Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

1 files changed, 25 insertions, 24 deletions

diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c
index a9afda4a3..735d7346b 100644
--- a/Projects/Benito/Benito.c
+++ b/Projects/Benito/Benito.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -60,7 +60,7 @@ uint8_t FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
  */
 USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 	{
-		.Config = 
+		.Config =
 			{
 				.ControlInterfaceNumber         = 0,
 
@@ -84,9 +84,9 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 int main(void)
 {
 	SetupHardware();
-	
+
 	RingBuffer_InitBuffer(&Tx_Buffer);
-	
+
 	sei();
 
 	for (;;)
@@ -98,9 +98,9 @@ int main(void)
 			UDR1 = ReceivedByte;
 
 			LEDs_TurnOnLEDs(LEDMASK_TX);
-			PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;			
+			PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;
 		}
-		
+
 		/* Check if the millisecond timer has elapsed */
 		if (TIFR0 & (1 << OCF0A))
 		{
@@ -110,14 +110,14 @@ int main(void)
 				LEDs_TurnOffLEDs(LEDMASK_BUSY);
 				AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
 			}
-			
+
 			/* Check if the LEDs should be ping-ponging (during enumeration) */
 			if (PulseMSRemaining.PingPongLEDPulse && !(--PulseMSRemaining.PingPongLEDPulse))
 			{
 				LEDs_ToggleLEDs(LEDMASK_TX | LEDMASK_RX);
 				PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS;
 			}
-		
+
 			/* Turn off TX LED(s) once the TX pulse period has elapsed */
 			if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse))
 			  LEDs_TurnOffLEDs(LEDMASK_TX);
@@ -139,14 +139,14 @@ int main(void)
 					LEDs_TurnOnLEDs(LEDMASK_RX);
 					PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;
 				}
-				
+
 				FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
 			}
 
 			/* Clear the millisecond timer CTC flag (cleared by writing logic one to the register) */
-			TIFR0 |= (1 << OCF0A);		
+			TIFR0 |= (1 << OCF0A);
 		}
-		
+
 		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
 		USB_USBTask();
 	}
@@ -167,7 +167,7 @@ void SetupHardware(void)
 	OCR0A  = (F_CPU / 64 / 1000);
 	TCCR0A = (1 << WGM01);
 	TCCR0B = ((1 << CS01) | (1 << CS00));
-	
+
 	/* Tristate target /RESET Line */
 	AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
 	AVR_RESET_LINE_DDR  &= ~AVR_RESET_LINE_MASK;
@@ -216,10 +216,10 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 	switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
 	{
 		case CDC_PARITY_Odd:
-			ConfigMask = ((1 << UPM11) | (1 << UPM10));		
+			ConfigMask = ((1 << UPM11) | (1 << UPM10));
 			break;
 		case CDC_PARITY_Even:
-			ConfigMask = (1 << UPM11);		
+			ConfigMask = (1 << UPM11);
 			break;
 	}
 
@@ -238,7 +238,7 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 			ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
 			break;
 	}
-	
+
 	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
 	UCSR1B = 0;
 	UCSR1A = 0;
@@ -246,10 +246,10 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 
 	/* Set the new baud rate before configuring the USART */
 	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
-	
+
 	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
 	UCSR1C = ConfigMask;
-	UCSR1A = (1 << U2X1);	
+	UCSR1A = (1 << U2X1);
 	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
 }
 
@@ -276,10 +276,11 @@ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const C
 	if (!(PreviousDTRState) && CurrentDTRState)
 	{
 		LEDs_SetAllLEDs(LEDMASK_BUSY);
-	
+
 		AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK;
 		PulseMSRemaining.ResetPulse = AVR_RESET_PULSE_MS;
 	}
-	
+
 	PreviousDTRState = CurrentDTRState;
 }
+