diff options
Diffstat (limited to 'Demos/Device/Incomplete/TestAndMeasurement')
5 files changed, 61 insertions, 56 deletions
diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c index aac16909d..9c66459a8 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Peter Lawrence (majbthrd [at] gmail [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,9 +31,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -84,61 +84,61 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Interface = + + .Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 3, - + .Class = 0xFE, .SubClass = 0x03, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .DataOutEndpoint = + .DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | TMC_OUT_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, .PollingIntervalMS = 0x00 }, - - .DataInEndpoint = + + .DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | TMC_IN_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, .PollingIntervalMS = 0x00 }, - - .NotificationEndpoint = + + .NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | TMC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_NOTIFICATION_EPSIZE, @@ -201,30 +201,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h index fefb6b555..dc3505f6d 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h @@ -79,3 +79,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif
+ diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c index 7949a7ebd..01d3e66bc 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -429,3 +429,4 @@ uint8_t StreamCallback_AbortOUTOnRequest(void) /* Continue with the current stream operation */
return STREAMCALLBACK_Continue;
}
+ diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h index d0db01ef9..f069e8eb9 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h @@ -154,3 +154,4 @@ uint8_t StreamCallback_AbortOUTOnRequest(void);
#endif
+ diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index c4c1c059b..7e282ed57 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + |