aboutsummaryrefslogtreecommitdiffstats
path: root/package/mac80211
diff options
context:
space:
mode:
Diffstat (limited to 'package/mac80211')
-rw-r--r--package/mac80211/Makefile22
-rw-r--r--package/mac80211/patches-brcm/001-disable_drivers.patch157
-rw-r--r--package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch25
-rw-r--r--package/mac80211/patches-old/001-disable_drivers.patch44
-rw-r--r--package/mac80211/patches-old/002-ssb-backport.patch (renamed from package/mac80211/patches-brcm/002-ssb-backport.patch)0
-rw-r--r--package/mac80211/patches-old/005-disable_ssb_build.patch10
-rw-r--r--package/mac80211/patches/000-kconfig.patch201
-rw-r--r--package/mac80211/patches/005-disable_ssb_build.patch14
-rw-r--r--package/mac80211/patches/200-minstrel_default.patch13
-rw-r--r--package/mac80211/patches/210-remove_unused_stuff.patch75
-rw-r--r--package/mac80211/patches/300-arm_alignment_fix.patch21
-rw-r--r--package/mac80211/patches/300-rt2x00_hw_encryption.patch248
-rw-r--r--package/mac80211/patches/310-rt2800_experimental.patch1193
-rw-r--r--package/mac80211/patches/320-enable_rt2800.patch12
14 files changed, 852 insertions, 1183 deletions
diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile
index 0650253dab..da9f300d20 100644
--- a/package/mac80211/Makefile
+++ b/package/mac80211/Makefile
@@ -13,12 +13,12 @@ PKG_NAME:=mac80211
PKG_RELEASE:=1
ifneq ($(CONFIG_LINUX_2_6_27),)
- PKG_VERSION:=2008-11-03
- PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/11
+ PKG_VERSION:=2008-11-29
+ PKG_SOURCE_URL:=http://wireless.kernel.org/download/compat-wireless-2.6/
else
PKG_VERSION:=2008-08-06
PKG_SOURCE_URL:=http://www.orbit-lab.org/kernel/compat-wireless-2.6/2008/08
- PATCH_DIR:=$(if $(CONFIG_TARGET_brcm47xx),./patches-brcm,./patches-old)
+ PATCH_DIR:=./patches-old
endif
PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
@@ -288,7 +288,7 @@ define KernelPackage/b43-common
SUBMENU:=$(WMENU)
TITLE:=Generic stuff for Broadcom wireless devices
URL:=http://linuxwireless.org/en/users/Drivers/b43
- DEPENDS:=+kmod-mac80211 +!TARGET_brcm47xx:kmod-ssb
+ DEPENDS:=+kmod-mac80211 +!TARGET_brcm47xx:kmod-ssb @LINUX_2_6_25||@LINUX_2_6_26||@LINUX_2_6_27||@LINUX_2_6_28
endef
define KernelPackage/b43
@@ -316,7 +316,9 @@ endef
BUILDFLAGS:= \
-I$(PKG_BUILD_DIR)/include \
$(foreach opt,$(CONFOPTS),-DCONFIG_$(opt)) \
- $(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS) \
+ $(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS) \
+ $(if $(CONFIG_RFKILL),-DCONFIG_B43_RFKILL -DCONFIG_B43LEGACY_RFKILL) \
+ $(if $(CONFIG_PCMCIA),-DCONFIG_B43_PCMCIA) \
$(if $(CONFIG_DEBUG_FS), -DCONFIG_MAC80211_DEBUGFS) \
-D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
@@ -330,6 +332,13 @@ MAKE_OPTS:= \
CONFIG_MAC80211_RC_MINSTREL=y \
CONFIG_MAC80211_LEDS=$(CONFIG_LEDS_TRIGGERS) \
CONFIG_MAC80211_DEBUGFS=$(CONFIG_DEBUG_FS) \
+ CONFIG_B43_PCMCIA=$(CONFIG_PCMCIA) \
+ CONFIG_B43_RFKILL=$(CONFIG_RFKILL) \
+ CONFIG_B43LEGACY_RFKILL=$(CONFIG_RFKILL) \
+ CONFIG_B43LEGACY_LEDS=$(CONFIG_LEDS_TRIGGERS) \
+ CONFIG_B43_LEDS=$(CONFIG_LEDS_TRIGGERS) \
+ $(if $(CONFIG_PACKAGE_kmod-b43),CONFIG_B43=m) \
+ $(if $(CONFIG_PACKAGE_kmod-b43legacy),CONFIG_B43LEGACY=m) \
KLIB_BUILD="$(LINUX_DIR)" \
MODPROBE=:
@@ -343,8 +352,7 @@ define Build/Prepare
unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT71FW)
-unzip -jod $(PKG_BUILD_DIR) $(DL_DIR)/$(RT2860FW)
$(TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(ZD1211FW_NAME)-$(ZD1211FW_VERSION).tar.bz2
- $(if $(CONFIG_TARGET_brcm47xx),rm -rf $(PKG_BUILD_DIR)/include/linux/ssb)
- rm $(PKG_BUILD_DIR)/include/net/ieee80211_crypt.h
+ rm -rf $(PKG_BUILD_DIR)/include/linux/ssb
rm $(PKG_BUILD_DIR)/include/net/ieee80211.h
rm $(PKG_BUILD_DIR)/include/net/ieee80211_radiotap.h
rm $(PKG_BUILD_DIR)/include/linux/eeprom_93cx6.h
diff --git a/package/mac80211/patches-brcm/001-disable_drivers.patch b/package/mac80211/patches-brcm/001-disable_drivers.patch
deleted file mode 100644
index 4407818159..0000000000
--- a/package/mac80211/patches-brcm/001-disable_drivers.patch
+++ /dev/null
@@ -1,157 +0,0 @@
-diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/config.mk
---- compat-wireless-2008-08-06/config.mk 2008-07-18 06:11:03.000000000 +0200
-+++ compat-wireless-2008-08-06.new/config.mk 2008-11-15 00:26:38.000000000 +0100
-@@ -72,70 +72,34 @@
- CONFIG_ATH5K=m
- CONFIG_ATH5K_DEBUG=n
-
--# Required for older kernels which still use this flag.
--CONFIG_IWLWIFI=m
--
--CONFIG_IWLCORE=m
--CONFIG_IWL3945=m
--CONFIG_IWL4965=m
--CONFIG_IWL4965_HT=y
- CONFIG_B43=m
-+CONFIG_B43_NPHY=y
- # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
- # Example, bcm4318:
- # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
--CONFIG_B43_PCMCIA=y
-+# CONFIG_B43_PCMCIA=y
- CONFIG_B43_DMA=y
--CONFIG_B43_PIO=y
-+# CONFIG_B43_PIO=y
- # B43_PIO selects SSB_BLOCKIO
--CONFIG_SSB_BLOCKIO=y
--CONFIG_B43_DMA_AND_PIO_MODE=y
--CONFIG_B43_PCI_AUTOSELECT=y
--CONFIG_B43_PCICORE_AUTOSELECT=y
--#CONFIG_B43_RFKILL=n
-+# CONFIG_SSB_BLOCKIO=y
-+# CONFIG_B43_DMA_AND_PIO_MODE=y
-+# CONFIG_B43_PCI_AUTOSELECT=y
-+# CONFIG_B43_PCICORE_AUTOSELECT=y
-+CONFIG_B43_RFKILL=y
- CONFIG_B43_LEDS=y
- # CONFIG_B43_DEBUG is not set
-
- CONFIG_B43LEGACY=m
--CONFIG_B43LEGACY_PCI_AUTOSELECT=y
--CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
-+CONFIG_B43LEGACY_RFKILL=y
-+CONFIG_B43LEGACY_LEDS=y
-+# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-+# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
- CONFIG_B43LEGACY_DMA=y
--CONFIG_B43LEGACY_PIO=y
--CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
--
--# The Intel ipws
--CONFIG_IPW2100=m
--CONFIG_IPW2100_MONITOR=y
--CONFIG_IPW2200=m
--CONFIG_IPW2200_MONITOR=y
--CONFIG_IPW2200_RADIOTAP=y
--CONFIG_IPW2200_PROMISCUOUS=y
--# The above enables use a second interface prefixed 'rtap'.
--# Example usage:
--#
--# % modprobe ipw2200 rtap_iface=1
--# % ifconfig rtap0 up
--# % tethereal -i rtap0
--#
--# If you do not specify 'rtap_iface=1' as a module parameter then
--# the rtap interface will not be created and you will need to turn
--# it on via sysfs:
--#
--# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
--CONFIG_IPW2200_QOS=y
--
--NEED_IEEE80211=y
-+# CONFIG_B43LEGACY_PIO=y
-+# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-
- CONFIG_P54_PCI=m
-
--CONFIG_SSB_PCIHOST_POSSIBLE=y
--CONFIG_SSB_PCIHOST=y
--CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
--CONFIG_SSB_DRIVER_PCICORE=y
--CONFIG_SSB_B43_PCI_BRIDGE=y
--
--CONFIG_RTL8180=m
--CONFIG_ADM8211=m
--
- CONFIG_RT2X00_LIB_PCI=m
- CONFIG_RT2400PCI=m
- CONFIG_RT2500PCI=m
-@@ -159,31 +123,7 @@
- ifneq ($(CONFIG_USB),)
- CONFIG_ZD1211RW=m
-
--# support for USB Wireless devices using Atmel at76c503,
--# at76c505 or at76c505a chips.
--CONFIG_USB_ATMEL=m
--
--# Stuff here things which depend on kernel versions for USB
--ifeq ($(shell test -e $(KLIB_BUILD)/Makefile && echo yes),yes)
--KERNEL_SUBLEVEL = $(shell $(MAKE) -C $(KLIB_BUILD) kernelversion | sed -n 's/^2\.6\.\([0-9]\+\).*/\1/p')
--ifeq ($(shell test $(KERNEL_SUBLEVEL) -gt 21 && echo yes),yes)
--
--# Sorry, rndis_wlan uses cancel_work_sync which is new and can't be done in compat...
--
--# Wireless RNDIS USB support (RTL8185 802.11g) A-Link WL54PC
--# All of these devices are based on Broadcom 4320 chip which
--# is only wireless RNDIS chip known to date.
--# Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
--# it also requires new RNDIS_HOST and CDC_ETHER modules which we add
--CONFIG_USB_NET_RNDIS_HOST=m
--CONFIG_USB_NET_RNDIS_WLAN=m
--CONFIG_USB_NET_CDCETHER=m
--
--endif
--endif
--
- CONFIG_P54_USB=m
--CONFIG_RTL8187=m
-
- # RT2500USB does not require firmware
- CONFIG_RT2500USB=m
-@@ -212,36 +152,6 @@
- # p54
- CONFIG_P54_COMMON=m
-
--# Sonics Silicon Backplane
--CONFIG_SSB_POSSIBLE=y
--CONFIG_SSB=m
--CONFIG_SSB_SPROM=y
--
--ifneq ($(CONFIG_PCMCIA),)
--CONFIG_SSB_PCMCIAHOST=y
--endif
--
--# These two are for mips
--CONFIG_SSB_DRIVER_MIPS=n
--CONFIG_SSB_PCICORE_HOSTMODE=n
--# CONFIG_SSB_DEBUG is not set
--# CONFIG_SSB_DRIVER_EXTIF=y
--
--ifneq ($(CONFIG_USB),)
--CONFIG_LIBERTAS_USB=m
--NEED_LIBERTAS=y
--endif
--ifneq ($(CONFIG_PCMCIA),)
--CONFIG_LIBERTAS_CS=m
--NEED_LIBERTAS=y
--endif
--ifeq ($(NEED_LIBERTAS),y)
--CONFIG_LIBERTAS=m
--# Libertas uses the old stack but not fully, it will soon
--# be cleaned.
