syncing

1 files changed, 241 insertions, 0 deletions

diff --git a/fpga/ebaz4205/doc/DOC/Boot.log b/fpga/ebaz4205/doc/DOC/Boot.log
new file mode 100644
index 0000000..b07f4ad
--- /dev/null
+++ b/fpga/ebaz4205/doc/DOC/Boot.log
@@ -0,0 +1,241 @@
+

+

+1.0.0.46 (Nov 28 2017 - 20:56:04 +0800)

+

+Model: Zynq Zed Development Board

+DRAM:  ECC disabled 256 MiB

+NAND:  128 MiB

+MMC:   zynq_sdhci: 0

+Invalid bus 0 (err=-1)

+*** Warning - spi_flash_probe() failed, using default environment

+

+In:    serial

+Out:   serial

+Err:   serial

+Model: Zynq Zed Development Board

+Net:   Gem.e000b000

+Hit 'd' to stop autoboot(eric):  3  2  1  0 

+Copying Linux from NAND flash to RAM...

+

+Device 0: nand0, sector size 128 KiB

+  Page size       2048 b

+  OOB size          64 b

+  Erase size    131072 b

+  subpagesize      512 b

+  options     0x       0

+  bbt options 0x   20000

+

+NAND read: device 0 offset 0x2220000, size 0x300000

+ 3145728 bytes read: OK

+  design filename = "top_ctrl;UserID=0XFFFFFFFF;Version=2016.4"

+  part number = "7z010clg400"

+  date = "2017/11/28"

+  time = "13:25:29"

+  bytes in bitstream = 2083740

+zynq_align_dma_buffer: Align buffer at 100068 to 100000(swap 1)

+

+NAND read: device 0 offset 0x300000, size 0x500000

+ 5242880 bytes read: OK

+

+NAND read: device 0 offset 0x800000, size 0x20000

+ 131072 bytes read: OK

+## Booting kernel from Legacy Image at 02080000 ...

+   Image Name:   Linux-4.6.0-xilinx

+   Image Type:   ARM Linux Kernel Image (uncompressed)

+   Data Size:    3820688 Bytes = 3.6 MiB

+   Load Address: 00008000

+   Entry Point:  00008000

+   Verifying Checksum ... OK

+## Flattened Device Tree blob at 02000000

+   Booting using the fdt blob at 0x2000000

+   Loading Kernel Image ... OK

+   Loading Device Tree to 0f2fe000, end 0f303b90 ... OK

+

+Starting kernel ...

+

+Booting Linux on physical CPU 0x0

+Linux version 4.6.0-xilinx (root@alvin) (gcc version 5.2.0 (GCC) ) #5 SMP PREEMPT Mon May 8 14:36:49 CST 2017

+CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d

+CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

+Machine model: xlnx,zynq-7000

+cma: Reserved 16 MiB at 0x0e000000

+Memory policy: Data cache writealloc

+percpu: Embedded 12 pages/cpu @cfdce000 s19776 r8192 d21184 u49152

+Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 65024

+Kernel command line: console=ttyPS0,115200 root=/dev/mtdblock6 rootfstype=jffs2 noinitrd rw rootwait

+PID hash table entries: 1024 (order: 0, 4096 bytes)

+Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

+Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

+Memory: 234624K/262144K available (5286K kernel code, 231K rwdata, 1848K rodata, 1024K init, 226K bss, 11136K reserved, 16384K cma-reserved, 0K highmem)

+Virtual kernel memory layout:

+    vector  : 0xffff0000 - 0xffff1000   (   4 kB)

+    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)

+    vmalloc : 0xd0800000 - 0xff800000   ( 752 MB)

+    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)

+    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

+    modules : 0xbf000000 - 0xbfe00000   (  14 MB)

+      .text : 0xc0008000 - 0xc07f7850   (8127 kB)

+      .init : 0xc0800000 - 0xc0900000   (1024 kB)

+      .data : 0xc0900000 - 0xc0939e60   ( 232 kB)

+       .bss : 0xc0939e60 - 0xc0972764   ( 227 kB)

+Preemptible hierarchical RCU implementation.

