diff options
Diffstat (limited to 'Demos/Host/Incomplete')
8 files changed, 0 insertions, 2016 deletions
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.c b/Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.c deleted file mode 100644 index ad3976a19..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.c +++ /dev/null @@ -1,245 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * USB Device Configuration Descriptor processing routines, to determine the correct pipe configurations
- * needed to communication with an attached USB device. Descriptors are special computer-readable structures
- * which the host requests upon device enumeration, to determine the device's capabilities and functions.
- */
-
-#include "ConfigDescriptor.h"
-
-/** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This
- * routine will read in the entire configuration descriptor, and configure the hosts pipes to correctly communicate
- * with compatible devices.
- *
- * This routine searches for a CDC interface descriptor containing bulk data IN and OUT endpoints, and an interrupt event endpoint.
- *
- * \return An error code from the \ref CDCHost_GetConfigDescriptorDataCodes_t enum.
- */
-uint8_t ProcessConfigurationDescriptor(void)
-{
- uint8_t ConfigDescriptorData[512];
- void* CurrConfigLocation = ConfigDescriptorData;
- uint16_t CurrConfigBytesRem;
- uint8_t FoundEndpoints = 0;
-
- /* Retrieve the entire configuration descriptor into the allocated buffer */
- switch (USB_Host_GetDeviceConfigDescriptor(1, &CurrConfigBytesRem, ConfigDescriptorData, sizeof(ConfigDescriptorData)))
- {
- case HOST_GETCONFIG_Successful:
- break;
- case HOST_GETCONFIG_InvalidData:
- return InvalidConfigDataReturned;
- case HOST_GETCONFIG_BuffOverflow:
- return DescriptorTooLarge;
- default:
- return ControlError;
- }
-
- /* Get the CDC control interface from the configuration descriptor */
- if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- DComp_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- /* Descriptor not found, error out */
- return NoRNDISInterfaceFound;
- }
-
- /* Get the IN and OUT data and IN notification endpoints for the RNDIS interface */
- while (FoundEndpoints != ((1 << RNDIS_NOTIFICATIONPIPE) | (1 << RNDIS_DATAPIPE_IN) | (1 << RNDIS_DATAPIPE_OUT)))
- {
- /* Fetch the next bulk or interrupt endpoint from the current RNDIS interface */
- if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- DComp_NextCDCDataInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- /* Check to see if the control interface's notification pipe has been found, if so search for the data interface */
- if (FoundEndpoints & (1 << RNDIS_NOTIFICATIONPIPE))
- {
- /* Get the next CDC data interface from the configuration descriptor (RNDIS class has two CDC interfaces) */
- if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- DComp_NextCDCDataInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- /* Descriptor not found, error out */
- return NoRNDISInterfaceFound;
- }
- }
- else
- {
- /* Clear the found endpoints mask, since any already processed endpoints aren't in the CDC interface we need */
- FoundEndpoints = 0;
-
- /* Disable any already configured pipes from the invalid RNDIS interfaces */
- Pipe_SelectPipe(RNDIS_NOTIFICATIONPIPE);
- Pipe_DisablePipe();
- Pipe_SelectPipe(RNDIS_DATAPIPE_IN);
- Pipe_DisablePipe();
- Pipe_SelectPipe(RNDIS_DATAPIPE_OUT);
- Pipe_DisablePipe();
-
- /* Get the next CDC control interface from the configuration descriptor (CDC class has two CDC interfaces) */
- if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- DComp_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- /* Descriptor not found, error out */
- return NoRNDISInterfaceFound;
- }
- }
-
- /* Fetch the next bulk or interrupt endpoint from the current CDC interface */
- if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation,
- DComp_NextCDCDataInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- /* Descriptor not found, error out */
- return NoEndpointFound;
- }
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t);
-
- /* Check if the found endpoint is a interrupt or bulk type descriptor */
- if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
- {
- /* If the endpoint is a IN type interrupt endpoint */
- if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
- {
- /* Configure the notification pipe */
- Pipe_ConfigurePipe(RNDIS_NOTIFICATIONPIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN,
- EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
-
- Pipe_SetInterruptPeriod(EndpointData->PollingIntervalMS);
-
- /* Set the flag indicating that the notification pipe has been found */
- FoundEndpoints |= (1 << RNDIS_NOTIFICATIONPIPE);
- }
- }
- else
- {
- /* Check if the endpoint is a bulk IN or bulk OUT endpoint */
- if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN)
- {
- /* Configure the data IN pipe */
- Pipe_ConfigurePipe(RNDIS_DATAPIPE_IN, EP_TYPE_BULK, PIPE_TOKEN_IN,
- EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
-
- /* Set the flag indicating that the data IN pipe has been found */
- FoundEndpoints |= (1 << RNDIS_DATAPIPE_IN);
- }
- else
- {
- /* Configure the data OUT pipe */
- Pipe_ConfigurePipe(RNDIS_DATAPIPE_OUT, EP_TYPE_BULK, PIPE_TOKEN_OUT,
- EndpointData->EndpointAddress, EndpointData->EndpointSize, PIPE_BANK_SINGLE);
-
- /* Set the flag indicating that the data OUT pipe has been found */
- FoundEndpoints |= (1 << RNDIS_DATAPIPE_OUT);
- }
- }
- }
-
- /* Valid data found, return success */
- return SuccessfulConfigRead;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- * descriptor processing if an incompatible descriptor configuration is found.
- *
- * This comparator searches for the next Interface descriptor of the correct CDC control Class, Subclass and Protocol values.
- *
- * \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor)
-{
- if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
- {
- /* Check the CDC descriptor class, subclass and protocol, break out if correct control interface found */
- if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == CDC_CONTROL_CLASS) &&
- (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == CDC_CONTROL_SUBCLASS) &&
- (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == CDC_CONTROL_PROTOCOL))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- * descriptor processing if an incompatible descriptor configuration is found.
