diff options
Diffstat (limited to 'techlibs')
-rw-r--r-- | techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v | 28 | ||||
-rw-r--r-- | techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v | 14 | ||||
-rw-r--r-- | techlibs/altera_intel/lpm_functions.v | 66 | ||||
-rw-r--r-- | techlibs/altera_intel/max10/cells_arith_max10.v | 18 | ||||
-rw-r--r-- | techlibs/altera_intel/max10/cells_comb_max10.v | 32 | ||||
-rw-r--r-- | techlibs/altera_intel/max10/cells_map_max10.v | 14 | ||||
-rw-r--r-- | techlibs/altera_intel/synth_intel.cc | 2 | ||||
-rw-r--r-- | techlibs/greenpak4/greenpak4_counters.cc | 78 |
8 files changed, 126 insertions, 126 deletions
diff --git a/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v b/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v index c32984859..a65d0c991 100644 --- a/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v +++ b/techlibs/altera_intel/cycloneiv/cells_comb_cycloneiv.v @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ - + module VCC (output V); assign V = 1'b1; endmodule // VCC @@ -37,23 +37,23 @@ module cycloneiv_io_obuf (output o, input i, input oe); assign oe = oe; endmodule // fiftyfivenm_io_obuf -/* Altera MAX10 4-input non-fracturable LUT Primitive */ +/* Altera MAX10 4-input non-fracturable LUT Primitive */ module cycloneiv_lcell_comb (output combout, cout, input dataa, datab, datac, datad, cin); /* Internal parameters which define the behaviour of the LUT primitive. lut_mask define the lut function, can be expressed in 16-digit bin or hex. - sum_lutc_input define the type of LUT (combinational | arithmetic). + sum_lutc_input define the type of LUT (combinational | arithmetic). dont_touch for retiming || carry options. - lpm_type for WYSIWYG */ - + lpm_type for WYSIWYG */ + parameter lut_mask = 16'hFFFF; parameter dont_touch = "off"; parameter lpm_type = "cycloneiv_lcell_comb"; parameter sum_lutc_input = "datac"; - -reg [1:0] lut_type; + +reg [1:0] lut_type; reg cout_rt; reg combout_rt; wire dataa_w; @@ -84,7 +84,7 @@ endfunction initial begin if (sum_lutc_input == "datac") lut_type = 0; - else + else if (sum_lutc_input == "cin") lut_type = 1; else begin $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); @@ -94,11 +94,11 @@ end always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin if (lut_type == 0) begin // logic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, + combout_rt = lut_data(lut_mask, dataa_w, datab_w, datac_w, datad_w); end else if (lut_type == 1) begin // arithmetic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, + combout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, datad_w); end cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); @@ -111,17 +111,17 @@ endmodule // cycloneiv_lcell_comb /* Altera Cyclone IV Flip-Flop Primitive */ // TODO: Implement advanced simulation functions -module dffeas ( output q, - input d, clk, clrn, prn, ena, +module dffeas ( output q, + input d, clk, clrn, prn, ena, input asdata, aload, sclr, sload ); - + parameter power_up="dontcare"; parameter is_wysiwyg="false"; reg q; always @(posedge clk) q <= d; - + endmodule diff --git a/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v b/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v index 9860647ae..e02332712 100644 --- a/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v +++ b/techlibs/altera_intel/cycloneiv/cells_map_cycloneiv.v @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ - + // Flip-flop D module \$_DFF_P_ (input D, input C, output Q); parameter WYSIWYG="TRUE"; @@ -26,12 +26,12 @@ endmodule // // Input buffer map module \$__inpad (input I, output O); cycloneiv_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); -endmodule +endmodule -// Output buffer map +// Output buffer map module \$__outpad (input I, output O); cycloneiv_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); -endmodule +endmodule // LUT Map /* 0 -> datac @@ -41,14 +41,14 @@ module \$lut (A, Y); parameter LUT = 0; input [WIDTH-1:0] A; output Y; - generate + generate if (WIDTH == 1) begin assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function end else if (WIDTH == 2) begin cycloneiv_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1)); end else - if(WIDTH == 3) begin + if(WIDTH == 3) begin cycloneiv_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); end else if(WIDTH == 4) begin @@ -58,4 +58,4 @@ module \$lut (A, Y); endgenerate endmodule // - + diff --git a/techlibs/altera_intel/lpm_functions.v b/techlibs/altera_intel/lpm_functions.v index 20dbf4a02..b4d02dcb9 100644 --- a/techlibs/altera_intel/lpm_functions.v +++ b/techlibs/altera_intel/lpm_functions.v @@ -16,48 +16,48 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ - + // NOTE: This is still WIP. (* techmap_celltype = "$altpll" *) -module _80_altpll_altera ( input [1:0] inclk, - input fbin, - input pllena, - input clkswitch, - input areset, - input pfdena, - input clkena, - input extclkena, - input scanclk, - input scanaclr, - input scanclkena, - input scanread, - input scanwrite, - input scandata, - input phasecounterselect, +module _80_altpll_altera ( input [1:0] inclk, + input fbin, + input pllena, + input clkswitch, + input areset, + input pfdena, + input clkena, + input extclkena, + input scanclk, + input scanaclr, + input scanclkena, + input scanread, + input scanwrite, + input scandata, + input phasecounterselect, input phaseupdown, input phasestep, input configupdate, inout fbmimicbidir, - - output [width_clock-1:0] clk, - output [3:0] extclk, - output [1:0] clkbad, - output enable0, - output enable1, - output activeclock, - output clkloss, - output locked, - output scandataout, - output scandone, - output sclkout0, - output sclkout1, + + output [width_clock-1:0] clk, + output [3:0] extclk, + output [1:0] clkbad, + output enable0, + output enable1, + output activeclock, + output clkloss, + output locked, + output scandataout, + output scandone, + output sclkout0, + output sclkout1, output phasedone, output vcooverrange, output vcounderrange, output fbout, output fref, output icdrclk ); - + parameter intended_device_family = "MAX 10"; parameter operation_mode = "NORMAL"; parameter pll_type = "AUTO"; @@ -123,7 +123,7 @@ module _80_altpll_altera ( input [1:0] inclk, parameter clk2_phase_shift = "0"; parameter clk1_phase_shift = "0"; parameter clk0_phase_shift = "0"; - + parameter clk9_duty_cycle = 50; parameter clk8_duty_cycle = 50; parameter clk7_duty_cycle = 50; @@ -166,7 +166,7 @@ module _80_altpll_altera ( input [1:0] inclk, parameter pfd_min = 0; parameter pfd_max = 0; parameter m_initial = 1; - parameter m = 0; + parameter m = 0; parameter n = 1; parameter m2 = 1; parameter n2 = 1; @@ -316,4 +316,4 @@ module _80_altpll_altera ( input [1:0] inclk, parameter port_scanclkena = "PORT_CONNECTIVITY"; parameter using_fbmimicbidir_port = "ON"; -endmodule
\ No newline at end of file +endmodule diff --git a/techlibs/altera_intel/max10/cells_arith_max10.v b/techlibs/altera_intel/max10/cells_arith_max10.v index 497f44d99..82572fb5d 100644 --- a/techlibs/altera_intel/max10/cells_arith_max10.v +++ b/techlibs/altera_intel/max10/cells_arith_max10.v @@ -26,7 +26,7 @@ module _80_altera_max10_alu (A, B, CI, BI, X, Y, CO); parameter B_WIDTH = 1; parameter Y_WIDTH = 1; parameter LUT = 0; - + input [A_WIDTH-1:0] A; input [B_WIDTH-1:0] B; output [Y_WIDTH-1:0] X, Y; @@ -44,19 +44,19 @@ module _80_altera_max10_alu (A, B, CI, BI, X, Y, CO); wire [Y_WIDTH-1:0] AA = A_buf; wire [Y_WIDTH-1:0] BB = BI ? ~B_buf : B_buf; wire [Y_WIDTH-1:0] C = {CO, CI}; - + genvar i; generate for (i = 0; i < Y_WIDTH; i = i + 1) begin:slice - fiftyfivenm_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("cin")) _TECHMAP_REPLACE_ - ( .dataa(AA), - .datab(BB), - .datac(C), - .datad(1'b0), - .cin(C[i]), + fiftyfivenm_lcell_comb #(.lut_mask(LUT), .sum_lutc_input("cin")) _TECHMAP_REPLACE_ + ( .dataa(AA), + .datab(BB), + .datac(C), + .datad(1'b0), + .cin(C[i]), .cout(CO[i]), .combout(Y[i]) ); end: slice endgenerate assign X = C; endmodule - + diff --git a/techlibs/altera_intel/max10/cells_comb_max10.v b/techlibs/altera_intel/max10/cells_comb_max10.v index cbf0954aa..51adb72e2 100644 --- a/techlibs/altera_intel/max10/cells_comb_max10.v +++ b/techlibs/altera_intel/max10/cells_comb_max10.v @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ - + module VCC (output V); assign V = 1'b1; endmodule // VCC @@ -25,7 +25,7 @@ module GND (output G); assign G = 1'b0; endmodule // GND -/* Altera MAX10 devices Input Buffer Primitive */ +/* Altera MAX10 devices Input Buffer Primitive */ module fiftyfivenm_io_ibuf (output o, input i, input ibar); assign ibar = ibar; assign o = i; @@ -37,23 +37,23 @@ module fiftyfivenm_io_obuf (output o, input i, input oe); assign oe = oe; endmodule // fiftyfivenm_io_obuf -/* Altera MAX10 4-input non-fracturable LUT Primitive */ +/* Altera MAX10 4-input non-fracturable LUT Primitive */ module fiftyfivenm_lcell_comb (output combout, cout, input dataa, datab, datac, datad, cin); - + /* Internal parameters which define the behaviour of the LUT primitive. lut_mask define the lut function, can be expressed in 16-digit bin or hex. - sum_lutc_input define the type of LUT (combinational | arithmetic). + sum_lutc_input define the type of LUT (combinational | arithmetic). dont_touch for retiming || carry options. - lpm_type for WYSIWYG */ - + lpm_type for WYSIWYG */ + parameter lut_mask = 16'hFFFF; parameter dont_touch = "off"; parameter lpm_type = "fiftyfivenm_lcell_comb"; parameter sum_lutc_input = "datac"; - -reg [1:0] lut_type; + +reg [1:0] lut_type; reg cout_rt; reg combout_rt; wire dataa_w; @@ -84,7 +84,7 @@ endfunction initial begin if (sum_lutc_input == "datac") lut_type = 0; - else + else if (sum_lutc_input == "cin") lut_type = 1; else begin $error("Error in sum_lutc_input. Parameter %s is not a valid value.\n", sum_lutc_input); @@ -94,11 +94,11 @@ end always @(dataa_w or datab_w or datac_w or datad_w or cin_w) begin if (lut_type == 0) begin // logic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, + combout_rt = lut_data(lut_mask, dataa_w, datab_w, datac_w, datad_w); end else if (lut_type == 1) begin // arithmetic function - combout_rt = lut_data(lut_mask, dataa_w, datab_w, + combout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, datad_w); end cout_rt = lut_data(lut_mask, dataa_w, datab_w, cin_w, 'b0); @@ -111,17 +111,17 @@ endmodule // fiftyfivenm_lcell_comb /* Altera MAX10 D Flip-Flop Primitive */ // TODO: Implement advanced simulation functions -module dffeas ( output q, - input d, clk, clrn, prn, ena, +module dffeas ( output q, + input d, clk, clrn, prn, ena, input asdata, aload, sclr, sload ); - + parameter power_up="dontcare"; parameter is_wysiwyg="false"; reg q; always @(posedge clk) q <= d; - + endmodule diff --git a/techlibs/altera_intel/max10/cells_map_max10.v b/techlibs/altera_intel/max10/cells_map_max10.v index 9ae6871fa..ed63c521b 100644 --- a/techlibs/altera_intel/max10/cells_map_max10.v +++ b/techlibs/altera_intel/max10/cells_map_max10.v @@ -16,7 +16,7 @@ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * */ - + // Flip-flop D module \$_DFF_P_ (input D, input C, output Q); parameter WYSIWYG="TRUE"; @@ -26,12 +26,12 @@ endmodule // // Input buffer map module \$__inpad (input I, output O); fiftyfivenm_io_ibuf _TECHMAP_REPLACE_ (.o(O), .i(I), .ibar(1'b0)); -endmodule +endmodule -// Output buffer map +// Output buffer map module \$__outpad (input I, output O); fiftyfivenm_io_obuf _TECHMAP_REPLACE_ (.o(O), .i(I), .oe(1'b1)); -endmodule +endmodule // LUT Map /* 0 -> datac @@ -41,14 +41,14 @@ module \$lut (A, Y); parameter LUT = 0; input [WIDTH-1:0] A; output Y; - generate + generate if (WIDTH == 1) begin assign Y = ~A[0]; // Not need to spend 1 logic cell for such an easy function end else if (WIDTH == 2) begin fiftyfivenm_lcell_comb #(.lut_mask({4{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(1'b1),.datad(1'b1)); end else - if(WIDTH == 3) begin + if(WIDTH == 3) begin fiftyfivenm_lcell_comb #(.lut_mask({2{LUT}}), .sum_lutc_input("datac")) _TECHMAP_REPLACE_ (.combout(Y), .dataa(A[0]), .datab(A[1]), .datac(A[2]),.datad(1'b1)); end else if(WIDTH == 4) begin @@ -58,4 +58,4 @@ module \$lut (A, Y); endgenerate endmodule // - + diff --git a/techlibs/altera_intel/synth_intel.cc b/techlibs/altera_intel/synth_intel.cc index 9710f7a85..003059458 100644 --- a/techlibs/altera_intel/synth_intel.cc +++ b/techlibs/altera_intel/synth_intel.cc @@ -110,7 +110,7 @@ struct SynthIntelPass : public ScriptPass { if (!design->full_selection()) log_cmd_error("This comannd only operates on fully selected designs!