+	Build-time adjustment of leaf fanout to 32.

+	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.

+RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2

+NR_IRQS:16 nr_irqs:16 16

+efuse mapped to d0800000

+slcr mapped to d0802000

+L2C: platform modifies aux control register: 0x72360000 -> 0x72760000

+L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000

+L2C-310 erratum 769419 enabled

+L2C-310 enabling early BRESP for Cortex-A9

+L2C-310 full line of zeros enabled for Cortex-A9

+L2C-310 ID prefetch enabled, offset 1 lines

+L2C-310 dynamic clock gating enabled, standby mode enabled

+L2C-310 cache controller enabled, 8 ways, 512 kB

+L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001

+zynq_clock_init: clkc starts at d0802100

+Zynq clock init

+sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns

+clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce076117e, max_idle_ns: 440795215954 ns

+Switching to timer-based delay loop, resolution 3ns

+clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns

+timer #0 at d080a000, irq=17

+Console: colour dummy device 80x30

+Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333330)

+pid_max: default: 32768 minimum: 301

+Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)

+Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)

+CPU: Testing write buffer coherency: ok

+CPU0: thread -1, cpu 0, socket 0, mpidr 80000000

+Setting up static identity map for 0x100000 - 0x100058

+CPU1: thread -1, cpu 1, socket 0, mpidr 80000001

+Brought up 2 CPUs

+SMP: Total of 2 processors activated (1333.33 BogoMIPS).

+CPU: All CPU(s) started in SVC mode.

+devtmpfs: initialized

+VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

+clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns

+pinctrl core: initialized pinctrl subsystem

+NET: Registered protocol family 16

+DMA: preallocated 256 KiB pool for atomic coherent allocations

+cpuidle: using governor menu

+hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.

+hw-breakpoint: maximum watchpoint size is 4 bytes.

+zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xd0880000

+zynq-pinctrl 700.pinctrl: zynq pinctrl initialized

+vgaarb: loaded

+SCSI subsystem initialized

+usbcore: registered new interface driver usbfs

+usbcore: registered new interface driver hub

+usbcore: registered new device driver usb

+media: Linux media interface: v0.10

+Linux video capture interface: v2.00

+pps_core: LinuxPPS API ver. 1 registered

+pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>

+PTP clock support registered

+EDAC MC: Ver: 3.0.0

+Advanced Linux Sound Architecture Driver Initialized.

+clocksource: Switched to clocksource arm_global_timer

+NET: Registered protocol family 2

+TCP established hash table entries: 2048 (order: 1, 8192 bytes)

+TCP bind hash table entries: 2048 (order: 2, 16384 bytes)

+TCP: Hash tables configured (established 2048 bind 2048)

+UDP hash table entries: 256 (order: 1, 8192 bytes)

+UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)

+NET: Registered protocol family 1

+RPC: Registered named UNIX socket transport module.

+RPC: Registered udp transport module.

+RPC: Registered tcp transport module.

+RPC: Registered tcp NFSv4.1 backchannel transport module.

+hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available

+futex hash table entries: 512 (order: 3, 32768 bytes)

+workingset: timestamp_bits=28 max_order=16 bucket_order=0

+jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

+io scheduler noop registered

+io scheduler deadline registered

+io scheduler cfq registered (default)

+dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330

+dma-pl330 f8003000.dmac: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16

+42c00000.serial: ttyUL2 at MMIO 0x42c00000 (irq = 166, base_baud = 0) is a uartlite

+e0000000.serial: ttyPS1 at MMIO 0xe0000000 (irq = 144, base_baud = 3124996) is a xuartps

+e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 145, base_baud = 3124996) is a xuartps

+console [ttyPS0] enabled

+xdevcfg f8007000.devcfg: ioremap 0xf8007000 to d0872000

+[drm] Initialized drm 1.1.0 20060810

+brd: module loaded

+loop: module loaded

+CAN device driver interface

+gpiod_set_value: invalid GPIO

+libphy: MACB_mii_bus: probed

+macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 148 (00:0a:35:00:01:22)

+ICPlus IP101A/G e000b000.etherne:00: attached PHY driver [ICPlus IP101A/G] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)

+e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k

+e1000e: Copyright(c) 1999 - 2015 Intel Corporation.