- *
- * This comparator searches for the next Interface descriptor of the correct CDC data Class, Subclass and Protocol values.
- *
- * \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor)
-{
- if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
- {
- /* Check the CDC descriptor class, subclass and protocol, break out if correct data interface found */
- if ((DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Class == CDC_DATA_CLASS) &&
- (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).SubClass == CDC_DATA_SUBCLASS) &&
- (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Interface_t).Protocol == CDC_DATA_PROTOCOL))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-/** Descriptor comparator function. This comparator function is can be called while processing an attached USB device's
- * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration
- * descriptor processing if an incompatible descriptor configuration is found.
- *
- * This comparator searches for the next bulk IN or OUT endpoint, or interrupt IN endpoint within the current interface,
- * aborting the search if another interface descriptor is found before the required endpoint (so that it may be compared
- * using a different comparator to determine if it is another CDC class interface).
- *
- * \return A value from the DSEARCH_Return_ErrorCodes_t enum
- */
-uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor)
-{
- if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)
- {
- uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor,
- USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK);
-
- if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT))
- return DESCRIPTOR_SEARCH_Found;
- }
- else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.h b/Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.h deleted file mode 100644 index 4279c1a13..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/ConfigDescriptor.h +++ /dev/null @@ -1,85 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for ConfigDescriptor.c.
- */
-
-#ifndef _CONFIGDESCRIPTOR_H_
-#define _CONFIGDESCRIPTOR_H_
-
- /* Includes: */
- #include <LUFA/Drivers/USB/USB.h> // USB Functionality
-
- #include "RNDISEthernetHost.h"
-
- /* Macros: */
- /** Interface Class value for the CDC class */
- #define CDC_CONTROL_CLASS 0x02
-
- /** Interface Class value for the CDC Communication Interface subclass */
- #define CDC_CONTROL_SUBCLASS 0x02
-
- /** Interface Class value for the CDC RNDIS vendor specific protocol */
- #define CDC_CONTROL_PROTOCOL 0xFF
-
- /** Interface Class value for the CDC data class */
- #define CDC_DATA_CLASS 0x0A
-
- /** Interface Class value for the CDC data subclass */
- #define CDC_DATA_SUBCLASS 0x00
-
- /** Interface Class value for the CDC data protocol */
- #define CDC_DATA_PROTOCOL 0x00
-
- /** Maximum size of a device configuration descriptor which can be processed by the host, in bytes */
- #define MAX_CONFIG_DESCRIPTOR_SIZE 512
-
- /* Enums: */
- /** Enum for the possible return codes of the ProcessConfigurationDescriptor() function. */
- enum RNDISHost_GetConfigDescriptorDataCodes_t
- {
- SuccessfulConfigRead = 0, /**< Configuration Descriptor was processed successfully */
- ControlError = 1, /**< A control request to the device failed to complete successfully */
- DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
- InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
- NoRNDISInterfaceFound = 4, /**< A compatible RNDIS interface was not found in the device's Configuration Descriptor */
- NoEndpointFound = 5, /**< Compatible RNDIS endpoints were not found in the device's RNDIS interface */
- };
-
- /* Function Prototypes: */
- uint8_t ProcessConfigurationDescriptor(void);
-
- uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor);
- uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor);
- uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor);
-
-#endif
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.c b/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.c deleted file mode 100644 index b1966142a..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.c +++ /dev/null @@ -1,234 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * RNDOS Device commands, to issue RNDIS commands to the device for
- * the control and data transfer between the host and RNDIS device.
- */
-
-#include "RNDISCommands.h"
-
-uint32_t RequestID = 0;
-
-uint8_t RNDIS_SendEncapsulatedCommand(void* Buffer, uint16_t Length)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = REQ_SendEncapsulatedCommand,
- .wValue = 0,
- .wIndex = 0,
- .wLength = Length,
- };
-
- /* Select the control pipe for the request transfer */
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
-}
-
-uint8_t RNDIS_GetEncapsulatedResponse(void* Buffer, uint16_t Length)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = REQ_GetEncapsulatedResponse,
- .wValue = 0,
- .wIndex = 0,
- .wLength = Length,
- };
-
- /* Select the control pipe for the request transfer */
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
-}
-
-uint8_t RNDIS_SendKeepAlive(void)
-{
- uint8_t ErrorCode;
-
- RNDIS_KeepAlive_Message_t KeepAliveMessage;
- RNDIS_KeepAlive_Complete_t KeepAliveMessageResponse;
-
- KeepAliveMessage.MessageType = REMOTE_NDIS_KEEPALIVE_MSG;
- KeepAliveMessage.MessageLength = sizeof(RNDIS_KeepAlive_Message_t);
- KeepAliveMessage.RequestId = RequestID++;
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&KeepAliveMessage,
- sizeof(RNDIS_KeepAlive_Message_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&KeepAliveMessageResponse,
- sizeof(RNDIS_KeepAlive_Complete_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_InitializeDevice(uint16_t HostMaxPacketSize, uint16_t* DeviceMaxPacketSize)
-{
- uint8_t ErrorCode;
-
- RNDIS_Initialize_Message_t InitMessage;
- RNDIS_Initialize_Complete_t InitMessageResponse;
-
- InitMessage.MessageType = REMOTE_NDIS_INITIALIZE_MSG;
- InitMessage.MessageLength = sizeof(RNDIS_Initialize_Message_t);
