diff options
Diffstat (limited to 'boards/base/STM32F469i-Discovery/CubeHAL')
| -rw-r--r-- | boards/base/STM32F469i-Discovery/CubeHAL/board_STM32LTDC.h | 8 | ||||
| -rw-r--r-- | boards/base/STM32F469i-Discovery/CubeHAL/gmouse_lld_FT6x06_board.h | 16 |
2 files changed, 12 insertions, 12 deletions
diff --git a/boards/base/STM32F469i-Discovery/CubeHAL/board_STM32LTDC.h b/boards/base/STM32F469i-Discovery/CubeHAL/board_STM32LTDC.h index 59555bba..1571966b 100644 --- a/boards/base/STM32F469i-Discovery/CubeHAL/board_STM32LTDC.h +++ b/boards/base/STM32F469i-Discovery/CubeHAL/board_STM32LTDC.h @@ -118,7 +118,7 @@ static GFXINLINE void init_board(GDisplay *g) { dsiHandle.Instance = DSI; // There is only one DSI interface dsiHandle.Init.AutomaticClockLaneControl = DSI_AUTO_CLK_LANE_CTRL_ENABLE; // Automatic clock lane control: powers down the clock lane when not in use /* Highest speed = 500MHz. */ - uint16_t laneByteClk_kHz = 62500; /* 500 MHz / 8 = 62.5 MHz = 62500 kHz */ + gU16 laneByteClk_kHz = 62500; /* 500 MHz / 8 = 62.5 MHz = 62500 kHz */ /* TXEscapeCkdiv = f(LaneByteClk)/15.62 = 4 -> 500MHz/4 = 25MHz datasheet says around 20MHz */ dsiHandle.Init.TXEscapeCkdiv = laneByteClk_kHz/15620; // Low power clock relative to the laneByteClock dsiHandle.Init.NumberOfLanes = DSI_TWO_DATA_LANES; // Two data lines for the fastest transfer speed @@ -201,7 +201,7 @@ static GFXINLINE void init_board(GDisplay *g) { BSP_SDRAM_Init(); } -static GFXINLINE void set_backlight(GDisplay* g, uint8_t percent) +static GFXINLINE void set_backlight(GDisplay* g, gU8 percent) { (void)g; (void)percent; @@ -287,7 +287,7 @@ static GFXINLINE void post_init_board(GDisplay* g) * @param pParams: Pointer to parameter values table. * @retval HAL status */ -void DSI_IO_WriteCmd(uint32_t NbrParams, uint8_t *pParams) +void DSI_IO_WriteCmd(gU32 NbrParams, gU8 *pParams) { if(NbrParams <= 1) { @@ -304,7 +304,7 @@ void DSI_IO_WriteCmd(uint32_t NbrParams, uint8_t *pParams) * * @param Delay: The requested delay in ms. */ -void OTM8009A_IO_Delay(uint32_t Delay) +void OTM8009A_IO_Delay(gU32 Delay) { gfxSleepMilliseconds(Delay); } diff --git a/boards/base/STM32F469i-Discovery/CubeHAL/gmouse_lld_FT6x06_board.h b/boards/base/STM32F469i-Discovery/CubeHAL/gmouse_lld_FT6x06_board.h index c51514a5..d185f3ad 100644 --- a/boards/base/STM32F469i-Discovery/CubeHAL/gmouse_lld_FT6x06_board.h +++ b/boards/base/STM32F469i-Discovery/CubeHAL/gmouse_lld_FT6x06_board.h @@ -82,26 +82,26 @@ static GFXINLINE void release_bus(GMouse* m) { (void)m;
}
-static void write_reg(GMouse* m, uint8_t reg, uint8_t val) {
+static void write_reg(GMouse* m, gU8 reg, gU8 val) {
(void)m;
- HAL_I2C_Mem_Write(&i2cHandle, FT6x06_SLAVE_ADDR, (uint16_t)reg, I2C_MEMADD_SIZE_8BIT, &val, 1, 1000);
+ HAL_I2C_Mem_Write(&i2cHandle, FT6x06_SLAVE_ADDR, (gU16)reg, I2C_MEMADD_SIZE_8BIT, &val, 1, 1000);
}
-static uint8_t read_byte(GMouse* m, uint8_t reg) {
+static gU8 read_byte(GMouse* m, gU8 reg) {
(void)m;
- uint8_t result;
+ gU8 result;
- HAL_I2C_Mem_Read(&i2cHandle, FT6x06_SLAVE_ADDR, (uint16_t)reg, I2C_MEMADD_SIZE_8BIT, &result, 1, 1000);
+ HAL_I2C_Mem_Read(&i2cHandle, FT6x06_SLAVE_ADDR, (gU16)reg, I2C_MEMADD_SIZE_8BIT, &result, 1, 1000);
return result;
}
-static uint16_t read_word(GMouse* m, uint8_t reg) {
+static gU16 read_word(GMouse* m, gU8 reg) {
(void)m;
- uint8_t result[2];
+ gU8 result[2];
- HAL_I2C_Mem_Read(&i2cHandle, FT6x06_SLAVE_ADDR, (uint16_t)reg, I2C_MEMADD_SIZE_8BIT, result, 2, 1000);
+ HAL_I2C_Mem_Read(&i2cHandle, FT6x06_SLAVE_ADDR, (gU16)reg, I2C_MEMADD_SIZE_8BIT, result, 2, 1000);
return (result[0]<<8 | result[1]);
|