--NEED_IEEE80211=y
--endif
--
- ifeq ($(NEED_IEEE80211),y)
- # Old ieee80211 "stack"
- # Note: old softmac is scheduled for removal so we
diff --git a/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch b/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch
deleted file mode 100644
index a8080b20ea..0000000000
--- a/package/mac80211/patches-brcm/004-allow-ap-vlan-modes.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-Subject: mac80211: allow AP and VLAN modes
-
-This patch allows switching interfaces into AP/VLAN modes using
-cfg80211 (nl80211). Don't allow doing it with wext because then
-people will just attempt to do it manually (without hostapd) and
-complain that it doesn't work.
-
-Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
----
- net/mac80211/cfg.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- everything.orig/net/mac80211/cfg.c 2008-08-06 21:38:13.000000000 +0200
-+++ everything/net/mac80211/cfg.c 2008-08-06 21:38:24.000000000 +0200
-@@ -33,6 +33,10 @@ nl80211_type_to_mac80211_type(enum nl802
- case NL80211_IFTYPE_MESH_POINT:
- return IEEE80211_IF_TYPE_MESH_POINT;
- #endif
-+ case NL80211_IFTYPE_AP:
-+ return IEEE80211_IF_TYPE_AP;
-+ case NL80211_IFTYPE_AP_VLAN:
-+ return IEEE80211_IF_TYPE_VLAN;
- case NL80211_IFTYPE_WDS:
- return IEEE80211_IF_TYPE_WDS;
- default:
diff --git a/package/mac80211/patches-old/001-disable_drivers.patch b/package/mac80211/patches-old/001-disable_drivers.patch
index 49bc193f59..72c72cd2fa 100644
--- a/package/mac80211/patches-old/001-disable_drivers.patch
+++ b/package/mac80211/patches-old/001-disable_drivers.patch
@@ -1,7 +1,6 @@
-diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/config.mk
--- compat-wireless-2008-08-06/config.mk 2008-07-18 06:11:03.000000000 +0200
-+++ compat-wireless-2008-08-06.new/config.mk 2008-11-15 00:21:17.000000000 +0100
-@@ -72,70 +72,8 @@
++++ compat-wireless-2008-08-06.new/config.mk 2008-11-28 21:10:31.000000000 +0100
+@@ -72,70 +72,34 @@
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=n
@@ -13,25 +12,40 @@ diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/co
-CONFIG_IWL4965=m
-CONFIG_IWL4965_HT=y
-CONFIG_B43=m
--# B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
--# Example, bcm4318:
--# http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
++# CONFIG_B43=m
++CONFIG_B43_NPHY=y
+ # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
+ # Example, bcm4318:
+ # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
-CONFIG_B43_PCMCIA=y
--CONFIG_B43_DMA=y
++# CONFIG_B43_PCMCIA=y
+ CONFIG_B43_DMA=y
-CONFIG_B43_PIO=y
--# B43_PIO selects SSB_BLOCKIO
++# CONFIG_B43_PIO=y
+ # B43_PIO selects SSB_BLOCKIO
-CONFIG_SSB_BLOCKIO=y
-CONFIG_B43_DMA_AND_PIO_MODE=y
-CONFIG_B43_PCI_AUTOSELECT=y
-CONFIG_B43_PCICORE_AUTOSELECT=y
-#CONFIG_B43_RFKILL=n
-CONFIG_B43_LEDS=y
--# CONFIG_B43_DEBUG is not set
--
++# CONFIG_SSB_BLOCKIO=y
++# CONFIG_B43_DMA_AND_PIO_MODE=y
++# CONFIG_B43_PCI_AUTOSELECT=y
++# CONFIG_B43_PCICORE_AUTOSELECT=y
++# CONFIG_B43_RFKILL=y
++# CONFIG_B43_LEDS=y
+ # CONFIG_B43_DEBUG is not set
+
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_PCI_AUTOSELECT=y
-CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
--CONFIG_B43LEGACY_DMA=y
++# CONFIG_B43LEGACY=m
++# CONFIG_B43LEGACY_RFKILL=y
++# CONFIG_B43LEGACY_LEDS=y
++# CONFIG_B43LEGACY_PCI_AUTOSELECT=y
++# CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
+ CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-
@@ -57,7 +71,9 @@ diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/co
-CONFIG_IPW2200_QOS=y
-
-NEED_IEEE80211=y
--
++# CONFIG_B43LEGACY_PIO=y
++# CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+
CONFIG_P54_PCI=m
-CONFIG_SSB_PCIHOST_POSSIBLE=y
@@ -72,7 +88,7 @@ diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/co
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
-@@ -159,31 +97,7 @@
+@@ -159,31 +123,7 @@
ifneq ($(CONFIG_USB),)
CONFIG_ZD1211RW=m
@@ -104,7 +120,7 @@ diff -urN compat-wireless-2008-08-06/config.mk compat-wireless-2008-08-06.new/co
# RT2500USB does not require firmware
CONFIG_RT2500USB=m
-@@ -212,36 +126,6 @@
+@@ -212,36 +152,6 @@
# p54
CONFIG_P54_COMMON=m
diff --git a/package/mac80211/patches-brcm/002-ssb-backport.patch b/package/mac80211/patches-old/002-ssb-backport.patch
index a57143ae1d..a57143ae1d 100644
--- a/package/mac80211/patches-brcm/002-ssb-backport.patch
+++ b/package/mac80211/patches-old/002-ssb-backport.patch
diff --git a/package/mac80211/patches-old/005-disable_ssb_build.patch b/package/mac80211/patches-old/005-disable_ssb_build.patch
new file mode 100644
index 0000000000..8a9a06b9d5
--- /dev/null
+++ b/package/mac80211/patches-old/005-disable_ssb_build.patch
@@ -0,0 +1,10 @@
+--- a/Makefile 2008-07-18 06:11:03.000000000 +0200
++++ b/Makefile 2008-11-28 19:31:58.000000000 +0100
+@@ -19,7 +19,6 @@
+ obj-y := net/wireless/ net/mac80211/
+ ifeq ($(ONLY_CORE),)
+ obj-y += net/ieee80211/ \
+- drivers/ssb/ \
+ drivers/misc/ \
+ drivers/net/usb/ \
+ drivers/net/wireless/
diff --git a/package/mac80211/patches/000-kconfig.patch b/package/mac80211/patches/000-kconfig.patch
deleted file mode 100644
index bcbf8868b5..0000000000
--- a/package/mac80211/patches/000-kconfig.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- /dev/null
-+++ b/net/mac80211/Kconfig
-@@ -0,0 +1,198 @@
-+config MAC80211
-+ tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
-+ select CRYPTO
-+ select CRYPTO_ECB
-+ select CRYPTO_ARC4
-+ select CRYPTO_AES
-+ select CRC32
-+ select WIRELESS_EXT
-+ select CFG80211
-+ ---help---
-+ This option enables the hardware independent IEEE 802.11
-+ networking stack.
-+
-+menu "Rate control algorithm selection"
-+ depends on MAC80211 != n
-+
-+config MAC80211_RC_PID
-+ bool "PID controller based rate control algorithm" if EMBEDDED
-+ default y
-+ ---help---
-+ This option enables a TX rate control algorithm for
-+ mac80211 that uses a PID controller to select the TX
-+ rate.
-+
-+choice
-+ prompt "Default rate control algorithm"
-+ default MAC80211_RC_DEFAULT_PID
-+ ---help---
-+ This option selects the default rate control algorithm
-+ mac80211 will use. Note that this default can still be
-+ overriden through the ieee80211_default_rc_algo module
-+ parameter if different algorithms are available.
-+
-+config MAC80211_RC_DEFAULT_PID
-+ bool "PID controller based rate control algorithm"
-+ depends on MAC80211_RC_PID
-+ ---help---
-+ Select the PID controller based rate control as the
-+ default rate control algorithm. You should choose
-+ this unless you know what you are doing.
-+
-+endchoice
-+
-+config MAC80211_RC_DEFAULT
-+ string
-+ default "pid" if MAC80211_RC_DEFAULT_PID
-+ default ""
-+
-+endmenu
-+
-+config MAC80211_MESH
-+ bool "Enable mac80211 mesh networking (pre-802.11s) support"
-+ depends on MAC80211 && EXPERIMENTAL
-+ ---help---
-+ This options enables support of Draft 802.11s mesh networking.
-+ The implementation is based on Draft 1.08 of the Mesh Networking
-+ amendment. For more information visit http://o11s.org/.
-+
-+
-+config MAC80211_LEDS
-+ bool "Enable LED triggers"
-+ depends on MAC80211
-+ select NEW_LEDS
-+ select LEDS_TRIGGERS
-+ ---help---
-+ This option enables a few LED triggers for different
-+ packet receive/transmit events.
-+
-+config MAC80211_DEBUGFS
-+ bool "Export mac80211 internals in DebugFS"
-+ depends on MAC80211 && DEBUG_FS
-+ ---help---
-+ Select this to see extensive information about
-+ the internal state of mac80211 in debugfs.
-+
-+ Say N unless you know you need this.
-+
-+menuconfig MAC80211_DEBUG_MENU
-+ bool "Select mac80211 debugging features"
-+ depends on MAC80211
-+ ---help---
-+ This option collects various mac80211 debug settings.
-+
-+config MAC80211_DEBUG_PACKET_ALIGNMENT
-+ bool "Enable packet alignment debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ This option is recommended for driver authors and strongly
-+ discouraged for everybody else, it will trigger a warning
-+ when a driver hands mac80211 a buffer that is aligned in
-+ a way that will cause problems with the IP stack on some
-+ architectures.
-+
-+ Say N unless you're writing a mac80211 based driver.
-+
-+config MAC80211_NOINLINE
-+ bool "Do not inline TX/RX handlers"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ This option affects code generation in mac80211, when
-+ selected some functions are marked "noinline" to allow
-+ easier debugging of problems in the transmit and receive
-+ paths.
-+
-+ This option increases code size a bit and inserts a lot
-+ of function calls in the code, but is otherwise safe to
-+ enable.
-+
-+ If unsure, say N unless you expect to be finding problems
-+ in mac80211.
-+
-+config MAC80211_VERBOSE_DEBUG
-+ bool "Verbose debugging output"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out
-+ many debugging messages. It should not be selected
-+ on production systems as some of the messages are
-+ remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_HT_DEBUG
-+ bool "Verbose HT debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ This option enables 802.11n High Throughput features
-+ debug tracing output.
-+
-+ It should not be selected on production systems as some
-+ of the messages are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_TKIP_DEBUG
-+ bool "Verbose TKIP debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out
-+ very verbose TKIP debugging messages. It should not
-+ be selected on production systems as those messages
-+ are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_IBSS_DEBUG
-+ bool "Verbose IBSS debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out
-+ very verbose IBSS debugging messages. It should not
-+ be selected on production systems as those messages
-+ are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_VERBOSE_PS_DEBUG
-+ bool "Verbose powersave mode debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out very
-+ verbose power save mode debugging messages (when mac80211
-+ is an AP and has power saving stations.)
-+ It should not be selected on production systems as those
-+ messages are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_VERBOSE_MPL_DEBUG
-+ bool "Verbose mesh peer link debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ depends on MAC80211_MESH
-+ ---help---
-+ Selecting this option causes mac80211 to print out very
-+ verbose mesh peer link debugging messages (when mac80211
-+ is taking part in a mesh network).