- InitMessage.RequestId = RequestID++;
-
- InitMessage.MajorVersion = REMOTE_NDIS_VERSION_MAJOR;
- InitMessage.MinorVersion = REMOTE_NDIS_VERSION_MINOR;
- InitMessage.MaxTransferSize = HostMaxPacketSize;
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&InitMessage,
- sizeof(RNDIS_Initialize_Message_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&InitMessageResponse,
- sizeof(RNDIS_Initialize_Complete_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if (InitMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS)
- return RNDIS_COMMAND_FAILED;
-
- *DeviceMaxPacketSize = InitMessageResponse.MaxTransferSize;
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_SetRNDISProperty(uint32_t Oid, void* Buffer, uint16_t Length)
-{
- uint8_t ErrorCode;
-
- struct
- {
- RNDIS_Set_Message_t SetMessage;
- uint8_t ContigiousBuffer[Length];
- } SetMessageData;
-
- RNDIS_Set_Complete_t SetMessageResponse;
-
- SetMessageData.SetMessage.MessageType = REMOTE_NDIS_SET_MSG;
- SetMessageData.SetMessage.MessageLength = sizeof(RNDIS_Set_Message_t) + Length;
- SetMessageData.SetMessage.RequestId = RequestID++;
-
- SetMessageData.SetMessage.Oid = Oid;
- SetMessageData.SetMessage.InformationBufferLength = Length;
- SetMessageData.SetMessage.InformationBufferOffset = (sizeof(RNDIS_Set_Message_t) - sizeof(RNDIS_Message_Header_t));
- SetMessageData.SetMessage.DeviceVcHandle = 0;
-
- memcpy(&SetMessageData.ContigiousBuffer, Buffer, Length);
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&SetMessageData,
- SetMessageData.SetMessage.MessageLength)) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&SetMessageResponse,
- sizeof(RNDIS_Set_Complete_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if (SetMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS)
- return RNDIS_COMMAND_FAILED;
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_QueryRNDISProperty(uint32_t Oid, void* Buffer, uint16_t MaxLength)
-{
- uint8_t ErrorCode;
-
- RNDIS_Query_Message_t QueryMessage;
-
- struct
- {
- RNDIS_Query_Complete_t QueryMessageResponse;
- uint8_t ContigiousBuffer[MaxLength];
- } QueryMessageResponseData;
-
- QueryMessage.MessageType = REMOTE_NDIS_QUERY_MSG;
- QueryMessage.MessageLength = sizeof(RNDIS_Query_Message_t);
- QueryMessage.RequestId = RequestID++;
-
- QueryMessage.Oid = Oid;
- QueryMessage.InformationBufferLength = 0;
- QueryMessage.InformationBufferOffset = 0;
- QueryMessage.DeviceVcHandle = 0;
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&QueryMessage,
- sizeof(RNDIS_Query_Message_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&QueryMessageResponseData,
- sizeof(QueryMessageResponseData))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if (QueryMessageResponseData.QueryMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS)
- return RNDIS_COMMAND_FAILED;
-
- memcpy(Buffer, &QueryMessageResponseData.ContigiousBuffer, MaxLength);
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_GetPacketLength(uint16_t* PacketLength)
-{
- uint8_t ErrorCode;
-
- RNDIS_Packet_Message_t DeviceMessage;
-
- if ((ErrorCode = Pipe_Read_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t))) != PIPE_RWSTREAM_NoError)
- {
- return ErrorCode;
- }
-
- *PacketLength = (uint16_t)DeviceMessage.DataLength;
-
- Pipe_Discard_Stream(DeviceMessage.DataOffset - (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t)));
-
- return PIPE_RWSTREAM_NoError;
-}
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.h b/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.h deleted file mode 100644 index 429b4c535..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISCommands.h +++ /dev/null @@ -1,212 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for RNDISCommands.c.
- */
-
-#ifndef _RNDIS_COMMANDS_H_
-#define _RNDIS_COMMANDS_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <stdio.h>
- #include <string.h>
-
- #include <LUFA/Drivers/USB/USB.h>
-
- #include "RNDISConstants.h"
-
- /* Type Defines: */
- /** Type define for a RNDIS message header, sent before RNDIS messages */
- typedef struct
- {
- uint32_t MessageType; /**< RNDIS message type, a REMOTE_NDIS_*_MSG constant */
- uint32_t MessageLength; /**< Total length of the RNDIS message, in bytes */
- } RNDIS_Message_Header_t;
-
- /** Type define for a RNDIS packet message, used to encapsulate Ethernet packets sent to and from the adapter */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t DataOffset;
- uint32_t DataLength;
- uint32_t OOBDataOffset;
- uint32_t OOBDataLength;
- uint32_t NumOOBDataElements;
- uint32_t PerPacketInfoOffset;
- uint32_t PerPacketInfoLength;
- uint32_t VcHandle;
- uint32_t Reserved;
- } RNDIS_Packet_Message_t;
-
- /** Type define for a RNDIS Initialize command message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
-
- uint32_t MajorVersion;
- uint32_t MinorVersion;
- uint32_t MaxTransferSize;
- } RNDIS_Initialize_Message_t;
-
- /** Type define for a RNDIS Initialize complete response message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
-
- uint32_t MajorVersion;
- uint32_t MinorVersion;
- uint32_t DeviceFlags;
- uint32_t Medium;
- uint32_t MaxPacketsPerTransfer;
- uint32_t MaxTransferSize;
- uint32_t PacketAlignmentFactor;
- uint32_t AFListOffset;
- uint32_t AFListSize;
- } RNDIS_Initialize_Complete_t;
-
- /** Type define for a RNDIS Keepalive command message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- } RNDIS_KeepAlive_Message_t;
-
- /** Type define for a RNDIS Keepalive complete message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
- } RNDIS_KeepAlive_Complete_t;
-
- /** Type define for a RNDIS Reset complete message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t Status;
-
- uint32_t AddressingReset;
- } RNDIS_Reset_Complete_t;
-
- /** Type define for a RNDIS Set command message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
-
- uint32_t Oid;
- uint32_t InformationBufferLength;
- uint32_t InformationBufferOffset;
