aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/lantiq
Commit message (Collapse)AuthorAgeFilesLines
* lantiq: Slow down SPI flash on the DGN3500Daniel Gimpelevich2016-06-241-1/+1
| | | | | | | | | | | The bootloader uses 30 MHz as the SPI frequency for flash on the Germany and North America models, and 50 MHz for it on the worldwide model, but the Lantiq SPI driver in OpenWrt and LEDE may access the flash differently such that writes are capped at 20 MHz, leading to read errors reported on the worldwide model at 30 MHz. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* lantiq: make EASY80920 work with both chip versionsHauke Mehrtens2016-06-241-1/+2
| | | | | | | | | The EASY80920 is available with the A1X and the A2X chip version depending on the board version. Add both firmware versions to device tree and make the driver load the correct version depending on the chip version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: use new partition layout for EASY80920NANDHauke Mehrtens2016-06-241-6/+30
| | | | | | This matches the EASY80920NAND boards with UGW. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: build fullimage.img for EASY80920NANDHauke Mehrtens2016-06-241-0/+22
| | | | | | | | This image format is used by Lantiq's / Intel's UGW version 6.1 to 7.1. These images can be flashed onto a board with the SoC vendor boot loader as a replacement for the vendor firmware. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: remove patch adding support for building without reset controllerHauke Mehrtens2016-06-241-45/+0
| | | | | | | | The lantiq kernel arch code selects CONFIG_RESET_CONTROLLER always, so it is always selected when the lantiq target is build. we do not need support for unselected CONFIG_RESET_CONTROLLER option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix typo in new image generationBen Mulvihill2016-06-241-1/+1
| | | | Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* lantiq: fix build of NAND sysupgrade imagesMathias Kresin2016-06-241-57/+45
| | | | | | | | | | | | | The *_UBIFS_OPTS variables need to be prefixed with DEVICE_ to match the profile name. The conditions need to be evaluated after the *_UBIFS_OPTS are set, otherwise the variables are always empty. Do not append or pass the DEVICE_ prefixed profile name to the images. Use the name that is passed by the Image/Build/Profile/ step. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: clean up / fix LegacyDevice template handlingFelix Fietkau2016-06-241-15/+7
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: get rid of ifneq() checks inside command templatesFelix Fietkau2016-06-241-34/+34
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: small fix for legacy profile buildsJohn Crispin2016-06-241-36/+7
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: convert remaining legacy targets to the new image generation codeJohn Crispin2016-06-248-98/+101
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* Revert "lantiq: Use correct macaddr generating logic for the DGN3500"Zoltan HERPAI2016-06-241-5/+0
| | | | | | | | This reverts commit edb6897598b56f8390e0aef4bfe4b6530d5aca5c. /etc/board.d cannot be used for system init stuff. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: refresh patchesFelix Fietkau2016-06-246-100/+89
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: the io space was still not big enough for UHCIJohn Crispin2016-06-241-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add ARV4525PW wifi ledJohn Crispin2016-06-241-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix VG3503J loader generationJohn Crispin2016-06-241-1/+1
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix fritz7320 wifi supportJohn Crispin2016-06-244-6/+27
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix io_space_limitJohn Crispin2016-06-241-0/+28
| | | | | | this broke uhci pci support on some arv units Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix ARV452CQW button gpio setupJohn Crispin2016-06-241-7/+7
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add AVM image mageic to sysupgrade scriptJohn Crispin2016-06-241-0/+2
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add xway_legacy targetJohn Crispin2016-06-245-63/+117
| | | | | | due to bloat recent builds fail to fit into the flash of the old danube units Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: gpio-export fails to build if GPIO_SYSFS is not enabledJohn Crispin2016-06-241-7/+11
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: Add Support for Fritz!Box 7360 SLJohn Crispin2016-06-245-0/+233
| | | | | Signed-off-by: Sebastian Ortwein <krone@animeland.de> Tested-by: Guido Lipke <lipkegu@gmail.com>
* lantiq: use new property name for eiu irqsJohn Crispin2016-06-244-4/+4
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: fix a regression in the eiu irq loading codeJohn Crispin2016-06-241-0/+78
