aboutsummaryrefslogtreecommitdiffstats
path: root/package/mac80211/patches/000-kconfig.patch
diff options
context:
space:
mode:
Diffstat (limited to 'package/mac80211/patches/000-kconfig.patch')
-rw-r--r--package/mac80211/patches/000-kconfig.patch201
1 files changed, 0 insertions, 201 deletions
diff --git a/package/mac80211/patches/000-kconfig.patch b/package/mac80211/patches/000-kconfig.patch
deleted file mode 100644
index bcbf8868b5..0000000000
--- a/package/mac80211/patches/000-kconfig.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- /dev/null
-+++ b/net/mac80211/Kconfig
-@@ -0,0 +1,198 @@
-+config MAC80211
-+ tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
-+ select CRYPTO
-+ select CRYPTO_ECB
-+ select CRYPTO_ARC4
-+ select CRYPTO_AES
-+ select CRC32
-+ select WIRELESS_EXT
-+ select CFG80211
-+ ---help---
-+ This option enables the hardware independent IEEE 802.11
-+ networking stack.
-+
-+menu "Rate control algorithm selection"
-+ depends on MAC80211 != n
-+
-+config MAC80211_RC_PID
-+ bool "PID controller based rate control algorithm" if EMBEDDED
-+ default y
-+ ---help---
-+ This option enables a TX rate control algorithm for
-+ mac80211 that uses a PID controller to select the TX
-+ rate.
-+
-+choice
-+ prompt "Default rate control algorithm"
-+ default MAC80211_RC_DEFAULT_PID
-+ ---help---
-+ This option selects the default rate control algorithm
-+ mac80211 will use. Note that this default can still be
-+ overriden through the ieee80211_default_rc_algo module
-+ parameter if different algorithms are available.
-+
-+config MAC80211_RC_DEFAULT_PID
-+ bool "PID controller based rate control algorithm"
-+ depends on MAC80211_RC_PID
-+ ---help---
-+ Select the PID controller based rate control as the
-+ default rate control algorithm. You should choose
-+ this unless you know what you are doing.
-+
-+endchoice
-+
-+config MAC80211_RC_DEFAULT
-+ string
-+ default "pid" if MAC80211_RC_DEFAULT_PID
-+ default ""
-+
-+endmenu
-+
-+config MAC80211_MESH
-+ bool "Enable mac80211 mesh networking (pre-802.11s) support"
-+ depends on MAC80211 && EXPERIMENTAL
-+ ---help---
-+ This options enables support of Draft 802.11s mesh networking.
-+ The implementation is based on Draft 1.08 of the Mesh Networking
-+ amendment. For more information visit http://o11s.org/.
-+
-+
-+config MAC80211_LEDS
-+ bool "Enable LED triggers"
-+ depends on MAC80211
-+ select NEW_LEDS
-+ select LEDS_TRIGGERS
-+ ---help---
-+ This option enables a few LED triggers for different
-+ packet receive/transmit events.
-+
-+config MAC80211_DEBUGFS
-+ bool "Export mac80211 internals in DebugFS"
-+ depends on MAC80211 && DEBUG_FS
-+ ---help---
-+ Select this to see extensive information about
-+ the internal state of mac80211 in debugfs.
-+
-+ Say N unless you know you need this.
-+
-+menuconfig MAC80211_DEBUG_MENU
-+ bool "Select mac80211 debugging features"
-+ depends on MAC80211
-+ ---help---
-+ This option collects various mac80211 debug settings.
-+
-+config MAC80211_DEBUG_PACKET_ALIGNMENT
-+ bool "Enable packet alignment debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ This option is recommended for driver authors and strongly
-+ discouraged for everybody else, it will trigger a warning
-+ when a driver hands mac80211 a buffer that is aligned in
-+ a way that will cause problems with the IP stack on some
-+ architectures.
-+
-+ Say N unless you're writing a mac80211 based driver.
-+
-+config MAC80211_NOINLINE
-+ bool "Do not inline TX/RX handlers"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ This option affects code generation in mac80211, when
-+ selected some functions are marked "noinline" to allow
-+ easier debugging of problems in the transmit and receive
-+ paths.
-+
-+ This option increases code size a bit and inserts a lot
-+ of function calls in the code, but is otherwise safe to
-+ enable.
-+
-+ If unsure, say N unless you expect to be finding problems
-+ in mac80211.
-+
-+config MAC80211_VERBOSE_DEBUG
-+ bool "Verbose debugging output"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out
-+ many debugging messages. It should not be selected
-+ on production systems as some of the messages are
-+ remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_HT_DEBUG
-+ bool "Verbose HT debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ This option enables 802.11n High Throughput features
-+ debug tracing output.
-+
-+ It should not be selected on production systems as some
-+ of the messages are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_TKIP_DEBUG
-+ bool "Verbose TKIP debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out
-+ very verbose TKIP debugging messages. It should not
-+ be selected on production systems as those messages
-+ are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_IBSS_DEBUG
-+ bool "Verbose IBSS debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out
-+ very verbose IBSS debugging messages. It should not
-+ be selected on production systems as those messages
-+ are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_VERBOSE_PS_DEBUG
-+ bool "Verbose powersave mode debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Selecting this option causes mac80211 to print out very
-+ verbose power save mode debugging messages (when mac80211
-+ is an AP and has power saving stations.)
-+ It should not be selected on production systems as those
-+ messages are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_VERBOSE_MPL_DEBUG
-+ bool "Verbose mesh peer link debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ depends on MAC80211_MESH
-+ ---help---
-+ Selecting this option causes mac80211 to print out very
-+ verbose mesh peer link debugging messages (when mac80211
-+ is taking part in a mesh network).
-+ It should not be selected on production systems as those
-+ messages are remotely triggerable.
-+
-+ Do not select this option.
-+
-+config MAC80211_DEBUG_COUNTERS
-+ bool "Extra statistics for TX/RX debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ depends on MAC80211_DEBUGFS
-+ ---help---
-+ Selecting this option causes mac80211 to keep additional
-+ and very verbose statistics about TX and RX handler use
-+ and show them in debugfs.
-+
-+ If unsure, say N.
-+
-+config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
-+ bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
-+ depends on MAC80211_DEBUG_MENU
-+ ---help---
-+ Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
-+ debug messages.