- uint32_t DeviceVcHandle;
- } RNDIS_Set_Message_t;
-
- /** Type define for a RNDIS Set complete response message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
- } RNDIS_Set_Complete_t;
-
- /** Type define for a RNDIS Query command message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
-
- uint32_t Oid;
- uint32_t InformationBufferLength;
- uint32_t InformationBufferOffset;
- uint32_t DeviceVcHandle;
- } RNDIS_Query_Message_t;
-
- /** Type define for a RNDIS Query complete response message */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
-
- uint32_t InformationBufferLength;
- uint32_t InformationBufferOffset;
- } RNDIS_Query_Complete_t;
-
- /* Macros: */
- /** RNDIS request to issue a host-to-device NDIS command */
- #define REQ_SendEncapsulatedCommand 0x00
-
- /** RNDIS request to issue a device-to-host NDIS response */
- #define REQ_GetEncapsulatedResponse 0x01
-
- /** Implemented RNDIS Version Major */
- #define REMOTE_NDIS_VERSION_MAJOR 0x01
-
- /** Implemented RNDIS Version Minor */
- #define REMOTE_NDIS_VERSION_MINOR 0x00
-
- /** Pipe number for the RNDIS data IN pipe */
- #define RNDIS_DATAPIPE_IN 1
-
- /** Pipe number for the RNDIS data OUT pipe */
- #define RNDIS_DATAPIPE_OUT 2
-
- /** Pipe number for the RNDIS notification pipe */
- #define RNDIS_NOTIFICATIONPIPE 3
-
- /** Additional error code for RNDIS functions when a device returns a logical command failure */
- #define RNDIS_COMMAND_FAILED 0xC0
-
- /* Function Prototypes: */
- uint8_t RNDIS_SendEncapsulatedCommand(void* Buffer, uint16_t Length);
- uint8_t RNDIS_GetEncapsulatedResponse(void* Buffer, uint16_t Length);
-
- uint8_t RNDIS_SendKeepAlive(void);
- uint8_t RNDIS_InitializeDevice(uint16_t HostMaxPacketSize, uint16_t* DeviceMaxPacketSize);
- uint8_t RNDIS_SetRNDISProperty(uint32_t Oid, void* Buffer, uint16_t Length);
- uint8_t RNDIS_QueryRNDISProperty(uint32_t Oid, void* Buffer, uint16_t MaxLength);
- uint8_t RNDIS_GetPacketLength(uint16_t* PacketLength);
-
-#endif
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISConstants.h b/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISConstants.h deleted file mode 100644 index f65a66cbf..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/Lib/RNDISConstants.h +++ /dev/null @@ -1,112 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * RNDIS specification related constants. For more information on these
- * constants, please refer to the Microsoft RNDIS specification.
- */
-
-#ifndef _RNDIS_CONSTANTS_H_
-#define _RNDIS_CONSTANTS_H_
-
- /* Macros: */
- #define REMOTE_NDIS_PACKET_MSG 0x00000001UL
- #define REMOTE_NDIS_INITIALIZE_MSG 0x00000002UL
- #define REMOTE_NDIS_HALT_MSG 0x00000003UL
- #define REMOTE_NDIS_QUERY_MSG 0x00000004UL
- #define REMOTE_NDIS_SET_MSG 0x00000005UL
- #define REMOTE_NDIS_RESET_MSG 0x00000006UL
- #define REMOTE_NDIS_INDICATE_STATUS_MSG 0x00000007UL
- #define REMOTE_NDIS_KEEPALIVE_MSG 0x00000008UL
-
- #define REMOTE_NDIS_INITIALIZE_CMPLT 0x80000002UL
- #define REMOTE_NDIS_QUERY_CMPLT 0x80000004UL
- #define REMOTE_NDIS_SET_CMPLT 0x80000005UL
- #define REMOTE_NDIS_RESET_CMPLT 0x80000006UL
- #define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008UL
-
- #define REMOTE_NDIS_STATUS_SUCCESS 0x00000000UL
- #define REMOTE_NDIS_STATUS_FAILURE 0xC0000001UL
- #define REMOTE_NDIS_STATUS_INVALID_DATA 0xC0010015UL
- #define REMOTE_NDIS_STATUS_NOT_SUPPORTED 0xC00000BBUL
- #define REMOTE_NDIS_STATUS_MEDIA_CONNECT 0x4001000BUL
- #define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT 0x4001000CUL
-
- #define REMOTE_NDIS_MEDIA_STATE_CONNECTED 0x00000000UL
- #define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED 0x00000001UL
-
- #define REMOTE_NDIS_MEDIUM_802_3 0x00000000UL
-
- #define REMOTE_NDIS_DF_CONNECTIONLESS 0x00000001UL
- #define REMOTE_NDIS_DF_CONNECTION_ORIENTED 0x00000002UL
-
- #define OID_GEN_SUPPORTED_LIST 0x00010101UL
- #define OID_GEN_HARDWARE_STATUS 0x00010102UL
- #define OID_GEN_MEDIA_SUPPORTED 0x00010103UL
- #define OID_GEN_MEDIA_IN_USE 0x00010104UL
- #define OID_GEN_MAXIMUM_FRAME_SIZE 0x00010106UL
- #define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111UL
- #define OID_GEN_LINK_SPEED 0x00010107UL
- #define OID_GEN_TRANSMIT_BLOCK_SIZE 0x0001010AUL
- #define OID_GEN_RECEIVE_BLOCK_SIZE 0x0001010BUL
- #define OID_GEN_VENDOR_ID 0x0001010CUL
- #define OID_GEN_VENDOR_DESCRIPTION 0x0001010DUL
- #define OID_GEN_CURRENT_PACKET_FILTER 0x0001010EUL
- #define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111UL
- #define OID_GEN_MEDIA_CONNECT_STATUS 0x00010114UL
- #define OID_GEN_PHYSICAL_MEDIUM 0x00010202UL
- #define OID_GEN_XMIT_OK 0x00020101UL
- #define OID_GEN_RCV_OK 0x00020102UL
- #define OID_GEN_XMIT_ERROR 0x00020103UL
- #define OID_GEN_RCV_ERROR 0x00020104UL
- #define OID_GEN_RCV_NO_BUFFER 0x00020105UL
- #define OID_802_3_PERMANENT_ADDRESS 0x01010101UL
- #define OID_802_3_CURRENT_ADDRESS 0x01010102UL
- #define OID_802_3_MULTICAST_LIST 0x01010103UL
- #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104UL
- #define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101UL
- #define OID_802_3_XMIT_ONE_COLLISION 0x01020102UL
- #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103UL
-
- #define RNDIS_PACKET_TYPE_DIRECTED 0x00000001UL
- #define RNDIS_PACKET_TYPE_MULTICAST 0x00000002UL
- #define RNDIS_PACKET_TYPE_ALL_MULTICAST 0x00000004UL
- #define RNDIS_PACKET_TYPE_BROADCAST 0x00000008UL
- #define RNDIS_PACKET_TYPE_SOURCE_ROUTING 0x00000010UL
- #define RNDIS_PACKET_TYPE_PROMISCUOUS 0x00000020UL
- #define RNDIS_PACKET_TYPE_SMT 0x00000040UL
- #define RNDIS_PACKET_TYPE_ALL_LOCAL 0x00000080UL
- #define RNDIS_PACKET_TYPE_GROUP 0x00001000UL
- #define RNDIS_PACKET_TYPE_ALL_FUNCTIONAL 0x00002000UL
- #define RNDIS_PACKET_TYPE_FUNCTIONAL 0x00004000UL
- #define RNDIS_PACKET_TYPE_MAC_FRAME 0x00008000UL
-
-#endif
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c deleted file mode 100644 index 237d94dfe..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c +++ /dev/null @@ -1,295 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