-+ It should not be selected on production systems as those
-+ messages are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_DEBUG_COUNTERS
-+ bool "Extra statistics for TX/RX debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ depends on MAC80211_DEBUGFS
-+ ---help---
-+ Selecting this option causes mac80211 to keep additional
-+ and very verbose statistics about TX and RX handler use
-+ and show them in debugfs.
-+
-+ If unsure, say N.
-+
-+config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
-+ bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
-+ debug messages.
diff --git a/package/mac80211/patches/005-disable_ssb_build.patch b/package/mac80211/patches/005-disable_ssb_build.patch
new file mode 100644
index 0000000000..7a4c513575
--- /dev/null
+++ b/package/mac80211/patches/005-disable_ssb_build.patch
@@ -0,0 +1,14 @@
+diff --git a/Makefile b/Makefile
+index 6a5eff4..225c711 100644
+--- a/Makefile
++++ b/Makefile
+@@ -20,8 +20,7 @@ NOSTDINC_FLAGS := -I$(M)/include/ -include $(M)/include/net/compat.h $(CFLAGS)
+ obj-y := net/wireless/ net/mac80211/
+ ifeq ($(ONLY_CORE),)
+ obj-$(CONFIG_B44) += drivers/net/b44.o
+-obj-y += drivers/ssb/ \
+- drivers/misc/ \
++obj-y += drivers/misc/ \
+ drivers/net/usb/ \
+ drivers/net/wireless/
+ endif
diff --git a/package/mac80211/patches/200-minstrel_default.patch b/package/mac80211/patches/200-minstrel_default.patch
deleted file mode 100644
index 6d6e728396..0000000000
--- a/package/mac80211/patches/200-minstrel_default.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/config.mk
-+++ b/config.mk
-@@ -47,8 +47,9 @@ endif
- endif # build check
- endif # kernel Makefile check
-
--CONFIG_MAC80211_RC_DEFAULT=pid
-+CONFIG_MAC80211_RC_DEFAULT=minstrel
- CONFIG_MAC80211_RC_PID=y
-+CONFIG_MAC80211_RC_MINSTREL=y
-
- # enable mesh networking too
- CONFIG_MAC80211_MESH=y
diff --git a/package/mac80211/patches/210-remove_unused_stuff.patch b/package/mac80211/patches/210-remove_unused_stuff.patch
index 11a0dc5613..fb167f581e 100644
--- a/package/mac80211/patches/210-remove_unused_stuff.patch
+++ b/package/mac80211/patches/210-remove_unused_stuff.patch
@@ -1,44 +1,85 @@
+diff --git a/config.mk b/config.mk
+index d94a976..39fcaea 100644
--- a/config.mk
+++ b/config.mk
-@@ -108,12 +108,12 @@ CONFIG_B43LEGACY_PIO=y
+@@ -69,10 +69,10 @@ CONFIG_MAC80211_LEDS=y
+ CONFIG_MAC80211_MESH=y
+
+ CONFIG_CFG80211=m
+-CONFIG_LIB80211=m
+-CONFIG_LIB80211_CRYPT_WEP=m
+-CONFIG_LIB80211_CRYPT_CCMP=m
+-CONFIG_LIB80211_CRYPT_TKIP=m
++#CONFIG_LIB80211=m
++#CONFIG_LIB80211_CRYPT_WEP=m
++#CONFIG_LIB80211_CRYPT_CCMP=m
++#CONFIG_LIB80211_CRYPT_TKIP=m
+
+ CONFIG_NL80211=y
+ # We'll disable this as soon major distributions
+@@ -101,14 +101,14 @@ CONFIG_B43=m
+ # B43 uses PCMCIA only for Compact Flash. The Cardbus cards uses PCI
+ # Example, bcm4318:
+ # http://www.multicap.biz/wireless-lan/indoor-wlan-hardware/sdc-cf10g-80211g-compact-flash-module
+-CONFIG_B43_PCMCIA=y
++#CONFIG_B43_PCMCIA=y
+ CONFIG_B43_PIO=y
+ # B43_PIO selects SSB_BLOCKIO
+ CONFIG_SSB_BLOCKIO=y
+ CONFIG_B43_PCI_AUTOSELECT=y
+ CONFIG_B43_PCICORE_AUTOSELECT=y
+ #CONFIG_B43_RFKILL=n
+-CONFIG_B43_LEDS=y
++#CONFIG_B43_LEDS=y
+ # CONFIG_B43_DEBUG is not set
+
+ CONFIG_B43LEGACY=m
+@@ -119,13 +119,13 @@ CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# The Intel ipws
+-CONFIG_LIBIPW=m
-CONFIG_IPW2100=m
-CONFIG_IPW2100_MONITOR=y
-CONFIG_IPW2200=m
-CONFIG_IPW2200_MONITOR=y
-CONFIG_IPW2200_RADIOTAP=y
-CONFIG_IPW2200_PROMISCUOUS=y
-+# CONFIG_IPW2100=m
-+# CONFIG_IPW2100_MONITOR=y
-+# CONFIG_IPW2200=m
-+# CONFIG_IPW2200_MONITOR=y
-+# CONFIG_IPW2200_RADIOTAP=y
-+# CONFIG_IPW2200_PROMISCUOUS=y
++#CONFIG_LIBIPW=m
++#CONFIG_IPW2100=m
++#CONFIG_IPW2100_MONITOR=y
++#CONFIG_IPW2200=m
++#CONFIG_IPW2200_MONITOR=y
++#CONFIG_IPW2200_RADIOTAP=y
++#CONFIG_IPW2200_PROMISCUOUS=y
# The above enables use a second interface prefixed 'rtap'.
# Example usage:
#
-@@ -126,9 +126,9 @@ CONFIG_IPW2200_PROMISCUOUS=y
+@@ -138,7 +138,7 @@ CONFIG_IPW2200_PROMISCUOUS=y
# it on via sysfs:
#
# % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
-CONFIG_IPW2200_QOS=y
-+# CONFIG_IPW2200_QOS=y
-
--NEED_IEEE80211=y
-+# NEED_IEEE80211=y
++#CONFIG_IPW2200_QOS=y
CONFIG_P54_PCI=m
-@@ -227,8 +227,8 @@ CONFIG_SSB_PCICORE_HOSTMODE=n
- # CONFIG_SSB_DRIVER_EXTIF=y
-
+@@ -239,15 +239,15 @@ CONFIG_SSB_PCICORE_HOSTMODE=n
ifneq ($(CONFIG_USB),)
--CONFIG_LIBERTAS_USB=m
+ ifneq ($(CONFIG_LIBERTAS_THINFIRM_USB),m)
+ CONFIG_LIBERTAS_USB=m
-NEED_LIBERTAS=y
-+#CONFIG_LIBERTAS_USB=m
+#NEED_LIBERTAS=y
endif
+ endif
ifneq ($(CONFIG_PCMCIA),)
CONFIG_LIBERTAS_CS=m
+-NEED_LIBERTAS=y
++#NEED_LIBERTAS=y
+ endif
+ ifeq ($(NEED_LIBERTAS),y)
+-CONFIG_LIBERTAS=m
++#CONFIG_LIBERTAS=m
+ # Libertas uses the old stack but not fully, it will soon
+ # be cleaned.
+ endif
diff --git a/package/mac80211/patches/300-arm_alignment_fix.patch b/package/mac80211/patches/300-arm_alignment_fix.patch
deleted file mode 100644
index 1de5ed48e4..0000000000
--- a/package/mac80211/patches/300-arm_alignment_fix.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-On ARM alignment is done slightly different from other architectures.
-struct ieee80211_tx_rate is aligned to word size, even though it only has 3
-single-byte members, which triggers the BUILD_BUG_ON in
-ieee80211_tx_info_clear_status
-
-This patch marks the struct ieee80211_tx_rate as packed, so that ARM
-behaves like the other architectures.
-
-Signed-off-by: Felix Fietkau <nbd@openwrt.org>
-
---- a/include/net/mac80211.h
-+++ b/include/net/mac80211.h
-@@ -299,7 +299,7 @@ struct ieee80211_tx_rate {
- s8 idx;
- u8 count;
- u8 flags;
--};
-+} __attribute__((packed));
-
- /**
- * struct ieee80211_tx_info - skb transmit information
diff --git a/package/mac80211/patches/300-rt2x00_hw_encryption.patch b/package/mac80211/patches/300-rt2x00_hw_encryption.patch
new file mode 100644
index 0000000000..51cb3264ac
--- /dev/null
+++ b/package/mac80211/patches/300-rt2x00_hw_encryption.patch
@@ -0,0 +1,248 @@
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 20 Nov 2008 22:29:36 +0000 (+0100)
+Subject: rt2x00: Implement HW encryption (rt2500usb)
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fivd%2Frt2x00.git;a=commitdiff_plain;h=52fe465ab5eb6aeead5ac8d91dd70e363d0560b7
+
+rt2x00: Implement HW encryption (rt2500usb)
+
+rt2500usb supports hardware encryption.
+rt2500usb supports up to 4 shared and pairwise keys.
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+
+diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
+index 10cb46a..620ac65 100644
+--- a/drivers/net/wireless/rt2x00/rt2500usb.c
++++ b/drivers/net/wireless/rt2x00/rt2500usb.c
+@@ -36,6 +36,13 @@
+ #include "rt2500usb.h"
+
+ /*
++ * Allow hardware encryption to be disabled.
++ */
++static int modparam_nohwcrypt = 0;
++module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
++MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
++
++/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
+ * rt2500usb_register_read and rt2500usb_register_write.
+@@ -323,6 +330,85 @@ static void rt2500usb_init_led(struct rt2x00_dev *rt2x00dev,
+ /*
+ * Configuration handlers.
+ */
++
++/*
++ * rt2500usb does not differentiate between shared and pairwise
++ * keys, so we should use the same function for both key types.
++ */
++static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
++ struct rt2x00lib_crypto *crypto,
++ struct ieee80211_key_conf *key)
++{
++ int timeout;
++ u32 mask;
++ u16 reg;
++
++ /* Support up to 4 keys */
++ if (key->hw_key_idx >= 4)
++ return -ENOSPC;
++
++ if (crypto->cmd == SET_KEY) {
++ /*
++ * Pairwise key will always be entry 0, but this
++ * could collide with a shared key on the same
++ * position...
++ */
++ mask = TXRX_CSR0_KEY_ID.bit_mask;
++
++ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
++
++ if ((reg & mask) && (reg & mask) == mask)
++ return -ENOSPC;
++
++ reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
++
++ key->hw_key_idx += reg ? ffz(reg) : 0;
++
++ /*
++ * The encryption key doesn't fit within the CSR cache,
++ * this means we should allocate it seperately and use
++ * rt2x00usb_vendor_request() to send the key to the hardware.
++ */
++ reg = KEY_ENTRY(key->hw_key_idx);
++ timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
++ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
++ USB_VENDOR_REQUEST_OUT, reg,
++ crypto->key,
++ sizeof(crypto->key),
++ timeout);
++
++ /*
++ * The driver does not support the IV/EIV generation
++ * in hardware. However it doesn't support the IV/EIV
++ * inside the ieee80211 frame either, but requires it
++ * to be provided seperately for the descriptor.
++ * rt2x00lib will cut the IV/EIV data out of all frames
++ * given to us by mac80211, but we must tell mac80211
++ * to generate the IV/EIV data.
++ */
++ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
++ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
++ }
++
++ /*
++ * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate
++ * a particular key is valid.
