Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

7 files changed, 147 insertions, 140 deletions

diff --git a/Projects/Benito/Benito.c b/Projects/Benito/Benito.c
index a9afda4a3..735d7346b 100644
--- a/Projects/Benito/Benito.c
+++ b/Projects/Benito/Benito.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -60,7 +60,7 @@ uint8_t FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
  */
 USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 	{
-		.Config = 
+		.Config =
 			{
 				.ControlInterfaceNumber         = 0,
 
@@ -84,9 +84,9 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
 int main(void)
 {
 	SetupHardware();
-	
+
 	RingBuffer_InitBuffer(&Tx_Buffer);
-	
+
 	sei();
 
 	for (;;)
@@ -98,9 +98,9 @@ int main(void)
 			UDR1 = ReceivedByte;
 
 			LEDs_TurnOnLEDs(LEDMASK_TX);
-			PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;			
+			PulseMSRemaining.TxLEDPulse = TX_RX_LED_PULSE_MS;
 		}
-		
+
 		/* Check if the millisecond timer has elapsed */
 		if (TIFR0 & (1 << OCF0A))
 		{
@@ -110,14 +110,14 @@ int main(void)
 				LEDs_TurnOffLEDs(LEDMASK_BUSY);
 				AVR_RESET_LINE_DDR &= ~AVR_RESET_LINE_MASK;
 			}
-			
+
 			/* Check if the LEDs should be ping-ponging (during enumeration) */
 			if (PulseMSRemaining.PingPongLEDPulse && !(--PulseMSRemaining.PingPongLEDPulse))
 			{
 				LEDs_ToggleLEDs(LEDMASK_TX | LEDMASK_RX);
 				PulseMSRemaining.PingPongLEDPulse = PING_PONG_LED_PULSE_MS;
 			}
-		
+
 			/* Turn off TX LED(s) once the TX pulse period has elapsed */
 			if (PulseMSRemaining.TxLEDPulse && !(--PulseMSRemaining.TxLEDPulse))
 			  LEDs_TurnOffLEDs(LEDMASK_TX);
@@ -139,14 +139,14 @@ int main(void)
 					LEDs_TurnOnLEDs(LEDMASK_RX);
 					PulseMSRemaining.RxLEDPulse = TX_RX_LED_PULSE_MS;
 				}
-				
+
 				FlushPeriodRemaining = RECEIVE_BUFFER_FLUSH_MS;
 			}
 
 			/* Clear the millisecond timer CTC flag (cleared by writing logic one to the register) */
-			TIFR0 |= (1 << OCF0A);		
+			TIFR0 |= (1 << OCF0A);
 		}
-		
+
 		CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
 		USB_USBTask();
 	}
@@ -167,7 +167,7 @@ void SetupHardware(void)
 	OCR0A  = (F_CPU / 64 / 1000);
 	TCCR0A = (1 << WGM01);
 	TCCR0B = ((1 << CS01) | (1 << CS00));
-	
+
 	/* Tristate target /RESET Line */
 	AVR_RESET_LINE_PORT &= ~AVR_RESET_LINE_MASK;
 	AVR_RESET_LINE_DDR  &= ~AVR_RESET_LINE_MASK;
@@ -216,10 +216,10 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 	switch (CDCInterfaceInfo->State.LineEncoding.ParityType)
 	{
 		case CDC_PARITY_Odd:
-			ConfigMask = ((1 << UPM11) | (1 << UPM10));		
+			ConfigMask = ((1 << UPM11) | (1 << UPM10));
 			break;
 		case CDC_PARITY_Even:
-			ConfigMask = (1 << UPM11);		
+			ConfigMask = (1 << UPM11);
 			break;
 	}
 
@@ -238,7 +238,7 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 			ConfigMask |= ((1 << UCSZ11) | (1 << UCSZ10));
 			break;
 	}
-	
+
 	/* Must turn off USART before reconfiguring it, otherwise incorrect operation may occur */
 	UCSR1B = 0;
 	UCSR1A = 0;
@@ -246,10 +246,10 @@ void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCI
 
 	/* Set the new baud rate before configuring the USART */
 	UBRR1  = SERIAL_2X_UBBRVAL(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
-	
+
 	/* Reconfigure the USART in double speed mode for a wider baud rate range at the expense of accuracy */
 	UCSR1C = ConfigMask;
-	UCSR1A = (1 << U2X1);	
+	UCSR1A = (1 << U2X1);
 	UCSR1B = ((1 << RXCIE1) | (1 << TXEN1) | (1 << RXEN1));
 }
 
@@ -276,10 +276,11 @@ void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const C
 	if (!(PreviousDTRState) && CurrentDTRState)
 	{
 		LEDs_SetAllLEDs(LEDMASK_BUSY);
-	
+
 		AVR_RESET_LINE_DDR |= AVR_RESET_LINE_MASK;
 		PulseMSRemaining.ResetPulse = AVR_RESET_PULSE_MS;
 	}
-	
+
 	PreviousDTRState = CurrentDTRState;
 }
+
diff --git a/Projects/Benito/Benito.h b/Projects/Benito/Benito.h
index 34bc797ed..974956993 100644
--- a/Projects/Benito/Benito.h
+++ b/Projects/Benito/Benito.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -56,10 +56,10 @@
 
 		/** LED mask for the library LED driver, to indicate RX activity. */
 		#define LEDMASK_RX               LEDS_LED2
-		
+
 		/** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */
 		#define LEDMASK_ERROR            (LEDS_LED1 | LEDS_LED2)
-		
+
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
 		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)
 
@@ -70,8 +70,9 @@
 		void EVENT_USB_Device_Disconnect(void);
 		void EVENT_USB_Device_ConfigurationChanged(void);
 		void EVENT_USB_Device_UnhandledControlRequest(void);
-		
+
 		void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
 		void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo);
-		
+
 #endif
+
diff --git a/Projects/Benito/Benito.txt b/Projects/Benito/Benito.txt
index d7bf870e2..60d77cd4a 100644
--- a/Projects/Benito/Benito.txt
+++ b/Projects/Benito/Benito.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Benito Arduino Programmer Project
  *
  *  \section SSec_Compat Project Compatibility:
@@ -28,7 +28,7 @@
  *   <td><b>USB Class:</b></td>
  *   <td>Communications Device Class (CDC)</td>
  *  </tr>
- *  <tr> 
+ *  <tr>
  *   <td><b>USB Subclass:</b></td>
  *   <td>Abstract Control Model (ACM)</td>
  *  </tr>
@@ -43,7 +43,7 @@
  *  </tr>
  * </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section SSec_Description Project Description:
  *
  *  Firmware for a USB AVR powered programmer for Arduino boards using the official Arduino bootloader. This
  *  project acts like a regular USB to Serial bridge, except that asserting the DTR line will cause a pulse
@@ -103,3 +103,4 @@
  *   </tr>
  *  </table>
  */
+
diff --git a/Projects/Benito/Descriptors.c b/Projects/Benito/Descriptors.c
index fc9d5aba3..f4c68bab7 100644
--- a/Projects/Benito/Descriptors.c
+++ b/Projects/Benito/Descriptors.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -30,9 +30,9 @@
 
 /** \file
  *
- *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special 
+ *  USB Device Descriptors, for library use when in USB device mode. Descriptors are special
  *  computer-readable structures which the host requests upon device enumeration, to determine
- *  the device's capabilities and functions.  
+ *  the device's capabilities and functions.
  */
 
 #include "Descriptors.h"
@@ -45,22 +45,22 @@
 USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
 {
 	.Header                 = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
-		
+
 	.USBSpecification       = VERSION_BCD(01.10),
 	.Class                  = 0x02,
 	.SubClass               = 0x00,
 	.Protocol               = 0x00,
-				
+
 	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
-		
+
 	.VendorID               = 0x03EB,
 	.ProductID              = 0x2060,
 	.ReleaseNumber          = VERSION_BCD(00.01),
-		
+
 	.ManufacturerStrIndex   = 0x01,
 	.ProductStrIndex        = 0x02,
 	.SerialNumStrIndex      = USE_INTERNAL_SERIAL,
-		
+
 	.NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
 };
 
