diff options
Diffstat (limited to 'arch/arm/mach-ixp2000/ixdp2800.c')
| -rw-r--r-- | arch/arm/mach-ixp2000/ixdp2800.c | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c new file mode 100644 index 00000000..cd4c9bcf --- /dev/null +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -0,0 +1,294 @@ +/* + * arch/arm/mach-ixp2000/ixdp2800.c + * + * IXDP2800 platform support + * + * Original Author: Jeffrey Daly <jeffrey.daly@intel.com> + * Maintainer: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (C) 2002 Intel Corp. + * Copyright (C) 2003-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/bitops.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <asm/irq.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/system.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#include <asm/mach/pci.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> +#include <asm/mach/time.h> +#include <asm/mach/flash.h> +#include <asm/mach/arch.h> + +/************************************************************************* + * IXDP2800 timer tick + *************************************************************************/ + +static void __init ixdp2800_timer_init(void) +{ + ixp2000_init_time(50000000); +} + +static struct sys_timer ixdp2800_timer = { + .init = ixdp2800_timer_init, + .offset = ixp2000_gettimeoffset, +}; + +/************************************************************************* + * IXDP2800 PCI + *************************************************************************/ +static void __init ixdp2800_slave_disable_pci_master(void) +{ + *IXP2000_PCI_CMDSTAT &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); +} + +static void __init ixdp2800_master_wait_for_slave(void) +{ + volatile u32 *addr; + + printk(KERN_INFO "IXDP2800: waiting for slave NPU to configure " + "its BAR sizes\n"); + + addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, + PCI_BASE_ADDRESS_1); + do { + *addr = 0xffffffff; + cpu_relax(); + } while (*addr != 0xfe000008); + + addr = ixp2000_pci_config_addr(0, IXDP2X00_SLAVE_NPU_DEVFN, + PCI_BASE_ADDRESS_2); + do { + *addr = 0xffffffff; + cpu_relax(); + } while (*addr != 0xc0000008); + + /* + * Configure the slave's SDRAM BAR by hand. + */ + *addr = 0x40000008; +} + +static void __init ixdp2800_slave_wait_for_master_enable(void) +{ + printk(KERN_INFO "IXDP2800: waiting for master NPU to enable us\n"); + + while ((*IXP2000_PCI_CMDSTAT & PCI_COMMAND_MASTER) == 0) + cpu_relax(); +} + +void __init ixdp2800_pci_preinit(void) +{ + printk("ixdp2x00_pci_preinit called\n"); + + *IXP2000_PCI_ADDR_EXT = 0x0001e000; + + if (!ixdp2x00_master_npu()) + ixdp2800_slave_disable_pci_master(); + + *IXP2000_PCI_SRAM_BASE_ADDR_MASK = (0x2000000 - 1) & ~0x3ffff; + *IXP2000_PCI_DRAM_BASE_ADDR_MASK = (0x40000000 - 1) & ~0xfffff; + + ixp2000_pci_preinit(); + + if (ixdp2x00_master_npu()) { + /* + * Wait until the slave set its SRAM/SDRAM BAR sizes + * correctly before we proceed to scan and enumerate + * the bus. + */ + ixdp2800_master_wait_for_slave(); + + /* + * We configure the SDRAM BARs by hand because they + * are 1G and fall outside of the regular allocated + * PCI address space. + */ + *IXP2000_PCI_SDRAM_BAR = 0x00000008; + } else { + /* + * Wait for the master to complete scanning the bus + * and assigning resources before we proceed to scan + * the bus ourselves. Set pci=firmware to honor the + * master's resource assignment. + */ + ixdp2800_slave_wait_for_master_enable(); + pcibios_setup("firmware"); + } +} + +/* + * We assign the SDRAM BARs for the two IXP2800 CPUs by hand, outside + * of the regular PCI window, because there's only 512M of outbound