Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

26 files changed, 90 insertions, 76 deletions

diff --git a/LUFA/ManPages/AboutLUFA.txt b/LUFA/ManPages/AboutLUFA.txt
index 7728347c6..c7374bce6 100644
--- a/LUFA/ManPages/AboutLUFA.txt
+++ b/LUFA/ManPages/AboutLUFA.txt
@@ -17,4 +17,4 @@
  *  \li \subpage Page_FutureChanges - Planned Changes to the Library
  *  \li \subpage Page_LUFAPoweredProjects - Other Projects Using LUFA
  */
- 
\ No newline at end of file
+
diff --git a/LUFA/ManPages/AlternativeStacks.txt b/LUFA/ManPages/AlternativeStacks.txt
index a1ba858da..f9d6cbbcd 100644
--- a/LUFA/ManPages/AlternativeStacks.txt
+++ b/LUFA/ManPages/AlternativeStacks.txt
@@ -42,8 +42,8 @@
  *    <b>Website:</b> http://www.pjrc.com/teensy/usb_debug_only.html \n
  *    <b>Description:</b> Not so much a complete stack as a collection of USB enabled demos, this library is specifically
  *                        designed for the PJRC Teensy line of USB AVRs, and thus may need to be modified for other USB AVR
- *                        chips. These minimal code samples shows the inner workings of the USB controller, without all the 
- *                        abstraction present in most other USB AVR stacks. 
+ *                        chips. These minimal code samples shows the inner workings of the USB controller, without all the
+ *                        abstraction present in most other USB AVR stacks.
  *
  *  \section Sec_SoftwareStacks Software AVR Stacks
  *  These are the known alternative USB stacks which can run on regular AVR models, lacking dedicated hardware USB controllers
@@ -66,4 +66,4 @@
  *                        Used in many commercial and non-commercial designs, with user-submitted projects available for viewing
  *                        on the company's website. Uses C language code mixed with assembly for time-critical sections.
  */
- 
+
diff --git a/LUFA/ManPages/BuildingLinkableLibraries.txt b/LUFA/ManPages/BuildingLinkableLibraries.txt
index 70919c0a2..e5782df9f 100644
--- a/LUFA/ManPages/BuildingLinkableLibraries.txt
+++ b/LUFA/ManPages/BuildingLinkableLibraries.txt
@@ -20,3 +20,4 @@
  *  demonstrated in the library demos and applications. This is the preferred method, as the library is recompiled
  *  each time to ensure that all static options for a particular application are applied.
  */
+
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index a15fe828a..68e3826f3 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -208,7 +208,7 @@
   *    read (thanks to Andrei Krainev)
   *  - Fixed device state not being reset back to the default state if the host sets the address to 0
   *  - Fixed Set Configuration requests not being stalled until the host has set the device's address
-  *  - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the 
+  *  - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the
   *    HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set
   *  - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occurring while the control endpoint
   *    request is being processed, causing possible lockups if a USB interrupt occurs during a transfer
@@ -323,7 +323,7 @@
   *  - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a
   *    STALL to a GET MAX LUN request (thanks to Martin Luxen)
   *  - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting
-  *  - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow 
+  *  - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow
   *    devices from timing out the data pipes
   *  - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts
   *  - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing
@@ -400,7 +400,7 @@
   *  - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen
   *  - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID
   *  - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin)
-  *  
+  *
   *  <b>Changed:</b>
   *  - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested
   *    HID interface within the device, not all HID interfaces
@@ -479,7 +479,7 @@
   *  - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions
   *  - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options
   *  - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs
-  *  
+  *
   *  <b>Changed:</b>
   *  - Deprecated pseudo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)
   *  - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested
@@ -635,7 +635,7 @@
   *  - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button
   *  - Serial driver now correctly calculates the baud register value when in double speed mode
   *  - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values
-  *    
+  *
   *
   *  \section Sec_ChangeLog090401 Version 090401
   *
@@ -757,9 +757,9 @@
   *  - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library
   *  - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset
   *  - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices
-  *  - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver  
+  *  - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver
   *  - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster
-  *  - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal 
