diff options
Diffstat (limited to 'Demos')
404 files changed, 7334 insertions, 6944 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.c b/Demos/Device/ClassDriver/AudioInput/AudioInput.c index ceaeb89a1..dc7a076e4 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.c +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { ProcessNextSample(); @@ -79,13 +79,13 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ LEDs_Init(); USB_Init(); ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32); ADC_SetupChannel(MIC_IN_ADC_CHANNEL); - + /* Start the ADC conversion in free running mode */ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK); } @@ -103,7 +103,7 @@ void ProcessNextSample(void) /* Audio sample is ADC value scaled to fit the entire range */ int16_t AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult()); - + #if defined(MICROPHONE_BIASED_TO_HALF_RAIL) /* Microphone is biased to half rail voltage, subtract the bias from the sample value */ AudioSample -= (SAMPLE_MAX_RANGE / 2); @@ -148,3 +148,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { Audio_Device_ProcessControlRequest(&Microphone_Audio_Interface); } + diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.h b/Demos/Device/ClassDriver/AudioInput/AudioInput.h index 9231f8962..8ed6096f0 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.h +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for AudioInput.c. */ - + #ifndef _AUDIO_INPUT_H_ #define _AUDIO_INPUT_H_ @@ -53,7 +53,7 @@ /* Macros: */ /** ADC channel number for the microphone input. */ #define MIC_IN_ADC_CHANNEL 2 - + /** ADC channel MUX mask for the microphone input. */ #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 @@ -85,3 +85,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt index aba582d67..830163f3b 100644 --- a/Demos/Device/ClassDriver/AudioInput/AudioInput.txt +++ b/Demos/Device/ClassDriver/AudioInput/AudioInput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Input Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,19 +43,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Input device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB microphone. Incoming audio from the ADC channel 1 will * be sampled and sent to the host computer. - * + * * To use, connect a microphone to the ADC channel 1. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -81,3 +81,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.c b/Demos/Device/ClassDriver/AudioInput/Descriptors.c index c01e10129..8ac88bd82 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -86,13 +86,13 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - .Audio_ControlInterface = + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, .Class = 0x01, @@ -102,7 +102,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_ControlInterface_SPC = + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, @@ -111,12 +111,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) + sizeof(USB_Audio_Descriptor_InputTerminal_t) + sizeof(USB_Audio_Descriptor_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, @@ -132,7 +132,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, @@ -146,7 +146,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, @@ -162,7 +162,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, @@ -178,7 +178,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_SPC = + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, @@ -189,24 +189,24 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .AudioFormat = 0x0001 }, - .Audio_AudioFormat = + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType, .FormatType = 0x01, .Channels = 0x01, - + .SubFrameSize = 0x02, .BitResolution = 16, .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, - + .SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -215,18 +215,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, - + .Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -287,30 +287,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/AudioInput/Descriptors.h b/Demos/Device/ClassDriver/AudioInput/Descriptors.h index caf6075cc..5ca7afbf5 100644 --- a/Demos/Device/ClassDriver/AudioInput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioInput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -45,7 +45,7 @@ /* Macros: */ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. @@ -82,3 +82,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/AudioInput/makefile b/Demos/Device/ClassDriver/AudioInput/makefile index 636637dbc..8eda3c68b 100644 --- a/Demos/Device/ClassDriver/AudioInput/makefile +++ b/Demos/Device/ClassDriver/AudioInput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -137,7 +137,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -150,7 +150,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -264,7 +264,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -277,7 +277,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -289,7 +289,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -301,7 +301,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -324,7 +324,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -358,7 +358,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -392,7 +392,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -421,7 +421,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -440,10 +440,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -508,11 +508,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -539,9 +539,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -639,14 +639,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -668,7 +668,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -712,3 +712,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index cf2eb2d30..33b52a184 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { ProcessNextSample(); @@ -135,7 +135,7 @@ void ProcessNextSample(void) void EVENT_USB_Device_Connect(void) { LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + /* Sample reload timer initialization */ OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1; TCCR0A = (1 << WGM01); // CTC mode @@ -200,3 +200,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface); } + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h index 5a7b2efe8..62498cb7f 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,13 +44,13 @@ #include <stdlib.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Audio.h> - - /* Macros: */ + + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -62,14 +62,15 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void ProcessNextSample(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 079b537b0..c42fc744b 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Output Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,13 +43,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Output device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB speaker. Outgoing audio will output in 8-bit PWM onto * the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on @@ -57,7 +57,7 @@ * mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on * the board LEDs in all modes. Decouple audio outputs with a capacitor and * attach to a speaker to hear the audio. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -94,3 +94,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c index b82d5ab22..35ceeb29a 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,133 +80,133 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) + sizeof(USB_Audio_Descriptor_InputTerminal_t) + sizeof(USB_Audio_Descriptor_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .TerminalID = 0x01, .TerminalType = AUDIO_TERMINAL_STREAMING, .AssociatedOutputTerminal = 0x00, - + .TotalChannels = 2, .ChannelConfig = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT), - + .ChannelStrIndex = NO_DESCRIPTOR, .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .TerminalID = 0x02, .TerminalType = AUDIO_TERMINAL_OUT_SPEAKER, .AssociatedInputTerminal = 0x00, - + .SourceID = 0x01, - + .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 1, - + .TotalEndpoints = 1, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, - + .TerminalLink = 0x01, - + .FrameDelay = 1, .AudioFormat = 0x0001 }, - - .Audio_AudioFormat = + + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType, .FormatType = 0x01, .Channels = 0x02, - + .SubFrameSize = 0x02, .BitResolution = 16, - .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, + .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, .SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -215,18 +215,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, - + .Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -291,26 +291,27 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h index 588f584e9..5ca7afbf5 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -45,16 +45,16 @@ /* Macros: */ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. */ #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) - + /** Sample frequency of the data being transmitted through the streaming endpoint. */ #define AUDIO_SAMPLE_FREQUENCY 48000 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -74,7 +74,7 @@ USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint; USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -82,3 +82,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 660399b43..9ff71b2e1 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -139,7 +139,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -152,7 +152,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -266,7 +266,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -279,7 +279,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -291,7 +291,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -303,7 +303,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -326,7 +326,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -360,7 +360,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -394,7 +394,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -423,7 +423,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -442,10 +442,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -510,11 +510,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -541,9 +541,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -641,14 +641,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -670,7 +670,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -714,3 +714,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c index 592f488b9..775ab0828 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0xEF, .SubClass = 0x02, .Protocol = 0x01, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204E, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,22 +83,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 4, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC1_IAD = + + .CDC1_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -112,94 +112,94 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - .CDC1_CCI_Interface = + .CDC1_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC1_Functional_Header = + .CDC1_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC1_Functional_ACM = + .CDC1_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC1_Functional_Union = + + .CDC1_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC1_ManagementEndpoint = + .CDC1_ManagementEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC1_DCI_Interface = + .CDC1_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC1_DataOutEndpoint = + .CDC1_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC1_DataInEndpoint = + + .CDC1_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - .CDC2_IAD = + .CDC2_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -213,87 +213,87 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - .CDC2_CCI_Interface = + .CDC2_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 2, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC2_Functional_Header = + .CDC2_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC2_Functional_ACM = + .CDC2_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC2_Functional_Union = + + .CDC2_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 2, .SlaveInterfaceNumber = 3, }, - .CDC2_ManagementEndpoint = + .CDC2_ManagementEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC2_DCI_Interface = + .CDC2_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 3, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC2_DataOutEndpoint = + .CDC2_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC2_DataInEndpoint = + + .CDC2_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -356,30 +356,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h index 5c1bf53bb..fba85e805 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -102,3 +102,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c index 915c8fc98..c6e7b423e 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -92,7 +92,7 @@ USB_ClassInfo_CDC_Device_t VirtualSerial2_CDC_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -107,7 +107,7 @@ int main(void) int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial2_CDC_Interface); if (!(ReceivedByte < 0)) CDC_Device_SendByte(&VirtualSerial2_CDC_Interface, (uint8_t)ReceivedByte); - + CDC_Device_USBTask(&VirtualSerial1_CDC_Interface); CDC_Device_USBTask(&VirtualSerial2_CDC_Interface); USB_USBTask(); @@ -151,12 +151,12 @@ void CheckJoystickMovement(void) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; - + if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; - - CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString, strlen(ReportString)); + + CDC_Device_SendString(&VirtualSerial1_CDC_Interface, ReportString, strlen(ReportString)); } } @@ -189,3 +189,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) CDC_Device_ProcessControlRequest(&VirtualSerial1_CDC_Interface); CDC_Device_ProcessControlRequest(&VirtualSerial2_CDC_Interface); } + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h index e1ac0bb5a..eccb4d859 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -63,7 +63,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); @@ -74,3 +74,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt index 3959f89c4..662ec9199 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/ClassDriver/DualVirtualSerial/DualVirtualSerial.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -46,7 +46,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Dual Communications Device Class demonstration application. * This gives a simple reference application for implementing @@ -56,13 +56,13 @@ * descriptors for each virtual serial port, which may not be * supported in all OSes - Windows Vista is supported, as is * XP (although the latter may need a hotfix to function). - * + * * Joystick actions are transmitted to the host as strings * through the first serial port. The device does not respond to * serial data sent from the host in the first serial port. - * + * * The second serial port echoes back data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -83,3 +83,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/makefile b/Demos/Device/ClassDriver/DualVirtualSerial/makefile index 880afe691..c9c034924 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/makefile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.c b/Demos/Device/ClassDriver/GenericHID/Descriptors.c index 2d9ec83a8..1e78837cd 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.c +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -71,22 +71,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204F, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -97,41 +97,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x00, .Protocol = HID_BOOTP_NonBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_GenericHID = + .HID_GenericHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -139,10 +139,10 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(GenericReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, @@ -157,7 +157,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -168,7 +168,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -179,7 +179,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Generic HID Demo" }; @@ -205,38 +205,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_GenericHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &GenericReport; Size = sizeof(GenericReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/GenericHID/Descriptors.h b/Demos/Device/ClassDriver/GenericHID/Descriptors.h index 23396f3f5..de427e626 100644 --- a/Demos/Device/ClassDriver/GenericHID/Descriptors.h +++ b/Demos/Device/ClassDriver/GenericHID/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -61,14 +61,15 @@ /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 - + /** Size in bytes of the Generic HID reports (including report ID byte). */ #define GENERIC_REPORT_SIZE 8 - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, const void** const DescriptorAddress) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - + #endif + diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.c b/Demos/Device/ClassDriver/GenericHID/GenericHID.c index d64c1648e..d982d94a9 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.c +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = .ReportINEndpointNumber = GENERIC_IN_EPNUM, .ReportINEndpointSize = GENERIC_EPSIZE, .ReportINEndpointDoubleBank = false, - + .PrevReportINBuffer = PrevHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevHIDReportBuffer), }, @@ -72,10 +72,10 @@ USB_ClassInfo_HID_Device_t Generic_HID_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { HID_Device_USBTask(&Generic_HID_Interface); @@ -101,7 +101,7 @@ void SetupHardware(void) /** Event handler for the library USB Connection event. */ void EVENT_USB_Device_Connect(void) { - LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); } /** Event handler for the library USB Disconnection event. */ @@ -154,7 +154,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn *ReportID = HIDReportEcho.ReportID; memcpy(ReportData, HIDReportEcho.ReportData, HIDReportEcho.ReportSize); - + *ReportSize = HIDReportEcho.ReportSize; return true; } @@ -177,3 +177,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI HIDReportEcho.ReportSize = ReportSize; memcpy(HIDReportEcho.ReportData, ReportData, ReportSize); } + diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.h b/Demos/Device/ClassDriver/GenericHID/GenericHID.h index e61e9571f..28a2c440e 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.h +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for GenericHID.c. */ - + #ifndef _GENERICHID_H_ #define _GENERICHID_H_ @@ -42,7 +42,7 @@ #include <avr/power.h> #include <avr/interrupt.h> #include <string.h> - + #include "Descriptors.h" #include <LUFA/Version.h> @@ -78,9 +78,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); - + #endif + diff --git a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt index b73a9512d..60920c7fb 100644 --- a/Demos/Device/ClassDriver/GenericHID/GenericHID.txt +++ b/Demos/Device/ClassDriver/GenericHID/GenericHID.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Generic HID Device * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Generic HID device demonstration application. This gives a simple reference application * for implementing a generic HID device, using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports * to and from a USB Host, and transmits the last sent report back to the host. - * + * * On start-up the system will automatically enumerate and function as a vendor HID device. * When controlled by a custom HID class application, reports can be sent and received by * both the standard data endpoint and control request methods defined in the HID specification. * * \section SSec_Options Project Options - * + * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> @@ -73,3 +73,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/GenericHID/makefile b/Demos/Device/ClassDriver/GenericHID/makefile index e38cb96ad..5c7e78ee7 100644 --- a/Demos/Device/ClassDriver/GenericHID/makefile +++ b/Demos/Device/ClassDriver/GenericHID/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.c b/Demos/Device/ClassDriver/Joystick/Descriptors.c index 6000e0e20..4b8dae4f5 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.c +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2043, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,41 +107,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x00, .Protocol = HID_BOOTP_NonBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_JoystickHID = + .HID_JoystickHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -149,15 +149,15 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(JoystickReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | JOYSTICK_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, .PollingIntervalMS = 0x0A - } + } }; /** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Joystick Demo" }; @@ -215,38 +215,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_JoystickHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &JoystickReport; Size = sizeof(JoystickReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/Joystick/Descriptors.h b/Demos/Device/ClassDriver/Joystick/Descriptors.h index 0d7d45660..878b0380c 100644 --- a/Demos/Device/ClassDriver/Joystick/Descriptors.h +++ b/Demos/Device/ClassDriver/Joystick/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.c b/Demos/Device/ClassDriver/Joystick/Joystick.c index c759e1346..72cff3606 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.c +++ b/Demos/Device/ClassDriver/Joystick/Joystick.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -64,10 +64,10 @@ USB_ClassInfo_HID_Device_t Joystick_HID_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { HID_Device_USBTask(&Joystick_HID_Interface); @@ -145,7 +145,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_JoystickReport_Data_t* JoystickReport = (USB_JoystickReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -161,10 +161,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) JoystickReport->Button = (1 << 1); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) JoystickReport->Button |= (1 << 0); - + *ReportSize = sizeof(USB_JoystickReport_Data_t); return false; } @@ -185,3 +185,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.h b/Demos/Device/ClassDriver/Joystick/Joystick.h index a8151cdf1..821400196 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.h +++ b/Demos/Device/ClassDriver/Joystick/Joystick.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Joystick.c. */ - + #ifndef _JOYSTICK_H_ #define _JOYSTICK_H_ @@ -62,7 +62,7 @@ int8_t Y; /**< Current absolute joystick Y position, as a signed 8-bit integer */ uint8_t Button; /**< Bit mask of the currently pressed joystick buttons */ } USB_JoystickReport_Data_t; - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -91,9 +91,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/Joystick/Joystick.txt b/Demos/Device/ClassDriver/Joystick/Joystick.txt index 5b1495cbc..0a8dff697 100644 --- a/Demos/Device/ClassDriver/Joystick/Joystick.txt +++ b/Demos/Device/ClassDriver/Joystick/Joystick.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Joystick Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Joystick demonstration application. This gives a simple reference * application for implementing a USB Keyboard device, for USB Joysticks * using the standard Keyboard HID profile. - * + * * This device will show up as a generic joystick device, with two buttons. * Pressing the joystick inwards is the first button, and the HWB button * is the second. - * + * * Moving the joystick on the selected board moves the joystick location on * the host computer. - * + * * Currently only single interface joysticks are supported. * * \section SSec_Options Project Options @@ -71,3 +71,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/Joystick/makefile b/Demos/Device/ClassDriver/Joystick/makefile index 40debcb4c..ff8ffea13 100644 --- a/Demos/Device/ClassDriver/Joystick/makefile +++ b/Demos/Device/ClassDriver/Joystick/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.c b/Demos/Device/ClassDriver/Keyboard/Descriptors.c index 3b2acdd7f..90952ef17 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.c @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -87,22 +87,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2042, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -113,49 +113,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_KeyboardBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_KeyboardHID = - { + .HID_KeyboardHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID_ReportINEndpoint = + + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -173,7 +173,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -184,7 +184,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Keyboard Demo" }; @@ -217,42 +217,43 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_KeyboardHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &KeyboardReport; Size = sizeof(KeyboardReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/Keyboard/Descriptors.h b/Demos/Device/ClassDriver/Keyboard/Descriptors.h index 25629fd64..d94beb718 100644 --- a/Demos/Device/ClassDriver/Keyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/Keyboard/Descriptors.h @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -54,12 +54,12 @@ USB_HID_Descriptor_HID_t HID_KeyboardHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPNUM 1 - - /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ + + /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 /* Function Prototypes: */ @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.c b/Demos/Device/ClassDriver/Keyboard/Keyboard.c index 755c25a72..33f52d662 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.c +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -67,7 +67,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { HID_Device_USBTask(&Keyboard_HID_Interface); @@ -142,12 +142,12 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn const uint8_t ReportType, void* ReportData, uint16_t* const ReportSize) { USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); uint8_t UsedKeyCodes = 0; - + if (JoyStatus_LCL & JOY_UP) KeyboardReport->KeyCode[UsedKeyCodes++] = 0x04; // A else if (JoyStatus_LCL & JOY_DOWN) @@ -160,7 +160,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) KeyboardReport->KeyCode[UsedKeyCodes++] = 0x08; // E - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) KeyboardReport->KeyCode[UsedKeyCodes++] = 0x09; // F @@ -190,12 +190,13 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK) LEDMask |= LEDS_LED4; - + LEDs_SetAllLEDs(LEDMask); } + diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.h b/Demos/Device/ClassDriver/Keyboard/Keyboard.h index fd7bf5198..b2b29a379 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.h +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -52,7 +52,7 @@ #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -65,7 +65,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); @@ -81,9 +81,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt index d4b414471..447b81f89 100644 --- a/Demos/Device/ClassDriver/Keyboard/Keyboard.txt +++ b/Demos/Device/ClassDriver/Keyboard/Keyboard.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Keyboard Subclass</td> * </tr> @@ -50,8 +50,8 @@ * for implementing a USB Keyboard using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). It is boot protocol compatible, and thus * works under compatible BIOS as if it was a native keyboard (e.g. PS/2). - * - * On start-up the system will automatically enumerate and function as a keyboard + * + * On start-up the system will automatically enumerate and function as a keyboard * when the USB connection to a host is present. To use the keyboard example, * manipulate the joystick to send the letters a, b, c, d and e. See the USB HID * documentation for more information on sending keyboard event and key presses. Unlike @@ -59,7 +59,7 @@ * inside the same report to the host. * * \section SSec_Options Project Options - * + * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/Keyboard/makefile b/Demos/Device/ClassDriver/Keyboard/makefile index a16fafb28..d31b068dd 100644 --- a/Demos/Device/ClassDriver/Keyboard/makefile +++ b/Demos/Device/ClassDriver/Keyboard/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c index 1f2411662..b18920fa6 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.c @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -120,22 +120,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204D, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -146,49 +146,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID1_KeyboardInterface = + + .HID1_KeyboardInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_KeyboardBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID1_KeyboardHID = - { + .HID1_KeyboardHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID1_ReportINEndpoint = + + .HID1_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -198,34 +198,34 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x0A }, - .HID2_MouseInterface = + .HID2_MouseInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x01, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID2_MouseHID = - { + .HID2_MouseHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(MouseReport) }, - - .HID2_ReportINEndpoint = + + .HID2_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -243,7 +243,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -254,7 +254,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -265,7 +265,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse and Keyboard Demo" }; @@ -287,33 +287,33 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: if (!(wIndex)) { Address = &ConfigurationDescriptor.HID1_KeyboardHID; @@ -322,24 +322,25 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, else { Address = &ConfigurationDescriptor.HID2_MouseHID; - Size = sizeof(USB_HID_Descriptor_HID_t); + Size = sizeof(USB_HID_Descriptor_HID_t); } break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: if (!(wIndex)) { Address = &KeyboardReport; Size = sizeof(KeyboardReport); } else - { + { Address = &MouseReport; Size = sizeof(MouseReport); } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h index b0d8f5a6b..83636e0fa 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/Descriptors.h @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -57,7 +57,7 @@ USB_HID_Descriptor_HID_t HID2_MouseHID; USB_Descriptor_Endpoint_t HID2_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_IN_EPNUM 1 @@ -75,3 +75,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c index 96c430a22..45bb06b6e 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.c @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -61,7 +61,7 @@ USB_ClassInfo_HID_Device_t Keyboard_HID_Interface = .PrevReportINBufferSize = sizeof(PrevKeyboardHIDReportBuffer), }, }; - + /** LUFA HID Class driver interface configuration and state information. This structure is * passed to all HID Class driver functions, so that multiple instances of the same class * within a device can be differentiated from one another. This is for the mouse HID @@ -78,7 +78,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = .PrevReportINBuffer = PrevMouseHIDReportBuffer, .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), - }, + }, }; /** Main program entry point. This routine contains the overall program flow, including initial @@ -177,11 +177,11 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (HIDInterfaceInfo == &Keyboard_HID_Interface) { USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - + /* If first board button not being held down, no keyboard report */ if (!(ButtonStatus_LCL & BUTTONS_BUTTON1)) return 0; - + KeyboardReport->Modifier = HID_KEYBOARD_MODIFER_LEFTSHIFT; if (JoyStatus_LCL & JOY_UP) @@ -196,7 +196,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) KeyboardReport->KeyCode[0] = 0x08; // E - + *ReportSize = sizeof(USB_KeyboardReport_Data_t); return false; } @@ -207,7 +207,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn /* If first board button being held down, no mouse report */ if (ButtonStatus_LCL & BUTTONS_BUTTON1) return 0; - + if (JoyStatus_LCL & JOY_UP) MouseReport->Y = -1; else if (JoyStatus_LCL & JOY_DOWN) @@ -220,9 +220,9 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + *ReportSize = sizeof(USB_MouseReport_Data_t); - return true; + return true; } } @@ -247,13 +247,13 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK) LEDMask |= LEDS_LED4; - + LEDs_SetAllLEDs(LEDMask); } -}
\ No newline at end of file +} diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h index 5c385fd42..186602f63 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.h @@ -1,21 +1,21 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); @@ -76,9 +76,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); - + #endif + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt index f13087885..984493056 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/ClassDriver/KeyboardMouse/KeyboardMouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Dual HID Keyboard and Mouse Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,7 +44,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard/Mouse demonstration application. This gives a simple reference * application for implementing a composite device containing both USB Keyboard @@ -52,13 +52,13 @@ * (i.e. no special drivers required). This example uses two separate HID * interfaces for each function. It is boot protocol compatible, and thus works under * compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2). - * + * * On start-up the system will automatically enumerate and function * as a keyboard when the USB connection to a host is present and the HWB is not * pressed. When enabled, manipulate the joystick to send the letters * a, b, c, d and e. See the USB HID documentation for more information * on sending keyboard event and key presses. - * + * * When the HWB is pressed, the mouse mode is enabled. When enabled, move the * joystick to move the pointer, and push the joystick inwards to simulate a * left-button click. @@ -75,3 +75,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/KeyboardMouse/makefile b/Demos/Device/ClassDriver/KeyboardMouse/makefile index 8b2fb9d6e..8ef931962 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/makefile +++ b/Demos/Device/ClassDriver/KeyboardMouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.c b/Demos/Device/ClassDriver/MIDI/Descriptors.c index 98e6ae508..d6092bbd4 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.c +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2048, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,122 +80,122 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = sizeof(USB_Audio_Descriptor_Interface_AC_t), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_StreamInterface = + .Audio_StreamInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x01, .SubClass = 0x03, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_AudioInterface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, .AudioSpecification = VERSION_BCD(01.00), - + .TotalLength = (sizeof(USB_Descriptor_Configuration_t) - offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC)) }, - .MIDI_In_Jack_Emb = + .MIDI_In_Jack_Emb = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .JackType = MIDI_JACKTYPE_Embedded, .JackID = 0x01, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_In_Jack_Ext = + .MIDI_In_Jack_Ext = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_InputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .JackType = MIDI_JACKTYPE_External, .JackID = 0x02, - + .JackStrIndex = NO_DESCRIPTOR }, - - .MIDI_Out_Jack_Emb = + + .MIDI_Out_Jack_Emb = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .JackType = MIDI_JACKTYPE_Embedded, .JackID = 0x03, .NumberOfPins = 1, .SourceJackID = {0x02}, .SourcePinID = {0x01}, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_Out_Jack_Ext = + .MIDI_Out_Jack_Ext = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_OutputJack_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .JackType = MIDI_JACKTYPE_External, .JackID = 0x04, .NumberOfPins = 1, .SourceJackID = {0x01}, .SourcePinID = {0x01}, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_In_Jack_Endpoint = + .MIDI_In_Jack_Endpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -204,12 +204,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .MIDI_In_Jack_Endpoint_SPC = + + .MIDI_In_Jack_Endpoint_SPC = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, @@ -218,9 +218,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .AssociatedJackID = {0x01} }, - .MIDI_Out_Jack_Endpoint = + .MIDI_Out_Jack_Endpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -229,12 +229,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .MIDI_Out_Jack_Endpoint_SPC = + + .MIDI_Out_Jack_Endpoint_SPC = { .Header = {.Size = sizeof(USB_MIDI_Descriptor_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, @@ -251,7 +251,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -262,7 +262,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -273,7 +273,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(14), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA MIDI Demo" }; @@ -295,34 +295,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/MIDI/Descriptors.h b/Demos/Device/ClassDriver/MIDI/Descriptors.h index 52ba98f06..06020c8f9 100644 --- a/Demos/Device/ClassDriver/MIDI/Descriptors.h +++ b/Demos/Device/ClassDriver/MIDI/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -51,7 +51,7 @@ /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -73,7 +73,7 @@ USB_Audio_Descriptor_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint; USB_MIDI_Descriptor_Jack_Endpoint_t MIDI_Out_Jack_Endpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -81,3 +81,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.c b/Demos/Device/ClassDriver/MIDI/MIDI.c index bfeeaa38e..cae7277fd 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.c +++ b/Demos/Device/ClassDriver/MIDI/MIDI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -65,11 +65,11 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { CheckJoystickMovement(); - + MIDI_EventPacket_t ReceivedMIDIEvent; if (MIDI_Device_ReceiveEventPacket(&Keyboard_MIDI_Interface, &ReceivedMIDIEvent)) { @@ -78,7 +78,7 @@ int main(void) else LEDs_SetAllLEDs(LEDS_NO_LEDS); } - + MIDI_Device_USBTask(&Keyboard_MIDI_Interface); USB_USBTask(); } @@ -93,7 +93,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ Joystick_Init(); LEDs_Init(); @@ -108,11 +108,11 @@ void CheckJoystickMovement(void) uint8_t MIDICommand = 0; uint8_t MIDIPitch; - + /* Get current joystick mask, XOR with previous to detect joystick changes */ uint8_t JoystickStatus = Joystick_GetStatus(); uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus); - + /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1)); @@ -133,7 +133,7 @@ void CheckJoystickMovement(void) MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3E; } - + if (JoystickChanges & JOY_DOWN) { MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); @@ -145,19 +145,19 @@ void CheckJoystickMovement(void) MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3B; } - + if (MIDICommand) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { .CableNumber = 0, .Command = (MIDICommand >> 4), - + .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, - .Data3 = MIDI_STANDARD_VELOCITY, + .Data3 = MIDI_STANDARD_VELOCITY, }; - + MIDI_Device_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent); MIDI_Device_Flush(&Keyboard_MIDI_Interface); } @@ -192,3 +192,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { MIDI_Device_ProcessControlRequest(&Keyboard_MIDI_Interface); } + diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.h b/Demos/Device/ClassDriver/MIDI/MIDI.h index 6fd304e7a..c97311654 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.h +++ b/Demos/Device/ClassDriver/MIDI/MIDI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for AudioOutput.c. */ - + #ifndef _AUDIO_OUTPUT_H_ #define _AUDIO_OUTPUT_H_ @@ -45,7 +45,7 @@ #include <string.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Joystick.h> @@ -65,14 +65,15 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/ClassDriver/MIDI/MIDI.txt b/Demos/Device/ClassDriver/MIDI/MIDI.txt index e9522f2ed..0629832b2 100644 --- a/Demos/Device/ClassDriver/MIDI/MIDI.txt +++ b/Demos/Device/ClassDriver/MIDI/MIDI.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage MIDI Input Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * MIDI demonstration application. This gives a simple reference * application for implementing the USB-MIDI class in USB devices. * It is built upon the USB Audio class. - * + * * Joystick movements are translated into note on/off messages and * are sent to the host PC as MIDI streams which can be read by any * MIDI program supporting MIDI IN devices. - * + * * If the HWB is not pressed, channel 1 (default piano) is used. If * the HWB is set, then channel 10 (default percussion) is selected. - * + * * This device implements MIDI-THRU mode, with the IN MIDI data being * generated by the device itself. OUT MIDI data is discarded. * @@ -72,3 +72,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/MIDI/makefile b/Demos/Device/ClassDriver/MIDI/makefile index 9e748ddb4..c60aff97d 100644 --- a/Demos/Device/ClassDriver/MIDI/makefile +++ b/Demos/Device/ClassDriver/MIDI/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.c b/Demos/Device/ClassDriver/MassStorage/Descriptors.c index b6e03a359..d06161049 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2045, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,38 +83,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .MS_Interface = + + .MS_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x08, .SubClass = 0x06, .Protocol = 0x50, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .MS_DataInEndpoint = + .MS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -124,7 +124,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .MS_DataOutEndpoint = + .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -142,7 +142,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -153,7 +153,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -164,7 +164,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mass Storage Demo" }; @@ -186,34 +186,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/MassStorage/Descriptors.h b/Demos/Device/ClassDriver/MassStorage/Descriptors.h index 1b40df159..c816e2383 100644 --- a/Demos/Device/ClassDriver/MassStorage/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorage/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -44,15 +44,15 @@ /* Macros: */ /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + #define MASS_STORAGE_IN_EPNUM 3 /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + #define MASS_STORAGE_OUT_EPNUM 4 /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ + + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which * vary between devices, and which describe the device's usage to the host. @@ -64,7 +64,7 @@ USB_Descriptor_Endpoint_t MS_DataInEndpoint; USB_Descriptor_Endpoint_t MS_DataOutEndpoint; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -72,3 +72,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c index ce2ac8151..2c63f6098 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c +++ b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -77,7 +77,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -86,7 +86,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn { /* Clear the current endpoint bank */ Endpoint_ClearOUT(); - + /* Wait until the host has sent another packet */ if (Endpoint_WaitUntilReady()) return; @@ -125,7 +125,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Send the Dataflash buffer write command */ Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); + Dataflash_SendAddressBytes(0, 0); } /* Write one 16-byte chunk of data to the Dataflash */ @@ -145,7 +145,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; @@ -154,9 +154,9 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Check if the current command is being aborted by the host */ if (MSInterfaceInfo->State.IsMassStoreReset) - return; + return; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -201,15 +201,15 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - + /* Wait until endpoint is ready before continuing */ if (Endpoint_WaitUntilReady()) return; - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -218,12 +218,12 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf { /* Clear the endpoint bank to send its contents to the host */ Endpoint_ClearIN(); - + /* Wait until the endpoint is ready for more data */ if (Endpoint_WaitUntilReady()) return; } - + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { @@ -233,7 +233,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -241,7 +241,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ Endpoint_Write_Byte(Dataflash_ReceiveByte()); @@ -260,10 +260,10 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; @@ -271,11 +271,11 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf if (MSInterfaceInfo->State.IsMassStoreReset) return; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } - + /* If the endpoint is full, send its contents to the host */ if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearIN(); @@ -315,11 +315,11 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, /* Send the Dataflash buffer write command */ Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, CurrDFPageByte); - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -359,18 +359,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - + /* Write one 16-byte chunk of data to the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) Dataflash_SendByte(*(BufferPtr++)); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; + BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -416,7 +416,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -429,7 +429,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -437,19 +437,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) *(BufferPtr++) = Dataflash_ReceiveByte(); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } @@ -464,7 +464,7 @@ void DataflashManager_ResetDataflashProtections(void) /* Select first Dataflash chip, send the read status register command */ Dataflash_SelectChip(DATAFLASH_CHIP1); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -476,12 +476,12 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } - + /* Select second Dataflash chip (if present on selected board), send read status register command */ #if (DATAFLASH_TOTALCHIPS == 2) Dataflash_SelectChip(DATAFLASH_CHIP2); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -494,7 +494,7 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } #endif - + /* Deselect current Dataflash chip */ Dataflash_DeselectChip(); } @@ -528,6 +528,7 @@ bool DataflashManager_CheckDataflashOperation(void) if (ReturnByte != DF_MANUFACTURER_ATMEL) return false; #endif - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h index a7652bcad..d3949f23e 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/DataflashManager.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,13 +32,13 @@ * * Header file for DataflashManager.c. */ - + #ifndef _DATAFLASH_MANAGER_H_ #define _DATAFLASH_MANAGER_H_ /* Includes: */ #include <avr/io.h> - + #include "MassStorage.h" #include "Descriptors.h" @@ -60,12 +60,12 @@ * storage media (Dataflash) using a different native block size. Do not change this value. */ #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - + /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, @@ -81,5 +81,6 @@ uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); void DataflashManager_ResetDataflashProtections(void); bool DataflashManager_CheckDataflashOperation(void); - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c index fed57f7b9..8c31b2b80 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,29 +34,29 @@ * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, * which wrap around standard SCSI device commands for controlling the actual storage medium. */ - + #define INCLUDE_FROM_SCSI_C #include "SCSI.h" /** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's * features and capabilities. */ -SCSI_Inquiry_Response_t InquiryData = +SCSI_Inquiry_Response_t InquiryData = { .DeviceType = DEVICE_TYPE_BLOCK, .PeripheralQualifier = 0, - + .Removable = true, - + .Version = 0, - + .ResponseDataFormat = 2, .NormACA = false, .TrmTsk = false, .AERC = false, .AdditionalLength = 0x1F, - + .SoftReset = false, .CmdQue = false, .Linked = false, @@ -64,7 +64,7 @@ SCSI_Inquiry_Response_t InquiryData = .WideBus16Bit = false, .WideBus32Bit = false, .RelAddr = false, - + .VendorID = "LUFA", .ProductID = "Dataflash Disk", .RevisionID = {'0','.','0','0'}, @@ -96,13 +96,13 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) { case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); break; case SCSI_CMD_REQUEST_SENSE: CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); break; case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); break; case SCSI_CMD_SEND_DIAGNOSTIC: CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); @@ -134,7 +134,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, SCSI_ASENSEQ_NO_QUALIFIER); - + return true; } @@ -165,11 +165,11 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf return false; } - + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK); uint8_t PadBytes[AllocationLength - BytesTransferred]; - + /* Pad out remaining bytes with 0x00 */ Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK); @@ -178,7 +178,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - + return true; } @@ -193,7 +193,7 @@ static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterf { uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData); - + uint8_t PadBytes[AllocationLength - BytesTransferred]; Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK); @@ -221,10 +221,10 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK); Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK); Endpoint_ClearIN(); - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - + return true; } @@ -248,21 +248,21 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte return false; } - + /* Check to see if all attached Dataflash ICs are functional */ if (!(DataflashManager_CheckDataflashOperation())) { /* Update SENSE key with a hardware error condition and return command fail */ SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - + SCSI_ASENSEQ_NO_QUALIFIER); + return false; } - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - + return true; } @@ -280,13 +280,13 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa { uint32_t BlockAddress; uint16_t TotalBlocks; - + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - + /* Check if the block address is outside the maximum allowable value for the LUN */ if (BlockAddress >= LUN_MEDIA_BLOCKS) { @@ -302,7 +302,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Adjust the given block address to the real media address based on the selected LUN */ BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS); #endif - + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ if (IsDataRead == DATA_READ) DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); @@ -311,6 +311,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Update the bytes transferred counter and succeed the command */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h index bf3c13850..6c7071dcd 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for SCSI.c. */ - + #ifndef _SCSI_H_ #define _SCSI_H_ @@ -46,7 +46,7 @@ #include "MassStorage.h" #include "Descriptors.h" #include "DataflashManager.h" - + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about @@ -68,13 +68,13 @@ /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ #define DEVICE_TYPE_BLOCK 0x00 - + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ #define DEVICE_TYPE_CDROM 0x05 - + /* Function Prototypes: */ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - + #if defined(INCLUDE_FROM_SCSI_C) static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); @@ -83,5 +83,6 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); #endif - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.c b/Demos/Device/ClassDriver/MassStorage/MassStorage.c index 94f9f8415..993d5a5f9 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.c +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -130,10 +130,11 @@ void EVENT_USB_Device_UnhandledControlRequest(void) bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { bool CommandSuccess; - + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); LEDs_SetAllLEDs(LEDMASK_USB_READY); - + return CommandSuccess; } + diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/Demos/Device/ClassDriver/MassStorage/MassStorage.h index a9abd0edb..3e829e7b5 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.h +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -68,13 +68,13 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /** Total number of logical drives within the device - must be non-zero. */ #define TOTAL_LUNS 1 - + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - + /* Function Prototypes: */ void SetupHardware(void); @@ -86,3 +86,4 @@ bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); #endif + diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt index 934cb50aa..2b4c68235 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.txt +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mass Storage Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Mass Storage Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bulk-Only Transport</td> * </tr> @@ -45,23 +45,23 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Dual LUN Mass Storage demonstration application. This gives a simple * reference application for implementing a multiple LUN USB Mass Storage * device using the basic USB UFI drivers in all modern OSes (i.e. no * special drivers required). - * + * * On start-up the system will automatically enumerate and function as an * external mass storage device with two LUNs (separate disks) which may * be formatted and used in the same manner as commercial USB Mass Storage * devices. - * + * * You will need to format the mass storage drives upon first run of this * demonstration - as the device acts only as a data block transport between * the host and the storage media, it does not matter what file system is used, * as the data interpretation is performed by the host and not the USB device. - * + * * This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS * value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to * 255), with each LUN being allocated an equal portion of the available @@ -90,3 +90,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/MassStorage/makefile b/Demos/Device/ClassDriver/MassStorage/makefile index 8941b80db..54b4b7f17 100644 --- a/Demos/Device/ClassDriver/MassStorage/makefile +++ b/Demos/Device/ClassDriver/MassStorage/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -138,7 +138,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -151,7 +151,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -265,7 +265,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -278,7 +278,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -290,7 +290,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -302,7 +302,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -325,7 +325,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -359,7 +359,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -393,7 +393,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -422,7 +422,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -441,10 +441,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -509,11 +509,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -540,9 +540,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -640,14 +640,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -669,7 +669,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -713,3 +713,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c index 7be7bed92..0a42af7be 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,9 +31,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -100,22 +100,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2061, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -126,38 +126,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .MS_Interface = + + .MS_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x08, .SubClass = 0x06, .Protocol = 0x50, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .MS_DataInEndpoint = + .MS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .MS_DataOutEndpoint = + .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -177,34 +177,34 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .HID_KeyboardInterface = + .HID_KeyboardInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_KeyboardBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_KeyboardHID = - { + .HID_KeyboardHID = + { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = HID_DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID_ReportINEndpoint = + + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -222,7 +222,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -233,7 +233,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -244,7 +244,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(35), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mass Storage and Keyboard Demo" }; @@ -266,31 +266,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_KeyboardHID; @@ -301,7 +301,8 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = sizeof(KeyboardReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h index 678c8ec85..dd861e6b8 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -47,20 +47,20 @@ /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_EPNUM 1 - - /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ + + /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + #define MASS_STORAGE_IN_EPNUM 3 /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + #define MASS_STORAGE_OUT_EPNUM 4 /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ + + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which * vary between devices, and which describe the device's usage to the host. @@ -75,7 +75,7 @@ USB_HID_Descriptor_HID_t HID_KeyboardHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -83,3 +83,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c index ce2ac8151..2c63f6098 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -77,7 +77,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -86,7 +86,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn { /* Clear the current endpoint bank */ Endpoint_ClearOUT(); - + /* Wait until the host has sent another packet */ if (Endpoint_WaitUntilReady()) return; @@ -125,7 +125,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Send the Dataflash buffer write command */ Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); + Dataflash_SendAddressBytes(0, 0); } /* Write one 16-byte chunk of data to the Dataflash */ @@ -145,7 +145,7 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; @@ -154,9 +154,9 @@ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceIn /* Check if the current command is being aborted by the host */ if (MSInterfaceInfo->State.IsMassStoreReset) - return; + return; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -201,15 +201,15 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - + /* Wait until endpoint is ready before continuing */ if (Endpoint_WaitUntilReady()) return; - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -218,12 +218,12 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf { /* Clear the endpoint bank to send its contents to the host */ Endpoint_ClearIN(); - + /* Wait until the endpoint is ready for more data */ if (Endpoint_WaitUntilReady()) return; } - + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { @@ -233,7 +233,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -241,7 +241,7 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ Endpoint_Write_Byte(Dataflash_ReceiveByte()); @@ -260,10 +260,10 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; @@ -271,11 +271,11 @@ void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInf if (MSInterfaceInfo->State.IsMassStoreReset) return; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } - + /* If the endpoint is full, send its contents to the host */ if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearIN(); @@ -315,11 +315,11 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, /* Send the Dataflash buffer write command */ Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, CurrDFPageByte); - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -359,18 +359,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - + /* Write one 16-byte chunk of data to the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) Dataflash_SendByte(*(BufferPtr++)); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; + BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -416,7 +416,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -429,7 +429,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -437,19 +437,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) *(BufferPtr++) = Dataflash_ReceiveByte(); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } @@ -464,7 +464,7 @@ void DataflashManager_ResetDataflashProtections(void) /* Select first Dataflash chip, send the read status register command */ Dataflash_SelectChip(DATAFLASH_CHIP1); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -476,12 +476,12 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } - + /* Select second Dataflash chip (if present on selected board), send read status register command */ #if (DATAFLASH_TOTALCHIPS == 2) Dataflash_SelectChip(DATAFLASH_CHIP2); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -494,7 +494,7 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } #endif - + /* Deselect current Dataflash chip */ Dataflash_DeselectChip(); } @@ -528,6 +528,7 @@ bool DataflashManager_CheckDataflashOperation(void) if (ReturnByte != DF_MANUFACTURER_ATMEL) return false; #endif - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h index d5a9fd5b0..6ccc5dfe1 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,13 +32,13 @@ * * Header file for DataflashManager.c. */ - + #ifndef _DATAFLASH_MANAGER_H_ #define _DATAFLASH_MANAGER_H_ /* Includes: */ #include <avr/io.h> - + #include "MassStorageKeyboard.h" #include "Descriptors.h" @@ -59,16 +59,16 @@ * storage media (Dataflash) using a different native block size. */ #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - + /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - + /** Total number of logical drives within the device - must be non-zero. */ #define TOTAL_LUNS 1 - + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - + /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, @@ -84,5 +84,6 @@ uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); void DataflashManager_ResetDataflashProtections(void); bool DataflashManager_CheckDataflashOperation(void); - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c index fed57f7b9..8c31b2b80 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,29 +34,29 @@ * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, * which wrap around standard SCSI device commands for controlling the actual storage medium. */ - + #define INCLUDE_FROM_SCSI_C #include "SCSI.h" /** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's * features and capabilities. */ -SCSI_Inquiry_Response_t InquiryData = +SCSI_Inquiry_Response_t InquiryData = { .DeviceType = DEVICE_TYPE_BLOCK, .PeripheralQualifier = 0, - + .Removable = true, - + .Version = 0, - + .ResponseDataFormat = 2, .NormACA = false, .TrmTsk = false, .AERC = false, .AdditionalLength = 0x1F, - + .SoftReset = false, .CmdQue = false, .Linked = false, @@ -64,7 +64,7 @@ SCSI_Inquiry_Response_t InquiryData = .WideBus16Bit = false, .WideBus32Bit = false, .RelAddr = false, - + .VendorID = "LUFA", .ProductID = "Dataflash Disk", .RevisionID = {'0','.','0','0'}, @@ -96,13 +96,13 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) { case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); break; case SCSI_CMD_REQUEST_SENSE: CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); break; case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); break; case SCSI_CMD_SEND_DIAGNOSTIC: CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); @@ -134,7 +134,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, SCSI_ASENSEQ_NO_QUALIFIER); - + return true; } @@ -165,11 +165,11 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf return false; } - + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NO_STREAM_CALLBACK); uint8_t PadBytes[AllocationLength - BytesTransferred]; - + /* Pad out remaining bytes with 0x00 */ Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), NO_STREAM_CALLBACK); @@ -178,7 +178,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - + return true; } @@ -193,7 +193,7 @@ static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterf { uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData); - + uint8_t PadBytes[AllocationLength - BytesTransferred]; Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NO_STREAM_CALLBACK); @@ -221,10 +221,10 @@ static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInt Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NO_STREAM_CALLBACK); Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NO_STREAM_CALLBACK); Endpoint_ClearIN(); - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - + return true; } @@ -248,21 +248,21 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInte return false; } - + /* Check to see if all attached Dataflash ICs are functional */ if (!(DataflashManager_CheckDataflashOperation())) { /* Update SENSE key with a hardware error condition and return command fail */ SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - + SCSI_ASENSEQ_NO_QUALIFIER); + return false; } - + /* Succeed the command and update the bytes transferred counter */ MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - + return true; } @@ -280,13 +280,13 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa { uint32_t BlockAddress; uint16_t TotalBlocks; - + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - + /* Check if the block address is outside the maximum allowable value for the LUN */ if (BlockAddress >= LUN_MEDIA_BLOCKS) { @@ -302,7 +302,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Adjust the given block address to the real media address based on the selected LUN */ BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS); #endif - + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ if (IsDataRead == DATA_READ) DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); @@ -311,6 +311,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Update the bytes transferred counter and succeed the command */ MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - + return true; } + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h index f39134d35..b2dd70feb 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for SCSI.c. */ - + #ifndef _SCSI_H_ #define _SCSI_H_ @@ -46,7 +46,7 @@ #include "MassStorageKeyboard.h" #include "Descriptors.h" #include "DataflashManager.h" - + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about @@ -68,13 +68,13 @@ /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ #define DEVICE_TYPE_BLOCK 0x00 - + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ #define DEVICE_TYPE_CDROM 0x05 - + /* Function Prototypes: */ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - + #if defined(INCLUDE_FROM_SCSI_C) static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); @@ -83,5 +83,6 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); #endif - + #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c index e5dbfb675..e71bffa7a 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -36,7 +36,7 @@ */ #include "MassStorageKeyboard.h" - + /** LUFA Mass Storage Class driver interface configuration and state information. This structure is * passed to all Mass Storage Class driver functions, so that multiple instances of the same class * within a device can be differentiated from one another. @@ -160,11 +160,11 @@ void EVENT_USB_Device_UnhandledControlRequest(void) bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) { bool CommandSuccess; - + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); LEDs_SetAllLEDs(LEDMASK_USB_READY); - + return CommandSuccess; } @@ -191,7 +191,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_KeyboardReport_Data_t* KeyboardReport = (USB_KeyboardReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -209,10 +209,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) KeyboardReport->KeyCode[0] = 0x08; // E - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) KeyboardReport->KeyCode[0] = 0x09; // F - + *ReportSize = sizeof(USB_KeyboardReport_Data_t); return false; } @@ -236,13 +236,13 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI if (*LEDReport & HID_KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (*LEDReport & HID_KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; if (*LEDReport & HID_KEYBOARD_LED_SCROLLLOCK) LEDMask |= LEDS_LED4; - + LEDs_SetAllLEDs(LEDMask); } diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h index 482969b93..43e04d0b1 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -58,7 +58,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/MassStorage.h> #include <LUFA/Drivers/USB/Class/Device/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -74,7 +74,7 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Function Prototypes: */ void SetupHardware(void); @@ -92,9 +92,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt index 2a579c8c7..f93a5ff49 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Combined Mass Storage and Keyboard Device Demo * * \section SSec_Compat Demo Compatibility: @@ -29,7 +29,7 @@ * <td>Mass Storage Device \n * Human Interface Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclasses:</b></td> * <td>Bulk-Only Transport \n * Keyboard Subclass</td> @@ -49,24 +49,24 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Combined Mass Storage and Keyboard demonstration application. This gives a * simple reference application for implementing a dual class USB Mass Storage * and USB HID Keyboard device using the basic USB UFI and HID drivers in all * modern OSes (i.e. no special drivers required). - * + * * On start-up the system will automatically enumerate and function as an * external mass storage device (which may be formatted and used in the same * manner as commercial USB Mass Storage devices) and a USB keyboard. - * + * * You will need to format the mass storage drive upon first run of this * demonstration - as the device acts only as a data block transport between * the host and the storage media, it does not matter what file system is used, * as the data interpretation is performed by the host and not the USB device. * * Keys on the USB keyboard can be pressed by moving the board's Joystick. - * + * * The USB control endpoint is managed entirely by the library using endpoint * interrupts, as the INTERRUPT_CONTROL_ENDPOINT option is enabled. This allows for * the host to reset the Mass Storage device state during long transfers without @@ -90,3 +90,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile index 09c480620..bdc0a9b64 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/makefile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -138,7 +138,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -151,7 +151,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -265,7 +265,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -278,7 +278,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -290,7 +290,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -302,7 +302,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -325,7 +325,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -359,7 +359,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -393,7 +393,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -422,7 +422,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -441,10 +441,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -509,11 +509,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -540,9 +540,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -640,14 +640,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -669,7 +669,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -713,3 +713,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.c b/Demos/Device/ClassDriver/Mouse/Descriptors.c index 02066ba93..866ba272f 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.c +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2041, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,38 +107,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_MouseHID = + .HID_MouseHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, @@ -149,7 +149,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(MouseReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse Demo" }; @@ -235,19 +235,19 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_MouseHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &MouseReport; Size = sizeof(MouseReport); break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } diff --git a/Demos/Device/ClassDriver/Mouse/Descriptors.h b/Demos/Device/ClassDriver/Mouse/Descriptors.h index f482a6946..243c88d35 100644 --- a/Demos/Device/ClassDriver/Mouse/Descriptors.h +++ b/Demos/Device/ClassDriver/Mouse/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -54,11 +54,11 @@ USB_HID_Descriptor_HID_t HID_MouseHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPNUM 1 - + /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.c b/Demos/Device/ClassDriver/Mouse/Mouse.c index aabd96138..ac6a91259 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.c +++ b/Demos/Device/ClassDriver/Mouse/Mouse.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -62,9 +62,9 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = * setup of all components and the main program loop. */ int main(void) -{ +{ SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -145,7 +145,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -161,10 +161,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) MouseReport->Button |= (1 << 1); - + *ReportSize = sizeof(USB_MouseReport_Data_t); return true; } @@ -185,3 +185,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.h b/Demos/Device/ClassDriver/Mouse/Mouse.h index 48b129100..602783718 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.h +++ b/Demos/Device/ClassDriver/Mouse/Mouse.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,7 +44,7 @@ #include <avr/interrupt.h> #include <stdbool.h> #include <string.h> - + #include "Descriptors.h" #include <LUFA/Version.h> @@ -53,7 +53,7 @@ #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -66,7 +66,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); @@ -82,9 +82,10 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/Mouse/Mouse.txt b/Demos/Device/ClassDriver/Mouse/Mouse.txt index 36f566f57..8f299283a 100644 --- a/Demos/Device/ClassDriver/Mouse/Mouse.txt +++ b/Demos/Device/ClassDriver/Mouse/Mouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Mouse Subclass</td> * </tr> @@ -44,14 +44,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse demonstration application. This gives a simple reference * application for implementing a USB Mouse using the basic USB HID * drivers in all modern OSes (i.e. no special drivers required). It is * boot protocol compatible, and thus works under compatible BIOS as if * it was a native mouse (e.g. PS/2). - * + * * On start-up the system will automatically enumerate and function * as a mouse when the USB connection to a host is present. To use * the mouse, move the joystick to move the pointer, and push the @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/Mouse/makefile b/Demos/Device/ClassDriver/Mouse/makefile index 9fab31078..76e6d7dfc 100644 --- a/Demos/Device/ClassDriver/Mouse/makefile +++ b/Demos/Device/ClassDriver/Mouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c index 2eaa1eb5b..33f1dfe93 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x02, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204C, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,102 +71,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0xFF, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x00, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0x02 }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .RNDIS_DataOutEndpoint = + .RNDIS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .RNDIS_DataInEndpoint = + + .RNDIS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -181,7 +181,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -192,7 +192,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -203,7 +203,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA RNDIS CDC Demo" }; @@ -229,7 +229,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; @@ -249,10 +249,11 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h index 26bd57127..7f67bc09b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/RNDIS.h> - + #include <avr/pgmspace.h> /* Macros: */ @@ -47,10 +47,10 @@ #define CDC_NOTIFICATION_EPNUM 3 /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + #define CDC_TX_EPNUM 1 /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + #define CDC_RX_EPNUM 2 /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 @@ -83,3 +83,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c index 18da19cdb..fe6c5bef2 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * conversion of physical MAC addresses to protocol IP addresses between the host and the * device. */ - + #include "ARP.h" /** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response @@ -59,7 +59,7 @@ int16_t ARP_ProcessARPPacket(void* InDataStart, (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST)) { /* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */ - if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || + if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress)) { /* Fill out the ARP response header */ @@ -81,6 +81,7 @@ int16_t ARP_ProcessARPPacket(void* InDataStart, return sizeof(ARP_Header_t); } } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h index 8de76f3b6..d97761539 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ARP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,18 +32,18 @@ * * Header file for ARP.c. */ - + #ifndef _ARP_H_ #define _ARP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** ARP header operation constant, indicating a request from a host for an address translation. */ #define ARP_OPERATION_REQUEST 1 @@ -57,19 +57,20 @@ { uint16_t HardwareType; /**< Hardware type constant, indicating the hardware used */ uint16_t ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */ - + uint8_t HLEN; /**< Length in bytes of the source/destination hardware addresses */ uint8_t PLEN; /**< Length in bytes of the source/destination protocol addresses */ uint16_t Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */ - + MAC_Address_t SHA; /**< Sender's hardware address */ IP_Address_t SPA; /**< Sender's protocol address */ MAC_Address_t THA; /**< Target's hardware address */ IP_Address_t TPA; /**< Target's protocol address */ } ARP_Header_t; - + /* Function Prototypes: */ int16_t ARP_ProcessARPPacket(void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c index f694f2c81..18ad6a5e9 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * handles the automatic IP negotiation to the host, so that the host will use the provided * IP address given to it by the device. */ - + #include "DHCP.h" /** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response @@ -53,7 +53,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, IP_Header_t* IPHeaderIN = (IP_Header_t*)IPHeaderInStart; DHCP_Header_t* DHCPHeaderIN = (DHCP_Header_t*)DHCPHeaderInStart; DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart; - + uint8_t* DHCPOptionsINStart = (uint8_t*)(DHCPHeaderInStart + sizeof(DHCP_Header_t)); uint8_t* DHCPOptionsOUTStart = (uint8_t*)(DHCPHeaderOutStart + sizeof(DHCP_Header_t)); @@ -73,7 +73,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, DHCPHeaderOUT->YourIP = ClientIPAddress; memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t)); DHCPHeaderOUT->Cookie = SwapEndian_32(DHCP_MAGIC_COOKIE); - + /* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */ IPHeaderIN->SourceAddress = ClientIPAddress; @@ -81,7 +81,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, /* Process the incoming DHCP packet options */ while (DHCPOptionsINStart[0] != DHCP_OPTION_END) - { + { /* Find the Message Type DHCP option, to determine the type of DHCP packet */ if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE) { @@ -107,14 +107,15 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, DHCPOptionsOUTStart += sizeof(IP_Address_t); *(DHCPOptionsOUTStart++) = DHCP_OPTION_END; - + return (sizeof(DHCP_Header_t) + 12 + sizeof(IP_Address_t)); } } - + /* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */ DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2)); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h index 3bfdb29be..a4dc00dbb 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/DHCP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,14 +32,14 @@ * * Header file for DHCP.c. */ - + #ifndef _DHCP_H_ #define _DHCP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" @@ -50,13 +50,13 @@ /** DHCP operation constant, indicating a reply from a DHCP server to a host. */ #define DHCP_OP_BOOTREPLY 0x02 - + /** Hardware type constant, indicating Ethernet as a carrier. */ #define DHCP_HTYPE_ETHERNET 0x01 - + /** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */ #define DHCP_MAGIC_COOKIE 0x63825363 - + /** DHCP option list entry header, indicating that a subnet mask will follow. */ #define DHCP_OPTION_SUBNETMASK 1 @@ -71,7 +71,7 @@ /** DHCP option list entry header, indicating the end of option data. */ #define DHCP_OPTION_END 255 - + /** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */ #define DHCP_MESSAGETYPE_DISCOVER 1 @@ -106,16 +106,16 @@ uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */ uint16_t Flags; /**< BOOTP packet flags */ - + IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */ IP_Address_t YourIP; /**< Client IP address */ IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */ IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */ - + uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */ uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */ uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */ - + uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */ } DHCP_Header_t; @@ -125,3 +125,4 @@ void* DHCPHeaderOutStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c index 899b81f7e..687efe0c1 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * frames sent and received, deferring the processing of sub-packet protocols to the appropriate * protocol handlers, such as DHCP or ARP. */ - + #include "Ethernet.h" /** Constant for convenience when checking against or setting a MAC address to the virtual server MAC address. */ @@ -64,9 +64,9 @@ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, /* Cast the incoming Ethernet frame to the Ethernet header type */ Ethernet_Frame_Header_t* FrameINHeader = (Ethernet_Frame_Header_t*)&FrameIN->FrameData; Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT->FrameData; - + int16_t RetSize = NO_RESPONSE; - + /* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */ if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) || MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) && @@ -78,14 +78,14 @@ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, case ETHERTYPE_ARP: RetSize = ARP_ProcessARPPacket(&FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)], &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]); - break; + break; case ETHERTYPE_IPV4: RetSize = IP_ProcessIPPacket(FrameIN, &FrameIN->FrameData[sizeof(Ethernet_Frame_Header_t)], &FrameOUT->FrameData[sizeof(Ethernet_Frame_Header_t)]); break; } - + /* Protocol processing routine has filled a response, complete the ethernet frame header */ if (RetSize > 0) { @@ -93,7 +93,7 @@ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, FrameOUTHeader->Source = ServerMACAddress; FrameOUTHeader->Destination = FrameINHeader->Source; FrameOUTHeader->EtherType = FrameINHeader->EtherType; - + /* Set the response length in the buffer and indicate that a response is ready to be sent */ FrameOUT->FrameLength = (sizeof(Ethernet_Frame_Header_t) + RetSize); FrameOUT->FrameInBuffer = true; @@ -124,9 +124,10 @@ uint16_t Ethernet_Checksum16(void* Data, for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++) Checksum += Words[CurrWord]; - + while (Checksum & 0xFFFF0000) Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); - + return ~Checksum; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h index 233f48d1b..cd2cd8b4d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Ethernet.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,14 +32,14 @@ * * Header file for Ethernet.c. */ - + #ifndef _ETHERNET_H_ #define _ETHERNET_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include <LUFA/Drivers/USB/Class/RNDIS.h> #include "EthernetProtocols.h" @@ -50,31 +50,31 @@ #include "DHCP.h" #include "ARP.h" #include "IP.h" - + /* Macros: */ /** Physical MAC address of the USB RNDIS network adapter. */ #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} /** Physical MAC address of the virtual server on the network. */ - #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} + #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} /** Physical MAC address of the network broadcast address. */ #define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} - + /** Performs a comparison between two MAC addresses, indicating if they are identical. - * + * * \param[in] MAC1 First MAC address * \param[in] MAC2 Second MAC address * * \return True if the addresses match, false otherwise */ #define MAC_COMPARE(MAC1, MAC2) (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0) - + /** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */ #define ETHERNET_VER2_MINSIZE 0x0600 /** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */ - #define NO_RESPONSE 0 + #define NO_RESPONSE 0 /** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */ #define NO_PROCESS -1 @@ -87,18 +87,19 @@ MAC_Address_t Source; /**< Physics MAC address of the packet source */ uint16_t EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */ } Ethernet_Frame_Header_t; - + /* External Variables: */ extern const MAC_Address_t ServerMACAddress; extern const IP_Address_t ServerIPAddress; extern const MAC_Address_t BroadcastMACAddress; extern const IP_Address_t BroadcastIPAddress; extern const IP_Address_t ClientIPAddress; - + /* Function Prototypes: */ void Ethernet_ProcessPacket(Ethernet_Frame_Info_t* const FrameIN, Ethernet_Frame_Info_t* const FrameOUT); uint16_t Ethernet_Checksum16(void* Data, uint16_t Bytes); - + #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h index d5c93c695..2b0a71d01 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/EthernetProtocols.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -63,7 +63,7 @@ #define ETHERTYPE_FIBRECHANNEL 0x8906 #define ETHERTYPE_QINQ 0x9100 #define ETHERTYPE_VLLT 0xCAFE - + #define PROTOCOL_ICMP 1 #define PROTOCOL_IGMP 2 #define PROTOCOL_TCP 6 @@ -71,7 +71,7 @@ #define PROTOCOL_OSPF 89 #define PROTOCOL_SCTP 132 - /* Type Defines: */ + /* Type Defines: */ /** Type define for a protocol IP address of a device on a network. */ typedef struct { @@ -79,3 +79,4 @@ } IP_Address_t; #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c index fec74b37b..11a09afb9 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * Echo requests from the host, to indicate a successful network connection between the host * and the virtual server. */ - + #include "ICMP.h" /** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response @@ -64,9 +64,9 @@ int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, ICMPHeaderOUT->Checksum = 0; ICMPHeaderOUT->Id = ICMPHeaderIN->Id; ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence; - + intptr_t DataSize = FrameIN->FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN->FrameData)); - + /* Copy the remaining payload to the response - echo requests should echo back any sent data */ memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)], &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)], @@ -77,6 +77,7 @@ int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, /* Return the size of the response so far */ return (DataSize + sizeof(ICMP_Header_t)); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h index 9982560b1..26cd7cd1c 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ICMP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,18 +39,18 @@ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** ICMP message type constant, indicating an ICMP ECHO Reply message. */ #define ICMP_TYPE_ECHOREPLY 0 /** ICMP message type constant, indicating a packet destination is unreachable. */ #define ICMP_TYPE_DESTINATIONUNREACHABLE 3 - + /** ICMP message type constant, indicating an ICMP Source Quench message. */ #define ICMP_TYPE_SOURCEQUENCH 4 @@ -62,7 +62,7 @@ /** ICMP message type constant, indicating an ICMP Time Exceeded message. */ #define ICMP_TYPE_TIMEEXCEEDED 11 - + /* Type Defines: */ /** Type define for an ICMP message header. */ typedef struct @@ -73,10 +73,11 @@ uint16_t Id; /**< Id of the ICMP message */ uint16_t Sequence; /**< Sequence number of the ICMP message, to link together message responses */ } ICMP_Header_t; - + /* Function Prototypes: */ int16_t ICMP_ProcessICMPPacket(Ethernet_Frame_Info_t* const FrameIN, void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c index 6f49eac88..5a2285c6d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the * host which typically encapsulate other protocols such as ICMP, UDP and TCP. */ - + #include "IP.h" /** Processes an IP packet inside an Ethernet frame, and writes the appropriate response @@ -67,7 +67,7 @@ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, { return NO_RESPONSE; } - + /* Pass off the IP payload to the appropriate protocol processing routine */ switch (IPHeaderIN->Protocol) { @@ -79,15 +79,15 @@ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, case PROTOCOL_TCP: RetSize = TCP_ProcessTCPPacket(InDataStart, &((uint8_t*)InDataStart)[HeaderLengthBytes], - &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); break; case PROTOCOL_UDP: RetSize = UDP_ProcessUDPPacket(InDataStart, &((uint8_t*)InDataStart)[HeaderLengthBytes], - &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); break; } - + /* Check to see if the protocol processing routine has filled out a response */ if (RetSize > 0) { @@ -104,12 +104,13 @@ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, IPHeaderOUT->TTL = DEFAULT_TTL; IPHeaderOUT->SourceAddress = IPHeaderIN->DestinationAddress; IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress; - + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); - + /* Return the size of the response so far */ return (sizeof(IP_Header_t) + RetSize); } - + return RetSize; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h index 215695756..da9dc1549 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/IP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,18 +32,18 @@ * * Header file for IP.c. */ - + #ifndef _IP_H_ #define _IP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** Protocol IP address of the host (client) machine, once assigned by DHCP. */ #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} @@ -58,16 +58,16 @@ * is reached. */ #define DEFAULT_TTL 128 - + /** Performs a comparison between two IP addresses, indicating if they are identical. - * + * * \param[in] IP1 First IP address * \param[in] IP2 Second IP address * * \return True if the addresses match, false otherwise */ #define IP_COMPARE(IP1, IP2) (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0) - + /* Type Defines: */ /** Type define of an IP packet header. */ typedef struct @@ -84,14 +84,15 @@ uint8_t TTL; /**< Maximum allowable number of hops to reach the packet destination */ uint8_t Protocol; /**< Encapsulated protocol type */ uint16_t HeaderChecksum; /**< Ethernet checksum of the IP header */ - + IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */ IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */ } IP_Header_t; - + /* Function Prototypes: */ int16_t IP_ProcessIPPacket(Ethernet_Frame_Info_t* const FrameIN, void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c index 676bf7a94..99e3ab46b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,7 +31,7 @@ /* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines accepts a header to the appropriate protocol and prints out pertinent information on the packet through the serial port. - + To disable printing of a specific protocol, define the token NO_DECODE_{Protocol} in the project makefile, and pass it to the compiler using the -D switch. */ @@ -46,7 +46,7 @@ * Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile * and passing it to the compiler via the -D switch. */ - + #include "ProtocolDecoders.h" /** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format. @@ -57,9 +57,9 @@ void DecodeEthernetFrameHeader(Ethernet_Frame_Info_t* const FrameINData) { #if !defined(NO_DECODE_ETHERNET) Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)FrameINData->FrameData; - + printf_P(PSTR("\r\n")); - + printf_P(PSTR(" ETHERNET\r\n")); printf_P(PSTR(" + Frame Size: %u\r\n"), FrameINData->FrameLength); @@ -98,7 +98,7 @@ void DecodeEthernetFrameHeader(Ethernet_Frame_Info_t* const FrameINData) void DecodeARPHeader(void* InDataStart) { #if !defined(NO_DECODE_ARP) - ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; + ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; printf_P(PSTR(" \\\r\n ARP\r\n")); @@ -106,12 +106,12 @@ void DecodeARPHeader(void* InDataStart) !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress))) { printf_P(PSTR(" + NOT ADDRESSED TO DEVICE\r\n")); - return; + return; } printf_P(PSTR(" + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType)); printf_P(PSTR(" + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation)); - + if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4) { printf_P(PSTR(" + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0], @@ -163,14 +163,14 @@ void DecodeIPHeader(void* InDataStart) printf_P(PSTR(" + Header Length: %u Bytes\r\n"), HeaderLengthBytes); printf_P(PSTR(" + Packet Version: %u\r\n"), IPHeader->Version); printf_P(PSTR(" + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength)); - + printf_P(PSTR(" + Protocol: %u\r\n"), IPHeader->Protocol); printf_P(PSTR(" + TTL: %u\r\n"), IPHeader->TTL); - + printf_P(PSTR(" + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0], IPHeader->SourceAddress.Octets[1], IPHeader->SourceAddress.Octets[2], - IPHeader->SourceAddress.Octets[3]); + IPHeader->SourceAddress.Octets[3]); printf_P(PSTR(" + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0], IPHeader->DestinationAddress.Octets[1], @@ -215,9 +215,9 @@ void DecodeTCPHeader(void* InDataStart) printf_P(PSTR(" + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber)); printf_P(PSTR(" + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber)); - + printf_P(PSTR(" + Flags: 0x%02X\r\n"), TCPHeader->Flags); - + if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed) printf_P(PSTR(" + NOT LISTENING ON DESTINATION PORT\r\n")); #endif @@ -272,9 +272,10 @@ void DecodeDHCPHeader(void* InDataStart) break; } } - + DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2)); } #endif } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h index c1d3b395d..572fdeb82 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/ProtocolDecoders.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -40,13 +40,13 @@ #include <avr/io.h> #include <avr/pgmspace.h> #include <stdio.h> - + #include <LUFA/Drivers/USB/Class/RNDIS.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" - + /* Function Prototypes: */ void DecodeEthernetFrameHeader(Ethernet_Frame_Info_t* const FrameINData); void DecodeARPHeader(void* InDataStart); @@ -57,3 +57,4 @@ void DecodeDHCPHeader(void* InDataStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c index 5889c45b3..dda9883ea 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data * delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols. */ - + #define INCLUDE_FROM_TCP_C #include "TCP.h" @@ -64,7 +64,7 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) { /* Run the application handler for the port */ - if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && + if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && (PortStateTable[PTableEntry].State == TCP_Port_Open)) { PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry], @@ -72,14 +72,14 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) } } } - + /* Get pointer to the output frame info struct for convenience */ Ethernet_Frame_Info_t* FrameOUT = &RNDISInterfaceInfo->State.FrameOUT; - + /* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */ if (FrameOUT->FrameInBuffer) return; - + /* Send response packets from each application as the TCP packet buffers are filled by the applications */ for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) { @@ -111,7 +111,7 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) TCPHeaderOUT->Reserved = 0; memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize); - + ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize; TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, ServerIPAddress, @@ -133,11 +133,11 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) IPHeaderOUT->TTL = DEFAULT_TTL; IPHeaderOUT->SourceAddress = ServerIPAddress; IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress; - + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); - + PacketSize += sizeof(IP_Header_t); - + /* Fill out the response Ethernet frame header */ FrameOUTHeader->Source = ServerMACAddress; FrameOUTHeader->Destination = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}; @@ -148,9 +148,9 @@ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) /* Set the response length in the buffer and indicate that a response is ready to be sent */ FrameOUT->FrameLength = PacketSize; FrameOUT->FrameInBuffer = true; - + ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false; - + break; } } @@ -210,7 +210,7 @@ bool TCP_SetPortState(const uint16_t Port, return true; } } - + /* Port not in table and no room to add it, return failure */ return false; } @@ -237,7 +237,7 @@ uint8_t TCP_GetPortState(const uint16_t Port) if (PortStateTable[PTableEntry].Port == Port) return PortStateTable[PTableEntry].State; } - + /* Port not in table, assume closed */ return TCP_Port_Closed; } @@ -270,20 +270,20 @@ bool TCP_SetConnectionState(const uint16_t Port, return true; } } - + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) { /* Find empty entry in the table */ if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed) { ConnectionStateTable[CSTableEntry].Port = Port; - ConnectionStateTable[CSTableEntry].RemoteAddress = RemoteAddress; + ConnectionStateTable[CSTableEntry].RemoteAddress = RemoteAddress; ConnectionStateTable[CSTableEntry].RemotePort = RemotePort; ConnectionStateTable[CSTableEntry].State = State; return true; } } - + return false; } @@ -307,12 +307,12 @@ uint8_t TCP_GetConnectionState(const uint16_t Port, if ((ConnectionStateTable[CSTableEntry].Port == Port) && IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, &RemoteAddress) && ConnectionStateTable[CSTableEntry].RemotePort == RemotePort) - + { return ConnectionStateTable[CSTableEntry].State; } } - + return TCP_Connection_Closed; } @@ -340,7 +340,7 @@ TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port, return &ConnectionStateTable[CSTableEntry].Info; } } - + return NULL; } @@ -364,11 +364,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart; TCP_ConnectionInfo_t* ConnectionInfo; - + DecodeTCPHeader(TCPHeaderInStart); bool PacketResponse = false; - + /* Check if the destination port is open and allows incoming connections */ if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open) { @@ -382,8 +382,8 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed)) { - TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); - PacketResponse = true; + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + PacketResponse = true; } } else @@ -398,7 +398,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived)) { - TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); + TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); @@ -410,10 +410,10 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, { TCPHeaderOUT->Flags = TCP_FLAG_RST; } - + PacketResponse = true; } - + break; case TCP_Connection_SYNReceived: if (TCPHeaderIN->Flags == TCP_FLAG_ACK) @@ -425,19 +425,19 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); - + ConnectionInfo->SequenceNumberOut++; } - + break; case TCP_Connection_Established: if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) { /* FIN ACK when connected to a peer starts the finalization process */ - - TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); + + TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); PacketResponse = true; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_CloseWait); @@ -452,14 +452,14 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); - /* Check if the buffer is currently in use either by a buffered data to send, or receive */ + /* Check if the buffer is currently in use either by a buffered data to send, or receive */ if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false)) - { + { ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN; ConnectionInfo->Buffer.InUse = true; ConnectionInfo->Buffer.Length = 0; } - + /* Check if the buffer has been claimed by us to read in data from the peer */ if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) && (ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE)) @@ -475,7 +475,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn += DataLength; ConnectionInfo->Buffer.Length += DataLength; - + /* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */ if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH)) { @@ -492,7 +492,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, return NO_PROCESS; } } - + break; case TCP_Connection_Closing: ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, @@ -500,9 +500,9 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN); PacketResponse = true; - + ConnectionInfo->Buffer.InUse = false; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_FINWait1); @@ -518,7 +518,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn++; ConnectionInfo->SequenceNumberOut++; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } @@ -527,7 +527,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_FINWait2); } - + break; case TCP_Connection_FINWait2: if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) @@ -540,11 +540,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn++; ConnectionInfo->SequenceNumberOut++; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } - + break; case TCP_Connection_CloseWait: if (TCPHeaderIN->Flags == TCP_FLAG_ACK) @@ -552,7 +552,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } - + break; } } @@ -560,10 +560,10 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, else { /* Port is not open, indicate via a RST/ACK response to the sender */ - TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); PacketResponse = true; } - + /* Check if we need to respond to the sent packet */ if (PacketResponse) { @@ -575,7 +575,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->SequenceNumber = SwapEndian_32(ConnectionInfo->SequenceNumberOut); TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn); TCPHeaderOUT->DataOffset = (sizeof(TCP_Header_t) / sizeof(uint32_t)); - + if (!(ConnectionInfo->Buffer.InUse)) TCPHeaderOUT->WindowSize = SwapEndian_16(TCP_WINDOW_SIZE); else @@ -584,11 +584,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->UrgentPointer = 0; TCPHeaderOUT->Checksum = 0; TCPHeaderOUT->Reserved = 0; - + TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, IPHeaderIN->DestinationAddress, - IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); + IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); - return sizeof(TCP_Header_t); + return sizeof(TCP_Header_t); } return NO_RESPONSE; @@ -610,10 +610,10 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, const uint16_t TCPOutSize) { uint32_t Checksum = 0; - + /* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header, complimented */ - + Checksum += ((uint16_t*)&SourceAddress)[0]; Checksum += ((uint16_t*)&SourceAddress)[1]; Checksum += ((uint16_t*)&DestinationAddress)[0]; @@ -623,12 +623,13 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++) Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord]; - + if (TCPOutSize & 0x01) Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF); - + while (Checksum & 0xFFFF0000) Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); - + return ~Checksum; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h index d412647eb..721657e4a 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/TCP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,11 +39,11 @@ /* Includes: */ #include <avr/io.h> #include <stdbool.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** Maximum number of TCP ports which can be open at the one time. */ #define MAX_OPEN_TCP_PORTS 1 @@ -53,16 +53,16 @@ /** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */ #define TCP_WINDOW_SIZE 512 - + /** Port number for HTTP transmissions. */ #define TCP_PORT_HTTP SwapEndian_16(80) - + /** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */ #define TCP_PACKETDIR_IN false /** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */ #define TCP_PACKETDIR_OUT true - + /** Congestion Window Reduced TCP flag mask. */ #define TCP_FLAG_CWR (1 << 7) @@ -86,7 +86,7 @@ /** Connection Finalize TCP flag mask. */ #define TCP_FLAG_FIN (1 << 0) - + /** Application macro: Determines if the given application buffer contains a packet received from the host * * \param[in] Buffer Application buffer to check @@ -138,7 +138,7 @@ * \param[in] Buffer Application buffer to clear */ #define TCP_APP_CLEAR_BUFFER(Buffer) MACROS{ Buffer->Ready = false; Buffer->Length = 0; }MACROE - + /** Application macro: Closes an open connection to a host. * * \param[in] Connection Open TCP connection to close @@ -152,7 +152,7 @@ TCP_Port_Closed = 0, /**< TCP port closed, no connections to a host may be made on this port. */ TCP_Port_Open = 1, /**< TCP port open, connections to a host may be made on this port. */ }; - + /** Enum for possible TCP connection states. */ enum TCP_ConnectionStates_t { @@ -166,9 +166,9 @@ TCP_Connection_Closing = 7, /**< Unused */ TCP_Connection_LastACK = 8, /**< Unused */ TCP_Connection_TimeWait = 9, /**< Unused */ - TCP_Connection_Closed = 10, /**< Connection closed in both directions */ + TCP_Connection_Closed = 10, /**< Connection closed in both directions */ }; - + /* Type Defines: */ /** Type define for a TCP connection buffer structure, including size, data and direction. */ typedef struct @@ -185,7 +185,7 @@ /** Type define for a TCP connection information structure. */ typedef struct { - uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ + uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ uint32_t SequenceNumberOut; /**< Current TCP sequence number for device-to-host */ TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */ } TCP_ConnectionInfo_t; @@ -214,19 +214,19 @@ { uint16_t SourcePort; /**< Source port of the TCP packet */ uint16_t DestinationPort; /**< Destination port of the TCP packet */ - + uint32_t SequenceNumber; /**< Data sequence number of the packet */ uint32_t AcknowledgmentNumber; /**< Data acknowledgment number of the packet */ - + unsigned char Reserved : 4; /**< Reserved, must be all 0 */ unsigned char DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */ uint8_t Flags; /**< TCP packet flags */ uint16_t WindowSize; /**< Current data window size (bytes remaining in reception buffer) */ - + uint16_t Checksum; /**< TCP checksum */ uint16_t UrgentPointer; /**< Urgent data pointer */ } TCP_Header_t; - + /* Function Prototypes: */ void TCP_TCPTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo); void TCP_Init(void); @@ -256,3 +256,4 @@ #endif #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c index 15b065656..9637bebcb 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low * reliability packets which are typically used to encapsulate streaming data. */ - + #define INCLUDE_FROM_UDP_C #include "UDP.h" @@ -52,11 +52,11 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, { UDP_Header_t* UDPHeaderIN = (UDP_Header_t*)UDPHeaderInStart; UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart; - + int16_t RetSize = NO_RESPONSE; - + DecodeUDPHeader(UDPHeaderInStart); - + switch (SwapEndian_16(UDPHeaderIN->DestinationPort)) { case UDP_PORT_DHCP_REQUEST: @@ -65,7 +65,7 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]); break; } - + /* Check to see if the protocol processing routine has filled out a response */ if (RetSize > 0) { @@ -78,6 +78,7 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, /* Return the size of the response so far */ return (sizeof(UDP_Header_t) + RetSize); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h index 57abd0dc7..425bbe30d 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/UDP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,12 +38,12 @@ /* Includes: */ #include <avr/io.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" #include "DHCP.h" - + /* Macros: */ /** Source UDP port for a DHCP request. */ #define UDP_PORT_DHCP_REQUEST 67 @@ -60,10 +60,11 @@ uint16_t Length; /**< Total packet length, in bytes */ uint16_t Checksum; /**< Optional UDP packet checksum */ } UDP_Header_t; - + /* Function Prototypes: */ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, void* UDPHeaderInStart, void* UDPHeaderOutStart); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c index 4fab86cfb..08ab0687b 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -54,7 +54,7 @@ char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n" /** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically * broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run. */ -char PROGMEM HTTPPage[] = +char PROGMEM HTTPPage[] = "<html>" " <head>" " <title>" @@ -108,7 +108,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { char* BufferDataStr = (char*)Buffer->Data; static uint8_t PageBlock = 0; - + /* Check to see if a packet has been received on the HTTP port from a remote host */ if (TCP_APP_HAS_RECEIVED_PACKET(Buffer)) { @@ -120,7 +120,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, /* Copy the HTTP 200 response header into the packet buffer */ strcpy_P(BufferDataStr, HTTP200Header); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); @@ -131,10 +131,10 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Copy the HTTP 404 response header into the packet buffer */ strcpy_P(BufferDataStr, HTTP404Header); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -155,9 +155,9 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, strcpy_P(BufferDataStr, HTTP404Header); /* Send the buffer contents to the host */ - TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); } - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -165,7 +165,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Echo the host's query back to the host */ TCP_APP_SEND_BUFFER(Buffer, Buffer->Length); - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -179,13 +179,13 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]); uint16_t Length; - + /* Determine the length of the loaded block */ Length = ((RemLength > HTTP_REPLY_BLOCK_SIZE) ? HTTP_REPLY_BLOCK_SIZE : RemLength); /* Copy the next buffer sized block of the page to the packet buffer */ strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, Length); @@ -194,9 +194,10 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Unlock the buffer so that the host can fill it with future packets */ TCP_APP_RELEASE_BUFFER(Buffer); - + /* Close the connection to the host */ TCP_APP_CLOSECONNECTION(ConnectionState); } } } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h index 87fe1c91d..7abd6adc9 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/Lib/Webserver.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,25 +32,26 @@ * * Header file for Webserver.c. */ - + #ifndef _WEBSERVER_H_ #define _WEBSERVER_H_ /* Includes: */ #include <avr/io.h> #include <avr/pgmspace.h> - + #include <LUFA/Version.h> - + #include "TCP.h" - + /* Macros: */ /** Maximum size of a HTTP response per transmission */ #define HTTP_REPLY_BLOCK_SIZE 128 - + /* Function Prototypes: */ void Webserver_Init(void); void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, TCP_ConnectionBuffer_t* const Buffer); #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c index d332b206a..1dbd7db5a 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -57,7 +57,7 @@ USB_ClassInfo_RNDIS_Device_t Ethernet_RNDIS_Interface = .NotificationEndpointNumber = CDC_NOTIFICATION_EPNUM, .NotificationEndpointSize = CDC_NOTIFICATION_EPSIZE, .NotificationEndpointDoubleBank = false, - + .AdapterVendorDescription = "LUFA RNDIS Demo Adapter", .AdapterMACAddress = {ADAPTER_MAC_ADDRESS}, }, @@ -135,3 +135,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { RNDIS_Device_ProcessControlRequest(&Ethernet_RNDIS_Interface); } + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h index a689ee819..2cbdb3104 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for RNDISEthernet.c. */ - + #ifndef _RNDISETHERNET_H_ #define _RNDISETHERNET_H_ @@ -71,7 +71,7 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Function Prototypes: */ void SetupHardware(void); @@ -79,5 +79,6 @@ void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt index f9cd651d0..906ea0101 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet) * * \section SSec_Compat Demo Compatibility: @@ -26,7 +26,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> @@ -40,7 +40,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Remote Network Driver Interface demonstration application. * This gives a simple reference application for implementing @@ -49,7 +49,7 @@ * standard; this demo will only work on Windows 2000 (manually * patched with the Microsoft RNDIS hotfix) and above (with no * manual patches), or on the latest Linux kernels. - * + * * Before running, you will need to install the INF file that * is located in the RNDISEthernet project directory. This will * enable Windows to use its inbuilt RNDIS drivers, negating the @@ -58,7 +58,7 @@ * Windows 2000 is used, the Microsoft INF file in the hotfix * will need to be altered to use the VID/PID of the demo and * then chosen instead of the LUFA RNDIS INF file when prompted. - * + * * When enumerated, this demo will install as a new network * adapter which ethernet packets can be sent to and received * from. Running on top of the adapter is a very simple TCP/IP @@ -66,10 +66,10 @@ * accessed through a web browser at IP address 10.0.0.2:80 or * through a TELNET client at 10.0.0.2:25. This device also supports * ping echos via the ICMP protocol. - * + * * \note The TCP/IP stack in this demo has a number of limitations * and should serve as an example only - it is not fully featured nor - * compliant to the TCP/IP specification. For complete projects, it is + * compliant to the TCP/IP specification. For complete projects, it is * recommended that it be replaced with an external open source TCP/IP * stack that is feature complete, such as the uIP stack. * @@ -120,3 +120,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/RNDISEthernet/makefile b/Demos/Device/ClassDriver/RNDISEthernet/makefile index 2d0a6ef40..2d3e5d541 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/makefile +++ b/Demos/Device/ClassDriver/RNDISEthernet/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -154,7 +154,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -167,7 +167,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -281,7 +281,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -294,7 +294,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -306,7 +306,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -318,7 +318,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -341,7 +341,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -375,7 +375,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -409,7 +409,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -438,7 +438,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -457,10 +457,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -525,11 +525,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -556,9 +556,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -656,14 +656,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -685,7 +685,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -728,4 +728,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) .PHONY : all begin finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ -debug gdb-config
\ No newline at end of file +debug gdb-config diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c index ac45d0f64..1d98fbb81 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -83,102 +83,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_DataOutEndpoint = + .CDC_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC_DataInEndpoint = + + .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -241,30 +241,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h index 159d8d265..ddd9495ea 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerial/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -83,3 +83,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c index 1ee0b344c..258164f8a 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the VirtualSerial demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "VirtualSerial.h" /** LUFA CDC Class driver interface configuration and state information. This structure is @@ -71,7 +71,7 @@ static FILE USBSerialStream; int main(void) { SetupHardware(); - + /* Create a regular character stream for the interface so that it can be used with the stdio.h functions */ CDC_Device_CreateStream(&VirtualSerial_CDC_Interface, &USBSerialStream); @@ -81,7 +81,7 @@ int main(void) for (;;) { CheckJoystickMovement(); - + /* Must throw away unused bytes from the host, or it will lock up while waiting for the device */ CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); @@ -112,7 +112,7 @@ void CheckJoystickMovement(void) uint8_t JoyStatus_LCL = Joystick_GetStatus(); char* ReportString = NULL; static bool ActionSent = false; - + if (JoyStatus_LCL & JOY_UP) ReportString = "Joystick Up\r\n"; else if (JoyStatus_LCL & JOY_DOWN) @@ -125,7 +125,7 @@ void CheckJoystickMovement(void) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; - + if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; @@ -165,3 +165,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface); } + diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h index e4d79139c..a16e4a7a1 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -64,7 +64,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); @@ -75,3 +75,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt index 571168948..4190c2f7d 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/ClassDriver/VirtualSerial/VirtualSerial.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Communications Device Class (Virtual Serial Port) Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -42,14 +42,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Communications Device Class demonstration application. * This gives a simple reference application for implementing * a CDC device acting as a virtual serial port. Joystick * actions are transmitted to the host as strings. The device * does not respond to serial data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/VirtualSerial/makefile b/Demos/Device/ClassDriver/VirtualSerial/makefile index a2e8eb366..1f43438ab 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/makefile +++ b/Demos/Device/ClassDriver/VirtualSerial/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c index 2a52edcd4..8591195cf 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -93,22 +93,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0xEF, .SubClass = 0x02, .Protocol = 0x01, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2062, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -119,22 +119,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 3, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - .CDC_IAD = + .CDC_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -147,111 +147,111 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Header, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_ACM, - + .Capabilities = 0x06, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = CDC_DSUBTYPE_CSInterface_Union, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_DataOutEndpoint = + .CDC_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC_DataInEndpoint = + + .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - .HID_Interface = + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 2, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_MouseHID = + .HID_MouseHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, @@ -262,7 +262,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(MouseReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -328,38 +328,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_MouseHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &MouseReport; Size = sizeof(MouseReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h index 6b6178a93..85a5aed84 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -42,7 +42,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/CDC.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** Endpoint number of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPNUM 2 @@ -61,10 +61,10 @@ /** Endpoint number of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPNUM 1 - + /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -94,3 +94,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c index 8372d4e1b..d5b45edd8 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the VirtualSerialMouse demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "VirtualSerialMouse.h" /** LUFA CDC Class driver interface configuration and state information. This structure is @@ -88,14 +88,14 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Interface = int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); for (;;) { CheckJoystickMovement(); - + /* Must throw away unused bytes from the host, or it will lock up while waiting for the device */ CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface); @@ -127,7 +127,7 @@ void CheckJoystickMovement(void) uint8_t JoyStatus_LCL = Joystick_GetStatus(); char* ReportString = NULL; static bool ActionSent = false; - + if (JoyStatus_LCL & JOY_UP) ReportString = "Joystick Up\r\n"; else if (JoyStatus_LCL & JOY_DOWN) @@ -140,12 +140,12 @@ void CheckJoystickMovement(void) ReportString = "Joystick Pressed\r\n"; else ActionSent = false; - + if ((ReportString != NULL) && (ActionSent == false)) { ActionSent = true; - - CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString, strlen(ReportString)); + + CDC_Device_SendString(&VirtualSerial_CDC_Interface, ReportString, strlen(ReportString)); } } @@ -171,7 +171,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) USB_Device_EnableSOFEvents(); - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the library USB Unhandled Control Request event. */ @@ -204,7 +204,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -220,10 +220,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) MouseReport->Button |= (1 << 1); - + *ReportSize = sizeof(USB_MouseReport_Data_t); return true; } @@ -244,3 +244,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h index 9081253ea..16c7891ae 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -65,7 +65,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); @@ -82,8 +82,9 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); #endif + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt index f43ef0de7..882d47dcd 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/VirtualSerialMouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Combined Communications Device Class (Virtual Serial Port) and Mouse Demo * * \section SSec_Compat Demo Compatibility: @@ -29,7 +29,7 @@ * <td>Communications Device Class (CDC) \n * Human Interface Device Class (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM) \n * Mouse Subclass</td> @@ -46,14 +46,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Combined Communications Device Class/Mouse demonstration application. * This gives a simple reference application for implementing a combined * CDC and HID device acting as a both a virtual serial port and a mouse. * Joystick actions are transmitted to the host as strings and as mouse * movements. The device does not respond to serial data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -74,3 +74,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile index 62d95dbf8..3aa0b487f 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/makefile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/ClassDriver/makefile b/Demos/Device/ClassDriver/makefile index 271b6a426..38924273f 100644 --- a/Demos/Device/ClassDriver/makefile +++ b/Demos/Device/ClassDriver/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -52,10 +52,10 @@ all: $(MAKE) -C VirtualSerial clean $(MAKE) -C VirtualSerial all - + $(MAKE) -C VirtualSerialMouse clean - $(MAKE) -C VirtualSerialMouse all - + $(MAKE) -C VirtualSerialMouse all + %: $(MAKE) -C AudioInput $@ $(MAKE) -C AudioOutput $@ @@ -71,3 +71,4 @@ all: $(MAKE) -C RNDISEthernet $@ $(MAKE) -C VirtualSerial $@ $(MAKE) -C VirtualSerialMouse $@ + diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.c b/Demos/Device/Incomplete/Sideshow/Descriptors.c index 6860ac459..5bab58702 100644 --- a/Demos/Device/Incomplete/Sideshow/Descriptors.c +++ b/Demos/Device/Incomplete/Sideshow/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,25 +33,25 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { Header: {Size: sizeof(USB_Descriptor_Device_t), Type: DTYPE_Device}, - + USBSpecification: VERSION_BCD(01.10), Class: 0x00, SubClass: 0x00, Protocol: 0x00, - + Endpoint0Size: 8, - + VendorID: 0x03EB, ProductID: 0x2040, ReleaseNumber: VERSION_BCD(00.01), - + ManufacturerStrIndex: 0x01, ProductStrIndex: 0x02, SerialNumStrIndex: 0x03, - + NumberOfConfigurations: 1 }; - + USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { .Config = @@ -60,28 +60,28 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = TotalConfigurationSize: sizeof(USB_Descriptor_Configuration_t), TotalInterfaces: 1, - + ConfigurationNumber: 1, ConfigurationStrIndex: NO_DESCRIPTOR, - + ConfigAttributes: (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + MaxPowerConsumption: USB_CONFIG_POWER_MA(100) }, - + .SSHOW_Interface = { Header: {Size: sizeof(USB_Descriptor_Interface_t), Type: DTYPE_Interface}, InterfaceNumber: 0, AlternateSetting: 0, - + TotalEndpoints: 2, - + Class: 0xFF, SubClass: 0x00, Protocol: 0x00, - + InterfaceStrIndex: NO_DESCRIPTOR }, @@ -109,35 +109,35 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { Header: {Size: USB_STRING_LEN(1), Type: DTYPE_String}, - + UnicodeString: {LANGUAGE_ID_ENG} }; USB_Descriptor_String_t PROGMEM ManufacturerString = { Header: {Size: USB_STRING_LEN(11), Type: DTYPE_String}, - + UnicodeString: L"Dean Camera" }; USB_Descriptor_String_t PROGMEM ProductString = { Header: {Size: USB_STRING_LEN(22), Type: DTYPE_String}, - + UnicodeString: L"LUFA Sideshow Demo" }; USB_Descriptor_String_t PROGMEM SerialNumberString = { Header: {Size: USB_STRING_LEN(12), Type: DTYPE_String}, - + UnicodeString: L"000000000000" }; USB_OSDescriptor_t PROGMEM OSDescriptorString = { Header: {Size: sizeof(USB_OSDescriptor_t), Type: DTYPE_String}, - + Signature: L"MSFT100", VendorCode: REQ_GetOSFeatureDescriptor }; @@ -148,7 +148,7 @@ USB_OSCompatibleIDDescriptor_t PROGMEM DevCompatIDs = Version: 0x0100, Index: EXTENDED_COMPAT_ID_DESCRIPTOR, TotalSections: 1, - + SideshowCompatID: {FirstInterfaceNumber: 0x00, CompatibleID: "SIDESHW", SubCompatibleID: "UNIV1"} @@ -201,11 +201,11 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&OSDescriptorString.Header.Size); break; } - + break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } @@ -230,3 +230,4 @@ uint16_t USB_GetOSFeatureDescriptor(const uint16_t wValue, *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/Incomplete/Sideshow/Descriptors.h b/Demos/Device/Incomplete/Sideshow/Descriptors.h index 5ba737b38..8f0f1c960 100644 --- a/Demos/Device/Incomplete/Sideshow/Descriptors.h +++ b/Demos/Device/Incomplete/Sideshow/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -35,14 +35,14 @@ #include <LUFA/Drivers/USB/USB.h> #include <avr/pgmspace.h> - + #include "Sideshow.h" /* Macros: */ - #define SIDESHOW_IN_EPNUM 3 - #define SIDESHOW_OUT_EPNUM 4 + #define SIDESHOW_IN_EPNUM 3 + #define SIDESHOW_OUT_EPNUM 4 #define SIDESHOW_IO_EPSIZE 64 - + /* Type Defines: */ typedef struct { @@ -51,36 +51,36 @@ USB_Descriptor_Endpoint_t SSHOW_DataInEndpoint; USB_Descriptor_Endpoint_t SSHOW_DataOutEndpoint; } USB_Descriptor_Configuration_t; - + typedef struct { USB_Descriptor_Header_t Header; - + int Signature[7]; uint16_t VendorCode; } USB_OSDescriptor_t; - + typedef struct { uint8_t FirstInterfaceNumber; uint8_t Reserved; - + uint8_t CompatibleID[8]; - uint8_t SubCompatibleID[8]; + uint8_t SubCompatibleID[8]; uint8_t Reserved2[6]; } USB_OSCompatibleSection_t; - + typedef struct { uint32_t TotalLength; uint16_t Version; uint16_t Index; uint8_t TotalSections; - + uint8_t Reserved[7]; - + USB_OSCompatibleSection_t SideshowCompatID; } USB_OSCompatibleIDDescriptor_t; @@ -96,3 +96,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.c b/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.c index e8631be8e..c7dca5ad7 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.c +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -40,7 +40,7 @@ SideShow_Application_t* SideShow_GetFreeApplication(void) if (!(InstalledApplications[App].InUse)) return &InstalledApplications[App]; } - + return NULL; } @@ -54,6 +54,7 @@ SideShow_Application_t* SideShow_GetApplicationFromGUID(GUID_t* const GUID) return &InstalledApplications[App]; } } - + return NULL; } + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.h b/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.h index 9624c7c34..02b2ea4ca 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.h +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowApplications.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,10 +32,10 @@ #define _SIDESHOW_APPLICATIONS_H_ /* Includes: */ - #include <avr/io.h> + #include <avr/io.h> #include <string.h> #include <stdbool.h> - + #include "SideshowCommon.h" /* Type Defines: */ @@ -51,12 +51,13 @@ uint32_t CurrentContentID; uint8_t CurrentContent[MAX_CONTENTBUFFER_PER_APP]; } SideShow_Application_t; - + /* External Variables: */ extern SideShow_Application_t InstalledApplications[MAX_APPLICATIONS]; - + /* Function Prototypes: */ SideShow_Application_t* SideShow_GetFreeApplication(void); SideShow_Application_t* SideShow_GetApplicationFromGUID(GUID_t* const GUID); - + #endif + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c index eebc2ef35..bfcebce17 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -42,14 +42,14 @@ Unicode_String_t Manufacturer = {LengthInBytes: sizeof(L"Dean Camera"), Unicode_String_t SupportedLanguage = {LengthInBytes: sizeof(L"en-US:1"), UnicodeString: L"en-US:1"}; - + void Sideshow_ProcessCommandPacket(void) { SideShow_PacketHeader_t PacketHeader; - - Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); + + Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); Endpoint_Read_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t)); - + PacketHeader.Type.TypeFields.Response = true; printf("\r\nCmd: %lX", (PacketHeader.Type.TypeLong & 0x00FFFFFF)); @@ -70,7 +70,7 @@ void Sideshow_ProcessCommandPacket(void) break; case SIDESHOW_CMD_GET_CAPABILITIES: SideShow_GetCapabilities(&PacketHeader); - break; + break; case SIDESHOW_CMD_GET_DEVICE_NAME: SideShow_GetString(&PacketHeader, &DeviceName); break; @@ -94,7 +94,7 @@ void Sideshow_ProcessCommandPacket(void) break; case SIDESHOW_CMD_DELETE_ALL_CONTENT: SideShow_DeleteAllContent(&PacketHeader); - break; + break; case SIDESHOW_CMD_DELETE_APPLICATION: SideShow_DeleteApplication(&PacketHeader); break; @@ -109,11 +109,11 @@ void Sideshow_ProcessCommandPacket(void) PacketHeader.Length = sizeof(SideShow_PacketHeader_t); PacketHeader.Type.TypeFields.NAK = true; - - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); - Endpoint_Write_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t)); + + Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_Write_Stream_LE(&PacketHeader, sizeof(SideShow_PacketHeader_t)); Endpoint_ClearIN(); - + printf(" UNK"); } } @@ -122,8 +122,8 @@ static void SideShow_Ping(SideShow_PacketHeader_t* const PacketHeader) { Endpoint_ClearOUT(); - Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); - Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); + Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); + Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); Endpoint_ClearIN(); } @@ -133,12 +133,12 @@ static void SideShow_Sync(SideShow_PacketHeader_t* const PacketHeader) Endpoint_Read_Stream_LE(&ProtocolGUID, sizeof(GUID_t)); Endpoint_ClearOUT(); - + if (!(GUID_COMPARE(&ProtocolGUID, (uint32_t[])STANDARD_PROTOCOL_GUID))) PacketHeader->Type.TypeFields.NAK = true; - + Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); - Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); + Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); Endpoint_Write_Stream_LE(&ProtocolGUID, sizeof(GUID_t)); Endpoint_ClearIN(); } @@ -159,7 +159,7 @@ static void SideShow_SetCurrentUser(SideShow_PacketHeader_t* const PacketHeader) { SideShow_Read_Unicode_String(&UserSID, sizeof(UserSID.UnicodeString)); Endpoint_ClearOUT(); - + PacketHeader->Length = sizeof(SideShow_PacketHeader_t); Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); @@ -174,7 +174,7 @@ static void SideShow_GetCapabilities(SideShow_PacketHeader_t* const PacketHeader Endpoint_Read_Stream_LE(&Property, sizeof(SideShow_PropertyKey_t)); Endpoint_ClearOUT(); - + printf(" ID: %lu", Property.PropertyID); PacketHeader->Length = sizeof(SideShow_PacketHeader_t); @@ -187,46 +187,46 @@ static void SideShow_GetCapabilities(SideShow_PacketHeader_t* const PacketHeader PropertyData.DataType = VT_I4; PropertyData.Data.Data32 = ScreenText; PacketHeader->Length += sizeof(uint32_t); - + break; case PROPERTY_SIDESHOW_SCREENWIDTH: case PROPERTY_SIDESHOW_CLIENTWIDTH: PropertyData.DataType = VT_UI2; PropertyData.Data.Data16 = 16; PacketHeader->Length += sizeof(uint16_t); - + break; case PROPERTY_SIDESHOW_SCREENHEIGHT: case PROPERTY_SIDESHOW_CLIENTHEIGHT: PropertyData.DataType = VT_UI2; PropertyData.Data.Data16 = 2; PacketHeader->Length += sizeof(uint16_t); - + break; case PROPERTY_SIDESHOW_COLORDEPTH: PropertyData.DataType = VT_UI2; PropertyData.Data.Data16 = 1; PacketHeader->Length += sizeof(uint16_t); - + break; case PROPERTY_SIDESHOW_COLORTYPE: PropertyData.DataType = VT_UI2; PropertyData.Data.Data16 = BlackAndWhiteDisplay; PacketHeader->Length += sizeof(uint16_t); - + break; case PROPERTY_SIDESHOW_DATACACHE: PropertyData.DataType = VT_BOOL; PropertyData.Data.Data16 = false; PacketHeader->Length += sizeof(uint16_t); - + break; case PROPERTY_SIDESHOW_SUPPORTEDLANGS: case PROPERTY_SIDESHOW_CURRENTLANG: PropertyData.DataType = VT_LPWSTR; PropertyData.Data.DataPointer = &SupportedLanguage; PacketHeader->Length += SupportedLanguage.LengthInBytes; - + break; default: PropertyData.DataType = VT_EMPTY; @@ -241,22 +241,22 @@ static void SideShow_GetCapabilities(SideShow_PacketHeader_t* const PacketHeader PropertyData.DataType = VT_UI4; PropertyData.Data.Data32 = GenericDevice; PacketHeader->Length += sizeof(uint32_t); - + break; } - } + } else { - PacketHeader->Type.TypeFields.NAK = true; - + PacketHeader->Type.TypeFields.NAK = true; + printf(" WRONG GUID"); printf(" %lX %lX %lX %lX", Property.PropertyGUID.Chunks[0], Property.PropertyGUID.Chunks[1], - Property.PropertyGUID.Chunks[2], Property.PropertyGUID.Chunks[3]); + Property.PropertyGUID.Chunks[2], Property.PropertyGUID.Chunks[3]); } Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); - + if (!(PacketHeader->Type.TypeFields.NAK)) { switch (PropertyData.DataType) @@ -275,7 +275,7 @@ static void SideShow_GetCapabilities(SideShow_PacketHeader_t* const PacketHeader break; } } - + Endpoint_ClearIN(); return; } @@ -287,7 +287,7 @@ static void SideShow_GetString(SideShow_PacketHeader_t* const PacketHeader, PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + ((Unicode_String_t*)UnicodeStruct)->LengthInBytes; - + Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); SideShow_Write_Unicode_String(UnicodeStruct); @@ -297,7 +297,7 @@ static void SideShow_GetString(SideShow_PacketHeader_t* const PacketHeader, static void SideShow_GetApplicationOrder(SideShow_PacketHeader_t* const PacketHeader) { uint8_t TotalApplications = 0; - + Endpoint_ClearOUT(); for (uint8_t App = 0; App < MAX_APPLICATIONS; App++) @@ -308,11 +308,11 @@ static void SideShow_GetApplicationOrder(SideShow_PacketHeader_t* const PacketHe PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + (TotalApplications * sizeof(GUID_t)); - + Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); Endpoint_Write_DWord_LE(TotalApplications); - + for (uint8_t App = 0; App < MAX_APPLICATIONS; App++) { if (InstalledApplications[App].InUse) @@ -329,7 +329,7 @@ static void SideShow_GetSupportedEndpoints(SideShow_PacketHeader_t* const Packet Endpoint_ClearOUT(); PacketHeader->Length = sizeof(SideShow_PacketHeader_t) + sizeof(uint32_t) + sizeof(GUID_t); - + Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); Endpoint_Write_DWord_LE(1); @@ -369,7 +369,7 @@ static void SideShow_AddApplication(SideShow_PacketHeader_t* const PacketHeader) SideShow_Discard_Byte_Stream(); SideShow_Discard_Byte_Stream(); Endpoint_ClearOUT(); - + CurrApp->InUse = true; CurrApp->HaveContent = false; CurrApp->CurrentContentID = 1; @@ -385,8 +385,8 @@ static void SideShow_AddApplication(SideShow_PacketHeader_t* const PacketHeader) static void SideShow_DeleteApplication(SideShow_PacketHeader_t* const PacketHeader) { GUID_t ApplicationGUID; - - Endpoint_Read_Stream_LE(&ApplicationGUID, sizeof(GUID_t)); + + Endpoint_Read_Stream_LE(&ApplicationGUID, sizeof(GUID_t)); Endpoint_ClearOUT(); SideShow_Application_t* AppToDelete = SideShow_GetApplicationFromGUID(&ApplicationGUID); @@ -406,7 +406,7 @@ static void SideShow_DeleteApplication(SideShow_PacketHeader_t* const PacketHead static void SideShow_DeleteAllApplications(SideShow_PacketHeader_t* const PacketHeader) { Endpoint_ClearOUT(); - + for (uint8_t App = 0; App < MAX_APPLICATIONS; App++) InstalledApplications[App].InUse = false; @@ -420,12 +420,12 @@ static void SideShow_AddContent(SideShow_PacketHeader_t* const PacketHeader) GUID_t ApplicationID; GUID_t EndpointID; SideShow_Application_t* Application; - + Endpoint_Read_Stream_LE(&ApplicationID, sizeof(GUID_t)); Endpoint_Read_Stream_LE(&EndpointID, sizeof(GUID_t)); - + Application = SideShow_GetApplicationFromGUID(&ApplicationID); - + if (Application == NULL) { SideShow_Discard_Byte_Stream(); @@ -435,7 +435,7 @@ static void SideShow_AddContent(SideShow_PacketHeader_t* const PacketHeader) { PacketHeader->Type.TypeFields.NAK = true; } - + Endpoint_ClearOUT(); PacketHeader->Length = sizeof(SideShow_PacketHeader_t); @@ -455,14 +455,14 @@ static void SideShow_DeleteContent(SideShow_PacketHeader_t* const PacketHeader) Endpoint_Read_Stream_LE(&EndpointID, sizeof(GUID_t)); Endpoint_Read_Stream_LE(&ContentID, sizeof(uint32_t)); Endpoint_ClearOUT(); - + SideShow_Application_t* Application = SideShow_GetApplicationFromGUID(&ApplicationID); - + if ((Application != NULL) && (Application->CurrentContentID == ContentID)) Application->HaveContent = false; else PacketHeader->Type.TypeFields.NAK = true; - + PacketHeader->Length = sizeof(SideShow_PacketHeader_t); Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); @@ -480,15 +480,16 @@ static void SideShow_DeleteAllContent(SideShow_PacketHeader_t* const PacketHeade Endpoint_ClearOUT(); SideShow_Application_t* Application = SideShow_GetApplicationFromGUID(&ApplicationID); - + if (Application != NULL) Application->HaveContent = false; else - PacketHeader->Type.TypeFields.NAK = true; + PacketHeader->Type.TypeFields.NAK = true; PacketHeader->Length = sizeof(SideShow_PacketHeader_t); Endpoint_SelectEndpoint(SIDESHOW_IN_EPNUM); Endpoint_Write_Stream_LE(PacketHeader, sizeof(SideShow_PacketHeader_t)); - Endpoint_ClearIN(); + Endpoint_ClearIN(); } + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.h b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.h index 1395cd367..5026d5b5b 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.h +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommands.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -35,7 +35,7 @@ #include <avr/io.h> #include <stdbool.h> #include <string.h> - + #include "Sideshow.h" #include "SideshowCommon.h" #include "SideshowApplications.h" @@ -63,25 +63,25 @@ VT_UI4 = 19, VT_LPWSTR = 31, }; - + enum SideShow_ScreenTypeText_t { ScreenBitmap = 0, ScreenText = 1, }; - + enum SideShow_ColorTypes_t { ColorDisplay = 0, GrayscaleDisplay = 1, - BlackAndWhiteDisplay = 2, + BlackAndWhiteDisplay = 2, }; enum SideShow_DeviceTypes_t - { - GenericDevice = 0, - CameraDevice = 1, - MediaPlayerDevice = 2, + { + GenericDevice = 0, + CameraDevice = 1, + MediaPlayerDevice = 2, PhoneDevice = 3, VideoDevice = 4, PIMDevice = 5, @@ -94,11 +94,11 @@ GUID_t PropertyGUID; uint32_t PropertyID; } SideShow_PropertyKey_t; - + typedef struct { uint32_t DataType; - + union { void* DataPointer; @@ -107,12 +107,12 @@ uint32_t Data32; } Data; } SideShow_PropertyData_t; - + /* Macros: */ #define SIDESHOW_CMD_PING 0x001 #define SIDESHOW_CMD_SET_CURRENT_USER 0x100 #define SIDESHOW_CMD_GET_CURRENT_USER 0x101 - #define SIDESHOW_CMD_GET_CAPABILITIES 0x103 + #define SIDESHOW_CMD_GET_CAPABILITIES 0x103 #define SIDESHOW_CMD_GET_APPLICATION_ORDER 0x104 #define SIDESHOW_CMD_ADD_APPLICATION 0x10D #define SIDESHOW_CMD_DELETE_APPLICATION 0x10E @@ -139,12 +139,12 @@ #define PROPERTY_SIDESHOW_CLIENTWIDTH 15 #define PROPERTY_SIDESHOW_CLIENTHEIGHT 16 #define PROPERTY_SIDESHOW_DEVICEICON 17 - + #define PROPERTY_DEVICE_DEVICETYPE 15 - + /* Function Prototypes: */ void Sideshow_ProcessCommandPacket(void); - + #if defined(INCLUDE_FROM_SIDESHOWCOMMANDS_H) static void SideShow_Ping(SideShow_PacketHeader_t* const PacketHeader); static void SideShow_Sync(SideShow_PacketHeader_t* const PacketHeader); @@ -164,3 +164,4 @@ #endif #endif + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.c b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.c index 02b681c50..95d3ee1de 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.c +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -35,20 +35,20 @@ uint16_t SideShow_Read_Unicode_String(void* const UnicodeString, { Unicode_String_t* const UnicodeStruct = (Unicode_String_t*)UnicodeString; uint32_t UnicodeCharsToRead; - + Endpoint_Read_Stream_LE(&UnicodeCharsToRead, sizeof(uint32_t)); - + int UnicodeData[UnicodeCharsToRead]; UnicodeStruct->LengthInBytes = (UnicodeCharsToRead << 1); Endpoint_Read_Stream_LE(&UnicodeData, UnicodeStruct->LengthInBytes); - + if (UnicodeStruct->LengthInBytes > MaxBytes) UnicodeStruct->LengthInBytes = MaxBytes; - + memcpy(&UnicodeStruct->UnicodeString, &UnicodeData, UnicodeStruct->LengthInBytes); - + return ((UnicodeCharsToRead << 1) + sizeof(uint32_t)); } @@ -69,3 +69,4 @@ void SideShow_Discard_Byte_Stream(void) Endpoint_Read_Stream_LE(&StreamSize, sizeof(uint32_t)); Endpoint_Discard_Stream(StreamSize); } + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h index 8a90c50cf..d72464f91 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowCommon.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,15 +33,15 @@ /* Includes: */ #include <avr/io.h> - #include <string.h> - + #include <string.h> + #include <LUFA/Drivers/USB/USB.h> /* Macros: */ #define GUID_COMPARE(a, b) (memcmp(a, b, sizeof(GUID_t)) == 0) - + #define ARRAY_ELEMENTS(x) (sizeof(x) / sizeof(x[0])) - + #define UNICODE_STRING_t(x) struct \ { \ uint16_t LengthInBytes; \ @@ -67,12 +67,12 @@ { uint32_t Chunks[4]; } GUID_t; - + typedef struct { uint16_t LengthInBytes; int UnicodeString[]; - } Unicode_String_t; + } Unicode_String_t; typedef union { @@ -84,10 +84,10 @@ int ErrorCode : 6; int NAK : 1; - int Response : 1; + int Response : 1; } TypeFields; } SideShowPacketType_t; - + typedef struct { uint32_t Length; @@ -101,4 +101,4 @@ void SideShow_Write_Unicode_String(void* UnicodeString); void SideShow_Discard_Byte_Stream(void); -#endif
\ No newline at end of file +#endif diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.c b/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.c index 5bfae1b49..8c627fbe7 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.c +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -36,7 +36,7 @@ bool SideShow_AddSimpleContent(SideShow_PacketHeader_t* const PacketHeader, { uint32_t ContentSize; uint32_t ContentID; - + Endpoint_Read_Stream_LE(&ContentID, sizeof(uint32_t)); PacketHeader->Length -= sizeof(uint32_t); @@ -47,16 +47,16 @@ bool SideShow_AddSimpleContent(SideShow_PacketHeader_t* const PacketHeader, return false; } - + Endpoint_Read_Stream_LE(&ContentSize, sizeof(uint32_t)); Endpoint_Read_Stream_LE(&Application->CurrentContent, sizeof(XML_START_TAG) - 1); - + PacketHeader->Length -= sizeof(uint32_t) + (sizeof(XML_START_TAG) - 1); if (!(memcmp(&Application->CurrentContent, XML_START_TAG, (sizeof(XML_START_TAG) - 1)))) { SideShow_ProcessXMLContent(&Application->CurrentContent, (ContentSize - (sizeof(XML_END_TAG) - 1))); - + Endpoint_Discard_Stream(sizeof(XML_END_TAG) - 1); Application->HaveContent = true; @@ -66,7 +66,7 @@ bool SideShow_AddSimpleContent(SideShow_PacketHeader_t* const PacketHeader, printf(" BINARY"); Endpoint_Discard_Stream(ContentSize); } - + return true; } @@ -76,3 +76,4 @@ static void SideShow_ProcessXMLContent(void* ContentData, printf(" XML"); Endpoint_Discard_Stream(ContentSize); } + diff --git a/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h b/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h index 6e3031c13..20fe5de11 100644 --- a/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h +++ b/Demos/Device/Incomplete/Sideshow/Lib/SideshowContent.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ #include "SideshowCommon.h" #include "SideshowApplications.h" - + /* Enums: */ enum SideShow_ContentTypes_t { @@ -50,24 +50,24 @@ Content_Text = 4, Content_EndOfContent = 5 }; - + enum SideShow_ActionTypes_t { TODO }; - + enum SideShow_AlignmentTypes_t { TODO2 }; - + /* Type Defines: */ typedef struct { uint8_t ContentType; - uint8_t ContentSize; + uint8_t ContentSize; } SideShow_Content_Header_t; - + typedef struct { SideShow_Content_Header_t Header; @@ -86,7 +86,7 @@ bool IsSelected; char Text[]; } SideShow_Content_MenuItem_t; - + typedef struct { SideShow_Content_Header_t Header; @@ -94,7 +94,7 @@ uint8_t Key; uint32_t Target; } SideShow_Content_Button_t; - + typedef struct { SideShow_Content_Header_t Header; @@ -108,13 +108,13 @@ { SideShow_Content_Header_t Header; - char Text[]; + char Text[]; } SideShow_Content_Text_t; - + /* Defines: */ #define XML_START_TAG "<body>" #define XML_END_TAG "</body>" - + /* Function Prototypes: */ bool SideShow_AddSimpleContent(SideShow_PacketHeader_t* const PacketHeader, SideShow_Application_t* const Application); @@ -123,5 +123,5 @@ static void SideShow_ProcessXMLContent(void* ContentData, uint32_t ContentSize); #endif - -#endif
\ No newline at end of file + +#endif diff --git a/Demos/Device/Incomplete/Sideshow/Sideshow.c b/Demos/Device/Incomplete/Sideshow/Sideshow.c index 8b2842bdf..4882af9bd 100644 --- a/Demos/Device/Incomplete/Sideshow/Sideshow.c +++ b/Demos/Device/Incomplete/Sideshow/Sideshow.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -36,12 +36,12 @@ externally connected interactive display. Upon enumeration, this will appear as a new SideShow device which can have gadgets loaded onto it. - + Note that while the incoming content is buffered in packet struct form, the data is not actually displayed. It is left to the user to write sufficient code to read out the packed data for display to a screen. - + Installed gadgets can be accessed through the InstalledApplications array, with entries that have their InUse flag set being active. As only the active content is displayed on the device due to memory @@ -59,7 +59,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { SideShow_Task(); @@ -76,7 +76,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ LEDs_Init(); USB_Init(); @@ -121,9 +121,9 @@ void EVENT_USB_Device_UnhandledControlRequest(void) if (DescriptorSize == NO_DESCRIPTOR) return; - + Endpoint_ClearSETUP(); - + Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize); Endpoint_ClearOUT(); } @@ -131,7 +131,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) break; } } - + void SideShow_Task(void) { /* Device must be connected and configured for the task to run */ @@ -140,7 +140,7 @@ void SideShow_Task(void) /* Select the SideShow data out endpoint */ Endpoint_SelectEndpoint(SIDESHOW_OUT_EPNUM); - + /* Check to see if a new SideShow message has been received */ if (Endpoint_IsReadWriteAllowed()) { @@ -148,3 +148,4 @@ void SideShow_Task(void) Sideshow_ProcessCommandPacket(); } } + diff --git a/Demos/Device/Incomplete/Sideshow/Sideshow.h b/Demos/Device/Incomplete/Sideshow/Sideshow.h index 9e4b06226..367fb4b20 100644 --- a/Demos/Device/Incomplete/Sideshow/Sideshow.h +++ b/Demos/Device/Incomplete/Sideshow/Sideshow.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ * descriptors of the device. */ #define REQ_GetOSFeatureDescriptor 0x01 - + /** Descriptor index for a Microsoft Proprietary Extended Device Compatibility descriptor. */ #define EXTENDED_COMPAT_ID_DESCRIPTOR 0x0004 @@ -65,7 +65,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void SideShow_Task(void); @@ -76,3 +76,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/Incomplete/Sideshow/makefile b/Demos/Device/Incomplete/Sideshow/makefile index 217d0fd3d..6da7dd700 100644 --- a/Demos/Device/Incomplete/Sideshow/makefile +++ b/Demos/Device/Incomplete/Sideshow/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -141,7 +141,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -154,7 +154,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -268,7 +268,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -281,7 +281,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -293,7 +293,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -305,7 +305,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -328,7 +328,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -362,7 +362,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -396,7 +396,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -425,7 +425,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -444,10 +444,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -512,11 +512,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -543,9 +543,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -643,14 +643,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -672,7 +672,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -716,3 +716,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c index aac16909d..9c66459a8 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Peter Lawrence (majbthrd [at] gmail [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,9 +31,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -84,61 +84,61 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Interface = + + .Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 3, - + .Class = 0xFE, .SubClass = 0x03, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .DataOutEndpoint = + .DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | TMC_OUT_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, .PollingIntervalMS = 0x00 }, - - .DataInEndpoint = + + .DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | TMC_IN_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_IO_EPSIZE, .PollingIntervalMS = 0x00 }, - - .NotificationEndpoint = + + .NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | TMC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = TMC_NOTIFICATION_EPSIZE, @@ -201,30 +201,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h index fefb6b555..dc3505f6d 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/Descriptors.h @@ -79,3 +79,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
#endif
+ diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c index 7949a7ebd..01d3e66bc 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.c @@ -429,3 +429,4 @@ uint8_t StreamCallback_AbortOUTOnRequest(void) /* Continue with the current stream operation */
return STREAMCALLBACK_Continue;
}
+ diff --git a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h index d0db01ef9..f069e8eb9 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h +++ b/Demos/Device/Incomplete/TestAndMeasurement/TestAndMeasurement.h @@ -154,3 +154,4 @@ uint8_t StreamCallback_AbortOUTOnRequest(void);
#endif
+ diff --git a/Demos/Device/Incomplete/TestAndMeasurement/makefile b/Demos/Device/Incomplete/TestAndMeasurement/makefile index c4c1c059b..7e282ed57 100644 --- a/Demos/Device/Incomplete/TestAndMeasurement/makefile +++ b/Demos/Device/Incomplete/TestAndMeasurement/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.c b/Demos/Device/LowLevel/AudioInput/AudioInput.c index 4abc17422..a984a2ab8 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.c +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -48,7 +48,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { USB_Audio_Task(); @@ -65,13 +65,13 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ LEDs_Init(); ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32); ADC_SetupChannel(MIC_IN_ADC_CHANNEL); USB_Init(); - + /* Start the ADC conversion in free running mode */ ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | MIC_IN_ADC_MUX_MASK); } @@ -133,7 +133,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Set Interface is not handled by the library, as its function is application-specific */ if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE)) { - Endpoint_ClearSETUP(); + Endpoint_ClearSETUP(); Endpoint_ClearStatusStage(); /* Check if the host is enabling the audio interface (setting AlternateSetting to 1) */ @@ -157,7 +157,7 @@ void USB_Audio_Task(void) /* Select the audio stream endpoint */ Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM); - + /* Check if the current endpoint can be written to and that the next sample should be stored */ if (Endpoint_IsINReady() && (TIFR0 & (1 << OCF0A))) { @@ -166,7 +166,7 @@ void USB_Audio_Task(void) /* Audio sample is ADC value scaled to fit the entire range */ int16_t AudioSample = ((SAMPLE_MAX_RANGE / ADC_MAX_RANGE) * ADC_GetResult()); - + #if defined(MICROPHONE_BIASED_TO_HALF_RAIL) /* Microphone is biased to half rail voltage, subtract the bias from the sample value */ AudioSample -= (SAMPLE_MAX_RANGE / 2); @@ -183,3 +183,4 @@ void USB_Audio_Task(void) } } } + diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.h b/Demos/Device/LowLevel/AudioInput/AudioInput.h index 7be23e8dd..53b63517b 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.h +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for AudioInput.c. */ - + #ifndef _AUDIO_INPUT_H_ #define _AUDIO_INPUT_H_ @@ -43,7 +43,7 @@ #include <avr/interrupt.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> @@ -52,10 +52,10 @@ /* Macros: */ /** ADC channel number for the microphone input. */ #define MIC_IN_ADC_CHANNEL 2 - + /** ADC channel MUX mask for the microphone input. */ #define MIC_IN_ADC_MUX_MASK ADC_CHANNEL2 - + /** Maximum ADC sample value for the microphone input. */ #define SAMPLE_MAX_RANGE 0xFFFF @@ -82,5 +82,6 @@ void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/LowLevel/AudioInput/AudioInput.txt b/Demos/Device/LowLevel/AudioInput/AudioInput.txt index d61e77a52..39d78e784 100644 --- a/Demos/Device/LowLevel/AudioInput/AudioInput.txt +++ b/Demos/Device/LowLevel/AudioInput/AudioInput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Input Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,19 +43,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Input device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB microphone. Incoming audio from the ADC channel 1 will * be sampled and sent to the host computer. - * + * * To use, connect a microphone to the ADC channel 2. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -81,3 +81,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.c b/Demos/Device/LowLevel/AudioInput/Descriptors.c index 150fb3367..432f0c909 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.c +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2047, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,134 +80,134 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_AudioHeader, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = (sizeof(USB_Audio_Interface_AC_t) + sizeof(USB_Audio_InputTerminal_t) + sizeof(USB_Audio_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumbers = {1}, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_InputTerminal, - + .TerminalID = 0x01, .TerminalType = TERMINAL_IN_MIC, .AssociatedOutputTerminal = 0x00, - + .TotalChannels = 1, .ChannelConfig = 0, - + .ChannelStrIndex = NO_DESCRIPTOR, .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_OutputTerminal, - + .TerminalID = 0x02, .TerminalType = TERMINAL_STREAMING, .AssociatedInputTerminal = 0x00, - + .SourceID = 0x01, - + .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 1, - + .TotalEndpoints = 1, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_General, - + .TerminalLink = 0x02, - + .FrameDelay = 1, .AudioFormat = 0x0001 }, - - .Audio_AudioFormat = + + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Format_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_Format, .FormatType = 0x01, .Channels = 0x01, - + .SubFrameSize = 0x02, .BitResolution = 16, .SampleFrequencyType = (sizeof(ConfigurationDescriptor.Audio_AudioFormat.SampleFrequencies) / sizeof(Audio_SampleFreq_t)), - + .SampleFrequencies = {SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -216,18 +216,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = DSUBTYPE_General, - + .Attributes = EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -240,7 +240,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -251,7 +251,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -262,7 +262,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Audio In Demo" }; @@ -288,30 +288,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/AudioInput/Descriptors.h b/Demos/Device/LowLevel/AudioInput/Descriptors.h index d154f01a4..c8b43b617 100644 --- a/Demos/Device/LowLevel/AudioInput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioInput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -59,7 +59,7 @@ /** Audio class descriptor subtype value for an Audio class specific descriptor indicating the format of an audio stream. */ #define DSUBTYPE_Format 0x02 - + //@{ /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */ @@ -94,7 +94,7 @@ //@{ /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */ - + #define TERMINAL_UNDEFINED 0x0100 #define TERMINAL_STREAMING 0x0101 #define TERMINAL_VENDOR 0x01FF @@ -120,7 +120,7 @@ * \param[in] freq Required audio sampling frequency in HZ */ #define SAMPLE_FREQ(freq) {LowWord: ((uint32_t)(freq) & 0x00FFFF), HighByte: (((uint32_t)(freq) >> 16) & 0x0000FF)} - + /** Mask for the attributes parameter of an Audio class specific Endpoint descriptor, indicating that the endpoint * accepts only filled endpoint packets of audio samples. */ @@ -133,16 +133,16 @@ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. */ #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) - + /** Sample frequency of the data being transmitted through the streaming endpoint. */ #define AUDIO_SAMPLE_FREQUENCY 48000 - + /* Type Defines: */ /** Type define for an Audio class specific interface descriptor. This follows a regular interface descriptor to * supply extra information about the audio device's layout to the host. See the USB Audio specification for more @@ -155,11 +155,11 @@ uint16_t ACSpecification; /**< Binary coded decimal value, indicating the supported Audio Class specification version */ uint16_t TotalLength; /**< Total length of the Audio class specific descriptors, including this descriptor */ - + uint8_t InCollection; /**< Total number of audio class interfaces within this device */ uint8_t InterfaceNumbers[1]; /**< Interface numbers of each audio interface */ } USB_Audio_Interface_AC_t; - + /** Type define for an Audio class specific Feature Unit descriptor. This indicates to the host what features * are present in the device's audio stream for basic control, such as per-channel volume. See the USB Audio * specification for more details. @@ -168,13 +168,13 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t UnitID; /**< ID value of this feature unit - must be a unique value within the device */ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit */ - + uint8_t ControlSize; /**< Size of each element in the ChanelControlls array */ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel */ - + uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_Audio_FeatureUnit_t; @@ -186,7 +186,7 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t TerminalID; /**< ID value of this terminal unit - must be a unique value within the device */ uint16_t TerminalType; /**< Type of terminal, a TERMINAL_* mask */ uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals @@ -194,7 +194,7 @@ */ uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */ uint16_t ChannelConfig; /**< CHANNEL_* masks indicating what channel layout is supported by this terminal */ - + uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device */ uint8_t TerminalStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_Audio_InputTerminal_t; @@ -207,17 +207,17 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t TerminalID; /**< ID value of this terminal unit - must be a unique value within the device */ uint16_t TerminalType; /**< Type of terminal, a TERMINAL_* mask */ uint8_t AssociatedInputTerminal; /**< ID of associated input terminal, for physically grouped terminals * such as the speaker and microphone of a phone handset */ uint8_t SourceID; /**< ID value of the unit this terminal's audio is sourced from */ - + uint8_t TerminalStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_Audio_OutputTerminal_t; - + /** Type define for an Audio class specific streaming interface descriptor. This indicates to the host * how audio streams within the device are formatted. See the USB Audio specification for more details. */ @@ -225,13 +225,13 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t TerminalLink; /**< ID value of the output terminal this descriptor is describing */ - + uint8_t FrameDelay; /**< Delay in frames resulting from the complete sample processing from input to output */ uint16_t AudioFormat; /**< Format of the audio stream, see Audio Device Formats specification */ } USB_Audio_Interface_AS_t; - + /** Type define for a 24bit audio sample frequency structure. GCC does not contain a built in 24bit datatype, * this this structure is used to build up the value instead. Fill this structure with the SAMPLE_FREQ() macro. */ @@ -252,15 +252,15 @@ uint8_t FormatType; /**< Format of the audio stream, see Audio Device Formats specification */ uint8_t Channels; /**< Total number of discrete channels in the stream */ - + uint8_t SubFrameSize; /**< Size in bytes of each channel's sample data in the stream */ uint8_t BitResolution; /**< Bits of resolution of each channel's samples in the stream */ - uint8_t SampleFrequencyType; /**< Total number of sample frequencies supported by the device */ + uint8_t SampleFrequencyType; /**< Total number of sample frequencies supported by the device */ Audio_SampleFreq_t SampleFrequencies[1]; /**< Sample frequencies supported by the device */ } USB_Audio_Format_t; - - /** Type define for an Audio class specific endpoint descriptor. This contains a regular endpoint + + /** Type define for an Audio class specific endpoint descriptor. This contains a regular endpoint * descriptor with a few Audio-class specific extensions. See the USB Audio specification for more details. */ typedef struct @@ -270,7 +270,7 @@ uint8_t Refresh; /**< Always set to zero */ uint8_t SyncEndpointNumber; /**< Endpoint address to send synchronization information to, if needed (zero otherwise) */ } USB_Audio_StreamEndpoint_Std_t; - + /** Type define for an Audio class specific extended endpoint descriptor. This contains extra information * on the usage of endpoints used to stream audio in and out of the USB Audio device, and follows an Audio * class specific extended endpoint descriptor. See the USB Audio specification for more details. @@ -279,13 +279,13 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t Attributes; /**< Audio class specific endpoint attributes, such as ACCEPTS_SMALL_PACKETS */ uint8_t LockDelayUnits; /**< Units used for the LockDelay field, see Audio class specification */ uint16_t LockDelay; /**< Time required to internally lock endpoint's internal clock recovery circuitry */ } USB_Audio_StreamEndpoint_Spc_t; - + /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which * vary between devices, and which describe the device's usage to the host. @@ -304,7 +304,7 @@ USB_Audio_StreamEndpoint_Std_t Audio_StreamEndpoint; USB_Audio_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -312,3 +312,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile index 34d6b2545..1b7fd07a3 100644 --- a/Demos/Device/LowLevel/AudioInput/makefile +++ b/Demos/Device/LowLevel/AudioInput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -136,7 +136,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -149,7 +149,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -263,7 +263,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -276,7 +276,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -288,7 +288,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -300,7 +300,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -323,7 +323,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -357,7 +357,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -391,7 +391,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -420,7 +420,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -439,10 +439,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -507,11 +507,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -538,9 +538,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -638,14 +638,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -667,7 +667,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -711,3 +711,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c index fbadf8d0b..e33eb401e 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.c +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the AudioOutput demo. This file contains the main tasks of the demo and * is responsible for the initial application hardware configuration. */ - + #include "AudioOutput.h" /** Flag to indicate if the streaming audio alternative interface has been selected by the host. */ @@ -48,7 +48,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { USB_Audio_Task(); @@ -65,7 +65,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ LEDs_Init(); USB_Init(); @@ -78,12 +78,12 @@ void EVENT_USB_Device_Connect(void) { /* Indicate USB enumerating */ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + /* Sample reload timer initialization */ OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1; TCCR0A = (1 << WGM01); // CTC mode TCCR0B = (1 << CS01); // Fcpu/8 speed - + #if defined(AUDIO_OUT_MONO) /* Set speaker as output */ DDRC |= (1 << 6); @@ -100,7 +100,7 @@ void EVENT_USB_Device_Connect(void) TCCR3A = ((1 << WGM30) | (1 << COM3A1) | (1 << COM3A0) | (1 << COM3B1) | (1 << COM3B0)); // Set on match, clear on TOP TCCR3B = ((1 << WGM32) | (1 << CS30)); // Fast 8-Bit PWM, F_CPU speed -#endif +#endif } /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via @@ -112,7 +112,7 @@ void EVENT_USB_Device_Disconnect(void) TCCR0B = 0; #if (defined(AUDIO_OUT_MONO) || defined(AUDIO_OUT_STEREO)) TCCR3B = 0; -#endif +#endif #if defined(AUDIO_OUT_MONO) /* Set speaker as input to reduce current draw */ @@ -182,11 +182,11 @@ void USB_Audio_Task(void) /* Check to see if the streaming interface is selected, if not the host is not receiving audio */ if (!(StreamingAudioInterfaceSelected)) - return; + return; /* Select the audio stream endpoint */ Endpoint_SelectEndpoint(AUDIO_STREAM_EPNUM); - + /* Check if the current endpoint can be read from (contains a packet) and that the next sample should be read */ if (Endpoint_IsOUTReceived() && (TIFR0 & (1 << OCF0A))) { @@ -234,3 +234,4 @@ void USB_Audio_Task(void) LEDs_SetAllLEDs(LEDMask); } } + diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h index de7b07175..7e224f23c 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.h +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -43,11 +43,11 @@ #include <avr/interrupt.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -60,7 +60,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void USB_Audio_Task(void); @@ -71,3 +71,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt index 079b537b0..c42fc744b 100644 --- a/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt +++ b/Demos/Device/LowLevel/AudioOutput/AudioOutput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Output Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,13 +43,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Output device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB speaker. Outgoing audio will output in 8-bit PWM onto * the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on @@ -57,7 +57,7 @@ * mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on * the board LEDs in all modes. Decouple audio outputs with a capacitor and * attach to a speaker to hear the audio. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -94,3 +94,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.c b/Demos/Device/LowLevel/AudioOutput/Descriptors.c index 1194568ad..cc3d8ccae 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.c +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2046, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,134 +80,134 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_AudioHeader, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = (sizeof(USB_Audio_Interface_AC_t) + sizeof(USB_Audio_InputTerminal_t) + sizeof(USB_Audio_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumbers = {1}, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_InputTerminal, - + .TerminalID = 0x01, .TerminalType = TERMINAL_STREAMING, .AssociatedOutputTerminal = 0x00, - + .TotalChannels = 2, .ChannelConfig = (CHANNEL_LEFT_FRONT | CHANNEL_RIGHT_FRONT), - + .ChannelStrIndex = NO_DESCRIPTOR, .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_OutputTerminal, - + .TerminalID = 0x02, .TerminalType = TERMINAL_OUT_SPEAKER, .AssociatedInputTerminal = 0x00, - + .SourceID = 0x01, - - .TerminalStrIndex = NO_DESCRIPTOR + + .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 1, - + .TotalEndpoints = 1, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_General, - + .TerminalLink = 0x01, - + .FrameDelay = 1, .AudioFormat = 0x0001 }, - - .Audio_AudioFormat = + + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Format_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_Format, .FormatType = 0x01, .Channels = 0x02, - + .SubFrameSize = 0x02, .BitResolution = 16, .SampleFrequencyType = (sizeof(ConfigurationDescriptor.Audio_AudioFormat.SampleFrequencies) / - sizeof(Audio_SampleFreq_t)), + sizeof(Audio_SampleFreq_t)), .SampleFrequencies = {SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -216,18 +216,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = DSUBTYPE_General, - + .Attributes = EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -240,7 +240,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -251,7 +251,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -262,7 +262,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Audio Out Demo" }; @@ -292,26 +292,27 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/AudioOutput/Descriptors.h b/Demos/Device/LowLevel/AudioOutput/Descriptors.h index cd6b2b8cf..c8b43b617 100644 --- a/Demos/Device/LowLevel/AudioOutput/Descriptors.h +++ b/Demos/Device/LowLevel/AudioOutput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -59,7 +59,7 @@ /** Audio class descriptor subtype value for an Audio class specific descriptor indicating the format of an audio stream. */ #define DSUBTYPE_Format 0x02 - + //@{ /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */ @@ -94,7 +94,7 @@ //@{ /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */ - + #define TERMINAL_UNDEFINED 0x0100 #define TERMINAL_STREAMING 0x0101 #define TERMINAL_VENDOR 0x01FF @@ -120,7 +120,7 @@ * \param[in] freq Required audio sampling frequency in HZ */ #define SAMPLE_FREQ(freq) {LowWord: ((uint32_t)(freq) & 0x00FFFF), HighByte: (((uint32_t)(freq) >> 16) & 0x0000FF)} - + /** Mask for the attributes parameter of an Audio class specific Endpoint descriptor, indicating that the endpoint * accepts only filled endpoint packets of audio samples. */ @@ -133,16 +133,16 @@ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. */ #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) - + /** Sample frequency of the data being transmitted through the streaming endpoint. */ #define AUDIO_SAMPLE_FREQUENCY 48000 - + /* Type Defines: */ /** Type define for an Audio class specific interface descriptor. This follows a regular interface descriptor to * supply extra information about the audio device's layout to the host. See the USB Audio specification for more @@ -155,11 +155,11 @@ uint16_t ACSpecification; /**< Binary coded decimal value, indicating the supported Audio Class specification version */ uint16_t TotalLength; /**< Total length of the Audio class specific descriptors, including this descriptor */ - + uint8_t InCollection; /**< Total number of audio class interfaces within this device */ uint8_t InterfaceNumbers[1]; /**< Interface numbers of each audio interface */ } USB_Audio_Interface_AC_t; - + /** Type define for an Audio class specific Feature Unit descriptor. This indicates to the host what features * are present in the device's audio stream for basic control, such as per-channel volume. See the USB Audio * specification for more details. @@ -168,13 +168,13 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t UnitID; /**< ID value of this feature unit - must be a unique value within the device */ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit */ - + uint8_t ControlSize; /**< Size of each element in the ChanelControlls array */ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel */ - + uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_Audio_FeatureUnit_t; @@ -186,7 +186,7 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t TerminalID; /**< ID value of this terminal unit - must be a unique value within the device */ uint16_t TerminalType; /**< Type of terminal, a TERMINAL_* mask */ uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals @@ -194,7 +194,7 @@ */ uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */ uint16_t ChannelConfig; /**< CHANNEL_* masks indicating what channel layout is supported by this terminal */ - + uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device */ uint8_t TerminalStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_Audio_InputTerminal_t; @@ -207,17 +207,17 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t TerminalID; /**< ID value of this terminal unit - must be a unique value within the device */ uint16_t TerminalType; /**< Type of terminal, a TERMINAL_* mask */ uint8_t AssociatedInputTerminal; /**< ID of associated input terminal, for physically grouped terminals * such as the speaker and microphone of a phone handset */ uint8_t SourceID; /**< ID value of the unit this terminal's audio is sourced from */ - + uint8_t TerminalStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_Audio_OutputTerminal_t; - + /** Type define for an Audio class specific streaming interface descriptor. This indicates to the host * how audio streams within the device are formatted. See the USB Audio specification for more details. */ @@ -225,13 +225,13 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t TerminalLink; /**< ID value of the output terminal this descriptor is describing */ - + uint8_t FrameDelay; /**< Delay in frames resulting from the complete sample processing from input to output */ uint16_t AudioFormat; /**< Format of the audio stream, see Audio Device Formats specification */ } USB_Audio_Interface_AS_t; - + /** Type define for a 24bit audio sample frequency structure. GCC does not contain a built in 24bit datatype, * this this structure is used to build up the value instead. Fill this structure with the SAMPLE_FREQ() macro. */ @@ -252,15 +252,15 @@ uint8_t FormatType; /**< Format of the audio stream, see Audio Device Formats specification */ uint8_t Channels; /**< Total number of discrete channels in the stream */ - + uint8_t SubFrameSize; /**< Size in bytes of each channel's sample data in the stream */ uint8_t BitResolution; /**< Bits of resolution of each channel's samples in the stream */ - uint8_t SampleFrequencyType; /**< Total number of sample frequencies supported by the device */ + uint8_t SampleFrequencyType; /**< Total number of sample frequencies supported by the device */ Audio_SampleFreq_t SampleFrequencies[1]; /**< Sample frequencies supported by the device */ } USB_Audio_Format_t; - - /** Type define for an Audio class specific endpoint descriptor. This contains a regular endpoint + + /** Type define for an Audio class specific endpoint descriptor. This contains a regular endpoint * descriptor with a few Audio-class specific extensions. See the USB Audio specification for more details. */ typedef struct @@ -270,7 +270,7 @@ uint8_t Refresh; /**< Always set to zero */ uint8_t SyncEndpointNumber; /**< Endpoint address to send synchronization information to, if needed (zero otherwise) */ } USB_Audio_StreamEndpoint_Std_t; - + /** Type define for an Audio class specific extended endpoint descriptor. This contains extra information * on the usage of endpoints used to stream audio in and out of the USB Audio device, and follows an Audio * class specific extended endpoint descriptor. See the USB Audio specification for more details. @@ -279,12 +279,12 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint8_t Attributes; /**< Audio class specific endpoint attributes, such as ACCEPTS_SMALL_PACKETS */ uint8_t LockDelayUnits; /**< Units used for the LockDelay field, see Audio class specification */ uint16_t LockDelay; /**< Time required to internally lock endpoint's internal clock recovery circuitry */ - } USB_Audio_StreamEndpoint_Spc_t; + } USB_Audio_StreamEndpoint_Spc_t; /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -304,7 +304,7 @@ USB_Audio_StreamEndpoint_Std_t Audio_StreamEndpoint; USB_Audio_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -312,3 +312,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile index 6bcfcafd5..1f526006c 100644 --- a/Demos/Device/LowLevel/AudioOutput/makefile +++ b/Demos/Device/LowLevel/AudioOutput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -138,7 +138,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -151,7 +151,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -265,7 +265,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -278,7 +278,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -290,7 +290,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -302,7 +302,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -325,7 +325,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -359,7 +359,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -393,7 +393,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -422,7 +422,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -441,10 +441,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -509,11 +509,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -540,9 +540,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -640,14 +640,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -669,7 +669,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -713,3 +713,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c index ac9739fd7..ca5af2770 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0xEF, .SubClass = 0x02, .Protocol = 0x01, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204E, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,22 +83,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 4, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC1_IAD = + + .CDC1_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -112,94 +112,94 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - .CDC1_CCI_Interface = + .CDC1_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC1_Functional_Header = + .CDC1_Functional_Header = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = 0x00, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC1_Functional_ACM = + .CDC1_Functional_ACM = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = 0x02, - + .Capabilities = 0x06, }, - - .CDC1_Functional_Union = + + .CDC1_Functional_Union = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = 0x06, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC1_ManagementEndpoint = + .CDC1_ManagementEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC1_DCI_Interface = + .CDC1_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC1_DataOutEndpoint = + .CDC1_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC1_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC1_DataInEndpoint = + + .CDC1_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC1_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - .CDC2_IAD = + .CDC2_IAD = { .Header = {.Size = sizeof(USB_Descriptor_Interface_Association_t), .Type = DTYPE_InterfaceAssociation}, @@ -213,87 +213,87 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .IADStrIndex = NO_DESCRIPTOR }, - .CDC2_CCI_Interface = + .CDC2_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 2, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC2_Functional_Header = + .CDC2_Functional_Header = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = 0x00, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC2_Functional_ACM = + .CDC2_Functional_ACM = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = 0x02, - + .Capabilities = 0x06, }, - - .CDC2_Functional_Union = + + .CDC2_Functional_Union = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = 0x06, - + .MasterInterfaceNumber = 2, .SlaveInterfaceNumber = 3, }, - .CDC2_ManagementEndpoint = + .CDC2_ManagementEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC2_DCI_Interface = + .CDC2_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 3, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC2_DataOutEndpoint = + .CDC2_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC2_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC2_DataInEndpoint = + + .CDC2_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC2_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -308,7 +308,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -319,7 +319,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -330,7 +330,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Dual CDC Demo" }; @@ -349,37 +349,38 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const void* Address = NULL; uint16_t Size = NO_DESCRIPTOR; - + switch (DescriptorType) { case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h index 90091ea22..ba876f1df 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h +++ b/Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -40,22 +40,22 @@ #include <LUFA/Drivers/USB/USB.h> #include <avr/pgmspace.h> - + /* Macros: */ /** Endpoint number of the first CDC interface's device-to-host data IN endpoint. */ - #define CDC1_TX_EPNUM 1 + #define CDC1_TX_EPNUM 1 /** Endpoint number of the first CDC interface's host-to-device data OUT endpoint. */ - #define CDC1_RX_EPNUM 2 + #define CDC1_RX_EPNUM 2 /** Endpoint number of the first CDC interface's device-to-host notification IN endpoint. */ #define CDC1_NOTIFICATION_EPNUM 3 /** Endpoint number of the second CDC interface's device-to-host data IN endpoint. */ - #define CDC2_TX_EPNUM 4 + #define CDC2_TX_EPNUM 4 /** Endpoint number of the second CDC interface's host-to-device data OUT endpoint. */ - #define CDC2_RX_EPNUM 5 + #define CDC2_RX_EPNUM 5 /** Endpoint number of the second CDC interface's device-to-host notification IN endpoint. */ #define CDC2_NOTIFICATION_EPNUM 6 @@ -64,7 +64,7 @@ #define CDC_NOTIFICATION_EPSIZE 8 /** Size in bytes of the CDC data IN and OUT endpoints. */ - #define CDC_TXRX_EPSIZE 16 + #define CDC_TXRX_EPSIZE 16 /* Type Defines: */ /** Type define for a CDC class-specific functional header descriptor. This indicates to the host that the device @@ -89,7 +89,7 @@ uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */ uint8_t Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. */ } USB_Descriptor_CDC_FunctionalACM_t; - + /** Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific * CDC control and data interfaces are related. See the CDC class specification for more details. */ @@ -135,3 +135,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c index 67463084e..45159a8f8 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the DualVirtualSerial demo. This file contains the main tasks of the demo and * is responsible for the initial application hardware configuration. */ - + #include "DualVirtualSerial.h" /** Contains the current baud rate and other settings of the first virtual serial port. While this demo does not use @@ -69,7 +69,7 @@ CDC_Line_Coding_t LineEncoding2 = { .BaudRateBPS = 0, int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -160,14 +160,14 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { case REQ_GetLineEncoding: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { + { Endpoint_ClearSETUP(); /* Write the line coding data to the control endpoint */ - Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t)); + Endpoint_Write_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t)); Endpoint_ClearOUT(); } - + break; case REQ_SetLineEncoding: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -178,7 +178,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_Read_Control_Stream_LE(LineEncodingData, sizeof(CDC_Line_Coding_t)); Endpoint_ClearIN(); } - + break; case REQ_SetControlLineState: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -186,7 +186,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_ClearSETUP(); Endpoint_ClearStatusStage(); } - + break; } } @@ -199,7 +199,7 @@ void CDC1_Task(void) char* ReportString = NULL; uint8_t JoyStatus_LCL = Joystick_GetStatus(); static bool ActionSent = false; - + /* Device must be connected and configured for the task to run */ if (USB_DeviceState != DEVICE_STATE_Configured) return; @@ -222,26 +222,26 @@ void CDC1_Task(void) if ((ReportString != NULL) && (ActionSent == false) && LineEncoding1.BaudRateBPS) { ActionSent = true; - + /* Select the Serial Tx Endpoint */ Endpoint_SelectEndpoint(CDC1_TX_EPNUM); /* Write the String to the Endpoint */ Endpoint_Write_Stream_LE(ReportString, strlen(ReportString)); - + /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); /* Wait until the endpoint is ready for another packet */ Endpoint_WaitUntilReady(); - + /* Send an empty packet to ensure that the host does not buffer data sent to it */ Endpoint_ClearIN(); } /* Select the Serial Rx Endpoint */ Endpoint_SelectEndpoint(CDC1_RX_EPNUM); - + /* Throw away any received data from the host */ if (Endpoint_IsOUTReceived()) Endpoint_ClearOUT(); @@ -258,16 +258,16 @@ void CDC2_Task(void) /* Select the Serial Rx Endpoint */ Endpoint_SelectEndpoint(CDC2_RX_EPNUM); - + /* Check to see if any data has been received */ if (Endpoint_IsOUTReceived()) { /* Create a temp buffer big enough to hold the incoming endpoint packet */ uint8_t Buffer[Endpoint_BytesInEndpoint()]; - + /* Remember how large the incoming packet is */ uint16_t DataLength = Endpoint_BytesInEndpoint(); - + /* Read in the incoming packet into the buffer */ Endpoint_Read_Stream_LE(&Buffer, DataLength); @@ -276,7 +276,7 @@ void CDC2_Task(void) /* Select the Serial Tx Endpoint */ Endpoint_SelectEndpoint(CDC2_TX_EPNUM); - + /* Write the received data to the endpoint */ Endpoint_Write_Stream_LE(&Buffer, DataLength); @@ -290,3 +290,4 @@ void CDC2_Task(void) Endpoint_ClearIN(); } } + diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h index 6cce44c5f..b66750112 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -87,7 +87,7 @@ */ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */ } CDC_Line_Coding_t; - + /* Enums: */ /** Enum for the possible line encoding formats of a virtual serial port. */ enum CDCDevice_CDC_LineCodingFormats_t @@ -96,7 +96,7 @@ OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits */ TwoStopBits = 2, /**< Each frame contains two stop bits */ }; - + /** Enum for the possible line encoding parity settings of a virtual serial port. */ enum CDCDevice_LineCodingParity_t { @@ -116,5 +116,6 @@ void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt index 03a97cee9..2989e7adb 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt +++ b/Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Dual Communications Device Class (Dual Virtual Serial Port) Device * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -46,7 +46,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Dual Communications Device Class demonstration application. * This gives a simple reference application for implementing @@ -56,13 +56,13 @@ * descriptors for each virtual serial port, which may not be * supported in all OSes - Windows Vista is supported, as is * XP (although the latter may need a hotfix to function). - * + * * Joystick actions are transmitted to the host as strings * through the first serial port. The device does not respond to * serial data sent from the host in the first serial port. - * + * * The second serial port echoes back data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -83,3 +83,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile index bf8c8e0aa..7eb6bb44e 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/makefile +++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.c b/Demos/Device/LowLevel/GenericHID/Descriptors.c index 88388e641..440179645 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.c +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -71,22 +71,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM GenericReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204F, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -97,41 +97,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 2, - + .Class = 0x03, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_GenericHID = + .HID_GenericHID = { .Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -139,20 +139,20 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(GenericReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | GENERIC_IN_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, .PollingIntervalMS = 0x0A }, - .HID_ReportOUTEndpoint = + .HID_ReportOUTEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | GENERIC_OUT_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = GENERIC_EPSIZE, @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(21), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Generic HID Demo" }; @@ -215,38 +215,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case DTYPE_HID: + case DTYPE_HID: Address = &ConfigurationDescriptor.HID_GenericHID; Size = sizeof(USB_Descriptor_HID_t); break; - case DTYPE_Report: + case DTYPE_Report: Address = &GenericReport; Size = sizeof(GenericReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/GenericHID/Descriptors.h b/Demos/Device/LowLevel/GenericHID/Descriptors.h index a6a5e35ad..2033c27e7 100644 --- a/Demos/Device/LowLevel/GenericHID/Descriptors.h +++ b/Demos/Device/LowLevel/GenericHID/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -48,10 +48,10 @@ typedef struct { USB_Descriptor_Header_t Header; - + uint16_t HIDSpec; uint8_t CountryCode; - + uint8_t TotalReportDescriptors; uint8_t HIDReportType; @@ -73,7 +73,7 @@ USB_Descriptor_Endpoint_t HID_ReportINEndpoint; USB_Descriptor_Endpoint_t HID_ReportOUTEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Generic HID reporting IN endpoint. */ #define GENERIC_IN_EPNUM 1 @@ -83,13 +83,13 @@ /** Size in bytes of the Generic HID reporting endpoint. */ #define GENERIC_EPSIZE 8 - + /** Size in bytes of the Generic HID reports (including report ID byte). */ #define GENERIC_REPORT_SIZE 8 /** Descriptor header type value, to indicate a HID class HID descriptor. */ #define DTYPE_HID 0x21 - + /** Descriptor header type value, to indicate a HID class HID report descriptor. */ #define DTYPE_Report 0x22 @@ -100,3 +100,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.c b/Demos/Device/LowLevel/GenericHID/GenericHID.c index a72cecb45..d7c2e3728 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.c +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ static uint8_t LastReceived[GENERIC_REPORT_SIZE]; int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -128,7 +128,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_Write_Control_Stream_LE(&GenericData, sizeof(GenericData)); Endpoint_ClearOUT(); } - + break; case REQ_SetReport: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -143,7 +143,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) ProcessGenericHIDReport(GenericData); } - + break; } } @@ -159,7 +159,7 @@ void ProcessGenericHIDReport(uint8_t* DataArray) DataArray is an array holding the last report from the host. This function is called each time the host has sent a report to the device. */ - + for (uint8_t i = 0; i < GENERIC_REPORT_SIZE; i++) LastReceived[i] = DataArray[i]; } @@ -172,7 +172,7 @@ void CreateGenericHIDReport(uint8_t* DataArray) { /* This is where you need to create reports to be sent to the host from the device. This - function is called each time the host is ready to accept a new report. DataArray is + function is called each time the host is ready to accept a new report. DataArray is an array to hold the report to the host. */ @@ -187,7 +187,7 @@ void HID_Task(void) return; Endpoint_SelectEndpoint(GENERIC_OUT_EPNUM); - + /* Check to see if a packet has been sent from the host */ if (Endpoint_IsOUTReceived()) { @@ -196,26 +196,26 @@ void HID_Task(void) { /* Create a temporary buffer to hold the read in report from the host */ uint8_t GenericData[GENERIC_REPORT_SIZE]; - + /* Read Generic Report Data */ Endpoint_Read_Stream_LE(&GenericData, sizeof(GenericData)); - + /* Process Generic Report Data */ ProcessGenericHIDReport(GenericData); } /* Finalize the stream transfer to send the last packet */ Endpoint_ClearOUT(); - } + } Endpoint_SelectEndpoint(GENERIC_IN_EPNUM); - + /* Check to see if the host is ready to accept another packet */ if (Endpoint_IsINReady()) { /* Create a temporary buffer to hold the report to send to the host */ uint8_t GenericData[GENERIC_REPORT_SIZE]; - + /* Create Generic Report Data */ CreateGenericHIDReport(GenericData); @@ -226,3 +226,4 @@ void HID_Task(void) Endpoint_ClearIN(); } } + diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.h b/Demos/Device/LowLevel/GenericHID/GenericHID.h index e6e0666f4..840902e51 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.h +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for GenericHID.c. */ - + #ifndef _GENERICHID_H_ #define _GENERICHID_H_ @@ -43,13 +43,13 @@ #include <avr/interrupt.h> #include <stdbool.h> #include <string.h> - + #include "Descriptors.h" #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> - + /* Macros: */ /** HID Class specific request to get the next HID report from the device. */ #define REQ_GetReport 0x01 @@ -72,7 +72,7 @@ /* Function Prototypes: */ void SetupHardware(void); void HID_Task(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); @@ -81,5 +81,6 @@ void ProcessGenericHIDReport(uint8_t* DataArray); void CreateGenericHIDReport(uint8_t* DataArray); - + #endif + diff --git a/Demos/Device/LowLevel/GenericHID/GenericHID.txt b/Demos/Device/LowLevel/GenericHID/GenericHID.txt index b73a9512d..60920c7fb 100644 --- a/Demos/Device/LowLevel/GenericHID/GenericHID.txt +++ b/Demos/Device/LowLevel/GenericHID/GenericHID.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Generic HID Device * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Generic HID device demonstration application. This gives a simple reference application * for implementing a generic HID device, using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports * to and from a USB Host, and transmits the last sent report back to the host. - * + * * On start-up the system will automatically enumerate and function as a vendor HID device. * When controlled by a custom HID class application, reports can be sent and received by * both the standard data endpoint and control request methods defined in the HID specification. * * \section SSec_Options Project Options - * + * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> @@ -73,3 +73,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile index 8e366900d..bbcc74160 100644 --- a/Demos/Device/LowLevel/GenericHID/makefile +++ b/Demos/Device/LowLevel/GenericHID/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/Joystick/Descriptors.c b/Demos/Device/LowLevel/Joystick/Descriptors.c index 19925a9c9..08674c8d6 100644 --- a/Demos/Device/LowLevel/Joystick/Descriptors.c +++ b/Demos/Device/LowLevel/Joystick/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM JoystickReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2043, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,41 +107,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_JoystickHID = + .HID_JoystickHID = { .Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -149,15 +149,15 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(JoystickReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | JOYSTICK_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = JOYSTICK_EPSIZE, .PollingIntervalMS = 0x0A - } + } }; /** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Joystick Demo" }; @@ -215,38 +215,39 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case DTYPE_HID: + case DTYPE_HID: Address = &ConfigurationDescriptor.HID_JoystickHID; Size = sizeof(USB_Descriptor_HID_t); break; - case DTYPE_Report: + case DTYPE_Report: Address = &JoystickReport; Size = sizeof(JoystickReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/Joystick/Descriptors.h b/Demos/Device/LowLevel/Joystick/Descriptors.h index ee828fd4c..76f609715 100644 --- a/Demos/Device/LowLevel/Joystick/Descriptors.h +++ b/Demos/Device/LowLevel/Joystick/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -48,10 +48,10 @@ typedef struct { USB_Descriptor_Header_t Header; - + uint16_t HIDSpec; uint8_t CountryCode; - + uint8_t TotalReportDescriptors; uint8_t HIDReportType; @@ -72,7 +72,7 @@ USB_Descriptor_HID_t HID_JoystickHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Joystick HID reporting IN endpoint. */ #define JOYSTICK_EPNUM 1 @@ -82,7 +82,7 @@ /** Descriptor header type value, to indicate a HID class HID descriptor. */ #define DTYPE_HID 0x21 - + /** Descriptor header type value, to indicate a HID class HID report descriptor. */ #define DTYPE_Report 0x22 @@ -93,3 +93,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/Joystick/Joystick.c b/Demos/Device/LowLevel/Joystick/Joystick.c index 5aadb599c..24f744fdb 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.c +++ b/Demos/Device/LowLevel/Joystick/Joystick.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -42,7 +42,7 @@ int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -90,7 +90,7 @@ void EVENT_USB_Device_Disconnect(void) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration * of the USB device after enumeration - the device endpoints are configured and the joystick reporting task started. - */ + */ void EVENT_USB_Device_ConfigurationChanged(void) { bool ConfigSuccess = true; @@ -116,8 +116,8 @@ void EVENT_USB_Device_UnhandledControlRequest(void) if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { USB_JoystickReport_Data_t JoystickReportData; - - /* Create the next HID report to send to the host */ + + /* Create the next HID report to send to the host */ GetNextReport(&JoystickReportData); Endpoint_ClearSETUP(); @@ -126,7 +126,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_Write_Control_Stream_LE(&JoystickReportData, sizeof(JoystickReportData)); Endpoint_ClearOUT(); } - + break; } } @@ -160,10 +160,10 @@ bool GetNextReport(USB_JoystickReport_Data_t* const ReportData) if (JoyStatus_LCL & JOY_PRESS) ReportData->Button = (1 << 1); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) ReportData->Button |= (1 << 0); - + /* Check if the new report is different to the previous report */ InputChanged = (uint8_t)(PrevJoyStatus ^ JoyStatus_LCL) | (uint8_t)(PrevButtonStatus ^ ButtonStatus_LCL); @@ -181,7 +181,7 @@ void HID_Task(void) /* Device must be connected and configured for the task to run */ if (USB_DeviceState != DEVICE_STATE_Configured) return; - + /* Select the Joystick Report Endpoint */ Endpoint_SelectEndpoint(JOYSTICK_EPNUM); @@ -189,17 +189,18 @@ void HID_Task(void) if (Endpoint_IsINReady()) { USB_JoystickReport_Data_t JoystickReportData; - + /* Create the next HID report to send to the host */ GetNextReport(&JoystickReportData); - + /* Write Joystick Report Data */ Endpoint_Write_Stream_LE(&JoystickReportData, sizeof(JoystickReportData)); /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); - + /* Clear the report data afterwards */ memset(&JoystickReportData, 0, sizeof(JoystickReportData)); } } + diff --git a/Demos/Device/LowLevel/Joystick/Joystick.h b/Demos/Device/LowLevel/Joystick/Joystick.h index 607f56ec9..e1ae51228 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.h +++ b/Demos/Device/LowLevel/Joystick/Joystick.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Joystick.c. */ - + #ifndef _JOYSTICK_H_ #define _JOYSTICK_H_ @@ -66,7 +66,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Type Defines: */ /** Type define for the joystick HID report structure, for creating and sending HID reports to the host PC. * This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c. @@ -90,3 +90,4 @@ bool GetNextReport(USB_JoystickReport_Data_t* const ReportData); #endif + diff --git a/Demos/Device/LowLevel/Joystick/Joystick.txt b/Demos/Device/LowLevel/Joystick/Joystick.txt index 5b1495cbc..0a8dff697 100644 --- a/Demos/Device/LowLevel/Joystick/Joystick.txt +++ b/Demos/Device/LowLevel/Joystick/Joystick.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Joystick Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Joystick demonstration application. This gives a simple reference * application for implementing a USB Keyboard device, for USB Joysticks * using the standard Keyboard HID profile. - * + * * This device will show up as a generic joystick device, with two buttons. * Pressing the joystick inwards is the first button, and the HWB button * is the second. - * + * * Moving the joystick on the selected board moves the joystick location on * the host computer. - * + * * Currently only single interface joysticks are supported. * * \section SSec_Options Project Options @@ -71,3 +71,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile index 710ec136e..e253c56d7 100644 --- a/Demos/Device/LowLevel/Joystick/makefile +++ b/Demos/Device/LowLevel/Joystick/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/Keyboard/Descriptors.c b/Demos/Device/LowLevel/Keyboard/Descriptors.c index 69265cba9..e1a87662f 100644 --- a/Demos/Device/LowLevel/Keyboard/Descriptors.c +++ b/Demos/Device/LowLevel/Keyboard/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,14 +9,14 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,9 +31,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -88,22 +88,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2042, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -114,49 +114,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 2, - + .Class = 0x03, .SubClass = 0x01, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_KeyboardHID = - { + .HID_KeyboardHID = + { .Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID_ReportINEndpoint = + + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -166,7 +166,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x0A }, - .HID_ReportOUTEndpoint = + .HID_ReportOUTEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -184,7 +184,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -206,7 +206,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(18), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Keyboard Demo" }; @@ -228,42 +228,43 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case DTYPE_HID: + case DTYPE_HID: Address = &ConfigurationDescriptor.HID_KeyboardHID; Size = sizeof(USB_Descriptor_HID_t); break; - case DTYPE_Report: + case DTYPE_Report: Address = &KeyboardReport; Size = sizeof(KeyboardReport); break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/Keyboard/Descriptors.h b/Demos/Device/LowLevel/Keyboard/Descriptors.h index 815381bb7..0ee13a4e4 100644 --- a/Demos/Device/LowLevel/Keyboard/Descriptors.h +++ b/Demos/Device/LowLevel/Keyboard/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,14 +9,14 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -45,20 +45,20 @@ /* Type Defines: */ /** Type define for the HID class specific HID descriptor, to describe the HID device's specifications. Refer to the HID * specification for details on the structure elements. - */ + */ typedef struct { USB_Descriptor_Header_t Header; - + uint16_t HIDSpec; uint8_t CountryCode; - + uint8_t TotalReportDescriptors; uint8_t HIDReportType; uint16_t HIDReportLength; } USB_Descriptor_HID_t; - + /** Type define for the data type used to store HID report descriptor elements. */ typedef uint8_t USB_Descriptor_HIDReport_Datatype_t; @@ -74,20 +74,20 @@ USB_Descriptor_Endpoint_t HID_ReportINEndpoint; USB_Descriptor_Endpoint_t HID_ReportOUTEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_IN_EPNUM 1 /** Endpoint number of the Keyboard HID reporting OUT endpoint. */ #define KEYBOARD_OUT_EPNUM 2 - - /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ + + /** Size in bytes of the Keyboard HID reporting IN and OUT endpoints. */ #define KEYBOARD_EPSIZE 8 /** Descriptor header type value, to indicate a HID class HID descriptor. */ #define DTYPE_HID 0x21 - + /** Descriptor header type value, to indicate a HID class HID report descriptor. */ #define DTYPE_Report 0x22 @@ -98,3 +98,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.c b/Demos/Device/LowLevel/Keyboard/Keyboard.c index b4d4c2137..9d187f850 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.c +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * Main source file for the Keyboard demo. This file contains the main tasks of the demo and * is responsible for the initial application hardware configuration. */ - + #include "Keyboard.h" /** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot @@ -48,7 +48,7 @@ bool UsingReportProtocol = true; uint16_t IdleCount = 500; /** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle - * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request + * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request * the current idle period via a Get Idle HID class request, thus its value must be preserved. */ uint16_t IdleMSRemaining = 0; @@ -60,7 +60,7 @@ uint16_t IdleMSRemaining = 0; int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -113,7 +113,7 @@ void EVENT_USB_Device_Disconnect(void) * of the USB device after enumeration, and configures the keyboard device endpoints. */ void EVENT_USB_Device_ConfigurationChanged(void) -{ +{ bool ConfigSuccess = true; /* Setup HID Report Endpoints */ @@ -126,7 +126,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) USB_Device_EnableSOFEvents(); /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific @@ -152,13 +152,13 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_Write_Control_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData)); Endpoint_ClearOUT(); } - + break; case REQ_SetReport: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); - + /* Wait until the LED report has been sent by the host */ while (!(Endpoint_IsOUTReceived())) { @@ -175,20 +175,20 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Process the incoming LED report */ ProcessLEDReport(LEDStatus); } - + break; case REQ_GetProtocol: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); - + /* Write the current protocol flag to the host */ Endpoint_Write_Byte(UsingReportProtocol); Endpoint_ClearIN(); Endpoint_ClearStatusStage(); } - + break; case REQ_SetProtocol: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -199,26 +199,26 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Set or clear the flag depending on what the host indicates that the current Protocol should be */ UsingReportProtocol = (USB_ControlRequest.wValue != 0); } - + break; case REQ_SetIdle: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { - Endpoint_ClearSETUP(); + Endpoint_ClearSETUP(); Endpoint_ClearStatusStage(); /* Get idle period in MSB, IdleCount must be multiplied by 4 to get number of milliseconds */ IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6); } - + break; case REQ_GetIdle: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { + { Endpoint_ClearSETUP(); - + /* Write the current idle duration to the host, must be divided by 4 before sent to host */ - Endpoint_Write_Byte(IdleCount >> 2); + Endpoint_Write_Byte(IdleCount >> 2); Endpoint_ClearIN(); Endpoint_ClearStatusStage(); @@ -249,10 +249,10 @@ void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData) /* Clear the report contents */ memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t)); - + /* Make sent key uppercase by indicating that the left shift key is pressed */ ReportData->Modifier = KEYBOARD_MODIFER_LEFTSHIFT; - + if (JoyStatus_LCL & JOY_UP) ReportData->KeyCode[UsedKeyCodes++] = 0x04; // A else if (JoyStatus_LCL & JOY_DOWN) @@ -265,7 +265,7 @@ void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData) if (JoyStatus_LCL & JOY_PRESS) ReportData->KeyCode[UsedKeyCodes++] = 0x08; // E - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) ReportData->KeyCode[UsedKeyCodes++] = 0x09; // F } @@ -277,10 +277,10 @@ void CreateKeyboardReport(USB_KeyboardReport_Data_t* const ReportData) void ProcessLEDReport(const uint8_t LEDReport) { uint8_t LEDMask = LEDS_LED2; - + if (LEDReport & KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (LEDReport & KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; @@ -297,23 +297,23 @@ void SendNextReport(void) static USB_KeyboardReport_Data_t PrevKeyboardReportData; USB_KeyboardReport_Data_t KeyboardReportData; bool SendReport = true; - + /* Create the next keyboard report for transmission to the host */ CreateKeyboardReport(&KeyboardReportData); - + /* Check to see if the report data has changed - if so a report MUST be sent */ SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0); - + /* Check if the idle period is set and has elapsed */ if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining))) { /* Reset the idle time remaining counter */ IdleMSRemaining = IdleCount; - + /* Idle period is set and has elapsed, must send a report to the host */ SendReport = true; } - + /* Select the Keyboard Report Endpoint */ Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); @@ -322,10 +322,10 @@ void SendNextReport(void) { /* Save the current report data for later comparison to check for changes */ PrevKeyboardReportData = KeyboardReportData; - + /* Write Keyboard Report Data */ Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData)); - + /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); } @@ -361,10 +361,11 @@ void HID_Task(void) /* Device must be connected and configured for the task to run */ if (USB_DeviceState != DEVICE_STATE_Configured) return; - + /* Send the next keypress report to the host */ SendNextReport(); - + /* Process the LED report sent from the host */ ReceiveNextReport(); } + diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.h b/Demos/Device/LowLevel/Keyboard/Keyboard.h index e5904b8d6..06526566c 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.h +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -10,13 +10,13 @@ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -101,7 +101,7 @@ /** Constant for a keyboard output report LED byte, indicating that the host's NUM LOCK mode is currently set. */ #define KEYBOARD_LED_NUMLOCK (1 << 0) - + /** Constant for a keyboard output report LED byte, indicating that the host's CAPS LOCK mode is currently set. */ #define KEYBOARD_LED_CAPSLOCK (1 << 1) @@ -110,7 +110,7 @@ /** Constant for a keyboard output report LED byte, indicating that the host's KATANA mode is currently set. */ #define KEYBOARD_LED_KATANA (1 << 3) - + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -133,11 +133,11 @@ uint8_t Reserved; /**< Reserved, always set as 0x00 */ uint8_t KeyCode[6]; /**< Array of up to six simultaneous key codes of pressed keys */ } USB_KeyboardReport_Data_t; - + /* Function Prototypes: */ void SetupHardware(void); void HID_Task(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); @@ -150,3 +150,4 @@ void ReceiveNextReport(void); #endif + diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.txt b/Demos/Device/LowLevel/Keyboard/Keyboard.txt index 49e990f24..54d86d3a7 100644 --- a/Demos/Device/LowLevel/Keyboard/Keyboard.txt +++ b/Demos/Device/LowLevel/Keyboard/Keyboard.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -50,8 +50,8 @@ * for implementing a USB Keyboard using the basic USB HID drivers in all modern * OSes (i.e. no special drivers required). It is boot protocol compatible, and thus * works under compatible BIOS as if it was a native keyboard (e.g. PS/2). - * - * On start-up the system will automatically enumerate and function as a keyboard + * + * On start-up the system will automatically enumerate and function as a keyboard * when the USB connection to a host is present. To use the keyboard example, * manipulate the joystick to send the letters a, b, c, d and e. See the USB HID * documentation for more information on sending keyboard event and key presses. Unlike @@ -59,7 +59,7 @@ * inside the same report to the host. * * \section SSec_Options Project Options - * + * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. * * <table> @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile index f46afabc4..c78388099 100644 --- a/Demos/Device/LowLevel/Keyboard/makefile +++ b/Demos/Device/LowLevel/Keyboard/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c index 642b8e904..b04dccdf8 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c +++ b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,14 +9,14 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,9 +31,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -121,22 +121,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204D, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -147,49 +147,49 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID1_KeyboardInterface = + + .HID1_KeyboardInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 2, - + .Class = 0x03, .SubClass = 0x01, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID1_KeyboardHID = - { + .HID1_KeyboardHID = + { .Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = DTYPE_Report, .HIDReportLength = sizeof(KeyboardReport) }, - - .HID1_ReportINEndpoint = + + .HID1_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -199,7 +199,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x0A }, - .HID1_ReportOUTEndpoint = + .HID1_ReportOUTEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -209,34 +209,34 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x0A }, - .HID2_MouseInterface = + .HID2_MouseInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x01, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = 0x02, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID2_MouseHID = - { + .HID2_MouseHID = + { .Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, .HIDReportType = DTYPE_Report, .HIDReportLength = sizeof(MouseReport) }, - - .HID2_ReportINEndpoint = + + .HID2_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -254,7 +254,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -265,7 +265,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -276,7 +276,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(28), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse and Keyboard Demo" }; @@ -298,33 +298,33 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case DTYPE_HID: + case DTYPE_HID: if (!(wIndex)) { Address = &ConfigurationDescriptor.HID1_KeyboardHID; @@ -333,24 +333,25 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, else { Address = &ConfigurationDescriptor.HID2_MouseHID; - Size = sizeof(USB_Descriptor_HID_t); + Size = sizeof(USB_Descriptor_HID_t); } break; - case DTYPE_Report: + case DTYPE_Report: if (!(wIndex)) { Address = &KeyboardReport; Size = sizeof(KeyboardReport); } else - { + { Address = &MouseReport; Size = sizeof(MouseReport); } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h index 8005d5ad3..908591c26 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h +++ b/Demos/Device/LowLevel/KeyboardMouse/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,14 +9,14 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -49,10 +49,10 @@ typedef struct { USB_Descriptor_Header_t Header; - + uint16_t HIDSpec; uint8_t CountryCode; - + uint8_t TotalReportDescriptors; uint8_t HIDReportType; @@ -77,7 +77,7 @@ USB_Descriptor_HID_t HID2_MouseHID; USB_Descriptor_Endpoint_t HID2_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Keyboard HID reporting IN endpoint. */ #define KEYBOARD_IN_EPNUM 1 @@ -93,7 +93,7 @@ /** Descriptor header type value, to indicate a HID class HID descriptor. */ #define DTYPE_HID 0x21 - + /** Descriptor header type value, to indicate a HID class HID report descriptor. */ #define DTYPE_Report 0x22 @@ -104,3 +104,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c index 2f4bd76cf..678957378 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,14 +9,14 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * Main source file for the KeyboardMouse demo. This file contains the main tasks of the demo and * is responsible for the initial application hardware configuration. */ - + #include "KeyboardMouse.h" /** Global structure to hold the current keyboard interface HID report, for transmission to the host */ @@ -50,7 +50,7 @@ USB_MouseReport_Data_t MouseReportData; int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -114,7 +114,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) HID_EPSIZE, ENDPOINT_BANK_SINGLE); /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific @@ -133,7 +133,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); - + /* Determine if it is the mouse or the keyboard data that is being requested */ if (!(USB_ControlRequest.wIndex)) { @@ -153,13 +153,13 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Clear the report data afterwards */ memset(ReportData, 0, ReportSize); } - + break; case REQ_SetReport: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); - + /* Wait until the LED report has been sent by the host */ while (!(Endpoint_IsOUTReceived())) { @@ -176,7 +176,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Process the incoming LED report */ Keyboard_ProcessLEDReport(LEDStatus); } - + break; } } @@ -189,10 +189,10 @@ void EVENT_USB_Device_UnhandledControlRequest(void) void Keyboard_ProcessLEDReport(const uint8_t LEDStatus) { uint8_t LEDMask = LEDS_LED2; - + if (LEDStatus & KEYBOARD_LED_NUMLOCK) LEDMask |= LEDS_LED1; - + if (LEDStatus & KEYBOARD_LED_CAPSLOCK) LEDMask |= LEDS_LED3; @@ -256,7 +256,7 @@ void Keyboard_HID_Task(void) /* Check if Keyboard LED Endpoint Ready for Read/Write */ if (Endpoint_IsReadWriteAllowed()) - { + { /* Read in and process the LED report from the host */ Keyboard_ProcessLEDReport(Endpoint_Read_Byte()); @@ -309,3 +309,4 @@ void Mouse_HID_Task(void) memset(&MouseReportData, 0, sizeof(MouseReportData)); } } + diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h index 565fa57ac..40572992d 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,14 +9,14 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this + + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -47,7 +47,7 @@ #include <LUFA/Drivers/Board/Joystick.