diff options
Diffstat (limited to 'Demos/Device/ClassDriver/AudioOutput')
-rw-r--r-- | Demos/Device/ClassDriver/AudioOutput/AudioOutput.c | 17 | ||||
-rw-r--r-- | Demos/Device/ClassDriver/AudioOutput/AudioOutput.h | 23 | ||||
-rw-r--r-- | Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt | 11 | ||||
-rw-r--r-- | Demos/Device/ClassDriver/AudioOutput/Descriptors.c | 117 | ||||
-rw-r--r-- | Demos/Device/ClassDriver/AudioOutput/Descriptors.h | 23 | ||||
-rw-r--r-- | Demos/Device/ClassDriver/AudioOutput/makefile | 49 |
6 files changed, 123 insertions, 117 deletions
diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c index cf2eb2d30..33b52a184 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -60,7 +60,7 @@ int main(void) LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); sei(); - + for (;;) { ProcessNextSample(); @@ -135,7 +135,7 @@ void ProcessNextSample(void) void EVENT_USB_Device_Connect(void) { LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); - + /* Sample reload timer initialization */ OCR0A = (F_CPU / 8 / AUDIO_SAMPLE_FREQUENCY) - 1; TCCR0A = (1 << WGM01); // CTC mode @@ -200,3 +200,4 @@ void EVENT_USB_Device_UnhandledControlRequest(void) { Audio_Device_ProcessControlRequest(&Speaker_Audio_Interface); } + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h index 5a7b2efe8..62498cb7f 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -44,13 +44,13 @@ #include <stdlib.h> #include "Descriptors.h" - + #include <LUFA/Version.h> #include <LUFA/Drivers/Board/LEDs.h> #include <LUFA/Drivers/USB/USB.h> #include <LUFA/Drivers/USB/Class/Audio.h> - - /* Macros: */ + + /* Macros: */ /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ #define LEDMASK_USB_NOTREADY LEDS_LED1 @@ -62,14 +62,15 @@ /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) - + /* Function Prototypes: */ void SetupHardware(void); void ProcessNextSample(void); - + void EVENT_USB_Device_Connect(void); void EVENT_USB_Device_Disconnect(void); void EVENT_USB_Device_ConfigurationChanged(void); void EVENT_USB_Device_UnhandledControlRequest(void); #endif + diff --git a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt index 079b537b0..c42fc744b 100644 --- a/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt +++ b/Demos/Device/ClassDriver/AudioOutput/AudioOutput.txt @@ -3,7 +3,7 @@ * This file contains special DoxyGen information for the generation of the main page and other special * documentation pages. It is not a project source file. */ - + /** \mainpage Audio Output Device Demo * * \section SSec_Compat Demo Compatibility: @@ -27,7 +27,7 @@ * <td><b>USB Class:</b></td> * <td>Audio Class</td> * </tr> - * <tr> + * <tr> * <td><b>USB Subclass:</b></td> * <td>Standard Audio Device</td> * </tr> @@ -43,13 +43,13 @@ * </tr> * </table> * - * \section SSec_Description Project Description: + * \section SSec_Description Project Description: * * Audio demonstration application. This gives a simple reference * application for implementing a USB Audio Output device using the * basic USB Audio 1.0 drivers in all modern OSes (i.e. no special drivers * required). - * + * * On start-up the system will automatically enumerate and function * as a USB speaker. Outgoing audio will output in 8-bit PWM onto * the timer 3 output compare channel A for AUDIO_OUT_MONO mode, on @@ -57,7 +57,7 @@ * mono sample for AUDIO_OUT_PORTC. Audio output will also be indicated on * the board LEDs in all modes. Decouple audio outputs with a capacitor and * attach to a speaker to hear the audio. - * + * * Under Windows, if a driver request dialogue pops up, select the option * to automatically install the appropriate drivers. * @@ -94,3 +94,4 @@ * </tr> * </table> */ + diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c index b82d5ab22..35ceeb29a 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.c +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.c @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -30,11 +30,11 @@ /** \file * - * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special * computer-readable structures which the host requests upon device enumeration, to determine - * the device's capabilities and functions. + * the device's capabilities and functions. */ - + #include "Descriptors.h" /** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall @@ -71,7 +71,7 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor = */ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = { - .Config = + .Config = { .