5 files changed, 141 insertions, 0 deletions
diff --git a/tests/arch/xilinx/dsp_cascade.ys b/tests/arch/xilinx/dsp_cascade.ys
new file mode 100644
index 000000000..f9185551b
--- /dev/null
+++ b/tests/arch/xilinx/dsp_cascade.ys
@@ -0,0 +1,89 @@
+design -reset
+read_verilog <<EOT
+module cascade(input clk, input [4:0] a, input [4:0] b, output reg [9:0] o);
+reg [4:0] ar1, ar2, ar3, br1, br2, br3;
+reg [9:0] m, n;
+always @(posedge clk) begin
+ar1 <= a;
+ar2 <= ar1;
+ar3 <= ar2;
+br1 <= b;
+br2 <= br1;
+br3 <= br2;
+m <= ar1 * br1;
+n <= ar2 * br2 + m;
+o <= ar3 * br3 + n;
+end
+endmodule
+EOT
+proc
+design -save read
+
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx
+design -load postopt
+cd cascade
+select -assert-count 3 t:DSP48E1
+select -assert-none t:DSP48E1 t:BUFG %% t:* %D
+# Very crude method of checking that DSP48E1.PCOUT -> DSP48E1.PCIN
+# (i.e. Take all DSP48E1s, expand to find all wires connected
+#       to its PCOUT port, then remove all DSP48E1s from this
+#       selection, then expand again to find all cells where
+#       those wires are connected to the PCIN port, then remove
+#       all wires from this selection, and lastly intersect
+#       this selection with all DSP48E1 cells (to check that
+#       the connected cells are indeed DSPs)
+select -assert-count 2 t:DSP48E1 %co:+[PCOUT] t:DSP48E1 %d %co:+[PCIN] w:* %d t:DSP48E1 %i
+
+design -load read
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc6s
+design -load postopt
+cd cascade
+select -assert-count 3 t:DSP48A1
+select -assert-count 5 t:FDRE # No cascade for A input
+select -assert-none t:DSP48A1 t:BUFG t:FDRE %% t:* %D
+# Very crude method of checking that DSP48E1.PCOUT -> DSP48E1.PCIN
+#   (see above for explanation)
+select -assert-count 2 t:DSP48A1 %co:+[PCOUT] t:DSP48A1 %d %co:+[PCIN] w:* %d t:DSP48A1 %i
+
+design -reset
+read_verilog <<EOT
+module cascade(input clk, input [4:0] a, input [4:0] b, output reg [9:0] o);
+reg [4:0] ar1, ar2, ar3, br1, br2, br3;
+reg [9:0] m;
+always @(posedge clk) begin
+ar1 <= a;
+ar2 <= ar1;
+ar3 <= ar2;
+br1 <= b;
+br2 <= br1;
+br3 <= br2;
+m <= ar2 * br2;
+o <= ar3 * br3 + m;
+end
+endmodule
+EOT
+proc
+design -save read
+
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx
+design -load postopt
+cd cascade
+select -assert-count 2 t:DSP48E1
+select -assert-none t:DSP48E1 t:BUFG %% t:* %D
+# Very crude method of checking that DSP48E1.PCOUT -> DSP48E1.PCIN
+#   (see above for explanation)
+select -assert-count 1 t:DSP48E1 %co:+[PCOUT] t:DSP48E1 %d %co:+[PCIN] w:* %d t:DSP48E1 %i
+
+design -load read
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc6s
+design -load postopt
+cd cascade
+select -assert-count 2 t:DSP48A1
+select -assert-count 10 t:FDRE # Cannot cascade because first 'm' DSP
+                               # uses both B0REG and B1REG, whereas 'o'
+                               # only requires 1
+select -assert-none t:DSP48A1 t:BUFG t:FDRE %% t:* %D
+# Very crude method of checking that DSP48E1.PCOUT -> DSP48E1.PCIN
+#   (see above for explanation)