+  *  - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal
   *    right-handed system
   *  - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in
   *    the demos, but the example code and supporting defines are now in place
@@ -814,7 +814,7 @@
   *  - All HID demos now pass the USB.org automated HID compliance tests
   *  - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems
   *  - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks
-  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions		
+  *  - Mass Storage demo dataflash management routines changed to use the endpoint stream functions
   *  - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file
   *  - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
   *    are reflected in the hardware (change was previously lost)
@@ -950,7 +950,7 @@
   *
   *  - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
   *    are reflected in the hardware
-  *  - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the 
+  *  - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the
   *    GetLineCoding request had an incorrect RequestType mask preventing it from being processed
   *  - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full
   *  - Device control endpoint size is now determined from the device's descriptors rather than being fixed
@@ -1057,6 +1057,7 @@
   *  - ID transition interrupt now raises the appropriate device/host disconnect event if device attached
   *  - Fixed double VBUS change (and VBUS -) event when detaching in device mode
   *  - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile
-  *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and 
+  *  - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and
   *    Endpoint_IsConfigured() after calling the config functions to determine success
   */
+
diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt
index d74cb4314..f74898452 100644
--- a/LUFA/ManPages/CompileTimeTokens.txt
+++ b/LUFA/ManPages/CompileTimeTokens.txt
@@ -30,7 +30,7 @@
  *  Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol
  *  mode can be removed to save space in the compiled application by defining this token. When defined, it is still necessary
  *  to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol().
- * 
+ *
  *  <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - ( \ref Group_HIDParser ) \n
  *  HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This
  *  allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous
@@ -203,3 +203,4 @@
  *  back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device
  *  settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.
  */
+
diff --git a/LUFA/ManPages/CompilingApps.txt b/LUFA/ManPages/CompilingApps.txt
index 60c5a8ae2..45cbdd678 100644
--- a/LUFA/ManPages/CompilingApps.txt
+++ b/LUFA/ManPages/CompilingApps.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \page Page_CompilingApps Compiling the Demos, Bootloaders and Projects
  *
  *  The following details how to compile the included LUFA demos, applications and bootloaders using AVR-GCC.
@@ -27,4 +27,4 @@
  *  files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the resulting binary will
  *  be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM variables, the generated ".EEP"
  *  file will contain the project's EEPROM data.
- */
\ No newline at end of file
+ */
diff --git a/LUFA/ManPages/ConfiguringApps.txt b/LUFA/ManPages/ConfiguringApps.txt
index f601efacf..e5ce9fd51 100644
--- a/LUFA/ManPages/ConfiguringApps.txt
+++ b/LUFA/ManPages/ConfiguringApps.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects
  *
  *  If the target AVR model, clock speed, board or other settings are different from the current settings, they must be changed
@@ -86,4 +86,4 @@
  *  model and cannot be made to function through the altering of the makefile settings alone (or at all). Settings such as the USB mode (device, host or both),
  *  the USB interface speed (Low or Full speed) and other LUFA configuration options can be set here - see \ref Page_TokenSummary documentation for details
  *  on the available LUFA compile time configuration options.
- */
\ No newline at end of file
+ */
diff --git a/LUFA/ManPages/DevelopingWithLUFA.txt b/LUFA/ManPages/DevelopingWithLUFA.txt
index 695d36c51..4ea379938 100644
--- a/LUFA/ManPages/DevelopingWithLUFA.txt
+++ b/LUFA/ManPages/DevelopingWithLUFA.txt
@@ -18,4 +18,4 @@
  *  \li \subpage Page_WritingBoardDrivers - How to Write Custom Board Drivers
  *  \li \subpage Page_SoftwareBootloaderStart - How to jump to the bootloader in software
  */
- 
\ No newline at end of file
+
diff --git a/LUFA/ManPages/DeviceSupport.txt b/LUFA/ManPages/DeviceSupport.txt
index 76d32d4fa..b9a0e5170 100644
--- a/LUFA/ManPages/DeviceSupport.txt
+++ b/LUFA/ManPages/DeviceSupport.txt
@@ -44,4 +44,4 @@
  *   - Arduino Uno
  *   - Any Other Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
  */
- 
\ No newline at end of file
+
diff --git a/LUFA/ManPages/DirectorySummaries.txt b/LUFA/ManPages/DirectorySummaries.txt
index bb7460321..36ba26d65 100644
--- a/LUFA/ManPages/DirectorySummaries.txt
+++ b/LUFA/ManPages/DirectorySummaries.txt
@@ -6,30 +6,30 @@
 
 /** \dir LUFA/Common
  *  \brief Common library header files.
- *  
+ *
  *  This folder contains header files which are common to all parts of the LUFA library. They may be used freely in
  *  user applications.
  *
  *  \dir LUFA/Drivers
  *  \brief Library hardware and software drivers.
- *  
+ *
  *  This folder contains all the library hardware and software drivers for each supported board and USB AVR
  *  microcontroller model.
- * 
+ *
  *  \dir LUFA/Drivers/Misc
  *  \brief Miscellaneous driver files.
- *  
+ *
  *  This folder contains drivers for aspects other than the USB interface, board hardware or AVR peripherals.
- * 
+ *
  *  \dir LUFA/Drivers/Peripheral
  *  \brief USB AVR peripheral driver files.
- *  
+ *
  *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible with
  *  all USB AVR models.
  *
  *  \dir LUFA/Drivers/Peripheral/AVRU4U6U7
  *  \brief AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 AVR model peripheral driver files.
- *  
+ *
  *  This folder contains drivers for several of the AVR internal peripherals such as the USART, compatible only with
  *  the AT90USBXXX6, AT90USBXXX7 and ATMEGAXXU4 USB AVR models, such as the AT90USB1287. Its contents should <b>not</b> be
  *  included by the user application - the dispatch header file located in the parent directory should be used
@@ -37,7 +37,7 @@
  *
  *  \dir LUFA/Drivers/USB
  *  \brief USB controller peripheral driver files.
- *  
+ *
  *  This folder contains the main header files required to implement the USB interface in the USB supporting AVR models.
  *  The header files contained directly in this folder should be included in the user application in order to gain USB
  *  functionality, and the appropriate C source files in the LowLevel and HighLevel driver folders added to the compile
@@ -45,147 +45,148 @@
  *
  *  \dir LUFA/Drivers/USB/LowLevel
  *  \brief Low level USB driver files.
- *  
+ *
  *  This folder contains low level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
  *
  *  \dir LUFA/Drivers/USB/HighLevel
  *  \brief High level USB driver files.
- *  
+ *
  *  This folder contains high level USB driver source files required to implement USB functionality on the USB AVR microcontrollers.
  *
  *  \dir LUFA/Drivers/USB/Class
  *  \brief USB Class helper driver files.
- *  
+ *
  *  This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,
  *  but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive
  *  development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.
  *
  *  \dir LUFA/Drivers/USB/Class/Device
  *  \brief USB Device Class helper driver files.
- *  
+ *
  *  Device mode drivers for the standard USB classes.
  *
  *  \dir LUFA/Drivers/USB/Class/Host
  *  \brief USB Host Class helper driver files.
- *  
+ *
  *  Host mode drivers for the standard USB classes.
  *
  *  \dir LUFA/Drivers/Board
  *  \brief Board hardware driver files.
- *  
+ *
  *  This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from
  *  the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of
  *  hardware placed on supported boards.
  *
  *  \dir LUFA/Drivers/Board/USBKEY
  *  \brief USBKEY board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Atmel USBKEY demonstration board. The header files in this folder should
  *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
  *  should be included instead.
  *
  *  \dir LUFA/Drivers/Board/STK526
  *  \brief STK526 board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Atmel STK526 development board. The header files in this folder should
  *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
  *  should be included instead.
  *
  *  \dir LUFA/Drivers/Board/STK525
  *  \brief STK525 board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Atmel STK525 development board. The header files in this folder should
  *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
  *  should be included instead.