\n"); - + if (family_opt != "max10" && family_opt !="cycloneiv" ) log_cmd_error("Invalid or not family specified: '%s'\n", family_opt.c_str()); diff --git a/techlibs/greenpak4/greenpak4_counters.cc b/techlibs/greenpak4/greenpak4_counters.cc index 998bb73bd..a606fd8af 100644 --- a/techlibs/greenpak4/greenpak4_counters.cc +++ b/techlibs/greenpak4/greenpak4_counters.cc @@ -66,11 +66,11 @@ bool is_full_bus( else if(!other_conns_allowed) return false; } - + if( (!found_a) || (!found_b) ) return false; } - + return true; } @@ -83,7 +83,7 @@ bool is_unconnected(const RTLIL::SigSpec& port, ModIndex& index) if(ports.size() > 1) return false; } - + return true; } @@ -105,18 +105,18 @@ struct CounterExtraction int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction& extract) { SigMap& sigmap = index.sigmap; - + //GreenPak does not support counters larger than 14 bits so immediately skip anything bigger int a_width = cell->getParam("\\A_WIDTH").as_int(); extract.width = a_width; if(a_width > 14) return 1; - + //Second input must be a single bit int b_width = cell->getParam("\\B_WIDTH").as_int(); if(b_width != 1) return 2; - + //Both inputs must be unsigned, so don't extract anything with a signed input bool a_sign = cell->getParam("\\A_SIGNED").as_bool(); bool b_sign = cell->getParam("\\B_SIGNED").as_bool(); @@ -128,7 +128,7 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction const RTLIL::SigSpec b_port = sigmap(cell->getPort("\\B")); if(!b_port.is_fully_const() || (b_port.as_int() != 1) ) return 4; - + //BI and CI must be constant 1 as well const RTLIL::SigSpec bi_port = sigmap(cell->getPort("\\BI")); if(!bi_port.is_fully_const() || (bi_port.as_int() != 1) ) @@ -136,13 +136,13 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction const RTLIL::SigSpec ci_port = sigmap(cell->getPort("\\CI")); if(!ci_port.is_fully_const() || (ci_port.as_int() != 1) ) return 6; - + //CO and X must be unconnected (exactly one connection to each port) if(!is_unconnected(sigmap(cell->getPort("\\CO")), index)) return 7; if(!is_unconnected(sigmap(cell->getPort("\\X")), index)) return 8; - + //Y must have exactly one connection, and it has to be a $mux cell. //We must have a direct bus connection from our Y to their A. const RTLIL::SigSpec aluy = sigmap(cell->getPort("\\Y")); @@ -161,26 +161,26 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction if(!underflow.is_fully_const()) return 12; extract.count_value = underflow.as_int(); - + //S connection of the mux must come from an inverter (need not be the only load) const RTLIL::SigSpec muxsel = sigmap(count_mux->getPort("\\S")); extract.outsig = muxsel; pool<Cell*> muxsel_conns = get_other_cells(muxsel, index, count_mux); Cell* underflow_inv = NULL; for(auto c : muxsel_conns) - { + { if(c->type != "$logic_not") continue; if(!is_full_bus(muxsel, index, c, "\\Y", count_mux, "\\S", true)) continue; - + underflow_inv = c; break; } if(underflow_inv == NULL) return 13; extract.underflow_inv = underflow_inv; - + //Y connection of the mux must have exactly one load, the counter's internal register const RTLIL::SigSpec muxy = sigmap(count_mux->getPort("\\Y")); pool<Cell*> muxy_loads = get_other_cells(muxy, index, count_mux); @@ -193,14 +193,14 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction else if(count_reg->type == "$adff") { extract.has_reset = true; - + //Verify ARST_VALUE is zero and ARST_POLARITY is 1 //TODO: infer an inverter to make it 1 if necessary, so we can support negative level resets? if(count_reg->getParam("\\ARST_POLARITY").as_int() != 1) return 22; if(count_reg->getParam("\\ARST_VALUE").as_int() != 0) return 23; - + //Save the reset extract.rst = sigmap(count_reg->getPort("\\ARST")); } @@ -209,9 +209,9 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction return 15; if(!is_full_bus(muxy, index, count_mux, "\\Y", count_reg, "\\D")) return 16; - + //TODO: Verify count_reg CLK_POLARITY is 1 - + //Register output must have exactly two loads, the inverter and ALU const RTLIL::SigSpec cnout = sigmap(count_reg->getPort("\\Q")); pool<Cell*> cnout_loads = get_other_cells(cnout, index, count_reg); @@ -221,10 +221,10 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction return 18; if(!is_full_bus(cnout, index, count_reg, "\\Q", cell, "\\A", true)) return 19; - + //Look up the clock from the register extract.clk = sigmap(count_reg->getPort("\\CLK")); - + //Register output net must have an INIT attribute equal to the count value extract.rwire = cnout.as_wire(); if(extract.rwire->attributes.find("\\init") == extract.rwire->attributes.end()) @@ -232,7 +232,7 @@ int greenpak4_counters_tryextract(ModIndex& index, Cell *cell, CounterExtraction int rinit = extract.rwire->attributes["\\init"].as_int(); if(rinit != extract.count_value) return 21; - + return 0; } @@ -243,11 +243,11 @@ void greenpak4_counters_worker( pool<Cell*>& cells_to_remove) { SigMap& sigmap = index.sigmap; - + //Core of the counter must be an ALU if (cell->type != "$alu") return; - + //A input is the count value. Check if it has COUNT_EXTRACT set. //If it's not a wire, don't even try auto port = sigmap(cell->getPort("\\A")); @@ -268,7 +268,7 @@ void greenpak4_counters_worker( log_id(a_wire), count_reg_src.c_str(), extract_value.c_str()); - + if(extract_value == "FORCE") force_extract = true; else if(extract_value == "NO") @@ -280,15 +280,15 @@ void greenpak4_counters_worker( extract_value.c_str()); } } - + //If we're explicitly told not to extract, don't infer a counter if(never_extract) return; - + //Attempt to extract a counter CounterExtraction extract; int reason = greenpak4_counters_tryextract(index, cell, extract); - + //Nonzero code - we could not find a matchable counter. //Do nothing, unless extraction was forced in which case give an error if(reason != 0) @@ -320,7 +320,7 @@ void greenpak4_counters_worker( "Reset polarity is not positive", //22 "Reset is not to zero" //23 }; - + if(force_extract) { log_error( @@ -330,12 +330,12 @@ void greenpak4_counters_worker( } return; } - + //Figure out the final cell type based on the counter size string celltype = "\\GP_COUNT8"; if(extract.width > 8) celltype = "\\GP_COUNT14"; - + //Log it total_counters ++; string reset_type = "non-resettable"; @@ -350,7 +350,7 @@ void greenpak4_counters_worker( extract.count_value, log_id(extract.rwire->name), count_reg_src.c_str()); - + //Wipe all of the old connections to the ALU cell->unsetPort("\\A"); cell->unsetPort("\\B"); @@ -367,7 +367,7 @@ void greenpak4_counters_worker( //Change the cell type cell->type = celltype; - + //Hook up resets if(extract.has_reset) { @@ -380,14 +380,14 @@ void greenpak4_counters_worker( cell->setParam("\\RESET_MODE", RTLIL::Const("RISING")); cell->setPort("\\RST", RTLIL::SigSpec(false)); } - + //Hook up other stuff cell->setParam("\\CLKIN_DIVIDE", RTLIL::Const(1)); cell->setParam("\\COUNT_TO", RTLIL::Const(extract.count_value)); - + cell->setPort("\\CLK", extract.clk); cell->setPort("\\OUT", extract.outsig); - + //Delete the cells we've replaced (let opt_clean handle deleting the now-redundant wires) cells_to_remove.insert(extract.count_mux); cells_to_remove.insert(extract.count_reg); @@ -409,7 +409,7 @@ struct Greenpak4CountersPass : public Pass { virtual void execute(std::vector<std::string> args, RTLIL::Design *design) { log_header(design, "Executing GREENPAK4_COUNTERS pass (mapping counters to hard IP blocks).\n"); - + size_t argidx; for (argidx = 1; argidx < args.size(); argidx++) { @@ -419,21 +419,21 @@ struct Greenpak4CountersPass : public Pass { break; } extra_args(args, argidx, design); - + //Extract all of the counters we could find unsigned int total_counters = 0; for (auto module : design->selected_modules()) { pool<Cell*> cells_to_remove; - + ModIndex index(module); for (auto cell : module->selected_cells()) greenpak4_counters_worker(index, cell, total_counters, cells_to_remove); - + for(auto cell : cells_to_remove) module->remove(cell); } - + if(total_counters) log("Extracted %u counters\n", total_counters); } |