1 files changed, 0 insertions, 63 deletions
diff --git a/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch b/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch
deleted file mode 100644
index 0210f7e2aa..0000000000
--- a/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 59f0ce1a3ebb9288fc8c1400aa503e923621161e Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <f.fainelli@gmail.com>
-Date: Mon, 23 May 2016 16:38:00 -0700
-Subject: [PATCH 1/3] ARM: dts: Enable SRAB switch and GMACs on 5301x DTS
-
-Add the Switch Register Access Block which is a special piece of
-hardware allowing us to perform indirect read/writes towards the
-integrated BCM5301X Ethernet switch.
-
-We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi
-bus node to get proper binding between the BCMA instantiated core and
-the Device Tree nodes. We will need that to be able to reference
-Ethernet Device Tree nodes in a future patch adding the switch ports
-layout.
-
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm/boot/dts/bcm5301x.dtsi | 27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm/boot/dts/bcm5301x.dtsi
-+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -239,6 +239,22 @@
- 				status = "disabled";
- 			};
- 		};
-+
-+		gmac0: ethernet@24000 {
-+			reg = <0x24000 0x800>;
-+		};
-+
-+		gmac1: ethernet@25000 {
-+			reg = <0x25000 0x800>;
-+		};
-+
-+		gmac2: ethernet@26000 {
-+			reg = <0x26000 0x800>;
-+		};
-+
-+		gmac3: ethernet@27000 {
-+			reg = <0x27000 0x800>;
-+		};
- 	};
- 
- 	lcpll0: lcpll0@1800c100 {
-@@ -260,6 +276,17 @@
- 				     "sata2";
- 	};
- 
-+	srab: srab@18007000 {
-+		compatible = "brcm,bcm5301x-srab";
-+		reg = <0x18007000 0x1000>;
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+
-+		status = "disabled";
-+
-+		/* ports are defined in board DTS */
-+	};
-+
- 	nand: nand@18028000 {
- 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
- 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;