diff options
Diffstat (limited to 'target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c')
| -rw-r--r-- | target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c b/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c deleted file mode 100644 index 19c871ae4c..0000000000 --- a/target/linux/generic/files/crypto/ocf/kirkwood/mvHal/mv_hal/pex/mvVrtBrgPex.c +++ /dev/null @@ -1,313 +0,0 @@ -/*******************************************************************************
-Copyright (C) Marvell International Ltd. and its affiliates
-
-This software file (the "File") is owned and distributed by Marvell
-International Ltd. and/or its affiliates ("Marvell") under the following
-alternative licensing terms. Once you have made an election to distribute the
-File under one of the following license alternatives, please (i) delete this
-introductory statement regarding license alternatives, (ii) delete the two
-license alternatives that you have not elected to use and (iii) preserve the
-Marvell copyright notice above.
-
-********************************************************************************
-Marvell Commercial License Option
-
-If you received this File from Marvell and you have entered into a commercial
-license agreement (a "Commercial License") with Marvell, the File is licensed
-to you under the terms of the applicable Commercial License.
-
-********************************************************************************
-Marvell GPL License Option
-
-If you received this File from Marvell, you may opt to use, redistribute and/or
-modify this File in accordance with the terms and conditions of the General
-Public License Version 2, June 1991 (the "GPL License"), a copy of which is
-available along with the File in the license.txt file or by writing to the Free
-Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
-on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
-
-THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
-WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
-DISCLAIMED. The GPL License provides additional details about this warranty
-disclaimer.
-********************************************************************************
-Marvell BSD License Option
-
-If you received this File from Marvell, you may opt to use, redistribute and/or
-modify this File under the following licensing terms.
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
- * Redistributions of source code must retain the above copyright notice,
- this list of conditions and the following disclaimer.
-
- * Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-
- * Neither the name of Marvell nor the names of its contributors may be
- used to endorse or promote products derived from this software without
- specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
-ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-*******************************************************************************/
-
-#include "mvPex.h"
-
-//#define MV_DEBUG
-/* defines */
-#ifdef MV_DEBUG
- #define DB(x) x
-#else
- #define DB(x)
-#endif
-
-/* locals */
-typedef struct
-{
- MV_U32 data;
- MV_U32 mask;
-}PEX_HEADER_DATA;
-
-/* local function forwad decleration */
-MV_U32 mvPexHwConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
- MV_U32 regOff);
-MV_STATUS mvPexHwConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
- MV_U32 func, MV_U32 regOff, MV_U32 data);
-void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev);
-
-
-PEX_HEADER_DATA configHdr[16] =
-{
-{0x888811ab, 0x00000000}, /*[device ID, vendor ID] */
-{0x00100007, 0x0000ffff}, /*[status register, command register] */
-{0x0604000e, 0x00000000}, /*[programming interface, sub class code, class code, revision ID] */
-{0x00010008, 0x00000000}, /*[BIST, header type, latency time, cache line] */
-{0x00000000, 0x00000000}, /*[base address 0] */
-{0x00000000, 0x00000000}, /*[base address 1] */
-{0x00000000, 0x00ffffff}, /*[secondary latency timersubordinate bus number, secondary bus number, primary bus number] */
-{0x0000f101, 0x00000000}, /*[secondary status ,IO limit, IO base] */
-{0x9ff0a000, 0x00000000}, /*[memory limit, memory base] */
-{0x0001fff1, 0x00000000}, /*[prefetch memory limit, prefetch memory base] */
-{0xffffffff, 0x00000000}, /*[prefetch memory base upper] */
-{0x00000000, 0x00000000}, /*[prefetch memory limit upper] */
-{0xeffff000, 0x00000000}, /*[IO limit upper 16 bits, IO base upper 16 bits] */
-{0x00000000, 0x00000000}, /*[reserved, capability pointer] */
-{0x00000000, 0x00000000}, /*[expansion ROM base address] */
-{0x00000000, 0x000000FF}, /*[bridge control, interrupt pin, interrupt line] */
-};
-
-
-#define HEADER_WRITE(data, offset) configHdr[offset/4].data = ((configHdr[offset/4].data & ~configHdr[offset/4].mask) | \
- (data & configHdr[offset/4].mask))
-#define HEADER_READ(offset) configHdr[offset/4].data
-
-/*******************************************************************************
-* mvVrtBrgPexInit - Initialize PEX interfaces
-*
-* DESCRIPTION:
-*
-* This function is responsible of intialization of the Pex Interface , It
-* configure the Pex Bars and Windows in the following manner:
-*
-* Assumptions :
-* Bar0 is always internal registers bar
-* Bar1 is always the DRAM bar
-* Bar2 is always the Device bar
-*
-* 1) Sets the Internal registers bar base by obtaining the base from
-* the CPU Interface
-* 2) Sets the DRAM bar base and size by getting the base and size from
-* the CPU Interface when the size is the sum of all enabled DRAM
-* chip selects and the base is the base of CS0 .
-* 3) Sets the Device bar base and size by getting these values from the
-* CPU Interface when the base is the base of the lowest base of the
-* Device chip selects, and the
-*
-*
-* INPUT:
-*
-* pexIf - PEX interface number.
