Fix typographical and grammatical errors and inconsistencies.

The initial list of hits was generated with the codespell command
below, and each hit was evaluated and fixed manually while taking
context into consideration.

    DIRS="kernel/ frontends/ backends/ passes/ techlibs/"
    DIRS="${DIRS} libs/ezsat/ libs/subcircuit"
    codespell $DIRS -S *.o -L upto,iff,thru,synopsys,uint

More hits were found by looking through comments and strings manually.

15 files changed, 22 insertions, 22 deletions

diff --git a/techlibs/achronix/speedster22i/cells_map.v b/techlibs/achronix/speedster22i/cells_map.v
index 95f5d59c5..9f647cbef 100755
--- a/techlibs/achronix/speedster22i/cells_map.v
+++ b/techlibs/achronix/speedster22i/cells_map.v
@@ -32,7 +32,7 @@ endmodule
 // > end buffers <
 
 // > Look-Up table <
-// > VT: I still think Achronix folks would have choosen a better \
+// > VT: I still think Achronix folks would have chosen a better \
 // >     logic architecture.
 // LUT Map
 module \$lut (A, Y);
@@ -43,30 +43,30 @@ module \$lut (A, Y);
    generate
       if (WIDTH == 1) begin
 	   // VT: This is not consistent and ACE will complain: assign Y = ~A[0];
-         LUT4 #(.lut_function({4{LUT}})) _TECHMAP_REPLACE_ 
+         LUT4 #(.lut_function({4{LUT}})) _TECHMAP_REPLACE_
            (.dout(Y), .din0(A[0]), .din1(1'b0), .din2(1'b0), .din3(1'b0));
       end else
       if (WIDTH == 2) begin
-              LUT4 #(.lut_function({4{LUT}})) _TECHMAP_REPLACE_ 
+              LUT4 #(.lut_function({4{LUT}})) _TECHMAP_REPLACE_
                 (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(1'b0), .din3(1'b0));
       end else
       if(WIDTH == 3) begin
-	      LUT4 #(.lut_function({2{LUT}})) _TECHMAP_REPLACE_ 
+	      LUT4 #(.lut_function({2{LUT}})) _TECHMAP_REPLACE_
                 (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(A[2]), .din3(1'b0));
       end else
       if(WIDTH == 4) begin
-             LUT4 #(.lut_function(LUT)) _TECHMAP_REPLACE_ 
+             LUT4 #(.lut_function(LUT)) _TECHMAP_REPLACE_
                (.dout(Y), .din0(A[0]), .din1(A[1]), .din2(A[2]), .din3(A[3]));
       end else
 	   wire _TECHMAP_FAIL_ = 1;
    endgenerate
-endmodule 
+endmodule
 // > end LUT <
 
 // > Flops <
 // DFF flop
 module  \$_DFF_P_ (input D, C, output Q);
-   DFF _TECHMAP_REPLACE_ 
+   DFF _TECHMAP_REPLACE_
      (.q(Q), .d(D), .ck(C));
-endmodule 
+endmodule
 
diff --git a/techlibs/achronix/synth_achronix.cc b/techlibs/achronix/synth_achronix.cc
index 92b10781d..3642e3bd3 100755
--- a/techlibs/achronix/synth_achronix.cc
+++ b/techlibs/achronix/synth_achronix.cc
@@ -108,7 +108,7 @@ struct SynthAchronixPass : public ScriptPass {
     extra_args(args, argidx, design);
 
     if (!design->full_selection())
-      log_cmd_error("This comannd only operates on fully selected designs!\n");
+      log_cmd_error("This command only operates on fully selected designs!\n");
 
     log_header(design, "Executing SYNTH_ACHRONIX pass.\n");
     log_push();
diff --git a/techlibs/anlogic/synth_anlogic.cc b/techlibs/anlogic/synth_anlogic.cc
index 9c44599ea..68f4399d4 100644
--- a/techlibs/anlogic/synth_anlogic.cc
+++ b/techlibs/anlogic/synth_anlogic.cc
@@ -119,7 +119,7 @@ struct SynthAnlogicPass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_ANLOGIC pass.\n");
 		log_push();
diff --git a/techlibs/common/prep.cc b/techlibs/common/prep.cc
index 897f37dbb..86fb4d6c6 100644
--- a/techlibs/common/prep.cc
+++ b/techlibs/common/prep.cc
@@ -153,7 +153,7 @@ struct PrepPass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing PREP pass.\n");
 		log_push();
diff --git a/techlibs/common/synth.cc b/techlibs/common/synth.cc
index efb214759..d9565131e 100644
--- a/techlibs/common/synth.cc
+++ b/techlibs/common/synth.cc
@@ -155,7 +155,7 @@ struct SynthPass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH pass.\n");
 		log_push();
diff --git a/techlibs/coolrunner2/synth_coolrunner2.cc b/techlibs/coolrunner2/synth_coolrunner2.cc
index a5dac3566..810380d4a 100644
--- a/techlibs/coolrunner2/synth_coolrunner2.cc
+++ b/techlibs/coolrunner2/synth_coolrunner2.cc
@@ -111,7 +111,7 @@ struct SynthCoolrunner2Pass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_COOLRUNNER2 pass.\n");
 		log_push();
diff --git a/techlibs/easic/synth_easic.cc b/techlibs/easic/synth_easic.cc
index b5ed93be4..dd9e3dab7 100644
--- a/techlibs/easic/synth_easic.cc
+++ b/techlibs/easic/synth_easic.cc
@@ -117,7 +117,7 @@ struct SynthEasicPass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_EASIC pass.\n");
 		log_push();
diff --git a/techlibs/ecp5/cells_bb.v b/techlibs/ecp5/cells_bb.v
index 057f9d737..425d62d24 100644
--- a/techlibs/ecp5/cells_bb.v
+++ b/techlibs/ecp5/cells_bb.v
@@ -484,7 +484,7 @@ module DCUA(
 	parameter D_XGE_MODE = "0b0";
 