++ */
++ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
++ rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, crypto->cipher);
++ rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
++
++ mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
++ if (crypto->cmd == SET_KEY)
++ mask |= 1 << key->hw_key_idx;
++ else if (crypto->cmd == DISABLE_KEY)
++ mask &= ~(1 << key->hw_key_idx);
++ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, mask);
++ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
++
++ return 0;
++}
++
+ static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
+ const unsigned int filter_flags)
+ {
+@@ -844,7 +930,7 @@ static int rt2500usb_init_registers(struct rt2x00_dev *rt2x00dev)
+
+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
+ rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
+- rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
++ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
+ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
+
+ rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
+@@ -1066,7 +1152,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+ * Start writing the descriptor words.
+ */
+ rt2x00_desc_read(txd, 1, &word);
+- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
++ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
+ rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
+ rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
+ rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
+@@ -1079,6 +1165,11 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+ rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
+ rt2x00_desc_write(txd, 2, word);
+
++ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
++ _rt2x00_desc_write(txd, 3, skbdesc->iv);
++ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
++ }
++
+ rt2x00_desc_read(txd, 0, &word);
+ rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
+ rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
+@@ -1093,7 +1184,8 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+ test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
+ rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
+ rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
+- rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
++ rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
++ rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
+ rt2x00_desc_write(txd, 0, word);
+ }
+
+@@ -1204,6 +1296,7 @@ static void rt2500usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
+ struct rxdone_entry_desc *rxdesc)
+ {
++ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+ struct queue_entry_priv_usb *entry_priv = entry->priv_data;
+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ __le32 *rxd =
+@@ -1231,6 +1324,31 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
+ if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
+ rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
+
++ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
++ rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
++ if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
++ rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
++ }
++
++ if (rxdesc->cipher != CIPHER_NONE) {
++ _rt2x00_desc_read(rxd, 2, &rxdesc->iv);
++ _rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
++ /* ICV is located at the end of frame */
++
++ /*
++ * Hardware has stripped IV/EIV data from 802.11 frame during
++ * decryption. It has provided the data seperately but rt2x00lib
++ * should decide if it should be reinserted.
++ */
++ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
++ if (rxdesc->cipher != CIPHER_TKIP)
++ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
++ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
++ rxdesc->flags |= RX_FLAG_DECRYPTED;
++ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
++ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
++ }
++
+ /*
+ * Obtain the status about this packet.
+ * When frame was received with an OFDM bitrate,
+@@ -1238,8 +1356,8 @@ static void rt2500usb_fill_rxdone(struct queue_entry *entry,
+ * a CCK bitrate the signal is the rate in 100kbit/s.
+ */
+ rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
+- rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
+- entry->queue->rt2x00dev->rssi_offset;
++ rxdesc->rssi =
++ rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset;
+ rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
+
+ if (rt2x00_get_field32(word0, RXD_W0_OFDM))
+@@ -1729,6 +1847,8 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
+ __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
+ __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
++ if (!modparam_nohwcrypt)
++ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+ __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
+
+ /*
+@@ -1748,6 +1868,7 @@ static const struct ieee80211_ops rt2500usb_mac80211_ops = {
+ .config = rt2x00mac_config,
+ .config_interface = rt2x00mac_config_interface,
+ .configure_filter = rt2x00mac_configure_filter,
++ .set_key = rt2x00mac_set_key,
+ .get_stats = rt2x00mac_get_stats,
+ .bss_info_changed = rt2x00mac_bss_info_changed,
+ .conf_tx = rt2x00mac_conf_tx,
+@@ -1769,6 +1890,8 @@ static const struct rt2x00lib_ops rt2500usb_rt2x00_ops = {
+ .get_tx_data_len = rt2500usb_get_tx_data_len,
+ .kick_tx_queue = rt2500usb_kick_tx_queue,
+ .fill_rxdone = rt2500usb_fill_rxdone,
++ .config_shared_key = rt2500usb_config_key,
++ .config_pairwise_key = rt2500usb_config_key,
+ .config_filter = rt2500usb_config_filter,
+ .config_intf = rt2500usb_config_intf,
+ .config_erp = rt2500usb_config_erp,
+diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
+index dbb5d68..4347dfd 100644
+--- a/drivers/net/wireless/rt2x00/rt2500usb.h
++++ b/drivers/net/wireless/rt2x00/rt2500usb.h
+@@ -447,6 +447,9 @@
+ #define SEC_CSR30 0x04bc
+ #define SEC_CSR31 0x04be
+
++#define KEY_ENTRY(__idx) \
++ ( SEC_CSR0 + ((__idx) * 16) )
++
+ /*
+ * PHY control registers.
+ */
diff --git a/package/mac80211/patches/310-rt2800_experimental.patch b/package/mac80211/patches/310-rt2800_experimental.patch
index 90d41bd8d7..1874bb31b2 100644
--- a/package/mac80211/patches/310-rt2800_experimental.patch
+++ b/package/mac80211/patches/310-rt2800_experimental.patch
@@ -1,9 +1,22 @@
-automatically generated from wireless-testing..rt2x00/experimental
-do not edit
+From: Ivo van Doorn <IvDoorn@gmail.com>
+Date: Thu, 20 Nov 2008 22:42:04 +0000 (+0100)
+Subject: rt2x00: Add rt2800pci and rt2800usb (BROKEN)
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fivd%2Frt2x00.git;a=commitdiff_plain;h=760e9f904b54ab91cd78aac6188851cfaac5c795
+rt2x00: Add rt2800pci and rt2800usb (BROKEN)
+
+incomplete code...
+
+Signed-off-by: Mattias Nissler <mattias.nissler@gmx.de>
+Signed-off-by: Felix Fietkau <nbd@openwrt.org>
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+---
+
+diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
+index 917cb4f..99cec67 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
-@@ -14,5 +14,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00u
+@@ -14,5 +14,7 @@ obj-$(CONFIG_RT2X00_LIB_USB) += rt2x00usb.o
obj-$(CONFIG_RT2400PCI) += rt2400pci.o
obj-$(CONFIG_RT2500PCI) += rt2500pci.o
obj-$(CONFIG_RT61PCI) += rt61pci.o
@@ -11,240 +24,12 @@ do not edit
obj-$(CONFIG_RT2500USB) += rt2500usb.o
obj-$(CONFIG_RT73USB) += rt73usb.o
+obj-$(CONFIG_RT2800USB) += rt2800usb.o
---- a/drivers/net/wireless/rt2x00/rt2500usb.c
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
-@@ -36,6 +36,13 @@
- #include "rt2500usb.h"
-
- /*
-+ * Allow hardware encryption to be disabled.
-+ */
-+static int modparam_nohwcrypt = 0;
-+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-+
-+/*
- * Register access.
- * All access to the CSR registers will go through the methods
- * rt2500usb_register_read and rt2500usb_register_write.
-@@ -343,6 +350,85 @@ static void rt2500usb_init_led(struct rt
- /*
- * Configuration handlers.
- */
-+
-+/*
-+ * rt2500usb does not differentiate between shared and pairwise
-+ * keys, so we should use the same function for both key types.
-+ */
-+static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev,
-+ struct rt2x00lib_crypto *crypto,
-+ struct ieee80211_key_conf *key)
-+{
-+ int timeout;
-+ u32 mask;
-+ u16 reg;
-+
-+ /* Support up to 4 keys */
-+ if (key->hw_key_idx >= 4)
-+ return -ENOSPC;
-+
-+ if (crypto->cmd == SET_KEY) {
-+ /*
-+ * Pairwise key will always be entry 0, but this
-+ * could collide with a shared key on the same
-+ * position...
-+ */
-+ mask = TXRX_CSR0_KEY_ID.bit_mask;
-+
-+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
-+
-+ if ((reg & mask) && (reg & mask) == mask)
-+ return -ENOSPC;
-+
-+ reg = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
-+
-+ key->hw_key_idx += reg ? ffz(reg) : 0;
-+
-+ /*
-+ * The encryption key doesn't fit within the CSR cache,
-+ * this means we should allocate it seperately and use
-+ * rt2x00usb_vendor_request() to send the key to the hardware.
-+ */
-+ reg = KEY_ENTRY(key->hw_key_idx);
-+ timeout = REGISTER_TIMEOUT32(sizeof(crypto->key));
-+ rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT, reg,
-+ crypto->key,
-+ sizeof(crypto->key),
-+ timeout);
-+
-+ /*
-+ * The driver does not support the IV/EIV generation
-+ * in hardware. However it doesn't support the IV/EIV
-+ * inside the ieee80211 frame either, but requires it
-+ * to be provided seperately for the descriptor.
-+ * rt2x00lib will cut the IV/EIV data out of all frames
-+ * given to us by mac80211, but we must tell mac80211
-+ * to generate the IV/EIV data.
-+ */
-+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
-+ key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
-+ }
-+
-+ /*
-+ * TXRX_CSR0_KEY_ID contains only single-bit fields to indicate
-+ * a particular key is valid.
-+ */
-+ rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
-+ rt2x00_set_field16(&reg, TXRX_CSR0_ALGORITHM, crypto->cipher);
-+ rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
-+
-+ mask = rt2x00_get_field16(reg, TXRX_CSR0_KEY_ID);
-+ if (crypto->cmd == SET_KEY)
-+ mask |= 1 << key->hw_key_idx;
-+ else if (crypto->cmd == DISABLE_KEY)
-+ mask &= ~(1 << key->hw_key_idx);
-+ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, mask);
-+ rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-+
-+ return 0;
-+}
-+
- static void rt2500usb_config_filter(struct rt2x00_dev *rt2x00dev,
- const unsigned int filter_flags)
- {
-@@ -864,7 +950,7 @@ static int rt2500usb_init_registers(stru
-
- rt2500usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
- rt2x00_set_field16(&reg, TXRX_CSR0_IV_OFFSET, IEEE80211_HEADER);
-- rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0xff);
-+ rt2x00_set_field16(&reg, TXRX_CSR0_KEY_ID, 0);
- rt2500usb_register_write(rt2x00dev, TXRX_CSR0, reg);
-
- rt2500usb_register_read(rt2x00dev, MAC_CSR18, &reg);
-@@ -1086,7 +1172,7 @@ static void rt2500usb_write_tx_desc(stru
- * Start writing the descriptor words.
- */
- rt2x00_desc_read(txd, 1, &word);
-- rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
-+ rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, txdesc->iv_offset);
- rt2x00_set_field32(&word, TXD_W1_AIFS, txdesc->aifs);
- rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
- rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
-@@ -1099,6 +1185,11 @@ static void rt2500usb_write_tx_desc(stru
- rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
- rt2x00_desc_write(txd, 2, word);
-
-+ if (test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags)) {
-+ _rt2x00_desc_write(txd, 3, skbdesc->iv);
-+ _rt2x00_desc_write(txd, 4, skbdesc->eiv);
-+ }
-+
- rt2x00_desc_read(txd, 0, &word);
- rt2x00_set_field32(&word, TXD_W0_RETRY_LIMIT, txdesc->retry_limit);
- rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
-@@ -1113,7 +1204,8 @@ static void rt2500usb_write_tx_desc(stru
- test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags));
- rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
- rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len);
-- rt2x00_set_field32(&word, TXD_W0_CIPHER, CIPHER_NONE);
-+ rt2x00_set_field32(&word, TXD_W0_CIPHER, txdesc->cipher);
-+ rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx);
- rt2x00_desc_write(txd, 0, word);
- }
-
-@@ -1225,6 +1317,7 @@ static void rt2500usb_kick_tx_queue(stru
- static void rt2500usb_fill_rxdone(struct queue_entry *entry,
- struct rxdone_entry_desc *rxdesc)
- {
-+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
- struct queue_entry_priv_usb *entry_priv = entry->priv_data;
- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
- __le32 *rxd =
-@@ -1252,6 +1345,31 @@ static void rt2500usb_fill_rxdone(struct
- if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
- rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
-
-+ if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
-+ rxdesc->cipher = rt2x00_get_field32(word0, RXD_W0_CIPHER);
-+ if (rt2x00_get_field32(word0, RXD_W0_CIPHER_ERROR))
-+ rxdesc->cipher_status = RX_CRYPTO_FAIL_KEY;
-+ }
-+
-+ if (rxdesc->cipher != CIPHER_NONE) {
-+ _rt2x00_desc_read(rxd, 2, &rxdesc->iv);
-+ _rt2x00_desc_read(rxd, 3, &rxdesc->eiv);
-+ /* ICV is located at the end of frame */
-+
-+ /*
-+ * Hardware has stripped IV/EIV data from 802.11 frame during
-+ * decryption. It has provided the data seperately but rt2x00lib
-+ * should decide if it should be reinserted.