@@ -71,102 +71,102 @@ USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
  */
 USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 {
-	.Config = 
+	.Config =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
 
 			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
 			.TotalInterfaces        = 2,
-				
+
 			.ConfigurationNumber    = 1,
 			.ConfigurationStrIndex  = NO_DESCRIPTOR,
-				
+
 			.ConfigAttributes       = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
-			
+
 			.MaxPowerConsumption    = USB_CONFIG_POWER_MA(100)
 		},
-		
-	.CDC_CCI_Interface = 
+
+	.CDC_CCI_Interface =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
 
 			.InterfaceNumber        = 0,
 			.AlternateSetting       = 0,
-			
+
 			.TotalEndpoints         = 1,
-				
+
 			.Class                  = 0x02,
 			.SubClass               = 0x02,
 			.Protocol               = 0x01,
-				
+
 			.InterfaceStrIndex      = NO_DESCRIPTOR
 		},
 
-	.CDC_Functional_Header = 
+	.CDC_Functional_Header =
 		{
 			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
 			.Subtype                = CDC_DSUBTYPE_CSInterface_Header,
-			
+
 			.CDCSpecification       = VERSION_BCD(01.10),
 		},
 
-	.CDC_Functional_ACM = 
+	.CDC_Functional_ACM =
 		{
 			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
 			.Subtype                = CDC_DSUBTYPE_CSInterface_ACM,
-			
+
 			.Capabilities           = 0x06,
 		},
-		
-	.CDC_Functional_Union = 
+
+	.CDC_Functional_Union =
 		{
 			.Header                 = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
 			.Subtype                = CDC_DSUBTYPE_CSInterface_Union,
-			
+
 			.MasterInterfaceNumber  = 0,
 			.SlaveInterfaceNumber   = 1,
 		},
 
-	.CDC_NotificationEndpoint = 
+	.CDC_NotificationEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-			
+
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),
 			.Attributes             = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = CDC_NOTIFICATION_EPSIZE,
 			.PollingIntervalMS      = 0xFF
 		},
 
-	.CDC_DCI_Interface = 
+	.CDC_DCI_Interface =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
 
 			.InterfaceNumber        = 1,
 			.AlternateSetting       = 0,
-			
+
 			.TotalEndpoints         = 2,
-				
+
 			.Class                  = 0x0A,
 			.SubClass               = 0x00,
 			.Protocol               = 0x00,
-				
+
 			.InterfaceStrIndex      = NO_DESCRIPTOR
 		},
 
-	.CDC_DataOutEndpoint = 
+	.CDC_DataOutEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-			
+
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = CDC_TXRX_EPSIZE,
 			.PollingIntervalMS      = 0x00
 		},
-		
-	.CDC_DataInEndpoint = 
+
+	.CDC_DataInEndpoint =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
-			
+
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
 			.EndpointSize           = CDC_TXRX_EPSIZE,
@@ -181,7 +181,7 @@ USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 USB_Descriptor_String_t PROGMEM LanguageString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
-		
+
 	.UnicodeString          = {LANGUAGE_ID_ENG}
 };
 
@@ -192,7 +192,7 @@ USB_Descriptor_String_t PROGMEM LanguageString =
 USB_Descriptor_String_t PROGMEM ManufacturerString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
-		
+
 	.UnicodeString          = L"Dean Camera"
 };
 
@@ -203,7 +203,7 @@ USB_Descriptor_String_t PROGMEM ManufacturerString =
 USB_Descriptor_String_t PROGMEM ProductString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(25), .Type = DTYPE_String},
-		
+
 	.UnicodeString          = L"Benito Arduino Programmer"
 };
 
@@ -225,34 +225,35 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
 
 	switch (DescriptorType)
 	{
-		case DTYPE_Device: 
+		case DTYPE_Device:
 			Address = &DeviceDescriptor;
 			Size    = sizeof(USB_Descriptor_Device_t);
 			break;
-		case DTYPE_Configuration: 
+		case DTYPE_Configuration:
 			Address = &ConfigurationDescriptor;
 			Size    = sizeof(USB_Descriptor_Configuration_t);
 			break;
-		case DTYPE_String: 
+		case DTYPE_String:
 			switch (DescriptorNumber)
 			{
-				case 0x00: 
+				case 0x00:
 					Address = &LanguageString;
 					Size    = pgm_read_byte(&LanguageString.Header.Size);
 					break;
-				case 0x01: 
+				case 0x01:
 					Address = &ManufacturerString;
 					Size    = pgm_read_byte(&ManufacturerString.Header.Size);
 					break;
-				case 0x02: 
+				case 0x02:
 					Address = &ProductString;
 					Size    = pgm_read_byte(&ProductString.Header.Size);
 					break;
 			}
-			
+
 			break;
 	}
-	
+
 	*DescriptorAddress = Address;
 	return Size;
 }
+
diff --git a/Projects/Benito/Descriptors.h b/Projects/Benito/Descriptors.h
index 361fe9032..ddd9495ea 100644
--- a/Projects/Benito/Descriptors.h
+++ b/Projects/Benito/Descriptors.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -32,7 +32,7 @@
  *
  *  Header file for Descriptors.c.
  */
- 
+
 #ifndef _DESCRIPTORS_H_
 #define _DESCRIPTORS_H_
 
@@ -47,10 +47,10 @@
 		#define CDC_NOTIFICATION_EPNUM         2
 
 		/** Endpoint number of the CDC device-to-host data IN endpoint. */
-		#define CDC_TX_EPNUM                   3	
+		#define CDC_TX_EPNUM                   3
 
 		/** Endpoint number of the CDC host-to-device data OUT endpoint. */
-		#define CDC_RX_EPNUM                   4	
+		#define CDC_RX_EPNUM                   4
 
 		/** Size in bytes of the CDC device-to-host notification IN endpoint. */
 		#define CDC_NOTIFICATION_EPSIZE        8
@@ -83,3 +83,4 @@
 		                                    ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
 
 #endif
+
diff --git a/Projects/Benito/Lib/LightweightRingBuff.h b/Projects/Benito/Lib/LightweightRingBuff.h
index 768e49a50..2fbc164cb 100644
--- a/Projects/Benito/Lib/LightweightRingBuff.h
+++ b/Projects/Benito/Lib/LightweightRingBuff.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -39,20 +39,20 @@
  *  or deletions) must not overlap. If there is possibility of two or more of the same kind of
  *  operating occuring at the same point in time, atomic (mutex) locking should be used.
  */
- 
+
 #ifndef _ULW_RING_BUFF_H_
 #define _ULW_RING_BUFF_H_
 
 	/* Includes: */
 		#include <util/atomic.h>
-	
+
 		#include <stdint.h>
 		#include <stdbool.h>
 
 	/* Defines: */
 		/** Size of each ring buffer, in data elements - must be between 1 and 255. */
 		#define BUFFER_SIZE         255
-		
+
 		/** Type of data to store into the buffer. */
 		#define RingBuff_Data_t     uint8_t
 