- * the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "RNDISEthernetHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
- SetupHardware();
-
- puts_P(PSTR(ESC_FG_CYAN "RNDIS Host Demo running.\r\n" ESC_FG_WHITE));
-
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
- for (;;)
- {
- RNDIS_Host_Task();
- USB_USBTask();
- }
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- SerialStream_Init(9600, false);
- LEDs_Init();
- USB_Init();
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- * starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- * stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- * enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
- USB_ShutDown();
-
- printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
- " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- * enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
-{
- printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
- " -- Error Code %d\r\n"
- " -- Sub Error Code %d\r\n"
- " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-void PrintIncommingPackets(void)
-{
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(RNDIS_DATAPIPE_IN);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_Freeze();
- return;
- }
-
- LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
- puts_P(PSTR("DATA IN\r\n"));
-
- uint16_t PacketLength;
- if ((ErrorCode = RNDIS_GetPacketLength(&PacketLength)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Packet Reception Error.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
- return;
- }
-
- printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength);
-
- if (PacketLength > 1024)
- {
- puts_P(PSTR(ESC_FG_RED "Packet too large.\r\n" ESC_FG_WHITE));
- Pipe_Discard_Stream(PacketLength);
- }
- else
- {
- uint8_t PacketBuffer[PacketLength];
-
- Pipe_Read_Stream_LE(&PacketBuffer, PacketLength);
-
- for (uint16_t i = 0; i < PacketLength; i++)
- printf("%02x ", PacketBuffer[i]);
- }
-
- printf("\r\n\r\n");
-
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-}
-
-/** Task to set the configuration of the attached device after it has been enumerated, and to read in
- * data received from the attached RNDIS device and print it to the serial port.
- */
-void RNDIS_Host_Task(void)
-{
- uint8_t ErrorCode;
-
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- puts_P(PSTR("Getting Config Data.\r\n"));
-
- /* Get and process the configuration descriptor data */
- if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
- {
- if (ErrorCode == ControlError)
- puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
- else
- puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
- printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
- if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- uint16_t DeviceMaxPacketSize;
- if ((ErrorCode = RNDIS_InitializeDevice(1024, &DeviceMaxPacketSize)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Initializing Device.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), DeviceMaxPacketSize);
-
- /* We set the default filter to only receive packets we would be interested in */
- uint32_t PacketFilter = (RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST | RNDIS_PACKET_TYPE_ALL_MULTICAST);
- if ((ErrorCode = RNDIS_SetRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
- &PacketFilter, sizeof(PacketFilter))) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Setting Device Packet Filter.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- uint32_t RetrievedPacketFilter;
- if ((ErrorCode = RNDIS_QueryRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
- &RetrievedPacketFilter, sizeof(RetrievedPacketFilter))) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Getting Packet Filter.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (RetrievedPacketFilter != PacketFilter)
- printf("ERROR: Retrieved Packet Filter 0x%08lx != Set Packet Filter 0x%08lx!\r\n", RetrievedPacketFilter, PacketFilter);
-
- uint32_t VendorID;
- if ((ErrorCode = RNDIS_QueryRNDISProperty(OID_GEN_VENDOR_ID,
- &VendorID, sizeof(VendorID))) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Getting Vendor ID.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Device Vendor ID: 0x%08X\r\n"), VendorID);
-
- puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
-
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- PrintIncommingPackets();
-
- break;
- }
-}
-
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.h deleted file mode 100644 index 47e5c24d1..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.h +++ /dev/null @@ -1,96 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header file for RNDISEthernetHost.c.
- */
-
-#ifndef _RNDIS_HOST_H_
-#define _RNDIS_HOST_H_
-
- /* Includes: */
- #include <avr/io.h>
- #include <avr/wdt.h>
- #include <avr/pgmspace.h>
- #include <avr/power.h>
- #include <stdio.h>
-
- #include <LUFA/Version.h>
- #include <LUFA/Drivers/Misc/TerminalCodes.h>
- #include <LUFA/Drivers/USB/USB.h>
- #include <LUFA/Drivers/Peripheral/SerialStream.h>
- #include <LUFA/Drivers/Board/LEDs.h>
-
- #include "Lib/RNDISCommands.h"
-
- #include "ConfigDescriptor.h"
-
- /* Macros: */
- /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
- #define LEDMASK_USB_NOTREADY LEDS_LED1
-
- /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */
- #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for the library LED driver, to indicate that the USB interface is ready. */
- #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4)
-
- /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
- #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3)
-
- /** LED mask for the library LED driver, to indicate that the USB interface is busy. */
- #define LEDMASK_USB_BUSY (LEDS_LED2)
-
- /* Type Defines: */
- /** Type define for a RNDIS notification message, for transmission to the RNDIS host via the notification
- * Endpoint.