-+ */
-+ rxdesc->flags |= RX_FLAG_IV_STRIPPED;
-+ if (rxdesc->cipher != CIPHER_TKIP)
-+ rxdesc->flags |= RX_FLAG_MMIC_STRIPPED;
-+ if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
-+ rxdesc->flags |= RX_FLAG_DECRYPTED;
-+ else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
-+ rxdesc->flags |= RX_FLAG_MMIC_ERROR;
-+ }
-+
- /*
- * Obtain the status about this packet.
- * When frame was received with an OFDM bitrate,
-@@ -1259,8 +1377,8 @@ static void rt2500usb_fill_rxdone(struct
- * a CCK bitrate the signal is the rate in 100kbit/s.
- */
- rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
-- rxdesc->rssi = rt2x00_get_field32(word1, RXD_W1_RSSI) -
-- entry->queue->rt2x00dev->rssi_offset;
-+ rxdesc->rssi =
-+ rt2x00_get_field32(word1, RXD_W1_RSSI) - rt2x00dev->rssi_offset;
- rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
-
- if (rt2x00_get_field32(word0, RXD_W0_OFDM))
-@@ -1750,6 +1868,8 @@ static int rt2500usb_probe_hw(struct rt2
- __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags);
- __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
-+ if (!modparam_nohwcrypt)
-+ __set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
- __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
-
- /*
-@@ -1769,6 +1889,7 @@ static const struct ieee80211_ops rt2500
- .config = rt2x00mac_config,
- .config_interface = rt2x00mac_config_interface,
- .configure_filter = rt2x00mac_configure_filter,
-+ .set_key = rt2x00mac_set_key,
- .get_stats = rt2x00mac_get_stats,
- .bss_info_changed = rt2x00mac_bss_info_changed,
- .conf_tx = rt2x00mac_conf_tx,
-@@ -1791,6 +1912,8 @@ static const struct rt2x00lib_ops rt2500
- .get_tx_data_len = rt2500usb_get_tx_data_len,
- .kick_tx_queue = rt2500usb_kick_tx_queue,
- .fill_rxdone = rt2500usb_fill_rxdone,
-+ .config_shared_key = rt2500usb_config_key,
-+ .config_pairwise_key = rt2500usb_config_key,
- .config_filter = rt2500usb_config_filter,
- .config_intf = rt2500usb_config_intf,
- .config_erp = rt2500usb_config_erp,
---- a/drivers/net/wireless/rt2x00/rt2500usb.h
-+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
-@@ -447,6 +447,9 @@
- #define SEC_CSR30 0x04bc
- #define SEC_CSR31 0x04be
-
-+#define KEY_ENTRY(__idx) \
-+ ( SEC_CSR0 + ((__idx) * 16) )
-+
- /*
- * PHY control registers.
- */
+diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
+new file mode 100644
+index 0000000..65e9915
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
-@@ -0,0 +1,2556 @@
+@@ -0,0 +1,2576 @@
+/*
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
@@ -302,46 +87,37 @@ do not edit
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ */
-+static u32 rt2800pci_bbp_check(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ unsigned int i;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, BBP_CSR_CFG, &reg);
-+ if (!rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY))
-+ break;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ return reg;
-+}
++#define WAIT_FOR_BBP(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RF(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
++#define WAIT_FOR_MCU(__dev, __reg) \
++ rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
++ H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
-+ /*
-+ * Wait until the BBP becomes ready.
-+ */
-+ reg = rt2800pci_bbp_check(rt2x00dev);
-+ if (rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY)) {
-+ ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
-+ return;
-+ }
++ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
-+ * Write the data into the BBP.
++ * Wait until the BBP becomes available, afterwards we
++ * can safely write the new data into the register.
+ */
-+ reg = 0;
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
++ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
++
++ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
++ }
+
-+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -349,67 +125,86 @@ do not edit
+{
+ u32 reg;
+
-+ /*
-+ * Wait until the BBP becomes ready.
-+ */
-+ reg = rt2800pci_bbp_check(rt2x00dev);
-+ if (rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY)) {
-+ ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-+ return;
-+ }
++ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
-+ * Write the request into the BBP.
++ * Wait until the BBP becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
+ */
-+ reg = 0;
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
++ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
-+ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
++ rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
+
-+ /*
-+ * Wait until the BBP becomes ready.
-+ */
-+ reg = rt2800pci_bbp_check(rt2x00dev);
-+ if (rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY)) {
-+ ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
-+ *value = 0xff;
-+ return;
++ WAIT_FOR_BBP(rt2x00dev, &reg);
+ }
+
+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ u32 reg;
-+ unsigned int i;
+
+ if (!word)
+ return;
+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, RF_CSR_CFG0, &reg);
-+ if (!rt2x00_get_field32(reg, RF_CSR_CFG0_BUSY))
-+ goto rf_write;
-+ udelay(REGISTER_BUSY_DELAY);
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the RF becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RF(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
++
++ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
++ rt2x00_rf_write(rt2x00dev, word, value);
+ }
+
-+ ERROR(rt2x00dev, "RF_CSR_CFG0 register busy. Write failed.\n");
-+ return;
++ mutex_unlock(&rt2x00dev->csr_mutex);
++}
+
-+rf_write:
-+ reg = 0;
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
++static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
++ const u8 command, const u8 token,
++ const u8 arg0, const u8 arg1)
++{
++ u32 reg;
++
++ mutex_lock(&rt2x00dev->csr_mutex);
++
++ /*
++ * Wait until the MCU becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
++ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
++
++ reg = 0;
++ rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
++ rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
++ }
+
-+ rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
-+ rt2x00_rf_write(rt2x00dev, word, value);
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
@@ -442,37 +237,6 @@ do not edit
+ rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
+}
+
-+static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
-+ const u8 command, const u8 token,
-+ const u8 arg0, const u8 arg1)
-+{
-+ unsigned int i;
-+ u32 reg;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CSR, &reg);
-+ if (!rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER))
-+ goto mcu_write;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "mcu request error. "
-+ "Request 0x%02x failed for token 0x%02x.\n",
-+ command, token);
-+ return;
-+
-+mcu_write:
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
-+ rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
-+
-+ reg = 0;
-+ rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
-+ rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
-+}
-+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800pci_rt2x00debug = {
+ .owner = THIS_MODULE,
@@ -735,7 +499,8 @@ do not edit
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+ !(filter_flags & FIF_PROMISC_IN_BSS));
-+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
++ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD,
++ !(filter_flags & FIF_OTHER_BSS));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
@@ -1344,31 +1109,41 @@ do not edit
+/*
+ * Initialization functions.
+ */
-+static void rt2800pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
-+ struct queue_entry *entry)
++static bool rt2800pci_get_entry_state(struct queue_entry *entry)
+{
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
-+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ u32 word;
+
-+ rt2x00_desc_read(entry_priv->desc, 0, &word);
-+ rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
-+ rt2x00_desc_write(entry_priv->desc, 0, word);
++ if (entry->queue->qid == QID_RX) {
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++
++ return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
++ } else {
++ rt2x00_desc_read(entry_priv->desc, 0, &word);
+
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+ rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
-+ rt2x00_desc_write(entry_priv->desc, 1, word);
++ return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
++ }
+}
+
-+static void rt2800pci_init_txentry(struct rt2x00_dev *rt2x00dev,
-+ struct queue_entry *entry)
++static void rt2800pci_clear_entry(struct queue_entry *entry)
+{
+ struct queue_entry_priv_pci *entry_priv = entry->priv_data;
++ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+ u32 word;
+
-+ rt2x00_desc_read(entry_priv->desc, 1, &word);
-+ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
-+ rt2x00_desc_write(entry_priv->desc, 1, word);
++ if (entry->queue->qid == QID_RX) {
++ rt2x00_desc_read(entry_priv->desc, 0, &word);
++ rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
++ rt2x00_desc_write(entry_priv->desc, 0, word);
++
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++ rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
++ rt2x00_desc_write(entry_priv->desc, 1, word);
++ } else {
++ rt2x00_desc_read(entry_priv->desc, 1, &word);
++ rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
++ rt2x00_desc_write(entry_priv->desc, 1, word);
++ }
+}
+
+static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
@@ -1772,7 +1547,7 @@ do not edit
+static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
-+ int mask = (state == STATE_RADIO_IRQ_OFF);
++ int mask = (state == STATE_RADIO_IRQ_ON);
+ u32 reg;
+
+ /*
@@ -2082,11 +1857,13 @@ do not edit
+}
+
+static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
-+ const enum data_queue_qid queue)
++ const enum data_queue_qid queue_idx)
+{
++ struct data_queue *queue;
++ unsigned int idx, qidx = 0;
+ u32 reg;
+
-+ if (queue == QID_BEACON) {
++ if (queue_idx == QID_BEACON) {
+ rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
@@ -2097,7 +1874,18 @@ do not edit
+ return;
+ }
+
-+ /* FIXME: How can be kick normal TX queues? */
++ if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
++ return;
++
++ queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
++ idx = queue->index[Q_INDEX];
++
++ if (queue_idx == QID_MGMT)
++ qidx = 5;
++ else
++ qidx = queue_idx;
++
++ rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
+}
+
+/*
@@ -2191,8 +1979,25 @@ do not edit
+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+{
+ struct rt2x00_dev *rt2x00dev = dev_instance;
++ u32 reg;
+
-+ /* FIXME */
++ /* Read status and ACK all interrupts */
++ rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
++ rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
++
++ if (!reg)
++ return IRQ_NONE;
++
++ if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
++ return IRQ_HANDLED;
++
++ /*
++ * 1 - Rx ring done interrupt.