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Buttons.h> - + /* Macros: */ /** HID Class specific request to get the next HID report from the device. */ #define REQ_GetReport 0x01 @@ -87,7 +87,7 @@ /** Constant for a keyboard output report LED byte, indicating that the host's NUM LOCK mode is currently set. */ #define KEYBOARD_LED_NUMLOCK (1 << 0) - + /** Constant for a keyboard output report LED byte, indicating that the host's CAPS LOCK mode is currently set. */ #define KEYBOARD_LED_CAPSLOCK (1 << 1) @@ -108,7 +108,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Type Defines: */ /** Type define for the keyboard HID report structure, for creating and sending HID reports to the host PC. * This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c. @@ -129,17 +129,18 @@ int8_t X; /**< Current mouse delta X movement, as a signed 8-bit integer */ int8_t Y; /**< Current mouse delta Y movement, as a signed 8-bit integer */ } USB_MouseReport_Data_t; - + /* Function Prototypes: */ void SetupHardware(void); void Keyboard_ProcessLEDReport(const uint8_t LEDStatus); void Keyboard_HID_Task(void); void Mouse_HID_Task(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); void EVENT_USB_Device_StartOfFrame(void); - + #endif + diff --git a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt index f13087885..984493056 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt +++ b/Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Dual HID Keyboard and Mouse Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,7 +44,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard/Mouse demonstration application. This gives a simple reference * application for implementing a composite device containing both USB Keyboard @@ -52,13 +52,13 @@ * (i.e. no special drivers required). This example uses two separate HID * interfaces for each function. It is boot protocol compatible, and thus works under * compatible BIOS as if it was a native keyboard and mouse (e.g. PS/2). - * + * * On start-up the system will automatically enumerate and function * as a keyboard when the USB connection to a host is present and the HWB is not * pressed. When enabled, manipulate the joystick to send the letters * a, b, c, d and e. See the USB HID documentation for more information * on sending keyboard event and key presses. - * + * * When the HWB is pressed, the mouse mode is enabled. When enabled, move the * joystick to move the pointer, and push the joystick inwards to simulate a * left-button click. @@ -75,3 +75,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile index 3898c8209..d3527c790 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/makefile +++ b/Demos/Device/LowLevel/KeyboardMouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/MIDI/Descriptors.c b/Demos/Device/LowLevel/MIDI/Descriptors.c index 3c2efdbd9..5640c67ca 100644 --- a/Demos/Device/LowLevel/MIDI/Descriptors.c +++ b/Demos/Device/LowLevel/MIDI/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2048, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,122 +80,122 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - - .InterfaceStrIndex = NO_DESCRIPTOR + + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_AudioHeader, - + .AudioSpecification = VERSION_BCD(01.00), .TotalLength = sizeof(USB_Audio_Interface_AC_t), - + .InCollection = 1, - .InterfaceNumbers = {1}, + .InterfaceNumbers = {1}, }, - .Audio_StreamInterface = + .Audio_StreamInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x01, .SubClass = 0x03, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Interface_MIDI_AS_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_General, .AudioSpecification = VERSION_BCD(01.00), - + .TotalLength = (sizeof(USB_Descriptor_Configuration_t) - offsetof(USB_Descriptor_Configuration_t, Audio_StreamInterface_SPC)) }, - .MIDI_In_Jack_Emb = + .MIDI_In_Jack_Emb = { .Header = {.Size = sizeof(USB_MIDI_In_Jack_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_InputJack, - + .JackType = JACKTYPE_EMBEDDED, .JackID = 0x01, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_In_Jack_Ext = + .MIDI_In_Jack_Ext = { .Header = {.Size = sizeof(USB_MIDI_In_Jack_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_InputJack, - + .JackType = JACKTYPE_EXTERNAL, .JackID = 0x02, - + .JackStrIndex = NO_DESCRIPTOR }, - - .MIDI_Out_Jack_Emb = + + .MIDI_Out_Jack_Emb = { .Header = {.Size = sizeof(USB_MIDI_Out_Jack_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_OutputJack, - + .JackType = JACKTYPE_EMBEDDED, .JackID = 0x03, .NumberOfPins = 1, .SourceJackID = {0x02}, .SourcePinID = {0x01}, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_Out_Jack_Ext = + .MIDI_Out_Jack_Ext = { .Header = {.Size = sizeof(USB_MIDI_Out_Jack_t), .Type = DTYPE_CSInterface}, .Subtype = DSUBTYPE_OutputJack, - + .JackType = JACKTYPE_EXTERNAL, .JackID = 0x04, .NumberOfPins = 1, .SourceJackID = {0x01}, .SourcePinID = {0x01}, - + .JackStrIndex = NO_DESCRIPTOR }, - .MIDI_In_Jack_Endpoint = + .MIDI_In_Jack_Endpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -204,12 +204,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .MIDI_In_Jack_Endpoint_SPC = + + .MIDI_In_Jack_Endpoint_SPC = { .Header = {.Size = sizeof(USB_MIDI_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint}, .Subtype = DSUBTYPE_General, @@ -218,9 +218,9 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .AssociatedJackID = {0x01} }, - .MIDI_Out_Jack_Endpoint = + .MIDI_Out_Jack_Endpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -229,12 +229,12 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = MIDI_STREAM_EPSIZE, .PollingIntervalMS = 0 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .MIDI_Out_Jack_Endpoint_SPC = + + .MIDI_Out_Jack_Endpoint_SPC = { .Header = {.Size = sizeof(USB_MIDI_Jack_Endpoint_t), .Type = DTYPE_CSEndpoint}, .Subtype = DSUBTYPE_General, @@ -251,7 +251,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -262,7 +262,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -273,7 +273,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(14), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA MIDI Demo" }; @@ -295,34 +295,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/MIDI/Descriptors.h b/Demos/Device/LowLevel/MIDI/Descriptors.h index e110cc2e6..abaabb731 100644 --- a/Demos/Device/LowLevel/MIDI/Descriptors.h +++ b/Demos/Device/LowLevel/MIDI/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -59,7 +59,7 @@ /** Audio class descriptor jack type value for an external (physical) MIDI input or output jack. */ #define JACKTYPE_EXTERNAL 0x02 - + /** Endpoint number of the MIDI streaming data IN endpoint, for device-to-host data transfers. */ #define MIDI_STREAM_IN_EPNUM 1 @@ -68,7 +68,7 @@ /** Endpoint size in bytes of the Audio isochronous streaming data IN and OUT endpoints. */ #define MIDI_STREAM_EPSIZE 64 - + /* Type Defines: */ /** Type define for an Audio class specific interface descriptor. This follows a regular interface descriptor to * supply extra information about the audio device's layout to the host. See the USB Audio specification for more @@ -81,11 +81,11 @@ uint16_t AudioSpecification; /**< Binary coded decimal value, indicating the supported Audio Class specification version */ uint16_t TotalLength; /**< Total length of the Audio class specific control descriptors, including this descriptor */ - + uint8_t InCollection; /**< Total number of audio class interfaces within this device */ uint8_t InterfaceNumbers[1]; /**< Interface numbers of each audio interface */ } USB_Audio_Interface_AC_t; - + /** Type define for an Audio class specific MIDI streaming interface descriptor. This indicates to the host * how MIDI the specification compliance of the device and the total length of the Audio class specific descriptors. * See the USB Audio specification for more details. @@ -94,12 +94,12 @@ { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ uint8_t Subtype; /**< Sub type value used to distinguish between audio class specific descriptors */ - + uint16_t AudioSpecification; /**< Binary coded decimal value, indicating the supported Audio Class specification version */ uint16_t TotalLength; /**< Total length of the Audio class specific descriptors, including this descriptor */ } USB_Audio_Interface_MIDI_AS_t; - - /** Type define for an Audio class specific endpoint descriptor. This contains a regular endpoint + + /** Type define for an Audio class specific endpoint descriptor. This contains a regular endpoint * descriptor with a few Audio-class specific extensions. See the USB Audio specification for more details. */ typedef struct @@ -120,7 +120,7 @@ uint8_t JackType; /**< Type of jack, one of the JACKTYPE_* mask values */ uint8_t JackID; /**< ID value of this jack - must be a unique value within the device */ - + uint8_t JackStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_MIDI_In_Jack_t; @@ -134,14 +134,14 @@ uint8_t JackType; /**< Type of jack, one of the JACKTYPE_* mask values */ uint8_t JackID; /**< ID value of this jack - must be a unique value within the device */ - + uint8_t NumberOfPins; /**< Number of output channels within the jack, either physical or logical */ uint8_t SourceJackID[1]; /**< ID of each output pin's source data jack */ uint8_t SourcePinID[1]; /**< Pin number in the input jack of each output pin's source data */ - + uint8_t JackStrIndex; /**< Index of a string descriptor describing this descriptor within the device */ } USB_MIDI_Out_Jack_t; - + /** Type define for an Audio class specific extended MIDI jack endpoint descriptor. This contains extra information * on the usage of MIDI endpoints used to stream MIDI events in and out of the USB Audio device, and follows an Audio * class specific extended MIDI endpoint descriptor. See the USB Audio specification for more details. @@ -175,7 +175,7 @@ USB_Audio_StreamEndpoint_Std_t MIDI_Out_Jack_Endpoint; USB_MIDI_Jack_Endpoint_t MIDI_Out_Jack_Endpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -183,3 +183,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/MIDI/MIDI.c b/Demos/Device/LowLevel/MIDI/MIDI.c index 87ecbd4d0..4696d2336 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.c +++ b/Demos/Device/LowLevel/MIDI/MIDI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -42,10 +42,10 @@ int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { MIDI_Task(); @@ -62,7 +62,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ Joystick_Init(); LEDs_Init(); @@ -100,7 +100,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) MIDI_STREAM_EPSIZE, ENDPOINT_BANK_SINGLE); /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Task to handle the generation of MIDI note change events in response to presses of the board joystick, and send them @@ -120,10 +120,10 @@ void MIDI_Task(void) { uint8_t MIDICommand = 0; uint8_t MIDIPitch; - + uint8_t JoystickStatus = Joystick_GetStatus(); uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus); - + /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1)); @@ -144,7 +144,7 @@ void MIDI_Task(void) MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3E; } - + if (JoystickChanges & JOY_DOWN) { MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); @@ -164,19 +164,19 @@ void MIDI_Task(void) { .CableNumber = 0, .Command = (MIDICommand >> 4), - + .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, - .Data3 = MIDI_STANDARD_VELOCITY, + .Data3 = MIDI_STANDARD_VELOCITY, }; - + /* Write the MIDI event packet to the endpoint */ Endpoint_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent)); - + /* Send the data in the endpoint to the host */ Endpoint_ClearIN(); } - + /* Save previous joystick value for next joystick change detection */ PrevJoystickStatus = JoystickStatus; } @@ -188,10 +188,10 @@ void MIDI_Task(void) if (Endpoint_IsOUTReceived()) { USB_MIDI_EventPacket_t MIDIEvent; - + /* Read the MIDI event packet from the endpoint */ Endpoint_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent)); - + /* Check to see if the sent command is a note on message with a non-zero velocity */ if ((MIDIEvent.Command == (MIDI_COMMAND_NOTE_ON >> 4)) && (MIDIEvent.Data3 > 0)) { @@ -203,8 +203,9 @@ void MIDI_Task(void) /* Turn off all LEDs in response to non Note On messages */ LEDs_SetAllLEDs(LEDS_NO_LEDS); } - + /* Clear the endpoint ready for new packet */ Endpoint_ClearOUT(); } } + diff --git a/Demos/Device/LowLevel/MIDI/MIDI.h b/Demos/Device/LowLevel/MIDI/MIDI.h index 75ac8458e..e2f39f3bd 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.h +++ b/Demos/Device/LowLevel/MIDI/MIDI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for AudioOutput.c. */ - + #ifndef _AUDIO_OUTPUT_H_ #define _AUDIO_OUTPUT_H_ @@ -44,7 +44,7 @@ #include <stdbool.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/Joystick.h> @@ -60,7 +60,7 @@ /** Standard key press velocity value used for all note events, as no pressure sensor is mounted. */ #define MIDI_STANDARD_VELOCITY 64 - + /** Convenience macro. MIDI channels are numbered from 1-10 (natural numbers) however the logical channel * addresses are zero-indexed. This converts a natural MIDI channel number into the logical channel address. * @@ -86,18 +86,19 @@ { unsigned char Command : 4; /**< MIDI command being sent or received in the event packet */ unsigned char CableNumber : 4; /**< Virtual cable number of the event being sent or received in the given MIDI interface */ - + uint8_t Data1; /**< First byte of data in the MIDI event */ uint8_t Data2; /**< Second byte of data in the MIDI event */ - uint8_t Data3; /**< Third byte of data in the MIDI event */ + uint8_t Data3; /**< Third byte of data in the MIDI event */ } USB_MIDI_EventPacket_t; - + /* Function Prototypes: */ void SetupHardware(void); void MIDI_Task(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); - + #endif + diff --git a/Demos/Device/LowLevel/MIDI/MIDI.txt b/Demos/Device/LowLevel/MIDI/MIDI.txt index e9522f2ed..0629832b2 100644 --- a/Demos/Device/LowLevel/MIDI/MIDI.txt +++ b/Demos/Device/LowLevel/MIDI/MIDI.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage MIDI Input Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -44,19 +44,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * MIDI demonstration application. This gives a simple reference * application for implementing the USB-MIDI class in USB devices. * It is built upon the USB Audio class. - * + * * Joystick movements are translated into note on/off messages and * are sent to the host PC as MIDI streams which can be read by any * MIDI program supporting MIDI IN devices. - * + * * If the HWB is not pressed, channel 1 (default piano) is used. If * the HWB is set, then channel 10 (default percussion) is selected. - * + * * This device implements MIDI-THRU mode, with the IN MIDI data being * generated by the device itself. OUT MIDI data is discarded. * @@ -72,3 +72,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile index 4bdf98462..6cc229ddb 100644 --- a/Demos/Device/LowLevel/MIDI/makefile +++ b/Demos/Device/LowLevel/MIDI/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.c b/Demos/Device/LowLevel/MassStorage/Descriptors.c index b6e03a359..d06161049 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.c +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2045, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,38 +83,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED, - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .MS_Interface = + + .MS_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x08, .SubClass = 0x06, .Protocol = 0x50, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .MS_DataInEndpoint = + .MS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -124,7 +124,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .PollingIntervalMS = 0x00 }, - .MS_DataOutEndpoint = + .MS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -142,7 +142,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -153,7 +153,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -164,7 +164,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mass Storage Demo" }; @@ -186,34 +186,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, switch (DescriptorType) { - case DTYPE_Device: + case DTYPE_Device: Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/MassStorage/Descriptors.h b/Demos/Device/LowLevel/MassStorage/Descriptors.h index b2989f1bc..6f3dbd4b4 100644 --- a/Demos/Device/LowLevel/MassStorage/Descriptors.h +++ b/Demos/Device/LowLevel/MassStorage/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -43,15 +43,15 @@ /* Macros: */ /** Endpoint number of the Mass Storage device-to-host data IN endpoint. */ - #define MASS_STORAGE_IN_EPNUM 3 + #define MASS_STORAGE_IN_EPNUM 3 /** Endpoint number of the Mass Storage host-to-device data OUT endpoint. */ - #define MASS_STORAGE_OUT_EPNUM 4 + #define MASS_STORAGE_OUT_EPNUM 4 /** Size in bytes of the Mass Storage data endpoints. */ #define MASS_STORAGE_IO_EPSIZE 64 - - /* Type Defines: */ + + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which * vary between devices, and which describe the device's usage to the host. @@ -63,7 +63,7 @@ USB_Descriptor_Endpoint_t MS_DataInEndpoint; USB_Descriptor_Endpoint_t MS_DataOutEndpoint; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -71,3 +71,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c index e32618258..09274e1cd 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c +++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -71,11 +71,11 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, /* Wait until endpoint is ready before continuing */ if (Endpoint_WaitUntilReady()) return; - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -84,7 +84,7 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, { /* Clear the current endpoint bank */ Endpoint_ClearOUT(); - + /* Wait until the host has sent another packet */ if (Endpoint_WaitUntilReady()) return; @@ -123,7 +123,7 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, /* Send the Dataflash buffer write command */ Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); + Dataflash_SendAddressBytes(0, 0); } /* Write one 16-byte chunk of data to the Dataflash */ @@ -143,7 +143,7 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); Dataflash_SendByte(Endpoint_Read_Byte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; @@ -152,9 +152,9 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, /* Check if the current command is being aborted by the host */ if (IsMassStoreReset) - return; + return; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -197,15 +197,15 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - + /* Wait until endpoint is ready before continuing */ if (Endpoint_WaitUntilReady()) return; - + while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -214,12 +214,12 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, { /* Clear the endpoint bank to send its contents to the host */ Endpoint_ClearIN(); - + /* Wait until the endpoint is ready for more data */ if (Endpoint_WaitUntilReady()) return; } - + /* Check if end of Dataflash page reached */ if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) { @@ -229,7 +229,7 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -237,7 +237,7 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ Endpoint_Write_Byte(Dataflash_ReceiveByte()); @@ -256,10 +256,10 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); Endpoint_Write_Byte(Dataflash_ReceiveByte()); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; @@ -267,11 +267,11 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, if (IsMassStoreReset) return; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } - + /* If the endpoint is full, send its contents to the host */ if (!(Endpoint_IsReadWriteAllowed())) Endpoint_ClearIN(); @@ -315,7 +315,7 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -355,18 +355,18 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(DF_CMD_BUFF1WRITE); Dataflash_SendAddressBytes(0, 0); } - + /* Write one 16-byte chunk of data to the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) Dataflash_SendByte(*(BufferPtr++)); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; + BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter and reset the sub block counter */ TotalBlocks--; } @@ -412,7 +412,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, while (TotalBlocks) { uint8_t BytesInBlockDiv16 = 0; - + /* Write an endpoint packet sized data block to the Dataflash */ while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) { @@ -425,7 +425,7 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, /* Select the next Dataflash chip based on the new Dataflash page index */ Dataflash_SelectChipFromPage(CurrDFPage); - + /* Send the Dataflash main memory page read command */ Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); Dataflash_SendAddressBytes(CurrDFPage, 0); @@ -433,19 +433,19 @@ void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); Dataflash_SendByte(0x00); - } + } /* Read one 16-byte chunk of data from the Dataflash */ for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) *(BufferPtr++) = Dataflash_ReceiveByte(); - + /* Increment the Dataflash page 16 byte block counter */ CurrDFPageByteDiv16++; - + /* Increment the block 16 byte block counter */ BytesInBlockDiv16++; } - + /* Decrement the blocks remaining counter */ TotalBlocks--; } @@ -460,7 +460,7 @@ void DataflashManager_ResetDataflashProtections(void) /* Select first Dataflash chip, send the read status register command */ Dataflash_SelectChip(DATAFLASH_CHIP1); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -472,12 +472,12 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } - + /* Select second Dataflash chip (if present on selected board), send read status register command */ #if (DATAFLASH_TOTALCHIPS == 2) Dataflash_SelectChip(DATAFLASH_CHIP2); Dataflash_SendByte(DF_CMD_GETSTATUS); - + /* Check if sector protection is enabled */ if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) { @@ -490,7 +490,7 @@ void DataflashManager_ResetDataflashProtections(void) Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); } #endif - + /* Deselect current Dataflash chip */ Dataflash_DeselectChip(); } @@ -524,6 +524,7 @@ bool DataflashManager_CheckDataflashOperation(void) if (ReturnByte != DF_MANUFACTURER_ATMEL) return false; #endif - + return true; } + diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h index cb613f42c..935f41189 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,13 +32,13 @@ * * Header file for DataflashManager.c. */ - + #ifndef _DATAFLASH_MANAGER_H_ #define _DATAFLASH_MANAGER_H_ /* Includes: */ #include <avr/io.h> - + #include "MassStorage.h" #include "Descriptors.h" @@ -59,20 +59,20 @@ * storage media (Dataflash) using a different native block size. Do not change this value. */ #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - + /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - + /** Total number of Logical Units (drives) in the device. The total device capacity is shared equally between * each drive - this can be set to any positive non-zero amount. */ #define TOTAL_LUNS 1 - + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - + #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) + /* Function Prototypes: */ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, uint16_t TotalBlocks); @@ -86,5 +86,6 @@ uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); void DataflashManager_ResetDataflashProtections(void); bool DataflashManager_CheckDataflashOperation(void); - + #endif + diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c index 76005952f..bf961b7ed 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c +++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,29 +34,29 @@ * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, * which wrap around standard SCSI device commands for controlling the actual storage medium. */ - + #define INCLUDE_FROM_SCSI_C #include "SCSI.h" /** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's * features and capabilities. */ -SCSI_Inquiry_Response_t InquiryData = +SCSI_Inquiry_Response_t InquiryData = { .DeviceType = DEVICE_TYPE_BLOCK, .PeripheralQualifier = 0, - + .Removable = true, - + .Version = 0, - + .ResponseDataFormat = 2, .NormACA = false, .TrmTsk = false, .AERC = false, .AdditionalLength = 0x1F, - + .SoftReset = false, .CmdQue = false, .Linked = false, @@ -64,7 +64,7 @@ SCSI_Inquiry_Response_t InquiryData = .WideBus16Bit = false, .WideBus32Bit = false, .RelAddr = false, - + .VendorID = "LUFA", .ProductID = "Dataflash Disk", .RevisionID = {'0','.','0','0'}, @@ -94,13 +94,13 @@ bool SCSI_DecodeSCSICommand(void) switch (CommandBlock.SCSICommandData[0]) { case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(); + CommandSuccess = SCSI_Command_Inquiry(); break; case SCSI_CMD_REQUEST_SENSE: CommandSuccess = SCSI_Command_Request_Sense(); break; case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(); + CommandSuccess = SCSI_Command_Read_Capacity_10(); break; case SCSI_CMD_SEND_DIAGNOSTIC: CommandSuccess = SCSI_Command_Send_Diagnostic(); @@ -125,14 +125,14 @@ bool SCSI_DecodeSCSICommand(void) SCSI_ASENSEQ_NO_QUALIFIER); break; } - + /* Check if command was successfully processed */ if (CommandSuccess) { SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, SCSI_ASENSEQ_NO_QUALIFIER); - + return true; } @@ -166,7 +166,7 @@ static bool SCSI_Command_Inquiry(void) Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, StreamCallback_AbortOnMassStoreReset); uint8_t PadBytes[AllocationLength - BytesTransferred]; - + /* Pad out remaining bytes with 0x00 */ Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), StreamCallback_AbortOnMassStoreReset); @@ -175,7 +175,7 @@ static bool SCSI_Command_Inquiry(void) /* Succeed the command and update the bytes transferred counter */ CommandBlock.DataTransferLength -= BytesTransferred; - + return true; } @@ -188,12 +188,12 @@ static bool SCSI_Command_Request_Sense(void) { uint8_t AllocationLength = CommandBlock.SCSICommandData[4]; uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData); - + /* Send the SENSE data - this indicates to the host the status of the last command */ Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, StreamCallback_AbortOnMassStoreReset); - + uint8_t PadBytes[AllocationLength - BytesTransferred]; - + /* Pad out remaining bytes with 0x00 */ Endpoint_Write_Stream_LE(&PadBytes, sizeof(PadBytes), StreamCallback_AbortOnMassStoreReset); @@ -228,7 +228,7 @@ static bool SCSI_Command_Read_Capacity_10(void) /* Succeed the command and update the bytes transferred counter */ CommandBlock.DataTransferLength -= 8; - + return true; } @@ -250,21 +250,21 @@ static bool SCSI_Command_Send_Diagnostic(void) return false; } - + /* Check to see if all attached Dataflash ICs are functional */ if (!(DataflashManager_CheckDataflashOperation())) { /* Update SENSE key with a hardware error condition and return command fail */ SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - + SCSI_ASENSEQ_NO_QUALIFIER); + return false; } - + /* Succeed the command and update the bytes transferred counter */ CommandBlock.DataTransferLength = 0; - + return true; } @@ -296,7 +296,7 @@ static bool SCSI_Command_ReadWrite_10(const bool IsDataRead) /* Adjust the given block address to the real media address based on the selected LUN */ BlockAddress += ((uint32_t)CommandBlock.LUN * LUN_MEDIA_BLOCKS); #endif - + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ if (IsDataRead == DATA_READ) DataflashManager_ReadBlocks(BlockAddress, TotalBlocks); @@ -305,6 +305,7 @@ static bool SCSI_Command_ReadWrite_10(const bool IsDataRead) /* Update the bytes transferred counter and succeed the command */ CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - + return true; } + diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h index 0fc99b618..0c4869df4 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for SCSI.c. */ - + #ifndef _SCSI_H_ #define _SCSI_H_ @@ -48,7 +48,7 @@ #include "Descriptors.h" #include "DataflashManager.h" #include "SCSI_Codes.h" - + /* Macros: */ /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about @@ -70,7 +70,7 @@ /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ #define DEVICE_TYPE_BLOCK 0x00 - + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ #define DEVICE_TYPE_CDROM 0x05 @@ -82,12 +82,12 @@ { unsigned char DeviceType : 5; unsigned char PeripheralQualifier : 3; - + unsigned char Reserved : 7; unsigned char Removable : 1; - + uint8_t Version; - + unsigned char ResponseDataFormat : 4; unsigned char Reserved2 : 1; unsigned char NormACA : 1; @@ -105,27 +105,27 @@ unsigned char WideBus16Bit : 1; unsigned char WideBus32Bit : 1; unsigned char RelAddr : 1; - + uint8_t VendorID[8]; uint8_t ProductID[16]; uint8_t RevisionID[4]; } SCSI_Inquiry_Response_t; - + /** Type define for a SCSI sense structure to a SCSI REQUEST SENSE command. For details of the * structure contents, refer to the SCSI specifications. */ typedef struct { uint8_t ResponseCode; - + uint8_t SegmentNumber; - + unsigned char SenseKey : 4; unsigned char Reserved : 1; unsigned char ILI : 1; unsigned char EOM : 1; unsigned char FileMark : 1; - + uint8_t Information[4]; uint8_t AdditionalLength; uint8_t CmdSpecificInformation[4]; @@ -134,10 +134,10 @@ uint8_t FieldReplaceableUnitCode; uint8_t SenseKeySpecific[3]; } SCSI_Request_Sense_Response_t; - + /* Function Prototypes: */ bool SCSI_DecodeSCSICommand(void); - + #if defined(INCLUDE_FROM_SCSI_C) static bool SCSI_Command_Inquiry(void); static bool SCSI_Command_Request_Sense(void); @@ -145,5 +145,6 @@ static bool SCSI_Command_Send_Diagnostic(void); static bool SCSI_Command_ReadWrite_10(const bool IsDataRead); #endif - + #endif + diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI_Codes.h b/Demos/Device/LowLevel/MassStorage/Lib/SCSI_Codes.h index a69aa56fe..6bcd5780f 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI_Codes.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI_Codes.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * the SCSI standard documentation for more information on each SCSI command and * the SENSE data. */ - + #ifndef _SCSI_CODES_H_ #define _SCSI_CODES_H_ @@ -84,3 +84,4 @@ #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07 #endif + diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.c b/Demos/Device/LowLevel/MassStorage/MassStorage.c index 3bf2af16c..a168061f5 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.c +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -53,7 +53,7 @@ volatile bool IsMassStoreReset = false; int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -89,7 +89,7 @@ void EVENT_USB_Device_Connect(void) { /* Indicate USB enumerating */ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + /* Reset the MSReset flag upon connection */ IsMassStoreReset = false; } @@ -117,7 +117,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) MASS_STORAGE_IO_EPSIZE, ENDPOINT_BANK_SINGLE); /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific @@ -147,11 +147,11 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Indicate to the host the number of supported LUNs (virtual disks) on the device */ Endpoint_Write_Byte(TOTAL_LUNS - 1); - - Endpoint_ClearIN(); + + Endpoint_ClearIN(); Endpoint_ClearStatusStage(); } - + break; } } @@ -176,14 +176,14 @@ void MassStorage_Task(void) Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); /* Decode the received SCSI command, set returned status code */ - CommandStatus.Status = SCSI_DecodeSCSICommand() ? Command_Pass : Command_Fail; + CommandStatus.Status = SCSI_DecodeSCSICommand() ? Command_Pass : Command_Fail; /* Load in the CBW tag into the CSW to link them together */ CommandStatus.Tag = CommandBlock.Tag; /* Load in the data residue counter into the CSW */ CommandStatus.DataTransferResidue = CommandBlock.DataTransferLength; - + /* Stall the selected data pipe if command failed (if data is still to be transferred) */ if ((CommandStatus.Status == Command_Fail) && (CommandStatus.DataTransferResidue)) Endpoint_StallTransaction(); @@ -201,7 +201,7 @@ void MassStorage_Task(void) /* Reset the data endpoint banks */ Endpoint_ResetFIFO(MASS_STORAGE_OUT_EPNUM); Endpoint_ResetFIFO(MASS_STORAGE_IN_EPNUM); - + Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); Endpoint_ClearStall(); Endpoint_ResetDataToggle(); @@ -223,7 +223,7 @@ static bool ReadInCommandBlock(void) { /* Select the Data Out endpoint */ Endpoint_SelectEndpoint(MASS_STORAGE_OUT_EPNUM); - + /* Abort if no command has been sent from the host */ if (!(Endpoint_IsOUTReceived())) return false; @@ -247,7 +247,7 @@ static bool ReadInCommandBlock(void) Endpoint_StallTransaction(); Endpoint_SelectEndpoint(MASS_STORAGE_IN_EPNUM); Endpoint_StallTransaction(); - + return false; } @@ -255,14 +255,14 @@ static bool ReadInCommandBlock(void) Endpoint_Read_Stream_LE(&CommandBlock.SCSICommandData, CommandBlock.SCSICommandLength, StreamCallback_AbortOnMassStoreReset); - + /* Check if the current command is being aborted by the host */ if (IsMassStoreReset) return false; /* Finalize the stream transfer to send the last packet */ Endpoint_ClearOUT(); - + return true; } @@ -292,11 +292,11 @@ static void ReturnCommandStatus(void) if (IsMassStoreReset) return; } - + /* Write the CSW to the endpoint */ Endpoint_Write_Stream_LE(&CommandStatus, sizeof(CommandStatus), StreamCallback_AbortOnMassStoreReset); - + /* Check if the current command is being aborted by the host */ if (IsMassStoreReset) return; @@ -309,11 +309,12 @@ static void ReturnCommandStatus(void) * if a Mass Storage Reset request has been issued to the control endpoint. */ uint8_t StreamCallback_AbortOnMassStoreReset(void) -{ +{ /* Abort if a Mass Storage reset command was received */ if (IsMassStoreReset) return STREAMCALLBACK_Abort; - + /* Continue with the current stream operation */ return STREAMCALLBACK_Continue; } + diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.h b/Demos/Device/LowLevel/MassStorage/MassStorage.h index 5a5c5f800..d993a9a5d 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.h +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,14 +60,14 @@ #define REQ_GetMaxLUN 0xFE /** Maximum length of a SCSI command which can be issued by the device or host in a Mass Storage bulk wrapper. */ - #define MAX_SCSI_COMMAND_LENGTH 16 - + #define MAX_SCSI_COMMAND_LENGTH 16 + /** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */ #define CBW_SIGNATURE 0x43425355UL /** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */ #define CSW_SIGNATURE 0x53425355UL - + /** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */ #define COMMAND_DIRECTION_DATA_OUT (0 << 7) @@ -88,7 +88,7 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Type Defines: */ /** Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */ typedef struct @@ -101,7 +101,7 @@ uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array */ uint8_t SCSICommandData[MAX_SCSI_COMMAND_LENGTH]; /**< Issued SCSI command in the Command Block */ } CommandBlockWrapper_t; - + /** Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol. */ typedef struct { @@ -110,7 +110,7 @@ uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command */ uint8_t Status; /**< Status code of the issued command - a value from the MassStorage_CommandStatusCodes_t enum */ } CommandStatusWrapper_t; - + /* Enums: */ /** Enum for the possible command status wrapper return status codes. */ enum MassStorage_CommandStatusCodes_t @@ -119,16 +119,16 @@ Command_Fail = 1, /**< Command failed to complete - host may check the exact error via a SCSI REQUEST SENSE command */ Phase_Error = 2 /**< Command failed due to being invalid in the current phase */ }; - + /* Global Variables: */ extern CommandBlockWrapper_t CommandBlock; extern CommandStatusWrapper_t CommandStatus; extern volatile bool IsMassStoreReset; - + /* Function Prototypes: */ void SetupHardware(void); void MassStorage_Task(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); @@ -142,3 +142,4 @@ uint8_t StreamCallback_AbortOnMassStoreReset(void); #endif + diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.txt b/Demos/Device/LowLevel/MassStorage/MassStorage.txt index fe4089cb4..d72ad7656 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.txt +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mass Storage Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Mass Storage Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bulk-Only Transport</td> * </tr> @@ -45,23 +45,23 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Dual LUN Mass Storage demonstration application. This gives a simple * reference application for implementing a multiple LUN USB Mass Storage * device using the basic USB UFI drivers in all modern OSes (i.e. no * special drivers required). - * + * * On start-up the system will automatically enumerate and function as an * external mass storage device with two LUNs (separate disks) which may * be formatted and used in the same manner as commercial USB Mass Storage * devices. - * + * * You will need to format the mass storage drives upon first run of this * demonstration - as the device acts only as a data block transport between * the host and the storage media, it does not matter what file system is used, * as the data interpretation is performed by the host and not the USB device. - * + * * This demo is not restricted to only two LUNs; by changing the TOTAL_LUNS * value in MassStorageDualLUN.h, any number of LUNs can be used (from 1 to * 255), with each LUN being allocated an equal portion of the available @@ -90,3 +90,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile index 457e8b30b..d1c0d8198 100644 --- a/Demos/Device/LowLevel/MassStorage/makefile +++ b/Demos/Device/LowLevel/MassStorage/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -137,7 +137,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -150,7 +150,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -264,7 +264,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -277,7 +277,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -289,7 +289,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -301,7 +301,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -324,7 +324,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -358,7 +358,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -392,7 +392,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -421,7 +421,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -440,10 +440,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -508,11 +508,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -539,9 +539,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -639,14 +639,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -668,7 +668,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -712,3 +712,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.c b/Demos/Device/LowLevel/Mouse/Descriptors.c index 1d3708f60..d6caf51cd 100644 --- a/Demos/Device/LowLevel/Mouse/Descriptors.c +++ b/Demos/Device/LowLevel/Mouse/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2041, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,41 +107,41 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = 0x02, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_MouseHID = + .HID_MouseHID = { .Header = {.Size = sizeof(USB_Descriptor_HID_t), .Type = DTYPE_HID}, - + .HIDSpec = VERSION_BCD(01.11), .CountryCode = 0x00, .TotalReportDescriptors = 1, @@ -149,15 +149,15 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(MouseReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MOUSE_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = MOUSE_EPSIZE, .PollingIntervalMS = 0x0A - } + } }; /** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse Demo" }; @@ -235,19 +235,19 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case DTYPE_HID: + case DTYPE_HID: Address = &ConfigurationDescriptor.HID_MouseHID; Size = sizeof(USB_Descriptor_HID_t); break; - case DTYPE_Report: + case DTYPE_Report: Address = &MouseReport; Size = sizeof(MouseReport); break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } diff --git a/Demos/Device/LowLevel/Mouse/Descriptors.h b/Demos/Device/LowLevel/Mouse/Descriptors.h index a4dc5d5d6..2d9a329d0 100644 --- a/Demos/Device/LowLevel/Mouse/Descriptors.h +++ b/Demos/Device/LowLevel/Mouse/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -48,10 +48,10 @@ typedef struct { USB_Descriptor_Header_t Header; - + uint16_t HIDSpec; uint8_t CountryCode; - + uint8_t TotalReportDescriptors; uint8_t HIDReportType; @@ -72,17 +72,17 @@ USB_Descriptor_HID_t HID_MouseHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPNUM 1 - + /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 /** Descriptor header type value, to indicate a HID class HID descriptor. */ #define DTYPE_HID 0x21 - + /** Descriptor header type value, to indicate a HID class HID report descriptor. */ #define DTYPE_Report 0x22 @@ -93,3 +93,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/Mouse/Mouse.c b/Demos/Device/LowLevel/Mouse/Mouse.c index 6aa258a00..23df2a610 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.c +++ b/Demos/Device/LowLevel/Mouse/Mouse.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the Mouse demo. This file contains the main tasks of the demo and * is responsible for the initial application hardware configuration. */ - + #include "Mouse.h" /** Indicates what report mode the host has requested, true for normal HID reporting mode, false for special boot @@ -47,7 +47,7 @@ bool UsingReportProtocol = true; uint16_t IdleCount = HID_IDLE_CHANGESONLY; /** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle - * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request + * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request * the current idle period via a Get Idle HID class request, thus its value must be preserved. */ uint16_t IdleMSRemaining = 0; @@ -59,7 +59,7 @@ uint16_t IdleMSRemaining = 0; int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -110,7 +110,7 @@ void EVENT_USB_Device_Disconnect(void) /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration * of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started. - */ + */ void EVENT_USB_Device_ConfigurationChanged(void) { bool ConfigSuccess = true; @@ -123,7 +123,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) USB_Device_EnableSOFEvents(); /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific @@ -152,20 +152,20 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Clear the report data afterwards */ memset(&MouseReportData, 0, sizeof(MouseReportData)); } - + break; case REQ_GetProtocol: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); - + /* Write the current protocol flag to the host */ Endpoint_Write_Byte(UsingReportProtocol); - + Endpoint_ClearIN(); Endpoint_ClearStatusStage(); } - + break; case REQ_SetProtocol: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -176,7 +176,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Set or clear the flag depending on what the host indicates that the current Protocol should be */ UsingReportProtocol = (USB_ControlRequest.wValue != 0); } - + break; case REQ_SetIdle: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -187,13 +187,13 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Get idle period in MSB, must multiply by 4 to get the duration in milliseconds */ IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6); } - + break; case REQ_GetIdle: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { + { Endpoint_ClearSETUP(); - + /* Write the current idle duration to the host, must be divided by 4 before sent to host */ Endpoint_Write_Byte(IdleCount >> 2); @@ -221,7 +221,7 @@ void CreateMouseReport(USB_MouseReport_Data_t* const ReportData) { uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); - + /* Clear the report contents */ memset(ReportData, 0, sizeof(USB_MouseReport_Data_t)); @@ -237,7 +237,7 @@ void CreateMouseReport(USB_MouseReport_Data_t* const ReportData) if (JoyStatus_LCL & JOY_PRESS) ReportData->Button = (1 << 0); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) ReportData->Button |= (1 << 1); } @@ -248,40 +248,40 @@ void SendNextReport(void) static USB_MouseReport_Data_t PrevMouseReportData; USB_MouseReport_Data_t MouseReportData; bool SendReport; - + /* Create the next mouse report for transmission to the host */ CreateMouseReport(&MouseReportData); - + /* Check to see if the report data has changed - if so a report MUST be sent */ SendReport = (memcmp(&PrevMouseReportData, &MouseReportData, sizeof(USB_MouseReport_Data_t)) != 0); - + /* Override the check if the Y or X values are non-zero - we want continuous movement while the joystick * is being held down (via continuous reports), otherwise the cursor will only move once per joystick toggle */ if ((MouseReportData.Y != 0) || (MouseReportData.X != 0)) SendReport = true; - + /* Check if the idle period is set and has elapsed */ if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining))) { /* Reset the idle time remaining counter */ IdleMSRemaining = IdleCount; - + /* Idle period is set and has elapsed, must send a report to the host */ SendReport = true; } - + /* Select the Mouse Report Endpoint */ Endpoint_SelectEndpoint(MOUSE_EPNUM); /* Check if Mouse Endpoint Ready for Read/Write and if we should send a new report */ if (Endpoint_IsReadWriteAllowed() && SendReport) - { + { /* Save the current report data for later comparison to check for changes */ PrevMouseReportData = MouseReportData; /* Write Mouse Report Data */ Endpoint_Write_Stream_LE(&MouseReportData, sizeof(MouseReportData)); - + /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); } @@ -293,7 +293,8 @@ void Mouse_Task(void) /* Device must be connected and configured for the task to run */ if (USB_DeviceState != DEVICE_STATE_Configured) return; - + /* Send the next mouse report to the host */ SendNextReport(); } + diff --git a/Demos/Device/LowLevel/Mouse/Mouse.h b/Demos/Device/LowLevel/Mouse/Mouse.h index 56766a6df..f551f5d6e 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.h +++ b/Demos/Device/LowLevel/Mouse/Mouse.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -43,7 +43,7 @@ #include <avr/interrupt.h> #include <stdbool.h> #include <string.h> - + #include "Descriptors.h" #include <LUFA/Version.h> @@ -55,7 +55,7 @@ /* Macros: */ /** Idle period indicating that reports should be sent only when the inputs have changed */ #define HID_IDLE_CHANGESONLY 0 - + /** HID Class specific request to get the next HID report from the device. */ #define REQ_GetReport 0x01 @@ -85,7 +85,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Type Defines: */ /** Type define for the mouse HID report structure, for creating and sending HID reports to the host PC. * This mirrors the layout described to the host in the HID report descriptor, in Descriptors.c. @@ -96,7 +96,7 @@ int8_t X; /**< Current mouse delta X movement, as a signed 8-bit integer */ int8_t Y; /**< Current mouse delta Y movement, as a signed 8-bit integer */ } USB_MouseReport_Data_t; - + /* Function Prototypes: */ void SetupHardware(void); void Mouse_Task(void); @@ -110,3 +110,4 @@ void CreateMouseReport(USB_MouseReport_Data_t* const ReportData); #endif + diff --git a/Demos/Device/LowLevel/Mouse/Mouse.txt b/Demos/Device/LowLevel/Mouse/Mouse.txt index 5fcdb4d04..f26df7468 100644 --- a/Demos/Device/LowLevel/Mouse/Mouse.txt +++ b/Demos/Device/LowLevel/Mouse/Mouse.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Device Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -44,14 +44,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse demonstration application. This gives a simple reference * application for implementing a USB Mouse using the basic USB HID * drivers in all modern OSes (i.e. no special drivers required). It is * boot protocol compatible, and thus works under compatible BIOS as if * it was a native mouse (e.g. PS/2). - * + * * On start-up the system will automatically enumerate and function * as a mouse when the USB connection to a host is present. To use * the mouse, move the joystick to move the pointer, and push the @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile index 7e8d65ab5..4c5b510ea 100644 --- a/Demos/Device/LowLevel/Mouse/makefile +++ b/Demos/Device/LowLevel/Mouse/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c index 362406887..97da47e69 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -45,22 +45,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x02, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x204C, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -71,102 +71,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0xFF, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = 0x00, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = 0x02, - + .Capabilities = 0x00, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = 0x06, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0x02 }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .RNDIS_DataOutEndpoint = + .RNDIS_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .RNDIS_DataInEndpoint = + + .RNDIS_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -181,7 +181,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -192,7 +192,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -203,7 +203,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(19), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA RNDIS CDC Demo" }; @@ -229,7 +229,7 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; @@ -249,10 +249,11 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h index 5985d3473..34d64e007 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -43,10 +43,10 @@ /* Macros: */ /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 1 + #define CDC_TX_EPNUM 1 /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 2 + #define CDC_RX_EPNUM 2 /** Endpoint number of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPNUM 3 @@ -80,7 +80,7 @@ uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */ uint8_t Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. */ } USB_Descriptor_CDC_FunctionalACM_t; - + /** Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific * CDC control and data interfaces are related. See the CDC class specification for more details. */ @@ -116,3 +116,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c index 853d50542..ca66256e7 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * conversion of physical MAC addresses to protocol IP addresses between the host and the * device. */ - + #include "ARP.h" /** Processes an ARP packet inside an Ethernet frame, and writes the appropriate response @@ -59,7 +59,7 @@ int16_t ARP_ProcessARPPacket(void* InDataStart, (SwapEndian_16(ARPHeaderIN->Operation) == ARP_OPERATION_REQUEST)) { /* If the ARP packet is requesting the MAC or IP of the virtual webserver, return the response */ - if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || + if (IP_COMPARE(&ARPHeaderIN->TPA, &ServerIPAddress) || MAC_COMPARE(&ARPHeaderIN->THA, &ServerMACAddress)) { /* Fill out the ARP response header */ @@ -81,6 +81,7 @@ int16_t ARP_ProcessARPPacket(void* InDataStart, return sizeof(ARP_Header_t); } } - + return NO_RESPONSE; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h index 8de76f3b6..d97761539 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ARP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,18 +32,18 @@ * * Header file for ARP.c. */ - + #ifndef _ARP_H_ #define _ARP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** ARP header operation constant, indicating a request from a host for an address translation. */ #define ARP_OPERATION_REQUEST 1 @@ -57,19 +57,20 @@ { uint16_t HardwareType; /**< Hardware type constant, indicating the hardware used */ uint16_t ProtocolType; /**< Protocol being resolved, usually ETHERTYPE_IPV4 */ - + uint8_t HLEN; /**< Length in bytes of the source/destination hardware addresses */ uint8_t PLEN; /**< Length in bytes of the source/destination protocol addresses */ uint16_t Operation; /**< Type of operation, either ARP_OPERATION_REQUEST or ARP_OPERATION_REPLY */ - + MAC_Address_t SHA; /**< Sender's hardware address */ IP_Address_t SPA; /**< Sender's protocol address */ MAC_Address_t THA; /**< Target's hardware address */ IP_Address_t TPA; /**< Target's protocol address */ } ARP_Header_t; - + /* Function Prototypes: */ int16_t ARP_ProcessARPPacket(void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c index 41265aa27..118f5e0b5 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * handles the automatic IP negotiation to the host, so that the host will use the provided * IP address given to it by the device. */ - + #include "DHCP.h" /** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response @@ -53,7 +53,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, IP_Header_t* IPHeaderIN = (IP_Header_t*)IPHeaderInStart; DHCP_Header_t* DHCPHeaderIN = (DHCP_Header_t*)DHCPHeaderInStart; DHCP_Header_t* DHCPHeaderOUT = (DHCP_Header_t*)DHCPHeaderOutStart; - + uint8_t* DHCPOptionsINStart = (uint8_t*)(DHCPHeaderInStart + sizeof(DHCP_Header_t)); uint8_t* DHCPOptionsOUTStart = (uint8_t*)(DHCPHeaderOutStart + sizeof(DHCP_Header_t)); @@ -73,7 +73,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, DHCPHeaderOUT->YourIP = ClientIPAddress; memmove(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t)); DHCPHeaderOUT->Cookie = SwapEndian_32(DHCP_MAGIC_COOKIE); - + /* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */ IPHeaderIN->SourceAddress = ClientIPAddress; @@ -81,7 +81,7 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, /* Process the incoming DHCP packet options */ while (DHCPOptionsINStart[0] != DHCP_OPTION_END) - { + { /* Find the Message Type DHCP option, to determine the type of DHCP packet */ if (DHCPOptionsINStart[0] == DHCP_OPTION_MESSAGETYPE) { @@ -107,14 +107,15 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, DHCPOptionsOUTStart += sizeof(IP_Address_t); *(DHCPOptionsOUTStart++) = DHCP_OPTION_END; - + return (sizeof(DHCP_Header_t) + 12 + sizeof(IP_Address_t)); } } - + /* Go to the next DHCP option - skip one byte if option is a padding byte, else skip the complete option's size */ DHCPOptionsINStart += ((DHCPOptionsINStart[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptionsINStart[1] + 2)); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h index 3bfdb29be..a4dc00dbb 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/DHCP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,14 +32,14 @@ * * Header file for DHCP.c. */ - + #ifndef _DHCP_H_ #define _DHCP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" @@ -50,13 +50,13 @@ /** DHCP operation constant, indicating a reply from a DHCP server to a host. */ #define DHCP_OP_BOOTREPLY 0x02 - + /** Hardware type constant, indicating Ethernet as a carrier. */ #define DHCP_HTYPE_ETHERNET 0x01 - + /** Magic boot protocol "cookie", inserted into all BOOTP packets (BOOTP is the carrier of DHCP). */ #define DHCP_MAGIC_COOKIE 0x63825363 - + /** DHCP option list entry header, indicating that a subnet mask will follow. */ #define DHCP_OPTION_SUBNETMASK 1 @@ -71,7 +71,7 @@ /** DHCP option list entry header, indicating the end of option data. */ #define DHCP_OPTION_END 255 - + /** Message type constant, used in the DHCP option data field, requesting that a DHCP server offer an IP address. */ #define DHCP_MESSAGETYPE_DISCOVER 1 @@ -106,16 +106,16 @@ uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */ uint16_t Flags; /**< BOOTP packet flags */ - + IP_Address_t ClientIP; /**< Client IP address, if already leased an IP */ IP_Address_t YourIP; /**< Client IP address */ IP_Address_t NextServerIP; /**< Legacy BOOTP protocol field, unused for DHCP */ IP_Address_t RelayAgentIP; /**< Legacy BOOTP protocol field, unused for DHCP */ - + uint8_t ClientHardwareAddress[16]; /**< Hardware (MAC) address of the client making a request to the DHCP server */ uint8_t ServerHostnameString[64]; /**< Legacy BOOTP protocol field, unused for DHCP */ uint8_t BootFileName[128]; /**< Legacy BOOTP protocol field, unused for DHCP */ - + uint32_t Cookie; /**< Magic BOOTP protocol cookie to indicate a valid packet */ } DHCP_Header_t; @@ -125,3 +125,4 @@ void* DHCPHeaderOutStart); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c index 0b9563347..0b74d9cbc 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * frames sent and received, deferring the processing of sub-packet protocols to the appropriate * protocol handlers, such as DHCP or ARP. */ - + #include "Ethernet.h" /** Ethernet Frame buffer structure, to hold the incoming Ethernet frame from the host. */ @@ -69,9 +69,9 @@ void Ethernet_ProcessPacket(void) /* Cast the incoming Ethernet frame to the Ethernet header type */ Ethernet_Frame_Header_t* FrameINHeader = (Ethernet_Frame_Header_t*)&FrameIN.FrameData; Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData; - + int16_t RetSize = NO_RESPONSE; - + /* Ensure frame is addressed to either all (broadcast) or the virtual webserver, and is a type II frame */ if ((MAC_COMPARE(&FrameINHeader->Destination, &ServerMACAddress) || MAC_COMPARE(&FrameINHeader->Destination, &BroadcastMACAddress)) && @@ -83,13 +83,13 @@ void Ethernet_ProcessPacket(void) case ETHERTYPE_ARP: RetSize = ARP_ProcessARPPacket(&FrameIN.FrameData[sizeof(Ethernet_Frame_Header_t)], &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)]); - break; + break; case ETHERTYPE_IPV4: RetSize = IP_ProcessIPPacket(&FrameIN.FrameData[sizeof(Ethernet_Frame_Header_t)], &FrameOUT.FrameData[sizeof(Ethernet_Frame_Header_t)]); break; } - + /* Protocol processing routine has filled a response, complete the ethernet frame header */ if (RetSize > 0) { @@ -97,7 +97,7 @@ void Ethernet_ProcessPacket(void) FrameOUTHeader->Source = ServerMACAddress; FrameOUTHeader->Destination = FrameINHeader->Source; FrameOUTHeader->EtherType = FrameINHeader->EtherType; - + /* Set the response length in the buffer and indicate that a response is ready to be sent */ FrameOUT.FrameLength = (sizeof(Ethernet_Frame_Header_t) + RetSize); FrameOUT.FrameInBuffer = true; @@ -128,9 +128,10 @@ uint16_t Ethernet_Checksum16(void* Data, for (uint16_t CurrWord = 0; CurrWord < (Bytes >> 1); CurrWord++) Checksum += Words[CurrWord]; - + while (Checksum & 0xFFFF0000) Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); - + return ~Checksum; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h index 49c6b1c25..68fffb48f 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Ethernet.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Ethernet.c. */ - + #ifndef _ETHERNET_H_ #define _ETHERNET_H_ @@ -48,19 +48,19 @@ #include "DHCP.h" #include "ARP.h" #include "IP.h" - + /* Macros: */ /** Physical MAC address of the USB RNDIS network adapter. */ #define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00} - + /** Physical MAC address of the virtual server on the network. */ - #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} + #define SERVER_MAC_ADDRESS {0x00, 0x01, 0x00, 0x01, 0x00, 0x01} /** Physical MAC address of the network broadcast address. */ #define BROADCAST_MAC_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} - + /** Performs a comparison between two MAC addresses, indicating if they are identical. - * + * * \param[in] MAC1 First MAC address * \param[in] MAC2 Second MAC address * @@ -70,12 +70,12 @@ /** Maximum size of an incoming or outgoing Ethernet frame in bytes. */ #define ETHERNET_FRAME_SIZE_MAX 1500 - + /** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard. */ #define ETHERNET_VER2_MINSIZE 0x0600 - + /** Return value for all sub protocol handling routines, indicating that no response packet has been generated. */ - #define NO_RESPONSE 0 + #define NO_RESPONSE 0 /** Return value for all sub protocol handling routines, indicating that the packet has not yet been handled. */ #define NO_PROCESS -1 @@ -96,7 +96,7 @@ MAC_Address_t Source; /**< Physics MAC address of the packet source */ uint16_t EtherType; /**< Ethernet packet sub-protocol type, for Ethernet V2 packets */ } Ethernet_Frame_Header_t; - + /* External Variables: */ extern Ethernet_Frame_Info_t FrameIN; extern Ethernet_Frame_Info_t FrameOUT; @@ -106,10 +106,11 @@ extern const MAC_Address_t BroadcastMACAddress; extern const IP_Address_t BroadcastIPAddress; extern const IP_Address_t ClientIPAddress; - + /* Function Prototypes: */ void Ethernet_ProcessPacket(void); uint16_t Ethernet_Checksum16(void* Data, uint16_t Bytes); - + #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h index 014a441cf..8f529d6b4 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/EthernetProtocols.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -63,7 +63,7 @@ #define ETHERTYPE_FIBRECHANNEL 0x8906 #define ETHERTYPE_QINQ 0x9100 #define ETHERTYPE_VLLT 0xCAFE - + #define PROTOCOL_ICMP 1 #define PROTOCOL_IGMP 2 #define PROTOCOL_TCP 6 @@ -77,7 +77,7 @@ { uint8_t Octets[6]; /**< Individual bytes of a MAC address */ } MAC_Address_t; - + /** Type define for a protocol IP address of a device on a network. */ typedef struct { @@ -85,3 +85,4 @@ } IP_Address_t; #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c index 7e4be9c3d..3bf01cd4b 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * Echo requests from the host, to indicate a successful network connection between the host * and the virtual server. */ - + #include "ICMP.h" /** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response @@ -62,9 +62,9 @@ int16_t ICMP_ProcessICMPPacket(void* InDataStart, ICMPHeaderOUT->Checksum = 0; ICMPHeaderOUT->Id = ICMPHeaderIN->Id; ICMPHeaderOUT->Sequence = ICMPHeaderIN->Sequence; - + intptr_t DataSize = FrameIN.FrameLength - ((((intptr_t)InDataStart + sizeof(ICMP_Header_t)) - (intptr_t)FrameIN.FrameData)); - + /* Copy the remaining payload to the response - echo requests should echo back any sent data */ memmove(&((uint8_t*)OutDataStart)[sizeof(ICMP_Header_t)], &((uint8_t*)InDataStart)[sizeof(ICMP_Header_t)], @@ -75,6 +75,7 @@ int16_t ICMP_ProcessICMPPacket(void* InDataStart, /* Return the size of the response so far */ return (DataSize + sizeof(ICMP_Header_t)); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h index dcea1ada4..a0fb6eeee 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ICMP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,18 +39,18 @@ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** ICMP message type constant, indicating an ICMP ECHO Reply message. */ #define ICMP_TYPE_ECHOREPLY 0 /** ICMP message type constant, indicating a packet destination is unreachable. */ #define ICMP_TYPE_DESTINATIONUNREACHABLE 3 - + /** ICMP message type constant, indicating an ICMP Source Quench message. */ #define ICMP_TYPE_SOURCEQUENCH 4 @@ -62,7 +62,7 @@ /** ICMP message type constant, indicating an ICMP Time Exceeded message. */ #define ICMP_TYPE_TIMEEXCEEDED 11 - + /* Type Defines: */ /** Type define for an ICMP message header. */ typedef struct @@ -73,9 +73,10 @@ uint16_t Id; /**< Id of the ICMP message */ uint16_t Sequence; /**< Sequence number of the ICMP message, to link together message responses */ } ICMP_Header_t; - + /* Function Prototypes: */ int16_t ICMP_ProcessICMPPacket(void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c index 85ccf426e..731043f8f 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Internet Protocol (IP) packet handling routines. This protocol handles IP packets from the * host which typically encapsulate other protocols such as ICMP, UDP and TCP. */ - + #include "IP.h" /** Processes an IP packet inside an Ethernet frame, and writes the appropriate response @@ -65,7 +65,7 @@ int16_t IP_ProcessIPPacket(void* InDataStart, { return NO_RESPONSE; } - + /* Pass off the IP payload to the appropriate protocol processing routine */ switch (IPHeaderIN->Protocol) { @@ -76,15 +76,15 @@ int16_t IP_ProcessIPPacket(void* InDataStart, case PROTOCOL_TCP: RetSize = TCP_ProcessTCPPacket(InDataStart, &((uint8_t*)InDataStart)[HeaderLengthBytes], - &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); break; case PROTOCOL_UDP: RetSize = UDP_ProcessUDPPacket(InDataStart, &((uint8_t*)InDataStart)[HeaderLengthBytes], - &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); + &((uint8_t*)OutDataStart)[sizeof(IP_Header_t)]); break; } - + /* Check to see if the protocol processing routine has filled out a response */ if (RetSize > 0) { @@ -101,12 +101,13 @@ int16_t IP_ProcessIPPacket(void* InDataStart, IPHeaderOUT->TTL = DEFAULT_TTL; IPHeaderOUT->SourceAddress = IPHeaderIN->DestinationAddress; IPHeaderOUT->DestinationAddress = IPHeaderIN->SourceAddress; - + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); - + /* Return the size of the response so far */ return (sizeof(IP_Header_t) + RetSize); } - + return RetSize; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h index 8f45113be..c1b2817ca 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/IP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,18 +32,18 @@ * * Header file for IP.c. */ - + #ifndef _IP_H_ #define _IP_H_ /* Includes: */ #include <avr/io.h> #include <string.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** Protocol IP address of the host (client) machine, once assigned by DHCP. */ #define CLIENT_IP_ADDRESS { 10, 0, 0, 1} @@ -58,16 +58,16 @@ * is reached. */ #define DEFAULT_TTL 128 - + /** Performs a comparison between two IP addresses, indicating if they are identical. - * + * * \param[in] IP1 First IP address * \param[in] IP2 Second IP address * * \return True if the addresses match, false otherwise */ #define IP_COMPARE(IP1, IP2) (memcmp(IP1, IP2, sizeof(IP_Address_t)) == 0) - + /* Type Defines: */ /** Type define of an IP packet header. */ typedef struct @@ -84,13 +84,14 @@ uint8_t TTL; /**< Maximum allowable number of hops to reach the packet destination */ uint8_t Protocol; /**< Encapsulated protocol type */ uint16_t HeaderChecksum; /**< Ethernet checksum of the IP header */ - + IP_Address_t SourceAddress; /**< Source protocol IP address of the packet */ IP_Address_t DestinationAddress; /**< Destination protocol IP address of the packet */ } IP_Header_t; - + /* Function Prototypes: */ int16_t IP_ProcessIPPacket(void* InDataStart, void* OutDataStart); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c index 84e03e0ae..38df7eb64 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -31,7 +31,7 @@ /* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines accepts a header to the appropriate protocol and prints out pertinent information on the packet through the serial port. - + To disable printing of a specific protocol, define the token NO_DECODE_{Protocol} in the project makefile, and pass it to the compiler using the -D switch. */ @@ -46,7 +46,7 @@ * Packet decoding routines can be disabled by defining NO_DECODE_{Protocol Name} in the project makefile * and passing it to the compiler via the -D switch. */ - + #include "ProtocolDecoders.h" /** Decodes an Ethernet frame header and prints its contents to through the USART in a human readable format. @@ -57,9 +57,9 @@ void DecodeEthernetFrameHeader(void* InDataStart) { #if !defined(NO_DECODE_ETHERNET) Ethernet_Frame_Header_t* FrameHeader = (Ethernet_Frame_Header_t*)InDataStart; - + printf_P(PSTR("\r\n")); - + printf_P(PSTR(" ETHERNET\r\n")); printf_P(PSTR(" + Frame Size: %u\r\n"), FrameIN.FrameLength); @@ -98,7 +98,7 @@ void DecodeEthernetFrameHeader(void* InDataStart) void DecodeARPHeader(void* InDataStart) { #if !defined(NO_DECODE_ARP) - ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; + ARP_Header_t* ARPHeader = (ARP_Header_t*)InDataStart; printf_P(PSTR(" \\\r\n ARP\r\n")); @@ -106,12 +106,12 @@ void DecodeARPHeader(void* InDataStart) !(MAC_COMPARE(&ARPHeader->THA, &ServerMACAddress))) { printf_P(PSTR(" + NOT ADDRESSED TO DEVICE\r\n")); - return; + return; } printf_P(PSTR(" + Protocol: %x\r\n"), SwapEndian_16(ARPHeader->ProtocolType)); printf_P(PSTR(" + Operation: %u\r\n"), SwapEndian_16(ARPHeader->Operation)); - + if (SwapEndian_16(ARPHeader->ProtocolType) == ETHERTYPE_IPV4) { printf_P(PSTR(" + SHA MAC: %02X:%02X:%02X:%02X:%02X:%02X\r\n"), ARPHeader->SHA.Octets[0], @@ -163,14 +163,14 @@ void DecodeIPHeader(void* InDataStart) printf_P(PSTR(" + Header Length: %u Bytes\r\n"), HeaderLengthBytes); printf_P(PSTR(" + Packet Version: %u\r\n"), IPHeader->Version); printf_P(PSTR(" + Total Length: %u\r\n"), SwapEndian_16(IPHeader->TotalLength)); - + printf_P(PSTR(" + Protocol: %u\r\n"), IPHeader->Protocol); printf_P(PSTR(" + TTL: %u\r\n"), IPHeader->TTL); - + printf_P(PSTR(" + IP Src: %u.%u.%u.%u\r\n"), IPHeader->SourceAddress.Octets[0], IPHeader->SourceAddress.Octets[1], IPHeader->SourceAddress.Octets[2], - IPHeader->SourceAddress.Octets[3]); + IPHeader->SourceAddress.Octets[3]); printf_P(PSTR(" + IP Dst: %u.%u.%u.%u\r\n"), IPHeader->DestinationAddress.Octets[0], IPHeader->DestinationAddress.Octets[1], @@ -215,9 +215,9 @@ void DecodeTCPHeader(void* InDataStart) printf_P(PSTR(" + Sequence Number: %lu\r\n"), SwapEndian_32(TCPHeader->SequenceNumber)); printf_P(PSTR(" + Acknowledgment Number: %lu\r\n"), SwapEndian_32(TCPHeader->AcknowledgmentNumber)); - + printf_P(PSTR(" + Flags: 0x%02X\r\n"), TCPHeader->Flags); - + if (TCP_GetPortState(TCPHeader->DestinationPort) == TCP_Port_Closed) printf_P(PSTR(" + NOT LISTENING ON DESTINATION PORT\r\n")); #endif @@ -272,8 +272,9 @@ void DecodeDHCPHeader(void* InDataStart) break; } } - + DHCPOptions += ((DHCPOptions[0] == DHCP_OPTION_PAD) ? 1 : (DHCPOptions[1] + 2)); } #endif } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h index 4723bf472..8c124b427 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/ProtocolDecoders.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -40,12 +40,12 @@ #include <avr/io.h> #include <avr/pgmspace.h> #include <stdio.h> - + #include <LUFA/Drivers/Peripheral/SerialStream.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" - + /* Function Prototypes: */ void DecodeEthernetFrameHeader(void* InDataStart); void DecodeARPHeader(void* InDataStart); @@ -56,3 +56,4 @@ void DecodeDHCPHeader(void* InDataStart); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c index 3875f8801..520557003 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * RNDIS command handler functions. This handles RNDIS commands according to * the Microsoft RNDIS specification, creating a USB Ethernet network adapter. */ - + #define INCLUDE_FROM_RNDIS_C #include "RNDIS.h" @@ -93,7 +93,7 @@ bool ResponseReady = false; uint8_t CurrRNDISState = RNDIS_Uninitialized; /** Current Ethernet packet filter mask. This is non-zero when the adapter is initialized, or zero when disabled. */ -uint32_t CurrPacketFilter = 0; +uint32_t CurrPacketFilter = 0; /** Processes the RNDIS message received by the host and stored in the RNDISMessageBuffer global buffer. If a response is @@ -110,17 +110,17 @@ void ProcessRNDISControlMessage(void) /* Initialize the adapter - return information about the supported RNDIS version and buffer sizes */ ResponseReady = true; - + RNDIS_Initialize_Message_t* INITIALIZE_Message = (RNDIS_Initialize_Message_t*)&RNDISMessageBuffer; RNDIS_Initialize_Complete_t* INITIALIZE_Response = (RNDIS_Initialize_Complete_t*)&RNDISMessageBuffer; - + INITIALIZE_Response->MessageType = REMOTE_NDIS_INITIALIZE_CMPLT; INITIALIZE_Response->MessageLength = sizeof(RNDIS_Initialize_Complete_t); INITIALIZE_Response->RequestId = INITIALIZE_Message->RequestId; INITIALIZE_Response->Status = REMOTE_NDIS_STATUS_SUCCESS; - + INITIALIZE_Response->MajorVersion = REMOTE_NDIS_VERSION_MAJOR; - INITIALIZE_Response->MinorVersion = REMOTE_NDIS_VERSION_MINOR; + INITIALIZE_Response->MinorVersion = REMOTE_NDIS_VERSION_MINOR; INITIALIZE_Response->DeviceFlags = REMOTE_NDIS_DF_CONNECTIONLESS; INITIALIZE_Response->Medium = REMOTE_NDIS_MEDIUM_802_3; INITIALIZE_Response->MaxPacketsPerTransfer = 1; @@ -128,9 +128,9 @@ void ProcessRNDISControlMessage(void) INITIALIZE_Response->PacketAlignmentFactor = 0; INITIALIZE_Response->AFListOffset = 0; INITIALIZE_Response->AFListSize = 0; - + CurrRNDISState = RNDIS_Initialized; - + break; case REMOTE_NDIS_HALT_MSG: /* Halt the adapter, reset the adapter state - note that no response should be returned when completed */ @@ -145,42 +145,42 @@ void ProcessRNDISControlMessage(void) /* Request for information about a parameter about the adapter, specified as an OID token */ ResponseReady = true; - + RNDIS_Query_Message_t* QUERY_Message = (RNDIS_Query_Message_t*)&RNDISMessageBuffer; RNDIS_Query_Complete_t* QUERY_Response = (RNDIS_Query_Complete_t*)&RNDISMessageBuffer; uint32_t Query_Oid = QUERY_Message->Oid; - + void* QueryData = &RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) + QUERY_Message->InformationBufferOffset]; - void* ResponseData = &RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)]; + void* ResponseData = &RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)]; uint16_t ResponseSize; QUERY_Response->MessageType = REMOTE_NDIS_QUERY_CMPLT; QUERY_Response->MessageLength = sizeof(RNDIS_Query_Complete_t); - + if (ProcessNDISQuery(Query_Oid, QueryData, QUERY_Message->InformationBufferLength, ResponseData, &ResponseSize)) { QUERY_Response->Status = REMOTE_NDIS_STATUS_SUCCESS; QUERY_Response->MessageLength += ResponseSize; - + QUERY_Response->InformationBufferLength = ResponseSize; QUERY_Response->InformationBufferOffset = (sizeof(RNDIS_Query_Complete_t) - sizeof(RNDIS_Message_Header_t)); } else - { + { QUERY_Response->Status = REMOTE_NDIS_STATUS_NOT_SUPPORTED; QUERY_Response->InformationBufferLength = 0; QUERY_Response->InformationBufferOffset = 0; } - + break; case REMOTE_NDIS_SET_MSG: /* Request to set a parameter of the adapter, specified as an OID token */ - + ResponseReady = true; - + RNDIS_Set_Message_t* SET_Message = (RNDIS_Set_Message_t*)&RNDISMessageBuffer; RNDIS_Set_Complete_t* SET_Response = (RNDIS_Set_Complete_t*)&RNDISMessageBuffer; uint32_t SET_Oid = SET_Message->Oid; @@ -191,7 +191,7 @@ void ProcessRNDISControlMessage(void) void* SetData = &RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) + SET_Message->InformationBufferOffset]; - + if (ProcessNDISSet(SET_Oid, SetData, SET_Message->InformationBufferLength)) SET_Response->Status = REMOTE_NDIS_STATUS_SUCCESS; else @@ -200,9 +200,9 @@ void ProcessRNDISControlMessage(void) break; case REMOTE_NDIS_RESET_MSG: /* Soft reset the adapter */ - + ResponseReady = true; - + RNDIS_Reset_Complete_t* RESET_Response = (RNDIS_Reset_Complete_t*)&RNDISMessageBuffer; RESET_Response->MessageType = REMOTE_NDIS_RESET_CMPLT; @@ -213,9 +213,9 @@ void ProcessRNDISControlMessage(void) break; case REMOTE_NDIS_KEEPALIVE_MSG: /* Keep alive message sent to the adapter every 5 seconds when idle to ensure it is still responding */ - + ResponseReady = true; - + RNDIS_KeepAlive_Message_t* KEEPALIVE_Message = (RNDIS_KeepAlive_Message_t*)&RNDISMessageBuffer; RNDIS_KeepAlive_Complete_t* KEEPALIVE_Response = (RNDIS_KeepAlive_Complete_t*)&RNDISMessageBuffer; @@ -223,7 +223,7 @@ void ProcessRNDISControlMessage(void) KEEPALIVE_Response->MessageLength = sizeof(RNDIS_KeepAlive_Complete_t); KEEPALIVE_Response->RequestId = KEEPALIVE_Message->RequestId; KEEPALIVE_Response->Status = REMOTE_NDIS_STATUS_SUCCESS; - + break; } } @@ -248,66 +248,66 @@ static bool ProcessNDISQuery(const uint32_t OId, void* QueryData, uint16_t Query { case OID_GEN_SUPPORTED_LIST: *ResponseSize = sizeof(AdapterSupportedOIDList); - + /* Copy the list of supported NDIS OID tokens to the response buffer */ memcpy_P(ResponseData, AdapterSupportedOIDList, sizeof(AdapterSupportedOIDList)); - + return true; case OID_GEN_PHYSICAL_MEDIUM: *ResponseSize = sizeof(uint32_t); - + /* Indicate that the device is a true ethernet link */ *((uint32_t*)ResponseData) = 0; - + return true; case OID_GEN_HARDWARE_STATUS: *ResponseSize = sizeof(uint32_t); - + /* Always indicate hardware ready */ *((uint32_t*)ResponseData) = NdisHardwareStatusReady; - + return true; case OID_GEN_MEDIA_SUPPORTED: case OID_GEN_MEDIA_IN_USE: *ResponseSize = sizeof(uint32_t); - + /* Indicate 802.3 (Ethernet) supported by the adapter */ *((uint32_t*)ResponseData) = REMOTE_NDIS_MEDIUM_802_3; - + return true; case OID_GEN_VENDOR_ID: *ResponseSize = sizeof(uint32_t); - + /* Vendor ID 0x0xFFFFFF is reserved for vendors who have not purchased a NDIS VID */ *((uint32_t*)ResponseData) = 0x00FFFFFF; - + return true; case OID_GEN_MAXIMUM_FRAME_SIZE: case OID_GEN_TRANSMIT_BLOCK_SIZE: case OID_GEN_RECEIVE_BLOCK_SIZE: *ResponseSize = sizeof(uint32_t); - + /* Indicate that the maximum frame size is the size of the ethernet frame buffer */ *((uint32_t*)ResponseData) = ETHERNET_FRAME_SIZE_MAX; - + return true; case OID_GEN_VENDOR_DESCRIPTION: *ResponseSize = sizeof(AdapterVendorDescription); - + /* Copy vendor description string to the response buffer */ memcpy_P(ResponseData, AdapterVendorDescription, sizeof(AdapterVendorDescription)); - + return true; case OID_GEN_MEDIA_CONNECT_STATUS: *ResponseSize = sizeof(uint32_t); - + /* Always indicate that the adapter is connected to a network */ *((uint32_t*)ResponseData) = REMOTE_NDIS_MEDIA_STATE_CONNECTED; - + return true; case OID_GEN_LINK_SPEED: *ResponseSize = sizeof(uint32_t); - + /* Indicate 10Mb/s link speed */ *((uint32_t*)ResponseData) = 100000; @@ -315,25 +315,25 @@ static bool ProcessNDISQuery(const uint32_t OId, void* QueryData, uint16_t Query case OID_802_3_PERMANENT_ADDRESS: case OID_802_3_CURRENT_ADDRESS: *ResponseSize = sizeof(MAC_Address_t); - + /* Copy over the fixed adapter MAC to the response buffer */ memcpy_P(ResponseData, &AdapterMACAddress, sizeof(MAC_Address_t)); return true; case OID_802_3_MAXIMUM_LIST_SIZE: *ResponseSize = sizeof(uint32_t); - + /* Indicate only one multicast address supported */ *((uint32_t*)ResponseData) = 1; - + return true; case OID_GEN_CURRENT_PACKET_FILTER: *ResponseSize = sizeof(uint32_t); - + /* Indicate the current packet filter mask */ *((uint32_t*)ResponseData) = CurrPacketFilter; - - return true; + + return true; case OID_GEN_XMIT_OK: case OID_GEN_RCV_OK: case OID_GEN_XMIT_ERROR: @@ -343,24 +343,24 @@ static bool ProcessNDISQuery(const uint32_t OId, void* QueryData, uint16_t Query case OID_802_3_XMIT_ONE_COLLISION: case OID_802_3_XMIT_MORE_COLLISIONS: *ResponseSize = sizeof(uint32_t); - + /* Unused statistic OIDs - always return 0 for each */ *((uint32_t*)ResponseData) = 0; - + return true; case OID_GEN_MAXIMUM_TOTAL_SIZE: *ResponseSize = sizeof(uint32_t); - + /* Indicate maximum overall buffer (Ethernet frame and RNDIS header) the adapter can handle */ *((uint32_t*)ResponseData) = (sizeof(RNDISMessageBuffer) + ETHERNET_FRAME_SIZE_MAX); - + return true; default: return false; } } -/** Processes RNDIS set commands, setting adapter parameters to values given by the host. The requested parameter is given +/** Processes RNDIS set commands, setting adapter parameters to values given by the host. The requested parameter is given * as an OID value. * * \param[in] OId OId value of the parameter being set @@ -378,16 +378,17 @@ static bool ProcessNDISSet(uint32_t OId, void* SetData, uint16_t SetSize) case OID_GEN_CURRENT_PACKET_FILTER: /* Save the packet filter mask in case the host queries it again later */ CurrPacketFilter = *((uint32_t*)SetData); - + /* Set the RNDIS state to initialized if the packet filter is non-zero */ CurrRNDISState = ((CurrPacketFilter) ? RNDIS_Data_Initialized : RNDIS_Data_Initialized); - + return true; case OID_802_3_MULTICAST_LIST: /* Do nothing - throw away the value from the host as it is unused */ - + return true; default: return false; } } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h index 17a34ace7..ed35b3546 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDIS.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <avr/io.h> #include <stdbool.h> - + #include "RNDISEthernet.h" #include "RNDISConstants.h" #include "Ethernet.h" @@ -50,13 +50,13 @@ /** Implemented RNDIS Version Minor. */ #define REMOTE_NDIS_VERSION_MINOR 0x00 - + /** RNDIS request to issue a host-to-device NDIS command. */ #define REQ_SendEncapsulatedCommand 0x00 /** RNDIS request to issue a device-to-host NDIS response. */ #define REQ_GetEncapsulatedResponse 0x01 - + /* Enums: */ /** Enum for the possible NDIS adapter states. */ enum RNDIS_States_t @@ -99,19 +99,19 @@ uint32_t VcHandle; uint32_t Reserved; } RNDIS_Packet_Message_t; - + /** Type define for a RNDIS Initialize command message. */ typedef struct { uint32_t MessageType; uint32_t MessageLength; uint32_t RequestId; - + uint32_t MajorVersion; uint32_t MinorVersion; uint32_t MaxTransferSize; } RNDIS_Initialize_Message_t; - + /** Type define for a RNDIS Initialize complete response message. */ typedef struct { @@ -119,7 +119,7 @@ uint32_t MessageLength; uint32_t RequestId; uint32_t Status; - + uint32_t MajorVersion; uint32_t MinorVersion; uint32_t DeviceFlags; @@ -130,7 +130,7 @@ uint32_t AFListOffset; uint32_t AFListSize; } RNDIS_Initialize_Complete_t; - + /** Type define for a RNDIS Keep-alive command message. */ typedef struct { @@ -157,14 +157,14 @@ uint32_t AddressingReset; } RNDIS_Reset_Complete_t; - + /** Type define for a RNDIS Set command message. */ typedef struct { uint32_t MessageType; uint32_t MessageLength; uint32_t RequestId; - + uint32_t Oid; uint32_t InformationBufferLength; uint32_t InformationBufferOffset; @@ -179,20 +179,20 @@ uint32_t RequestId; uint32_t Status; } RNDIS_Set_Complete_t; - + /** Type define for a RNDIS Query command message. */ typedef struct { uint32_t MessageType; uint32_t MessageLength; uint32_t RequestId; - + uint32_t Oid; uint32_t InformationBufferLength; uint32_t InformationBufferOffset; uint32_t DeviceVcHandle; } RNDIS_Query_Message_t; - + /** Type define for a RNDIS Query complete response message. */ typedef struct { @@ -200,11 +200,11 @@ uint32_t MessageLength; uint32_t RequestId; uint32_t Status; - + uint32_t InformationBufferLength; uint32_t InformationBufferOffset; } RNDIS_Query_Complete_t; - + /* External Variables: */ extern uint8_t RNDISMessageBuffer[]; extern RNDIS_Message_Header_t* MessageHeader; @@ -222,7 +222,8 @@ uint16_t* ResponseSize); static bool ProcessNDISSet(const uint32_t OId, void* SetData, - uint16_t SetSize); + uint16_t SetSize); #endif - + #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDISConstants.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDISConstants.h index efe22b699..273fdb81e 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDISConstants.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/RNDISConstants.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * RNDIS specification related constants. For more information on these * constants, please refer to the Microsoft RNDIS specification. */ - + #ifndef _RNDIS_CONSTANTS_DEVICE_H_ #define _RNDIS_CONSTANTS_DEVICE_H_ @@ -52,19 +52,19 @@ #define REMOTE_NDIS_SET_CMPLT 0x80000005UL #define REMOTE_NDIS_RESET_CMPLT 0x80000006UL #define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008UL - + #define REMOTE_NDIS_STATUS_SUCCESS 0x00000000UL #define REMOTE_NDIS_STATUS_FAILURE 0xC0000001UL #define REMOTE_NDIS_STATUS_INVALID_DATA 0xC0010015UL #define REMOTE_NDIS_STATUS_NOT_SUPPORTED 0xC00000BBUL #define REMOTE_NDIS_STATUS_MEDIA_CONNECT 0x4001000BUL #define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT 0x4001000CUL - + #define REMOTE_NDIS_MEDIA_STATE_CONNECTED 0x00000000UL #define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED 0x00000001UL - + #define REMOTE_NDIS_MEDIUM_802_3 0x00000000UL - + #define REMOTE_NDIS_DF_CONNECTIONLESS 0x00000001UL #define REMOTE_NDIS_DF_CONNECTION_ORIENTED 0x00000002UL @@ -79,8 +79,8 @@ #define REMOTE_NDIS_PACKET_GROUP 0x00001000UL #define REMOTE_NDIS_PACKET_ALL_FUNCTIONAL 0x00002000UL #define REMOTE_NDIS_PACKET_FUNCTIONAL 0x00004000UL - #define REMOTE_NDIS_PACKET_MAC_FRAME 0x00008000UL - + #define REMOTE_NDIS_PACKET_MAC_FRAME 0x00008000UL + #define OID_GEN_SUPPORTED_LIST 0x00010101UL #define OID_GEN_HARDWARE_STATUS 0x00010102UL #define OID_GEN_MEDIA_SUPPORTED 0x00010103UL @@ -110,3 +110,4 @@ #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103UL #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c index a159f35d1..fe8716890 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * and reception of packets to and from devices on a network, to "ports" on the device. It is used in situations where data * delivery must be reliable and correct, e.g. HTTP, TELNET and most other non-streaming protocols. */ - + #define INCLUDE_FROM_TCP_C #include "TCP.h" @@ -64,7 +64,7 @@ void TCP_Task(void) for (uint8_t PTableEntry = 0; PTableEntry < MAX_OPEN_TCP_PORTS; PTableEntry++) { /* Run the application handler for the port */ - if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && + if ((PortStateTable[PTableEntry].Port == ConnectionStateTable[CSTableEntry].Port) && (PortStateTable[PTableEntry].State == TCP_Port_Open)) { PortStateTable[PTableEntry].ApplicationHandler(&ConnectionStateTable[CSTableEntry], @@ -72,11 +72,11 @@ void TCP_Task(void) } } } - + /* Bail out early if there is already a frame waiting to be sent in the Ethernet OUT buffer */ if (FrameOUT.FrameInBuffer) return; - + /* Send response packets from each application as the TCP packet buffers are filled by the applications */ for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) { @@ -108,7 +108,7 @@ void TCP_Task(void) TCPHeaderOUT->Reserved = 0; memcpy(TCPDataOUT, ConnectionStateTable[CSTableEntry].Info.Buffer.Data, PacketSize); - + ConnectionStateTable[CSTableEntry].Info.SequenceNumberOut += PacketSize; TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, ServerIPAddress, @@ -130,11 +130,11 @@ void TCP_Task(void) IPHeaderOUT->TTL = DEFAULT_TTL; IPHeaderOUT->SourceAddress = ServerIPAddress; IPHeaderOUT->DestinationAddress = ConnectionStateTable[CSTableEntry].RemoteAddress; - + IPHeaderOUT->HeaderChecksum = Ethernet_Checksum16(IPHeaderOUT, sizeof(IP_Header_t)); - + PacketSize += sizeof(IP_Header_t); - + /* Fill out the response Ethernet frame header */ FrameOUTHeader->Source = ServerMACAddress; FrameOUTHeader->Destination = (MAC_Address_t){{0x02, 0x00, 0x02, 0x00, 0x02, 0x00}}; @@ -145,9 +145,9 @@ void TCP_Task(void) /* Set the response length in the buffer and indicate that a response is ready to be sent */ FrameOUT.FrameLength = PacketSize; FrameOUT.FrameInBuffer = true; - + ConnectionStateTable[CSTableEntry].Info.Buffer.Ready = false; - + break; } } @@ -207,7 +207,7 @@ bool TCP_SetPortState(const uint16_t Port, return true; } } - + /* Port not in table and no room to add it, return failure */ return false; } @@ -234,7 +234,7 @@ uint8_t TCP_GetPortState(const uint16_t Port) if (PortStateTable[PTableEntry].Port == Port) return PortStateTable[PTableEntry].State; } - + /* Port not in table, assume closed */ return TCP_Port_Closed; } @@ -267,20 +267,20 @@ bool TCP_SetConnectionState(const uint16_t Port, return true; } } - + for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++) { /* Find empty entry in the table */ if (ConnectionStateTable[CSTableEntry].State == TCP_Connection_Closed) { ConnectionStateTable[CSTableEntry].Port = Port; - ConnectionStateTable[CSTableEntry].RemoteAddress = RemoteAddress; + ConnectionStateTable[CSTableEntry].RemoteAddress = RemoteAddress; ConnectionStateTable[CSTableEntry].RemotePort = RemotePort; ConnectionStateTable[CSTableEntry].State = State; return true; } } - + return false; } @@ -304,12 +304,12 @@ uint8_t TCP_GetConnectionState(const uint16_t Port, if ((ConnectionStateTable[CSTableEntry].Port == Port) && IP_COMPARE(&ConnectionStateTable[CSTableEntry].RemoteAddress, &RemoteAddress) && ConnectionStateTable[CSTableEntry].RemotePort == RemotePort) - + { return ConnectionStateTable[CSTableEntry].State; } } - + return TCP_Connection_Closed; } @@ -337,7 +337,7 @@ TCP_ConnectionInfo_t* TCP_GetConnectionInfo(const uint16_t Port, return &ConnectionStateTable[CSTableEntry].Info; } } - + return NULL; } @@ -361,11 +361,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_Header_t* TCPHeaderOUT = (TCP_Header_t*)TCPHeaderOutStart; TCP_ConnectionInfo_t* ConnectionInfo; - + DecodeTCPHeader(TCPHeaderInStart); bool PacketResponse = false; - + /* Check if the destination port is open and allows incoming connections */ if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open) { @@ -379,8 +379,8 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed)) { - TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); - PacketResponse = true; + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + PacketResponse = true; } } else @@ -395,7 +395,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, if (TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_SYNReceived)) { - TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); + TCPHeaderOUT->Flags = (TCP_FLAG_SYN | TCP_FLAG_ACK); ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); @@ -407,10 +407,10 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, { TCPHeaderOUT->Flags = TCP_FLAG_RST; } - + PacketResponse = true; } - + break; case TCP_Connection_SYNReceived: if (TCPHeaderIN->Flags == TCP_FLAG_ACK) @@ -422,19 +422,19 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); - + ConnectionInfo->SequenceNumberOut++; } - + break; case TCP_Connection_Established: if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) { /* FIN ACK when connected to a peer starts the finalization process */ - - TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); + + TCPHeaderOUT->Flags = (TCP_FLAG_FIN | TCP_FLAG_ACK); PacketResponse = true; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_CloseWait); @@ -449,14 +449,14 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort); - /* Check if the buffer is currently in use either by a buffered data to send, or receive */ + /* Check if the buffer is currently in use either by a buffered data to send, or receive */ if ((ConnectionInfo->Buffer.InUse == false) && (ConnectionInfo->Buffer.Ready == false)) - { + { ConnectionInfo->Buffer.Direction = TCP_PACKETDIR_IN; ConnectionInfo->Buffer.InUse = true; ConnectionInfo->Buffer.Length = 0; } - + /* Check if the buffer has been claimed by us to read in data from the peer */ if ((ConnectionInfo->Buffer.Direction == TCP_PACKETDIR_IN) && (ConnectionInfo->Buffer.Length != TCP_WINDOW_SIZE)) @@ -472,7 +472,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn += DataLength; ConnectionInfo->Buffer.Length += DataLength; - + /* Check if the buffer is full or if the PSH flag is set, if so indicate buffer ready */ if ((!(TCP_WINDOW_SIZE - ConnectionInfo->Buffer.Length)) || (TCPHeaderIN->Flags & TCP_FLAG_PSH)) { @@ -489,7 +489,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, return NO_PROCESS; } } - + break; case TCP_Connection_Closing: ConnectionInfo = TCP_GetConnectionInfo(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, @@ -497,9 +497,9 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->Flags = (TCP_FLAG_ACK | TCP_FLAG_FIN); PacketResponse = true; - + ConnectionInfo->Buffer.InUse = false; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_FINWait1); @@ -515,7 +515,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn++; ConnectionInfo->SequenceNumberOut++; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } @@ -524,7 +524,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_FINWait2); } - + break; case TCP_Connection_FINWait2: if (TCPHeaderIN->Flags == (TCP_FLAG_FIN | TCP_FLAG_ACK)) @@ -537,11 +537,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, ConnectionInfo->SequenceNumberIn++; ConnectionInfo->SequenceNumberOut++; - + TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } - + break; case TCP_Connection_CloseWait: if (TCPHeaderIN->Flags == TCP_FLAG_ACK) @@ -549,7 +549,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCP_SetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort, TCP_Connection_Closed); } - + break; } } @@ -557,10 +557,10 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, else { /* Port is not open, indicate via a RST/ACK response to the sender */ - TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); + TCPHeaderOUT->Flags = (TCP_FLAG_RST | TCP_FLAG_ACK); PacketResponse = true; } - + /* Check if we need to respond to the sent packet */ if (PacketResponse) { @@ -572,7 +572,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->SequenceNumber = SwapEndian_32(ConnectionInfo->SequenceNumberOut); TCPHeaderOUT->AcknowledgmentNumber = SwapEndian_32(ConnectionInfo->SequenceNumberIn); TCPHeaderOUT->DataOffset = (sizeof(TCP_Header_t) / sizeof(uint32_t)); - + if (!(ConnectionInfo->Buffer.InUse)) TCPHeaderOUT->WindowSize = SwapEndian_16(TCP_WINDOW_SIZE); else @@ -581,11 +581,11 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, TCPHeaderOUT->UrgentPointer = 0; TCPHeaderOUT->Checksum = 0; TCPHeaderOUT->Reserved = 0; - + TCPHeaderOUT->Checksum = TCP_Checksum16(TCPHeaderOUT, IPHeaderIN->DestinationAddress, - IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); + IPHeaderIN->SourceAddress, sizeof(TCP_Header_t)); - return sizeof(TCP_Header_t); + return sizeof(TCP_Header_t); } return NO_RESPONSE; @@ -607,10 +607,10 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, uint16_t TCPOutSize) { uint32_t Checksum = 0; - + /* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header, complimented */ - + Checksum += ((uint16_t*)&SourceAddress)[0]; Checksum += ((uint16_t*)&SourceAddress)[1]; Checksum += ((uint16_t*)&DestinationAddress)[0]; @@ -620,12 +620,13 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, for (uint16_t CurrWord = 0; CurrWord < (TCPOutSize >> 1); CurrWord++) Checksum += ((uint16_t*)TCPHeaderOutStart)[CurrWord]; - + if (TCPOutSize & 0x01) Checksum += (((uint16_t*)TCPHeaderOutStart)[TCPOutSize >> 1] & 0x00FF); - + while (Checksum & 0xFFFF0000) Checksum = ((Checksum & 0xFFFF) + (Checksum >> 16)); - + return ~Checksum; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h index 838e0134b..0b1160dee 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/TCP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,11 +39,11 @@ /* Includes: */ #include <avr/io.h> #include <stdbool.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" - + /* Macros: */ /** Maximum number of TCP ports which can be open at the one time. */ #define MAX_OPEN_TCP_PORTS 1 @@ -53,16 +53,16 @@ /** TCP window size, giving the maximum number of bytes which can be buffered at the one time. */ #define TCP_WINDOW_SIZE 512 - + /** Port number for HTTP transmissions. */ #define TCP_PORT_HTTP SwapEndian_16(80) - + /** Data direction indicator for a TCP application buffer, indicating data from host-to-device. */ #define TCP_PACKETDIR_IN false /** Data direction indicator for a TCP application buffer, indicating data from device-to-host. */ #define TCP_PACKETDIR_OUT true - + /** Congestion Window Reduced TCP flag mask. */ #define TCP_FLAG_CWR (1 << 7) @@ -86,7 +86,7 @@ /** Connection Finalize TCP flag mask. */ #define TCP_FLAG_FIN (1 << 0) - + /** Application macro: Determines if the given application buffer contains a packet received from the host * * \param[in] Buffer Application buffer to check @@ -139,7 +139,7 @@ * \param[in] Buffer Application buffer to clear */ #define TCP_APP_CLEAR_BUFFER(Buffer) MACROS{ Buffer->Ready = false; Buffer->Length = 0; }MACROE - + /** Application macro: Closes an open connection to a host. * * \param[in] Connection Open TCP connection to close @@ -153,7 +153,7 @@ TCP_Port_Closed = 0, /**< TCP port closed, no connections to a host may be made on this port. */ TCP_Port_Open = 1, /**< TCP port open, connections to a host may be made on this port. */ }; - + /** Enum for possible TCP connection states. */ enum TCP_ConnectionStates_t { @@ -167,9 +167,9 @@ TCP_Connection_Closing = 7, /**< Unused */ TCP_Connection_LastACK = 8, /**< Unused */ TCP_Connection_TimeWait = 9, /**< Unused */ - TCP_Connection_Closed = 10, /**< Connection closed in both directions */ + TCP_Connection_Closed = 10, /**< Connection closed in both directions */ }; - + /* Type Defines: */ /** Type define for a TCP connection buffer structure, including size, data and direction. */ typedef struct @@ -186,7 +186,7 @@ /** Type define for a TCP connection information structure. */ typedef struct { - uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ + uint32_t SequenceNumberIn; /**< Current TCP sequence number for host-to-device */ uint32_t SequenceNumberOut; /**< Current TCP sequence number for device-to-host */ TCP_ConnectionBuffer_t Buffer; /**< Connection application data buffer */ } TCP_ConnectionInfo_t; @@ -215,15 +215,15 @@ { uint16_t SourcePort; /**< Source port of the TCP packet */ uint16_t DestinationPort; /**< Destination port of the TCP packet */ - + uint32_t SequenceNumber; /**< Data sequence number of the packet */ uint32_t AcknowledgmentNumber; /**< Data acknowledgment number of the packet */ - + unsigned char Reserved : 4; /**< Reserved, must be all 0 */ unsigned char DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */ uint8_t Flags; /**< TCP packet flags */ uint16_t WindowSize; /**< Current data window size (bytes remaining in reception buffer) */ - + uint16_t Checksum; /**< TCP checksum */ uint16_t UrgentPointer; /**< Urgent data pointer */ } TCP_Header_t; @@ -257,3 +257,4 @@ #endif #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c index 15b065656..9637bebcb 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * User Datagram Protocol (UDP) packet handling routines. This protocol handles high throughput, low * reliability packets which are typically used to encapsulate streaming data. */ - + #define INCLUDE_FROM_UDP_C #include "UDP.h" @@ -52,11 +52,11 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, { UDP_Header_t* UDPHeaderIN = (UDP_Header_t*)UDPHeaderInStart; UDP_Header_t* UDPHeaderOUT = (UDP_Header_t*)UDPHeaderOutStart; - + int16_t RetSize = NO_RESPONSE; - + DecodeUDPHeader(UDPHeaderInStart); - + switch (SwapEndian_16(UDPHeaderIN->DestinationPort)) { case UDP_PORT_DHCP_REQUEST: @@ -65,7 +65,7 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, &((uint8_t*)UDPHeaderOutStart)[sizeof(UDP_Header_t)]); break; } - + /* Check to see if the protocol processing routine has filled out a response */ if (RetSize > 0) { @@ -78,6 +78,7 @@ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, /* Return the size of the response so far */ return (sizeof(UDP_Header_t) + RetSize); } - + return NO_RESPONSE; } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h index 42d7925a3..32861a420 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/UDP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,12 +38,12 @@ /* Includes: */ #include <avr/io.h> - + #include "EthernetProtocols.h" #include "Ethernet.h" #include "ProtocolDecoders.h" #include "DHCP.h" - + /* Macros: */ /** Source UDP port for a DHCP request. */ #define UDP_PORT_DHCP_REQUEST 67 @@ -63,10 +63,11 @@ uint16_t Length; /**< Total packet length, in bytes */ uint16_t Checksum; /**< Optional UDP packet checksum */ } UDP_Header_t; - + /* Function Prototypes: */ int16_t UDP_ProcessUDPPacket(void* IPHeaderInStart, void* UDPHeaderInStart, void* UDPHeaderOutStart); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c b/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c index bc42ef395..bca8673ca 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -43,7 +43,7 @@ char PROGMEM HTTP200Header[] = "HTTP/1.1 200 OK\r\n" "Server: LUFA RNDIS\r\n" "Content-type: text/html\r\n" "Connection: close\r\n\r\n"; - + /** HTTP server response header, for transmission before a resource not found error. This indicates to the host that the given * given URL is invalid, and gives extra error information. */ @@ -54,7 +54,7 @@ char PROGMEM HTTP404Header[] = "HTTP/1.1 404 Not Found\r\n" /** HTTP page to serve to the host when a HTTP request is made. This page is too long for a single response, thus it is automatically * broken up into smaller blocks and sent as a series of packets each time the webserver application callback is run. */ -char PROGMEM HTTPPage[] = +char PROGMEM HTTPPage[] = "<html>" " <head>" " <title>" @@ -108,7 +108,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { char* BufferDataStr = (char*)Buffer->Data; static uint8_t PageBlock = 0; - + /* Check to see if a packet has been received on the HTTP port from a remote host */ if (TCP_APP_HAS_RECEIVED_PACKET(Buffer)) { @@ -120,7 +120,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, /* Copy the HTTP 200 response header into the packet buffer */ strcpy_P(BufferDataStr, HTTP200Header); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); @@ -131,10 +131,10 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Copy the HTTP 404 response header into the packet buffer */ strcpy_P(BufferDataStr, HTTP404Header); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -155,9 +155,9 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, strcpy_P(BufferDataStr, HTTP404Header); /* Send the buffer contents to the host */ - TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); + TCP_APP_SEND_BUFFER(Buffer, strlen(BufferDataStr)); } - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -165,7 +165,7 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Echo the host's query back to the host */ TCP_APP_SEND_BUFFER(Buffer, Buffer->Length); - + /* All data sent, close the connection */ TCP_APP_CLOSECONNECTION(ConnectionState); } @@ -179,13 +179,13 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { uint16_t RemLength = strlen_P(&HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE]); uint16_t Length; - + /* Determine the length of the loaded block */ Length = ((RemLength > HTTP_REPLY_BLOCK_SIZE) ? HTTP_REPLY_BLOCK_SIZE : RemLength); /* Copy the next buffer sized block of the page to the packet buffer */ strncpy_P(BufferDataStr, &HTTPPage[PageBlock * HTTP_REPLY_BLOCK_SIZE], Length); - + /* Send the buffer contents to the host */ TCP_APP_SEND_BUFFER(Buffer, Length); @@ -194,9 +194,10 @@ void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, { /* Unlock the buffer so that the host can fill it with future packets */ TCP_APP_RELEASE_BUFFER(Buffer); - + /* Close the connection to the host */ TCP_APP_CLOSECONNECTION(ConnectionState); } } } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h b/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h index 87fe1c91d..7abd6adc9 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h +++ b/Demos/Device/LowLevel/RNDISEthernet/Lib/Webserver.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,25 +32,26 @@ * * Header file for Webserver.c. */ - + #ifndef _WEBSERVER_H_ #define _WEBSERVER_H_ /* Includes: */ #include <avr/io.h> #include <avr/pgmspace.h> - + #include <LUFA/Version.h> - + #include "TCP.h" - + /* Macros: */ /** Maximum size of a HTTP response per transmission */ #define HTTP_REPLY_BLOCK_SIZE 128 - + /* Function Prototypes: */ void Webserver_Init(void); void Webserver_ApplicationCallback(TCP_ConnectionState_t* const ConnectionState, TCP_ConnectionBuffer_t* const Buffer); #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c index 8a8d2142a..e8eda4ccd 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,7 +49,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { Ethernet_Task(); @@ -125,7 +125,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) { Endpoint_ClearSETUP(); - + /* Read in the RNDIS message into the message buffer */ Endpoint_Read_Control_Stream_LE(RNDISMessageBuffer, USB_ControlRequest.wLength); Endpoint_ClearIN(); @@ -133,7 +133,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Process the RNDIS message */ ProcessRNDISControlMessage(); } - + break; case REQ_GetEncapsulatedResponse: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -147,7 +147,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) } Endpoint_ClearSETUP(); - + /* Write the message response data to the endpoint */ Endpoint_Write_Control_Stream_LE(RNDISMessageBuffer, MessageHeader->MessageLength); Endpoint_ClearOUT(); @@ -155,7 +155,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) /* Reset the message header once again after transmission */ MessageHeader->MessageLength = 0; } - + break; } } @@ -180,7 +180,7 @@ void RNDIS_Task(void) .wIndex = 0, .wLength = 0, }; - + /* Indicate that a message response is ready for the host */ Endpoint_Write_Stream_LE(&Notification, sizeof(Notification)); @@ -190,7 +190,7 @@ void RNDIS_Task(void) /* Indicate a response is no longer ready */ ResponseReady = false; } - + /* Don't process the data endpoints until the system is in the data initialized state, and the buffer is free */ if ((CurrRNDISState == RNDIS_Data_Initialized) && !(MessageHeader->MessageLength)) { @@ -199,7 +199,7 @@ void RNDIS_Task(void) /* Select the data OUT endpoint */ Endpoint_SelectEndpoint(CDC_RX_EPNUM); - + /* Check if the data OUT endpoint contains data, and that the IN buffer is empty */ if (Endpoint_IsOUTReceived() && !(FrameIN.FrameInBuffer)) { @@ -212,23 +212,23 @@ void RNDIS_Task(void) Endpoint_StallTransaction(); return; } - + /* Read in the Ethernet frame into the buffer */ Endpoint_Read_Stream_LE(FrameIN.FrameData, RNDISPacketHeader.DataLength); /* Finalize the stream transfer to send the last packet */ Endpoint_ClearOUT(); - + /* Store the size of the Ethernet frame */ FrameIN.FrameLength = RNDISPacketHeader.DataLength; /* Indicate Ethernet IN buffer full */ FrameIN.FrameInBuffer = true; } - + /* Select the data IN endpoint */ Endpoint_SelectEndpoint(CDC_TX_EPNUM); - + /* Check if the data IN endpoint is ready for more data, and that the IN buffer is full */ if (Endpoint_IsINReady() && FrameOUT.FrameInBuffer) { @@ -246,10 +246,10 @@ void RNDIS_Task(void) /* Send the Ethernet frame data to the host */ Endpoint_Write_Stream_LE(FrameOUT.FrameData, RNDISPacketHeader.DataLength); - + /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); - + /* Indicate Ethernet OUT buffer no longer full */ FrameOUT.FrameInBuffer = false; } @@ -282,3 +282,4 @@ void Ethernet_Task(void) LEDs_SetAllLEDs(LEDMASK_USB_READY); } } + diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h index 0caf953d2..fb1a8d314 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for RNDISEthernet.c. */ - + #ifndef _RNDISETHERNET_H_ #define _RNDISETHERNET_H_ @@ -55,7 +55,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> - + /* Macros: */ /** Notification value to indicate that a frame is ready to be read by the host. */ #define NOTIF_RESPONSE_AVAILABLE 0x01 @@ -74,7 +74,7 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Type Defines: */ /** Type define for a RNDIS notification message, for transmission to the RNDIS host via the notification * Endpoint. @@ -87,7 +87,7 @@ uint16_t wIndex; /**< Two byte notification index parameter */ uint16_t wLength; /**< Size of data payload following the notification header */ } USB_Notification_t; - + /* Function Prototypes: */ void SetupHardware(void); void RNDIS_Task(void); @@ -97,5 +97,6 @@ void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); - + #endif + diff --git a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt index f9cd651d0..906ea0101 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt +++ b/Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet) * * \section SSec_Compat Demo Compatibility: @@ -26,7 +26,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> @@ -40,7 +40,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Remote Network Driver Interface demonstration application. * This gives a simple reference application for implementing @@ -49,7 +49,7 @@ * standard; this demo will only work on Windows 2000 (manually * patched with the Microsoft RNDIS hotfix) and above (with no * manual patches), or on the latest Linux kernels. - * + * * Before running, you will need to install the INF file that * is located in the RNDISEthernet project directory. This will * enable Windows to use its inbuilt RNDIS drivers, negating the @@ -58,7 +58,7 @@ * Windows 2000 is used, the Microsoft INF file in the hotfix * will need to be altered to use the VID/PID of the demo and * then chosen instead of the LUFA RNDIS INF file when prompted. - * + * * When enumerated, this demo will install as a new network * adapter which ethernet packets can be sent to and received * from. Running on top of the adapter is a very simple TCP/IP @@ -66,10 +66,10 @@ * accessed through a web browser at IP address 10.0.0.2:80 or * through a TELNET client at 10.0.0.2:25. This device also supports * ping echos via the ICMP protocol. - * + * * \note The TCP/IP stack in this demo has a number of limitations * and should serve as an example only - it is not fully featured nor - * compliant to the TCP/IP specification. For complete projects, it is + * compliant to the TCP/IP specification. For complete projects, it is * recommended that it be replaced with an external open source TCP/IP * stack that is feature complete, such as the uIP stack. * @@ -120,3 +120,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile index 4f8deac96..9695916c5 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/makefile +++ b/Demos/Device/LowLevel/RNDISEthernet/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -155,7 +155,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -168,7 +168,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -282,7 +282,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -295,7 +295,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -307,7 +307,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -319,7 +319,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -342,7 +342,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -376,7 +376,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -410,7 +410,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -439,7 +439,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -458,10 +458,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -526,11 +526,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -557,9 +557,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -657,14 +657,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -686,7 +686,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -729,4 +729,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) .PHONY : all begin finish end sizebefore sizeafter gccversion \ build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ -debug gdb-config
\ No newline at end of file +debug gdb-config diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c index 5ca446667..9b3aea4b8 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.c +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -57,22 +57,22 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x02, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2044, .ReleaseNumber = VERSION_BCD(00.01), - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = USE_INTERNAL_SERIAL, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -83,102 +83,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 2, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .CDC_CCI_Interface = + + .CDC_CCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 1, - + .Class = 0x02, .SubClass = 0x02, .Protocol = 0x01, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_Functional_Header = + .CDC_Functional_Header = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalHeader_t), .Type = DTYPE_CSInterface}, .Subtype = 0x00, - + .CDCSpecification = VERSION_BCD(01.10), }, - .CDC_Functional_ACM = + .CDC_Functional_ACM = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalACM_t), .Type = DTYPE_CSInterface}, .Subtype = 0x02, - + .Capabilities = 0x06, }, - - .CDC_Functional_Union = + + .CDC_Functional_Union = { .Header = {.Size = sizeof(USB_Descriptor_CDC_FunctionalUnion_t), .Type = DTYPE_CSInterface}, .Subtype = 0x06, - + .MasterInterfaceNumber = 0, .SlaveInterfaceNumber = 1, }, - .CDC_NotificationEndpoint = + .CDC_NotificationEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM), .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_NOTIFICATION_EPSIZE, .PollingIntervalMS = 0xFF }, - .CDC_DCI_Interface = + .CDC_DCI_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 2, - + .Class = 0x0A, .SubClass = 0x00, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .CDC_DataOutEndpoint = + .CDC_DataOutEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, .PollingIntervalMS = 0x00 }, - - .CDC_DataInEndpoint = + + .CDC_DataInEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - + .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM), .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), .EndpointSize = CDC_TXRX_EPSIZE, @@ -193,7 +193,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -204,7 +204,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -215,7 +215,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA CDC Demo" }; @@ -241,30 +241,31 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &DeviceDescriptor; Size = sizeof(USB_Descriptor_Device_t); break; - case DTYPE_Configuration: + case DTYPE_Configuration: Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { - case 0x00: + case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h index 44cf084b6..7a8da898e 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Descriptors.h +++ b/Demos/Device/LowLevel/VirtualSerial/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -40,22 +40,22 @@ #include <LUFA/Drivers/USB/USB.h> #include <avr/pgmspace.h> - + /* Macros: */ /** Endpoint number of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPNUM 2 /** Endpoint number of the CDC device-to-host data IN endpoint. */ - #define CDC_TX_EPNUM 3 + #define CDC_TX_EPNUM 3 /** Endpoint number of the CDC host-to-device data OUT endpoint. */ - #define CDC_RX_EPNUM 4 + #define CDC_RX_EPNUM 4 /** Size in bytes of the CDC device-to-host notification IN endpoint. */ #define CDC_NOTIFICATION_EPSIZE 8 /** Size in bytes of the CDC data IN and OUT endpoints. */ - #define CDC_TXRX_EPSIZE 16 + #define CDC_TXRX_EPSIZE 16 /* Type Defines: */ /** Type define for a CDC class-specific functional header descriptor. This indicates to the host that the device @@ -80,7 +80,7 @@ uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors. */ uint8_t Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. */ } USB_Descriptor_CDC_FunctionalACM_t; - + /** Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific * CDC control and data interfaces are related. See the CDC class specification for more details. */ @@ -116,3 +116,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c index 9189ef3e7..22d65ffe7 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -55,7 +55,7 @@ CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0, int main(void) { SetupHardware(); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); @@ -119,7 +119,7 @@ void EVENT_USB_Device_ConfigurationChanged(void) LineEncoding.BaudRateBPS = 0; /* Indicate endpoint configuration success or failure */ - LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); } /** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific @@ -133,14 +133,14 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { case REQ_GetLineEncoding: if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { + { Endpoint_ClearSETUP(); /* Write the line coding data to the control endpoint */ Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t)); Endpoint_ClearOUT(); } - + break; case REQ_SetLineEncoding: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -151,7 +151,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t)); Endpoint_ClearIN(); } - + break; case REQ_SetControlLineState: if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) @@ -164,7 +164,7 @@ void EVENT_USB_Device_UnhandledControlRequest(void) CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code: */ } - + break; } } @@ -175,11 +175,11 @@ void CDC_Task(void) char* ReportString = NULL; uint8_t JoyStatus_LCL = Joystick_GetStatus(); static bool ActionSent = false; - + /* Device must be connected and configured for the task to run */ if (USB_DeviceState != DEVICE_STATE_Configured) return; - + #if 0 /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232 * handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code: @@ -192,11 +192,11 @@ void CDC_Task(void) .wIndex = 0, .wLength = sizeof(uint16_t), }; - + uint16_t LineStateMask; - + // Set LineStateMask here to a mask of CONTROL_LINE_IN_* masks to set the input handshake line states to send to the host - + Endpoint_SelectEndpoint(CDC_NOTIFICATION_EPNUM); Endpoint_Write_Stream_LE(&Notification, sizeof(Notification)); Endpoint_Write_Stream_LE(&LineStateMask, sizeof(LineStateMask)); @@ -227,20 +227,20 @@ void CDC_Task(void) /* Write the String to the Endpoint */ Endpoint_Write_Stream_LE(ReportString, strlen(ReportString)); - + /* Remember if the packet to send completely fills the endpoint */ bool IsFull = (Endpoint_BytesInEndpoint() == CDC_TXRX_EPSIZE); /* Finalize the stream transfer to send the last packet */ Endpoint_ClearIN(); - /* If the last packet filled the endpoint, send an empty packet to release the buffer on + /* If the last packet filled the endpoint, send an empty packet to release the buffer on * the receiver (otherwise all data will be cached until a non-full packet is received) */ if (IsFull) { /* Wait until the endpoint is ready for another packet */ Endpoint_WaitUntilReady(); - + /* Send an empty packet to ensure that the host does not buffer data sent to it */ Endpoint_ClearIN(); } @@ -248,8 +248,9 @@ void CDC_Task(void) /* Select the Serial Rx Endpoint */ Endpoint_SelectEndpoint(CDC_RX_EPNUM); - + /* Throw away any received data from the host */ if (Endpoint_IsOUTReceived()) Endpoint_ClearOUT(); } + diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h index 650874c96..b95939b53 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -59,9 +59,9 @@ /** CDC Class specific request to set the current virtual serial port handshake line states. */ #define REQ_SetControlLineState 0x22 - + /** Notification type constant for a change in the virtual serial port handshake line states, for - * use with a USB_Notification_Header_t notification structure when sent to the host via the CDC + * use with a USB_Notification_Header_t notification structure when sent to the host via the CDC * notification endpoint. */ #define NOTIF_SerialState 0x20 @@ -75,7 +75,7 @@ * from the host, to indicate that theRTS line state should be high. */ #define CONTROL_LINE_OUT_RTS (1 << 1) - + /** Mask for the DCD handshake line for use with the a NOTIF_SerialState class specific notification * from the device to the host, to indicate that the DCD line state is currently high. */ @@ -110,7 +110,7 @@ * to indicate that a data overrun error has occurred on the virtual serial port. */ #define CONTROL_LINE_IN_OVERRUNERROR (1 << 6) - + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -138,7 +138,7 @@ */ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */ } CDC_Line_Coding_t; - + /** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a * change in the device state asynchronously. */ @@ -152,7 +152,7 @@ uint16_t wIndex; /**< Notification wIndex, notification-specific */ uint16_t wLength; /**< Notification wLength, notification-specific */ } USB_Notification_Header_t; - + /* Enums: */ /** Enum for the possible line encoding formats of a virtual serial port. */ enum CDCDevice_CDC_LineCodingFormats_t @@ -161,7 +161,7 @@ OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits */ TwoStopBits = 2, /**< Each frame contains two stop bits */ }; - + /** Enum for the possible line encoding parity settings of a virtual serial port. */ enum CDCDevice_LineCodingParity_t { @@ -171,14 +171,15 @@ Parity_Mark = 3, /**< Mark parity bit mode on each frame */ Parity_Space = 4, /**< Space parity bit mode on each frame */ }; - + /* Function Prototypes: */ void SetupHardware(void); void CDC_Task(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt index 571168948..4190c2f7d 100644 --- a/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt +++ b/Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Communications Device Class (Virtual Serial Port) Demo * * \section SSec_Compat Demo Compatibility: @@ -28,7 +28,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -42,14 +42,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Communications Device Class demonstration application. * This gives a simple reference application for implementing * a CDC device acting as a virtual serial port. Joystick * actions are transmitted to the host as strings. The device * does not respond to serial data sent from the host. - * + * * After running this demo for the first time on a new computer, * you will need to supply the .INF file located in this demo * project's directory as the device's driver when running under @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile index 18a1e61fd..b556a3b78 100644 --- a/Demos/Device/LowLevel/VirtualSerial/makefile +++ b/Demos/Device/LowLevel/VirtualSerial/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Device/LowLevel/makefile b/Demos/Device/LowLevel/makefile index ed0dc3f36..11594e9f3 100644 --- a/Demos/Device/LowLevel/makefile +++ b/Demos/Device/LowLevel/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -63,3 +63,4 @@ all: $(MAKE) -C Mouse $@ $(MAKE) -C RNDISEthernet $@ $(MAKE) -C VirtualSerial $@ + diff --git a/Demos/Device/makefile b/Demos/Device/makefile index ce80f4e96..f389781e5 100644 --- a/Demos/Device/makefile +++ b/Demos/Device/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -18,3 +18,4 @@ all: %: $(MAKE) -C ClassDriver $@ $(MAKE) -C LowLevel $@ + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c index 6a699b03d..eec1c9310 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,9 +30,9 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ #include "Descriptors.h" @@ -81,22 +81,22 @@ USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = USB_Descriptor_Device_t PROGMEM DeviceDescriptor = { .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - + .USBSpecification = VERSION_BCD(01.10), .Class = 0x00, .SubClass = 0x00, .Protocol = 0x00, - + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - + .VendorID = 0x03EB, .ProductID = 0x2041, .ReleaseNumber = 0x0000, - + .ManufacturerStrIndex = 0x01, .ProductStrIndex = 0x02, .SerialNumStrIndex = NO_DESCRIPTOR, - + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS }; @@ -107,38 +107,38 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), .TotalInterfaces = 1, - + .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .HID_Interface = + + .HID_Interface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0x00, .AlternateSetting = 0x00, - + .TotalEndpoints = 1, - + .Class = 0x03, .SubClass = 0x01, .Protocol = HID_BOOTP_MouseBootProtocol, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .HID_MouseHID = + .HID_MouseHID = { .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, @@ -149,7 +149,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .HIDReportLength = sizeof(MouseReport) }, - .HID_ReportINEndpoint = + .HID_ReportINEndpoint = { .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, @@ -167,7 +167,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = USB_Descriptor_String_t PROGMEM LanguageString = { .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - + .UnicodeString = {LANGUAGE_ID_ENG} }; @@ -178,7 +178,7 @@ USB_Descriptor_String_t PROGMEM LanguageString = USB_Descriptor_String_t PROGMEM ManufacturerString = { .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String}, - + .UnicodeString = L"Dean Camera" }; @@ -189,7 +189,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString = USB_Descriptor_String_t PROGMEM ProductString = { .Header = {.Size = USB_STRING_LEN(15), .Type = DTYPE_String}, - + .UnicodeString = L"LUFA Mouse Demo" }; @@ -235,19 +235,19 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; - case HID_DTYPE_HID: + case HID_DTYPE_HID: Address = &ConfigurationDescriptor.HID_MouseHID; Size = sizeof(USB_HID_Descriptor_HID_t); break; - case HID_DTYPE_Report: + case HID_DTYPE_Report: Address = &MouseReport; Size = sizeof(MouseReport); break; } - - *DescriptorAddress = Address; + + *DescriptorAddress = Address; return Size; } diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h index f482a6946..243c88d35 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -54,11 +54,11 @@ USB_HID_Descriptor_HID_t HID_MouseHID; USB_Descriptor_Endpoint_t HID_ReportINEndpoint; } USB_Descriptor_Configuration_t; - + /* Macros: */ /** Endpoint number of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPNUM 1 - + /** Size in bytes of the Mouse HID reporting IN endpoint. */ #define MOUSE_EPSIZE 8 @@ -69,3 +69,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c index be01a2d6b..d9d323e0c 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -57,7 +57,7 @@ USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface = .PrevReportINBufferSize = sizeof(PrevMouseHIDReportBuffer), }, }; - + /** Event handler for the library USB WakeUp event. */ void EVENT_USB_Device_Connect(void) @@ -111,7 +111,7 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn uint16_t* const ReportSize) { USB_MouseReport_Data_t* MouseReport = (USB_MouseReport_Data_t*)ReportData; - + uint8_t JoyStatus_LCL = Joystick_GetStatus(); uint8_t ButtonStatus_LCL = Buttons_GetStatus(); @@ -127,10 +127,10 @@ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDIn if (JoyStatus_LCL & JOY_PRESS) MouseReport->Button |= (1 << 0); - + if (ButtonStatus_LCL & BUTTONS_BUTTON1) MouseReport->Button |= (1 << 1); - + *ReportSize = sizeof(USB_MouseReport_Data_t); return true; } @@ -151,3 +151,4 @@ void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDI { // Unused (but mandatory for the HID class driver) in this demo, since there are no Host->Device reports } + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h index 90db85f17..3b3a3797c 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/DeviceFunctions.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,10 +38,10 @@ /* Includes: */ #include "MouseHostDevice.h" - + /* External Variables: */ extern USB_ClassInfo_HID_Device_t Mouse_HID_Device_Interface; - + /* Function Prototypes: */ bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, uint8_t* const ReportID, @@ -49,7 +49,7 @@ void* ReportData, uint16_t* const ReportSize); void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo, - const uint8_t ReportID, + const uint8_t ReportID, const uint8_t ReportType, const void* ReportData, const uint16_t ReportSize); @@ -59,5 +59,6 @@ void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); void EVENT_USB_Device_StartOfFrame(void); - + #endif + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c index 4e794dcf2..786713ac5 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Host Mode USB Mouse functionality for the MouseHostDevice demo. This file contains the Host mode * USB Mouse related code of the demo and is responsible for all the Host mode Mouse functionality. */ - + #include "HostFunctions.h" /** LUFA HID Class driver interface configuration and state information. This structure is @@ -46,7 +46,7 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface = { .DataINPipeNumber = 1, .DataOUTPipeNumber = 2, - + .HIDInterfaceProtocol = HID_BOOTP_MouseBootProtocol, }, }; @@ -100,7 +100,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -113,7 +113,7 @@ void MouseHostTask(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -134,7 +134,7 @@ void MouseHostTask(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { printf("Error Setting Device Configuration.\r\n"); @@ -150,18 +150,18 @@ void MouseHostTask(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf("Mouse Enumerated.\r\n"); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: if (HID_Host_IsReportReceived(&Mouse_HID_Host_Interface)) - { + { uint8_t LEDMask = LEDS_NO_LEDS; - + USB_MouseReport_Data_t MouseReport; HID_Host_ReceiveReport(&Mouse_HID_Host_Interface, &MouseReport); - + printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X, MouseReport.Y, MouseReport.Button); @@ -169,7 +169,7 @@ void MouseHostTask(void) LEDMask |= LEDS_LED1; else if (MouseReport.X < 0) LEDMask |= LEDS_LED2; - + if (MouseReport.Y > 0) LEDMask |= LEDS_LED3; else if (MouseReport.Y < 0) @@ -184,3 +184,4 @@ void MouseHostTask(void) break; } } + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h index fe5214e0a..7aaf0042d 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/HostFunctions.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,13 +38,13 @@ /* Includes: */ #include "MouseHostDevice.h" - + /* External Variables: */ extern USB_ClassInfo_HID_Host_t Mouse_HID_Host_Interface; /* Function Prototypes: */ void MouseHostTask(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -53,3 +53,4 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void); #endif + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c index 38acd8562..568791bc5 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,9 +33,9 @@ * Main source file for the MouseHostDevice demo. This file contains the main tasks of * the demo and is responsible for the overall control flow of the demo. */ - + #include "MouseHostDevice.h" - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -88,6 +88,7 @@ void EVENT_USB_UIDChange(void) { printf_P(PSTR(ESC_FG_YELLOW "UID Change to %S mode\r\n" ESC_FG_WHITE), (USB_CurrentMode == USB_MODE_Device) ? PSTR("Device") : PSTR("Host")); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); } + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h index 1da4936ae..4b4e1ac1f 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -52,11 +52,11 @@ #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + #include "Descriptors.h" #include "DeviceFunctions.h" #include "HostFunctions.h" - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -69,8 +69,9 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); - + #endif + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt index de56b55f0..a81a3a075 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/MouseHostDevice.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Host/Device Dual Role Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -39,24 +39,24 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse host/device dual role demonstration application. This gives a simple * reference application for implementing a dual role USB Mouse, for USB mice * using the standard mouse boot protocol HID profile. - * + * * <b>When in host mode:</b> * Mouse movement and button presses are displayed on the board LEDs, * as well as printed out the serial terminal as formatted dY, dY and * button status information. - * + * * This uses a naive method where the mouse is set to Boot Protocol mode, so * that the report structure is fixed and known. A better implementation * uses the HID report parser for correct report data processing across * all compatible mice with advanced characteristics, as shown in the * MouseHostWithParser Host demo application. - * - * Currently only single interface mice are supported. + * + * Currently only single interface mice are supported. * * <b>When in device mode:</b> * Upon enumeration the system will automatically enumerate and function @@ -77,3 +77,4 @@ * </tr> * </table> */ + diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile index 703bae5af..0ed12ad21 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/makefile +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -138,7 +138,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -151,7 +151,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -265,7 +265,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -278,7 +278,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -290,7 +290,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -302,7 +302,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -325,7 +325,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -359,7 +359,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -393,7 +393,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -422,7 +422,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -441,10 +441,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -509,11 +509,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -540,9 +540,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -640,14 +640,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -669,7 +669,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -713,3 +713,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/DualRole/ClassDriver/makefile b/Demos/DualRole/ClassDriver/makefile index 98d7a6807..f50c37f18 100644 --- a/Demos/DualRole/ClassDriver/makefile +++ b/Demos/DualRole/ClassDriver/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -19,3 +19,4 @@ all: %: $(MAKE) -C MouseHostDevice $@ + diff --git a/Demos/DualRole/makefile b/Demos/DualRole/makefile index 2e863bbad..7a0008f05 100644 --- a/Demos/DualRole/makefile +++ b/Demos/DualRole/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -17,3 +17,4 @@ all: %: $(MAKE) -C ClassDriver/ $@ + diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c index fb48c2b17..8d87e88c2 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the JoystickHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "JoystickHostWithParser.h" /** Processed HID report descriptor items structure, containing information on each HID report element */ @@ -52,14 +52,14 @@ USB_ClassInfo_HID_Host_t Joystick_HID_Interface = .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, - + .HIDInterfaceProtocol = HID_BOOTP_NonBootProtocol, - + .HIDParserData = &HIDReportInfo }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -78,7 +78,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -99,7 +99,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -115,7 +115,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Joystick Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; @@ -131,7 +131,7 @@ int main(void) for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++) { HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber]; - + /* Update the report item value if it is contained within the current report */ if (!(USB_GetHIDReportItemInfo(JoystickReport, ReportItem))) continue; @@ -149,7 +149,7 @@ int main(void) (ReportItem->ItemType == HID_REPORT_ITEM_In)) { int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t); - + if (DeltaMovement) { if (ReportItem->Attributes.Usage.Usage == USAGE_X) @@ -159,13 +159,13 @@ int main(void) } } } - + LEDs_SetAllLEDs(LEDMask); } - + break; } - + HID_Host_USBTask(&Joystick_HID_Interface); USB_USBTask(); } @@ -235,7 +235,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -277,3 +277,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) || (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL)); } + diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h index 1cebb924c..51f641dd4 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -78,17 +78,18 @@ /** HID Report Descriptor Usage value for a Y axis movement. */ #define USAGE_Y 0x31 - + /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt index 055890b70..0fa97f868 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/JoystickHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Joystick Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,19 +41,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Joystick host demonstration application. This gives a simple reference * application for implementing a USB Joystick host, for USB joysticks using * the standard joystick HID profile. It uses a HID parser for the HID * reports, allowing for correct operation across all USB joysticks. This * demo supports joysticks with a single HID report. - * + * * Joystick movement and button presses are displayed on the board LEDs. * On connection to a USB joystick, the report items will be processed and * printed as a formatted list through the USART before the joystick is * fully enumerated. - * + * * Currently only single interface joysticks are supported. * * \section SSec_Options Project Options @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile index a82f4e29c..a585f3f9f 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/makefile +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c index ddce64c24..9b7941e5f 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the KeyboardHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "KeyboardHost.h" /** LUFA HID Class driver interface configuration and state information. This structure is @@ -49,12 +49,12 @@ USB_ClassInfo_HID_Host_t Keyboard_HID_Interface = .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, - + .HIDInterfaceProtocol = HID_BOOTP_KeyboardBootProtocol, }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -66,14 +66,14 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { switch (USB_HostState) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -94,7 +94,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -110,7 +110,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Keyboard Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; @@ -118,11 +118,11 @@ int main(void) case HOST_STATE_Configured: if (HID_Host_IsReportReceived(&Keyboard_HID_Interface)) { - USB_KeyboardReport_Data_t KeyboardReport; + USB_KeyboardReport_Data_t KeyboardReport; HID_Host_ReceiveReport(&Keyboard_HID_Interface, &KeyboardReport); LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0); - + uint8_t PressedKeyCode = KeyboardReport.KeyCode[0]; if (PressedKeyCode) @@ -130,25 +130,25 @@ int main(void) char PressedKey = 0; LEDs_ToggleLEDs(LEDS_LED2); - + /* Retrieve pressed key character if alphanumeric */ if ((PressedKeyCode >= 0x04) && (PressedKeyCode <= 0x1D)) PressedKey = (PressedKeyCode - 0x04) + 'A'; else if ((PressedKeyCode >= 0x1E) && (PressedKeyCode <= 0x27)) PressedKey = (PressedKeyCode - 0x1E) + '0'; else if (PressedKeyCode == 0x2C) - PressedKey = ' '; + PressedKey = ' '; else if (PressedKeyCode == 0x28) PressedKey = '\n'; - + if (PressedKey) putchar(PressedKey); } } - + break; } - + HID_Host_USBTask(&Keyboard_HID_Interface); USB_USBTask(); } @@ -218,6 +218,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h index fd6b83882..a569162e5 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,15 +63,16 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt index 5f2969d28..752807e5a 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt +++ b/Demos/Host/ClassDriver/KeyboardHost/KeyboardHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -39,21 +39,21 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard host demonstration application. This gives a simple reference * application for implementing a USB keyboard, for USB keyboards using * the standard keyboard HID profile. - * + * * Pressed alpha-numeric, enter or space key is transmitted through the serial * USART at serial settings 9600, 8, N, 1. - * + * * This uses a naive method where the keyboard is set to Boot Protocol mode, so * that the report structure is fixed and known. A better implementation * uses the HID report parser for correct report data processing across * all compatible mice with advanced characteristics, as shown in the * KeyboardHostWithParser demo application. - * + * * Currently only single interface keyboards are supported. * * \section SSec_Options Project Options @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/KeyboardHost/makefile b/Demos/Host/ClassDriver/KeyboardHost/makefile index fa7f60717..8dc1791bc 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/makefile +++ b/Demos/Host/ClassDriver/KeyboardHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c index 3fd23f051..5f10d8bf7 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "KeyboardHostWithParser.h" /** Processed HID report descriptor items structure, containing information on each HID report element */ @@ -52,14 +52,14 @@ USB_ClassInfo_HID_Host_t Keyboard_HID_Interface = .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, - + .HIDInterfaceProtocol = HID_BOOTP_NonBootProtocol, - + .HIDParserData = &HIDReportInfo }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -78,7 +78,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -99,7 +99,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -115,7 +115,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Keyboard Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; @@ -125,7 +125,7 @@ int main(void) { uint8_t KeyboardReport[Keyboard_HID_Interface.State.LargestReportSize]; HID_Host_ReceiveReport(&Keyboard_HID_Interface, &KeyboardReport); - + for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++) { HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber]; @@ -157,24 +157,24 @@ int main(void) else if ((KeyCode >= 0x1E) && (KeyCode <= 0x27)) PressedKey = (KeyCode - 0x1E) + '0'; else if (KeyCode == 0x2C) - PressedKey = ' '; + PressedKey = ' '; else if (KeyCode == 0x28) PressedKey = '\n'; - + /* Print the pressed key character out through the serial port if valid */ if (PressedKey) putchar(PressedKey); } - + /* Once a scan-code is found, stop scanning through the report items */ break; } } } - + break; } - + HID_Host_USBTask(&Keyboard_HID_Interface); USB_USBTask(); } @@ -244,7 +244,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -265,3 +265,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) */ return (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_KEYBOARD); } + diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h index 5ecfdf458..b31d5cb66 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,20 +63,21 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** HID Report Descriptor Usage Page value for a desktop keyboard. */ #define USAGE_PAGE_KEYBOARD 0x07 /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt index 5e122a38f..50f6c861d 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/KeyboardHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,20 +41,20 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard host demonstration application. This gives a simple reference * application for implementing a USB Keyboard host, for USB keyboards using * the standard Keyboard HID profile. It uses a HID parser for the HID reports, * allowing for correct operation across all USB keyboards. This demo supports * keyboards with a single HID report. - * + * * Pressed alpha-numeric, enter or space key is transmitted through the serial * USART at serial settings 9600, 8, N, 1. On connection to a USB keyboard, the * report items will be processed and printed as a formatted list through the * USART before the keyboard is fully enumerated. - * - * Currently only single interface keyboards are supported. + * + * Currently only single interface keyboards are supported. * * \section SSec_Options Project Options * @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile index a3c1aab0c..90ec16242 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c index faaebdd7c..a4d00cef7 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MIDIHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MIDIHost.h" /** LUFA MIDI Class driver interface configuration and state information. This structure is @@ -46,13 +46,13 @@ USB_ClassInfo_MIDI_Host_t Keyboard_MIDI_Interface = { .DataINPipeNumber = 1, .DataINPipeDoubleBank = false, - + .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -71,7 +71,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -92,7 +92,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -100,20 +100,20 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("MIDI Device Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: CheckJoystickMovement(); - + MIDI_EventPacket_t MIDIEvent; if (MIDI_Host_ReceiveEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent)) { bool NoteOnEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_ON >> 4)); bool NoteOffEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_OFF >> 4)); - + if (NoteOnEvent || NoteOffEvent) { printf_P(PSTR("MIDI Note %s - Channel %d, Pitch %d, Velocity %d\r\n"), NoteOnEvent ? "On" : "Off", @@ -121,10 +121,10 @@ int main(void) MIDIEvent.Data2, MIDIEvent.Data3); } } - + break; } - + MIDI_Host_USBTask(&Keyboard_MIDI_Interface); USB_USBTask(); } @@ -154,11 +154,11 @@ void CheckJoystickMovement(void) uint8_t MIDICommand = 0; uint8_t MIDIPitch; - + /* Get current joystick mask, XOR with previous to detect joystick changes */ uint8_t JoystickStatus = Joystick_GetStatus(); uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus); - + /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1)); @@ -179,7 +179,7 @@ void CheckJoystickMovement(void) MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3E; } - + if (JoystickChanges & JOY_DOWN) { MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); @@ -191,19 +191,19 @@ void CheckJoystickMovement(void) MIDICommand = ((JoystickStatus & JOY_PRESS)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3B; } - + if (MIDICommand) { MIDI_EventPacket_t MIDIEvent = (MIDI_EventPacket_t) { .CableNumber = 0, .Command = (MIDICommand >> 4), - + .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, - .Data3 = MIDI_STANDARD_VELOCITY, + .Data3 = MIDI_STANDARD_VELOCITY, }; - + MIDI_Host_SendEventPacket(&Keyboard_MIDI_Interface, &MIDIEvent); MIDI_Host_Flush(&Keyboard_MIDI_Interface); } @@ -259,6 +259,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h index 84e7680f3..977eabbd3 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -52,7 +52,7 @@ #include <LUFA/Drivers/Board/Joystick.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/MIDI.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -65,16 +65,17 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CheckJoystickMovement(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt index a90ae04d3..337dba72e 100644 --- a/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt +++ b/Demos/Host/ClassDriver/MIDIHost/MIDIHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage MIDI Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>MIDI Subclass</td> * </tr> @@ -39,7 +39,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note * on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to @@ -57,3 +57,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/MIDIHost/makefile b/Demos/Host/ClassDriver/MIDIHost/makefile index 6de81be84..64a05e1e6 100644 --- a/Demos/Host/ClassDriver/MIDIHost/makefile +++ b/Demos/Host/ClassDriver/MIDIHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c index 40cf2a48d..7f8ba9544 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MassStorageHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MassStorageHost.h" /** LUFA Mass Storage Class driver interface configuration and state information. This structure is @@ -46,13 +46,13 @@ USB_ClassInfo_MS_Host_t FlashDisk_MS_Interface = { .DataINPipeNumber = 1, .DataINPipeDoubleBank = false, - + .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -71,7 +71,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -92,7 +92,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -100,14 +100,14 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Mass Storage Device Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - + uint8_t MaxLUNIndex; if (MS_Host_GetMaxLUN(&FlashDisk_MS_Interface, &MaxLUNIndex)) { @@ -116,9 +116,9 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MaxLUNIndex + 1)); - + if (MS_Host_ResetMSInterface(&FlashDisk_MS_Interface)) { puts_P(PSTR("Error resetting Mass Storage interface.\r\n")); @@ -126,7 +126,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + SCSI_Request_Sense_Response_t SenseData; if (MS_Host_RequestSense(&FlashDisk_MS_Interface, 0, &SenseData) != 0) { @@ -135,7 +135,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (MS_Host_PreventAllowMediumRemoval(&FlashDisk_MS_Interface, 0, true)) { puts_P(PSTR("Error setting Prevent Device Removal bit.\r\n")); @@ -150,17 +150,17 @@ int main(void) puts_P(PSTR("Error retrieving device Inquiry data.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_ERROR); USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID); - + puts_P(PSTR("Waiting until ready...\r\n")); for (;;) { uint8_t ErrorCode = MS_Host_TestUnitReady(&FlashDisk_MS_Interface, 0); - + if (!(ErrorCode)) break; @@ -184,7 +184,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize); uint8_t BlockBuffer[DiskCapacity.BlockSize]; @@ -196,20 +196,20 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("\r\nContents of first block:\r\n")); for (uint16_t Chunk = 0; Chunk < (DiskCapacity.BlockSize >> 4); Chunk++) { uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4]; - + /* Print out the 16 bytes of the chunk in HEX format */ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++) { char CurrByte = *(ChunkPtr + ByteOffset); printf_P(PSTR("%.2X "), CurrByte); } - + printf_P(PSTR(" ")); /* Print out the 16 bytes of the chunk in ASCII format */ @@ -218,7 +218,7 @@ int main(void) char CurrByte = *(ChunkPtr + ByteOffset); putchar(isprint(CurrByte) ? CurrByte : '.'); } - + printf_P(PSTR("\r\n")); } @@ -226,7 +226,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + MS_Host_USBTask(&FlashDisk_MS_Interface); USB_USBTask(); } @@ -296,6 +296,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h index b99471205..af8470cf0 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -51,7 +51,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/MassStorage.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -64,18 +64,19 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt index 23f083dea..45d78c43b 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt +++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mass Storage Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Mass Storage Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bulk Only</td> * </tr> @@ -42,12 +42,12 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mass Storage host demonstration application. This gives a simple reference * application for implementing a USB Mass Storage host, for USB storage devices * using the standard Mass Storage USB profile. - * + * * The first 512 bytes (boot sector) of an attached disk's memory will be dumped * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287 * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents @@ -65,3 +65,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/MassStorageHost/makefile b/Demos/Host/ClassDriver/MassStorageHost/makefile index 3e947f2c0..a3b7ff178 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/makefile +++ b/Demos/Host/ClassDriver/MassStorageHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -134,7 +134,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -147,7 +147,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -298,7 +298,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -321,7 +321,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -418,7 +418,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -505,11 +505,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -636,14 +636,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.c b/Demos/Host/ClassDriver/MouseHost/MouseHost.c index d76f048d9..c34a2fcb6 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.c +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MouseHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MouseHost.h" /** LUFA HID Class driver interface configuration and state information. This structure is @@ -46,15 +46,15 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface = { .DataINPipeNumber = 1, .DataINPipeDoubleBank = false, - + .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, - + .HIDInterfaceProtocol = HID_BOOTP_MouseBootProtocol, }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -73,7 +73,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -94,7 +94,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -110,7 +110,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Mouse Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; @@ -119,10 +119,10 @@ int main(void) if (HID_Host_IsReportReceived(&Mouse_HID_Interface)) { uint8_t LEDMask = LEDS_NO_LEDS; - + USB_MouseReport_Data_t MouseReport; HID_Host_ReceiveReport(&Mouse_HID_Interface, &MouseReport); - + printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X, MouseReport.Y, MouseReport.Button); @@ -130,7 +130,7 @@ int main(void) LEDMask |= LEDS_LED1; else if (MouseReport.X < 0) LEDMask |= LEDS_LED2; - + if (MouseReport.Y > 0) LEDMask |= LEDS_LED3; else if (MouseReport.Y < 0) @@ -141,10 +141,10 @@ int main(void) LEDs_SetAllLEDs(LEDMask); } - + break; } - + HID_Host_USBTask(&Mouse_HID_Interface); USB_USBTask(); } @@ -214,6 +214,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.h b/Demos/Host/ClassDriver/MouseHost/MouseHost.h index 7664580cb..c5567ed38 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.h +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,15 +63,16 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/MouseHost/MouseHost.txt b/Demos/Host/ClassDriver/MouseHost/MouseHost.txt index be608db2f..b659abada 100644 --- a/Demos/Host/ClassDriver/MouseHost/MouseHost.txt +++ b/Demos/Host/ClassDriver/MouseHost/MouseHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,23 +41,23 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse host demonstration application. This gives a simple reference * application for implementing a USB Mouse host, for USB mice using * the standard mouse HID profile. - * + * * Mouse movement and button presses are displayed on the board LEDs, * as well as printed out the serial terminal as formatted dY, dY and * button status information. - * + * * This uses a naive method where the mouse is set to Boot Protocol mode, so * that the report structure is fixed and known. A better implementation * uses the HID report parser for correct report data processing across * all compatible mice with advanced characteristics, as shown in the * MouseHostWithParser demo application. - * - * Currently only single interface mice are supported. + * + * Currently only single interface mice are supported. * * \section SSec_Options Project Options * @@ -71,3 +71,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/MouseHost/makefile b/Demos/Host/ClassDriver/MouseHost/makefile index 6d8ea3a8d..0812c5cb1 100644 --- a/Demos/Host/ClassDriver/MouseHost/makefile +++ b/Demos/Host/ClassDriver/MouseHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c index d02424c7b..7948e2c49 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MouseHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MouseHostWithParser.h" /** Processed HID report descriptor items structure, containing information on each HID report element */ @@ -52,14 +52,14 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface = .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, - + .HIDInterfaceProtocol = HID_BOOTP_NonBootProtocol, - + .HIDParserData = &HIDReportInfo }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -78,7 +78,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -99,7 +99,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -115,7 +115,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Mouse Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; @@ -131,11 +131,11 @@ int main(void) for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++) { HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber]; - + /* Update the report item value if it is contained within the current report */ if (!(USB_GetHIDReportItemInfo(MouseReport, ReportItem))) continue; - + /* Determine what report item is being tested, process updated value as needed */ if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) && (ReportItem->ItemType == HID_REPORT_ITEM_In)) @@ -148,7 +148,7 @@ int main(void) (ReportItem->ItemType == HID_REPORT_ITEM_In)) { int16_t WheelDelta = HID_ALIGN_DATA(ReportItem, int16_t); - + if (WheelDelta) LEDMask = (LEDS_LED1 | LEDS_LED2 | ((WheelDelta > 0) ? LEDS_LED3 : LEDS_LED4)); } @@ -158,7 +158,7 @@ int main(void) (ReportItem->ItemType == HID_REPORT_ITEM_In)) { int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t); - + if (DeltaMovement) { if (ReportItem->Attributes.Usage.Usage == USAGE_X) @@ -168,13 +168,13 @@ int main(void) } } } - + LEDs_SetAllLEDs(LEDMask); } - + break; } - + HID_Host_USBTask(&Mouse_HID_Interface); USB_USBTask(); } @@ -244,7 +244,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -286,3 +286,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) || (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL)); } + diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h index 3b26cead5..e4958b7c5 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/HID.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -78,20 +78,21 @@ /** HID Report Descriptor Usage value for a Y axis movement. */ #define USAGE_Y 0x31 - + /** HID Report Descriptor Usage value for a Scroll Wheel movement. */ #define USAGE_SCROLL_WHEEL 0x38 /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt index febd4a939..fdcdb6153 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt +++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,19 +41,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse host demonstration application. This gives a simple reference * application for implementing a USB Mouse host, for USB mice using * the standard mouse HID profile. It uses a HID parser for the HID * reports, allowing for correct operation across all USB mice. This * demo supports mice with a single HID report. - * + * * Mouse and scroll wheel movement and button presses are displayed * on the board LEDs. On connection to a USB mouse, the report items * will be processed and printed as a formatted list through the USART * before the mouse is fully enumerated. - * + * * Currently only single interface mice are supported. * * \section SSec_Options Project Options @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile index aacce7a04..48923b2de 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile +++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c index 66c4f1302..2d776fd5d 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the PrinterHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "PrinterHost.h" /** LUFA Printer Class driver interface configuration and state information. This structure is @@ -46,7 +46,7 @@ USB_ClassInfo_PRNT_Host_t Printer_PRNT_Interface = { .DataINPipeNumber = 1, .DataINPipeDoubleBank = false, - + .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, }, @@ -70,7 +70,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -91,7 +91,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -99,7 +99,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (PRNT_Host_SetBidirectionalMode(&Printer_PRNT_Interface) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Bidirectional Mode.\r\n")); @@ -107,16 +107,16 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Printer Device Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - + puts_P(PSTR("Retrieving Device ID...\r\n")); - + char DeviceIDString[300]; if (PRNT_Host_GetDeviceID(&Printer_PRNT_Interface, DeviceIDString, sizeof(DeviceIDString)) != HOST_SENDCONTROL_Successful) @@ -126,12 +126,12 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Device ID: %s.\r\n"), DeviceIDString); - + char TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X"; uint16_t TestPageLength = strlen(TestPageData); - + printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength); if (PRNT_Host_SendString(&Printer_PRNT_Interface, &TestPageData, TestPageLength) != PIPE_RWSTREAM_NoError) @@ -148,7 +148,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + PRNT_Host_USBTask(&Printer_PRNT_Interface); USB_USBTask(); } @@ -218,6 +218,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h index a2b90a69d..120dec40f 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Printer.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,18 +63,19 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt index fab6a5b84..21780998e 100644 --- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt +++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Printer Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Printer Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bidirectional Protocol</td> * </tr> @@ -41,16 +41,16 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Printer host demonstration application. This gives a simple reference * application for implementing a USB Printer host, for USB printers using * the bidirectional data encapsulation protocol and PCL language. - * + * * Upon connection of a compatible printer, the printer's device ID is sent * to the AVR's serial port, and a simple test page is printed using the PCL * printer language. - * + * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. @@ -63,3 +63,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/PrinterHost/makefile b/Demos/Host/ClassDriver/PrinterHost/makefile index b98ec7796..15c267882 100644 --- a/Demos/Host/ClassDriver/PrinterHost/makefile +++ b/Demos/Host/ClassDriver/PrinterHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c index b793db928..69fa25cd7 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the RNDISEthernetHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "RNDISEthernetHost.h" /** Buffer to hold incoming and outgoing Ethernet packets. */ @@ -55,11 +55,11 @@ USB_ClassInfo_RNDIS_Host_t Ethernet_RNDIS_Interface = .NotificationPipeNumber = 3, .NotificationPipeDoubleBank = false, - + .HostMaxPacketSize = sizeof(PacketBuffer), }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -78,7 +78,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -99,7 +99,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -107,18 +107,18 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Initializing Device.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_ERROR); USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } - + printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), Ethernet_RNDIS_Interface.State.DeviceMaxPacketSize); - + uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST | REMOTE_NDIS_PACKET_ALL_MULTICAST); if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_CURRENT_PACKET_FILTER, &PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful) @@ -129,7 +129,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + uint32_t VendorID; if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_VENDOR_ID, &VendorID, sizeof(VendorID)) != HOST_SENDCONTROL_Successful) @@ -140,7 +140,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Device Vendor ID: 0x%08lX\r\n"), VendorID); puts_P(PSTR("RNDIS Device Enumerated.\r\n")); @@ -149,10 +149,10 @@ int main(void) break; case HOST_STATE_Configured: PrintIncomingPackets(); - + break; } - + RNDIS_Host_USBTask(&Ethernet_RNDIS_Interface); USB_USBTask(); } @@ -167,14 +167,14 @@ void PrintIncomingPackets(void) uint16_t PacketLength; RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, &PacketBuffer, &PacketLength); - + printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength); - + for (uint16_t i = 0; i < PacketLength; i++) printf("0x%02x ", PacketBuffer[i]); printf_P(PSTR("\r\n\r\n")); - + LEDs_SetAllLEDs(LEDMASK_USB_READY); } } @@ -243,6 +243,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h index f3c04f593..56a6fe94e 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/RNDIS.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,19 +63,20 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 /* Function Prototypes: */ void SetupHardware(void); void PrintIncomingPackets(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt index 9fec00bec..a989bc51a 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/RNDISEthernetHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage RNDIS Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> @@ -39,12 +39,12 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * RNDIS host demonstration application. This gives a simple reference * application for implementing a RNDIS Ethernet host, for USB devices such as * modems. - * + * * This demo will enumerate an attached USB RNDIS device, print out its vendor ID * and any received packets in raw form through the serial USART. * @@ -60,3 +60,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile index ff783f0b7..8453a491d 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/makefile +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c index f5d1b23fd..35d41d4c4 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the StillImageHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "StillImageHost.h" /** LUFA Still Image Class driver interface configuration and state information. This structure is @@ -46,10 +46,10 @@ USB_ClassInfo_SI_Host_t DigitalCamera_SI_Interface = { .DataINPipeNumber = 1, .DataINPipeDoubleBank = false, - + .DataOUTPipeNumber = 2, .DataOUTPipeDoubleBank = false, - + .EventsPipeNumber = 3, .EventsPipeDoubleBank = false, }, @@ -73,7 +73,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -94,7 +94,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -102,14 +102,14 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Still Image Device Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: puts_P(PSTR("Opening Session...\r\n")); - + if (SI_Host_OpenSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError) { puts_P(PSTR("Could not open PIMA session.\r\n")); @@ -124,7 +124,7 @@ int main(void) { puts_P(PSTR("Could not turn off device.\r\n")); USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } puts_P(PSTR("Device Off.\r\n")); @@ -137,12 +137,12 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + SI_Host_USBTask(&DigitalCamera_SI_Interface); USB_USBTask(); } @@ -212,6 +212,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h index 1b776596b..3f4375dc7 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/StillImage.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,15 +63,16 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt index 95a2e14b5..2dc3b662b 100644 --- a/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt +++ b/Demos/Host/ClassDriver/StillImageHost/StillImageHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Still Image Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Still Image Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -40,12 +40,12 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Still Image host demonstration application. This gives a simple reference * application for implementing a Still Image host, for USB devices such as * digital cameras. - * + * * This demo will enumerate an attached USB Still Image device, print out its * information structure, open a session with the device and finally close the * session. @@ -62,3 +62,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/StillImageHost/makefile b/Demos/Host/ClassDriver/StillImageHost/makefile index 6c36513b2..8c6cdb53e 100644 --- a/Demos/Host/ClassDriver/StillImageHost/makefile +++ b/Demos/Host/ClassDriver/StillImageHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c index c48694274..bca146e35 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the VirtualSerialHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "VirtualSerialHost.h" /** LUFA CDC Class driver interface configuration and state information. This structure is @@ -54,7 +54,7 @@ USB_ClassInfo_CDC_Host_t VirtualSerial_CDC_Interface = .NotificationPipeDoubleBank = false, }, }; - + /** Main program entry point. This routine configures the hardware required by the application, then * enters a loop to run the application tasks in sequence. */ @@ -73,7 +73,7 @@ int main(void) { case HOST_STATE_Addressed: LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + uint16_t ConfigDescriptorSize; uint8_t ConfigDescriptorData[512]; @@ -94,7 +94,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful) { puts_P(PSTR("Error Setting Device Configuration.\r\n")); @@ -102,7 +102,7 @@ int main(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("CDC Device Enumerated.\r\n")); LEDs_SetAllLEDs(LEDMASK_USB_READY); USB_HostState = HOST_STATE_Configured; @@ -115,10 +115,10 @@ int main(void) if (!(ReceivedByte < 0)) putchar(ReceivedByte); } - + break; } - + CDC_Host_USBTask(&VirtualSerial_CDC_Interface); USB_USBTask(); } @@ -188,6 +188,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h index ed4ffcef7..e873f539f 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/CDC.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -63,15 +63,16 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt index d771b7976..80a470818 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt +++ b/Demos/Host/ClassDriver/VirtualSerialHost/VirtualSerialHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage CDC Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -39,13 +39,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * CDC host demonstration application. This gives a simple reference application * for implementing a USB CDC host, for CDC devices using the standard ACM profile. - * + * * This demo prints out received CDC data through the serial port. - * + * * Not that this demo is only compatible with devices which report the correct CDC * and ACM class, subclass and protocol values. Most USB-Serial cables have vendor * specific features, thus use vendor-specific class/subclass/protocol codes to force @@ -63,3 +63,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/makefile b/Demos/Host/ClassDriver/VirtualSerialHost/makefile index 8bd6949db..38ac416b8 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/makefile +++ b/Demos/Host/ClassDriver/VirtualSerialHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -133,7 +133,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -146,7 +146,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -297,7 +297,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -320,7 +320,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -417,7 +417,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -504,11 +504,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -635,14 +635,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/ClassDriver/makefile b/Demos/Host/ClassDriver/makefile index e1c22d35e..95f8634dc 100644 --- a/Demos/Host/ClassDriver/makefile +++ b/Demos/Host/ClassDriver/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -15,7 +15,7 @@ all: $(MAKE) -C JoystickHostWithParser clean - $(MAKE) -C JoystickHostWithParser all + $(MAKE) -C JoystickHostWithParser all $(MAKE) -C KeyboardHost clean $(MAKE) -C KeyboardHost all @@ -45,8 +45,8 @@ all: $(MAKE) -C StillImageHost all $(MAKE) -C VirtualSerialHost clean - $(MAKE) -C VirtualSerialHost all - + $(MAKE) -C VirtualSerialHost all + %: $(MAKE) -C JoystickHostWithParser $@ $(MAKE) -C KeyboardHost $@ @@ -59,3 +59,4 @@ all: $(MAKE) -C RNDISEthernetHost $@ $(MAKE) -C StillImageHost $@ $(MAKE) -C VirtualSerialHost $@ + diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c index 543e1b879..de4db0c50 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.c @@ -191,3 +191,4 @@ void RFCOMM_ChannelSignalsReceived(RFCOMM_Channel_t* const RFCOMMChannel) {
// Currently do nothing in response to the remote device sending new terminal control signals
}
+ diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h index 336f61d5e..3e1b70457 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothEvents.h @@ -69,3 +69,4 @@ extern RFCOMM_Channel_t* SerialChannel_RFCOMM;
#endif
+ diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c index 8301e85bd..c2139154c 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -52,14 +52,14 @@ int main(void) SetupHardware(); puts_P(PSTR(ESC_FG_CYAN "Bluetooth Host Demo running.\r\n" ESC_FG_WHITE)); - + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); for (;;) { RFCOMM_ServiceChannels(SerialChannel_ACL); - + Bluetooth_Host_Task(); Bluetooth_Stack_USBTask(); USB_USBTask(); @@ -130,7 +130,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -143,7 +143,7 @@ void Bluetooth_Host_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Device Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead) { @@ -153,7 +153,7 @@ void Bluetooth_Host_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDS_LED1); @@ -177,9 +177,9 @@ void Bluetooth_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -189,7 +189,7 @@ void Bluetooth_Host_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDS_LED1); @@ -199,7 +199,7 @@ void Bluetooth_Host_Task(void) } puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n")); - + /* Initialize the Bluetooth stack */ Bluetooth_Stack_Init(); @@ -207,3 +207,4 @@ void Bluetooth_Host_Task(void) break; } } + diff --git a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h index 0814845a0..a5148900f 100644 --- a/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h +++ b/Demos/Host/Incomplete/BluetoothHost/BluetoothHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -54,7 +54,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -73,7 +73,7 @@ /* Task Definitions: */ void Bluetooth_Host_Task(void); - + /* Event Handlers: */ void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -84,5 +84,6 @@ /* Function Prototypes: */ void SetupHardware(void); - + #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c index cc7570387..447bf00a4 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; USB_Descriptor_Endpoint_t* EventsEndpoint = NULL; @@ -67,11 +67,11 @@ uint8_t ProcessConfigurationDescriptor(void) default: return DevControlError; } - + /* The Bluetooth USB transport addendum mandates that the data (not streaming voice) endpoints be in the first interface descriptor (interface 0) */ USB_GetNextDescriptorOfType(&CurrConfigBytesRem, &CurrConfigLocation, DTYPE_Interface); - + /* Ensure that an interface was found, and the end of the descriptor was not reached */ if (!(CurrConfigBytesRem)) return NoCompatibleInterfaceFound; @@ -103,7 +103,7 @@ uint8_t ProcessConfigurationDescriptor(void) DataOUTEndpoint = EndpointData; } } - + /* Configure the Bluetooth data IN pipe */ Pipe_ConfigurePipe(BLUETOOTH_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -125,7 +125,7 @@ uint8_t ProcessConfigurationDescriptor(void) * configuration descriptor, to search for a specific sub descriptor. It can also be used to abort the configuration * descriptor processing if an incompatible descriptor configuration is found. * - * This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the + * This comparator searches for the next Endpoint descriptor inside the current interface descriptor, aborting the * search if another interface descriptor is found before the required endpoint. * * \return A value from the DSEARCH_Return_ErrorCodes_t enum diff --git a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h index 25442b87b..6d1ec2d49 100644 --- a/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,7 +38,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + /* Macros: */ #define BLUETOOTH_DATA_IN_PIPE 1 #define BLUETOOTH_DATA_OUT_PIPE 2 @@ -54,10 +54,11 @@ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ }; - + /* Function Prototypes: */ uint8_t ProcessConfigurationDescriptor(void); - + uint8_t DComp_NextInterfaceBluetoothDataEndpoint(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c index 22a9c3506..707180023 100644 --- a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c +++ b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,7 +30,7 @@ /** \file * - * USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special + * USB Device Descriptor processing routines, to determine the overall device parameters. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine information about * the attached device. */ @@ -50,11 +50,11 @@ uint8_t ProcessDeviceDescriptor(void) /* Send the request to retrieve the device descriptor */ if (USB_Host_GetDeviceDescriptor(&DeviceDescriptor) != HOST_SENDCONTROL_Successful) return DevControlError; - + /* Validate returned data - ensure the returned data is a device descriptor */ if (DeviceDescriptor.Header.Type != DTYPE_Device) return InvalidDeviceDataReturned; - + /* Validate returned device Class, SubClass and Protocol values against the Bluetooth spec values */ if ((DeviceDescriptor.Class != BLUETOOTH_DEVICE_CLASS) || (DeviceDescriptor.SubClass != BLUETOOTH_DEVICE_SUBCLASS) || @@ -62,6 +62,7 @@ uint8_t ProcessDeviceDescriptor(void) { return IncorrectBTDevice; } - + return SuccessfulDeviceRead; } + diff --git a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h index 06bbc8526..1c017d386 100644 --- a/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h +++ b/Demos/Host/Incomplete/BluetoothHost/DeviceDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "BluetoothHost.h" - + /* Macros: */ /** Device Class value for the Bluetooth Device class. */ #define BLUETOOTH_DEVICE_CLASS 0xE0 @@ -62,6 +62,7 @@ }; /* Function Prototypes: */ - uint8_t ProcessDeviceDescriptor(void); + uint8_t ProcessDeviceDescriptor(void); #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c index 939b2ae5f..35b1e920d 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,14 +50,14 @@ void Bluetooth_ACLTask(void) { /* Process incoming ACL packets, if any */ Bluetooth_ProcessIncomingACLPackets(); - + /* Check for any half-open channels, send configuration details to the remote device if found */ for (uint8_t i = 0; i < BLUETOOTH_MAX_OPEN_CHANNELS; i++) { Bluetooth_Channel_t* ChannelData = &Bluetooth_Connection.Channels[i]; - + bool MustSendConfigReq = true; - + /* Check if we are in a channel state which requires a configuration request to be sent */ switch (ChannelData->State) { @@ -71,7 +71,7 @@ void Bluetooth_ACLTask(void) MustSendConfigReq = false; break; } - + /* Only send a configuration request if it the channel was in a state which required it */ if (MustSendConfigReq) { @@ -79,14 +79,14 @@ void Bluetooth_ACLTask(void) { BT_Signal_Header_t SignalCommandHeader; BT_Signal_ConfigurationReq_t ConfigurationRequest; - + struct { BT_Config_Option_Header_t Header; uint16_t Value; } Option_LocalMTU; } PacketData; - + /* Fill out the Signal Command header in the response packet */ PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONFIGURATION_REQUEST; PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; @@ -101,7 +101,7 @@ void Bluetooth_ACLTask(void) PacketData.Option_LocalMTU.Value = ChannelData->LocalMTU; Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); - + BT_ACL_DEBUG(1, ">> L2CAP Configuration Request"); BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.ConfigurationRequest.DestinationChannel); } @@ -119,13 +119,13 @@ static void Bluetooth_ProcessIncomingACLPackets(void) Pipe_SelectPipe(BLUETOOTH_DATA_IN_PIPE); Pipe_Unfreeze(); - + if (!(Pipe_IsReadWriteAllowed())) { Pipe_Freeze(); return; } - + /* Read in the received ACL packet headers when it has been discovered that a packet has been received */ Pipe_Read_Stream_LE(&ACLPacketHeader, sizeof(ACLPacketHeader)); Pipe_Read_Stream_LE(&DataHeader, sizeof(DataHeader)); @@ -143,7 +143,7 @@ static void Bluetooth_ProcessIncomingACLPackets(void) /* Read in the Signal Command header of the incoming packet */ BT_Signal_Header_t SignalCommandHeader; Pipe_Read_Stream_LE(&SignalCommandHeader, sizeof(SignalCommandHeader)); - + /* Dispatch to the appropriate handler function based on the Signal message code */ switch (SignalCommandHeader.Code) { @@ -173,20 +173,20 @@ static void Bluetooth_ProcessIncomingACLPackets(void) break; case BT_SIGNAL_COMMAND_REJECT: BT_ACL_DEBUG(1, "<< Command Reject"); - + uint16_t RejectReason; Pipe_Read_Stream_LE(&RejectReason, sizeof(RejectReason)); Pipe_Discard_Stream(ACLPacketHeader.DataLength - sizeof(RejectReason)); Pipe_ClearIN(); - Pipe_Freeze(); - + Pipe_Freeze(); + BT_ACL_DEBUG(2, "-- Reason: %d", RejectReason); break; default: BT_ACL_DEBUG(1, "<< Unknown Signaling Command 0x%02X", SignalCommandHeader.Code); - + Pipe_Discard_Stream(ACLPacketHeader.DataLength); - Pipe_ClearIN(); + Pipe_ClearIN(); Pipe_Freeze(); break; } @@ -198,7 +198,7 @@ static void Bluetooth_ProcessIncomingACLPackets(void) Pipe_Read_Stream_LE(PacketData, DataHeader.PayloadLength); Pipe_ClearIN(); Pipe_Freeze(); - + Bluetooth_PacketReceived(PacketData, DataHeader.PayloadLength, Bluetooth_GetChannelData(DataHeader.DestinationChannel, CHANNEL_SEARCH_LOCALNUMBER)); } @@ -221,9 +221,9 @@ Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue, /* Closed channels should be ignored as they are not considered valid data */ if (ChannelData->State == BT_Channel_Closed) continue; - + bool FoundMatch = false; - + /* Search the current channel for the search key to see if it matches */ switch (SearchKey) { @@ -237,7 +237,7 @@ Bluetooth_Channel_t* Bluetooth_GetChannelData(const uint16_t SearchValue, FoundMatch = (SearchValue == ChannelData->PSM); break; } - + if (FoundMatch) return ChannelData; } @@ -285,9 +285,9 @@ uint8_t Bluetooth_SendPacket(void* Data, Pipe_Write_Stream_LE(&DataHeader, sizeof(DataHeader)); Pipe_Write_Stream_LE(Data, DataLen); Pipe_ClearOUT(); - + Pipe_Freeze(); - + BT_ACL_DEBUG(2, ""); BT_ACL_DEBUG(2, "Packet Sent"); BT_ACL_DEBUG(2, "-- Connection Handle: 0x%04X", (ACLPacketHeader.ConnectionHandle & 0x0FFF)); @@ -319,7 +319,7 @@ Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM) if (Bluetooth_Connection.Channels[i].State == BT_Channel_Closed) { ChannelData = &Bluetooth_Connection.Channels[i]; - + /* Set the new channel structure's local channel number to a unique value within the connection orientated channel address space */ ChannelData->LocalNumber = (BT_CHANNELNUMBER_BASEOFFSET + i); @@ -336,7 +336,7 @@ Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM) ChannelData->PSM = PSM; ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU; ChannelData->State = BT_Channel_WaitConnectRsp; - + struct { BT_Signal_Header_t SignalCommandHeader; @@ -347,11 +347,11 @@ Bluetooth_Channel_t* Bluetooth_OpenChannel(const uint16_t PSM) PacketData.SignalCommandHeader.Code = BT_SIGNAL_CONNECTION_REQUEST; PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; PacketData.SignalCommandHeader.Length = sizeof(PacketData.ConnectionRequest); - + /* Fill out the Connection Request in the response packet */ PacketData.ConnectionRequest.PSM = PSM; PacketData.ConnectionRequest.SourceChannel = ChannelData->LocalNumber; - + Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); BT_ACL_DEBUG(1, ">> L2CAP Connection Request"); @@ -385,7 +385,7 @@ void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel) BT_Signal_Header_t SignalCommandHeader; BT_Signal_DisconnectionReq_t DisconnectionRequest; } PacketData; - + /* Fill out the Signal Command header in the response packet */ PacketData.SignalCommandHeader.Code = BT_SIGNAL_DISCONNECTION_REQUEST; PacketData.SignalCommandHeader.Identifier = ++Bluetooth_Connection.SignalingIdentifier; @@ -396,10 +396,10 @@ void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel) PacketData.DisconnectionRequest.SourceChannel = ACLChannel->LocalNumber; Bluetooth_SendPacket(&PacketData, sizeof(PacketData), NULL); - + BT_ACL_DEBUG(1, ">> L2CAP Disconnection Request"); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.DisconnectionRequest.DestinationChannel); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.DisconnectionRequest.SourceChannel); + BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", PacketData.DisconnectionRequest.DestinationChannel); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", PacketData.DisconnectionRequest.SourceChannel); } /** Internal Bluetooth stack Signal Command processing routine for a Connection Request command. @@ -409,12 +409,12 @@ void Bluetooth_CloseChannel(Bluetooth_Channel_t* const ACLChannel) static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* const SignalCommandHeader) { BT_Signal_ConnectionReq_t ConnectionRequest; - + Pipe_Read_Stream_LE(&ConnectionRequest, sizeof(ConnectionRequest)); Pipe_ClearIN(); Pipe_Freeze(); - + BT_ACL_DEBUG(1, "<< L2CAP Connection Request"); BT_ACL_DEBUG(2, "-- PSM: 0x%04X", ConnectionRequest.PSM); BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionRequest.SourceChannel); @@ -439,7 +439,7 @@ static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* cons } } } - + uint8_t ChannelStatus = BT_CONNECTION_REFUSED_RESOURCES; /* Reset the channel item contents only if a channel entry was found for it */ @@ -452,15 +452,15 @@ static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* cons ChannelData->PSM = ConnectionRequest.PSM; ChannelData->LocalMTU = MAXIMUM_CHANNEL_MTU; ChannelData->State = BT_Channel_Config_WaitConfig; - + ChannelStatus = BT_CONNECTION_SUCCESSFUL; } else { - ChannelStatus = BT_CONNECTION_REFUSED_PSM; + ChannelStatus = BT_CONNECTION_REFUSED_PSM; } } - + struct { BT_Signal_Header_t SignalCommandHeader; @@ -477,7 +477,7 @@ static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* cons ResponsePacket.ConnectionResponse.SourceChannel = ChannelData->RemoteNumber; ResponsePacket.ConnectionResponse.Result = ChannelStatus; ResponsePacket.ConnectionResponse.Status = 0x00; - + Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); BT_ACL_DEBUG(1, ">> L2CAP Connection Response"); @@ -493,16 +493,16 @@ static inline void Bluetooth_Signal_ConnectionReq(const BT_Signal_Header_t* cons static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* const SignalCommandHeader) { BT_Signal_ConnectionResp_t ConnectionResponse; - + Pipe_Read_Stream_LE(&ConnectionResponse, sizeof(ConnectionResponse)); Pipe_ClearIN(); Pipe_Freeze(); BT_ACL_DEBUG(1, "<< L2CAP Connection Response"); - BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConnectionResponse.Result); - BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel); - BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel); + BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConnectionResponse.Result); + BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConnectionResponse.SourceChannel); + BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", ConnectionResponse.DestinationChannel); /* Search for the referenced channel in the channel information list */ Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConnectionResponse.SourceChannel, CHANNEL_SEARCH_LOCALNUMBER); @@ -524,12 +524,12 @@ static inline void Bluetooth_Signal_ConnectionResp(const BT_Signal_Header_t* con static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* const SignalCommandHeader) { BT_Signal_ConfigurationReq_t ConfigurationRequest; - + /* Allocate a buffer large enough to hold the variable number of configuration options in the request */ uint8_t OptionsLen = (SignalCommandHeader->Length - sizeof(ConfigurationRequest)); uint8_t Options[OptionsLen]; - Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest)); + Pipe_Read_Stream_LE(&ConfigurationRequest, sizeof(ConfigurationRequest)); Pipe_Read_Stream_LE(&Options, sizeof(Options)); Pipe_ClearIN(); @@ -554,7 +554,7 @@ static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* c BT_ACL_DEBUG(2, "-- Option Type: 0x%04X", OptionHeader->Type); BT_ACL_DEBUG(2, "-- Option Length: 0x%04X", (sizeof(BT_Config_Option_Header_t) + OptionHeader->Length)); - + /* Store the remote MTU option's value if present */ if (OptionHeader->Type == BT_CONFIG_OPTION_MTU) ChannelData->RemoteMTU = *((uint16_t*)OptionData); @@ -563,7 +563,7 @@ static inline void Bluetooth_Signal_ConfigurationReq(const BT_Signal_Header_t* c OptionPos += (sizeof(BT_Config_Option_Header_t) + OptionHeader->Length); } } - + struct { BT_Signal_Header_t SignalCommandHeader; @@ -616,14 +616,14 @@ static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* Pipe_ClearIN(); Pipe_Freeze(); - + BT_ACL_DEBUG(1, "<< L2CAP Configuration Response"); BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", ConfigurationResponse.SourceChannel); BT_ACL_DEBUG(2, "-- Result: 0x%02X", ConfigurationResponse.Result); /* Search for the referenced channel in the channel information list */ Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(ConfigurationResponse.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); - + /* Only update the channel's state if it was found in the channel list */ if (ChannelData != NULL) { @@ -639,7 +639,7 @@ static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* ChannelData->State = BT_Channel_Open; Bluetooth_ChannelOpened(ChannelData); break; - } + } } else { @@ -656,16 +656,16 @@ static inline void Bluetooth_Signal_ConfigurationResp(const BT_Signal_Header_t* static inline void Bluetooth_Signal_DisconnectionReq(const BT_Signal_Header_t* const SignalCommandHeader) { BT_Signal_DisconnectionReq_t DisconnectionRequest; - + Pipe_Read_Stream_LE(&DisconnectionRequest, sizeof(DisconnectionRequest)); BT_ACL_DEBUG(1, "<< L2CAP Disconnection Request"); BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionRequest.DestinationChannel); BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionRequest.SourceChannel); - + Pipe_ClearIN(); Pipe_Freeze(); - + /* Search for the referenced channel in the channel information list */ Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionRequest.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); @@ -702,20 +702,20 @@ static inline void Bluetooth_Signal_DisconnectionReq(const BT_Signal_Header_t* c static inline void Bluetooth_Signal_DisconnectionResp(const BT_Signal_Header_t* const SignalCommandHeader) { BT_Signal_DisconnectionResp_t DisconnectionResponse; - + Pipe_Read_Stream_LE(&DisconnectionResponse, sizeof(DisconnectionResponse)); BT_ACL_DEBUG(1, "<< L2CAP Disconnection Response"); BT_ACL_DEBUG(2, "-- Destination Channel: 0x%04X", DisconnectionResponse.DestinationChannel); BT_ACL_DEBUG(2, "-- Source Channel: 0x%04X", DisconnectionResponse.SourceChannel); - + Pipe_ClearIN(); Pipe_Freeze(); - + /* Search for the referenced channel in the channel information list */ Bluetooth_Channel_t* ChannelData = Bluetooth_GetChannelData(DisconnectionResponse.SourceChannel, CHANNEL_SEARCH_REMOTENUMBER); - - /* If the channel was found in the channel list, close it */ + + /* If the channel was found in the channel list, close it */ if (ChannelData != NULL) ChannelData->State = BT_Channel_Closed; } @@ -727,10 +727,10 @@ static inline void Bluetooth_Signal_DisconnectionResp(const BT_Signal_Header_t* static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const SignalCommandHeader) { BT_ACL_DEBUG(1, "<< L2CAP Echo Request"); - + Pipe_ClearIN(); Pipe_Freeze(); - + struct { BT_Signal_Header_t SignalCommandHeader; @@ -740,7 +740,7 @@ static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const Sign ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_ECHO_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; ResponsePacket.SignalCommandHeader.Length = 0; - + Bluetooth_SendPacket(&ResponsePacket, sizeof(ResponsePacket), NULL); BT_ACL_DEBUG(1, ">> L2CAP Echo Response"); @@ -758,7 +758,7 @@ static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* con BT_ACL_DEBUG(1, "<< L2CAP Information Request"); BT_ACL_DEBUG(2, "-- Info Type: 0x%04X", InformationRequest.InfoType); - + Pipe_ClearIN(); Pipe_Freeze(); @@ -766,25 +766,25 @@ static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* con { BT_Signal_Header_t SignalCommandHeader; BT_Signal_InformationResp_t InformationResponse; - + uint8_t Data[4]; } ResponsePacket; - + uint8_t DataLen = 0; - + /* Retrieve the requested information and store it in the outgoing packet, if found */ switch (InformationRequest.InfoType) { - case BT_INFOREQ_MTU: + case BT_INFOREQ_MTU: ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL; DataLen = 2; - + *((uint16_t*)&ResponsePacket.Data) = MAXIMUM_CHANNEL_MTU; break; case BT_INFOREQ_EXTENDEDFEATURES: ResponsePacket.InformationResponse.Result = BT_INFORMATION_SUCCESSFUL; DataLen = 4; - + *((uint32_t*)&ResponsePacket.Data) = 0; break; default: @@ -792,7 +792,7 @@ static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* con DataLen = 0; break; } - + /* Fill out the Signal Command header in the response packet */ ResponsePacket.SignalCommandHeader.Code = BT_SIGNAL_INFORMATION_RESPONSE; ResponsePacket.SignalCommandHeader.Identifier = SignalCommandHeader->Identifier; @@ -800,9 +800,10 @@ static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* con /* Fill out the Information Response in the response packet */ ResponsePacket.InformationResponse.InfoType = InformationRequest.InfoType; - + Bluetooth_SendPacket(&ResponsePacket, (sizeof(ResponsePacket) - sizeof(ResponsePacket.Data) + DataLen), NULL); - BT_ACL_DEBUG(1, ">> L2CAP Information Response"); + BT_ACL_DEBUG(1, ">> L2CAP Information Response"); BT_ACL_DEBUG(2, "-- Result: 0x%02X", ResponsePacket.InformationResponse.Result); } + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h index efe9d39f6..4c587d597 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothACLPackets.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,13 +44,13 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> - + #include "BluetoothStack.h" - + /* Macros: */ #define BT_ACL_DEBUG(l, s, ...) do { if (ACL_DEBUG_LEVEL >= l) printf_P(PSTR("(ACL) " s "\r\n"), ##__VA_ARGS__); } while (0) #define ACL_DEBUG_LEVEL 0 - + /** Lowest possible channel number for L2CAP data channels. */ #define BT_CHANNELNUMBER_BASEOFFSET 0x0040 @@ -59,7 +59,7 @@ /** Bluetooth specification defined channel number for connectionless data. */ #define BT_CHANNEL_CONNECTIONLESS 0x0002 - + #define BT_ACL_FIRST_AUTOFLUSH (1 << 13) #define BT_SIGNAL_COMMAND_REJECT 0x01 @@ -73,23 +73,23 @@ #define BT_SIGNAL_ECHO_RESPONSE 0x09 #define BT_SIGNAL_INFORMATION_REQUEST 0x0A #define BT_SIGNAL_INFORMATION_RESPONSE 0x0B - + #define BT_INFOREQ_MTU 0x0001 #define BT_INFOREQ_EXTENDEDFEATURES 0x0002 - + #define BT_INFORMATION_SUCCESSFUL 0x0000 #define BT_INFORMATION_NOTSUPPORTED 0x0001 - + #define BT_CONNECTION_SUCCESSFUL 0x0000 #define BT_CONNECTION_REFUSED_PSM 0x0002 #define BT_CONNECTION_REFUSED_RESOURCES 0x0004 - + #define BT_CONFIGURATION_SUCCESSFUL 0x0000 #define BT_CONFIGURATION_REJECTED 0x0002 #define BT_CONFIGURATION_UNKNOWNOPTIONS 0x0003 - + #define BT_CONFIG_OPTION_MTU 1 - + /* Type Defines: */ /** Bluetooth ACL header structure, common to all ACL data packets. */ typedef struct @@ -104,7 +104,7 @@ uint16_t PayloadLength; /**< Size of the data payload, in bytes */ uint16_t DestinationChannel; /**< Destination channel in the device the data is directed to */ } BT_DataPacket_Header_t; - + /** Bluetooth signaling command header structure, for all ACL packets containing a signaling command. */ typedef struct { @@ -112,7 +112,7 @@ uint8_t Identifier; /**< Unique signal command identifier to link requests and responses */ uint16_t Length; /**< Length of the signaling command data, in bytes */ } BT_Signal_Header_t; - + /** Connection Request signaling command structure, for channel connection requests. */ typedef struct { @@ -135,13 +135,13 @@ uint16_t DestinationChannel; /**< Destination channel address which is to be disconnected */ uint16_t SourceChannel; /**< Source channel address which is to be disconnected */ } BT_Signal_DisconnectionReq_t; - + /** Disconnection response signaling command structure, for responses to channel disconnection requests. */ typedef struct { uint16_t DestinationChannel; /**< Destination channel address which was disconnected */ uint16_t SourceChannel; /**< Source channel address which was disconnected */ - } BT_Signal_DisconnectionResp_t; + } BT_Signal_DisconnectionResp_t; /** Configuration Request signaling command structure, for channel configuration requests. */ typedef struct @@ -163,14 +163,14 @@ { uint16_t InfoType; /**< Data type that is being requested, a BT_INFOREQ_* mask value */ } BT_Signal_InformationReq_t; - + /** Information Response signaling command structure, for responses to information requests. */ typedef struct { uint16_t InfoType; /**< Data type that was requested, a BT_INFOREQ_* mask value */ uint16_t Result; /**< Result of the request, a BT_INFORMATION_* mask value */ } BT_Signal_InformationResp_t; - + /** Configuration Option header structure, placed at the start of each option in a Channel Configuration * request's options list. */ @@ -182,7 +182,7 @@ /* Function Prototypes: */ void Bluetooth_ACLTask(void); - + #if defined(INCLUDE_FROM_BLUETOOTH_ACLPACKETS_C) static void Bluetooth_ProcessIncomingACLPackets(void); @@ -195,5 +195,6 @@ static inline void Bluetooth_Signal_EchoReq(const BT_Signal_Header_t* const SignalCommandHeader); static inline void Bluetooth_Signal_InformationReq(const BT_Signal_Header_t* const SignalCommandHeader); #endif - + #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h index c4690f4a8..f0699373d 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothClassCodes.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ #define DEVICE_CLASS_SERVICE_AUDIO (1UL << 21) #define DEVICE_CLASS_SERVICE_TELEPHONY (1UL << 22) #define DEVICE_CLASS_SERVICE_INFORMATION (1UL << 23) - + #define DEVICE_CLASS_MAJOR_MISC (0x00 << 8) #define DEVICE_CLASS_MAJOR_COMPUTER (0x01 << 8) #define DEVICE_CLASS_MAJOR_PHONE (0x02 << 8) @@ -63,7 +63,7 @@ #define DEVICE_CLASS_MINOR_COMPUTER_HANDHELD (0x04 << 2) #define DEVICE_CLASS_MINOR_COMPUTER_PALM (0x05 << 2) #define DEVICE_CLASS_MINOR_COMPUTER_WEARABLE (0x06 << 2) - + #define DEVICE_CLASS_MINOR_PHONE_UNCATEGORIZED (0x00 << 2) #define DEVICE_CLASS_MINOR_PHONE_CELLULAR (0x01 << 2) #define DEVICE_CLASS_MINOR_PHONE_CORDLESS (0x02 << 2) @@ -79,7 +79,7 @@ #define DEVICE_CLASS_MINOR_LAN_67_TO_83_PC_UTILIZED (0x05 << 5) #define DEVICE_CLASS_MINOR_LAN_83_TO_99_PC_UTILIZED (0x06 << 5) #define DEVICE_CLASS_MINOR_LAN_NO_SERVICE_AVAILABLE (0x07 << 5) - + #define DEVICE_CLASS_MINOR_AV_UNCATEGORIZED (0x00 << 2) #define DEVICE_CLASS_MINOR_AV_HEADSET (0x01 << 2) #define DEVICE_CLASS_MINOR_AV_HANDSFREE (0x02 << 2) @@ -97,7 +97,7 @@ #define DEVICE_CLASS_MINOR_AV_DISPLAY_AND_LOUDSPEAKER (0x0F << 2) #define DEVICE_CLASS_MINOR_AV_VIDEO_CONFERENCING (0x10 << 2) #define DEVICE_CLASS_MINOR_AV_GAMING_TOY (0x12 << 2) - + #define DEVICE_CLASS_MINOR_PERIPHERAL_KEYBOARD (0x01 << 6) #define DEVICE_CLASS_MINOR_PERIPHERAL_POINTING (0x02 << 6) #define DEVICE_CLASS_MINOR_PERIPHERAL_COMBO (0x03 << 6) @@ -115,3 +115,4 @@ #define DEVICE_CLASS_MINOR_IMAGING_PRINTER (1 << 7) #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c index 7f6f8b78d..0cf18f21c 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -59,28 +59,28 @@ void Bluetooth_HCITask(void) case Bluetooth_ProcessEvents: Pipe_SelectPipe(BLUETOOTH_EVENTS_PIPE); Pipe_Unfreeze(); - + if (Pipe_IsReadWriteAllowed()) { BT_HCIEvent_Header_t HCIEventHeader; /* Read in the event header to fetch the event code and payload length */ Pipe_Read_Stream_LE(&HCIEventHeader, sizeof(HCIEventHeader)); - + /* Create a temporary buffer for the event parameters */ uint8_t EventParams[HCIEventHeader.ParameterLength]; /* Read in the event parameters into the temporary buffer */ Pipe_Read_Stream_LE(&EventParams, HCIEventHeader.ParameterLength); Pipe_ClearIN(); - + BT_HCI_DEBUG(1, "Event Received (0x%02X)", HCIEventHeader.EventCode); switch (HCIEventHeader.EventCode) { case EVENT_COMMAND_COMPLETE: BT_HCI_DEBUG(1, "<< Command Complete"); - + /* Check which operation was completed in case we need to process the even parameters */ switch (((BT_HCIEvent_CommandComplete_t*)&EventParams)->Opcode) { @@ -91,7 +91,7 @@ void Bluetooth_HCITask(void) sizeof(Bluetooth_State.LocalBDADDR)); break; } - + Bluetooth_State.CurrentHCIState = Bluetooth_State.NextHCIState; break; case EVENT_COMMAND_STATUS: @@ -110,7 +110,7 @@ void Bluetooth_HCITask(void) memcpy(Bluetooth_TempDeviceAddress, &((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->RemoteAddress, sizeof(Bluetooth_TempDeviceAddress)); - + bool IsACLConnection = (((BT_HCIEvent_ConnectionRequest_t*)&EventParams)->LinkType == 0x01); /* Only accept the connection if it is a ACL (data) connection, a device is not already connected @@ -135,12 +135,12 @@ void Bluetooth_HCITask(void) break; case EVENT_LINK_KEY_REQUEST: BT_HCI_DEBUG(1, "<< Link Key Request"); - + /* Need to store the remote device's BT address in a temporary buffer for later use */ memcpy(Bluetooth_TempDeviceAddress, &((BT_HCIEvent_LinkKeyReq_t*)&EventParams)->RemoteAddress, - sizeof(Bluetooth_TempDeviceAddress)); - + sizeof(Bluetooth_TempDeviceAddress)); + Bluetooth_State.CurrentHCIState = Bluetooth_Conn_SendLinkKeyNAK; break; case EVENT_CONNECTION_COMPLETE: @@ -155,22 +155,22 @@ void Bluetooth_HCITask(void) /* Store the created connection handle and indicate that the connection has been established */ Bluetooth_Connection.ConnectionHandle = ((BT_HCIEvent_ConnectionComplete_t*)&EventParams)->ConnectionHandle; Bluetooth_Connection.IsConnected = true; - - Bluetooth_ConnectionComplete(); + + Bluetooth_ConnectionComplete(); break; case EVENT_DISCONNECTION_COMPLETE: BT_HCI_DEBUG(1, "<< Disconnection Complete"); /* Device disconnected, indicate connection information no longer valid */ Bluetooth_Connection.IsConnected = false; - + Bluetooth_DisconnectionComplete(); break; } } - + Pipe_Freeze(); - + break; case Bluetooth_Init: BT_HCI_DEBUG(1, "# Init"); @@ -180,7 +180,7 @@ void Bluetooth_HCITask(void) /* Reset the connection information structure to destroy any previous connection state */ memset(&Bluetooth_Connection, 0x00, sizeof(Bluetooth_Connection)); - Bluetooth_State.CurrentHCIState = Bluetooth_Init_Reset; + Bluetooth_State.CurrentHCIState = Bluetooth_Init_Reset; break; case Bluetooth_Init_Reset: BT_HCI_DEBUG(1, "# Reset"); @@ -193,13 +193,13 @@ void Bluetooth_HCITask(void) /* Send the command to reset the Bluetooth dongle controller */ Bluetooth_SendHCICommand(&HCICommandHeader, NULL, 0); - + Bluetooth_State.NextHCIState = Bluetooth_Init_ReadBufferSize; Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; break; case Bluetooth_Init_ReadBufferSize: BT_HCI_DEBUG(1, "# Read Buffer Size"); - + HCICommandHeader = (BT_HCICommand_Header_t) { OpCode: (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBUFFERSIZE), @@ -214,7 +214,7 @@ void Bluetooth_HCITask(void) break; case Bluetooth_Init_GetBDADDR: BT_HCI_DEBUG(1, "# Get BDADDR"); - + HCICommandHeader = (BT_HCICommand_Header_t) { OpCode: (OGF_CTRLR_INFORMATIONAL | OCF_CTRLR_INFORMATIONAL_READBDADDR), @@ -267,10 +267,10 @@ void Bluetooth_HCITask(void) }; uint8_t Interval = BT_SCANMODE_InquiryAndPageScans; - + /* Send the command to set the remote device scanning mode */ Bluetooth_SendHCICommand(&HCICommandHeader, &Interval, 1); - + Bluetooth_State.NextHCIState = Bluetooth_Init_FinalizeInit; Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; break; @@ -301,7 +301,7 @@ void Bluetooth_HCITask(void) /* Send the command to accept the remote connection request */ Bluetooth_SendHCICommand(&HCICommandHeader, &AcceptConnectionParams, sizeof(BT_HCICommand_AcceptConnectionReq_t)); - + Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; break; case Bluetooth_Conn_RejectConnection: @@ -321,7 +321,7 @@ void Bluetooth_HCITask(void) /* Send the command to reject the remote connection request */ Bluetooth_SendHCICommand(&HCICommandHeader, &RejectConnectionParams, sizeof(BT_HCICommand_RejectConnectionReq_t)); - + Bluetooth_State.CurrentHCIState = Bluetooth_ProcessEvents; break; case Bluetooth_Conn_SendPINCode: @@ -339,7 +339,7 @@ void Bluetooth_HCITask(void) memcpy(PINCodeRequestParams.RemoteAddress, Bluetooth_TempDeviceAddress, sizeof(PINCodeRequestParams.RemoteAddress)); PINCodeRequestParams.PINCodeLength = strlen(Bluetooth_DeviceConfiguration.PINCode); memcpy(PINCodeRequestParams.PINCode, Bluetooth_DeviceConfiguration.PINCode, sizeof(PINCodeRequestParams.PINCode)); - + /* Send the command to transmit the device's local PIN number for authentication */ Bluetooth_SendHCICommand(&HCICommandHeader, &PINCodeRequestParams, sizeof(BT_HCICommand_PinCodeResp_t)); @@ -392,14 +392,15 @@ static uint8_t Bluetooth_SendHCICommand(const BT_HCICommand_Header_t* const HCIC /* Copy over the HCI command header to the allocated buffer */ memcpy(CommandBuffer, HCICommandHeader, sizeof(BT_HCICommand_Header_t)); - + /* Zero out the parameter section of the response so that all padding bytes are known to be zero */ memset(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], 0x00, HCICommandHeader->ParameterLength); /* Copy over the command parameters (if any) to the command buffer - note, the number of actual source parameter bytes may differ to those in the header; any difference in length is filled with 0x00 padding bytes */ memcpy(&CommandBuffer[sizeof(BT_HCICommand_Header_t)], Parameters, ParameterLength); - + Pipe_SelectPipe(PIPE_CONTROLPIPE); return USB_Host_SendControlRequest(CommandBuffer); } + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h index 9476446f6..90074e841 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothHCICommands.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -82,7 +82,7 @@ #define OCF_CTRLR_BASEBAND_WRITE_AUTHENTICATION_ENABLE 0x0020 #define OCF_CTRLR_INFORMATIONAL_READBUFFERSIZE 0x0005 #define OCF_CTRLR_INFORMATIONAL_READBDADDR 0x0009 - + #define EVENT_COMMAND_STATUS 0x0F #define EVENT_COMMAND_COMPLETE 0x0E #define EVENT_CONNECTION_COMPLETE 0x03 @@ -91,10 +91,10 @@ #define EVENT_REMOTE_NAME_REQUEST_COMPLETE 0x07 #define EVENT_PIN_CODE_REQUEST 0x16 #define EVENT_LINK_KEY_REQUEST 0x17 - + #define ERROR_LIMITED_RESOURCES 0x0D #define ERROR_UNACCEPTABLE_BDADDR 0x0F - + /* Type Defines: */ typedef struct { @@ -115,7 +115,7 @@ uint8_t Packets; uint16_t OpCode; } BT_HCIEvent_CommandStatus_t; - + typedef struct { uint8_t HCIPacketsAllowable; @@ -139,7 +139,7 @@ uint8_t LinkType; uint8_t EncryptionEnabled; } BT_HCIEvent_ConnectionComplete_t; - + typedef struct { uint8_t RemoteAddress[6]; @@ -149,7 +149,7 @@ { uint8_t RemoteAddress[6]; } BT_HCIEvent_LinkKeyReq_t; - + typedef struct { uint8_t RemoteAddress[6]; @@ -161,18 +161,18 @@ uint8_t PINCodeLength; char PINCode[16]; } BT_HCICommand_PinCodeResp_t; - + typedef struct { uint8_t RemoteAddress[6]; uint8_t SlaveRole; } BT_HCICommand_AcceptConnectionReq_t; - + typedef struct { uint8_t RemoteAddress[6]; uint8_t Reason; - } BT_HCICommand_RejectConnectionReq_t; + } BT_HCICommand_RejectConnectionReq_t; /* Enums: */ enum BT_ScanEnable_Modes_t @@ -199,14 +199,15 @@ Bluetooth_Conn_SendPINCode = 11, Bluetooth_Conn_SendLinkKeyNAK = 12, }; - + /* Function Prototypes: */ void Bluetooth_HCITask(void); - + #if defined(INCLUDE_FROM_BLUETOOTHHCICOMMANDS_C) static uint8_t Bluetooth_SendHCICommand(const BT_HCICommand_Header_t* const HCICommandHeader, const void* Parameters, const uint16_t ParameterLength); #endif - + #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c index 1fa8079f3..d85b1f983 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -71,3 +71,4 @@ void Bluetooth_Stack_USBTask(void) Bluetooth_HCITask(); Bluetooth_ACLTask(); } + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h index e434e6c4f..9483198c7 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/BluetoothStack.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,12 +38,12 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "../ConfigDescriptor.h" - + /* Macros: */ #define BLUETOOTH_MAX_OPEN_CHANNELS 6 - + #define CHANNEL_PSM_SDP 0x0001 #define CHANNEL_PSM_UDP 0x0002 #define CHANNEL_PSM_RFCOMM 0x0003 @@ -53,13 +53,13 @@ #define CHANNEL_PSM_HTTP 0x000C #define CHANNEL_PSM_UPNP 0x0010 #define CHANNEL_PSM_HIDP 0x0011 - + #define CHANNEL_SEARCH_LOCALNUMBER 0 #define CHANNEL_SEARCH_REMOTENUMBER 1 #define CHANNEL_SEARCH_PSM 2 - + #define MAXIMUM_CHANNEL_MTU 255 - + /* Enums: */ /** Enum for the possible states for a Bluetooth ACL channel. */ enum BT_ChannelStates_t @@ -117,7 +117,7 @@ Bluetooth_Channel_t Channels[BLUETOOTH_MAX_OPEN_CHANNELS]; /**< Channel information structures for the connection. */ uint8_t SignalingIdentifier; /**< Next Signaling Channel unique command sequence identifier. */ } Bluetooth_Connection_t; - + /** Local Bluetooth device information structure, for the defining of local device characteristics for the Bluetooth stack. */ typedef struct { @@ -125,7 +125,7 @@ char PINCode[16]; /**< Pin code required to send or receive in order to authenticate with a remote device. */ char Name[]; /**< Name of the local Bluetooth device, up to 248 characters. */ } Bluetooth_Device_t; - + /** Bluetooth stack state information structure, for the containment of the Bluetooth stack state. The values in * this structure are set by the Bluetooth stack internally, and should all be treated as read only by the user * application. @@ -139,12 +139,12 @@ */ uint8_t LocalBDADDR[6]; /**< Local Bluetooth adapter's BDADDR, valid when the stack is fully initialized. */ } Bluetooth_Stack_State_t; - + /* Includes: */ #include "BluetoothHCICommands.h" - #include "BluetoothACLPackets.h" - - /* Function Prototypes: */ + #include "BluetoothACLPackets.h" + + /* Function Prototypes: */ void Bluetooth_Stack_Init(void); void Bluetooth_Stack_USBTask(void); @@ -171,3 +171,4 @@ extern Bluetooth_Stack_State_t Bluetooth_State; #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c index 2638dee35..636b5a454 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -124,7 +124,7 @@ void RFCOMM_ProcessPacket(void* Data, const RFCOMM_Header_t* FrameHeader = (const RFCOMM_Header_t*)Data; const uint8_t* FrameData = (const uint8_t*)Data + sizeof(RFCOMM_Header_t); uint16_t FrameDataLen = RFCOMM_GetVariableFieldValue(&FrameData); - + /* Decode the RFCOMM frame type from the header */ switch (FrameHeader->Control & ~FRAME_POLL_FINAL) { @@ -167,7 +167,7 @@ void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel, uint8_t Length; RFCOMM_MSC_Parameters_t Params; } MSCommand; - + MSCommand.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_ModemStatus, .EA = true, .CR = true}; MSCommand.Length = (sizeof(MSCommand.Params) << 1) | 0x01; MSCommand.Params.Channel = (RFCOMM_Address_t){.DLCI = RFCOMMChannel->DLCI, .EA = true, .CR = true}; @@ -175,7 +175,7 @@ void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel, MSCommand.Params.BreakSignal = RFCOMMChannel->Local.BreakSignal; /* Send the MSC command to the remote device */ - RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel); + RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, true, RFCOMM_Frame_UIH, sizeof(MSCommand), &MSCommand, ACLChannel); } /** Sends new data through an open logical RFCOMM channel. This should be used to transmit data through a @@ -193,12 +193,12 @@ void RFCOMM_SendData(const uint16_t DataLen, { if (RFCOMMChannel->State != RFCOMM_Channel_Open) return; - + BT_RFCOMM_DEBUG(1, ">> UIH Frame"); BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", RFCOMMChannel->DLCI); /* Send the MSC command to the remote device */ - RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel); + RFCOMM_SendFrame(RFCOMMChannel->DLCI, false, RFCOMM_Frame_UIH, DataLen, Data, ACLChannel); } RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI) @@ -220,11 +220,11 @@ RFCOMM_Channel_t* RFCOMM_GetFreeChannelEntry(const uint8_t DLCI) RFCOMMChannel->Local.Signals = RFCOMM_SIGNAL_RTC | RFCOMM_SIGNAL_RTR | RFCOMM_SIGNAL_DV | (1 << 0); RFCOMMChannel->Local.BreakSignal = 0 | (1 << 0); RFCOMMChannel->ConfigFlags = 0; - + return RFCOMMChannel; } } - + return NULL; } @@ -234,7 +234,7 @@ RFCOMM_Channel_t* RFCOMM_GetChannelData(const uint8_t DLCI) for (uint8_t i = 0; i < RFCOMM_MAX_OPEN_CHANNELS; i++) { RFCOMM_Channel_t* CurrRFCOMMChannel = &RFCOMM_Channels[i]; - + /* If the current non-closed channel's DLCI matches the search DLCI, return it to the caller */ if ((CurrRFCOMMChannel->State != RFCOMM_Channel_Closed) && (CurrRFCOMMChannel->DLCI == DLCI)) return CurrRFCOMMChannel; @@ -248,10 +248,10 @@ uint16_t RFCOMM_GetVariableFieldValue(const uint8_t** BufferPos) { uint8_t FirstOctet; uint8_t SecondOctet = 0; - + FirstOctet = **BufferPos; (*BufferPos)++; - + /* If the field size is more than a single byte, fetch the next byte in the variable length field */ if (!(FirstOctet & 0x01)) { @@ -281,30 +281,30 @@ void RFCOMM_SendFrame(const uint8_t DLCI, uint8_t Data[DataLen]; uint8_t FCS; } ResponsePacket; - + /* Set the frame header values to the specified address and frame type */ ResponsePacket.FrameHeader.Control = Control; ResponsePacket.FrameHeader.Address = (RFCOMM_Address_t){.DLCI = DLCI, .EA = true, .CR = CommandResponse}; - + /* Set the lower 7 bits of the packet length */ ResponsePacket.Size[0] = (DataLen << 1); - + /* Terminate the size field if size is 7 bits or lower, otherwise set the upper 8 bits of the length */ if (DataLen < 128) ResponsePacket.Size[0] |= 0x01; else ResponsePacket.Size[1] = (DataLen >> 7); - + /* Copy over the packet data from the source buffer to the response packet buffer */ memcpy(ResponsePacket.Data, Data, DataLen); - + /* Determine the length of the frame which is to be used to calculate the CRC value */ uint8_t CRCLength = sizeof(ResponsePacket.FrameHeader); /* UIH frames do not have the CRC calculated on the Size field in the response, all other frames do */ if ((Control & ~FRAME_POLL_FINAL) != RFCOMM_Frame_UIH) CRCLength += sizeof(ResponsePacket.Size); - + /* Calculate the frame checksum from the appropriate fields */ ResponsePacket.FCS = RFCOMM_GetFCSValue(&ResponsePacket, CRCLength); @@ -316,7 +316,7 @@ static uint8_t RFCOMM_GetFCSValue(const void* FrameStart, uint8_t Length) { uint8_t FCS = 0xFF; - + /* Calculate new Frame CRC value via the given data bytes and the CRC table */ for (uint8_t i = 0; i < Length; i++) FCS = pgm_read_byte(&CRC8_Table[FCS ^ ((const uint8_t*)FrameStart)[i]]); @@ -338,7 +338,7 @@ static void RFCOMM_ProcessDISC(const RFCOMM_Address_t* const FrameAddress, BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI); - + /* If the requested channel is currently open, destroy it */ if (RFCOMMChannel != NULL) RFCOMMChannel->State = RFCOMM_Channel_Closed; @@ -356,7 +356,7 @@ static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress, if (FrameAddress->DLCI == RFCOMM_CONTROL_DLCI) { BT_RFCOMM_DEBUG(1, ">> UA Sent"); - + /* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */ RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel); @@ -365,7 +365,7 @@ static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress, /* Find the existing channel's entry in the channel table */ RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI); - + /* Existing entry not found, create a new entry for the channel */ if (RFCOMMChannel == NULL) RFCOMMChannel = RFCOMM_GetFreeChannelEntry(FrameAddress->DLCI); @@ -374,7 +374,7 @@ static void RFCOMM_ProcessSABM(const RFCOMM_Address_t* const FrameAddress, if (RFCOMMChannel != NULL) { BT_RFCOMM_DEBUG(1, ">> UA Sent"); - + /* Free channel found, or request was to the control channel - accept SABM by sending a UA frame */ RFCOMM_SendFrame(FrameAddress->DLCI, true, (RFCOMM_Frame_UA | FRAME_POLL_FINAL), 0, NULL, ACLChannel); } @@ -395,7 +395,7 @@ static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress, } static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress, - const uint16_t FrameLength, + const uint16_t FrameLength, const uint8_t* FrameData, Bluetooth_Channel_t* const ACLChannel) { @@ -408,9 +408,10 @@ static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress, BT_RFCOMM_DEBUG(1, "<< UIH Received"); BT_RFCOMM_DEBUG(2, "-- DLCI 0x%02X", FrameAddress->DLCI); BT_RFCOMM_DEBUG(2, "-- Length 0x%02X", FrameLength); - + RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(FrameAddress->DLCI); - + if (RFCOMMChannel != NULL) RFCOMM_DataReceived(RFCOMMChannel, FrameLength, FrameData); } + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h index 7b74f4fab..be862a2b3 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMM.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -48,13 +48,13 @@ #include "BluetoothStack.h" #include "RFCOMMControl.h" - + /* Macros: */ #define BT_RFCOMM_DEBUG(l, s, ...) do { if (RFCOMM_DEBUG_LEVEL >= l) printf_P(PSTR("(RFCOMM) " s "\r\n"), ##__VA_ARGS__); } while (0) #define RFCOMM_DEBUG_LEVEL 0 - + #define FRAME_POLL_FINAL (1 << 4) - + #define RFCOMM_CONTROL_DLCI 0 #define RFCOMM_MAX_OPEN_CHANNELS 5 @@ -68,14 +68,14 @@ RFCOMM_Frame_UA = 0x63, /**< Unnumbered Acknowledgement Field */ RFCOMM_Frame_UIH = 0xEF, /**< Unnumbered Information with Header check Field */ }; - + enum RFCOMM_Channel_States_t { RFCOMM_Channel_Closed = 0, RFCOMM_Channel_Configure = 1, RFCOMM_Channel_Open = 2, }; - + /* Type Defines: */ typedef struct { @@ -95,7 +95,7 @@ uint8_t BreakSignal; } Local; } RFCOMM_Channel_t; - + /* External Variables: */ extern RFCOMM_Channel_t RFCOMM_Channels[RFCOMM_MAX_OPEN_CHANNELS]; @@ -104,7 +104,7 @@ void RFCOMM_ServiceChannels(Bluetooth_Channel_t* const ACLChannel); void RFCOMM_ProcessPacket(void* Data, Bluetooth_Channel_t* const ACLChannel); - + void RFCOMM_SendChannelSignals(const RFCOMM_Channel_t* const RFCOMMChannel, Bluetooth_Channel_t* const ACLChannel); void RFCOMM_SendData(const uint16_t DataLen, @@ -141,9 +141,10 @@ static void RFCOMM_ProcessUA(const RFCOMM_Address_t* const FrameAddress, Bluetooth_Channel_t* const ACLChannel); static void RFCOMM_ProcessUIH(const RFCOMM_Address_t* const FrameAddress, - const uint16_t FrameLength, + const uint16_t FrameLength, const uint8_t* FrameData, Bluetooth_Channel_t* const ACLChannel); #endif - + #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c index 5bd884572..871d3627f 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -69,7 +69,7 @@ void RFCOMM_ProcessControlCommand(const uint8_t* Command, RFCOMM_ProcessDPNCommand(CommandHeader, CommandData, ACLChannel); break; default: - BT_RFCOMM_DEBUG(1, "<< Unknown Command"); + BT_RFCOMM_DEBUG(1, "<< Unknown Command"); break; } } @@ -82,7 +82,7 @@ static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeade const uint8_t* Params = (const uint8_t*)CommandData; BT_RFCOMM_DEBUG(1, "<< TEST Command"); - + struct { RFCOMM_Command_t CommandHeader; @@ -94,7 +94,7 @@ static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeade TestResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_Test, .EA = true, .CR = false}; TestResponse.Length = (CommandDataLen << 1) | 0x01; memcpy(TestResponse.TestData, Params, CommandDataLen); - + BT_RFCOMM_DEBUG(1, ">> TEST Response"); /* Send the PDN response to acknowledge the command */ @@ -124,14 +124,14 @@ static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader BT_RFCOMM_DEBUG(1, "<< MSC %s", (CommandHeader->CR) ? "Command" : "Response"); BT_RFCOMM_DEBUG(2, "-- DLCI: 0x%02X", Params->Channel.DLCI); - + /* Ignore status flags sent to the control channel */ if (Params->Channel.DLCI == RFCOMM_CONTROL_DLCI) return; - + /* Retrieve existing channel configuration data, if already opened */ - RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->Channel.DLCI); - + RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->Channel.DLCI); + /* If the channel does not exist, abort */ if (RFCOMMChannel == NULL) return; @@ -140,16 +140,16 @@ static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader if (CommandHeader->CR) { /* Save the new channel signals to the channel state structure */ - RFCOMMChannel->Remote.Signals = Params->Signals; + RFCOMMChannel->Remote.Signals = Params->Signals; RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_REMOTESIGNALS; - + /* If the command contains the optional break signals field, store the value */ if (CommandDataLen == sizeof(RFCOMM_MSC_Parameters_t)) RFCOMMChannel->Remote.BreakSignal = Params->BreakSignal; /* Notify the user application that the signals have been received */ RFCOMM_ChannelSignalsReceived(RFCOMMChannel); - + struct { RFCOMM_Command_t CommandHeader; @@ -172,7 +172,7 @@ static void RFCOMM_ProcessMSCCommand(const RFCOMM_Command_t* const CommandHeader { /* Indicate that the remote device has acknowledged the sent signals */ RFCOMMChannel->ConfigFlags |= RFCOMM_CONFIG_LOCALSIGNALS; - } + } } static void RFCOMM_ProcessRPNCommand(const RFCOMM_Command_t* const CommandHeader, @@ -197,20 +197,20 @@ static void RFCOMM_ProcessDPNCommand(const RFCOMM_Command_t* const CommandHeader BT_RFCOMM_DEBUG(1, "<< DPN Command"); BT_RFCOMM_DEBUG(2, "-- DLCI: 0x%02X", Params->DLCI); - + /* Ignore parameter negotiations to the control channel */ if (Params->DLCI == RFCOMM_CONTROL_DLCI) return; - + /* Retrieve existing channel configuration data, if already opened */ RFCOMM_Channel_t* RFCOMMChannel = RFCOMM_GetChannelData(Params->DLCI); - + /* Check if the channel has no corresponding entry - remote did not open it first */ if (RFCOMMChannel == NULL) { /* Create a new entry in the channel table for the new channel */ RFCOMMChannel = RFCOMM_GetFreeChannelEntry(Params->DLCI); - + /* No free entry was found, discard the request */ if (RFCOMMChannel == NULL) { @@ -218,27 +218,28 @@ static void RFCOMM_ProcessDPNCommand(const RFCOMM_Command_t* const CommandHeader return; } } - + /* Save the new channel configuration */ RFCOMMChannel->State = RFCOMM_Channel_Configure; RFCOMMChannel->Priority = Params->Priority; RFCOMMChannel->MTU = Params->MaximumFrameSize; - + struct { RFCOMM_Command_t CommandHeader; uint8_t Length; RFCOMM_DPN_Parameters_t Params; } DPNResponse; - + /* Fill out the DPN response data */ DPNResponse.CommandHeader = (RFCOMM_Command_t){.Command = RFCOMM_Control_DLCParameterNegotiation, .EA = true, .CR = false}; DPNResponse.Length = (sizeof(DPNResponse.Params) << 1) | 0x01; memcpy(&DPNResponse.Params, Params, sizeof(RFCOMM_DPN_Parameters_t)); DPNResponse.Params.ConvergenceLayer = 0x00; // TODO: Enable credit based transaction support - + BT_RFCOMM_DEBUG(1, ">> DPN Response"); /* Send the DPN response to acknowledge the command */ RFCOMM_SendFrame(RFCOMM_CONTROL_DLCI, false, RFCOMM_Frame_UIH, sizeof(DPNResponse), &DPNResponse, ACLChannel); } + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h index b527bfa7c..b65e0d5a0 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/RFCOMMControl.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -48,14 +48,14 @@ #include "BluetoothStack.h" #include "RFCOMM.h" - + /* Macros: */ #define RFCOMM_SIGNAL_FC (1 << 1) #define RFCOMM_SIGNAL_RTC (1 << 2) #define RFCOMM_SIGNAL_RTR (1 << 3) #define RFCOMM_SIGNAL_IC (1 << 6) #define RFCOMM_SIGNAL_DV (1 << 7) - + #define RFCOMM_CONFIG_REMOTESIGNALS (1 << 0) #define RFCOMM_CONFIG_LOCALSIGNALS (1 << 1) #define RFCOMM_CONFIG_LOCALSIGNALSSENT (1 << 2) @@ -73,7 +73,7 @@ RFCOMM_Control_DLCParameterNegotiation = (0x80 >> 2), RFCOMM_Control_NonSupportedCommand = (0x10 >> 2), }; - + /* Type Defines: */ typedef struct { @@ -94,7 +94,7 @@ unsigned char CR : 1; unsigned char Command : 6; } RFCOMM_Command_t; - + typedef struct { uint8_t DLCI; @@ -104,9 +104,9 @@ uint8_t ACKTimerTicks; uint16_t MaximumFrameSize; uint8_t MaxRetransmissions; - uint8_t RecoveryWindowSize; + uint8_t RecoveryWindowSize; } RFCOMM_DPN_Parameters_t; - + typedef struct { RFCOMM_Address_t Channel; @@ -120,7 +120,7 @@ #if defined(INCLUDE_FROM_RFCOMM_CONTROL_C) static void RFCOMM_ProcessTestCommand(const RFCOMM_Command_t* const CommandHeader, - const uint8_t CommandDataLen, + const uint8_t CommandDataLen, const uint8_t* CommandData, Bluetooth_Channel_t* const ACLChannel); static void RFCOMM_ProcessFCECommand(const RFCOMM_Command_t* const CommandHeader, @@ -143,5 +143,6 @@ const uint8_t* CommandData, Bluetooth_Channel_t* const ACLChannel); #endif - + #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c index 19d42e264..3c1acfe28 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -73,7 +73,7 @@ void SDP_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel) { case SDP_PDU_SERVICESEARCHREQUEST: SDP_ProcessServiceSearch(SDPHeader, Channel); - break; + break; case SDP_PDU_SERVICEATTRIBUTEREQUEST: SDP_ProcessServiceAttribute(SDPHeader, Channel); break; @@ -99,11 +99,11 @@ static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader, uint8_t UUIDList[12][UUID_SIZE_BYTES]; uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter); BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs); - + /* Retrieve the maximum service record response count from the request */ uint16_t MaxServiceRecordCount = SDP_ReadData16(&CurrentParameter); BT_SDP_DEBUG(2, "-- Max Return Service Count: 0x%04X", MaxServiceRecordCount); - + struct { SDP_PDUHeader_t SDPHeader; @@ -111,7 +111,7 @@ static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader, uint16_t CurrentServiceRecordCount; uint8_t ResponseData[100]; } ResponsePacket; - + uint8_t AddedServiceHandles = 0; /* Create a pointer to the buffer to indicate the current location for response data to be added */ @@ -136,7 +136,7 @@ static void SDP_ProcessServiceSearch(const SDP_PDUHeader_t* const SDPHeader, uint8_t AttrSize = SDP_GetLocalAttributeContainerSize(AttributeValue, &AttrHeaderSize); memcpy_P(CurrResponsePos, AttributeValue + AttrHeaderSize, AttrSize); CurrResponsePos += AttrHeaderSize + AttrSize; - + AddedServiceHandles++; } @@ -180,11 +180,11 @@ static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader, /* Retrieve the service handle whose attributes are to be examined */ uint32_t ServiceHandle = SDP_ReadData32(&CurrentParameter); BT_SDP_DEBUG(2, "-- Service Handle: 0x%08lX", ServiceHandle); - + /* Retrieve the maximum Attribute response size from the request */ uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter); BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize); - + /* Retrieve the list of Attributes from the request */ uint16_t AttributeList[8][2]; uint8_t TotalAttributes = SDP_GetAttributeList(AttributeList, &CurrentParameter); @@ -211,24 +211,24 @@ static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader, { /* Read in a pointer to the current UUID table entry's Attribute table */ ServiceAttributeTable_t* CurrAttributeTable = pgm_read_ptr(&SDP_Services_Table[CurrTableItem]); - + /* Retrieve a PROGMEM pointer to the value of the Service Record Handle */ const void* ServiceRecord = SDP_GetAttributeValue(CurrAttributeTable, SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE); - + /* Get the size of the header for the Service Record Handle */ uint8_t AttrHeaderSize; SDP_GetLocalAttributeContainerSize(ServiceRecord, &AttrHeaderSize); - + /* Retrieve the endian-swapped service handle of the current service being examined */ uint32_t CurrServiceHandle = SwapEndian_32(pgm_read_dword(ServiceRecord + AttrHeaderSize)); - + /* Check if the current service in the service table has the requested service handle */ if (ServiceHandle == CurrServiceHandle) { /* Add the listed attributes for the found UUID to the response */ TotalResponseSize = SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes, &CurrResponsePos); - + /* Requested service found, abort the search through the service table */ break; } @@ -243,7 +243,7 @@ static void SDP_ProcessServiceAttribute(const SDP_PDUHeader_t* const SDPHeader, /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created attribute value list and the SDP continuation state */ uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) + TotalResponseSize + sizeof(uint8_t)); - + /* Fill in the response packet's header */ ResponsePacket.SDPHeader.PDU = SDP_PDU_SERVICEATTRIBUTERESPONSE; ResponsePacket.SDPHeader.TransactionID = SDPHeader->TransactionID; @@ -265,30 +265,30 @@ static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHe Bluetooth_Channel_t* const Channel) { const void* CurrentParameter = ((const void*)SDPHeader + sizeof(SDP_PDUHeader_t)); - + BT_SDP_DEBUG(1, "<< Service Search Attribute"); /* Retrieve the list of search UUIDs from the request */ uint8_t UUIDList[12][UUID_SIZE_BYTES]; uint8_t TotalUUIDs = SDP_GetUUIDList(UUIDList, &CurrentParameter); BT_SDP_DEBUG(2, "-- Total UUIDs: %d", TotalUUIDs); - + /* Retrieve the maximum Attribute response size from the request */ uint16_t MaxAttributeSize = SDP_ReadData16(&CurrentParameter); BT_SDP_DEBUG(2, "-- Max Return Attribute Bytes: 0x%04X", MaxAttributeSize); - + /* Retrieve the list of Attributes from the request */ uint16_t AttributeList[8][2]; uint8_t TotalAttributes = SDP_GetAttributeList(AttributeList, &CurrentParameter); BT_SDP_DEBUG(2, "-- Total Attributes: %d", TotalAttributes); - + struct { SDP_PDUHeader_t SDPHeader; uint16_t AttributeListByteCount; uint8_t ResponseData[100]; } ResponsePacket; - + /* Create a pointer to the buffer to indicate the current location for response data to be added */ void* CurrResponsePos = ResponsePacket.ResponseData; @@ -298,7 +298,7 @@ static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHe /* Add the outer Data Element Sequence header for all of the retrieved Attributes */ uint16_t* TotalResponseSize = SDP_AddSequence16(&CurrResponsePos); - + /* Search through the global service list an item at a time */ for (uint8_t CurrTableItem = 0; CurrTableItem < (sizeof(SDP_Services_Table) / sizeof(void*)); CurrTableItem++) { @@ -307,14 +307,14 @@ static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHe if (!(SDP_SearchServiceTable(UUIDList, TotalUUIDs, CurrAttributeTable))) continue; - + BT_SDP_DEBUG(2, " -- Found search match in table"); /* Add the listed attributes for the found UUID to the response */ - *TotalResponseSize += SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes, + *TotalResponseSize += SDP_AddListedAttributesToResponse(CurrAttributeTable, AttributeList, TotalAttributes, &CurrResponsePos); } - + /* Continuation state - always zero */ SDP_WriteData8(&CurrResponsePos, 0); @@ -323,7 +323,7 @@ static void SDP_ProcessServiceSearchAttribute(const SDP_PDUHeader_t* const SDPHe /* Calculate the total parameter length that is to be sent, including the fixed return parameters, the created attribute value list and the SDP continuation state */ - uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) + + uint16_t ParamLength = (sizeof(ResponsePacket.AttributeListByteCount) + (3 + *TotalResponseSize) + sizeof(uint8_t)); @@ -366,7 +366,7 @@ static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* { uint16_t* AttributeIDRange = AttributeList[CurrAttribute]; void* AttributeValue; - + /* Look through the current service's attribute list, examining all the attributes */ while ((AttributeValue = pgm_read_ptr(&AttributeTable->Data)) != NULL) { @@ -377,9 +377,9 @@ static uint16_t SDP_AddListedAttributesToResponse(const ServiceAttributeTable_t* if ((CurrAttributeID >= AttributeIDRange[0]) && (CurrAttributeID <= AttributeIDRange[1])) { /* Increment the current UUID's returned Attribute container size by the number of added bytes */ - *AttributeListSize += SDP_AddAttributeToResponse(CurrAttributeID, AttributeValue, BufferPos); + *AttributeListSize += SDP_AddAttributeToResponse(CurrAttributeID, AttributeValue, BufferPos); } - + AttributeTable++; } } @@ -408,19 +408,19 @@ static uint16_t SDP_AddAttributeToResponse(const uint16_t AttributeID, /* Retrieve the size of the attribute value from its container header */ uint8_t AttributeHeaderLength; uint16_t AttributeValueLength = SDP_GetLocalAttributeContainerSize(AttributeValue, &AttributeHeaderLength); - + BT_SDP_DEBUG(2, " -- Add Attribute (0x%04X) 0x%04X", (AttributeHeaderLength + AttributeValueLength), AttributeID); /* Add a Data Element header to the response for the Attribute ID */ SDP_WriteData8(ResponseBuffer, (SDP_DATATYPE_UnsignedInt | SDP_DATASIZE_16Bit)); - + /* Add the Attribute ID to the created Data Element */ SDP_WriteData16(ResponseBuffer, AttributeID); - + /* Copy over the Attribute value Data Element container to the response */ memcpy_P(*ResponseBuffer, AttributeValue, AttributeHeaderLength + AttributeValueLength); *ResponseBuffer += AttributeHeaderLength + AttributeValueLength; - + return (sizeof(uint8_t) + sizeof(uint16_t) + AttributeHeaderLength + AttributeValueLength); } @@ -435,17 +435,17 @@ static void* SDP_GetAttributeValue(const ServiceAttributeTable_t* AttributeTable const uint16_t AttributeID) { void* CurrTableItemData; - + /* Search through the current Attribute table, abort when the terminator item has been reached */ while ((CurrTableItemData = pgm_read_ptr(&AttributeTable->Data)) != NULL) { /* Check if the current Attribute ID matches the search ID - if so return a pointer to it */ if (pgm_read_word(&AttributeTable->AttributeID) == AttributeID) return CurrTableItemData; - + AttributeTable++; } - + return NULL; } @@ -463,7 +463,7 @@ static bool SDP_SearchServiceTable(uint8_t UUIDList[][UUID_SIZE_BYTES], { const void* CurrAttribute; uint16_t UUIDMatchFlags = 0; - + /* Search through the current attribute table, checking each attribute value for UUID matches */ while ((CurrAttribute = pgm_read_ptr(&CurrAttributeTable->Data)) != NULL) { @@ -475,7 +475,7 @@ static bool SDP_SearchServiceTable(uint8_t UUIDList[][UUID_SIZE_BYTES], uint8_t UUIDMatches; for (UUIDMatches = 0; UUIDMatchFlags; UUIDMatches++) UUIDMatchFlags &= (UUIDMatchFlags - 1); - + /* If all UUIDs have been matched to the current service, return true */ return (UUIDMatches == TotalUUIDs); } @@ -501,7 +501,7 @@ static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES], if (CurrAttributeType == SDP_DATATYPE_UUID) { uint16_t CurrUUIDMatchMask = (1 << 0); - + /* Look for matches in the UUID list against the current attribute UUID value */ for (uint8_t i = 0; i < TotalUUIDs; i++) { @@ -512,7 +512,7 @@ static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES], *UUIDMatchFlags |= CurrUUIDMatchMask; break; } - + CurrUUIDMatchMask <<= 1; } } @@ -520,15 +520,15 @@ static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES], { uint8_t SequenceHeaderSize; uint16_t SequenceSize = SDP_GetLocalAttributeContainerSize(CurrAttribute, &SequenceHeaderSize); - + CurrAttribute += SequenceHeaderSize; - + /* Recursively unwrap the sequence container, and re-search its contents for UUIDs */ while (SequenceSize) { uint8_t InnerHeaderSize; uint16_t InnerSize = SDP_GetLocalAttributeContainerSize(CurrAttribute, &InnerHeaderSize); - + /* Recursively search of the next element in the sequence, trying to match UUIDs with the UUID list */ SDP_CheckUUIDMatch(UUIDList, TotalUUIDs, UUIDMatchFlags, CurrAttribute); @@ -536,10 +536,10 @@ static void SDP_CheckUUIDMatch(uint8_t UUIDList[][UUID_SIZE_BYTES], SequenceSize -= InnerHeaderSize + InnerSize; CurrAttribute += InnerHeaderSize + InnerSize; } - } + } } -/** Reads in the collection of Attribute ranges from the input buffer's Data Element Sequence container, into the given +/** Reads in the collection of Attribute ranges from the input buffer's Data Element Sequence container, into the given * Attribute list for later use. Once complete, the input buffer pointer is advanced to the end of the Attribute container. * * \param[out] AttributeList Pointer to a buffer where the list of Attribute ranges are to be stored @@ -561,10 +561,10 @@ static uint8_t SDP_GetAttributeList(uint16_t AttributeList[][2], /* Retrieve the size of the next Attribute in the container and get a pointer to the next free Attribute element in the list */ uint16_t* CurrentAttributeRange = AttributeList[TotalAttributes++]; uint8_t AttributeLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize); - + /* Copy over the starting Attribute ID and (if it the current element is a range) the ending Attribute ID */ memcpy(&CurrentAttributeRange[0], *CurrentParameter, AttributeLength); - + /* If the element is not an Attribute Range, copy over the starting ID to the ending ID to make a range of 1 */ if (AttributeLength == 2) CurrentAttributeRange[1] = CurrentAttributeRange[0]; @@ -574,15 +574,15 @@ static uint8_t SDP_GetAttributeList(uint16_t AttributeList[][2], CurrentAttributeRange[1] = SwapEndian_16(CurrentAttributeRange[1]); BT_SDP_DEBUG(2, "-- Attribute: 0x%04X-0x%04X", CurrentAttributeRange[0], CurrentAttributeRange[1]); - + AttributeIDListLength -= (AttributeLength + ElementHeaderSize); *CurrentParameter += AttributeLength; } - + return TotalAttributes; } -/** Reads in the collection of UUIDs from the input buffer's Data Element Sequence container, into the given +/** Reads in the collection of UUIDs from the input buffer's Data Element Sequence container, into the given * UUID list for later use. Once complete, the input buffer pointer is advanced to the end of the UUID container. * * \param[out] UUIDList Pointer to a buffer where the list of UUIDs are to be stored @@ -604,7 +604,7 @@ static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES], /* Retrieve the size of the next UUID in the container and get a pointer to the next free UUID element in the list */ uint8_t* CurrentUUID = UUIDList[TotalUUIDs++]; uint8_t UUIDLength = SDP_GetDataElementSize(CurrentParameter, &ElementHeaderSize); - + /* Copy over UUID from the container to the free slot */ if (UUIDLength <= 4) { @@ -617,9 +617,9 @@ static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES], else { /* Copy over full UUID */ - memcpy(CurrentUUID, *CurrentParameter, UUIDLength); + memcpy(CurrentUUID, *CurrentParameter, UUIDLength); } - + BT_SDP_DEBUG(2, "-- UUID (%d): %02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X", UUIDLength, CurrentUUID[0], CurrentUUID[1], CurrentUUID[2], CurrentUUID[3], @@ -631,7 +631,7 @@ static uint8_t SDP_GetUUIDList(uint8_t UUIDList[][UUID_SIZE_BYTES], ServicePatternLength -= (UUIDLength + ElementHeaderSize); *CurrentParameter += UUIDLength; } - + return TotalUUIDs; } @@ -647,7 +647,7 @@ static uint32_t SDP_GetLocalAttributeContainerSize(const void* const AttributeDa { /* Fetch the size of the Data Element structure from the header */ uint8_t SizeIndex = (pgm_read_byte(AttributeData) & 0x07); - + uint32_t ElementValueSize; /* Convert the Data Element size index into a size in bytes */ @@ -686,7 +686,7 @@ static uint32_t SDP_GetDataElementSize(const void** const DataElementHeader, uint8_t* const ElementHeaderSize) { /* Fetch the size of the Data Element structure from the header, increment the current buffer pos */ - uint8_t SizeIndex = (SDP_ReadData8(DataElementHeader) & 0x07); + uint8_t SizeIndex = (SDP_ReadData8(DataElementHeader) & 0x07); uint32_t ElementValueSize; @@ -710,6 +710,7 @@ static uint32_t SDP_GetDataElementSize(const void** const DataElementHeader, ElementValueSize = (1 << SizeIndex); break; } - + return ElementValueSize; } + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h index 2df8c225d..733889a4d 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDP.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -48,11 +48,11 @@ #include "BluetoothStack.h" #include "SDPServices.h" - + /* Macros: */ #define BT_SDP_DEBUG(l, s, ...) do { if (SDP_DEBUG_LEVEL >= l) printf_P(PSTR("(SDP) " s "\r\n"), ##__VA_ARGS__); } while (0) #define SDP_DEBUG_LEVEL 0 - + #define SDP_PDU_ERRORRESPONSE 0x01 #define SDP_PDU_SERVICESEARCHREQUEST 0x02 #define SDP_PDU_SERVICESEARCHRESPONSE 0x03 @@ -103,7 +103,7 @@ uint16_t TransactionID; /**< Unique transaction ID number to associate requests and responses */ uint16_t ParameterLength; /**< Length of the data following the SDP header */ } SDP_PDUHeader_t; - + /* Inline Functions: */ /** Writes 8 bits of raw data to the given buffer, incrementing the buffer position afterwards. * @@ -116,7 +116,7 @@ *((uint8_t*)*BufferPos) = Data; *BufferPos += sizeof(uint8_t); } - + /** Writes 16 bits of raw data to the given buffer, incrementing the buffer position afterwards. * * \param[in, out] BufferPos Current position in the buffer where the data is to be written to @@ -127,7 +127,7 @@ { *((uint16_t*)*BufferPos) = SwapEndian_16(Data); *BufferPos += sizeof(uint16_t); - } + } /** Writes 32 bits of raw data to the given buffer, incrementing the buffer position afterwards. * @@ -151,7 +151,7 @@ { uint8_t Data = *((const uint8_t*)*BufferPos); *BufferPos += sizeof(uint8_t); - + return Data; } @@ -165,7 +165,7 @@ { uint16_t Data = SwapEndian_16(*((const uint16_t*)*BufferPos)); *BufferPos += sizeof(uint16_t); - + return Data; } @@ -179,13 +179,13 @@ { uint32_t Data = SwapEndian_32(*((const uint32_t*)*BufferPos)); *BufferPos += sizeof(uint32_t); - + return Data; } - /** Adds a new Data Element Sequence container with a 16-bit size header to the buffer. The buffer + /** Adds a new Data Element Sequence container with a 16-bit size header to the buffer. The buffer * pointer's position is advanced past the added header once the element has been added. The returned - * size header value is pre-zeroed out so that it can be incremented as data is placed into the Data + * size header value is pre-zeroed out so that it can be incremented as data is placed into the Data * Element Sequence container. * * The total added size of the container header is three bytes, regardless of the size of its contents @@ -199,12 +199,12 @@ { SDP_WriteData8(BufferPos, (SDP_DATASIZE_Variable16Bit | SDP_DATATYPE_Sequence)); - uint16_t* SizePos = *BufferPos; + uint16_t* SizePos = *BufferPos; SDP_WriteData16(BufferPos, 0); return SizePos; } - + /* Function Prototypes: */ void SDP_ProcessPacket(void* Data, Bluetooth_Channel_t* const Channel); @@ -247,3 +247,4 @@ #endif #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c index 93f5519fe..9f7855e63 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -181,3 +181,4 @@ const ServiceAttributeTable_t PROGMEM SerialPort_Attribute_Table[] = SERVICE_ATTRIBUTE_TABLE_TERMINATOR }; + diff --git a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h index afa8e0024..3ec95c4d1 100644 --- a/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h +++ b/Demos/Host/Incomplete/BluetoothHost/Lib/SDPServices.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -35,22 +35,22 @@ #ifndef _SDPSERVICES_H_ #define _SDPSERVICES_H_ - + /* Includes: */ #include "SDP.h" /* Macros: */ /** Size of a full 128 bit UUID, in bytes. */ #define UUID_SIZE_BYTES 16 - + /** First 80 bits common to all standardized Bluetooth services. */ #define BASE_80BIT_UUID 0x0000, 0x0010, 0x0080, {0x00, 0x80, 0x5F, 0x9B, 0x34, 0xFB} - + #define RFCOMM_UUID {SWAPENDIAN_32(0x00000003), BASE_80BIT_UUID} #define L2CAP_UUID {SWAPENDIAN_32(0x00000100), BASE_80BIT_UUID} #define SP_CLASS_UUID {SWAPENDIAN_32(0x00001101), BASE_80BIT_UUID} #define PUBLICBROWSEGROUP_CLASS_UUID {SWAPENDIAN_32(0x00001002), BASE_80BIT_UUID} - + #define SDP_ATTRIBUTE_ID_SERVICERECORDHANDLE 0x0000 #define SDP_ATTRIBUTE_ID_SERVICECLASSIDS 0x0001 #define SDP_ATTRIBUTE_ID_PROTOCOLDESCRIPTORLIST 0x0004 @@ -58,10 +58,10 @@ #define SDP_ATTRIBUTE_ID_LANGUAGEBASEATTROFFSET 0x0006 #define SDP_ATTRIBUTE_ID_SERVICENAME 0x0100 #define SDP_ATTRIBUTE_ID_SERVICEDESCRIPTION 0x0101 - + /** Terminator for a service attribute table of type \ref ServiceAttributeTable_t. */ #define SERVICE_ATTRIBUTE_TABLE_TERMINATOR {.Data = NULL} - + /* Type Defines: */ /** Type define for a UUID value structure. This struct can be used to hold full 128-bit UUIDs. */ typedef struct @@ -72,7 +72,7 @@ uint16_t D; /**< Bits 64-79 of the UUID. */ uint8_t E[6]; /**< Bits 80-128 of the UUID. */ } UUID_t; - + /** Structure for the association of attribute ID values to an attribute value in FLASH. A table of these * structures can then be built up for each supported UUID service within the device. * @@ -111,7 +111,7 @@ uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_UUID | SDP_DATASIZE_128Bit) */ UUID_t UUID; /**< UUID to store in the list Data Element */ } ItemUUID_t; - + /** Structure for a list of Data Elements Sequences containing UUID Data Elements, for service attributes requiring * protocol lists. */ @@ -119,7 +119,7 @@ { uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */ uint8_t Size; /**< Size of the inner Data Element sequence */ - + struct { ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */ @@ -133,14 +133,14 @@ { uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */ uint8_t Size; /**< Size of the inner Data Element sequence */ - + struct { ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */ Item8Bit_t Param; /**< 8-Bit Parameter associated with the service */ } Protocol; } ItemProtocol_8BitParam_t; - + /** Structure for a list of Data Elements Sequences containing UUID Data Elements and an 16-bit param value, for service * attributes requiring extended protocol lists containing an 16-bit value. */ @@ -148,7 +148,7 @@ { uint8_t Header; /**< Data Element header, should be (SDP_DATATYPE_Sequence | SDP_DATASIZE_Variable8Bit) */ uint8_t Size; /**< Size of the inner Data Element sequence */ - + struct { ItemUUID_t UUID; /**< UUID to store in the protocol list Data Element sequence */ @@ -165,9 +165,10 @@ Item16Bit_t EncodingID; /**< Encoding used for the current language */ Item16Bit_t OffsetID; /**< Attribute offset added to all strings using this language within the service */ } ItemLangEncoding_t; - + /* External Variables: */ extern const ServiceAttributeTable_t SerialPort_Attribute_Table[]; extern const ServiceAttributeTable_t PnP_Attribute_Table[]; - + #endif + diff --git a/Demos/Host/Incomplete/BluetoothHost/makefile b/Demos/Host/Incomplete/BluetoothHost/makefile index 21f7d5a57..c8fd05907 100644 --- a/Demos/Host/Incomplete/BluetoothHost/makefile +++ b/Demos/Host/Incomplete/BluetoothHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -143,7 +143,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -156,7 +156,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -270,7 +270,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -283,7 +283,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -295,7 +295,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -307,7 +307,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -330,7 +330,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -364,7 +364,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -398,7 +398,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -427,7 +427,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -446,10 +446,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -514,11 +514,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -545,9 +545,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -645,14 +645,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -674,7 +674,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -718,3 +718,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c index 093c7db65..83eb30101 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -79,7 +79,7 @@ uint8_t ProcessConfigurationDescriptor(void) * but only found the mandatory IN endpoint, it's safe to continue with the device enumeration */ if (DataINEndpoint) break; - + /* Get the next HID interface from the configuration descriptor */ if (USB_GetNextDescriptorComp(&CurrConfigBytesRem, &CurrConfigLocation, DComp_NextHIDInterface) != DESCRIPTOR_SEARCH_COMP_Found) @@ -87,17 +87,17 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the interface in case we need to refer back to it later */ HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); /* Clear any found endpoints */ DataOUTEndpoint = NULL; - + /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -107,20 +107,20 @@ uint8_t ProcessConfigurationDescriptor(void) else DataOUTEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(HID_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); - + /* Check if the HID interface contained an optional OUT data endpoint */ if (DataOUTEndpoint) { /* Configure the HID data OUT pipe */ Pipe_ConfigurePipe(HID_DATA_OUT_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_OUT, DataOUTEndpoint->EndpointAddress, DataOUTEndpoint->EndpointSize, PIPE_BANK_SINGLE); - } - + } + /* Valid data found, return success */ return SuccessfulConfigRead; } @@ -145,7 +145,7 @@ uint8_t DComp_NextHIDInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + /* Current descriptor does not match what this comparator is looking for */ return DESCRIPTOR_SEARCH_NotFound; } @@ -176,3 +176,4 @@ uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor) /* Current descriptor does not match what this comparator is looking for */ return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h index e5a39479d..bde951439 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/GenericHIDHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,19 +38,19 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "GenericHIDHost.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define HID_CLASS 0x03 /** Pipe number for the HID data IN pipe. */ #define HID_DATA_IN_PIPE 1 - + /** Pipe number for the HID data OUT pipe. */ #define HID_DATA_OUT_PIPE 2 - + /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ enum GenericHIDHost_GetConfigDescriptorDataCodes_t @@ -60,7 +60,7 @@ DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ - }; + }; /* Function Prototypes: */ uint8_t ProcessConfigurationDescriptor(void); @@ -69,3 +69,4 @@ uint8_t DComp_NextHIDInterfaceDataEndpoint(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c index 66a5b8e7e..ba182607b 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the GenericHIDHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "GenericHIDHost.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -137,10 +137,10 @@ void ReadNextReport(void) { /* Refreeze HID data IN pipe */ Pipe_Freeze(); - + return; } - + /* Ensure pipe contains data before trying to read from it */ if (Pipe_IsReadWriteAllowed()) { @@ -148,17 +148,17 @@ void ReadNextReport(void) /* Read in HID report data */ Pipe_Read_Stream_LE(&ReportINData, sizeof(ReportINData)); - + /* Print report data through the serial port */ for (uint16_t CurrByte = 0; CurrByte < sizeof(ReportINData); CurrByte++) printf_P(PSTR("0x%02X "), ReportINData[CurrByte]); - + puts_P(PSTR("\r\n")); } - + /* Clear the IN endpoint, ready for next data packet */ Pipe_ClearIN(); - + /* Refreeze HID data IN pipe */ Pipe_Freeze(); } @@ -177,7 +177,7 @@ void WriteNextReport(uint8_t* ReportOUTData, { /* Select the HID data OUT pipe */ Pipe_SelectPipe(HID_DATA_OUT_PIPE); - + /* Not all HID devices have an OUT endpoint (some require OUT reports to be sent over the * control endpoint instead) - check to see if the OUT endpoint has been initialized */ if (Pipe_IsConfigured() && (ReportType == REPORT_TYPE_OUT)) @@ -189,17 +189,17 @@ void WriteNextReport(uint8_t* ReportOUTData, { /* Refreeze the data OUT pipe */ Pipe_Freeze(); - + return; } - + /* If the report index is used, send it before the report data */ if (ReportIndex) Pipe_Write_Byte(ReportIndex); /* Write out HID report data */ - Pipe_Write_Stream_LE(ReportOUTData, ReportLength); - + Pipe_Write_Stream_LE(ReportOUTData, ReportLength); + /* Clear the OUT endpoint, send last data packet */ Pipe_ClearOUT(); @@ -238,7 +238,7 @@ void HID_Host_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -248,7 +248,7 @@ void HID_Host_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -265,12 +265,12 @@ void HID_Host_Task(void) /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("HID Device Enumerated.\r\n")); USB_HostState = HOST_STATE_Configured; @@ -281,3 +281,4 @@ void HID_Host_Task(void) break; } } + diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h index 489fba896..e3fc32135 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,9 +49,9 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "ConfigDescriptor.h" - + /* Macros: */ /** HID Class specific request to send a HID report to the device. */ #define REQ_SetReport 0x09 @@ -67,7 +67,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** HID Report Type to indicate an IN report. */ #define REPORT_TYPE_IN 1 @@ -76,11 +76,11 @@ /** HID Report Type to indicate a FEATURE report. */ #define REPORT_TYPE_FEATURE 3 - + /* Function Prototypes: */ void SetupHardware(void); void HID_Host_Task(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -93,5 +93,6 @@ const uint8_t ReportIndex, const uint8_t ReportType, uint16_t ReportLength); - + #endif + diff --git a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt index e176507de..a82a77830 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt +++ b/Demos/Host/LowLevel/GenericHIDHost/GenericHIDHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Generic HID Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,14 +41,14 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Generic HID host demonstration application. This gives a simple reference * application for implementing a Generic HID USB host, for any device implementing * the HID profile. * * Received reports from the attached device are printed to the serial port. - * + * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. @@ -61,3 +61,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/GenericHIDHost/makefile b/Demos/Host/LowLevel/GenericHIDHost/makefile index b7342e007..d39f7e6d4 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/makefile +++ b/Demos/Host/LowLevel/GenericHIDHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -134,7 +134,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -147,7 +147,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -298,7 +298,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -321,7 +321,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -418,7 +418,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -505,11 +505,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -636,14 +636,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c index 3eaf7d960..20eaec7c9 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_HID_t* HIDDescriptor = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; @@ -95,12 +95,12 @@ uint8_t ProcessConfigurationDescriptor(void) } /* Save the HID descriptor for later use */ - HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); + HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -108,7 +108,7 @@ uint8_t ProcessConfigurationDescriptor(void) if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) DataINEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(JOYSTICK_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -140,7 +140,7 @@ uint8_t DComp_NextJoystickInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -181,5 +181,6 @@ uint8_t DComp_NextHID(void* CurrentDescriptor) if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_HID) return DESCRIPTOR_SEARCH_Found; else - return DESCRIPTOR_SEARCH_NotFound; + return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h index 58c63f9e5..5aafe7d39 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "HIDReport.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define JOYSTICK_CLASS 0x03 @@ -53,7 +53,7 @@ /** Descriptor header type constant for a HID report descriptor. */ #define DTYPE_Report 0x22 - + /** Pipe number for the joystick report data pipe. */ #define JOYSTICK_DATA_IN_PIPE 1 @@ -78,3 +78,4 @@ uint8_t DComp_NextHID(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c b/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c index bda99bdd0..76e26a0d5 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c +++ b/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ uint8_t GetHIDReportData(void) { /* Create a buffer big enough to hold the entire returned HID report */ uint8_t HIDReportData[HIDReportSize]; - + USB_ControlRequest = (USB_Request_Header_t) { .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE), @@ -66,7 +66,7 @@ uint8_t GetHIDReportData(void) /* Send the HID report to the parser for processing */ if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful) return ParseError; - + return ParseSuccessful; } @@ -100,7 +100,7 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) /* If a collection with the joystick usage was not found, indicate that we are not interested in this item */ if (!IsJoystick) return false; - + /* Check the attributes of the current joystick item - see if we are interested in it or not; * only store BUTTON and GENERIC_DESKTOP_CONTROL items into the Processed HID Report * structure to save RAM and ignore the rest @@ -108,3 +108,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) || (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL)); } + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h b/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h index da73ff823..0808806f7 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/HIDReport.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Host/HIDParser.h> - + #include "JoystickHostWithParser.h" /* Macros: */ @@ -66,16 +66,16 @@ ParseError = 1, /**< Failed to fully process the HID report descriptor */ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */ }; - + /* Type Defines: */ /** Type define for a HID descriptor. */ typedef struct { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ - + uint16_t HIDSpec; /**< Implemented HID class specification, in BCD encoded format */ uint8_t CountryCode; /**< Country code value for localized hardware */ - + uint8_t TotalHIDDescriptors; /**< Total number of HID report descriptors in the current interface */ uint8_t HIDReportType; /**< HID report type of the first HID report descriptor */ @@ -88,7 +88,8 @@ /* Function Prototypes: */ uint8_t GetHIDReportData(void); - + bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c index c7739e97f..3bd27da11 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c +++ b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the JoystickHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "JoystickHostWithParser.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -64,7 +64,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ SerialStream_Init(9600, false); LEDs_Init(); @@ -118,7 +118,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8 " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -134,7 +134,7 @@ void Joystick_HID_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -144,7 +144,7 @@ void Joystick_HID_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -152,7 +152,7 @@ void Joystick_HID_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -161,12 +161,12 @@ void Joystick_HID_Task(void) /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize); /* Get and process the device's first HID report descriptor */ @@ -178,21 +178,21 @@ void Joystick_HID_Task(void) puts_P(PSTR("Not a valid Joystick." ESC_FG_WHITE)); else printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf("Total Reports: %d\r\n", HIDReportInfo.TotalDeviceReports); for (uint8_t i = 0; i < HIDReportInfo.TotalDeviceReports; i++) { HID_ReportSizeInfo_t* CurrReportIDInfo = &HIDReportInfo.ReportIDSizes[i]; - + uint8_t ReportSizeInBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_In]; uint8_t ReportSizeOutBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Out]; uint8_t ReportSizeFeatureBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Feature]; @@ -211,9 +211,9 @@ void Joystick_HID_Task(void) break; case HOST_STATE_Configured: /* Select and unfreeze joystick data pipe */ - Pipe_SelectPipe(JOYSTICK_DATA_IN_PIPE); + Pipe_SelectPipe(JOYSTICK_DATA_IN_PIPE); Pipe_Unfreeze(); - + /* Check to see if a packet has been received */ if (Pipe_IsINReceived()) { @@ -225,11 +225,11 @@ void Joystick_HID_Task(void) /* Load in the joystick report */ Pipe_Read_Stream_LE(JoystickReport, Pipe_BytesInPipe()); - + /* Process the read in joystick report from the device */ ProcessJoystickReport(JoystickReport); } - + /* Clear the IN endpoint, ready for next data packet */ Pipe_ClearIN(); } @@ -254,7 +254,7 @@ void ProcessJoystickReport(uint8_t* JoystickReport) { /* Create a temporary item pointer to the next report item */ HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber]; - + bool FoundData; if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) && @@ -262,7 +262,7 @@ void ProcessJoystickReport(uint8_t* JoystickReport) { /* Get the joystick button value */ FoundData = USB_GetHIDReportItemInfo(JoystickReport, ReportItem); - + /* For multi-report devices - if the requested data was not in the issued report, continue */ if (!(FoundData)) continue; @@ -278,13 +278,13 @@ void ProcessJoystickReport(uint8_t* JoystickReport) { /* Get the joystick relative position value */ FoundData = USB_GetHIDReportItemInfo(JoystickReport, ReportItem); - + /* For multi-report devices - if the requested data was not in the issued report, continue */ if (!(FoundData)) continue; - + int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t); - + /* Check to see if a (non-zero) delta movement has been indicated */ if (DeltaMovement) { @@ -296,7 +296,7 @@ void ProcessJoystickReport(uint8_t* JoystickReport) } } } - + /* Display the button information on the board LEDs */ LEDs_SetAllLEDs(LEDMask); -}
\ No newline at end of file +} diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h index 5f34dba03..403465fbe 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h +++ b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,7 +49,7 @@ #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> - + #include "ConfigDescriptor.h" #include "HIDReport.h" @@ -69,7 +69,7 @@ /* Function Prototypes: */ void Joystick_HID_Task(void); void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -80,3 +80,4 @@ void ProcessJoystickReport(uint8_t* JoystickReport); #endif + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt index 055890b70..0fa97f868 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt +++ b/Demos/Host/LowLevel/JoystickHostWithParser/JoystickHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Joystick Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,19 +41,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Joystick host demonstration application. This gives a simple reference * application for implementing a USB Joystick host, for USB joysticks using * the standard joystick HID profile. It uses a HID parser for the HID * reports, allowing for correct operation across all USB joysticks. This * demo supports joysticks with a single HID report. - * + * * Joystick movement and button presses are displayed on the board LEDs. * On connection to a USB joystick, the report items will be processed and * printed as a formatted list through the USART before the joystick is * fully enumerated. - * + * * Currently only single interface joysticks are supported. * * \section SSec_Options Project Options @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/makefile b/Demos/Host/LowLevel/JoystickHostWithParser/makefile index 39b13ed36..ec35eeb38 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/makefile +++ b/Demos/Host/LowLevel/JoystickHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c index e1e32ed7c..ea42a28ab 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; @@ -66,7 +66,7 @@ uint8_t ProcessConfigurationDescriptor(void) default: return ControlError; } - + while (!(DataINEndpoint)) { /* See if we've found a likely compatible interface, and if there is an endpoint within that interface */ @@ -88,7 +88,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -96,7 +96,7 @@ uint8_t ProcessConfigurationDescriptor(void) if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) DataINEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -125,7 +125,7 @@ uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -152,3 +152,4 @@ uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h index f8fed3e58..14f691b68 100644 --- a/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,16 +38,16 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "KeyboardHost.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define KEYBOARD_CLASS 0x03 /** Interface Protocol value for a Boot Protocol Keyboard compliant device. */ #define KEYBOARD_PROTOCOL 0x01 - + /** Pipe number for the keyboard data IN pipe. */ #define KEYBOARD_DATA_IN_PIPE 1 @@ -64,8 +64,9 @@ /* Function Prototypes: */ uint8_t ProcessConfigurationDescriptor(void); - + uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor); uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c index 0c24bc9e2..269fe2779 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the KeyboardHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "KeyboardHost.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -129,9 +129,9 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, void ReadNextReport(void) { USB_KeyboardReport_Data_t KeyboardReport; - + /* Select keyboard data pipe */ - Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); + Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); /* Unfreeze keyboard data pipe */ Pipe_Unfreeze(); @@ -141,10 +141,10 @@ void ReadNextReport(void) { /* Refreeze HID data IN pipe */ Pipe_Freeze(); - + return; } - + /* Ensure pipe contains data before trying to read from it */ if (Pipe_IsReadWriteAllowed()) { @@ -153,13 +153,13 @@ void ReadNextReport(void) /* Indicate if the modifier byte is non-zero (special key such as shift is being pressed) */ LEDs_ChangeLEDs(LEDS_LED1, (KeyboardReport.Modifier) ? LEDS_LED1 : 0); - + /* Check if a key has been pressed */ if (KeyboardReport.KeyCode) { /* Toggle status LED to indicate keypress */ LEDs_ToggleLEDs(LEDS_LED2); - + char PressedKey = 0; /* Retrieve pressed key character if alphanumeric */ @@ -168,16 +168,16 @@ void ReadNextReport(void) else if ((KeyboardReport.KeyCode[0] >= 0x1E) && (KeyboardReport.KeyCode[0] <= 0x27)) PressedKey = (KeyboardReport.KeyCode[0] - 0x1E) + '0'; else if (KeyboardReport.KeyCode[0] == 0x2C) - PressedKey = ' '; + PressedKey = ' '; else if (KeyboardReport.KeyCode[0] == 0x28) PressedKey = '\n'; - + /* Print the pressed key character out through the serial port if valid */ if (PressedKey) putchar(PressedKey); } } - + /* Clear the IN endpoint, ready for next data packet */ Pipe_ClearIN(); @@ -196,7 +196,7 @@ void Keyboard_HID_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -206,7 +206,7 @@ void Keyboard_HID_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -214,7 +214,7 @@ void Keyboard_HID_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -228,7 +228,7 @@ void Keyboard_HID_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* HID class request to set the keyboard protocol to the Boot Protocol */ USB_ControlRequest = (USB_Request_Header_t) { @@ -250,7 +250,7 @@ void Keyboard_HID_Task(void) /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; @@ -267,3 +267,4 @@ void Keyboard_HID_Task(void) break; } } + diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h index 0c6075330..63d6c06b5 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,9 +49,9 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "ConfigDescriptor.h" - + /* Macros: */ /** HID Class Specific request to set the report protocol mode. */ #define REQ_SetProtocol 0x0B @@ -76,11 +76,11 @@ uint8_t Reserved; /**< Reserved for OEM use, always set to 0 */ uint8_t KeyCode[6]; /**< Key codes of the currently pressed keys */ } USB_KeyboardReport_Data_t; - + /* Function Prototypes: */ void Keyboard_HID_Task(void); void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -89,5 +89,6 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void); void ReadNextReport(void); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt index 397150175..810634dcd 100644 --- a/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt +++ b/Demos/Host/LowLevel/KeyboardHost/KeyboardHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,21 +41,21 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard host demonstration application. This gives a simple reference * application for implementing a USB keyboard, for USB keyboards using * the standard keyboard HID profile. - * + * * Pressed alpha-numeric, enter or space key is transmitted through the serial * USART at serial settings 9600, 8, N, 1. - * + * * This uses a naive method where the keyboard is set to Boot Protocol mode, so * that the report structure is fixed and known. A better implementation * uses the HID report parser for correct report data processing across * all compatible mice with advanced characteristics, as shown in the * KeyboardHostWithParser demo application. - * + * * Currently only single interface keyboards are supported. * * \section SSec_Options Project Options @@ -70,3 +70,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/KeyboardHost/makefile b/Demos/Host/LowLevel/KeyboardHost/makefile index 6d8634ce1..13bf64d63 100644 --- a/Demos/Host/LowLevel/KeyboardHost/makefile +++ b/Demos/Host/LowLevel/KeyboardHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -134,7 +134,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -147,7 +147,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -298,7 +298,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -321,7 +321,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -418,7 +418,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -505,11 +505,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -636,14 +636,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c index 74817a2f1..fe35d95b7 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_HID_t* HIDDescriptor = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; @@ -82,7 +82,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the interface in case we need to refer back to it later */ HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); @@ -93,14 +93,14 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the HID descriptor for later use */ - HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); - + HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); + /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -108,7 +108,7 @@ uint8_t ProcessConfigurationDescriptor(void) if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) DataINEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(KEYBOARD_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -140,7 +140,7 @@ uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -183,5 +183,6 @@ uint8_t DComp_NextHID(void* CurrentDescriptor) else if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Interface) return DESCRIPTOR_SEARCH_Fail; else - return DESCRIPTOR_SEARCH_NotFound; + return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h index a7bc1d34c..d23c89dd0 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "HIDReport.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define KEYBOARD_CLASS 0x03 @@ -53,7 +53,7 @@ /** Descriptor header type constant for a HID report descriptor. */ #define DTYPE_Report 0x22 - + /** Pipe number for the keyboard report data pipe. */ #define KEYBOARD_DATA_IN_PIPE 1 @@ -74,5 +74,6 @@ uint8_t DComp_NextKeyboardInterface(void* CurrentDescriptor); uint8_t DComp_NextKeyboardInterfaceDataEndpoint(void* CurrentDescriptor); uint8_t DComp_NextHID(void* CurrentDescriptor); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c index 6b4df377d..d2dde64bd 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ uint8_t GetHIDReportData(void) { /* Create a buffer big enough to hold the entire returned HID report */ uint8_t HIDReportData[HIDReportSize]; - + USB_ControlRequest = (USB_Request_Header_t) { .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE), @@ -66,7 +66,7 @@ uint8_t GetHIDReportData(void) /* Send the HID report to the parser for processing */ if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful) return ParseError; - + return ParseSuccessful; } @@ -87,3 +87,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) */ return (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_KEYBOARD); } + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h index 09cace965..e18ad3aae 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/HIDReport.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Host/HIDParser.h> - + #include "KeyboardHostWithParser.h" /* Macros: */ @@ -54,16 +54,16 @@ ParseError = 1, /**< Failed to fully process the HID report descriptor */ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */ }; - + /* Type Defines: */ /** Type define for a HID descriptor. */ typedef struct { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ - + uint16_t HIDSpec; /**< Implemented HID class specification, in BCD encoded format */ uint8_t CountryCode; /**< Country code value for localized hardware */ - + uint8_t TotalHIDDescriptors; /**< Total number of HID report descriptors in the current interface */ uint8_t HIDReportType; /**< HID report type of the first HID report descriptor */ @@ -78,5 +78,6 @@ uint8_t GetHIDReportData(void); bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c index 15bc94061..bdf4a2830 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the KeyboardHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "KeyboardHostWithParser.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -119,7 +119,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -134,7 +134,7 @@ void Keyboard_HID_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -144,7 +144,7 @@ void Keyboard_HID_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -167,9 +167,9 @@ void Keyboard_HID_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize); - + /* Get and process the device's first HID report descriptor */ if ((ErrorCode = GetHIDReportData()) != ParseSuccessful) { @@ -179,13 +179,13 @@ void Keyboard_HID_Task(void) puts_P(PSTR("Not a valid Keyboard." ESC_FG_WHITE)); else printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } printf("Total Reports: %d\r\n", HIDReportInfo.TotalDeviceReports); @@ -193,7 +193,7 @@ void Keyboard_HID_Task(void) for (uint8_t i = 0; i < HIDReportInfo.TotalDeviceReports; i++) { HID_ReportSizeInfo_t* CurrReportIDInfo = &HIDReportInfo.ReportIDSizes[i]; - + uint8_t ReportSizeInBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_In]; uint8_t ReportSizeOutBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Out]; uint8_t ReportSizeFeatureBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Feature]; @@ -212,7 +212,7 @@ void Keyboard_HID_Task(void) break; case HOST_STATE_Configured: /* Select and unfreeze keyboard data pipe */ - Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); + Pipe_SelectPipe(KEYBOARD_DATA_IN_PIPE); Pipe_Unfreeze(); /* Check to see if a packet has been received */ @@ -226,11 +226,11 @@ void Keyboard_HID_Task(void) /* Load in the keyboard report */ Pipe_Read_Stream_LE(KeyboardReport, Pipe_BytesInPipe()); - + /* Process the read in keyboard report from the device */ ProcessKeyboardReport(KeyboardReport); } - + /* Clear the IN endpoint, ready for next data packet */ Pipe_ClearIN(); } @@ -262,11 +262,11 @@ void ProcessKeyboardReport(uint8_t* KeyboardReport) { /* Retrieve the keyboard scan-code from the report data retrieved from the device */ bool FoundData = USB_GetHIDReportItemInfo(KeyboardReport, ReportItem); - + /* For multi-report devices - if the requested data was not in the issued report, continue */ if (!(FoundData)) continue; - + /* Key code is an unsigned char in length, cast to the appropriate type */ uint8_t KeyCode = (uint8_t)ReportItem->Value; @@ -284,17 +284,18 @@ void ProcessKeyboardReport(uint8_t* KeyboardReport) else if ((KeyCode >= 0x1E) && (KeyCode <= 0x27)) PressedKey = (KeyCode - 0x1E) + '0'; else if (KeyCode == 0x2C) - PressedKey = ' '; + PressedKey = ' '; else if (KeyCode == 0x28) PressedKey = '\n'; - + /* Print the pressed key character out through the serial port if valid */ if (PressedKey) putchar(PressedKey); } - + /* Once a scan-code is found, stop scanning through the report items */ break; } } } + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h index 4aaea382f..3a5f138a1 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,7 +44,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "ConfigDescriptor.h" #include "HIDReport.h" @@ -60,7 +60,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void Keyboard_HID_Task(void); void SetupHardware(void); @@ -73,5 +73,6 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void); void ProcessKeyboardReport(uint8_t* KeyboardReport); - + #endif + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt index 5e122a38f..50f6c861d 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/KeyboardHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Keyboard Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,20 +41,20 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Keyboard host demonstration application. This gives a simple reference * application for implementing a USB Keyboard host, for USB keyboards using * the standard Keyboard HID profile. It uses a HID parser for the HID reports, * allowing for correct operation across all USB keyboards. This demo supports * keyboards with a single HID report. - * + * * Pressed alpha-numeric, enter or space key is transmitted through the serial * USART at serial settings 9600, 8, N, 1. On connection to a USB keyboard, the * report items will be processed and printed as a formatted list through the * USART before the keyboard is fully enumerated. - * - * Currently only single interface keyboards are supported. + * + * Currently only single interface keyboards are supported. * * \section SSec_Options Project Options * @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile index db8f91911..04bb9ab79 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/makefile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c index 7feb31251..874fa7a3a 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * needed to communication with an attached USB device. Descriptors are special computer-readable structures * which the host requests upon device enumeration, to determine the device's capabilities and functions. */ - + #include "ConfigDescriptor.h" /** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* MIDIInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -67,7 +67,7 @@ uint8_t ProcessConfigurationDescriptor(void) default: return ControlError; } - + while (!(DataINEndpoint) || !(DataOUTEndpoint)) { /* See if we've found a likely compatible interface, and if there is an endpoint within that interface */ @@ -93,7 +93,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -103,7 +103,7 @@ uint8_t ProcessConfigurationDescriptor(void) else DataOUTEndpoint = EndpointData; } - + /* Configure the MIDI data IN pipe */ Pipe_ConfigurePipe(MIDI_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -136,7 +136,7 @@ uint8_t DComp_NextMIDIStreamingInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -155,7 +155,7 @@ uint8_t DComp_NextMIDIStreamingDataEndpoint(void* CurrentDescriptor) { uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK); - + /* Check the endpoint type, break out if correct BULK type endpoint found */ if (EndpointType == EP_TYPE_BULK) return DESCRIPTOR_SEARCH_Found; @@ -167,3 +167,4 @@ uint8_t DComp_NextMIDIStreamingDataEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h index 80a05667d..57a36d924 100644 --- a/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MIDIHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,19 +38,19 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "MIDIHost.h" - + /* Macros: */ /** Interface Class value for the MIDI Audio class. */ #define MIDI_STREAMING_CLASS 0x01 - + /** Interface Class value for the MIDI Audio Streaming subclass. */ #define MIDI_STREAMING_SUBCLASS 0x03 /** Interface Class value for the MIDI Audio Streaming protocol. */ #define MIDI_STREAMING_PROTOCOL 0x00 - + /** Pipe number for the MIDI data IN pipe. */ #define MIDI_DATA_IN_PIPE 1 @@ -69,9 +69,10 @@ }; /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); - + uint8_t ProcessConfigurationDescriptor(void); + uint8_t DComp_NextMIDIStreamingInterface(void* CurrentDescriptor); uint8_t DComp_NextMIDIStreamingDataEndpoint(void* CurrentDescriptor); - + #endif + diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.c b/Demos/Host/LowLevel/MIDIHost/MIDIHost.c index 7725f5d8a..63ed6da25 100644 --- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.c +++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MIDIHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MIDIHost.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -121,7 +121,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -137,7 +137,7 @@ void MIDI_Host_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -147,7 +147,7 @@ void MIDI_Host_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -155,7 +155,7 @@ void MIDI_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -176,16 +176,16 @@ void MIDI_Host_Task(void) break; case HOST_STATE_Configured: Pipe_SelectPipe(MIDI_DATA_IN_PIPE); - + if (Pipe_IsINReceived()) { USB_MIDI_EventPacket_t MIDIEvent; - + Pipe_Read_Stream_LE(&MIDIEvent, sizeof(MIDIEvent)); - + bool NoteOnEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_ON >> 4)); bool NoteOffEvent = ((MIDIEvent.Command & 0x0F) == (MIDI_COMMAND_NOTE_OFF >> 4)); - + if (NoteOnEvent || NoteOffEvent) { printf_P(PSTR("MIDI Note %s - Channel %d, Pitch %d, Velocity %d\r\n"), NoteOnEvent ? "On" : "Off", @@ -195,19 +195,19 @@ void MIDI_Host_Task(void) Pipe_ClearIN(); } - + Pipe_SelectPipe(MIDI_DATA_OUT_PIPE); - + static uint8_t PrevJoystickStatus; if (Pipe_IsOUTReady()) { uint8_t MIDICommand = 0; uint8_t MIDIPitch; - + uint8_t JoystickStatus = Joystick_GetStatus(); uint8_t JoystickChanges = (JoystickStatus ^ PrevJoystickStatus); - + /* Get board button status - if pressed use channel 10 (percussion), otherwise use channel 1 */ uint8_t Channel = ((Buttons_GetStatus() & BUTTONS_BUTTON1) ? MIDI_CHANNEL(10) : MIDI_CHANNEL(1)); @@ -228,7 +228,7 @@ void MIDI_Host_Task(void) MIDICommand = ((JoystickStatus & JOY_RIGHT)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); MIDIPitch = 0x3E; } - + if (JoystickChanges & JOY_DOWN) { MIDICommand = ((JoystickStatus & JOY_DOWN)? MIDI_COMMAND_NOTE_ON : MIDI_COMMAND_NOTE_OFF); @@ -248,19 +248,19 @@ void MIDI_Host_Task(void) { .CableNumber = 0, .Command = (MIDICommand >> 4), - + .Data1 = MIDICommand | Channel, .Data2 = MIDIPitch, - .Data3 = MIDI_STANDARD_VELOCITY, + .Data3 = MIDI_STANDARD_VELOCITY, }; - + /* Write the MIDI event packet to the pipe */ Pipe_Write_Stream_LE(&MIDIEvent, sizeof(MIDIEvent)); - + /* Send the data in the pipe to the device */ Pipe_ClearOUT(); } - + /* Save previous joystick value for next joystick change detection */ PrevJoystickStatus = JoystickStatus; } @@ -268,3 +268,4 @@ void MIDI_Host_Task(void) break; } } + diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.h b/Demos/Host/LowLevel/MIDIHost/MIDIHost.h index 507f0787c..f7fb57a91 100644 --- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.h +++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -51,19 +51,19 @@ #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/Board/Buttons.h> #include <LUFA/Drivers/Board/Joystick.h> - + #include "ConfigDescriptor.h" - + /* Macros: */ /** MIDI command for a note on (activation) event. */ #define MIDI_COMMAND_NOTE_ON 0x90 /** MIDI command for a note off (deactivation) event. */ #define MIDI_COMMAND_NOTE_OFF 0x80 - + /** Standard key press velocity value used for all note events, as no pressure sensor is mounted. */ #define MIDI_STANDARD_VELOCITY 64 - + /** Convenience macro. MIDI channels are numbered from 1-10 (natural numbers) however the logical channel * addresses are zero-indexed. This converts a natural MIDI channel number into the logical channel address. * @@ -89,21 +89,22 @@ { unsigned char Command : 4; /**< MIDI command being sent or received in the event packet */ unsigned char CableNumber : 4; /**< Virtual cable number of the event being sent or received in the given MIDI interface */ - + uint8_t Data1; /**< First byte of data in the MIDI event */ uint8_t Data2; /**< Second byte of data in the MIDI event */ - uint8_t Data3; /**< Third byte of data in the MIDI event */ + uint8_t Data3; /**< Third byte of data in the MIDI event */ } USB_MIDI_EventPacket_t; /* Function Prototypes: */ void SetupHardware(void); void MIDI_Host_Task(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt index a90ae04d3..337dba72e 100644 --- a/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt +++ b/Demos/Host/LowLevel/MIDIHost/MIDIHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage MIDI Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>MIDI Subclass</td> * </tr> @@ -39,7 +39,7 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * MIDI host demonstration application. This demo will enumerate an attached USB-MIDI device, and print incoming MIDI note * on and off messages on any channel to the serial port. Pressing the board joystick will send note on and off messages to @@ -57,3 +57,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/MIDIHost/makefile b/Demos/Host/LowLevel/MIDIHost/makefile index 36b231598..2940c5468 100644 --- a/Demos/Host/LowLevel/MIDIHost/makefile +++ b/Demos/Host/LowLevel/MIDIHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -134,7 +134,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -147,7 +147,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -298,7 +298,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -321,7 +321,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -418,7 +418,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -505,11 +505,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -636,14 +636,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c index 3468e0db9..f336d62bf 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * needed to communication with an attached USB device. Descriptors are special computer-readable structures * which the host requests upon device enumeration, to determine the device's capabilities and functions. */ - + #include "ConfigDescriptor.h" /** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* MSInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -93,7 +93,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -103,7 +103,7 @@ uint8_t ProcessConfigurationDescriptor(void) else DataOUTEndpoint = EndpointData; } - + /* Configure the Mass Storage data IN pipe */ Pipe_ConfigurePipe(MASS_STORE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -136,7 +136,7 @@ uint8_t DComp_NextMSInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -167,3 +167,4 @@ uint8_t DComp_NextMSInterfaceBulkDataEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h index d75789192..92c984068 100644 --- a/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MassStorageHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "MassStorageHost.h" - + /* Macros: */ /** Interface Class value for the Mass Storage Device class. */ #define MASS_STORE_CLASS 0x08 @@ -67,11 +67,12 @@ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ }; - + /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); + uint8_t ProcessConfigurationDescriptor(void); uint8_t DComp_NextMSInterface(void* CurrentDescriptor); uint8_t DComp_NextMSInterfaceBulkDataEndpoint(void* CurrentDescriptor); - + #endif + diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c index c86e51b0c..712589660 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c +++ b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ * larger value in the project makefile and passing it to the compiler * via the -D switch. */ - + #define INCLUDE_FROM_MASSSTORE_COMMANDS_C #include "MassStoreCommands.h" @@ -85,13 +85,13 @@ static uint8_t MassStore_SendCommand(CommandBlockWrapper_t* const SCSICommandBlo /* Send the data in the OUT pipe to the attached device */ Pipe_ClearOUT(); - + /* Wait until command has been sent */ Pipe_WaitUntilReady(); /* Freeze pipe after use */ Pipe_Freeze(); - + /* Send data if any */ if ((BufferPtr != NULL) && ((ErrorCode = MassStore_SendReceiveData(SCSICommandBlock, BufferPtr)) != PIPE_READYWAIT_NoError)) @@ -99,7 +99,7 @@ static uint8_t MassStore_SendCommand(CommandBlockWrapper_t* const SCSICommandBlo Pipe_Freeze(); return ErrorCode; } - + return ErrorCode; } @@ -116,12 +116,12 @@ static uint8_t MassStore_WaitForDataReceived(void) /* Select the IN data pipe for data reception */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); - + /* Wait until data received in the IN pipe */ while (!(Pipe_IsINReceived())) { uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber(); - + /* Check to see if a new frame has been issued (1ms elapsed) */ if (CurrentFrameNumber != PreviousFrameNumber) { @@ -133,7 +133,7 @@ static uint8_t MassStore_WaitForDataReceived(void) if (!(TimeoutMSRem)) return PIPE_RWSTREAM_Timeout; } - + Pipe_Freeze(); Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); Pipe_Unfreeze(); @@ -146,7 +146,7 @@ static uint8_t MassStore_WaitForDataReceived(void) return PIPE_RWSTREAM_PipeStalled; } - + Pipe_Freeze(); Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); @@ -159,15 +159,15 @@ static uint8_t MassStore_WaitForDataReceived(void) return PIPE_RWSTREAM_PipeStalled; } - + /* Check to see if the device was disconnected, if so exit function */ if (USB_HostState == HOST_STATE_Unattached) return PIPE_RWSTREAM_DeviceDisconnected; }; - + Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Freeze(); - + Pipe_SelectPipe(MASS_STORE_DATA_OUT_PIPE); Pipe_Freeze(); @@ -194,11 +194,11 @@ static uint8_t MassStore_SendReceiveData(CommandBlockWrapper_t* const SCSIComman /* Wait until the device has replied with some data */ if ((ErrorCode = MassStore_WaitForDataReceived()) != PIPE_RWSTREAM_NoError) return ErrorCode; - + /* Select the IN data pipe for data reception */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); - + /* Read in the block data from the pipe */ if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem)) != PIPE_RWSTREAM_NoError) return ErrorCode; @@ -218,14 +218,14 @@ static uint8_t MassStore_SendReceiveData(CommandBlockWrapper_t* const SCSIComman /* Acknowledge the packet */ Pipe_ClearOUT(); - + while (!(Pipe_IsOUTReady())) { if (USB_HostState == HOST_STATE_Unattached) return PIPE_RWSTREAM_DeviceDisconnected; } } - + /* Freeze used pipe after use */ Pipe_Freeze(); @@ -249,21 +249,21 @@ static uint8_t MassStore_GetReturnedStatus(CommandStatusWrapper_t* const SCSICom /* Select the IN data pipe for data reception */ Pipe_SelectPipe(MASS_STORE_DATA_IN_PIPE); Pipe_Unfreeze(); - + /* Load in the CSW from the attached device */ if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(CommandStatusWrapper_t))) != PIPE_RWSTREAM_NoError) return ErrorCode; - + /* Clear the data ready for next reception */ Pipe_ClearIN(); - + /* Freeze the IN pipe after use */ Pipe_Freeze(); - + /* Check to see if command failed */ if (SCSICommandStatus->Status != Command_Pass) ErrorCode = MASS_STORE_SCSI_COMMAND_FAILED; - + return ErrorCode; } @@ -282,7 +282,7 @@ uint8_t MassStore_MassStorageReset(void) .wIndex = 0, .wLength = 0, }; - + /* Select the control pipe for the request transfer */ Pipe_SelectPipe(PIPE_CONTROLPIPE); @@ -312,7 +312,7 @@ uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex) .wIndex = 0, .wLength = 1, }; - + /* Select the control pipe for the request transfer */ Pipe_SelectPipe(PIPE_CONTROLPIPE); @@ -320,14 +320,14 @@ uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex) { /* Clear the pipe stall */ Pipe_ClearStall(); - + /* Some faulty Mass Storage devices don't implement the GET_MAX_LUN request, so assume a single LUN */ *MaxLUNIndex = 0; - + /* Clear the error, and pretend the request executed correctly if the device STALLed it */ ErrorCode = HOST_SENDCONTROL_Successful; } - + return ErrorCode; } @@ -362,7 +362,7 @@ uint8_t MassStore_Inquiry(const uint8_t LUNIndex, 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -371,7 +371,7 @@ uint8_t MassStore_Inquiry(const uint8_t LUNIndex, Pipe_Freeze(); return ErrorCode; } - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -413,7 +413,7 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -422,7 +422,7 @@ uint8_t MassStore_RequestSense(const uint8_t LUNIndex, Pipe_Freeze(); return ErrorCode; } - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -474,7 +474,7 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -483,7 +483,7 @@ uint8_t MassStore_ReadDeviceBlock(const uint8_t LUNIndex, Pipe_Freeze(); return ErrorCode; } - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -535,7 +535,7 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -544,7 +544,7 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, Pipe_Freeze(); return ErrorCode; } - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -564,7 +564,7 @@ uint8_t MassStore_WriteDeviceBlock(const uint8_t LUNIndex, */ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex) { - uint8_t ErrorCode = PIPE_RWSTREAM_NoError; + uint8_t ErrorCode = PIPE_RWSTREAM_NoError; /* Create a CBW with a SCSI command to issue TEST UNIT READY command */ CommandBlockWrapper_t SCSICommandBlock = (CommandBlockWrapper_t) @@ -584,7 +584,7 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex) 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -593,7 +593,7 @@ uint8_t MassStore_TestUnitReady(const uint8_t LUNIndex) Pipe_Freeze(); return ErrorCode; } - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -639,7 +639,7 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -648,11 +648,11 @@ uint8_t MassStore_ReadCapacity(const uint8_t LUNIndex, Pipe_Freeze(); return ErrorCode; } - + /* Endian-correct the read data */ CapacityPtr->Blocks = SwapEndian_32(CapacityPtr->Blocks); CapacityPtr->BlockSize = SwapEndian_32(CapacityPtr->BlockSize); - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -695,7 +695,7 @@ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, 0x00 // Unused (control) } }; - + CommandStatusWrapper_t SCSICommandStatus; /* Send the command and any data to the attached device */ @@ -704,7 +704,7 @@ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, Pipe_Freeze(); return ErrorCode; } - + /* Retrieve status information from the attached device */ if ((ErrorCode = MassStore_GetReturnedStatus(&SCSICommandStatus)) != PIPE_RWSTREAM_NoError) { @@ -714,3 +714,4 @@ uint8_t MassStore_PreventAllowMediumRemoval(const uint8_t LUNIndex, return ErrorCode; } + diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h index 628066363..8fcffe424 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h +++ b/Demos/Host/LowLevel/MassStorageHost/Lib/MassStoreCommands.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for MassStoreCommands.c. */ - + #ifndef _MASS_STORE_COMMANDS_H_ #define _MASS_STORE_COMMANDS_H_ @@ -56,16 +56,16 @@ /** Command Static Wrapper signature byte, for verification of valid CSW blocks. */ #define CSW_SIGNATURE 0x53425355UL - + /** Data direction mask for the Flags field of a CBW, indicating Host-to-Device transfer direction. */ #define COMMAND_DIRECTION_DATA_OUT (0 << 7) /** Data direction mask for the Flags field of a CBW, indicating Device-to-Host transfer direction. */ #define COMMAND_DIRECTION_DATA_IN (1 << 7) - + /** Timeout period between the issuing of a CBW to a device, and the reception of the first packet. */ #define COMMAND_DATA_TIMEOUT_MS 10000 - + /** Additional error code for Mass Storage functions when a device returns a logical command failure. */ #define MASS_STORE_SCSI_COMMAND_FAILED 0xC0 @@ -83,7 +83,7 @@ uint8_t SCSICommandLength; /**< Length of the SCSI command in the CBW */ uint8_t SCSICommandData[16]; /**< SCSI command to issue to the device */ } CommandBlockWrapper_t; - + /** Type define for a Mass Storage class Command Status Wrapper, used to wrap SCSI * responses for transport over the USB bulk endpoints from the device. */ @@ -94,7 +94,7 @@ uint32_t DataTransferResidue; /**< Length of data not transferred */ uint8_t Status; /**< Command status, a value from the MassStorageHost_CommandStatusCodes_t enum */ } CommandStatusWrapper_t; - + /** Type define for a SCSI Sense structure. Structures of this type are filled out by the * device via the \ref MassStore_RequestSense() function, indicating the current sense data of the * device (giving explicit error codes for the last issued command). For details of the @@ -105,13 +105,13 @@ uint8_t ResponseCode; uint8_t SegmentNumber; - + unsigned char SenseKey : 4; unsigned char Reserved : 1; unsigned char ILI : 1; unsigned char EOM : 1; unsigned char FileMark : 1; - + uint8_t Information[4]; uint8_t AdditionalLength; uint8_t CmdSpecificInformation[4]; @@ -129,12 +129,12 @@ { unsigned char DeviceType : 5; unsigned char PeripheralQualifier : 3; - + unsigned char Reserved : 7; unsigned char Removable : 1; - + uint8_t Version; - + unsigned char ResponseDataFormat : 4; unsigned char Reserved2 : 1; unsigned char NormACA : 1; @@ -152,12 +152,12 @@ unsigned char WideBus16Bit : 1; unsigned char WideBus32Bit : 1; unsigned char RelAddr : 1; - + uint8_t VendorID[8]; uint8_t ProductID[16]; uint8_t RevisionID[4]; } SCSI_Inquiry_Response_t; - + /** SCSI capacity structure, to hold the total capacity of the device in both the number * of blocks in the current LUN, and the size of each block. This structure is filled by * the device when the \ref MassStore_ReadCapacity() function is called. @@ -176,7 +176,7 @@ Command_Fail = 1, /**< Command failed to complete successfully */ Phase_Error = 2 /**< Phase error while processing the issued command */ }; - + /* Function Prototypes: */ #if defined(INCLUDE_FROM_MASSSTORE_COMMANDS_C) static uint8_t MassStore_SendCommand(CommandBlockWrapper_t* const SCSICommandBlock, @@ -186,7 +186,7 @@ void* BufferPtr) ATTR_NON_NULL_PTR_ARG(1); static uint8_t MassStore_GetReturnedStatus(CommandStatusWrapper_t* const SCSICommandStatus) ATTR_NON_NULL_PTR_ARG(1); #endif - + uint8_t MassStore_MassStorageReset(void); uint8_t MassStore_GetMaxLUN(uint8_t* const MaxLUNIndex); uint8_t MassStore_RequestSense(const uint8_t LUNIndex, @@ -210,3 +210,4 @@ const bool PreventRemoval); #endif + diff --git a/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h b/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h index a69aa56fe..6bcd5780f 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h +++ b/Demos/Host/LowLevel/MassStorageHost/Lib/SCSI_Codes.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * the SCSI standard documentation for more information on each SCSI command and * the SENSE data. */ - + #ifndef _SCSI_CODES_H_ #define _SCSI_CODES_H_ @@ -84,3 +84,4 @@ #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07 #endif + diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c index 985aeeb08..93c62e74f 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -124,7 +124,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -139,7 +139,7 @@ void MassStorage_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -149,7 +149,7 @@ void MassStorage_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -171,7 +171,7 @@ void MassStorage_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Mass Storage Disk Enumerated.\r\n")); USB_HostState = HOST_STATE_Configured; @@ -179,28 +179,28 @@ void MassStorage_Task(void) case HOST_STATE_Configured: /* Indicate device busy via the status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - + /* Send the request, display error and wait for device detach if request fails */ if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful) - { + { ShowDiskReadError(PSTR("Get Max LUN"), ErrorCode); USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Print number of LUNs detected in the attached device */ printf_P(PSTR("Total LUNs: %d - Using first LUN in device.