  *
  *  \dir LUFA/Drivers/Board/RZUSBSTICK
  *  \brief RZUSBSTICK board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Atmel RZUSBSTICK board, as used in the Atmel "Raven" wireless kits. The header
  *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
  *  the parent Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/ATAVRUSBRF01
  *  \brief ATAVRUSBRF01 board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Atmel ATAVRUSBRF01 board, as used in several Atmel wireless demo kits. The header
  *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
  *  the parent Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/BUMBLEB
  *  \brief BUMBLEB board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Fletchtronics Bumble-B board (http://fletchtronics.net/bumble-b). The header
  *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located in
  *  the parent Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/XPLAIN
  *  \brief XPLAIN board hardware driver files.
- *  
- *  This folder contains drivers for hardware on the Atmel XPLAIN board (all hardware revisions). The header files in this folder 
- *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board 
+ *
+ *  This folder contains drivers for hardware on the Atmel XPLAIN board (all hardware revisions). The header files in this folder
+ *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board
  *  directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/EVK527
  *  \brief XPLAIN board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Atmel EVK527 development board. The header files in this folder should
  *  not be included directly in user applications; the similarly named dispatch header files located in the parent Board directory
  *  should be included instead.
  *
  *  \dir LUFA/Drivers/Board/TEENSY
  *  \brief TEENSY board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on all revisions of the PJRC Teensy boards (http://www.pjrc.com/teensy/). The header
  *  files in this folder should not be included directly in user applications; the similarly named dispatch header files located
  *  in the parent Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/USBTINYMKII
  *  \brief USBTINY-MKII board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on all revisions of the USBTINY-MKII boards (http://tom-itx.dyndns.org:81/~webpage/).
  *  The header files in this folder should not be included directly in user applications; the similarly named dispatch header files
  *  located in the parent Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/BENITO
  *  \brief BENITO board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Benito boards (http://dorkbotpdx.org/wiki/benito). The header files in this
  *  folder should not be included directly in user applications; the similarly named dispatch header files located in the parent
  *  Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/JMDBU2
  *  \brief JM-DB-U2 board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the JM-DB-U2 boards (http://u2.mattair.net/). The header files in this folder
  *  should not be included directly in user applications; the similarly named dispatch header files located in the parent Board
  *  directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/OLIMEX162
  *  \brief Olimex USB-STK-162 board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the Olimex AVR-USB-162 boards (http://www.olimex.com/dev/avr-usb-162.html).
  *  The header files in this folder should not be included directly in user applications; the similarly named dispatch header files
  *  located in the parent Board directory should be included instead.
  *
  *  \dir LUFA/Drivers/Board/USBFOO
  *  \brief USBFOO board hardware driver files.
- *  
+ *
  *  This folder contains drivers for hardware on the USBFOO boards (http://shop.kernelconcepts.de/product_info.php?products_id=102).
  *  The header files in this folder should not be included directly in user applications; the similarly named dispatch header files
  *  located in the parent Board directory should be included instead.
  *
  *  \dir LUFA/CodeTemplates
  *  \brief Code templates for use in LUFA powered applications.
- *  
+ *
  *  This contains code templates for board drivers, sample LUFA project makefiles and other similar templates that can be copied into
  *  a LUFA powered application and modified to speed up development.
  *
  *  \dir LUFA/CodeTemplates/DriverStubs
  *  \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.
- *  
+ *
  *  This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those
  *  directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files
  *  copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,
  *  the corresponding LUFA board APIs will work correctly with the non-standard board hardware.
  */
+
diff --git a/LUFA/ManPages/Donating.txt b/LUFA/ManPages/Donating.txt
index 8a4d601ad..6e476c827 100644
--- a/LUFA/ManPages/Donating.txt
+++ b/LUFA/ManPages/Donating.txt
@@ -21,4 +21,4 @@
  *  \image html "http://www.pledgie.com/campaigns/6927.png?skin_name=chrome"
  *  <a href='http://www.pledgie.com/campaigns/6927'>Donate to this project via PayPal</a> - Thanks in Advance!