- */
- typedef struct
- {
- uint8_t bmRequestType; /**< Notification type, a mask of values from SrdRequestType.h */
- uint8_t bNotification; /**< Notification index, indicating what the RNDIS notification relates to */
- uint16_t wValue; /**< Two byte notification value parameter */
- uint16_t wIndex; /**< Two byte notification index parameter */
- uint16_t wLength; /**< Size of data payload following the notification header */
- } USB_Notification_t;
-
- /* Function Prototypes: */
- void SetupHardware(void);
- void PrintIncommingPackets(void);
- void RNDIS_Host_Task(void);
-
- void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
- void EVENT_USB_Host_DeviceAttached(void);
- void EVENT_USB_Host_DeviceUnattached(void);
- void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode);
- void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
-#endif
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/makefile b/Demos/Host/Incomplete/RNDISEthernetHost/makefile deleted file mode 100644 index 32389b6f9..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/makefile +++ /dev/null @@ -1,737 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*-
-#----------------------------------------------------------------------------
-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
-# >> Modified for use with the LUFA project. <<
-#
-# Released to the Public Domain
-#
-# Additional material for this makefile was written by:
-# Peter Fleury
-# Tim Henigan
-# Colin O'Flynn
-# Reiner Patommel
-# Markus Pfaff
-# Sander Pool
-# Frederik Rouleau
-# Carlos Lamas
-# Dean Camera
-# Opendous Inc.
-# Denver Gingerich
-#
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device, using avrdude.
-# Please customize the avrdude settings below first!
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-# have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-# have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-# (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-# (must have Atmel FLIP installed).
-#
-# make doxygen = Generate DoxyGen documentation for the project (must have
-# DoxyGen installed)
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-# with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-# bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-
-# MCU name
-MCU = at90usb1287
-
-
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
-# "Board" inside the application directory.
-BOARD = USBKEY
-
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_CLOCK below, as it is sourced by
-# F_CLOCK after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 8000000
-
-
-# Input clock frequency.
-# This will define a symbol, F_CLOCK, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = $(F_CPU)
-
-
-# Output format. (can be srec, ihex, binary)
-FORMAT = ihex
-
-
-# Target file name (without extension).
-TARGET = RNDISEthernetHost
-
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-
-# Path to the LUFA library
-LUFA_PATH = ../../../..
-
-
-# LUFA library compile-time options
-LUFA_OPTS = -D USB_HOST_ONLY
-LUFA_OPTS += -D NO_STREAM_CALLBACKS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-
-
-# List C source files here. (C dependencies are automatically generated.)
-SRC = $(TARGET).c \
- ConfigDescriptor.c \
- Lib/RNDISCommands.c \
- $(LUFA_PATH)/LUFA/Drivers/Peripheral/SerialStream.c \
- $(LUFA_PATH)/LUFA/Drivers/Peripheral/Serial.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
-
-
-# List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
-
-
-# List Assembler source files here.
-# Make them always end in a capital .S. Files ending in a lowercase .s
-# will not be considered source files but generated files (assembler
-# output from the compiler), and will be deleted upon "make clean"!
-# Even though the DOS/Win* filesystem matches both .s and .S the same,
-# it will preserve the spelling of the filenames, and gcc itself does
-# care about how the name is spelled on its command-line.
-ASRC =
-
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPT = s
-
-
-# Debugging format.
-# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
-# AVR Studio 4.10 requires dwarf-2.
-# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
-DEBUG = dwarf-2
-
-
-# List any extra directories to look for include files here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
-
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu99
-
-
-# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
-
-
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-
-
-# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
-#CPPDEFS += -D__STDC_LIMIT_MACROS
-#CPPDEFS += -D__STDC_CONSTANT_MACROS
-
-
-
-#---------------- Compiler Options C ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CFLAGS = -g$(DEBUG)
-CFLAGS += $(CDEFS)
-CFLAGS += -O$(OPT)
-CFLAGS += -funsigned-char
-CFLAGS += -funsigned-bitfields
-CFLAGS += -ffunction-sections
-CFLAGS += -fno-inline-small-functions
-CFLAGS += -fpack-struct
-CFLAGS += -fshort-enums
-CFLAGS += -Wall
-CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wundef
-#CFLAGS += -fno-unit-at-a-time
-#CFLAGS += -Wunreachable-code
-#CFLAGS += -Wsign-compare
-CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-CFLAGS += $(CSTANDARD)
-
-
-#---------------- Compiler Options C++ ----------------
-# -g*: generate debugging information
-# -O*: optimization level
-# -f...: tuning, see GCC manual and avr-libc documentation
-# -Wall...: warning level
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns...: create assembler listing
-CPPFLAGS = -g$(DEBUG)
-CPPFLAGS += $(CPPDEFS)
-CPPFLAGS += -O$(OPT)
-CPPFLAGS += -funsigned-char
-CPPFLAGS += -funsigned-bitfields
-CPPFLAGS += -fpack-struct
-CPPFLAGS += -fshort-enums
-CPPFLAGS += -fno-exceptions
-CPPFLAGS += -Wall
-CFLAGS += -Wundef
-#CPPFLAGS += -mshort-calls
-#CPPFLAGS += -fno-unit-at-a-time
-#CPPFLAGS += -Wstrict-prototypes
-#CPPFLAGS += -Wunreachable-code
-#CPPFLAGS += -Wsign-compare
-CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
-#CPPFLAGS += $(CSTANDARD)
-
-
-#---------------- Assembler Options ----------------
-# -Wa,...: tell GCC to pass this to the assembler.