-*
-*
-* OUTPUT:
-* None.
-*
-* RETURN:
-* MV_OK if function success otherwise MV_ERROR or MV_BAD_PARAM
-*
-*******************************************************************************/
-MV_STATUS mvPexVrtBrgInit(MV_U32 pexIf)
-{
- /* reset PEX tree to recover previous U-boot/Boot configurations */
- MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
-
-
- resetPexConfig(pexIf, localBus, 1);
- return MV_OK;
-}
-
-
-MV_U32 mvPexVrtBrgConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func,
- MV_U32 regOff)
-{
-
- MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
- MV_U32 localDev = mvPexLocalDevNumGet(pexIf);
- MV_U32 val;
- if(bus == localBus)
- {
- if(dev > 1)
- {
-/* on the local device allow only device #0 & #1 */
- return 0xffffffff;
- }
- else
- if (dev == localDev)
- {
- /* read the memory controller registers */
- return mvPexHwConfigRead (pexIf, bus, dev, func, regOff);
- }
- else
- {
- /* access the virtual brg header */
- return HEADER_READ(regOff);
- }
- }
- else
- if(bus == (localBus + 1))
- {
- /* access the device behind the virtual bridge */
- if((dev == localDev) || (dev > 1))
- {
- return 0xffffffff;
- }
- else
- {
- /* access the device behind the virtual bridge, in this case
- * change the bus number to the local bus number in order to
- * generate type 0 config cycle
- */
- mvPexLocalBusNumSet(pexIf, bus);
- mvPexLocalDevNumSet(pexIf, 1);
- val = mvPexHwConfigRead (pexIf, bus, 0, func, regOff);
- mvPexLocalBusNumSet(pexIf, localBus);
- mvPexLocalDevNumSet(pexIf, localDev);
- return val;
- }
- }
- /* for all other devices use the HW function to get the
- * requested registers
- */
- mvPexLocalDevNumSet(pexIf, 1);
- val = mvPexHwConfigRead (pexIf, bus, dev, func, regOff);
- mvPexLocalDevNumSet(pexIf, localDev);
- return val;
-}
-
-
-MV_STATUS mvPexVrtBrgConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev,
- MV_U32 func, MV_U32 regOff, MV_U32 data)
-{
- MV_U32 localBus = mvPexLocalBusNumGet(pexIf);
- MV_U32 localDev = mvPexLocalDevNumGet(pexIf);
- MV_STATUS status;
-
- if(bus == localBus)
- {
- if(dev > 1)
- {
- /* on the local device allow only device #0 & #1 */
- return MV_ERROR;
- }
- else
- if (dev == localDev)
- {
- /* read the memory controller registers */
- return mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data);
- }
- else
- {
- /* access the virtual brg header */
- HEADER_WRITE(data, regOff);
- return MV_OK;
- }
- }
- else
- if(bus == (localBus + 1))
- {
- /* access the device behind the virtual bridge */
- if((dev == localDev) || (dev > 1))
- {
- return MV_ERROR;
- }
- else
- {
- /* access the device behind the virtual bridge, in this case
- * change the bus number to the local bus number in order to
- * generate type 0 config cycle
- */
- //return mvPexHwConfigWrite (pexIf, localBus, dev, func, regOff, data);
- mvPexLocalBusNumSet(pexIf, bus);
- mvPexLocalDevNumSet(pexIf, 1);
- status = mvPexHwConfigWrite (pexIf, bus, 0, func, regOff, data);
- mvPexLocalBusNumSet(pexIf, localBus);
- mvPexLocalDevNumSet(pexIf, localDev);
- return status;
-
- }
- }
- /* for all other devices use the HW function to get the
- * requested registers
- */
- mvPexLocalDevNumSet(pexIf, 1);
- status = mvPexHwConfigWrite (pexIf, bus, dev, func, regOff, data);
- mvPexLocalDevNumSet(pexIf, localDev);
- return status;
-}
-
-
-
-
-void resetPexConfig(MV_U32 pexIf, MV_U32 bus, MV_U32 dev)
-{
- MV_U32 tData;
- MV_U32 i;
-
- /* restore the PEX configuration to initialization state */
- /* in case PEX P2P call recursive and reset config */
- tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x0);
- if(tData != 0xffffffff)
- {
- /* agent had been found - check whether P2P */
- tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x8);
- if((tData & 0xffff0000) == 0x06040000)
- {/* P2P */
- /* get the sec bus and the subordinate */
- MV_U32 secBus;
- tData = mvPexHwConfigRead (pexIf, bus, dev, 0x0, 0x18);
- secBus = ((tData >> 8) & 0xff);
- /* now scan on sec bus */
- for(i = 0;i < 0xff;i++)
- {
- resetPexConfig(pexIf, secBus, i);
- }
- /* now reset this device */
- DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev));
- mvPexHwConfigWrite(pexIf, bus, dev, 0x0, 0x18, 0x0);
- DB(mvOsPrintf("Reset bus %d dev %d\n", bus, dev));
- }
- }
-}
-
-
|