  */
- 
+
diff --git a/LUFA/ManPages/FutureChanges.txt b/LUFA/ManPages/FutureChanges.txt
index a6f52d119..15d5df492 100644
--- a/LUFA/ManPages/FutureChanges.txt
+++ b/LUFA/ManPages/FutureChanges.txt
@@ -40,3 +40,4 @@
   *      -# Atmel ARM7 series microcontrollers
   *      -# Other (commercial) C compilers
   */
+
diff --git a/LUFA/ManPages/GettingStarted.txt b/LUFA/ManPages/GettingStarted.txt
index c161bfe1f..ab460cb6e 100644
--- a/LUFA/ManPages/GettingStarted.txt
+++ b/LUFA/ManPages/GettingStarted.txt
@@ -24,3 +24,4 @@
  *  \li \subpage Page_CompilingApps - How to Compile the Included Demos, Projects and Bootloaders
  *  \li \subpage Page_ProgrammingApps - How to Program an AVR with the Included Demos, Projects and Bootloaders
  */
+
diff --git a/LUFA/ManPages/Groups.txt b/LUFA/ManPages/Groups.txt
index a204412e1..0c9f4a657 100644
--- a/LUFA/ManPages/Groups.txt
+++ b/LUFA/ManPages/Groups.txt
@@ -13,8 +13,9 @@
  *
  *  Functions, macros, variables, enums and types related to the control of AVR subsystems.
  */
- 
+
 /** @defgroup Group_MiscDrivers Miscellaneous Drivers
  *
  *  Miscellaneous driver Functions, macros, variables, enums and types.
  */
+
diff --git a/LUFA/ManPages/LUFAPoweredProjects.txt b/LUFA/ManPages/LUFAPoweredProjects.txt
index f1cf03135..1e41d5353 100644
--- a/LUFA/ManPages/LUFAPoweredProjects.txt
+++ b/LUFA/ManPages/LUFAPoweredProjects.txt
@@ -28,7 +28,7 @@
  *  - Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
  *  - U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/
  *  - USBFOO 2, AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
- * 
+ *
  *  \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)
  *
  *  The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library
@@ -70,7 +70,7 @@
  *  - USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001
  *  - Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/
  *  - XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/
- * 
+ *
  *  \section Sec_LUFACommercialProjects Projects Using LUFA (Commercial)
  *
  *  The following is a list of known commercial products using LUFA. Some of these are open source, although many are "black-box"
@@ -91,4 +91,4 @@
  *  - Elektor Magazine, "USB is Cool/Sucks" by Jerry Jacobs and Chris Vossen (minor mention), January 2010 Issue
  *  - Elektor Magazine, "20 x Open Source" by Jens Nickel, March 2010 Issue
  *  - Circuit Cellar Magazine, "Advanced USB Design Debugging" by Collin O'Flynn, August 2010 Issue
- */
\ No newline at end of file
+ */
diff --git a/LUFA/ManPages/LUFAvsAtmelStack.txt b/LUFA/ManPages/LUFAvsAtmelStack.txt
index 1eb6d008c..b4fce2df0 100644
--- a/LUFA/ManPages/LUFAvsAtmelStack.txt
+++ b/LUFA/ManPages/LUFAvsAtmelStack.txt
@@ -43,4 +43,4 @@
  *    As many people are now using LUFA, there is a community being built around it. You can get answers to your LUFA related questions
  *    quickly by either emailing the library author (subject to author's schedule) or by posting to the official LUFA support mailing list.