-# -adhlns: create listing
-# -gstabs: have the assembler create line number information; note that
-# for use in COFF files, additional information about filenames
-# and function names needs to be present in the assembler source
-# files -- see avr-libc docs [FIXME: not yet described there]
-# -listing-cont-lines: Sets the maximum number of continuation lines of hex
-# dump that will be displayed for a given single line of source input.
-ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
-
-
-#---------------- Library Options ----------------
-# Minimalistic printf version
-PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
-
-# Floating point printf version (requires MATH_LIB = -lm below)
-PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
-
-# If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
-#PRINTF_LIB = $(PRINTF_LIB_MIN)
-#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
-
-
-# Minimalistic scanf version
-SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
-
-# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
-SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
-
-# If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
-#SCANF_LIB = $(SCANF_LIB_MIN)
-#SCANF_LIB = $(SCANF_LIB_FLOAT)
-
-
-MATH_LIB = -lm
-
-
-# List any extra directories to look for libraries here.
-# Each directory must be seperated by a space.
-# Use forward slashes for directory separators.
-# For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
-
-
-
-#---------------- External Memory Options ----------------
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# used for variables (.data/.bss) and heap (malloc()).
-#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
-
-# 64 KB of external RAM, starting after internal RAM (ATmega128!),
-# only used for heap (malloc()).
-#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
-
-EXTMEMOPTS =
-
-
-
-#---------------- Linker Options ----------------
-# -Wl,...: tell GCC to pass this to linker.
-# -Map: create map file
-# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
-LDFLAGS += -Wl,--gc-sections
-LDFLAGS += $(EXTMEMOPTS)
-LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
-LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
-#LDFLAGS += -T linker_script.x
-
-
-
-#---------------- Programming Options (avrdude) ----------------
-
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
-# Type: avrdude -c ?
-# to get a full listing.
-#
-AVRDUDE_PROGRAMMER = jtagmkII
-
-# com1 = serial port. Use lpt1 to connect to parallel port.
-AVRDUDE_PORT = usb
-
-AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
-#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
-
-
-# Uncomment the following if you want avrdude's erase cycle counter.
-# Note that this counter needs to be initialized first using -Yn,
-# see avrdude manual.
-#AVRDUDE_ERASE_COUNTER = -y
-
-# Uncomment the following if you do /not/ wish a verification to be
-# performed after programming the device.
-#AVRDUDE_NO_VERIFY = -V
-
-# Increase verbosity level. Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
-# to submit bug reports.
-#AVRDUDE_VERBOSE = -v -v
-
-AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
-AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
-AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
-
-
-
-#---------------- Debugging Options ----------------
-
-# For simulavr only - target MCU frequency.
-DEBUG_MFREQ = $(F_CPU)
-
-# Set the DEBUG_UI to either gdb or insight.
-# DEBUG_UI = gdb
-DEBUG_UI = insight
-
-# Set the debugging back-end to either avarice, simulavr.
-DEBUG_BACKEND = avarice
-#DEBUG_BACKEND = simulavr
-
-# GDB Init Filename.
-GDBINIT_FILE = __avr_gdbinit
-
-# When using avarice settings for the JTAG
-JTAG_DEV = /dev/com1
-
-# Debugging port used to communicate between GDB / avarice / simulavr.
-DEBUG_PORT = 4242
-
-# Debugging host used to communicate between GDB / avarice / simulavr, normally
-# just set to localhost unless doing some sort of crazy debugging when
-# avarice is running on a different computer.
-DEBUG_HOST = localhost
-
-
-
-#============================================================================
-
-
-# Define programs and commands.
-SHELL = sh
-CC = avr-gcc
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
-SIZE = avr-size
-AR = avr-ar rcs
-NM = avr-nm
-AVRDUDE = avrdude
-REMOVE = rm -f
-REMOVEDIR = rm -rf
-COPY = cp
-WINSHELL = cmd
-
-# Define Messages
-# English
-MSG_ERRORS_NONE = Errors: none
-MSG_BEGIN = -------- begin --------
-MSG_END = -------- end --------
-MSG_SIZE_BEFORE = Size before:
-MSG_SIZE_AFTER = Size after:
-MSG_COFF = Converting to AVR COFF:
-MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
-MSG_FLASH = Creating load file for Flash:
-MSG_EEPROM = Creating load file for EEPROM:
-MSG_EXTENDED_LISTING = Creating Extended Listing:
-MSG_SYMBOL_TABLE = Creating Symbol Table:
-MSG_LINKING = Linking:
-MSG_COMPILING = Compiling C:
-MSG_COMPILING_CPP = Compiling C++:
-MSG_ASSEMBLING = Assembling:
-MSG_CLEANING = Cleaning project:
-MSG_CREATING_LIBRARY = Creating library:
-
-
-
-
-# Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
-
-# Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
-
-
-# Compiler flags to generate dependency files.
-GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
-
-
-# Combine all necessary flags and optional flags.
-# Add target processor to flags.
-ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
-ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
-ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
-
-
-
-
-
-# Default target.
-all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
-
-# Change the build target to build a HEX file or a library.
-build: elf hex eep lss sym
-#build: lib
-
-
-elf: $(TARGET).elf
-hex: $(TARGET).hex
-eep: $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-LIBNAME=lib$(TARGET).a
-lib: $(LIBNAME)
-
-
-
-# Eye candy.
-# AVR Studio 3.x does not check make's exit code but relies on
-# the following magic strings to be generated by the compile job.
-begin:
- @echo
- @echo $(MSG_BEGIN)
-
-end:
- @echo $(MSG_END)
- @echo
-
-
-# Display size of file.
-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-sizebefore:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-sizeafter:
- @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
- 2>/dev/null; echo; fi
-
-$(LUFA_PATH)/LUFA/LUFA_Events.lst:
- @make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst
-
-checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
- @echo
- @echo Checking for invalid events...