+select -assert-count 1 t:DSP48A1 %co:+[PCOUT] t:DSP48A1 %d %co:+[PCIN] w:* %d t:DSP48A1 %i
+
diff --git a/tests/arch/xilinx/macc.sh b/tests/arch/xilinx/macc.sh
index 154a29848..58b97b646 100644
--- a/tests/arch/xilinx/macc.sh
+++ b/tests/arch/xilinx/macc.sh
@@ -1,3 +1,6 @@
 ../../../yosys -qp "synth_xilinx -top macc2; rename -top macc2_uut" -o macc_uut.v macc.v
 iverilog -o test_macc macc_tb.v macc_uut.v macc.v ../../../techlibs/xilinx/cells_sim.v
 vvp -N ./test_macc
+../../../yosys -qp "synth_xilinx -family xc6s -top macc2; rename -top macc2_uut" -o macc_uut.v macc.v
+iverilog -o test_macc macc_tb.v macc_uut.v macc.v ../../../techlibs/xilinx/cells_sim.v
+vvp -N ./test_macc
diff --git a/tests/arch/xilinx/mul.ys b/tests/arch/xilinx/mul.ys
index b04833a43..049a3da7e 100644
--- a/tests/arch/xilinx/mul.ys
+++ b/tests/arch/xilinx/mul.ys
@@ -7,3 +7,15 @@ cd top # Constrain all select calls below inside the top module
 
 select -assert-count 1 t:DSP48E1
 select -assert-none t:DSP48E1 %% t:* %D
+
+design -reset
+
+read_verilog ../common/mul.v
+hierarchy -top top
+proc
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc6s # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd top # Constrain all select calls below inside the top module
+
+select -assert-count 1 t:DSP48A1
+select -assert-none t:DSP48A1 %% t:* %D
diff --git a/tests/arch/xilinx/mul_unsigned.ys b/tests/arch/xilinx/mul_unsigned.ys
index 0a7644b65..830dd639c 100644
--- a/tests/arch/xilinx/mul_unsigned.ys
+++ b/tests/arch/xilinx/mul_unsigned.ys
@@ -9,3 +9,17 @@ select -assert-count 1 t:BUFG
 select -assert-count 1 t:DSP48E1
 select -assert-count 30 t:FDRE
 select -assert-none t:DSP48E1 t:FDRE t:BUFG %% t:* %D
+
+design -reset
+
+read_verilog mul_unsigned.v
+hierarchy -top mul_unsigned
+proc
+
+equiv_opt -assert -map +/xilinx/cells_sim.v synth_xilinx -family xc6s # equivalency check
+design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
+cd mul_unsigned # Constrain all select calls below inside the top module
+select -assert-count 1 t:BUFG
+select -assert-count 1 t:DSP48A1
+select -assert-count 30 t:FDRE
+select -assert-none t:DSP48A1 t:FDRE t:BUFG %% t:* %D
diff --git a/tests/techmap/iopadmap.ys b/tests/techmap/iopadmap.ys
index f4345e906..c058d1607 100644
--- a/tests/techmap/iopadmap.ys
+++ b/tests/techmap/iopadmap.ys
@@ -28,6 +28,20 @@ assign io = oe ? i : 1'bz;
 assign o2 = io;
 assign o3 = ~io;
 endmodule
+
+module f(output o, o2);
+assign o = 1'bz;
+endmodule
+
+module g(inout io, output o);
+assign o = io;
+endmodule
+
+module h(inout io, output o, input i);
+assign io = i;
+assign o = io;
+endmodule
+
 EOT
 
 opt_clean
@@ -97,3 +111,12 @@ select -assert-count 1 @oeb %co %co @iob %i
 select -assert-count 1 @iob %co %co @o2b %i
 select -assert-count 1 @iob %co %co t:$_NOT_ %i
 select -assert-count 1 @o3b %ci %ci t:$_NOT_ %i
+
+select -assert-count 2 f/t:obuft
+
+select -assert-count 1 g/t:obuf
+select -assert-count 1 g/t:iobuf
+
+select -assert-count 1 h/t:ibuf
+select -assert-count 1 h/t:iobuf
+select -assert-count 1 h/t:obuf