  */
- 
+
diff --git a/LUFA/ManPages/LibraryApps.txt b/LUFA/ManPages/LibraryApps.txt
index 2a6159af3..0f64345f9 100644
--- a/LUFA/ManPages/LibraryApps.txt
+++ b/LUFA/ManPages/LibraryApps.txt
@@ -75,7 +75,7 @@
  *        - <b>StillImageHost</b> - Still Image Camera host demo, using the library USB Still Image Class driver framework
  *        - <b>VirtualSerialHost</b> - Virtual Serial Port host demo, using the library USB CDC Class driver framework
  *      - <b>LowLevel</b>
- *        - <b>JoystickHostWithParser</b> - Joystick host demo with HID Descriptor parser, using the low level LUFA APIs to implement 
+ *        - <b>JoystickHostWithParser</b> - Joystick host demo with HID Descriptor parser, using the low level LUFA APIs to implement
  *                                          the USB HID class
  *        - <b>GenericHIDHost</b> - Generic HID host demo, using the low level LUFA APIs to implement the USB HID class
  *        - <b>KeyboardHost</b> - USB Keyboard host demo, using the low level LUFA APIs to implement the USB HID class
@@ -113,3 +113,4 @@
  *
  *  </small>
  */
+
diff --git a/LUFA/ManPages/LibraryResources.txt b/LUFA/ManPages/LibraryResources.txt
index 10f98d90d..14c24048a 100644
--- a/LUFA/ManPages/LibraryResources.txt
+++ b/LUFA/ManPages/LibraryResources.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /**
  *  \page Page_Resources Library Resources
  *
@@ -32,4 +32,4 @@
  *  \section Sec_USBResources USB Resources
  *  USB-IF Website: http://www.usb.org \n
  */
- 
+
diff --git a/LUFA/ManPages/LicenseInfo.txt b/LUFA/ManPages/LicenseInfo.txt
index 03b30a90b..447bec68c 100644
--- a/LUFA/ManPages/LicenseInfo.txt
+++ b/LUFA/ManPages/LicenseInfo.txt
@@ -19,3 +19,4 @@
  *
  *  \verbinclude License.txt
  */
+
diff --git a/LUFA/ManPages/MainPage.txt b/LUFA/ManPages/MainPage.txt
index f8cd2e576..533591a41 100644
--- a/LUFA/ManPages/MainPage.txt
+++ b/LUFA/ManPages/MainPage.txt
@@ -26,7 +26,7 @@
  *  both host and device modes. For information about the project progression, see the blog link at \ref Page_Resources.
  *
  *  LUFA is written specifically for the free AVR-GCC compiler, and uses several GCC-only extensions to make the
- *  library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package, 
+ *  library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package,
  *  from the the WinAVR website (see \ref Page_Resources).
  *
  *  The only required AVR peripherals for LUFA is the USB controller itself and interrupts - LUFA does not require the use of the
@@ -43,3 +43,4 @@
  *  \li \subpage Page_Donating - Donating to support this project
  *  \li \subpage Page_LibraryApps - Overview of included Demos, Bootloaders and Projects
  */
+
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 6f8c8642a..474e9f4c7 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -57,7 +57,7 @@
  *      be updated in all project makefiles, or the makefile should be updated to use the new module source variables.
  *    - The Drivers/USB/LowLevel/HostChapter9.h source file has moved to Drivers/USB/HighLevel/HostStandardReq.c - this should
  *      be updated in all project makefiles, or the makefile should be updated to use the new module source variables.
- *    - The Drivers/USB/LowLevel/LowLevel.c source file has moved to Drivers/LowLevel/USBController.c - this should be updated 
+ *    - The Drivers/USB/LowLevel/LowLevel.c source file has moved to Drivers/LowLevel/USBController.c - this should be updated
  *      in all project makefiles, or the makefile should be updated to use the new module source variables.
  *
  *  <b>Device Mode</b>
@@ -107,8 +107,8 @@
  *
  *  <b>Non-USB Library Components</b>
  *    - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models,
- *      the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used 
- *      when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function 
+ *      the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used
+ *      when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function
  *      is an exception, and should always be called with a channel number rather than a channel mask.
  *
  *  <b>Host Mode</b>
@@ -142,7 +142,7 @@
  *      indicate the report type to generate. Existing applications may simply add and ignore this additional parameter.
  *
  * \section Sec_Migration091122 Migrating from 090924 to 091122
- *  
+ *
  *  <b>Host Mode</b>
  *    - The HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow
  *    - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete HID_ReportItem_t to the
@@ -267,7 +267,7 @@
  *      library demos should update to the latest versions.
  *
  *  <b>Device Mode</b>
- *    - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT() 
+ *    - The Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the Endpoint_ClearIN(), Endpoint_ClearOUT()
  *      macros. See Endpoint.h documentation for more details on the new endpoint management macros.
  *    - The Endpoint_ReadWriteAllowed() macro has been renamed to Endpoint_IsReadWriteAllowed() to be more consistent with the rest of
  *      the API naming scheme.
@@ -339,7 +339,7 @@
  *
  *  <b>Device Mode</b>
  *    - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
- *      to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the 
+ *      to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the
  *      NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the FEATURELESS_CONTROL_ONLY_DEVICE token with no further
  *      modifications required.
