diff options
Diffstat (limited to 'Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c')
| -rw-r--r-- | Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c | 295 |
1 files changed, 0 insertions, 295 deletions
diff --git a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c deleted file mode 100644 index 237d94dfe..000000000 --- a/Demos/Host/Incomplete/RNDISEthernetHost/RNDISEthernetHost.c +++ /dev/null @@ -1,295 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
- * the demo and is responsible for the initial application hardware configuration.
- */
-
-#include "RNDISEthernetHost.h"
-
-/** Main program entry point. This routine configures the hardware required by the application, then
- * enters a loop to run the application tasks in sequence.
- */
-int main(void)
-{
- SetupHardware();
-
- puts_P(PSTR(ESC_FG_CYAN "RNDIS Host Demo running.\r\n" ESC_FG_WHITE));
-
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-
- for (;;)
- {
- RNDIS_Host_Task();
- USB_USBTask();
- }
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
- /* Disable watchdog if enabled by bootloader/fuses */
- MCUSR &= ~(1 << WDRF);
- wdt_disable();
-
- /* Disable clock division */
- clock_prescale_set(clock_div_1);
-
- /* Hardware Initialization */
- SerialStream_Init(9600, false);
- LEDs_Init();
- USB_Init();
-}
-
-/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
- * starts the library USB task to begin the enumeration and USB management process.
- */
-void EVENT_USB_Host_DeviceAttached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "Device Attached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and
- * stops the library USB task management process.
- */
-void EVENT_USB_Host_DeviceUnattached(void)
-{
- puts_P(PSTR(ESC_FG_GREEN "\r\nDevice Unattached.\r\n" ESC_FG_WHITE));
- LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
- * enumerated by the host and is now ready to be used by the application.
- */
-void EVENT_USB_Host_DeviceEnumerationComplete(void)
-{
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-}
-
-/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
-void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
-{
- USB_ShutDown();
-
- printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
- " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- for(;;);
-}
-
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
- * enumerating an attached USB device.
- */
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
-{
- printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
- " -- Error Code %d\r\n"
- " -- Sub Error Code %d\r\n"
- " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-}
-
-void PrintIncommingPackets(void)
-{
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(RNDIS_DATAPIPE_IN);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_Freeze();
- return;
- }
-
- LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
- puts_P(PSTR("DATA IN\r\n"));
-
- uint16_t PacketLength;
- if ((ErrorCode = RNDIS_GetPacketLength(&PacketLength)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Packet Reception Error.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
- return;
- }
-
- printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength);
-
- if (PacketLength > 1024)
- {
- puts_P(PSTR(ESC_FG_RED "Packet too large.\r\n" ESC_FG_WHITE));
- Pipe_Discard_Stream(PacketLength);
- }
- else
- {
- uint8_t PacketBuffer[PacketLength];
-
- Pipe_Read_Stream_LE(&PacketBuffer, PacketLength);
-
- for (uint16_t i = 0; i < PacketLength; i++)
- printf("%02x ", PacketBuffer[i]);
- }
-
- printf("\r\n\r\n");
-
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-}
-
-/** Task to set the configuration of the attached device after it has been enumerated, and to read in
- * data received from the attached RNDIS device and print it to the serial port.
- */
-void RNDIS_Host_Task(void)
-{
- uint8_t ErrorCode;
-
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- puts_P(PSTR("Getting Config Data.\r\n"));
-
- /* Get and process the configuration descriptor data */
- if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
- {
- if (ErrorCode == ControlError)
- puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
- else
- puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
-
- printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
- if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- uint16_t DeviceMaxPacketSize;
- if ((ErrorCode = RNDIS_InitializeDevice(1024, &DeviceMaxPacketSize)) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Initializing Device.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), DeviceMaxPacketSize);
-
- /* We set the default filter to only receive packets we would be interested in */
- uint32_t PacketFilter = (RNDIS_PACKET_TYPE_DIRECTED | RNDIS_PACKET_TYPE_BROADCAST | RNDIS_PACKET_TYPE_ALL_MULTICAST);
- if ((ErrorCode = RNDIS_SetRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
- &PacketFilter, sizeof(PacketFilter))) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Setting Device Packet Filter.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- uint32_t RetrievedPacketFilter;
- if ((ErrorCode = RNDIS_QueryRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER,
- &RetrievedPacketFilter, sizeof(RetrievedPacketFilter))) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Getting Packet Filter.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (RetrievedPacketFilter != PacketFilter)
- printf("ERROR: Retrieved Packet Filter 0x%08lx != Set Packet Filter 0x%08lx!\r\n", RetrievedPacketFilter, PacketFilter);
-
- uint32_t VendorID;
- if ((ErrorCode = RNDIS_QueryRNDISProperty(OID_GEN_VENDOR_ID,
- &VendorID, sizeof(VendorID))) != HOST_SENDCONTROL_Successful)
- {
- printf_P(PSTR(ESC_FG_RED "Error Getting Vendor ID.\r\n"
- " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
-
- /* Indicate error via status LEDs */
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-
- /* Wait until USB device disconnected */
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Device Vendor ID: 0x%08X\r\n"), VendorID);
-
- puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
-
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- PrintIncommingPackets();
-
- break;
- }
-}
-
|