 // These parameters don't do anything but are
-// needed for compatability with Diamond
+// needed for compatibility with Diamond
 	parameter D_TX_MAX_RATE = "2.5";
 	parameter D_RX_MAX_RATE = "2.5";
 	parameter CH0_TXAMPLITUDE = "0d1300";
diff --git a/techlibs/ecp5/synth_ecp5.cc b/techlibs/ecp5/synth_ecp5.cc
index 825e131c4..2e9176a84 100644
--- a/techlibs/ecp5/synth_ecp5.cc
+++ b/techlibs/ecp5/synth_ecp5.cc
@@ -189,7 +189,7 @@ struct SynthEcp5Pass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_ECP5 pass.\n");
 		log_push();
diff --git a/techlibs/gowin/synth_gowin.cc b/techlibs/gowin/synth_gowin.cc
index e3d924e26..9700b3898 100644
--- a/techlibs/gowin/synth_gowin.cc
+++ b/techlibs/gowin/synth_gowin.cc
@@ -109,7 +109,7 @@ struct SynthGowinPass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_GOWIN pass.\n");
 		log_push();
diff --git a/techlibs/greenpak4/synth_greenpak4.cc b/techlibs/greenpak4/synth_greenpak4.cc
index b91d5273a..eeb001b46 100644
--- a/techlibs/greenpak4/synth_greenpak4.cc
+++ b/techlibs/greenpak4/synth_greenpak4.cc
@@ -120,7 +120,7 @@ struct SynthGreenPAK4Pass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		if (part != "SLG46140V" && part != "SLG46620V" && part != "SLG46621V")
 			log_cmd_error("Invalid part name: '%s'\n", part.c_str());
diff --git a/techlibs/ice40/synth_ice40.cc b/techlibs/ice40/synth_ice40.cc
index c2aed873b..626f6d381 100644
--- a/techlibs/ice40/synth_ice40.cc
+++ b/techlibs/ice40/synth_ice40.cc
@@ -198,7 +198,7 @@ struct SynthIce40Pass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_ICE40 pass.\n");
 		log_push();
diff --git a/techlibs/intel/cyclonev/cells_sim.v b/techlibs/intel/cyclonev/cells_sim.v
index 5ecdabcfc..fa27c2c8e 100644
--- a/techlibs/intel/cyclonev/cells_sim.v
+++ b/techlibs/intel/cyclonev/cells_sim.v
@@ -54,7 +54,7 @@ module cyclonev_lcell_comb
    // Internal variables
    // Sub mask for fragmented LUTs
    wire [15:0] mask_a, mask_b, mask_c, mask_d;
-   // Independant output for fragmented LUTs
+   // Independent output for fragmented LUTs
    wire        output_0, output_1, output_2, output_3;
    // Extended mode uses mux to define the output
    wire        mux_0, mux_1;
diff --git a/techlibs/sf2/synth_sf2.cc b/techlibs/sf2/synth_sf2.cc
index 2676ea657..62b3cd0e2 100644
--- a/techlibs/sf2/synth_sf2.cc
+++ b/techlibs/sf2/synth_sf2.cc
@@ -118,7 +118,7 @@ struct SynthSf2Pass : public ScriptPass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		log_header(design, "Executing SYNTH_SF2 pass.\n");
 		log_push();
diff --git a/techlibs/xilinx/synth_xilinx.cc b/techlibs/xilinx/synth_xilinx.cc
index b27c08529..6c11d885d 100644
--- a/techlibs/xilinx/synth_xilinx.cc
+++ b/techlibs/xilinx/synth_xilinx.cc
@@ -178,7 +178,7 @@ struct SynthXilinxPass : public Pass
 		extra_args(args, argidx, design);
 
 		if (!design->full_selection())
-			log_cmd_error("This comannd only operates on fully selected designs!\n");
+			log_cmd_error("This command only operates on fully selected designs!\n");
 
 		bool active = run_from.empty();