+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

+ehci-pci: EHCI PCI platform driver

+usbcore: registered new interface driver usb-storage

+mousedev: PS/2 mouse device common for all mice

+i2c /dev entries driver

+rtc-pcf8563 0-0051: chip found, driver version 0.4.4

+rtc-pcf8563 0-0051: pcf8563_write_block_data: err=-11 addr=0e, data=03

+rtc-pcf8563 0-0051: pcf8563_probe: write error

+rtc-pcf8563: probe of 0-0051 failed with error -5

+cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 141

+EDAC MC: ECC not enabled

+Xilinx Zynq CpuIdle Driver started

+sdhci: Secure Digital Host Controller Interface driver

+sdhci: Copyright(c) Pierre Ossman

+sdhci-pltfm: SDHCI platform and OF driver helper

+mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using DMA

+ledtrig-cpu: registered to indicate activity on CPUs

+usbcore: registered new interface driver usbhid

+usbhid: USB HID core driver

+nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1

+nand: Unknown W29N01HV

+nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64

+Bad block table found at page 65472, version 0x01

+Bad block table found at page 65408, version 0x01

+nand_read_bbt: bad block at 0x000007f60000

+nand_read_bbt: bad block at 0x000007f80000

+nand_read_bbt: bad block at 0x000007fa0000

+nand_read_bbt: bad block at 0x000007fc0000

+9 ofpart partitions found on MTD device pl35x-nand

+Creating 9 MTD partitions on "pl35x-nand":

+0x000000000000-0x000000300000 : "nand-fsbl-uboot"

+0x000000300000-0x000000800000 : "nand-linux"

+0x000000800000-0x000000820000 : "nand-device-tree"

+0x000000820000-0x000001220000 : "nand-rootfs"

+0x000001220000-0x000002220000 : "nand-jffs2"

+0x000002220000-0x000002a20000 : "nand-bitstream"

+0x000002a20000-0x000006a20000 : "nand-allrootfs"

+0x000006a20000-0x000007e00000 : "nand-release"

+0x000007e00000-0x000008000000 : "nand-reserve"

+NET: Registered protocol family 10

+sit: IPv6 over IPv4 tunneling driver

+NET: Registered protocol family 17

+can: controller area network core (rev 20120528 abi 9)

+NET: Registered protocol family 29

+can: raw protocol (rev 20120528)

+can: broadcast manager protocol (rev 20120528 t)

+can: netlink gateway (rev 20130117) max_hops=1

+Registering SWP/SWPB emulation handler

+hctosys: unable to open rtc device (rtc0)

+ALSA device list:

+  No soundcards found.

+VFS: Mounted root (jffs2 filesystem) on device 31:6.

+devtmpfs: mounted

+Freeing unused kernel memory: 1024K (c0800000 - c0900000)

+
INIT: version 2.88 booting


+random: dd urandom read with 2 bits of entropy available

+Wed Jul 21 01:12:44 UTC 2010


+Starting internet superserver: inetd.


+
INIT: Entering runlevel: 5



+Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

+done.


+Starting Dropbear SSH server: dropbear.


+Starting syslogd/klogd: done


+


+PetaLinux 2016.4 zedboard-zynq7 /dev/ttyPS0

+


+
zedboard-zynq7 login: jffs2: notice: (721) check_node_data: wrong data CRC in data node at 0x0011bc60: read 0x7d8de99e, calculated 0x7a2b1e83.