++ */
++ if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
++ rt2x00pci_rxdone(rt2x00dev);
++
++ /* TODO: TX DONE */
+
+ return IRQ_HANDLED;
+}
@@ -2701,8 +2506,8 @@ do not edit
+ .load_firmware = rt2800pci_load_firmware,
+ .initialize = rt2x00pci_initialize,
+ .uninitialize = rt2x00pci_uninitialize,
-+ .init_rxentry = rt2800pci_init_rxentry,
-+ .init_txentry = rt2800pci_init_txentry,
++ .get_entry_state = rt2800pci_get_entry_state,
++ .clear_entry = rt2800pci_clear_entry,
+ .set_device_state = rt2800pci_set_device_state,
+ .rfkill_poll = rt2800pci_rfkill_poll,
+ .link_stats = rt2800pci_link_stats,
@@ -2801,9 +2606,12 @@ do not edit
+
+module_init(rt2800pci_init);
+module_exit(rt2800pci_exit);
+diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
+new file mode 100644
+index 0000000..66593ed
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
-@@ -0,0 +1,1862 @@
+@@ -0,0 +1,1871 @@
+/*
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
@@ -3118,6 +2926,15 @@ do not edit
+#define TX_DTX_IDX5 0x028c
+
+/*
++ * Queue register offset macros
++ */
++#define TX_QUEUE_REG_OFFSET 0x10
++#define TX_BASE_PTR(__x) TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
++#define TX_MAX_CNT(__x) TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
++#define TX_CTX_IDX(__x) TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
++#define TX_DTX_IDX(__x) TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
++
++/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR 0x0290
@@ -4666,9 +4483,12 @@ do not edit
+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800PCI_H */
+diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
+new file mode 100644
+index 0000000..761a7ec
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
-@@ -0,0 +1,2594 @@
+@@ -0,0 +1,2498 @@
+/*
+ Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
+ <http://rt2x00.serialmonkey.com>
@@ -4717,7 +4537,7 @@ do not edit
+/*
+ * Register access.
+ * All access to the CSR registers will go through the methods
-+ * rt2800usb_register_read and rt2800usb_register_write.
++ * rt2x00usb_register_read and rt2x00usb_register_write.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers BBPCSR and RFCSR to achieve this.
+ * These indirect registers work with busy bits,
@@ -4726,113 +4546,38 @@ do not edit
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
-+ * The _lock versions must be used if you already hold the usb_cache_mutex
++ * The _lock versions must be used if you already hold the csr_mutex
+ */
-+static inline void rt2800usb_register_read(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int offset,
-+ u32 *value)
-+{
-+ __le32 reg;
-+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
-+ USB_VENDOR_REQUEST_IN, offset,
-+ &reg, sizeof(u32), REGISTER_TIMEOUT);
-+ *value = le32_to_cpu(reg);
-+}
-+
-+static inline void rt2800usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int offset,
-+ u32 *value)
-+{
-+ __le32 reg;
-+ rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
-+ USB_VENDOR_REQUEST_IN, offset,
-+ &reg, sizeof(u32), REGISTER_TIMEOUT);
-+ *value = le32_to_cpu(reg);
-+}
-+
-+static inline void rt2800usb_register_multiread(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int offset,
-+ void *value, const u32 length)
-+{
-+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
-+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
-+ USB_VENDOR_REQUEST_IN, offset,
-+ value, length, timeout);
-+}
-+
-+static inline void rt2800usb_register_write(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int offset,
-+ u32 value)
-+{
-+ __le32 reg = cpu_to_le32(value);
-+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT, offset,
-+ &reg, sizeof(u32), REGISTER_TIMEOUT);
-+}
-+
-+static inline void rt2800usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int offset,
-+ u32 value)
-+{
-+ __le32 reg = cpu_to_le32(value);
-+ rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT, offset,
-+ &reg, sizeof(u32), REGISTER_TIMEOUT);
-+}
-+
-+static inline void rt2800usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
-+ const unsigned int offset,
-+ void *value, const u32 length)
-+{
-+ int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
-+ rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
-+ USB_VENDOR_REQUEST_OUT, offset,
-+ value, length, timeout);
-+}
-+
-+static u32 rt2800usb_bbp_check(struct rt2x00_dev *rt2x00dev)
-+{
-+ u32 reg;
-+ unsigned int i;
-+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read_lock(rt2x00dev, BBP_CSR_CFG, &reg);
-+ if (!rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY))
-+ break;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ return reg;
-+}
++#define WAIT_FOR_BBP(__dev, __reg) \
++ rt2x00usb_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
++#define WAIT_FOR_RF(__dev, __reg) \
++ rt2x00usb_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
++#define WAIT_FOR_MCU(__dev, __reg) \
++ rt2x00usb_regbusy_read((__dev), H2M_MAILBOX_CSR, \
++ H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800usb_bbp_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u8 value)
+{
+ u32 reg;
+
-+ mutex_lock(&rt2x00dev->usb_cache_mutex);
++ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
-+ * Wait until the BBP becomes ready.
++ * Wait until the BBP becomes available, afterwards we
++ * can safely write the new data into the register.
+ */
-+ reg = rt2800usb_bbp_check(rt2x00dev);
-+ if (rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY)) {
-+ ERROR(rt2x00dev, "BBP_CSR_CFG register busy. Write failed.\n");
-+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
-+ return;
++ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
++
++ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+ }
+
-+ /*
-+ * Write the data into the BBP.
-+ */
-+ reg = 0;
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
-+
-+ rt2800usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
-+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_bbp_read(struct rt2x00_dev *rt2x00dev,
@@ -4840,113 +4585,93 @@ do not edit
+{
+ u32 reg;
+
-+ mutex_lock(&rt2x00dev->usb_cache_mutex);
-+
-+ /*
-+ * Wait until the BBP becomes ready.
-+ */
-+ reg = rt2800usb_bbp_check(rt2x00dev);
-+ if (rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY)) {
-+ ERROR(rt2x00dev, "BBP_CSR_CFG register busy. Read failed.\n");
-+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
-+ return;
-+ }
++ mutex_lock(&rt2x00dev->csr_mutex);
+
+ /*
-+ * Write the request into the BBP.
++ * Wait until the BBP becomes available, afterwards we
++ * can safely write the read request into the register.
++ * After the data has been written, we wait until hardware
++ * returns the correct value, if at any time the register
++ * doesn't become available in time, reg will be 0xffffffff
++ * which means we return 0xff to the caller.
+ */
-+ reg = 0;
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
-+ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
++ if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
++ rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+
-+ rt2800usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
++ rt2x00usb_register_write_lock(rt2x00dev, BBP_CSR_CFG, reg);
+
-+ /*
-+ * Wait until the BBP becomes ready.
-+ */
-+ reg = rt2800usb_bbp_check(rt2x00dev);
-+ if (rt2x00_get_field32(reg, BBP_CSR_CFG_BUSY)) {
-+ ERROR(rt2x00dev, "BBP_CSR_CFG register busy. Read failed.\n");
-+ *value = 0xff;
-+ return;
++ WAIT_FOR_BBP(rt2x00dev, &reg);
+ }
+
+ *value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
-+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
++
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_rf_write(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word, const u32 value)
+{
+ u32 reg;
-+ unsigned int i;
+
+ if (!word)
+ return;
+
-+ mutex_lock(&rt2x00dev->usb_cache_mutex);
++ mutex_lock(&rt2x00dev->csr_mutex);
+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read_lock(rt2x00dev, RF_CSR_CFG0, &reg);
-+ if (!rt2x00_get_field32(reg, RF_CSR_CFG0_BUSY))
-+ goto rf_write;
-+ udelay(REGISTER_BUSY_DELAY);
++ /*
++ * Wait until the RF becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_RF(rt2x00dev, &reg)) {
++ reg = 0;
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
++ rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
++
++ rt2x00usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
++ rt2x00_rf_write(rt2x00dev, word, value);
+ }
+
-+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
-+ ERROR(rt2x00dev, "RF_CSR_CFG0 register busy. Write failed.\n");
-+ return;
-+
-+rf_write:
-+ reg = 0;
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
-+ rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
-+
-+ rt2800usb_register_write_lock(rt2x00dev, RF_CSR_CFG0, reg);
-+ rt2x00_rf_write(rt2x00dev, word, value);
-+ mutex_unlock(&rt2x00dev->usb_cache_mutex);
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800usb_mcu_request(struct rt2x00_dev *rt2x00dev,
+ const u8 command, const u8 token,
+ const u8 arg0, const u8 arg1)
+{
-+ unsigned int i;
+ u32 reg;
+
-+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read(rt2x00dev, H2M_MAILBOX_CSR, &reg);
-+ if (!rt2x00_get_field32(reg, H2M_MAILBOX_CSR_OWNER))
-+ goto mcu_write;
-+ udelay(REGISTER_BUSY_DELAY);
-+ }
-+
-+ ERROR(rt2x00dev, "mcu request error. "
-+ "Request 0x%02x failed for token 0x%02x.\n",
-+ command, token);
-+ return;
++ mutex_lock(&rt2x00dev->csr_mutex);
+
-+mcu_write:
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
-+ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
-+ rt2800usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
++ /*
++ * Wait until the MCU becomes available, afterwards we
++ * can safely write the new data into the register.
++ */
++ if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
++ rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
++ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
++
++ reg = 0;
++ rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
++ rt2x00usb_register_write(rt2x00dev, HOST_CMD_CSR, reg);
++ }
+
-+ reg = 0;
-+ rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
-+ rt2800usb_register_write(rt2x00dev, HOST_CMD_CSR, reg);
++ mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800usb_rt2x00debug = {
+ .owner = THIS_MODULE,
+ .csr = {
-+ .read = rt2800usb_register_read,
-+ .write = rt2800usb_register_write,
++ .read = rt2x00usb_register_read,
++ .write = rt2x00usb_register_write,
+ .flags = RT2X00DEBUGFS_OFFSET,
+ .word_base = CSR_REG_BASE,
+ .word_size = sizeof(u32),
@@ -5021,7 +4746,7 @@ do not edit
+ container_of(led_cdev, struct rt2x00_led, led_dev);
+ u32 reg;
+
-+ rt2800usb_register_read(led->rt2x00dev, LED_CFG, &reg);
++ rt2x00usb_register_read(led->rt2x00dev, LED_CFG, &reg);
+ rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+ rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+ rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
@@ -5029,7 +4754,7 @@ do not edit
+ rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+ rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+ rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
-+ rt2800usb_register_write(led->rt2x00dev, LED_CFG, reg);
++ rt2x00usb_register_write(led->rt2x00dev, LED_CFG, reg);
+
+ return 0;
+}
@@ -5066,7 +4791,7 @@ do not edit
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+ (crypto->cmd == SET_KEY) ? crypto->bssidx : 0);
+ rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, 0);
-+ rt2800usb_register_write(rt2x00dev, offset, reg);
++ rt2x00usb_register_write(rt2x00dev, offset, reg);
+}
+
+static int rt2800usb_config_shared_key(struct rt2x00_dev *rt2x00dev,
@@ -5120,10 +4845,10 @@ do not edit
+ field.bit_mask = 0x7 << field.bit_offset;
+
+ offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
-+ rt2800usb_register_read(rt2x00dev, offset, &reg);
++ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, field,
+ (crypto->cmd == SET_KEY) ? crypto->cipher : 0);
-+ rt2800usb_register_write(rt2x00dev, offset, reg);
++ rt2x00usb_register_write(rt2x00dev, offset, reg);
+
+ /*
+ * Update WCID information
@@ -5194,14 +4919,15 @@ do not edit
+ * and broadcast frames will always be accepted since
+ * there is no filter for it at this time.
+ */
-+ rt2800usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+ !(filter_flags & FIF_FCSFAIL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+ !(filter_flags & FIF_PLCPFAIL));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+ !(filter_flags & FIF_PROMISC_IN_BSS));
-+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
++ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD,
++ !(filter_flags & FIF_OTHER_BSS));
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+ !(filter_flags & FIF_ALLMULTI));
@@ -5223,7 +4949,7 @@ do not edit
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 1);
+ rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+ !(filter_flags & FIF_CONTROL));
-+ rt2800usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+
+static void rt2800usb_config_intf(struct rt2x00_dev *rt2x00dev,
@@ -5242,16 +4968,16 @@ do not edit
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
+ beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
-+ rt2800usb_register_write(rt2x00dev, beacon_base, 0);
++ rt2x00usb_register_write(rt2x00dev, beacon_base, 0);
+
+ /*
+ * Enable synchronisation.
