workarounds.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Subject: [PATCH] mtd: bcm47xxpart: add device specific workarounds
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/drivers/mtd/bcm47xxpart.c
-+++ b/drivers/mtd/bcm47xxpart.c
-@@ -15,6 +15,7 @@
- #include <linux/slab.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/of.h>
-
- #include <uapi/linux/magic.h>
-
-@@ -134,6 +135,36 @@ static int bcm47xxpart_parse(struct mtd_
- break;
- }
-
-+ /*
-+ * Device specific workarounds (hacks). We should use DT to
-+ * define partitions but we need a working TRX firmware splitter
-+ * first.
-+ */
-+ if (of_machine_is_compatible("asus,rt-ac87u") && offset == 0x7ec0000) {
-+ /*
-+ * "asus" partition uses JFFS2 which we don't detect and
-+ * we don't want to as this could affect other devices.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "asus", offset, MTD_WRITEABLE);
-+ continue;
-+ } else if (of_machine_is_compatible("tplink,archer-c5-v2") && offset == 0xe40000) {
-+ /*
-+ * There is a whole set of partitions (not even listed
-+ * by original firmware): "default-mac", "pin",
-+ * "partition-table", etc.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
-+ continue;
-+ } else if (of_machine_is_compatible("tplink,archer-c9-v1") && offset == 0xe40000) {
-+ /*
-+ * There is a whole set of partitions (not even listed
-+ * by original firmware): "default-mac", "pin",
-+ * "partition-table", etc.
-+ */
-+ bcm47xxpart_add_part(&parts[curr_part++], "tplink", offset, MTD_WRITEABLE);
-+ continue;
-+ }
-+
- /* Read beginning of the block */
- err = mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
- &bytes_read, (uint8_t *)buf);
diff --git a/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch b/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
deleted file mode 100644
index 3245269c3e..0000000000
--- a/target/linux/bcm53xx/patches-4.9/905-BCM53573-minor-hacks.patch
+++ /dev/null
@@ -1,88 +0,0 @@
-From 6f1c62440eb6846cb8045d7a5480ec7bbe47c96f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Aug 2016 10:30:41 +0200
-Subject: [PATCH] BCM53573 minor hacks
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm/boot/dts/bcm53573.dtsi
-+++ b/arch/arm/boot/dts/bcm53573.dtsi
-@@ -48,6 +48,15 @@
- };
- };
-
-+ timer {
-+ compatible = "arm,armv7-timer";
-+ interrupts = <GIC_PPI 13 0>,
-+ <GIC_PPI 14 0>,
-+ <GIC_PPI 11 0>,
-+ <GIC_PPI 10 0>;
-+ clocks = <&ilp>;
-+ };
-+
- clocks {
- #address-cells = <1>;
- #size-cells = <1>;
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -348,14 +348,6 @@ static int bcma_register_devices(struct
- }
- #endif
-
--#ifdef CONFIG_BCMA_SFLASH
-- if (bus->drv_cc.sflash.present) {
-- err = platform_device_register(&bcma_sflash_dev);
-- if (err)
-- bcma_err(bus, "Error registering serial flash\n");
-- }
--#endif
--
- #ifdef CONFIG_BCMA_NFLASH
- if (bus->drv_cc.nflash.present) {
- err = platform_device_register(&bcma_nflash_dev);
-@@ -436,6 +428,14 @@ int bcma_bus_register(struct bcma_bus *b
- bcma_register_core(bus, core);
- }
-
-+#ifdef CONFIG_BCMA_SFLASH
-+ if (bus->drv_cc.sflash.present) {
-+ err = platform_device_register(&bcma_sflash_dev);
-+ if (err)
-+ bcma_err(bus, "Error registering serial flash\n");
-+ }
-+#endif
-+
- /* Try to get SPROM */
- err = bcma_sprom_get(bus);
- if (err == -ENOENT) {
---- a/drivers/clocksource/arm_arch_timer.c
-+++ b/drivers/clocksource/arm_arch_timer.c
-@@ -17,6 +17,7 @@
- #include <linux/smp.h>
- #include <linux/cpu.h>
- #include <linux/cpu_pm.h>
-+#include <linux/clk.h>
- #include <linux/clockchips.h>
- #include <linux/clocksource.h>
- #include <linux/interrupt.h>
-@@ -514,6 +515,16 @@ arch_timer_detect_rate(void __iomem *cnt
- arch_timer_rate = arch_timer_get_cntfrq();
- }
-
-+ /* Get clk rate through clk driver if present */
-+ if (!arch_timer_rate) {
-+ struct clk *clk = of_clk_get(np, 0);
-+
-+ if (!IS_ERR(clk)) {
-+ if (!clk_prepare_enable(clk))
-+ arch_timer_rate = clk_get_rate(clk);
-+ }
-+ }
-+
- /* Check the timer frequency. */
- if (arch_timer_rate == 0)
- pr_warn("Architected timer frequency not available\n");