@@ -76,7 +76,7 @@
 			RingBuff_Data_t* Out; /**< Current retrieval location in the circular buffer */
 			RingBuff_Count_t Count;
 		} RingBuff_t;
-	
+
 	/* Inline Functions: */
 		/** Initializes a ring buffer ready for use. Buffers must be initialized via this function
 		 *  before any operations are called upon them. Already initialized buffers may be reset
@@ -92,7 +92,7 @@
 				Buffer->Out = Buffer->Buffer;
 			}
 		}
-		
+
 		/** Retrieves the minimum number of bytes stored in a particular buffer. This value is computed
 		 *  by entering an atomic lock on the buffer while the IN and OUT locations are fetched, so that
 		 *  the buffer cannot be modified while the computation takes place. This value should be cached
@@ -109,15 +109,15 @@
 		static inline RingBuff_Count_t RingBuffer_GetCount(RingBuff_t* const Buffer)
 		{
 			RingBuff_Count_t Count;
-			
+
 			ATOMIC_BLOCK(ATOMIC_RESTORESTATE)
 			{
 				Count = Buffer->Count;
 			}
-			
+
 			return Count;
 		}
-		
+
 		/** Atomically determines if the specified ring buffer contains any free space. This should
 		 *  be tested before storing data to the buffer, to ensure that no data is lost due to a
 		 *  buffer overrun.
@@ -125,7 +125,7 @@
 		 *  \param[in,out] Buffer  Pointer to a ring buffer structure to insert into
 		 *
 		 *  \return Boolean true if the buffer contains no free space, false otherwise
-		 */		 
+		 */
 		static inline bool RingBuffer_IsFull(RingBuff_t* const Buffer)
 		{
 			return (RingBuffer_GetCount(Buffer) == BUFFER_SIZE);
@@ -142,7 +142,7 @@
 		 *  \param[in,out] Buffer  Pointer to a ring buffer structure to insert into
 		 *
 		 *  \return Boolean true if the buffer contains no free space, false otherwise
-		 */		 
+		 */
 		static inline bool RingBuffer_IsEmpty(RingBuff_t* const Buffer)
 		{
 			return (RingBuffer_GetCount(Buffer) == 0);
@@ -161,7 +161,7 @@
 		                                     const RingBuff_Data_t Data)
 		{
 			*Buffer->In = Data;
-			
+
 			if (++Buffer->In == &Buffer->Buffer[BUFFER_SIZE])
 			  Buffer->In = Buffer->Buffer;
 
@@ -184,7 +184,7 @@
 		static inline RingBuff_Data_t RingBuffer_Remove(RingBuff_t* const Buffer)
 		{
 			RingBuff_Data_t Data = *Buffer->Out;
-			
+
 			if (++Buffer->Out == &Buffer->Buffer[BUFFER_SIZE])
 			  Buffer->Out = Buffer->Buffer;
 
@@ -192,8 +192,9 @@
 			{
 				Buffer->Count--;
 			}
-			
+
 			return Data;
 		}
 
 #endif
+
diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index b6432599e..535bdbdbb 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -64,14 +64,14 @@ MCU = atmega32u2
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
 BOARD = BENITO
 
 
 # Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency in Hz. You can then use this symbol in your source code to 
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
@@ -84,7 +84,7 @@ F_CPU = 8000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     This will define a symbol, F_CLOCK, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -144,7 +144,7 @@ SRC = $(TARGET).c                                                 \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = 
+CPPSRC =
 
 
 # List Assembler source files here.
@@ -157,7 +157,7 @@ CPPSRC =
 ASRC =
 
 
-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
@@ -271,7 +271,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
@@ -284,7 +284,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = 
+PRINTF_LIB =
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
@@ -296,7 +296,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = 
+SCANF_LIB =
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
@@ -308,7 +308,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
+EXTRALIBDIRS =
 
 
 
@@ -331,7 +331,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax 
+LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@@ -365,7 +365,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
@@ -399,7 +399,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
@@ -428,7 +428,7 @@ WINSHELL = cmd
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -447,10 +447,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 
 # Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 
 
 # Compiler flags to generate dependency files.
@@ -515,11 +515,11 @@ sizeafter:
 
 
 # Display compiler version information.
-gccversion : 
+gccversion :
 	@$(CC) --version
 
 
-# Program the device.  
+# Program the device.
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
@@ -546,9 +546,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
 
 
 # Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set
 #     a breakpoint at main().
-gdb-config: 
+gdb-config:
 	@$(REMOVE) $(GDBINIT_FILE)
 	@echo define reset >> $(GDBINIT_FILE)
 	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -646,14 +646,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
 	@echo
 	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
 	@echo
 	@echo $(MSG_COMPILING_CPP) $<
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
 
 
 # Compile: create assembler files from C source files.
@@ -675,7 +675,7 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 
 
 # Target: clean project.
@@ -719,3 +719,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 debug gdb-config
+