PCI + * memory window on each IXP, while we need 1G for each of the BARs. + */ +static void __devinit ixp2800_pci_fixup(struct pci_dev *dev) +{ + if (machine_is_ixdp2800()) { + dev->resource[2].start = 0; + dev->resource[2].end = 0; + dev->resource[2].flags = 0; + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IXP2800, ixp2800_pci_fixup); + +static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) +{ + sys->mem_offset = 0x00000000; + + ixp2000_pci_setup(nr, sys); + + return 1; +} + +static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + if (ixdp2x00_master_npu()) { + + /* + * Root bus devices. Slave NPU is only one with interrupt. + * Everything else, we just return -1 which is invalid. + */ + if(!dev->bus->self) { + if(dev->devfn == IXDP2X00_SLAVE_NPU_DEVFN ) + return IRQ_IXDP2800_INGRESS_NPU; + + return -1; + } + + /* + * Bridge behind the PMC slot. + */ + if(dev->bus->self->devfn == IXDP2X00_PMC_DEVFN && + dev->bus->parent->self->devfn == IXDP2X00_P2P_DEVFN && + !dev->bus->parent->self->bus->parent) + return IRQ_IXDP2800_PMC; + + /* + * Device behind the first bridge + */ + if(dev->bus->self->devfn == IXDP2X00_P2P_DEVFN) { + switch(dev->devfn) { + case IXDP2X00_PMC_DEVFN: + return IRQ_IXDP2800_PMC; + + case IXDP2800_MASTER_ENET_DEVFN: + return IRQ_IXDP2800_EGRESS_ENET; + + case IXDP2800_SWITCH_FABRIC_DEVFN: + return IRQ_IXDP2800_FABRIC; + } + } + + return -1; + } else return IRQ_IXP2000_PCIB; /* Slave NIC interrupt */ +} + +static void __init ixdp2800_master_enable_slave(void) +{ + volatile u32 *addr; + + printk(KERN_INFO "IXDP2800: enabling slave NPU\n"); + + addr = (volatile u32 *)ixp2000_pci_config_addr(0, + IXDP2X00_SLAVE_NPU_DEVFN, + PCI_COMMAND); + + *addr |= PCI_COMMAND_MASTER; +} + +static void __init ixdp2800_master_wait_for_slave_bus_scan(void) +{ + volatile u32 *addr; + + printk(KERN_INFO "IXDP2800: waiting for slave to finish bus scan\n"); + + addr = (volatile u32 *)ixp2000_pci_config_addr(0, + IXDP2X00_SLAVE_NPU_DEVFN, + PCI_COMMAND); + while ((*addr & PCI_COMMAND_MEMORY) == 0) + cpu_relax(); +} + +static void __init ixdp2800_slave_signal_bus_scan_completion(void) +{ + printk(KERN_INFO "IXDP2800: bus scan done, signaling master\n"); + *IXP2000_PCI_CMDSTAT |= PCI_COMMAND_MEMORY; +} + +static void __init ixdp2800_pci_postinit(void) +{ + if (!ixdp2x00_master_npu()) { + ixdp2x00_slave_pci_postinit(); + ixdp2800_slave_signal_bus_scan_completion(); + } +} + +struct __initdata hw_pci ixdp2800_pci __initdata = { + .nr_controllers = 1, + .setup = ixdp2800_pci_setup, + .preinit = ixdp2800_pci_preinit, + .postinit = ixdp2800_pci_postinit, + .scan = ixp2000_pci_scan_bus, + .map_irq = ixdp2800_pci_map_irq, +}; + +int __init ixdp2800_pci_init(void) +{ + if (machine_is_ixdp2800()) { + struct pci_dev *dev; + + pci_common_init(&ixdp2800_pci); + if (ixdp2x00_master_npu()) { + dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); + pci_remove_bus_device(dev); + pci_dev_put(dev); + + ixdp2800_master_enable_slave(); + ixdp2800_master_wait_for_slave_bus_scan(); + } else { + dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); + pci_remove_bus_device(dev); + pci_dev_put(dev); + } + } + + return 0; +} + +subsys_initcall(ixdp2800_pci_init); + +void __init ixdp2800_init_irq(void) +{ + ixdp2x00_init_irq(IXDP2800_CPLD_INT_STAT, IXDP2800_CPLD_INT_MASK, IXDP2800_NR_IRQS); +} + +MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform") + /* Maintainer: MontaVista Software, Inc. */ + .boot_params = 0x00000100, + .map_io = ixdp2x00_map_io, + .init_irq = ixdp2800_init_irq, + .timer = &ixdp2800_timer, + .init_machine = ixdp2x00_init_machine, +MACHINE_END + |