From 711542ee8986482a12796ffdbc4a32912b267e44 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 16 Jun 2010 11:01:01 +0000 Subject: Spell check code and manual pages. Remove custom Doxygen CSS stylesheet, as the new 1.7 Doxygen's default stylesheet is much better. --- Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c | 4 ++-- Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c | 4 ++-- Projects/XPLAINBridge/Lib/SoftUART.c | 4 ++-- Projects/XPLAINBridge/USARTDescriptors.c | 2 +- Projects/XPLAINBridge/XPLAINBridge.c | 2 +- 5 files changed, 8 insertions(+), 8 deletions(-) (limited to 'Projects') diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c index 14ad97c74..7921b03bc 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c @@ -199,7 +199,7 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16 XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE); XPROGTarget_SendByte(ReadSize - 1); - /* Send a LD command with indirect access and postincrement to read out the bytes */ + /* Send a LD command with indirect access and post-increment to read out the bytes */ XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE); while (ReadSize-- && TimeoutMSRemaining) *(ReadBuffer++) = XPROGTarget_ReceiveByte(); @@ -286,7 +286,7 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Eras XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE); XPROGTarget_SendByte(WriteSize - 1); - /* Send a ST command with indirect access and postincrement to write the bytes */ + /* Send a ST command with indirect access and post-increment to write the bytes */ XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE); while (WriteSize--) XPROGTarget_SendByte(*(WriteBuffer++)); diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c index ab4d4262a..47e2b4dff 100644 --- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c +++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c @@ -256,7 +256,7 @@ static void XPROGProtocol_Erase(void) break; } - /* Erase the target memory, indicate timeout if ocurred */ + /* Erase the target memory, indicate timeout if occurred */ if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) ReturnStatus = XPRG_ERR_TIMEOUT; } @@ -267,7 +267,7 @@ static void XPROGProtocol_Erase(void) else EraseCommand = TINY_NVM_CMD_SECTIONERASE; - /* Erase the target memory, indicate timeout if ocurred */ + /* Erase the target memory, indicate timeout if occurred */ if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address))) ReturnStatus = XPRG_ERR_TIMEOUT; } diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c index 81f023740..a23ea456d 100644 --- a/Projects/XPLAINBridge/Lib/SoftUART.c +++ b/Projects/XPLAINBridge/Lib/SoftUART.c @@ -54,12 +54,12 @@ static uint8_t RX_Data; /** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */ void SoftUART_Init(void) { - /* Set TX pin to output high, enable RX pullup */ + /* Set TX pin to output high, enable RX pull-up */ STXPORT |= (1 << STX); STXDDR |= (1 << STX); SRXPORT |= (1 << SRX); - /* Enable INT0 for the detection of incomming start bits that signal the start of a byte */ + /* Enable INT0 for the detection of incoming start bits that signal the start of a byte */ EICRA = (1 << ISC01); EIMSK = (1 << INT0); diff --git a/Projects/XPLAINBridge/USARTDescriptors.c b/Projects/XPLAINBridge/USARTDescriptors.c index 1929e4f29..329a20627 100644 --- a/Projects/XPLAINBridge/USARTDescriptors.c +++ b/Projects/XPLAINBridge/USARTDescriptors.c @@ -218,7 +218,7 @@ USB_Descriptor_String_t PROGMEM USART_ProductString = .UnicodeString = L"LUFA XPLAIN Bridge" }; -/** Descriptior retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor +/** Descriptor retrieval function for the USART Bridge descriptors. This function is in turn called by the GetDescriptor * callback function in the main source file, to retrieve the device's descriptors when in USART bridge mode. */ uint16_t USART_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress) diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c index 35a3951f4..ad3fc6c95 100644 --- a/Projects/XPLAINBridge/XPLAINBridge.c +++ b/Projects/XPLAINBridge/XPLAINBridge.c @@ -156,7 +156,7 @@ void SetupHardware(void) MCUCR |= (1 << JTD); MCUCR |= (1 << JTD); - /* Enable pullup on the JTAG TDI pin so we can use it to select the mode */ + /* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */ PORTF |= (1 << 7); _delay_ms(10); -- cgit v1.2.3