From 8123e5531868f8db9787c81792286143a0f2868a Mon Sep 17 00:00:00 2001 From: James McKenzie Date: Sun, 5 Oct 2025 17:17:44 +0100 Subject: syncing --- fpga/ebaz4205/doc/DOC/Boot.log | 241 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 241 insertions(+) create mode 100644 fpga/ebaz4205/doc/DOC/Boot.log (limited to 'fpga/ebaz4205/doc/DOC/Boot.log') diff --git a/fpga/ebaz4205/doc/DOC/Boot.log b/fpga/ebaz4205/doc/DOC/Boot.log new file mode 100644 index 0000000..b07f4ad --- /dev/null +++ b/fpga/ebaz4205/doc/DOC/Boot.log @@ -0,0 +1,241 @@ + + +1.0.0.46 (Nov 28 2017 - 20:56:04 +0800) + +Model: Zynq Zed Development Board +DRAM: ECC disabled 256 MiB +NAND: 128 MiB +MMC: zynq_sdhci: 0 +Invalid bus 0 (err=-1) +*** Warning - spi_flash_probe() failed, using default environment + +In: serial +Out: serial +Err: serial +Model: Zynq Zed Development Board +Net: Gem.e000b000 +Hit 'd' to stop autoboot(eric): 3  2  1  0 +Copying Linux from NAND flash to RAM... + +Device 0: nand0, sector size 128 KiB + Page size 2048 b + OOB size 64 b + Erase size 131072 b + subpagesize 512 b + options 0x 0 + bbt options 0x 20000 + +NAND read: device 0 offset 0x2220000, size 0x300000 + 3145728 bytes read: OK + design filename = "top_ctrl;UserID=0XFFFFFFFF;Version=2016.4" + part number = "7z010clg400" + date = "2017/11/28" + time = "13:25:29" + bytes in bitstream = 2083740 +zynq_align_dma_buffer: Align buffer at 100068 to 100000(swap 1) + +NAND read: device 0 offset 0x300000, size 0x500000 + 5242880 bytes read: OK + +NAND read: device 0 offset 0x800000, size 0x20000 + 131072 bytes read: OK +## Booting kernel from Legacy Image at 02080000 ... + Image Name: Linux-4.6.0-xilinx + Image Type: ARM Linux Kernel Image (uncompressed) + Data Size: 3820688 Bytes = 3.6 MiB + Load Address: 00008000 + Entry Point: 00008000 + Verifying Checksum ... OK +## Flattened Device Tree blob at 02000000 + Booting using the fdt blob at 0x2000000 + Loading Kernel Image ... OK + Loading Device Tree to 0f2fe000, end 0f303b90 ... OK + +Starting kernel ... + +Booting Linux on physical CPU 0x0 +Linux version 4.6.0-xilinx (root@alvin) (gcc version 5.2.0 (GCC) ) #5 SMP PREEMPT Mon May 8 14:36:49 CST 2017 +CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d +CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache +Machine model: xlnx,zynq-7000 +cma: Reserved 16 MiB at 0x0e000000 +Memory policy: Data cache writealloc +percpu: Embedded 12 pages/cpu @cfdce000 s19776 r8192 d21184 u49152 +Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024 +Kernel command line: console=ttyPS0,115200 root=/dev/mtdblock6 rootfstype=jffs2 noinitrd rw rootwait +PID hash table entries: 1024 (order: 0, 4096 bytes) +Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) +Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) +Memory: 234624K/262144K available (5286K kernel code, 231K rwdata, 1848K rodata, 1024K init, 226K bss, 11136K reserved, 16384K cma-reserved, 0K highmem) +Virtual kernel memory layout: + vector : 0xffff0000 - 0xffff1000 ( 4 kB) + fixmap : 0xffc00000 - 0xfff00000 (3072 kB) + vmalloc : 0xd0800000 - 0xff800000 ( 752 MB) + lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) + pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) + modules : 0xbf000000 - 0xbfe00000 ( 14 MB) + .text : 0xc0008000 - 0xc07f7850 (8127 kB) + .init : 0xc0800000 - 0xc0900000 (1024 kB) + .data : 0xc0900000 - 0xc0939e60 ( 232 kB) + .bss : 0xc0939e60 - 0xc0972764 ( 227 kB) +Preemptible hierarchical RCU implementation. + Build-time adjustment of leaf fanout to 32. + RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. +RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 +NR_IRQS:16 nr_irqs:16 16 +efuse mapped to d0800000 +slcr mapped to d0802000 +L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 +L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 +L2C-310 erratum 769419 enabled +L2C-310 enabling early BRESP for Cortex-A9 +L2C-310 full line of zeros enabled for Cortex-A9 +L2C-310 ID prefetch enabled, offset 1 lines +L2C-310 dynamic clock gating enabled, standby mode enabled +L2C-310 cache controller enabled, 8 ways, 512 kB +L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 +zynq_clock_init: clkc starts at d0802100 +Zynq clock init +sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns +clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce076117e, max_idle_ns: 440795215954 ns +Switching to timer-based delay loop, resolution 3ns +clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns +timer #0 at d080a000, irq=17 +Console: colour dummy device 80x30 +Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333330) +pid_max: default: 32768 minimum: 301 +Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) +Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) +CPU: Testing write buffer coherency: ok +CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 +Setting up static identity map for 0x100000 - 0x100058 +CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 +Brought up 2 CPUs +SMP: Total of 2 processors activated (1333.33 BogoMIPS). +CPU: All CPU(s) started in SVC mode. +devtmpfs: initialized +VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 +clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns +pinctrl core: initialized pinctrl subsystem +NET: Registered protocol family 16 +DMA: preallocated 256 KiB pool for atomic coherent allocations +cpuidle: using governor menu +hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. +hw-breakpoint: maximum watchpoint size is 4 bytes. +zynq-ocm f800c000.ocmc: ZYNQ OCM pool: 256 KiB @ 0xd0880000 +zynq-pinctrl 700.pinctrl: zynq pinctrl initialized +vgaarb: loaded +SCSI subsystem initialized +usbcore: registered new interface driver usbfs +usbcore: registered new interface driver hub +usbcore: registered new device driver usb +media: Linux media interface: v0.10 +Linux video capture interface: v2.00 +pps_core: LinuxPPS API ver. 1 registered +pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti +PTP clock support registered +EDAC MC: Ver: 3.0.0 +Advanced Linux Sound Architecture Driver Initialized. +clocksource: Switched to clocksource arm_global_timer +NET: Registered protocol family 2 +TCP established hash table entries: 2048 (order: 1, 8192 bytes) +TCP bind hash table entries: 2048 (order: 2, 16384 bytes) +TCP: Hash tables configured (established 2048 bind 2048) +UDP hash table entries: 256 (order: 1, 8192 bytes) +UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) +NET: Registered protocol family 1 +RPC: Registered named UNIX socket transport module. +RPC: Registered udp transport module. +RPC: Registered tcp transport module. +RPC: Registered tcp NFSv4.1 backchannel transport module. +hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available +futex hash table entries: 512 (order: 3, 32768 bytes) +workingset: timestamp_bits=28 max_order=16 bucket_order=0 +jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. +io scheduler noop registered +io scheduler deadline registered +io scheduler cfq registered (default) +dma-pl330 f8003000.dmac: Loaded driver for PL330 DMAC-241330 +dma-pl330 f8003000.dmac: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 +42c00000.serial: ttyUL2 at MMIO 0x42c00000 (irq = 166, base_baud = 0) is a uartlite +e0000000.serial: ttyPS1 at MMIO 0xe0000000 (irq = 144, base_baud = 3124996) is a xuartps +e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 145, base_baud = 3124996) is a xuartps +console [ttyPS0] enabled +xdevcfg f8007000.devcfg: ioremap 0xf8007000 to d0872000 +[drm] Initialized drm 1.1.0 20060810 +brd: module loaded +loop: module loaded +CAN device driver interface +gpiod_set_value: invalid GPIO +libphy: MACB_mii_bus: probed +macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 148 (00:0a:35:00:01:22) +ICPlus IP101A/G e000b000.etherne:00: attached PHY driver [ICPlus IP101A/G] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) +e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k +e1000e: Copyright(c) 1999 - 2015 Intel Corporation. +ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver +ehci-pci: EHCI PCI platform driver +usbcore: registered new interface driver usb-storage +mousedev: PS/2 mouse device common for all mice +i2c /dev entries driver +rtc-pcf8563 0-0051: chip found, driver version 0.4.4 +rtc-pcf8563 0-0051: pcf8563_write_block_data: err=-11 addr=0e, data=03 +rtc-pcf8563 0-0051: pcf8563_probe: write error +rtc-pcf8563: probe of 0-0051 failed with error -5 +cdns-i2c e0004000.i2c: 400 kHz mmio e0004000 irq 141 +EDAC MC: ECC not enabled +Xilinx Zynq CpuIdle Driver started +sdhci: Secure Digital Host Controller Interface driver +sdhci: Copyright(c) Pierre Ossman +sdhci-pltfm: SDHCI platform and OF driver helper +mmc0: SDHCI controller on e0100000.sdhci [e0100000.sdhci] using DMA +ledtrig-cpu: registered to indicate activity on CPUs +usbcore: registered new interface driver usbhid +usbhid: USB HID core driver +nand: device found, Manufacturer ID: 0xef, Chip ID: 0xf1 +nand: Unknown W29N01HV +nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 +Bad block table found at page 65472, version 0x01 +Bad block table found at page 65408, version 0x01 +nand_read_bbt: bad block at 0x000007f60000 +nand_read_bbt: bad block at 0x000007f80000 +nand_read_bbt: bad block at 0x000007fa0000 +nand_read_bbt: bad block at 0x000007fc0000 +9 ofpart partitions found on MTD device pl35x-nand +Creating 9 MTD partitions on "pl35x-nand": +0x000000000000-0x000000300000 : "nand-fsbl-uboot" +0x000000300000-0x000000800000 : "nand-linux" +0x000000800000-0x000000820000 : "nand-device-tree" +0x000000820000-0x000001220000 : "nand-rootfs" +0x000001220000-0x000002220000 : "nand-jffs2" +0x000002220000-0x000002a20000 : "nand-bitstream" +0x000002a20000-0x000006a20000 : "nand-allrootfs" +0x000006a20000-0x000007e00000 : "nand-release" +0x000007e00000-0x000008000000 : "nand-reserve" +NET: Registered protocol family 10 +sit: IPv6 over IPv4 tunneling driver +NET: Registered protocol family 17 +can: controller area network core (rev 20120528 abi 9) +NET: Registered protocol family 29 +can: raw protocol (rev 20120528) +can: broadcast manager protocol (rev 20120528 t) +can: netlink gateway (rev 20130117) max_hops=1 +Registering SWP/SWPB emulation handler +hctosys: unable to open rtc device (rtc0) +ALSA device list: + No soundcards found. +VFS: Mounted root (jffs2 filesystem) on device 31:6. +devtmpfs: mounted +Freeing unused kernel memory: 1024K (c0800000 - c0900000) + INIT: version 2.88 booting +random: dd urandom read with 2 bits of entropy available +Wed Jul 21 01:12:44 UTC 2010 +Starting internet superserver: inetd. + INIT: Entering runlevel: 5 +Configuring network interfaces... IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready +done. +Starting Dropbear SSH server: dropbear. +Starting syslogd/klogd: done + +PetaLinux 2016.4 zedboard-zynq7 /dev/ttyPS0 + + zedboard-zynq7 login: jffs2: notice: (721) check_node_data: wrong data CRC in data node at 0x0011bc60: read 0x7d8de99e, calculated 0x7a2b1e83. -- cgit v1.2.3