Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better.

5 files changed, 8 insertions, 8 deletions

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
index 14ad97c74..7921b03bc 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
@@ -199,7 +199,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16
 	XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
 	XPROGTarget_SendByte(ReadSize - 1);
 		
-	/* Send a LD command with indirect access and postincrement to read out the bytes */
+	/* Send a LD command with indirect access and post-increment to read out the bytes */
 	XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
 	while (ReadSize-- && TimeoutMSRemaining)
 	  *(ReadBuffer++) = XPROGTarget_ReceiveByte();
@@ -286,7 +286,7 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Eras
 		XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
 		XPROGTarget_SendByte(WriteSize - 1);
 			
-		/* Send a ST command with indirect access and postincrement to write the bytes */
+		/* Send a ST command with indirect access and post-increment to write the bytes */
 		XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
 		while (WriteSize--)
 		  XPROGTarget_SendByte(*(WriteBuffer++));
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index ab4d4262a..47e2b4dff 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -256,7 +256,7 @@ static void XPROGProtocol_Erase(void)
 				break;
 		}
 		
-		/* Erase the target memory, indicate timeout if ocurred */
+		/* Erase the target memory, indicate timeout if occurred */
 		if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;
 	}
@@ -267,7 +267,7 @@ static void XPROGProtocol_Erase(void)
 		else
 		  EraseCommand = TINY_NVM_CMD_SECTIONERASE;
 	
-		/* Erase the target memory, indicate timeout if ocurred */
+		/* Erase the target memory, indicate timeout if occurred */
 		if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;
 	}
diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c
index 81f023740..a23ea456d 100644
--- a/Projects/XPLAINBridge/Lib/SoftUART.c
+++ b/Projects/XPLAINBridge/Lib/SoftUART.c
@@ -54,12 +54,12 @@ static uint8_t RX_Data;
 /** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
 void SoftUART_Init(void)
 {
-	/* Set TX pin to output high, enable RX pullup */
+	/* Set TX pin to output high, enable RX pull-up */
 	STXPORT |= (1 << STX);
 	STXDDR  |= (1 << STX);
 	SRXPORT |= (1 << SRX);
 
-	/* Enable INT0 for the detection of incomming start bits that signal the start of a byte */
+	/* Enable INT0 for the detection of incoming start bits that signal the start of a byte */
 	EICRA  = (1 << ISC01);
 	EIMSK  = (1 << INT0);
 
diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c
index 1929e4f29..329a20627 100644
--- a/Projects/XPLAINBridge/USARTDescriptors.c
+++ b/Projects/XPLAINBridge/USARTDescriptors.c
@@ -218,7 +218,7 @@ USB_Descriptor_String_t PROGMEM USART_ProductString =
 	.UnicodeString          = L"LUFA XPLAIN Bridge"
 };
 
-/** Descriptior retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
+/** Descriptor retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor
  *  callback function in the main source file, to retrieve the device's descriptors when in USART bridge mode.
  */
 uint16_t USART_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index 35a3951f4..ad3fc6c95 100644
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -156,7 +156,7 @@ void SetupHardware(void)
 	MCUCR |= (1 << JTD);
 	MCUCR |= (1 << JTD);
 
-	/* Enable pullup on the JTAG TDI pin so we can use it to select the mode */
+	/* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
 	PORTF |= (1 << 7);
 	_delay_ms(10);