\r\n"), (MassStore_MaxLUNIndex + 1)); - + /* Reset the Mass Storage device interface, ready for use */ if ((ErrorCode = MassStore_MassStorageReset()) != HOST_SENDCONTROL_Successful) { ShowDiskReadError(PSTR("Mass Storage Reset"), ErrorCode); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Get sense data from the device - many devices will not accept any other commands until the sense data * is read - both on start-up and after a failed command */ SCSI_Request_Sense_Response_t SenseData; @@ -210,12 +210,12 @@ void MassStorage_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the prevent removal flag for the device, allowing it to be accessed */ if ((ErrorCode = MassStore_PreventAllowMediumRemoval(0, true)) != 0) { ShowDiskReadError(PSTR("Prevent/Allow Medium Removal"), ErrorCode); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } @@ -225,14 +225,14 @@ void MassStorage_Task(void) if ((ErrorCode = MassStore_Inquiry(0, &InquiryData)) != 0) { ShowDiskReadError(PSTR("Inquiry"), ErrorCode); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } /* Print vendor and product names of attached device */ printf_P(PSTR("Vendor \"%.8s\", Product \"%.16s\"\r\n"), InquiryData.VendorID, InquiryData.ProductID); - + /* Wait until disk ready */ puts_P(PSTR("Waiting until ready..")); @@ -246,7 +246,7 @@ void MassStorage_Task(void) /* Check to see if the attached device is ready for new commands */ ErrorCode = MassStore_TestUnitReady(0); - + /* If attached device is ready, abort the loop */ if (!(ErrorCode)) break; @@ -270,11 +270,11 @@ void MassStorage_Task(void) if ((ErrorCode = MassStore_ReadCapacity(0, &DiskCapacity)) != 0) { ShowDiskReadError(PSTR("Read Capacity"), ErrorCode); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Display the disk capacity in blocks * block size bytes */ printf_P(PSTR("%lu blocks of %lu bytes.\r\n"), DiskCapacity.Blocks, DiskCapacity.BlockSize); @@ -285,11 +285,11 @@ void MassStorage_Task(void) if ((ErrorCode = MassStore_ReadDeviceBlock(0, 0x00000000, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0) { ShowDiskReadError(PSTR("Read Device Block"), ErrorCode); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("\r\nContents of first block:\r\n")); /* Print out the first block in both HEX and ASCII, 16 bytes per line */ @@ -297,30 +297,30 @@ void MassStorage_Task(void) { /* Pointer to the start of the current 16-byte chunk in the read block of data */ uint8_t* ChunkPtr = &BlockBuffer[Chunk << 4]; - + /* Print out the 16 bytes of the chunk in HEX format */ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++) { char CurrByte = *(ChunkPtr + ByteOffset); - + printf_P(PSTR("%.2X "), CurrByte); } - + puts_P(PSTR(" ")); /* Print out the 16 bytes of the chunk in ASCII format */ for (uint8_t ByteOffset = 0; ByteOffset < (1 << 4); ByteOffset++) { char CurrByte = *(ChunkPtr + ByteOffset); - + putchar(isprint(CurrByte) ? CurrByte : '.'); } - + puts_P(PSTR("\r\n")); } - + puts_P(PSTR("\r\n\r\nPress board button to read entire ASCII contents of disk...\r\n\r\n")); - + /* Wait for the board button to be pressed */ while (!(Buttons_GetStatus() & BUTTONS_BUTTON1)) { @@ -332,7 +332,7 @@ void MassStorage_Task(void) /* Abort if device removed */ if (USB_HostState == HOST_STATE_Unattached) break; - + /* Print out the entire disk contents in ASCII format */ for (uint32_t CurrBlockAddress = 0; CurrBlockAddress < DiskCapacity.Blocks; CurrBlockAddress++) { @@ -340,7 +340,7 @@ void MassStorage_Task(void) if ((ErrorCode = MassStore_ReadDeviceBlock(0, CurrBlockAddress, 1, DiskCapacity.BlockSize, BlockBuffer)) != 0) { ShowDiskReadError(PSTR("Read Device Block"), ErrorCode); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } @@ -349,7 +349,7 @@ void MassStorage_Task(void) for (uint16_t Byte = 0; Byte < DiskCapacity.BlockSize; Byte++) { char CurrByte = BlockBuffer[Byte]; - + putchar(isprint(CurrByte) ? CurrByte : '.'); } @@ -357,10 +357,10 @@ void MassStorage_Task(void) if (USB_HostState == HOST_STATE_Unattached) break; } - + /* Indicate device no longer busy */ LEDs_SetAllLEDs(LEDMASK_USB_READY); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; @@ -386,7 +386,7 @@ void ShowDiskReadError(char* CommandString, { /* Display the error code */ printf_P(PSTR(ESC_FG_RED "Command error (%S).\r\n"), CommandString); - printf_P(PSTR(" -- Error Code: %d" ESC_FG_WHITE), ErrorCode); + printf_P(PSTR(" -- Error Code: %d" ESC_FG_WHITE), ErrorCode); } Pipe_Freeze(); @@ -394,3 +394,4 @@ void ShowDiskReadError(char* CommandString, /* Indicate device error via the status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h index 7aabe9f7d..ef937b7be 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for MassStoreHost.c. */ - + #ifndef _MASS_STORE_HOST_H_ #define _MASS_STORE_HOST_H_ @@ -72,11 +72,11 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Function Prototypes: */ void MassStorage_Task(void); void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -88,3 +88,4 @@ const uint8_t ErrorCode); #endif + diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt index 23f083dea..45d78c43b 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mass Storage Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Mass Storage Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bulk Only</td> * </tr> @@ -42,12 +42,12 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mass Storage host demonstration application. This gives a simple reference * application for implementing a USB Mass Storage host, for USB storage devices * using the standard Mass Storage USB profile. - * + * * The first 512 bytes (boot sector) of an attached disk's memory will be dumped * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287 * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents @@ -65,3 +65,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/MassStorageHost/makefile b/Demos/Host/LowLevel/MassStorageHost/makefile index 15db4bd67..7d8352351 100644 --- a/Demos/Host/LowLevel/MassStorageHost/makefile +++ b/Demos/Host/LowLevel/MassStorageHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -136,7 +136,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -149,7 +149,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -263,7 +263,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -276,7 +276,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -288,7 +288,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -300,7 +300,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -323,7 +323,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -357,7 +357,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -391,7 +391,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -420,7 +420,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -439,10 +439,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -507,11 +507,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -538,9 +538,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -638,14 +638,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -667,7 +667,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -711,3 +711,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c index b5d62236e..83e0c5338 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; @@ -88,7 +88,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -96,12 +96,12 @@ uint8_t ProcessConfigurationDescriptor(void) if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) DataINEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); Pipe_SetInterruptPeriod(DataINEndpoint->PollingIntervalMS); - + /* Valid data found, return success */ return SuccessfulConfigRead; } @@ -127,7 +127,7 @@ uint8_t DComp_NextMouseInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + /* Current descriptor does not match what this comparator is looking for */ return DESCRIPTOR_SEARCH_NotFound; } @@ -162,3 +162,4 @@ uint8_t DComp_NextMouseInterfaceDataEndpoint(void* CurrentDescriptor) /* Current descriptor does not match what this comparator is looking for */ return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h index 71fbadedd..57d71e692 100644 --- a/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,19 +38,19 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "MouseHost.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define MOUSE_CLASS 0x03 /** Interface Protocol value for a Boot Protocol Mouse compliant device. */ #define MOUSE_PROTOCOL 0x02 - + /** Pipe number for the mouse data IN pipe. */ #define MOUSE_DATA_IN_PIPE 1 - + /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ enum MouseHost_GetConfigDescriptorDataCodes_t @@ -69,3 +69,4 @@ uint8_t DComp_NextMouseInterfaceDataEndpoint(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.c b/Demos/Host/LowLevel/MouseHost/MouseHost.c index 05efa25c5..a7bda5ae5 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.c +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MouseHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MouseHost.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -64,7 +64,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ SerialStream_Init(9600, false); LEDs_Init(); @@ -132,7 +132,7 @@ void ReadNextReport(void) uint8_t LEDMask = LEDS_NO_LEDS; /* Select mouse data pipe */ - Pipe_SelectPipe(MOUSE_DATA_IN_PIPE); + Pipe_SelectPipe(MOUSE_DATA_IN_PIPE); /* Unfreeze keyboard data pipe */ Pipe_Unfreeze(); @@ -142,10 +142,10 @@ void ReadNextReport(void) { /* No packet received (no movement), turn off LEDs */ LEDs_SetAllLEDs(LEDS_NO_LEDS); - + /* Refreeze HID data IN pipe */ Pipe_Freeze(); - + return; } @@ -153,14 +153,14 @@ void ReadNextReport(void) if (Pipe_IsReadWriteAllowed()) { /* Read in mouse report data */ - Pipe_Read_Stream_LE(&MouseReport, sizeof(MouseReport)); + Pipe_Read_Stream_LE(&MouseReport, sizeof(MouseReport)); /* Alter status LEDs according to mouse X movement */ if (MouseReport.X > 0) LEDMask |= LEDS_LED1; else if (MouseReport.X < 0) LEDMask |= LEDS_LED2; - + /* Alter status LEDs according to mouse Y movement */ if (MouseReport.Y > 0) LEDMask |= LEDS_LED3; @@ -170,9 +170,9 @@ void ReadNextReport(void) /* Alter status LEDs according to mouse button position */ if (MouseReport.Button) LEDMask = LEDS_ALL_LEDS; - + LEDs_SetAllLEDs(LEDMask); - + /* Print mouse report data through the serial port */ printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X, MouseReport.Y, @@ -198,7 +198,7 @@ void Mouse_HID_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -208,7 +208,7 @@ void Mouse_HID_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -225,12 +225,12 @@ void Mouse_HID_Task(void) /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* HID class request to set the mouse protocol to the Boot Protocol */ USB_ControlRequest = (USB_Request_Header_t) { @@ -252,7 +252,7 @@ void Mouse_HID_Task(void) /* Indicate error status */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; @@ -269,3 +269,4 @@ void Mouse_HID_Task(void) break; } } + diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.h b/Demos/Host/LowLevel/MouseHost/MouseHost.h index 8947436e6..dc75013f8 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.h +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,9 +49,9 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "ConfigDescriptor.h" - + /* Macros: */ /** HID Class Specific request to set the report protocol mode. */ #define REQ_SetProtocol 0x0B @@ -76,11 +76,11 @@ int8_t X; /**< Current delta X movement of the mouse */ int8_t Y; /**< Current delta Y movement on the mouse */ } USB_MouseReport_Data_t; - + /* Function Prototypes: */ void Mouse_HID_Task(void); void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -89,5 +89,6 @@ void EVENT_USB_Host_DeviceEnumerationComplete(void); void ReadNextReport(void); - + #endif + diff --git a/Demos/Host/LowLevel/MouseHost/MouseHost.txt b/Demos/Host/LowLevel/MouseHost/MouseHost.txt index be608db2f..b659abada 100644 --- a/Demos/Host/LowLevel/MouseHost/MouseHost.txt +++ b/Demos/Host/LowLevel/MouseHost/MouseHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,23 +41,23 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse host demonstration application. This gives a simple reference * application for implementing a USB Mouse host, for USB mice using * the standard mouse HID profile. - * + * * Mouse movement and button presses are displayed on the board LEDs, * as well as printed out the serial terminal as formatted dY, dY and * button status information. - * + * * This uses a naive method where the mouse is set to Boot Protocol mode, so * that the report structure is fixed and known. A better implementation * uses the HID report parser for correct report data processing across * all compatible mice with advanced characteristics, as shown in the * MouseHostWithParser demo application. - * - * Currently only single interface mice are supported. + * + * Currently only single interface mice are supported. * * \section SSec_Options Project Options * @@ -71,3 +71,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/MouseHost/makefile b/Demos/Host/LowLevel/MouseHost/makefile index 1369db77d..d35b1da5c 100644 --- a/Demos/Host/LowLevel/MouseHost/makefile +++ b/Demos/Host/LowLevel/MouseHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -134,7 +134,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -147,7 +147,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -298,7 +298,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -321,7 +321,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -418,7 +418,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -505,11 +505,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -636,14 +636,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c index dc8ada879..7a1a6faaa 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* HIDInterface = NULL; USB_Descriptor_HID_t* HIDDescriptor = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; @@ -67,7 +67,7 @@ uint8_t ProcessConfigurationDescriptor(void) default: return ControlError; } - + while (!(DataINEndpoint)) { /* See if we've found a likely compatible interface, and if there is an endpoint within that interface */ @@ -82,7 +82,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the interface in case we need to refer back to it later */ HIDInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); @@ -93,14 +93,14 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the HID descriptor for later use */ - HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); - + HIDDescriptor = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_HID_t); + /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -108,7 +108,7 @@ uint8_t ProcessConfigurationDescriptor(void) if (EndpointData->EndpointAddress & ENDPOINT_DESCRIPTOR_DIR_IN) DataINEndpoint = EndpointData; } - + /* Configure the HID data IN pipe */ Pipe_ConfigurePipe(MOUSE_DATA_IN_PIPE, EP_TYPE_INTERRUPT, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -140,7 +140,7 @@ uint8_t DComp_NextMouseInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -181,5 +181,6 @@ uint8_t DComp_NextHID(void* CurrentDescriptor) if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_HID) return DESCRIPTOR_SEARCH_Found; else - return DESCRIPTOR_SEARCH_NotFound; + return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h index b2a2e3890..504bc0b76 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,16 +38,16 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "HIDReport.h" - + /* Macros: */ /** Interface Class value for the Human Interface Device class. */ #define MOUSE_CLASS 0x03 /** Interface Protocol value for a Boot Protocol Mouse compliant device. */ #define MOUSE_PROTOCOL 0x02 - + /** Descriptor header type constant for a HID descriptor. */ #define DTYPE_HID 0x21 @@ -56,7 +56,7 @@ /** Pipe number for the mouse report data pipe. */ #define MOUSE_DATA_IN_PIPE 1 - + /* Enums: */ /** Enum for the possible return codes of the \ref ProcessConfigurationDescriptor() function. */ enum MouseHostWithParser_GetConfigDescriptorDataCodes_t @@ -76,3 +76,4 @@ uint8_t DComp_NextHID(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c b/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c index 327ae45ec..18799c27f 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c +++ b/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -46,7 +46,7 @@ uint8_t GetHIDReportData(void) { /* Create a buffer big enough to hold the entire returned HID report */ uint8_t HIDReportData[HIDReportSize]; - + USB_ControlRequest = (USB_Request_Header_t) { .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE), @@ -66,7 +66,7 @@ uint8_t GetHIDReportData(void) /* Send the HID report to the parser for processing */ if (USB_ProcessHIDReport(HIDReportData, HIDReportSize, &HIDReportInfo) != HID_PARSE_Successful) return ParseError; - + return ParseSuccessful; } @@ -100,7 +100,7 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) /* If a collection with the mouse usage was not found, indicate that we are not interested in this item */ if (!IsMouse) return false; - + /* Check the attributes of the current mouse item - see if we are interested in it or not; * only store BUTTON and GENERIC_DESKTOP_CONTROL items into the Processed HID Report * structure to save RAM and ignore the rest @@ -108,3 +108,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem) return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) || (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL)); } + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h b/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h index bd12a39c1..19cfd753c 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/HIDReport.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -39,7 +39,7 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Host/HIDParser.h> - + #include "MouseHostWithParser.h" /* Macros: */ @@ -60,7 +60,7 @@ /** HID Report Descriptor Usage value for a Scroll Wheel movement. */ #define USAGE_SCROLL_WHEEL 0x38 - + /* Enums: */ /** Enum for the possible return codes of the \ref GetHIDReportData() function. */ enum MouseHostWithParser_GetHIDReportDataCodes_t @@ -69,16 +69,16 @@ ParseError = 1, /**< Failed to fully process the HID report descriptor */ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */ }; - + /* Type Defines: */ /** Type define for a HID descriptor. */ typedef struct { USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length */ - + uint16_t HIDSpec; /**< Implemented HID class specification, in BCD encoded format */ uint8_t CountryCode; /**< Country code value for localized hardware */ - + uint8_t TotalHIDDescriptors; /**< Total number of HID report descriptors in the current interface */ uint8_t HIDReportType; /**< HID report type of the first HID report descriptor */ @@ -91,7 +91,8 @@ /* Function Prototypes: */ uint8_t GetHIDReportData(void); - + bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem); - + #endif + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c index a0240b04a..185871d4a 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the MouseHostWithParser demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "MouseHostWithParser.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -64,7 +64,7 @@ void SetupHardware(void) /* Disable clock division */ clock_prescale_set(clock_div_1); - + /* Hardware Initialization */ SerialStream_Init(9600, false); LEDs_Init(); @@ -119,7 +119,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -135,7 +135,7 @@ void Mouse_HID_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -145,7 +145,7 @@ void Mouse_HID_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -153,7 +153,7 @@ void Mouse_HID_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -162,12 +162,12 @@ void Mouse_HID_Task(void) /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Processing HID Report (Size %d Bytes).\r\n"), HIDReportSize); /* Get and process the device's first HID report descriptor */ @@ -179,21 +179,21 @@ void Mouse_HID_Task(void) puts_P(PSTR("Not a valid Mouse." ESC_FG_WHITE)); else printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); - + /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf("Total Reports: %d\r\n", HIDReportInfo.TotalDeviceReports); for (uint8_t i = 0; i < HIDReportInfo.TotalDeviceReports; i++) { HID_ReportSizeInfo_t* CurrReportIDInfo = &HIDReportInfo.ReportIDSizes[i]; - + uint8_t ReportSizeInBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_In]; uint8_t ReportSizeOutBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Out]; uint8_t ReportSizeFeatureBits = CurrReportIDInfo->ReportSizeBits[HID_REPORT_ITEM_Feature]; @@ -212,9 +212,9 @@ void Mouse_HID_Task(void) break; case HOST_STATE_Configured: /* Select and unfreeze mouse data pipe */ - Pipe_SelectPipe(MOUSE_DATA_IN_PIPE); + Pipe_SelectPipe(MOUSE_DATA_IN_PIPE); Pipe_Unfreeze(); - + /* Check to see if a packet has been received */ if (Pipe_IsINReceived()) { @@ -226,11 +226,11 @@ void Mouse_HID_Task(void) /* Load in the mouse report */ Pipe_Read_Stream_LE(MouseReport, Pipe_BytesInPipe()); - + /* Process the read in mouse report from the device */ ProcessMouseReport(MouseReport); } - + /* Clear the IN endpoint, ready for next data packet */ Pipe_ClearIN(); } @@ -255,7 +255,7 @@ void ProcessMouseReport(uint8_t* MouseReport) { /* Create a temporary item pointer to the next report item */ HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber]; - + bool FoundData; if ((ReportItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) && @@ -263,7 +263,7 @@ void ProcessMouseReport(uint8_t* MouseReport) { /* Get the mouse button value */ FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem); - + /* For multi-report devices - if the requested data was not in the issued report, continue */ if (!(FoundData)) continue; @@ -276,14 +276,14 @@ void ProcessMouseReport(uint8_t* MouseReport) (ReportItem->Attributes.Usage.Usage == USAGE_SCROLL_WHEEL) && (ReportItem->ItemType == HID_REPORT_ITEM_In)) { - /* Get the mouse wheel value if it is contained within the current + /* Get the mouse wheel value if it is contained within the current * report, if not, skip to the next item in the parser list */ if (!(USB_GetHIDReportItemInfo(MouseReport, ReportItem))) - continue; + continue; int16_t WheelDelta = HID_ALIGN_DATA(ReportItem, int16_t); - + if (WheelDelta) LEDMask = (LEDS_LED1 | LEDS_LED2 | ((WheelDelta > 0) ? LEDS_LED3 : LEDS_LED4)); } @@ -294,13 +294,13 @@ void ProcessMouseReport(uint8_t* MouseReport) { /* Get the mouse relative position value */ FoundData = USB_GetHIDReportItemInfo(MouseReport, ReportItem); - + /* For multi-report devices - if the requested data was not in the issued report, continue */ if (!(FoundData)) continue; - + int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t); - + /* Check to see if a (non-zero) delta movement has been indicated */ if (DeltaMovement) { @@ -312,7 +312,7 @@ void ProcessMouseReport(uint8_t* MouseReport) } } } - + /* Display the button information on the board LEDs */ LEDs_SetAllLEDs(LEDMask); -}
\ No newline at end of file +} diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h index a51b7a25d..4e492f61c 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,7 +49,7 @@ #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> - + #include "ConfigDescriptor.h" #include "HIDReport.h" @@ -69,7 +69,7 @@ /* Function Prototypes: */ void Mouse_HID_Task(void); void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -80,3 +80,4 @@ void ProcessMouseReport(uint8_t* MouseReport); #endif + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt index febd4a939..fdcdb6153 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt +++ b/Demos/Host/LowLevel/MouseHostWithParser/MouseHostWithParser.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Mouse Host With HID Descriptor Parser Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Human Interface Device (HID)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -41,19 +41,19 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Mouse host demonstration application. This gives a simple reference * application for implementing a USB Mouse host, for USB mice using * the standard mouse HID profile. It uses a HID parser for the HID * reports, allowing for correct operation across all USB mice. This * demo supports mice with a single HID report. - * + * * Mouse and scroll wheel movement and button presses are displayed * on the board LEDs. On connection to a USB mouse, the report items * will be processed and printed as a formatted list through the USART * before the mouse is fully enumerated. - * + * * Currently only single interface mice are supported. * * \section SSec_Options Project Options @@ -68,3 +68,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/MouseHostWithParser/makefile b/Demos/Host/LowLevel/MouseHostWithParser/makefile index cd1907272..9ea09fa0c 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/makefile +++ b/Demos/Host/LowLevel/MouseHostWithParser/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c index 89bf488be..b269820e4 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,7 +49,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* PrinterInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -66,7 +66,7 @@ uint8_t ProcessConfigurationDescriptor(void) default: return ControlError; } - + while (!(DataINEndpoint) || !(DataOUTEndpoint)) { /* See if we've found a likely compatible interface, and if there is an endpoint within that interface */ @@ -81,7 +81,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; } - + /* Save the interface in case we need to refer back to it later */ PrinterInterface = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Interface_t); @@ -92,7 +92,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -102,10 +102,10 @@ uint8_t ProcessConfigurationDescriptor(void) else DataOUTEndpoint = EndpointData; } - + /* Save Printer interface details for later use */ PrinterInterfaceNumber = PrinterInterface->InterfaceNumber; - PrinterAltSetting = PrinterInterface->AlternateSetting; + PrinterAltSetting = PrinterInterface->AlternateSetting; /* Configure the Printer data IN pipe */ Pipe_ConfigurePipe(PRINTER_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, @@ -140,7 +140,7 @@ uint8_t DComp_NextBidirectionalPrinterInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -171,3 +171,4 @@ uint8_t DComp_NextPrinterInterfaceBulkDataEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h index b0cd56b19..b25f3bdc7 100644 --- a/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/PrinterHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,10 +33,10 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "PrinterHost.h" #include "Lib/PrinterCommands.h" - + /* Macros: */ /** Interface Class value for the Printer Device class. */ #define PRINTER_CLASS 0x07 @@ -63,22 +63,23 @@ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ }; - + /* External Variables: */ /** Interface index of the Bidirectional Printer interface within the device, once the Configuration * Descriptor has been processed. */ uint8_t PrinterInterfaceNumber; - + /** Interface Alternate Setting index of the Bidirectional Printer interface within the device, once * the Configuration Descriptor has been processed. */ uint8_t PrinterAltSetting; /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); + uint8_t ProcessConfigurationDescriptor(void); uint8_t DComp_NextBidirectionalPrinterInterface(void* CurrentDescriptor); uint8_t DComp_NextPrinterInterfaceBulkDataEndpoint(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c b/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c index 0b75d7507..da79e03cc 100644 --- a/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c +++ b/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -51,14 +51,14 @@ uint8_t Printer_SendData(const void* const PrinterCommands, Pipe_SelectPipe(PRINTER_DATA_OUT_PIPE); Pipe_Unfreeze(); - + if ((ErrorCode = Pipe_Write_Stream_LE(PrinterCommands, CommandSize)) != PIPE_RWSTREAM_NoError) return ErrorCode; Pipe_ClearOUT(); - + Pipe_WaitUntilReady(); - + Pipe_Freeze(); return PIPE_RWSTREAM_NoError; @@ -86,33 +86,33 @@ uint8_t Printer_GetDeviceID(char* DeviceIDString, .wIndex = PrinterInterfaceNumber, .wLength = sizeof(DeviceIDStringLength), }; - + Pipe_SelectPipe(PIPE_CONTROLPIPE); if ((ErrorCode = USB_Host_SendControlRequest(&DeviceIDStringLength)) != HOST_SENDCONTROL_Successful) return ErrorCode; - + if (!(DeviceIDStringLength)) { DeviceIDString[0] = 0x00; return HOST_SENDCONTROL_Successful; } - + DeviceIDStringLength = SwapEndian_16(DeviceIDStringLength); if (DeviceIDStringLength > BufferSize) DeviceIDStringLength = BufferSize; USB_ControlRequest.wLength = DeviceIDStringLength; - + if ((ErrorCode = USB_Host_SendControlRequest(DeviceIDString)) != HOST_SENDCONTROL_Successful) return ErrorCode; - + /* Move string back two characters to remove the string length value from the start of the array */ memmove(&DeviceIDString[0], &DeviceIDString[2], DeviceIDStringLength - 2); DeviceIDString[DeviceIDStringLength - 2] = 0x00; - + return HOST_SENDCONTROL_Successful; } diff --git a/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h b/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h index 9cd768efa..812ff7e5a 100644 --- a/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h +++ b/Demos/Host/LowLevel/PrinterHost/Lib/PrinterCommands.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for PrinterCommands.c. */ - + #ifndef _PRINTER_COMMANDS_H_ #define _PRINTER_COMMANDS_H_ @@ -41,7 +41,7 @@ #include <string.h> #include <LUFA/Drivers/USB/USB.h> - + #include "../PrinterHost.h" /* Macros: */ @@ -53,7 +53,7 @@ /** Printer class-specific request to soft-reset the device. */ #define REQ_SoftReset 2 - + /* Function Prototypes: */ uint8_t Printer_SendData(const void* const PrinterCommands, const uint16_t CommandSize); @@ -61,5 +61,6 @@ const uint16_t BufferSize); uint8_t Printer_GetPortStatus(uint8_t* const PortStatus); uint8_t Printer_SoftReset(void); - + #endif + diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c index f12c95ef9..88a1a8c43 100644 --- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.c +++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -47,7 +47,7 @@ int main(void) puts_P(PSTR(ESC_FG_CYAN "Printer Host Demo running.\r\n" ESC_FG_WHITE)); sei(); - + for (;;) { USB_Printer_Host(); @@ -134,10 +134,10 @@ void USB_Printer_Host(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Select the control pipe for the request transfer */ - Pipe_SelectPipe(PIPE_CONTROLPIPE); - + Pipe_SelectPipe(PIPE_CONTROLPIPE); + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -147,7 +147,7 @@ void USB_Printer_Host(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n"), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -155,7 +155,7 @@ void USB_Printer_Host(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -169,7 +169,7 @@ void USB_Printer_Host(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Some printers use alternate settings to determine the communication protocol used - if so, send a SetInterface * request to switch to the interface alternate setting with the Bidirectional protocol */ if (PrinterAltSetting) @@ -182,7 +182,7 @@ void USB_Printer_Host(void) .wIndex = PrinterInterfaceNumber, .wLength = 0, }; - + if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful) { printf_P(PSTR(ESC_FG_RED "Control Error (Set Interface).\r\n" @@ -193,12 +193,12 @@ void USB_Printer_Host(void) /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } } - + puts_P(PSTR("Retrieving Device ID...\r\n")); - + char DeviceIDString[300]; if ((ErrorCode = Printer_GetDeviceID(DeviceIDString, sizeof(DeviceIDString))) != HOST_SENDCONTROL_Successful) { @@ -222,10 +222,10 @@ void USB_Printer_Host(void) case HOST_STATE_Configured: /* Indicate device busy via the status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - + char TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X"; uint16_t TestPageLength = strlen(TestPageData); - + printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength); if ((ErrorCode = Printer_SendData(&TestPageData, TestPageLength)) != PIPE_RWSTREAM_NoError) @@ -242,7 +242,7 @@ void USB_Printer_Host(void) } puts_P(PSTR("Test Page Sent.\r\n")); - + /* Indicate device no longer busy */ LEDs_SetAllLEDs(LEDMASK_USB_READY); @@ -250,3 +250,4 @@ void USB_Printer_Host(void) break; } } + diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.h b/Demos/Host/LowLevel/PrinterHost/PrinterHost.h index 2ba270f7d..1825d9f17 100644 --- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.h +++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for PrinterHost.c. */ - + #ifndef _MASS_STORE_HOST_H_ #define _MASS_STORE_HOST_H_ @@ -66,13 +66,13 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* External Variables: */ extern uint8_t PrinterInterfaceNumber; - + /* Function Prototypes: */ void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -86,3 +86,4 @@ void USB_Printer_Host(void); #endif + diff --git a/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt b/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt index 92d43310b..e6b810dbc 100644 --- a/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt +++ b/Demos/Host/LowLevel/PrinterHost/PrinterHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Printer Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Printer Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Bidirectional Protocol</td> * </tr> @@ -38,16 +38,16 @@ * Full Speed Mode</td> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Printer host demonstration application. This gives a simple reference * application for implementing a USB Printer host, for USB printers using * the bidirectional data encapsulation protocol and PCL language. - * + * * Upon connection of a compatible printer, the printer's device ID is sent * to the AVR's serial port, and a simple test page is printed using the PCL * printer language. - * + * * \section SSec_Options Project Options * * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. @@ -60,3 +60,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/PrinterHost/makefile b/Demos/Host/LowLevel/PrinterHost/makefile index b8c162522..f64184ba0 100644 --- a/Demos/Host/LowLevel/PrinterHost/makefile +++ b/Demos/Host/LowLevel/PrinterHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c index 58e1408c1..1190d28b7 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * needed to communication with an attached USB device. Descriptors are special computer-readable structures * which the host requests upon device enumeration, to determine the device's capabilities and functions. */ - + #include "ConfigDescriptor.h" /** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* RNDISControlInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -85,7 +85,7 @@ uint8_t ProcessConfigurationDescriptor(void) { /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; - } + } /* Clear any found endpoints */ DataINEndpoint = NULL; @@ -111,7 +111,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -129,7 +129,7 @@ uint8_t ProcessConfigurationDescriptor(void) DataOUTEndpoint = EndpointData; } } - + /* Configure the RNDIS data IN pipe */ Pipe_ConfigurePipe(RNDIS_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -167,7 +167,7 @@ uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -191,7 +191,7 @@ uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -211,7 +211,7 @@ uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor) { uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK); - + if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT)) return DESCRIPTOR_SEARCH_Found; } @@ -222,3 +222,4 @@ uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h index 834493742..b4a056f85 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "RNDISEthernetHost.h" - + /* Macros: */ /** Interface Class value for the CDC class. */ #define CDC_CONTROL_CLASS 0x02 @@ -50,7 +50,7 @@ /** Interface Class value for the CDC RNDIS vendor specific protocol. */ #define CDC_CONTROL_PROTOCOL 0xFF - + /** Interface Class value for the CDC data class. */ #define CDC_DATA_CLASS 0x0A @@ -59,7 +59,7 @@ /** Interface Class value for the CDC data protocol. */ #define CDC_DATA_PROTOCOL 0x00 - + /** Pipe number for the RNDIS data IN pipe. */ #define RNDIS_DATA_IN_PIPE 1 @@ -81,10 +81,11 @@ }; /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); - + uint8_t ProcessConfigurationDescriptor(void); + uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor); uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor); uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor); - + #endif + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c index 64cfc3ce6..661762b8b 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -83,7 +83,7 @@ uint8_t RNDIS_GetEncapsulatedResponse(void* const Buffer, .wIndex = 0, .wLength = Length, }; - + /* Select the control pipe for the request transfer */ Pipe_SelectPipe(PIPE_CONTROLPIPE); @@ -102,7 +102,7 @@ uint8_t RNDIS_SendKeepAlive(void) RNDIS_KeepAlive_Message_t KeepAliveMessage; RNDIS_KeepAlive_Complete_t KeepAliveMessageResponse; - + KeepAliveMessage.MessageType = REMOTE_NDIS_KEEPALIVE_MSG; KeepAliveMessage.MessageLength = sizeof(RNDIS_KeepAlive_Message_t); KeepAliveMessage.RequestId = RequestID++; @@ -112,13 +112,13 @@ uint8_t RNDIS_SendKeepAlive(void) { return ErrorCode; } - + if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&KeepAliveMessageResponse, sizeof(RNDIS_KeepAlive_Complete_t))) != HOST_SENDCONTROL_Successful) { return ErrorCode; } - + return HOST_SENDCONTROL_Successful; } @@ -145,13 +145,13 @@ uint8_t RNDIS_InitializeDevice(const uint16_t HostMaxPacketSize, InitMessage.MajorVersion = REMOTE_NDIS_VERSION_MAJOR; InitMessage.MinorVersion = REMOTE_NDIS_VERSION_MINOR; InitMessage.MaxTransferSize = HostMaxPacketSize; - + if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&InitMessage, sizeof(RNDIS_Initialize_Message_t))) != HOST_SENDCONTROL_Successful) { return ErrorCode; } - + if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&InitMessageResponse, sizeof(RNDIS_Initialize_Complete_t))) != HOST_SENDCONTROL_Successful) { @@ -160,9 +160,9 @@ uint8_t RNDIS_InitializeDevice(const uint16_t HostMaxPacketSize, if (InitMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS) return RNDIS_COMMAND_FAILED; - + *DeviceMaxPacketSize = InitMessageResponse.MaxTransferSize; - + return HOST_SENDCONTROL_Successful; } @@ -186,18 +186,18 @@ uint8_t RNDIS_SetRNDISProperty(const uint32_t Oid, RNDIS_Set_Message_t SetMessage; uint8_t ContiguousBuffer[Length]; } SetMessageData; - + RNDIS_Set_Complete_t SetMessageResponse; - + SetMessageData.SetMessage.MessageType = REMOTE_NDIS_SET_MSG; SetMessageData.SetMessage.MessageLength = sizeof(RNDIS_Set_Message_t) + Length; SetMessageData.SetMessage.RequestId = RequestID++; - + SetMessageData.SetMessage.Oid = Oid; SetMessageData.SetMessage.InformationBufferLength = Length; SetMessageData.SetMessage.InformationBufferOffset = (sizeof(RNDIS_Set_Message_t) - sizeof(RNDIS_Message_Header_t)); SetMessageData.SetMessage.DeviceVcHandle = 0; - + memcpy(&SetMessageData.ContiguousBuffer, Buffer, Length); if ((ErrorCode = RNDIS_SendEncapsulatedCommand(&SetMessageData, @@ -205,7 +205,7 @@ uint8_t RNDIS_SetRNDISProperty(const uint32_t Oid, { return ErrorCode; } - + if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&SetMessageResponse, sizeof(RNDIS_Set_Complete_t))) != HOST_SENDCONTROL_Successful) { @@ -214,7 +214,7 @@ uint8_t RNDIS_SetRNDISProperty(const uint32_t Oid, if (SetMessageResponse.Status != REMOTE_NDIS_STATUS_SUCCESS) return RNDIS_COMMAND_FAILED; - + return HOST_SENDCONTROL_Successful; } @@ -244,7 +244,7 @@ uint8_t RNDIS_QueryRNDISProperty(const uint32_t Oid, QueryMessage.MessageType = REMOTE_NDIS_QUERY_MSG; QueryMessage.MessageLength = sizeof(RNDIS_Query_Message_t); QueryMessage.RequestId = RequestID++; - + QueryMessage.Oid = Oid; QueryMessage.InformationBufferLength = 0; QueryMessage.InformationBufferOffset = 0; @@ -255,7 +255,7 @@ uint8_t RNDIS_QueryRNDISProperty(const uint32_t Oid, { return ErrorCode; } - + if ((ErrorCode = RNDIS_GetEncapsulatedResponse(&QueryMessageResponseData, sizeof(QueryMessageResponseData))) != HOST_SENDCONTROL_Successful) { @@ -284,7 +284,7 @@ uint8_t RNDIS_GetPacketLength(uint16_t* const PacketLength) Pipe_SelectPipe(RNDIS_DATA_IN_PIPE); Pipe_SetPipeToken(PIPE_TOKEN_IN); Pipe_Unfreeze(); - + if (!(Pipe_IsReadWriteAllowed())) { *PacketLength = 0; @@ -293,17 +293,18 @@ uint8_t RNDIS_GetPacketLength(uint16_t* const PacketLength) } RNDIS_Packet_Message_t DeviceMessage; - + if ((ErrorCode = Pipe_Read_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t))) != PIPE_RWSTREAM_NoError) { return ErrorCode; } *PacketLength = (uint16_t)DeviceMessage.DataLength; - + Pipe_Discard_Stream(DeviceMessage.DataOffset - (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t))); - + Pipe_Freeze(); - + return PIPE_RWSTREAM_NoError; } + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h index 56b4946e6..f474c9bd8 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISCommands.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -40,9 +40,9 @@ #include <avr/io.h> #include <stdio.h> #include <string.h> - + #include <LUFA/Drivers/USB/USB.h> - + #include "RNDISConstants.h" #include "../RNDISEthernetHost.h" @@ -69,19 +69,19 @@ uint32_t VcHandle; uint32_t Reserved; } RNDIS_Packet_Message_t; - + /** Type define for a RNDIS Initialize command message. */ typedef struct { uint32_t MessageType; uint32_t MessageLength; uint32_t RequestId; - + uint32_t MajorVersion; uint32_t MinorVersion; uint32_t MaxTransferSize; } RNDIS_Initialize_Message_t; - + /** Type define for a RNDIS Initialize complete response message. */ typedef struct { @@ -89,7 +89,7 @@ uint32_t MessageLength; uint32_t RequestId; uint32_t Status; - + uint32_t MajorVersion; uint32_t MinorVersion; uint32_t DeviceFlags; @@ -100,7 +100,7 @@ uint32_t AFListOffset; uint32_t AFListSize; } RNDIS_Initialize_Complete_t; - + /** Type define for a RNDIS Keep-alive command message. */ typedef struct { @@ -127,14 +127,14 @@ uint32_t AddressingReset; } RNDIS_Reset_Complete_t; - + /** Type define for a RNDIS Set command message. */ typedef struct { uint32_t MessageType; uint32_t MessageLength; uint32_t RequestId; - + uint32_t Oid; uint32_t InformationBufferLength; uint32_t InformationBufferOffset; @@ -149,20 +149,20 @@ uint32_t RequestId; uint32_t Status; } RNDIS_Set_Complete_t; - + /** Type define for a RNDIS Query command message. */ typedef struct { uint32_t MessageType; uint32_t MessageLength; uint32_t RequestId; - + uint32_t Oid; uint32_t InformationBufferLength; uint32_t InformationBufferOffset; uint32_t DeviceVcHandle; } RNDIS_Query_Message_t; - + /** Type define for a RNDIS Query complete response message. */ typedef struct { @@ -170,7 +170,7 @@ uint32_t MessageLength; uint32_t RequestId; uint32_t Status; - + uint32_t InformationBufferLength; uint32_t InformationBufferOffset; } RNDIS_Query_Complete_t; @@ -187,7 +187,7 @@ /** Implemented RNDIS Version Minor. */ #define REMOTE_NDIS_VERSION_MINOR 0x00 - + /** Additional error code for RNDIS functions when a device returns a logical command failure. */ #define RNDIS_COMMAND_FAILED 0xC0 @@ -209,3 +209,4 @@ uint8_t RNDIS_GetPacketLength(uint16_t* const PacketLength); #endif + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISConstants.h b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISConstants.h index efe22b699..273fdb81e 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISConstants.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Lib/RNDISConstants.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * RNDIS specification related constants. For more information on these * constants, please refer to the Microsoft RNDIS specification. */ - + #ifndef _RNDIS_CONSTANTS_DEVICE_H_ #define _RNDIS_CONSTANTS_DEVICE_H_ @@ -52,19 +52,19 @@ #define REMOTE_NDIS_SET_CMPLT 0x80000005UL #define REMOTE_NDIS_RESET_CMPLT 0x80000006UL #define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008UL - + #define REMOTE_NDIS_STATUS_SUCCESS 0x00000000UL #define REMOTE_NDIS_STATUS_FAILURE 0xC0000001UL #define REMOTE_NDIS_STATUS_INVALID_DATA 0xC0010015UL #define REMOTE_NDIS_STATUS_NOT_SUPPORTED 0xC00000BBUL #define REMOTE_NDIS_STATUS_MEDIA_CONNECT 0x4001000BUL #define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT 0x4001000CUL - + #define REMOTE_NDIS_MEDIA_STATE_CONNECTED 0x00000000UL #define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED 0x00000001UL - + #define REMOTE_NDIS_MEDIUM_802_3 0x00000000UL - + #define REMOTE_NDIS_DF_CONNECTIONLESS 0x00000001UL #define REMOTE_NDIS_DF_CONNECTION_ORIENTED 0x00000002UL @@ -79,8 +79,8 @@ #define REMOTE_NDIS_PACKET_GROUP 0x00001000UL #define REMOTE_NDIS_PACKET_ALL_FUNCTIONAL 0x00002000UL #define REMOTE_NDIS_PACKET_FUNCTIONAL 0x00004000UL - #define REMOTE_NDIS_PACKET_MAC_FRAME 0x00008000UL - + #define REMOTE_NDIS_PACKET_MAC_FRAME 0x00008000UL + #define OID_GEN_SUPPORTED_LIST 0x00010101UL #define OID_GEN_HARDWARE_STATUS 0x00010102UL #define OID_GEN_MEDIA_SUPPORTED 0x00010103UL @@ -110,3 +110,4 @@ #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103UL #endif + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c index 1da5b4dbf..302eddb66 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c +++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the RNDISEthernetHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "RNDISEthernetHost.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -119,7 +119,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -133,13 +133,13 @@ void PrintIncomingPackets(void) if ((ErrorCode = RNDIS_GetPacketLength(&PacketLength)) != HOST_SENDCONTROL_Successful) { printf_P(PSTR(ESC_FG_RED "Packet Reception Error.\r\n" - " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); + " -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); return; } - + if (!(PacketLength)) return; - + Pipe_Unfreeze(); printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength); @@ -152,13 +152,13 @@ void PrintIncomingPackets(void) else { uint8_t PacketBuffer[PacketLength]; - + Pipe_Read_Stream_LE(&PacketBuffer, PacketLength); - + for (uint16_t i = 0; i < PacketLength; i++) printf("0x%02x ", PacketBuffer[i]); } - + Pipe_ClearIN(); Pipe_Freeze(); @@ -178,7 +178,7 @@ void RNDIS_Host_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -188,7 +188,7 @@ void RNDIS_Host_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -196,7 +196,7 @@ void RNDIS_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -210,7 +210,7 @@ void RNDIS_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + uint16_t DeviceMaxPacketSize; if ((ErrorCode = RNDIS_InitializeDevice(1024, &DeviceMaxPacketSize)) != HOST_SENDCONTROL_Successful) { @@ -222,11 +222,11 @@ void RNDIS_Host_Task(void) /* Wait until USB device disconnected */ USB_HostState = HOST_STATE_WaitForDeviceRemoval; - break; + break; } - + printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), DeviceMaxPacketSize); - + /* We set the default filter to only receive packets we would be interested in */ uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST | REMOTE_NDIS_PACKET_ALL_MULTICAST); if ((ErrorCode = RNDIS_SetRNDISProperty(OID_GEN_CURRENT_PACKET_FILTER, @@ -242,7 +242,7 @@ void RNDIS_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + uint32_t VendorID; if ((ErrorCode = RNDIS_QueryRNDISProperty(OID_GEN_VENDOR_ID, &VendorID, sizeof(VendorID))) != HOST_SENDCONTROL_Successful) @@ -257,16 +257,16 @@ void RNDIS_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + printf_P(PSTR("Device Vendor ID: 0x%08lX\r\n"), VendorID); - + puts_P(PSTR("RNDIS Device Enumerated.\r\n")); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: PrintIncomingPackets(); - + break; } } diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h index 08187f9fa..c52fe6b9c 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h +++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISEthernetHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,11 +49,11 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "Lib/RNDISCommands.h" #include "ConfigDescriptor.h" - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -66,7 +66,7 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 @@ -87,12 +87,13 @@ void SetupHardware(void); void PrintIncomingPackets(void); void RNDIS_Host_Task(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt index 9fec00bec..a989bc51a 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt +++ b/Demos/Host/LowLevel/RNDISEthernetHost/RNDISHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage RNDIS Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td> * </tr> @@ -39,12 +39,12 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * RNDIS host demonstration application. This gives a simple reference * application for implementing a RNDIS Ethernet host, for USB devices such as * modems. - * + * * This demo will enumerate an attached USB RNDIS device, print out its vendor ID * and any received packets in raw form through the serial USART. * @@ -60,3 +60,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/makefile b/Demos/Host/LowLevel/RNDISEthernetHost/makefile index b2faa5be5..d9821c6db 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/makefile +++ b/Demos/Host/LowLevel/RNDISEthernetHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c index d11dee038..2a00a7361 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* StillImageInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -113,7 +113,7 @@ uint8_t ProcessConfigurationDescriptor(void) DataOUTEndpoint = EndpointData; } } - + /* Configure the Still Image data IN pipe */ Pipe_ConfigurePipe(SIMAGE_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -151,7 +151,7 @@ uint8_t DComp_NextStillImageInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -170,7 +170,7 @@ uint8_t DComp_NextStillImageInterfaceDataEndpoint(void* CurrentDescriptor) { uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK); - + if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT)) return DESCRIPTOR_SEARCH_Found; } @@ -181,3 +181,4 @@ uint8_t DComp_NextStillImageInterfaceDataEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h index 929d658cd..bd31c6bf2 100644 --- a/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/StillImageHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "StillImageHost.h" - + /* Macros: */ /** Interface Class value for the Still Image Device class. */ #define SIMAGE_CLASS 0x06 @@ -50,7 +50,7 @@ /** Interface Class value for the Still Image Device protocol. */ #define SIMAGE_PROTOCOL 0x01 - + /** Pipe number of the Still Image data IN pipe. */ #define SIMAGE_DATA_IN_PIPE 1 @@ -70,7 +70,7 @@ InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */ NoCompatibleInterfaceFound = 4, /**< A compatible interface with the required endpoints was not found */ }; - + /* Function Prototypes: */ uint8_t ProcessConfigurationDescriptor(void); @@ -78,3 +78,4 @@ uint8_t DComp_NextStillImageInterfaceDataEndpoint(void* CurrentDescriptor); #endif + diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h b/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h index 7bd8d4fe8..692b1fae8 100644 --- a/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h +++ b/Demos/Host/LowLevel/StillImageHost/Lib/PIMACodes.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -40,7 +40,7 @@ #define PIMA_OPERATION_GETDEVICEINFO 0x1001 #define PIMA_OPERATION_OPENSESSION 0x1002 #define PIMA_OPERATION_CLOSESESSION 0x1003 - + #define PIMA_RESPONSE_OK 0x2001 #define PIMA_RESPONSE_GENERALERROR 0x2002 #define PIMA_RESPONSE_SESSIONNOTOPEN 0x2003 @@ -49,3 +49,4 @@ #define PIMA_RESPONSE_PARAMETERNOTSUPPORTED 0x2006 #endif + diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c index 861f55b5d..9d6828e32 100644 --- a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c +++ b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -56,7 +56,7 @@ void SImage_SendBlockHeader(void) /* Write the PIMA block to the data OUT pipe */ Pipe_Write_Stream_LE(&PIMA_SendBlock, PIMA_COMMAND_SIZE(0)); - + /* If the block type is a command, send its parameters (if any) */ if (PIMA_SendBlock.Type == CType_CommandBlock) { @@ -69,11 +69,11 @@ void SImage_SendBlockHeader(void) /* Write the PIMA parameters to the data OUT pipe */ Pipe_Write_Stream_LE(&PIMA_SendBlock.Params, ParamBytes); } - + /* Send the PIMA command block to the attached device */ Pipe_ClearOUT(); } - + /* Freeze pipe after use */ Pipe_Freeze(); } @@ -89,16 +89,16 @@ uint8_t SImage_ReceiveEventHeader(void) /* Unfreeze the events pipe */ Pipe_SelectPipe(SIMAGE_EVENTS_PIPE); Pipe_Unfreeze(); - + /* Read in the event data into the global structure */ ErrorCode = Pipe_Read_Stream_LE(&PIMA_EventBlock, sizeof(PIMA_EventBlock)); - + /* Clear the pipe after read complete to prepare for next event */ Pipe_ClearIN(); - + /* Freeze the event pipe again after use */ Pipe_Freeze(); - + return ErrorCode; } @@ -114,7 +114,7 @@ uint8_t SImage_ReceiveBlockHeader(void) /* Unfreeze the data IN pipe */ Pipe_SelectPipe(SIMAGE_DATA_IN_PIPE); Pipe_Unfreeze(); - + /* Wait until data received on the IN pipe */ while (!(Pipe_IsINReceived())) { @@ -131,7 +131,7 @@ uint8_t SImage_ReceiveBlockHeader(void) if (!(TimeoutMSRem)) return PIPE_RWSTREAM_Timeout; } - + Pipe_Freeze(); Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE); Pipe_Unfreeze(); @@ -159,15 +159,15 @@ uint8_t SImage_ReceiveBlockHeader(void) /* Return error code */ return PIPE_RWSTREAM_PipeStalled; } - + /* Check to see if the device was disconnected, if so exit function */ if (USB_HostState == HOST_STATE_Unattached) return PIPE_RWSTREAM_DeviceDisconnected; } - + /* Load in the response from the attached device */ Pipe_Read_Stream_LE(&PIMA_ReceivedBlock, PIMA_COMMAND_SIZE(0)); - + /* Check if the returned block type is a response block */ if (PIMA_ReceivedBlock.Type == CType_ResponseBlock) { @@ -180,14 +180,14 @@ uint8_t SImage_ReceiveBlockHeader(void) /* Read the PIMA parameters from the data IN pipe */ Pipe_Read_Stream_LE(&PIMA_ReceivedBlock.Params, ParamBytes); } - + /* Clear pipe bank after use */ Pipe_ClearIN(); } - + /* Freeze the IN pipe after use */ Pipe_Freeze(); - + return PIPE_RWSTREAM_NoError; } @@ -206,7 +206,7 @@ uint8_t SImage_SendData(void* const Buffer, /* Unfreeze the data OUT pipe */ Pipe_SelectPipe(SIMAGE_DATA_OUT_PIPE); Pipe_Unfreeze(); - + /* Write the data contents to the pipe */ ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes); @@ -215,7 +215,7 @@ uint8_t SImage_SendData(void* const Buffer, /* Freeze the pipe again after use */ Pipe_Freeze(); - + return ErrorCode; } @@ -240,7 +240,7 @@ uint8_t SImage_ReadData(void* const Buffer, /* Freeze the pipe again after use */ Pipe_Freeze(); - + return ErrorCode; } @@ -255,13 +255,14 @@ bool SImage_IsEventReceived(void) /* Unfreeze the Event pipe */ Pipe_SelectPipe(SIMAGE_EVENTS_PIPE); Pipe_Unfreeze(); - + /* If the pipe contains data, an event has been received */ if (Pipe_BytesInPipe()) IsEventReceived = true; - + /* Freeze the pipe after use */ Pipe_Freeze(); - + return IsEventReceived; } + diff --git a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h index f2bb18953..2ab36c2ba 100644 --- a/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h +++ b/Demos/Host/LowLevel/StillImageHost/Lib/StillImageCommands.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,17 +32,17 @@ * * Header file for StillImageCommands.c. */ - + #ifndef _STILL_IMAGE_COMMANDS_H_ #define _STILL_IMAGE_COMMANDS_H_ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "PIMACodes.h" #include "../StillImageHost.h" - /* Macros: */ + /* Macros: */ /** Length in bytes of a given Unicode string's character length. * * \param[in] chars Total number of Unicode characters in the string @@ -51,7 +51,7 @@ /** Timeout period between the issuing of a command to a device, and the reception of the first packet. */ #define COMMAND_DATA_TIMEOUT_MS 10000 - + /** Used in the DataLength field of a PIMA container, to give the total container size in bytes for * a command container. * @@ -79,7 +79,7 @@ uint32_t TransactionID; /**< Unique container ID to link blocks together */ uint32_t Params[3]; /**< Block parameters to be issued along with the block code (command blocks only) */ } PIMA_Container_t; - + /* Enums: */ /** Enum for the possible PIMA contains types. */ enum PIMA_Container_Types_t @@ -90,12 +90,12 @@ CType_ResponseBlock = 3, /**< Response container type */ CType_EventBlock = 4, /**< Event Block container type */ }; - + /* External Variables: */ extern PIMA_Container_t PIMA_SendBlock; extern PIMA_Container_t PIMA_ReceivedBlock; extern PIMA_Container_t PIMA_EventBlock; - + /* Function Prototypes: */ void SImage_SendBlockHeader(void); uint8_t SImage_ReceiveBlockHeader(void); @@ -107,3 +107,4 @@ bool SImage_IsEventReceived(void); #endif + diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.c b/Demos/Host/LowLevel/StillImageHost/StillImageHost.c index 73f0c2c76..aa139e225 100644 --- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.c +++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -120,7 +120,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -135,7 +135,7 @@ void StillImage_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -145,7 +145,7 @@ void StillImage_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -167,16 +167,16 @@ void StillImage_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Still Image Device Enumerated.\r\n")); USB_HostState = HOST_STATE_Configured; break; case HOST_STATE_Configured: /* Indicate device busy via the status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_BUSY); - + puts_P(PSTR("Retrieving Device Info...\r\n")); - + PIMA_SendBlock = (PIMA_Container_t) { .DataLength = PIMA_COMMAND_SIZE(0), @@ -185,34 +185,34 @@ void StillImage_Task(void) .TransactionID = 0x00000000, .Params = {}, }; - + /* Send the GETDEVICEINFO block */ SImage_SendBlockHeader(); - + /* Receive the response data block */ if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError) { ShowCommandError(ErrorCode, false); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Calculate the size of the returned device info data structure */ uint16_t DeviceInfoSize = (PIMA_ReceivedBlock.DataLength - PIMA_COMMAND_SIZE(0)); - + /* Create a buffer large enough to hold the entire device info */ uint8_t DeviceInfo[DeviceInfoSize]; /* Read in the data block data (containing device info) */ SImage_ReadData(DeviceInfo, DeviceInfoSize); - + /* Once all the data has been read, the pipe must be cleared before the response can be sent */ Pipe_ClearIN(); - + /* Create a pointer for walking through the info dataset */ uint8_t* DeviceInfoPos = DeviceInfo; - + /* Skip over the data before the unicode device information strings */ DeviceInfoPos += 8; // Skip to VendorExtensionDesc String DeviceInfoPos += (1 + UNICODE_STRING_LENGTH(*DeviceInfoPos)); // Skip over VendorExtensionDesc String @@ -222,7 +222,7 @@ void StillImage_Task(void) DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over Supported Device Properties Array DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over Capture Formats Array DeviceInfoPos += (4 + (*(uint32_t*)DeviceInfoPos << 1)); // Skip over Image Formats Array - + /* Extract and convert the Manufacturer Unicode string to ASCII and print it through the USART */ char Manufacturer[*DeviceInfoPos]; UnicodeToASCII(DeviceInfoPos, Manufacturer); @@ -246,22 +246,22 @@ void StillImage_Task(void) if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError) { ShowCommandError(ErrorCode, false); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Verify that the command completed successfully */ if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK)) { ShowCommandError(PIMA_ReceivedBlock.Code, true); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + puts_P(PSTR("Opening Session...\r\n")); - + PIMA_SendBlock = (PIMA_Container_t) { .DataLength = PIMA_COMMAND_SIZE(1), @@ -270,24 +270,24 @@ void StillImage_Task(void) .TransactionID = 0x00000000, .Params = {0x00000001}, }; - + /* Send the OPENSESSION block, open a session with an ID of 0x0001 */ SImage_SendBlockHeader(); - + /* Receive the response block from the device */ if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError) { ShowCommandError(ErrorCode, false); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Verify that the command completed successfully */ if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK)) { ShowCommandError(PIMA_ReceivedBlock.Code, true); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } @@ -302,15 +302,15 @@ void StillImage_Task(void) .TransactionID = 0x00000001, .Params = {0x00000001}, }; - + /* Send the CLOSESESSION block, close the session with an ID of 0x0001 */ SImage_SendBlockHeader(); - + /* Receive the response block from the device */ if ((ErrorCode = SImage_ReceiveBlockHeader()) != PIPE_RWSTREAM_NoError) { ShowCommandError(ErrorCode, false); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } @@ -319,7 +319,7 @@ void StillImage_Task(void) if ((PIMA_ReceivedBlock.Type != CType_ResponseBlock) || (PIMA_ReceivedBlock.Code != PIMA_RESPONSE_OK)) { ShowCommandError(PIMA_ReceivedBlock.Code, true); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } @@ -328,7 +328,7 @@ void StillImage_Task(void) /* Indicate device no longer busy */ LEDs_SetAllLEDs(LEDMASK_USB_READY); - + USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } @@ -345,17 +345,17 @@ void UnicodeToASCII(uint8_t* UnicodeString, { /* Get the number of characters in the string, skip to the start of the string data */ uint8_t CharactersRemaining = *(UnicodeString++); - + /* Loop through the entire unicode string */ while (CharactersRemaining--) { /* Load in the next unicode character (only the lower byte, as only Unicode coded ASCII is supported) */ *(Buffer++) = *UnicodeString; - + /* Jump to the next unicode character */ UnicodeString += 2; } - + /* Null terminate the string */ *Buffer = 0; } @@ -372,7 +372,8 @@ void ShowCommandError(uint8_t ErrorCode, printf_P(PSTR(ESC_FG_RED "Command Error (%S).\r\n" " -- Error Code %d\r\n" ESC_FG_WHITE), FailureType, ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } + diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.h b/Demos/Host/LowLevel/StillImageHost/StillImageHost.h index 61e5eb5b5..9c88f71f0 100644 --- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.h +++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -42,7 +42,7 @@ #include <avr/power.h> #include <avr/interrupt.h> #include <stdio.h> - + #include "ConfigDescriptor.h" #include "Lib/PIMACodes.h" @@ -52,7 +52,7 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -68,11 +68,11 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 - + /* Function Prototypes: */ void StillImage_Task(void); void SetupHardware(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); @@ -84,5 +84,6 @@ char* Buffer); void ShowCommandError(uint8_t ErrorCode, bool ResponseCodeError); - + #endif + diff --git a/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt b/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt index 95a2e14b5..2dc3b662b 100644 --- a/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt +++ b/Demos/Host/LowLevel/StillImageHost/StillImageHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Still Image Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Still Image Device</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>N/A</td> * </tr> @@ -40,12 +40,12 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Still Image host demonstration application. This gives a simple reference * application for implementing a Still Image host, for USB devices such as * digital cameras. - * + * * This demo will enumerate an attached USB Still Image device, print out its * information structure, open a session with the device and finally close the * session. @@ -62,3 +62,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/StillImageHost/makefile b/Demos/Host/LowLevel/StillImageHost/makefile index 087802248..2947de859 100644 --- a/Demos/Host/LowLevel/StillImageHost/makefile +++ b/Demos/Host/LowLevel/StillImageHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -135,7 +135,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -148,7 +148,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -262,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -275,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -287,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -299,7 +299,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -322,7 +322,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -356,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -390,7 +390,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -419,7 +419,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -438,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -506,11 +506,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -537,9 +537,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -637,14 +637,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -666,7 +666,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -710,3 +710,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c index 7d9fb38c0..54eb99c84 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -34,7 +34,7 @@ * needed to communication with an attached USB device. Descriptors are special computer-readable structures * which the host requests upon device enumeration, to determine the device's capabilities and functions. */ - + #include "ConfigDescriptor.h" /** Reads and processes an attached device's descriptors, to determine compatibility and pipe configurations. This @@ -50,7 +50,7 @@ uint8_t ProcessConfigurationDescriptor(void) uint8_t ConfigDescriptorData[512]; void* CurrConfigLocation = ConfigDescriptorData; uint16_t CurrConfigBytesRem; - + USB_Descriptor_Interface_t* CDCControlInterface = NULL; USB_Descriptor_Endpoint_t* DataINEndpoint = NULL; USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL; @@ -85,7 +85,7 @@ uint8_t ProcessConfigurationDescriptor(void) { /* Descriptor not found, error out */ return NoCompatibleInterfaceFound; - } + } /* Clear any found endpoints */ DataINEndpoint = NULL; @@ -111,7 +111,7 @@ uint8_t ProcessConfigurationDescriptor(void) /* Skip the remainder of the loop as we have not found an endpoint yet */ continue; } - + /* Retrieve the endpoint address from the endpoint descriptor */ USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(CurrConfigLocation, USB_Descriptor_Endpoint_t); @@ -129,7 +129,7 @@ uint8_t ProcessConfigurationDescriptor(void) DataOUTEndpoint = EndpointData; } } - + /* Configure the CDC data IN pipe */ Pipe_ConfigurePipe(CDC_DATA_IN_PIPE, EP_TYPE_BULK, PIPE_TOKEN_IN, DataINEndpoint->EndpointAddress, DataINEndpoint->EndpointSize, PIPE_BANK_SINGLE); @@ -167,7 +167,7 @@ uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -191,7 +191,7 @@ uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_Found; } } - + return DESCRIPTOR_SEARCH_NotFound; } @@ -211,7 +211,7 @@ uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor) { uint8_t EndpointType = (DESCRIPTOR_CAST(CurrentDescriptor, USB_Descriptor_Endpoint_t).Attributes & EP_TYPE_MASK); - + if ((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT)) return DESCRIPTOR_SEARCH_Found; } @@ -222,3 +222,4 @@ uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor) return DESCRIPTOR_SEARCH_NotFound; } + diff --git a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h index 2e4730c55..270e130ae 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h +++ b/Demos/Host/LowLevel/VirtualSerialHost/ConfigDescriptor.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -38,9 +38,9 @@ /* Includes: */ #include <LUFA/Drivers/USB/USB.h> - + #include "VirtualSerialHost.h" - + /* Macros: */ /** Interface Class value for the CDC class. */ #define CDC_CONTROL_CLASS 0x02 @@ -50,7 +50,7 @@ /** Interface Class value for the CDC protocol. */ #define CDC_CONTROL_PROTOCOL 0x01 - + /** Interface Class value for the CDC data class. */ #define CDC_DATA_CLASS 0x0A @@ -59,7 +59,7 @@ /** Interface Class value for the CDC data protocol. */ #define CDC_DATA_PROTOCOL 0x00 - + /** Pipe number for the CDC data IN pipe. */ #define CDC_DATA_IN_PIPE 1 @@ -81,10 +81,11 @@ }; /* Function Prototypes: */ - uint8_t ProcessConfigurationDescriptor(void); - + uint8_t ProcessConfigurationDescriptor(void); + uint8_t DComp_NextCDCControlInterface(void* CurrentDescriptor); uint8_t DComp_NextCDCDataInterface(void* CurrentDescriptor); uint8_t DComp_NextCDCDataInterfaceEndpoint(void* CurrentDescriptor); - + #endif + diff --git a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c index 91775b7a4..f5fcdb10b 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c +++ b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -33,7 +33,7 @@ * Main source file for the VirtualSerialHost demo. This file contains the main tasks of * the demo and is responsible for the initial application hardware configuration. */ - + #include "VirtualSerialHost.h" /** Main program entry point. This routine configures the hardware required by the application, then @@ -119,7 +119,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, " -- Error Code %d\r\n" " -- Sub Error Code %d\r\n" " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState); - + LEDs_SetAllLEDs(LEDMASK_USB_ERROR); } @@ -134,7 +134,7 @@ void CDC_Host_Task(void) { case HOST_STATE_Addressed: puts_P(PSTR("Getting Config Data.\r\n")); - + /* Get and process the configuration descriptor data */ if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead) { @@ -144,7 +144,7 @@ void CDC_Host_Task(void) puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n")); printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode); - + /* Indicate error via status LEDs */ LEDs_SetAllLEDs(LEDMASK_USB_ERROR); @@ -152,7 +152,7 @@ void CDC_Host_Task(void) USB_HostState = HOST_STATE_WaitForDeviceRemoval; break; } - + /* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */ if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful) { @@ -188,10 +188,10 @@ void CDC_Host_Task(void) /* Get the length of the pipe data, and create a new buffer to hold it */ uint16_t BufferLength = Pipe_BytesInPipe(); uint8_t Buffer[BufferLength]; - + /* Read in the pipe data to the temporary buffer */ Pipe_Read_Stream_LE(Buffer, BufferLength); - + /* Print out the buffer contents to the USART */ for (uint16_t BufferByte = 0; BufferByte < BufferLength; BufferByte++) putchar(Buffer[BufferByte]); @@ -207,17 +207,18 @@ void CDC_Host_Task(void) /* Select and unfreeze the notification pipe */ Pipe_SelectPipe(CDC_NOTIFICATION_PIPE); Pipe_Unfreeze(); - + /* Check if a packet has been received */ if (Pipe_IsINReceived()) { /* Discard the unused event notification */ Pipe_ClearIN(); } - + /* Freeze notification IN pipe after use */ Pipe_Freeze(); - + break; } } + diff --git a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h index d55fa68af..fb3b3f187 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h +++ b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -49,9 +49,9 @@ #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/Peripheral/SerialStream.h> #include <LUFA/Drivers/Board/LEDs.h> - + #include "ConfigDescriptor.h" - + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -64,16 +64,17 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void CDC_Host_Task(void); - + void EVENT_USB_Host_HostError(const uint8_t ErrorCode); void EVENT_USB_Host_DeviceAttached(void); void EVENT_USB_Host_DeviceUnattached(void); void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode); void EVENT_USB_Host_DeviceEnumerationComplete(void); - + #endif + diff --git a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt index d771b7976..80a470818 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt +++ b/Demos/Host/LowLevel/VirtualSerialHost/VirtualSerialHost.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage CDC Host Demo * * \section SSec_Compat Demo Compatibility: @@ -25,7 +25,7 @@ * <td><b>USB Class:</b></td> * <td>Communications Device Class (CDC)</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Abstract Control Model (ACM)</td> * </tr> @@ -39,13 +39,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * CDC host demonstration application. This gives a simple reference application * for implementing a USB CDC host, for CDC devices using the standard ACM profile. - * + * * This demo prints out received CDC data through the serial port. - * + * * Not that this demo is only compatible with devices which report the correct CDC * and ACM class, subclass and protocol values. Most USB-Serial cables have vendor * specific features, thus use vendor-specific class/subclass/protocol codes to force @@ -63,3 +63,4 @@ * </tr> * </table> */ + diff --git a/Demos/Host/LowLevel/VirtualSerialHost/makefile b/Demos/Host/LowLevel/VirtualSerialHost/makefile index 43677949d..09a245808 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/makefile +++ b/Demos/Host/LowLevel/VirtualSerialHost/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -134,7 +134,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -147,7 +147,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -261,7 +261,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -274,7 +274,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -286,7 +286,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -298,7 +298,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -321,7 +321,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -355,7 +355,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -389,7 +389,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -418,7 +418,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -437,10 +437,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -505,11 +505,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -536,9 +536,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -636,14 +636,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -665,7 +665,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -709,3 +709,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + diff --git a/Demos/Host/LowLevel/makefile b/Demos/Host/LowLevel/makefile index 2dec7c85b..9a7c46578 100644 --- a/Demos/Host/LowLevel/makefile +++ b/Demos/Host/LowLevel/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -60,3 +60,4 @@ all: $(MAKE) -C RNDISEthernetHost $@ $(MAKE) -C StillImageHost $@ $(MAKE) -C VirtualSerialHost $@ + diff --git a/Demos/Host/makefile b/Demos/Host/makefile index ce80f4e96..f389781e5 100644 --- a/Demos/Host/makefile +++ b/Demos/Host/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -18,3 +18,4 @@ all: %: $(MAKE) -C ClassDriver $@ $(MAKE) -C LowLevel $@ + diff --git a/Demos/makefile b/Demos/makefile index 30434b7ea..0dbfc1da0 100644 --- a/Demos/makefile +++ b/Demos/makefile @@ -1,7 +1,7 @@ # # LUFA Library # Copyright (C) Dean Camera, 2010. -# +# # dean [at] fourwalledcubicle [dot] com # www.fourwalledcubicle.com # @@ -19,3 +19,4 @@ all: $(MAKE) -C Device $@ $(MAKE) -C Host $@ $(MAKE) -C DualRole $@ + |