+ */
-+ rt2800usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
-+ rt2800usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ }
+
+ if (flags & CONFIG_UPDATE_MAC) {
@@ -5259,7 +4985,7 @@ do not edit
+ rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+ conf->mac[1] = cpu_to_le32(reg);
+
-+ rt2800usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
++ rt2x00usb_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+ conf->mac, sizeof(conf->mac));
+ }
+
@@ -5269,7 +4995,7 @@ do not edit
+ rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+ conf->bssid[1] = cpu_to_le32(reg);
+
-+ rt2800usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
++ rt2x00usb_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+ conf->bssid, sizeof(conf->bssid));
+ }
+}
@@ -5279,40 +5005,40 @@ do not edit
+{
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT,
+ erp->ack_timeout);
-+ rt2800usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+ !!erp->short_preamble);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+ !!erp->short_preamble);
-+ rt2800usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+ erp->cts_protection ? 2 : 0);
-+ rt2800usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
++ rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+ erp->basic_rates);
-+ rt2800usb_register_write(rt2x00dev, HT_BASIC_RATE,
++ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE,
+ erp->basic_rates >> 32);
+
-+ rt2800usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+ rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+ rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
-+ rt2800usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+ rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
-+ rt2800usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+}
+
+static void rt2800usb_config_ant(struct rt2x00_dev *rt2x00dev,
@@ -5501,10 +5227,10 @@ do not edit
+ rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+ }
+
-+ rt2800usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+ rt2x00_set_field32(&rf->rf3, TX_BAND_CFG_A, 0);
+ rt2x00_set_field32(&rf->rf3, TX_BAND_CFG_BG, 1);
-+ rt2800usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
+ } else {
+ rt2800usb_bbp_write(rt2x00dev, 82, 0xf2);
+
@@ -5513,13 +5239,13 @@ do not edit
+ else
+ rt2800usb_bbp_write(rt2x00dev, 75, 0x50);
+
-+ rt2800usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+ rt2x00_set_field32(&rf->rf3, TX_BAND_CFG_A, 1);
+ rt2x00_set_field32(&rf->rf3, TX_BAND_CFG_BG, 0);
-+ rt2800usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_BAND_CFG, reg);
+ }
+
-+ rt2800usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
++ rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+ msleep(1);
+}
@@ -5535,7 +5261,7 @@ do not edit
+ rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+ rt2800usb_bbp_write(rt2x00dev, 1, r1);
+
-+ rt2800usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
@@ -5544,9 +5270,9 @@ do not edit
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
-+ rt2800usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
-+ rt2800usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
@@ -5555,9 +5281,9 @@ do not edit
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
-+ rt2800usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
-+ rt2800usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
@@ -5566,9 +5292,9 @@ do not edit
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
-+ rt2800usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
-+ rt2800usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
@@ -5577,14 +5303,14 @@ do not edit
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
-+ rt2800usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
-+ rt2800usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+ rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
-+ rt2800usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800usb_config_retry_limit(struct rt2x00_dev *rt2x00dev,
@@ -5592,7 +5318,7 @@ do not edit
+{
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+ libconf->conf->short_frame_max_tx_count);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
@@ -5601,7 +5327,7 @@ do not edit
+ rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+ rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
-+ rt2800usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800usb_config_duration(struct rt2x00_dev *rt2x00dev,
@@ -5609,10 +5335,10 @@ do not edit
+{
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+ libconf->conf->beacon_int * 16);
-+ rt2800usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+
+static void rt2800usb_config(struct rt2x00_dev *rt2x00dev,
@@ -5644,13 +5370,13 @@ do not edit
+ /*
+ * Update FCS error count from register.
+ */
-+ rt2800usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
++ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+ qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+
+ /*
+ * Update False CCA count from register.
+ */
-+ rt2800usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
++ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+ qual->false_cca = rt2x00_get_field32(reg, RX_STA_CNT1_FALSE_CCA);
+}
+
@@ -5742,7 +5468,7 @@ do not edit
+ * Wait for stable hardware.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read(rt2x00dev, MAC_CSR0, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ if (reg && reg != ~0)
+ break;
+ msleep(1);
@@ -5762,8 +5488,8 @@ do not edit
+ data, len,
+ REGISTER_TIMEOUT32(len));
+
-+ rt2800usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
-+ rt2800usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
++ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
++ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+
+ /*
+ * Send firmware request to device to load firmware,
@@ -5781,7 +5507,7 @@ do not edit
+ * Wait for device to stabilize.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
++ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+ if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+ break;
+ msleep(1);
@@ -5795,8 +5521,8 @@ do not edit
+ /*
+ * Initialize firmware.
+ */
-+ rt2800usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
-+ rt2800usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
++ rt2x00usb_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
++ rt2x00usb_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ msleep(1);
+
+ return 0;
@@ -5814,7 +5540,7 @@ do not edit
+ * Wait untill BBP and RF are ready.
+ */
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read(rt2x00dev, MAC_CSR0, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ if (reg && reg != ~0)
+ break;
+ msleep(1);
@@ -5825,53 +5551,53 @@ do not edit
+ return -EBUSY;
+ }
+
-+ rt2800usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
-+ rt2800usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
++ rt2x00usb_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
++ rt2x00usb_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000);
+
-+ rt2800usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
-+ rt2800usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
++ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, 0x00000000);
+
+ rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE, 0,
+ USB_MODE_RESET, REGISTER_TIMEOUT);
+
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
-+ rt2800usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+ rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
-+ rt2800usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
-+ rt2800usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+ rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
-+ rt2800usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
-+ rt2800usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
-+ rt2800usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
++ rt2x00usb_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
++ rt2x00usb_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
-+ rt2800usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
-+ rt2800usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
-+ rt2800usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG0, 0x00040a06);
++ rt2x00usb_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+
-+ rt2800usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
@@ -5880,31 +5606,31 @@ do not edit
+ rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+ rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
-+ rt2800usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+ rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
-+ rt2800usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+ rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
-+ rt2800usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
++ rt2x00usb_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
-+ rt2800usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+ rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
-+ rt2800usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 3);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
@@ -5914,9 +5640,9 @@ do not edit
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2800usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 3);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
@@ -5926,9 +5652,9 @@ do not edit
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2800usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
@@ -5938,9 +5664,9 @@ do not edit
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2800usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
@@ -5950,9 +5676,9 @@ do not edit
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2800usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
@@ -5962,9 +5688,9 @@ do not edit
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
-+ rt2800usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
@@ -5974,11 +5700,11 @@ do not edit
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
-+ rt2800usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
++ rt2x00usb_register_write(rt2x00dev, PBF_CFG, 0xf40006);
+
-+ rt2800usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
@@ -5988,34 +5714,34 @@ do not edit
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_BIG_ENDIAN, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_HDR_SCATTER, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_HDR_SEG_LEN, 0);
-+ rt2800usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
-+ rt2800usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
++ rt2x00usb_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
++ rt2x00usb_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
-+ rt2800usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
-+ rt2800usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
-+ rt2800usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
++ rt2x00usb_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
++ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+ /*
+ * ASIC will keep garbage value after boot, clear encryption keys.
+ */
+ for (i = 0; i < 254; i++) {
+ u32 wcid[2] = { 0xffffffff, 0x0000ffff };
-+ rt2800usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
++ rt2x00usb_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+ wcid, sizeof(wcid));
+ }
+
+ for (i = 0; i < 4; i++)
-+ rt2800usb_register_write(rt2x00dev,
++ rt2x00usb_register_write(rt2x00dev,
+ SHARED_KEY_MODE_ENTRY(i), 0);
+
+ for (i = 0; i < 256; i++)
-+ rt2800usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
++ rt2x00usb_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+
+ /*
+ * Clear all beacons
@@ -6023,20 +5749,20 @@ do not edit
+ * the first byte since that byte contains the VALID and OWNER
+ * bits which (when set to 0) will invalidate the entire beacon.
+ */
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
-+ rt2800usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
-+
-+ rt2800usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
++ rt2x00usb_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
++
++ rt2x00usb_register_read(rt2x00dev, USB_CYC_CFG, &reg);
+ rt2x00_set_field32(&reg, USB_CYC_CFG_CLOCK_CYCLE, 30);
-+ rt2800usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, USB_CYC_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
++ rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
@@ -6045,9 +5771,9 @@ do not edit
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+ rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
-+ rt2800usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
++ rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
-+ rt2800usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
++ rt2x00usb_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
@@ -6056,9 +5782,9 @@ do not edit
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+ rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
-+ rt2800usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
++ rt2x00usb_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
-+ rt2800usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
++ rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 10);
@@ -6067,26 +5793,26 @@ do not edit
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 13);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 14);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 15);
-+ rt2800usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
++ rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
-+ rt2800usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
++ rt2x00usb_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+ rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
-+ rt2800usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
++ rt2x00usb_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+ /*
+ * We must clear the error counters.
+ * These registers are cleared on read,
+ * so we may pass a useless variable to store the value.
+ */
-+ rt2800usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
-+ rt2800usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
-+ rt2800usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
-+ rt2800usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
-+ rt2800usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
-+ rt2800usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
++ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT0, &reg);
++ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT1, &reg);
++ rt2x00usb_register_read(rt2x00dev, RX_STA_CNT2, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT0, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT1, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+ return 0;
+}
@@ -6097,7 +5823,7 @@ do not edit
+ u32 reg;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+ if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+ return 0;
+
@@ -6178,11 +5904,11 @@ do not edit
+{
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
+ (state == STATE_RADIO_RX_ON) ||
+ (state == STATE_RADIO_RX_ON_LINK));
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+}
+
+static int rt2800usb_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
@@ -6191,7 +5917,7 @@ do not edit
+ u32 reg;
+
+ for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
-+ rt2800usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+ !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+ return 0;
@@ -6216,35 +5942,35 @@ do not edit
+ rt2800usb_init_bbp(rt2x00dev)))
+ return -EIO;
+
-+ rt2800usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+ udelay(50);
+
-+ rt2800usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
-+ rt2800usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+
-+ rt2800usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, USB_DMA_CFG, &reg);
+ rt2x00_set_field32(&reg, USB_DMA_CFG_PHY_CLEAR, 0);
+ /* Don't use bulk in aggregation when working with USB 1.1 */
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_EN,
-+ (rt2x00dev->usb_maxpacket == 512));
++ (rt2x00dev->rx->usb_maxpacket == 512));
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_TIMEOUT, 128);
+ /* FIXME: Calculate this value based on Aggregation defines */
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_AGG_LIMIT, 21);
+ rt2x00_set_field32(&reg, USB_DMA_CFG_RX_BULK_EN, 1);
+ rt2x00_set_field32(&reg, USB_DMA_CFG_TX_BULK_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, USB_DMA_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+ rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+ /*
+ * Initialize LED control
@@ -6273,14 +5999,14 @@ do not edit
+{
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+ rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
-+ rt2800usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
-+ rt2800usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
-+ rt2800usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
-+ rt2800usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
++ rt2x00usb_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
++ rt2x00usb_register_write(rt2x00dev, PWR_PIN_CFG, 0);
++ rt2x00usb_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+ /* Wait for DMA, ignore error */
+ rt2800usb_wait_wpdma_ready(rt2x00dev);
@@ -6291,7 +6017,7 @@ do not edit
+static int rt2800usb_set_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
-+ rt2800usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
++ rt2x00usb_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+ if (state == STATE_AWAKE)
+ rt2800usb_mcu_request(rt2x00dev, MCU_WAKEUP, 0xff, 0, 0);
@@ -6457,11 +6183,11 @@ do not edit
+ * Disable beaconing while we are reloading the beacon data,
+ * otherwise we might be sending out invalid data.
+ */
-+ rt2800usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
-+ rt2800usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+ /*
+ * Write entire beacon with descriptor to register.
@@ -6479,8 +6205,7 @@ do not edit
+ entry->skb = NULL;
+}
+
-+static int rt2800usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
-+ struct sk_buff *skb)
++static int rt2800usb_get_tx_data_len(struct queue_entry *entry)
+{
+ int length;
+
@@ -6488,8 +6213,8 @@ do not edit
+ * The length _must_ be a multiple of 4,
+ * but it must _not_ be a multiple of the USB packet size.
+ */
-+ length = roundup(skb->len, 4);
-+ length += (4 * !(length % rt2x00dev->usb_maxpacket));
++ length = roundup(entry->skb->len, 4);
++ length += (4 * !(length % entry->queue->usb_maxpacket));
+
+ return length;
+}
@@ -6504,12 +6229,12 @@ do not edit
+ return;
+ }
+
-+ rt2800usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+ if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+ rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
-+ rt2800usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+ }
+}
+
@@ -6719,7 +6444,7 @@ do not edit
+ * Identify RF chipset.
+ */
+ value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
-+ rt2800usb_register_read(rt2x00dev, MAC_CSR0, &reg);
++ rt2x00usb_register_read(rt2x00dev, MAC_CSR0, &reg);
+ rev = rt2x00_get_field32(reg, MAC_CSR0_ASIC_REV);
+ rt2x00_set_chip(rt2x00dev, RT2870, value, rev);
+
@@ -6957,33 +6682,33 @@ do not edit
+ struct rt2x00_dev *rt2x00dev = hw->priv;
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+ rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
-+ rt2800usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+ rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, 1);
-+ rt2800usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+ return 0;
+}
@@ -7015,43 +6740,43 @@ do not edit
+ field.bit_offset = queue_idx * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
-+ rt2800usb_register_read(rt2x00dev, WMM_TXOP0_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WMM_TXOP0_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
-+ rt2800usb_register_write(rt2x00dev, WMM_TXOP0_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WMM_TXOP0_CFG, reg);
+ } else if (queue_idx < 4) {
+ field.bit_offset = (queue_idx - 2) * 16;
+ field.bit_mask = 0xffff << field.bit_offset;
+
-+ rt2800usb_register_read(rt2x00dev, WMM_TXOP1_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WMM_TXOP1_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->txop);
-+ rt2800usb_register_write(rt2x00dev, WMM_TXOP1_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WMM_TXOP1_CFG, reg);
+ }
+
+ /* Update WMM registers */
+ field.bit_offset = queue_idx * 4;
+ field.bit_mask = 0xf << field.bit_offset;
+
-+ rt2800usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->aifs);
-+ rt2800usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_min);
-+ rt2800usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
-+ rt2800usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
++ rt2x00usb_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+ rt2x00_set_field32(&reg, field, queue->cw_max);
-+ rt2800usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
++ rt2x00usb_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+ /* Update EDCA registers */
+ if (queue_idx < 4) {
+ offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
-+ rt2800usb_register_read(rt2x00dev, offset, &reg);
++ rt2x00usb_register_read(rt2x00dev, offset, &reg);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+ rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
-+ rt2800usb_register_write(rt2x00dev, offset, reg);
++ rt2x00usb_register_write(rt2x00dev, offset, reg);
+ }
+
+ return 0;
@@ -7070,9 +6795,9 @@ do not edit
+ u64 tsf;
+ u32 reg;
+
-+ rt2800usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
++ rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+ tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
-+ rt2800usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
++ rt2x00usb_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+ tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+ return tsf;
@@ -7106,8 +6831,7 @@ do not edit
+ .load_firmware = rt2800usb_load_firmware,
+ .initialize = rt2x00usb_initialize,
+ .uninitialize = rt2x00usb_uninitialize,
-+ .init_rxentry = rt2x00usb_init_rxentry,
-+ .init_txentry = rt2x00usb_init_txentry,
++ .clear_entry = rt2x00usb_clear_entry,
+ .set_device_state = rt2800usb_set_device_state,
+ .link_stats = rt2800usb_link_stats,
+ .reset_tuner = rt2800usb_reset_tuner,
@@ -7263,6 +6987,9 @@ do not edit
+
+module_init(rt2800usb_init);
+module_exit(rt2800usb_exit);
+diff --git a/drivers/net/wireless/rt2x00/rt2800usb.h b/drivers/net/wireless/rt2x00/rt2800usb.h
+new file mode 100644
+index 0000000..1843217
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800usb.h
@@ -0,0 +1,1884 @@
@@ -9150,9 +8877,11 @@ do not edit
+ clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800USB_H */
+diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
+index 780ba73..f462424 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
-@@ -97,6 +97,7 @@
+@@ -107,6 +107,7 @@
*/
#define ACK_SIZE 14
#define IEEE80211_HEADER 24
@@ -9160,7 +8889,7 @@ do not edit
#define PLCP 48
#define BEACON 100
#define PREAMBLE 144
-@@ -127,6 +128,11 @@ struct rt2x00_chip {
+@@ -137,6 +138,11 @@ struct rt2x00_chip {
#define RT2561 0x0302
#define RT2661 0x0401
#define RT2571 0x1300
@@ -9172,9 +8901,11 @@ do not edit
u16 rf;
u32 rev;
+diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
+index 7fc1d76..853cc51 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -658,7 +658,9 @@ void rt2x00lib_rxdone(struct rt2x00_dev
+@@ -659,7 +659,9 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
if (((rxdesc.dev_flags & RXDONE_SIGNAL_PLCP) &&
(rate->plcp == rxdesc.signal)) ||
((rxdesc.dev_flags & RXDONE_SIGNAL_BITRATE) &&
@@ -9185,7 +8916,7 @@ do not edit
idx = i;
break;
}
-@@ -690,6 +692,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev
+@@ -691,6 +693,7 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
rx_status->qual =
rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc.rssi);
rx_status->signal = rxdesc.rssi;
@@ -9193,35 +8924,35 @@ do not edit
rx_status->flag = rxdesc.flags;
rx_status->antenna = rt2x00dev->link.ant.active.rx;
-@@ -721,72 +724,84 @@ const struct rt2x00_rate rt2x00_supporte
+@@ -722,72 +725,84 @@ const struct rt2x00_rate rt2x00_supported_rates[12] = {
.bitrate = 10,
.ratemask = BIT(0),
.plcp = 0x00,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 0),
},
{
- .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 20,
.ratemask = BIT(1),
.plcp = 0x01,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 1),
},
{
- .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 55,
.ratemask = BIT(2),
.plcp = 0x02,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 2),
},
{
- .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
+ .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
.bitrate = 110,
.ratemask = BIT(3),
.plcp = 0x03,
+ .mcs = RATE_MCS(RATE_MODE_CCK, 3),
},
{
- .flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
+ .flags = DEV_RATE_OFDM,
.bitrate = 60,
.ratemask = BIT(4),
.plcp = 0x0b,
@@ -9235,7 +8966,7 @@ do not edit
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
},
{
- .flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
+ .flags = DEV_RATE_OFDM,
.bitrate = 120,
.ratemask = BIT(6),
.plcp = 0x0a,
@@ -9249,7 +8980,7 @@ do not edit
+ .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
},
{
- .flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
+ .flags = DEV_RATE_OFDM,
.bitrate = 240,
.ratemask = BIT(8),
.plcp = 0x09,
@@ -9278,9 +9009,11 @@ do not edit
},
};
+diff --git a/drivers/net/wireless/rt2x00/rt2x00lib.h b/drivers/net/wireless/rt2x00/rt2x00lib.h
+index 9399733..b6aa417 100644
--- a/drivers/net/wireless/rt2x00/rt2x00lib.h
+++ b/drivers/net/wireless/rt2x00/rt2x00lib.h
-@@ -49,6 +49,7 @@ struct rt2x00_rate {
+@@ -48,6 +48,7 @@ struct rt2x00_rate {
unsigned short ratemask;
unsigned short plcp;
@@ -9288,7 +9021,7 @@ do not edit
};
extern const struct rt2x00_rate rt2x00_supported_rates[12];
-@@ -69,6 +70,9 @@ static inline int rt2x00_get_rate_preamb
+@@ -68,6 +69,9 @@ static inline int rt2x00_get_rate_preamble(const u16 hw_value)
return (hw_value & 0xff00);
}
@@ -9298,9 +9031,11 @@ do not edit
/*
* Radio control handlers.
*/
+diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
+index b8de9d2..effe93e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
-@@ -303,6 +303,19 @@ static void rt2x00queue_create_tx_descri
+@@ -303,6 +303,19 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
}
/*
@@ -9320,7 +9055,7 @@ do not edit
* PLCP setup
* Length calculation depends on OFDM/CCK rate.
*/
-@@ -342,6 +355,20 @@ static void rt2x00queue_create_tx_descri
+@@ -342,6 +355,20 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry,
if (rt2x00_get_rate_preamble(rate->hw_value))
txdesc->signal |= 0x08;
}
@@ -9341,9 +9076,11 @@ do not edit
}
static void rt2x00queue_write_tx_descriptor(struct queue_entry *entry,
+diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
+index 2e99ab5..1772cdd 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
-@@ -147,12 +147,14 @@ static inline struct skb_frame_desc* get
+@@ -147,12 +147,14 @@ static inline struct skb_frame_desc* get_skb_frame_desc(struct sk_buff *skb)
*
* @RXDONE_SIGNAL_PLCP: Signal field contains the plcp value.
* @RXDONE_SIGNAL_BITRATE: Signal field contains the bitrate value.
@@ -9420,6 +9157,8 @@ do not edit
short retry_limit;
short aifs;
short ifs;
+diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h
+index c2fba7c..52cc166 100644
--- a/drivers/net/wireless/rt2x00/rt2x00reg.h
+++ b/drivers/net/wireless/rt2x00/rt2x00reg.h
@@ -67,6 +67,16 @@ enum tsf_sync {
diff --git a/package/mac80211/patches/320-enable_rt2800.patch b/package/mac80211/patches/320-enable_rt2800.patch
index 996b47de6f..f2b600d5da 100644
--- a/package/mac80211/patches/320-enable_rt2800.patch
+++ b/package/mac80211/patches/320-enable_rt2800.patch
@@ -1,6 +1,8 @@
+diff --git a/config.mk b/config.mk
+index d94a976..a624bdf 100644
--- a/config.mk
+++ b/config.mk
-@@ -146,6 +146,7 @@ CONFIG_ADM8211=m
+@@ -156,6 +156,7 @@ CONFIG_ADM8211=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2400PCI=m
CONFIG_RT2500PCI=m
@@ -8,3 +10,11 @@
NEED_RT2X00=y
# Two rt2x00 drivers require firmware: rt61pci and rt73usb. They depend on
+@@ -197,6 +198,7 @@ CONFIG_RTL8187=m
+ # RT2500USB does not require firmware
+ CONFIG_RT2500USB=m
+ CONFIG_RT2X00_LIB_USB=m
++CONFIG_RT2X00_LIB_CRYPTO=y
+ NEED_RT2X00=y
+ # RT73USB requires firmware
+ ifneq ($(CONFIG_CRC_ITU_T),)