  *
@@ -560,3 +560,4 @@
  *      finished enumerating the device. Projects relying on the event only firing in Host mode should be updated
  *      so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST.
  */
+
diff --git a/LUFA/ManPages/ProgrammingApps.txt b/LUFA/ManPages/ProgrammingApps.txt
index 4f3107502..c1b2181c8 100644
--- a/LUFA/ManPages/ProgrammingApps.txt
+++ b/LUFA/ManPages/ProgrammingApps.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \page Page_ProgrammingApps Programming an Application into a USB AVR
  *
  *  Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your
@@ -24,4 +24,4 @@
  *  If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.
  *  Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)
  *  alternative exists called "dfu-programmer".
- */
\ No newline at end of file
+ */
diff --git a/LUFA/ManPages/SoftwareBootloaderJump.txt b/LUFA/ManPages/SoftwareBootloaderJump.txt
index 574398c8f..2591a8645 100644
--- a/LUFA/ManPages/SoftwareBootloaderJump.txt
+++ b/LUFA/ManPages/SoftwareBootloaderJump.txt
@@ -30,7 +30,7 @@
  *
  *  #define MAGIC_BOOT_KEY            0xDC42ACCA
  *  #define BOOTLOADER_START_ADDRESS  (FLASH_SIZE_BYTES - BOOTLOADER_SEC_SIZE_BYTES)
- *  
+ *
  *  void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3);
  *  void Bootloader_Jump_Check(void)
  *  {
@@ -38,7 +38,7 @@
  *      if ((MCUSR & (1 << WDRF)) && (Boot_Key == MAGIC_BOOT_KEY))
  *      {
  *          Boot_Key = 0;
- *          ((void (*)(void))BOOTLOADER_START_ADDRESS)(); 
+ *          ((void (*)(void))BOOTLOADER_START_ADDRESS)();
  *      }
  *  }
  *
@@ -57,12 +57,13 @@
  *      // Set the bootloader key to the magic value and force a reset
  *      Boot_Key = MAGIC_BOOT_KEY;
  *      wdt_enable(WDTO_250MS);
- *      for (;;); 
+ *      for (;;);
  *  }
  *  \endcode
  *
  *  Note that the bootloader magic key can be any arbitrary value. The <em>FLASH_SIZE_BYTES</em> and
  *  <em>BOOTLOADER_SEC_SIZE_BYTES</em> tokens should be replaced with the total flash size of the AVR
  *  in bytes, and the allocated size of the bootloader section for the target AVR.
- * 
+ *
  */
+
diff --git a/LUFA/ManPages/VIDAndPIDValues.txt b/LUFA/ManPages/VIDAndPIDValues.txt
index 9f4183e26..0b88a0c71 100644
--- a/LUFA/ManPages/VIDAndPIDValues.txt
+++ b/LUFA/ManPages/VIDAndPIDValues.txt
@@ -421,3 +421,4 @@
  *  to be resolved by using a unique release number in the Device Descriptor. No devices using this
  *  VID/PID combination may be released to the general public.
  */
+
diff --git a/LUFA/ManPages/WhyUseLUFA.txt b/LUFA/ManPages/WhyUseLUFA.txt
index b6c93580b..7a90c67e1 100644
--- a/LUFA/ManPages/WhyUseLUFA.txt
+++ b/LUFA/ManPages/WhyUseLUFA.txt
@@ -43,4 +43,4 @@
  *   <small>* Atmel Stack Mouse Device Demo 4292 bytes, LUFA Mouse Low Level Device Demo 3332 bytes, under identical build
  *   environments</small>
  */
- 
+
diff --git a/LUFA/ManPages/WritingBoardDrivers.txt b/LUFA/ManPages/WritingBoardDrivers.txt
index dd0ea47c7..e09e7d0d9 100644
--- a/LUFA/ManPages/WritingBoardDrivers.txt
+++ b/LUFA/ManPages/WritingBoardDrivers.txt
@@ -24,3 +24,4 @@
  *  user board drivers, maintaining code compatibility and allowing for a different board to be selected through the
  *  project makefile with no code changes.
  */
+