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, @@ -80,133 +80,133 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .ConfigurationNumber = 1, .ConfigurationStrIndex = NO_DESCRIPTOR, - + .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED), - + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) }, - - .Audio_ControlInterface = + + .Audio_ControlInterface = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 0, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x01, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_ControlInterface_SPC = + + .Audio_ControlInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AC_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_Header, - + .ACSpecification = VERSION_BCD(01.00), .TotalLength = (sizeof(USB_Audio_Descriptor_Interface_AC_t) + sizeof(USB_Audio_Descriptor_InputTerminal_t) + sizeof(USB_Audio_Descriptor_OutputTerminal_t)), - + .InCollection = 1, .InterfaceNumber = 1, }, - .Audio_InputTerminal = + .Audio_InputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_InputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_InputTerminal, - + .TerminalID = 0x01, .TerminalType = AUDIO_TERMINAL_STREAMING, .AssociatedOutputTerminal = 0x00, - + .TotalChannels = 2, .ChannelConfig = (AUDIO_CHANNEL_LEFT_FRONT | AUDIO_CHANNEL_RIGHT_FRONT), - + .ChannelStrIndex = NO_DESCRIPTOR, .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_OutputTerminal = + .Audio_OutputTerminal = { .Header = {.Size = sizeof(USB_Audio_Descriptor_OutputTerminal_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_OutputTerminal, - + .TerminalID = 0x02, .TerminalType = AUDIO_TERMINAL_OUT_SPEAKER, .AssociatedInputTerminal = 0x00, - + .SourceID = 0x01, - + .TerminalStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt0 = + .Audio_StreamInterface_Alt0 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 0, - + .TotalEndpoints = 0, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - .Audio_StreamInterface_Alt1 = + .Audio_StreamInterface_Alt1 = { .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, .InterfaceNumber = 1, .AlternateSetting = 1, - + .TotalEndpoints = 1, - + .Class = 0x01, .SubClass = 0x02, .Protocol = 0x00, - + .InterfaceStrIndex = NO_DESCRIPTOR }, - - .Audio_StreamInterface_SPC = + + .Audio_StreamInterface_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Interface_AS_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_General, - + .TerminalLink = 0x01, - + .FrameDelay = 1, .AudioFormat = 0x0001 }, - - .Audio_AudioFormat = + + .Audio_AudioFormat = { .Header = {.Size = sizeof(USB_Audio_Descriptor_Format_t), .Type = DTYPE_CSInterface}, .Subtype = AUDIO_DSUBTYPE_CSInterface_FormatType, .FormatType = 0x01, .Channels = 0x02, - + .SubFrameSize = 0x02, .BitResolution = 16, - .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, + .SampleFrequencyType = AUDIO_TOTAL_SAMPLE_RATES, .SampleFrequencies = {AUDIO_SAMPLE_FREQ(AUDIO_SAMPLE_FREQUENCY)} }, - - .Audio_StreamEndpoint = + + .Audio_StreamEndpoint = { - .Endpoint = + .Endpoint = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Std_t), .Type = DTYPE_Endpoint}, @@ -215,18 +215,18 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = .EndpointSize = AUDIO_STREAM_EPSIZE, .PollingIntervalMS = 1 }, - + .Refresh = 0, .SyncEndpointNumber = 0 }, - - .Audio_StreamEndpoint_SPC = + + .Audio_StreamEndpoint_SPC = { .Header = {.Size = sizeof(USB_Audio_Descriptor_StreamEndpoint_Spc_t), .Type = DTYPE_CSEndpoint}, .Subtype = AUDIO_DSUBTYPE_CSEndpoint_General, - + .Attributes = AUDIO_EP_ACCEPTS_SMALL_PACKETS, - + .LockDelayUnits = 0x00, .LockDelay = 0x0000 } @@ -291,26 +291,27 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, Address = &ConfigurationDescriptor; Size = sizeof(USB_Descriptor_Configuration_t); break; - case DTYPE_String: + case DTYPE_String: switch (DescriptorNumber) { case 0x00: Address = &LanguageString; Size = pgm_read_byte(&LanguageString.Header.Size); break; - case 0x01: + case 0x01: Address = &ManufacturerString; Size = pgm_read_byte(&ManufacturerString.Header.Size); break; - case 0x02: + case 0x02: Address = &ProductString; Size = pgm_read_byte(&ProductString.Header.Size); break; } - + break; } - + *DescriptorAddress = Address; return Size; } + diff --git a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h index 588f584e9..5ca7afbf5 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Descriptors.h +++ b/Demos/Device/ClassDriver/AudioOutput/Descriptors.h @@ -1,7 +1,7 @@ /* LUFA Library Copyright (C) Dean Camera, 2010. - + dean [at] fourwalledcubicle [dot] com www.fourwalledcubicle.com */ @@ -9,13 +9,13 @@ /* Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Permission to use, copy, modify, distribute, and sell this + Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in + without fee, provided that the above copyright notice appear in all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the software without specific, written prior permission. The author disclaim all warranties with regard to this @@ -32,7 +32,7 @@ * * Header file for Descriptors.c. */ - + #ifndef _DESCRIPTORS_H_ #define _DESCRIPTORS_H_ @@ -45,16 +45,16 @@ /* Macros: */ /** Endpoint number of the Audio isochronous streaming data endpoint. */ #define AUDIO_STREAM_EPNUM 1 - + /** Endpoint size in bytes of the Audio isochronous streaming data endpoint. The Windows audio stack requires * at least 192 bytes for correct output, thus the smaller 128 byte maximum endpoint size on some of the smaller * USB AVR models will result in unavoidable distorted output. */ #define AUDIO_STREAM_EPSIZE ENDPOINT_MAX_SIZE(AUDIO_STREAM_EPNUM) - + /** Sample frequency of the data being transmitted through the streaming endpoint. */ #define AUDIO_SAMPLE_FREQUENCY 48000 - + /* Type Defines: */ /** Type define for the device configuration descriptor structure. This must be defined in the * application code, as the configuration descriptor contains several sub-descriptors which @@ -74,7 +74,7 @@ USB_Audio_Descriptor_StreamEndpoint_Std_t Audio_StreamEndpoint; USB_Audio_Descriptor_StreamEndpoint_Spc_t Audio_StreamEndpoint_SPC; } USB_Descriptor_Configuration_t; - + /* Function Prototypes: */ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, @@ -82,3 +82,4 @@ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); #endif + diff --git a/Demos/Device/ClassDriver/AudioOutput/makefile b/Demos/Device/ClassDriver/AudioOutput/makefile index 660399b43..9ff71b2e1 100644 --- a/Demos/Device/ClassDriver/AudioOutput/makefile +++ b/Demos/Device/ClassDriver/AudioOutput/makefile @@ -47,7 +47,7 @@ # make doxygen = Generate DoxyGen documentation for the project (must have # DoxyGen installed) # -# make debug = Start either simulavr or avarice as specified for debugging, +# make debug = Start either simulavr or avarice as specified for debugging, # with avr-gdb or avr-insight as the front end for debugging. # # make filename.s = Just compile filename.c into the assembler code only. @@ -64,14 +64,14 @@ MCU = at90usb1287 # Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called +# LUFA board drivers). If USER is selected, put custom board drivers in a directory called # "Board" inside the application directory. BOARD = USBKEY # Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to # calculate timings. Do NOT tack on a 'UL' at the end, this will be done # automatically to create a 32-bit value in your source code. # @@ -84,7 +84,7 @@ F_CPU = 8000000 # Input clock frequency. -# This will define a symbol, F_CLOCK, in all source code files equal to the +# This will define a symbol, F_CLOCK, in all source code files equal to the # input clock frequency (before any prescaling is performed) in Hz. This value may # differ from F_CPU if prescaling is used on the latter, and is required as the # raw input clock is fed directly to the PLL sections of the AVR for high speed @@ -139,7 +139,7 @@ SRC = $(TARGET).c \ # List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = +CPPSRC = # List Assembler source files here. @@ -152,7 +152,7 @@ CPPSRC = ASRC = -# Optimization level, can be [0, 1, 2, 3, s]. +# Optimization level, can be [0, 1, 2, 3, s]. # 0 = turn off optimization. s = optimize for size. # (Note: 3 is not always the best optimization level. See avr-libc FAQ.) OPT = s @@ -266,7 +266,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) # for use in COFF files, additional information about filenames # and function names needs to be present in the assembler source # files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# -listing-cont-lines: Sets the maximum number of continuation lines of hex # dump that will be displayed for a given single line of source input. ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 @@ -279,7 +279,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt # If this is left blank, then it will use the Standard printf version. -PRINTF_LIB = +PRINTF_LIB = #PRINTF_LIB = $(PRINTF_LIB_MIN) #PRINTF_LIB = $(PRINTF_LIB_FLOAT) @@ -291,7 +291,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt # If this is left blank, then it will use the Standard scanf version. -SCANF_LIB = +SCANF_LIB = #SCANF_LIB = $(SCANF_LIB_MIN) #SCANF_LIB = $(SCANF_LIB_FLOAT) @@ -303,7 +303,7 @@ MATH_LIB = -lm # Each directory must be seperated by a space. # Use forward slashes for directory separators. # For a directory that has spaces, enclose it in quotes. -EXTRALIBDIRS = +EXTRALIBDIRS = @@ -326,7 +326,7 @@ EXTMEMOPTS = # -Map: create map file # --cref: add cross reference to map file LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--relax LDFLAGS += -Wl,--gc-sections LDFLAGS += $(EXTMEMOPTS) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) @@ -360,7 +360,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex #AVRDUDE_NO_VERIFY = -V # Increase verbosity level. Please use this when submitting bug -# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> +# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> # to submit bug reports. #AVRDUDE_VERBOSE = -v -v @@ -394,7 +394,7 @@ JTAG_DEV = /dev/com1 DEBUG_PORT = 4242 # Debugging host used to communicate between GDB / avarice / simulavr, normally -# just set to localhost unless doing some sort of crazy debugging when +# just set to localhost unless doing some sort of crazy debugging when # avarice is running on a different computer. DEBUG_HOST = localhost @@ -423,7 +423,7 @@ WINSHELL = cmd MSG_ERRORS_NONE = Errors: none MSG_BEGIN = -------- begin -------- MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: +MSG_SIZE_BEFORE = Size before: MSG_SIZE_AFTER = Size after: MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: @@ -442,10 +442,10 @@ MSG_CREATING_LIBRARY = Creating library: # Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) +OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) # Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) +LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) # Compiler flags to generate dependency files. @@ -510,11 +510,11 @@ sizeafter: # Display compiler version information. -gccversion : +gccversion : @$(CC) --version -# Program the device. +# Program the device. program: $(TARGET).hex $(TARGET).eep $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) @@ -541,9 +541,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep # Generate avr-gdb config/init file which does the following: -# define the reset signal, load the target file, connect to target, and set +# define the reset signal, load the target file, connect to target, and set # a breakpoint at main(). -gdb-config: +gdb-config: @$(REMOVE) $(GDBINIT_FILE) @echo define reset >> $(GDBINIT_FILE) @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) @@ -641,14 +641,14 @@ extcoff: $(TARGET).elf $(OBJDIR)/%.o : %.c @echo @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ + $(CC) -c $(ALL_CFLAGS) $< -o $@ # Compile: create object files from C++ source files. $(OBJDIR)/%.o : %.cpp @echo @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ # Compile: create assembler files from C source files. @@ -670,7 +670,7 @@ $(OBJDIR)/%.o : %.S # Create preprocessed source for use in sending a bug report. %.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ # Target: clean project. @@ -714,3 +714,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null) build elf hex eep lss sym coff extcoff doxygen clean \ clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ debug gdb-config + |