| | | | | | | | | this worked in 3.18 but broke at some point. the old code that loaded a irq table was incorrewct anyhow as it mapped the irqs int he domain which should really be done when the driver using them loads them and not the irq driver itself. Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add default lan setup to board.d scriptJohn Crispin2016-06-241-0/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: add VLAN handling fixes to xrx200 ethernet driverFelix Fietkau2016-06-241-17/+37
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fold 0400-xrx200-net-multi-phy.patch into ↵Felix Fietkau2016-06-242-39/+9
| | | | | | 0025-NET-MIPS-lantiq-adds-xrx200-net.patch Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: change xrx200 ethernet driver WRED signal to global to fix spurious ↵Felix Fietkau2016-06-241-3/+4
| | | | | | packet loss issues Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: enable swconfig LED supportFelix Fietkau2016-06-241-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: add Buffalo WBMR-300HPD supportFelix Fietkau2016-06-244-0/+325
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix image DEVICE_DTS handling, add proper default valueFelix Fietkau2016-06-242-31/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: only call Image/Prepare/Profile for defined profilesFelix Fietkau2016-06-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: un-macro the image building codeJohn Crispin2016-06-2416-382/+394
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* lantiq/image: move tplink specific image into own fileAlexander Couzens2016-06-242-44/+46
| | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* lantiq: unmacro tp-link boardsAlexander Couzens2016-06-241-14/+25
| | | | | | | even it's a little bit verbose, unmacrod board descriptions are much easier to read and to understand. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* lantiq: do not build images which exceed the flash sizeMathias Kresin2016-06-241-42/+46
| | | | | | | | | | The user benpicco in #openwrt reported that images are build which are bigger that the available flash size. He provided a proof of concept fix and gave permission to me to send it for inclusion. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: fix regression in VG3503J.dtsJohn Crispin2016-06-241-0/+2
| | | | | | | | 9d0608eef3e5b9fca - "lantiq: VG3503J - merge profiles" resulted in the dts file missing the version string. Signed-off-by: John Crispin <john@phrozen.org>
* lantiq: VG3503J - use the 11G firmwareMathias Kresin2016-06-241-2/+2
| | | | | | Use the 11G firmware for the phys as the oem firmware does. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VG3503J - merge profilesMathias Kresin2016-06-245-200/+176
| | | | | | | | The only difference between the VG3503J profiles is the version of the gphy firmware that gets loaded. This can be handled perfect fine in one device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: enable SMP for XRX200Felix Fietkau2016-06-241-0/+22
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: refresh xrx200 kernel configFelix Fietkau2016-06-241-29/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: remove dummy ltq_machine_power_off to fix gpio-poweroff driversFelix Fietkau2016-06-241-0/+23
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: Fix macaddr-setting code on DGN3500 and possibly other devicesDaniel Gimpelevich2016-06-241-4/+4
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: Use correct macaddr generating logic for the DGN3500Daniel Gimpelevich2016-06-241-0/+5
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: Use the correct SPI flash speed for the Netgear DGN3500Daniel Gimpelevich2016-06-241-1/+1
| | | | Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
* lantiq: VGV7510KW22 - enable the IP101A phyMathias Kresin2016-06-242-5/+23
| | | | | | | | | | | | The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7510KW22 - fix pinmux configurationMathias Kresin2016-06-241-25/+1
| | | | | | | | | | | The STP pinmux was initially added in assumption LAN2 led is driven by it. It worked somehow because STP group and gphy0 led0 share the GPIO. Do it the right way by adding the gphy0 led0 the gphy function. According to the author, the SPI node is a copy & paste leftover. Which makes sense since nothing is connected to the SPI bus on this device. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: VGV7519 update bombZoltan HERPAI2016-06-244-87/+77
| | | | | | | | | | | lantiq: VGV7519 - remove/merge redundant parts in dts lantiq: VGV7519 - cleanup pinmux configuration lantiq: VGV7519 - add second usb port lantiq: VGV7519 - add vlan support lantiq: VGV7519 - get mac address from board_config partition lantiq: VGV7519 - fix brn partition layout Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* lantiq: fix ARV4518PWR01 networkMohammed Berdai2016-06-241-0/+4
| | | | | | | | This patch fixes the missing Lan interface config in the file /etc/config/network for ARV4518PWR01/A which results in eth0 and br-lan being down and therefore no way to access the router unless via UART-TTL. Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>