- @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
- grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
- @sed -n -e 's/^/ WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
- @if test -s InvalidEvents.tmp; then exit 1; fi
-
-showliboptions:
- @echo
- @echo ---- Compile Time Library Options ----
- @for i in $(LUFA_OPTS:-D%=%); do \
- echo $$i; \
- done
- @echo --------------------------------------
-
-showtarget:
- @echo
- @echo --------- Target Information ---------
- @echo AVR Model: $(MCU)
- @echo Board: $(BOARD)
- @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
- @echo --------------------------------------
-
-
-# Display compiler version information.
-gccversion :
- @$(CC) --version
-
-
-# Program the device.
-program: $(TARGET).hex $(TARGET).eep
- $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-
-flip: $(TARGET).hex
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-dfu: $(TARGET).hex
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
- dfu-programmer $(MCU) reset
-
-flip-ee: $(TARGET).hex $(TARGET).eep
- $(COPY) $(TARGET).eep $(TARGET)eep.hex
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- $(REMOVE) $(TARGET)eep.hex
-
-dfu-ee: $(TARGET).hex $(TARGET).eep
- dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
- dfu-programmer $(MCU) reset
-
-
-# Generate avr-gdb config/init file which does the following:
-# define the reset signal, load the target file, connect to target, and set
-# a breakpoint at main().
-gdb-config:
- @$(REMOVE) $(GDBINIT_FILE)
- @echo define reset >> $(GDBINIT_FILE)
- @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
- @echo end >> $(GDBINIT_FILE)
- @echo file $(TARGET).elf >> $(GDBINIT_FILE)
- @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
-ifeq ($(DEBUG_BACKEND),simulavr)
- @echo load >> $(GDBINIT_FILE)
-endif
- @echo break main >> $(GDBINIT_FILE)
-
-debug: gdb-config $(TARGET).elf
-ifeq ($(DEBUG_BACKEND), avarice)
- @echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
- @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
- $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
- @$(WINSHELL) /c pause
-
-else
- @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
- $(DEBUG_MFREQ) --port $(DEBUG_PORT)
-endif
- @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
-
-
-
-
-# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
-COFFCONVERT = $(OBJCOPY) --debugging
-COFFCONVERT += --change-section-address .data-0x800000
-COFFCONVERT += --change-section-address .bss-0x800000
-COFFCONVERT += --change-section-address .noinit-0x800000
-COFFCONVERT += --change-section-address .eeprom-0x810000
-
-
-
-coff: $(TARGET).elf
- @echo
- @echo $(MSG_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-avr $< $(TARGET).cof
-
-
-extcoff: $(TARGET).elf
- @echo
- @echo $(MSG_EXTENDED_COFF) $(TARGET).cof
- $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
-
-
-
-# Create final output files (.hex, .eep) from ELF output file.
-%.hex: %.elf
- @echo
- @echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
-
-%.eep: %.elf
- @echo
- @echo $(MSG_EEPROM) $@
- -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
- --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
-
-# Create extended listing file from ELF output file.
-%.lss: %.elf
- @echo
- @echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -z -S $< > $@
-
-# Create a symbol table from ELF output file.
-%.sym: %.elf
- @echo
- @echo $(MSG_SYMBOL_TABLE) $@
- $(NM) -n $< > $@
-
-
-
-# Create library from object files.
-.SECONDARY : $(TARGET).a
-.PRECIOUS : $(OBJ)
-%.a: $(OBJ)
- @echo
- @echo $(MSG_CREATING_LIBRARY) $@
- $(AR) $@ $(OBJ)
-
-
-# Link: create ELF output file from object files.
-.SECONDARY : $(TARGET).elf
-.PRECIOUS : $(OBJ)
-%.elf: $(OBJ)
- @echo
- @echo $(MSG_LINKING) $@
- $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
-
-
-# Compile: create object files from C source files.
-$(OBJDIR)/%.o : %.c
- @echo
- @echo $(MSG_COMPILING) $<
- $(CC) -c $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create object files from C++ source files.
-$(OBJDIR)/%.o : %.cpp
- @echo
- @echo $(MSG_COMPILING_CPP) $<
- $(CC) -c $(ALL_CPPFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C source files.
-%.s : %.c
- $(CC) -S $(ALL_CFLAGS) $< -o $@
-
-
-# Compile: create assembler files from C++ source files.
-%.s : %.cpp
- $(CC) -S $(ALL_CPPFLAGS) $< -o $@
-
-
-# Assemble: create object files from assembler source files.
-$(OBJDIR)/%.o : %.S
- @echo
- @echo $(MSG_ASSEMBLING) $<
- $(CC) -c $(ALL_ASFLAGS) $< -o $@
-
-
-# Create preprocessed source for use in sending a bug report.
-%.i : %.c
- $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
-
-# Target: clean project.
-clean: begin clean_list clean_binary end
-
-clean_binary:
- $(REMOVE) $(TARGET).hex
-
-clean_list:
- @echo $(MSG_CLEANING)
- $(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET)eep.hex
- $(REMOVE) $(TARGET).cof
- $(REMOVE) $(TARGET).elf
- $(REMOVE) $(TARGET).map
- $(REMOVE) $(TARGET).sym
- $(REMOVE) $(TARGET).lss
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
- $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
- $(REMOVE) $(SRC:.c=.s)
- $(REMOVE) $(SRC:.c=.d)
- $(REMOVE) $(SRC:.c=.i)
- $(REMOVE) InvalidEvents.tmp
- $(REMOVEDIR) .dep
-
-doxygen:
- @echo Generating Project Documentation...
- @doxygen Doxygen.conf
- @echo Documentation Generation Complete.
-
-clean_doxygen:
- rm -rf Documentation
-
-# Create object files directory
-$(shell mkdir $(OBJDIR) 2>/dev/null)
-
-
-# Include the dependency files.
--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
-
-
-# Listing of phony targets.
-.PHONY : all checkinvalidevents showliboptions \
-showtarget begin finish end sizebefore sizeafter \
-gccversion build elf hex eep lss sym coff extcoff \
-program dfu flip flip-ee dfu-ee clean debug \
-clean_list clean_binary gdb-config doxygen
\ No newline at end of file |