More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.

22 files changed, 24 insertions, 24 deletions

diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index 11c31910a..02550a1db 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -99,7 +99,7 @@
 	
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate
+		/** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate
 		 *  I/O pins to an inputs with pull-ups enabled.
 		 *
 		 *  This must be called before any Button driver functions are used.
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index a3975e105..92eae7a8f 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -92,7 +92,7 @@
 			#define DATAFLASH_CHIP_MASK(index)      __GET_DATAFLASH_MASK(index)
 			
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void);
diff --git a/LUFA/Drivers/Board/EVK527/Dataflash.h b/LUFA/Drivers/Board/EVK527/Dataflash.h
index 612c67908..4440d76ba 100644
--- a/LUFA/Drivers/Board/EVK527/Dataflash.h
+++ b/LUFA/Drivers/Board/EVK527/Dataflash.h
@@ -85,7 +85,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 2953b72af..4119a9be5 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -90,7 +90,7 @@
 
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate
+		/** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate
 		 *  I/O pins to inputs with their pull-ups enabled.
 		 */
 		static inline void Joystick_Init(void);
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 07289bc16..b8e45559f 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -58,7 +58,7 @@
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D 
+ *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D 
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -133,7 +133,7 @@
 	
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+		/** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
 		 *  I/O pins as outputs, and sets the LEDs to default to off.
 		 */
 		static inline void LEDs_Init(void);
diff --git a/LUFA/Drivers/Board/STK525/Dataflash.h b/LUFA/Drivers/Board/STK525/Dataflash.h
index 2903e56bb..2a1f70714 100644
--- a/LUFA/Drivers/Board/STK525/Dataflash.h
+++ b/LUFA/Drivers/Board/STK525/Dataflash.h
@@ -85,7 +85,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/STK526/Dataflash.h b/LUFA/Drivers/Board/STK526/Dataflash.h
index c7b118ea5..cb412440c 100644
--- a/LUFA/Drivers/Board/STK526/Dataflash.h
+++ b/LUFA/Drivers/Board/STK526/Dataflash.h
@@ -85,7 +85,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index ddba7c798..d07446a67 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -87,7 +87,7 @@
 			#define TEMP_MAX_TEMP          ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET)
 		
 		/* Inline Functions: */
-			/** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
+			/** Initialises the temperature sensor driver, including setting up the appropriate ADC channel.
 			 *  This must be called before any other temperature sensor routines.
 			 *
 			 *  \pre The ADC itself (not the ADC channel) must be configured separately before calling the
diff --git a/LUFA/Drivers/Board/USBKEY/Dataflash.h b/LUFA/Drivers/Board/USBKEY/Dataflash.h
index b81510f0c..27ff34e07 100644
--- a/LUFA/Drivers/Board/USBKEY/Dataflash.h
+++ b/LUFA/Drivers/Board/USBKEY/Dataflash.h
@@ -88,7 +88,7 @@
 			#define DATAFLASH_PAGES                      8192
 			
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/XPLAIN/Dataflash.h
index 7e2719cf3..c1b8cd672 100644
--- a/LUFA/Drivers/Board/XPLAIN/Dataflash.h
+++ b/LUFA/Drivers/Board/XPLAIN/Dataflash.h
@@ -91,7 +91,7 @@
 			#endif
 			
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
index 835fee47e..098245d6d 100644
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
@@ -350,7 +350,7 @@
 				return ADC_GetResult();
 			}
 
-			/** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
+			/** Initialises the ADC, ready for conversions. This must be called before any other ADC operations.
 			 *  The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
 			 *  prescaler masks.
 			 *
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
index e2c3d6a10..511105985 100644
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
@@ -71,7 +71,7 @@
 
 	/* Public Interface - May be used in end-application: */
 		/* Inline Functions: */
-			/** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be
+			/** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be
 			 *  before any other TWI operations.
 			 */
 			static inline void TWI_Init(void) ATTR_ALWAYS_INLINE;
diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h
index 5bd7df448..c6db9f962 100644
--- a/LUFA/Drivers/Peripheral/SPI.h
+++ b/LUFA/Drivers/Peripheral/SPI.h
@@ -113,7 +113,7 @@
 			#define SPI_MODE_MASTER                (1 << MSTR)
 
 		/* Inline Functions: */
-			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
+			/** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other
 			 *  SPI routines.
 			 *
 			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the SPI_SPEED_*,
diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h
index 4eb74b9d2..23bbd6a4b 100644
--- a/LUFA/Drivers/Peripheral/Serial.h
+++ b/LUFA/Drivers/Peripheral/Serial.h
@@ -90,7 +90,7 @@
 			void Serial_TxString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1);
 
 		/* Inline Functions: */
-			/** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to
+			/** Initialises the USART, ready for serial data transmission and reception. This initialises the interface to
 			 *  standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
 			 *
 			 *  \param[in] BaudRate     Serial baud rate, in bits per second.
diff --git a/LUFA/Drivers/Peripheral/SerialStream.h b/LUFA/Drivers/Peripheral/SerialStream.h
index 9a40048f6..938d8f016 100644
--- a/LUFA/Drivers/Peripheral/SerialStream.h
+++ b/LUFA/Drivers/Peripheral/SerialStream.h
@@ -82,7 +82,7 @@
 
 	/* Public Interface - May be used in end-application: */
 		/* Inline Functions: */
-			/** Initializes the serial stream (and regular USART driver) so that both the stream and regular
+			/** Initialises the serial stream (and regular USART driver) so that both the stream and regular
 			 *  USART driver functions can be used. Must be called before any stream or regular USART functions.
 			 *
 			 *  \param[in] BaudRate     Baud rate to configure the USART to.
diff --git a/LUFA/Drivers/USB/Class/Common/RNDIS.h b/LUFA/Drivers/USB/Class/Common/RNDIS.h
index a6549c5e3..ab0126e24 100644
--- a/LUFA/Drivers/USB/Class/Common/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Common/RNDIS.h
@@ -96,7 +96,7 @@
 		/** Enum for the possible NDIS adapter states. */
 		enum RNDIS_States_t
 		{
-			RNDIS_Uninitialized    = 0, /**< Adapter currently uninitialized. */
+			RNDIS_Uninitialized    = 0, /**< Adapter currently uninitialised. */
 			RNDIS_Initialized      = 1, /**< Adapter currently initialized but not ready for data transfers. */
 			RNDIS_Data_Initialized = 2, /**< Adapter currently initialized and ready for data transfers. */
 		};
diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h
index 9ea3deae5..e733bfecd 100644
--- a/LUFA/Drivers/USB/Class/Device/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Device/MIDI.h
@@ -129,7 +129,7 @@
 
 
 			/** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the
-			 *  \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events.
+			 *  \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events.
 			 *
 			 *  \param[in,out] MIDIInterfaceInfo  Pointer to a structure containing a MIDI Class configuration and state.
 			 *
diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h
index 0d126b880..2cfb56e57 100644
--- a/LUFA/Drivers/USB/Class/Host/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Host/MIDI.h
@@ -143,7 +143,7 @@
 			                                  MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
 			/** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the
-			 *  \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the
+			 *  \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the
 			 *  pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI
 			 *  events to be packed into a single pipe packet, increasing data throughput.
 			 *
diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h
index 34bbbb183..b1518ffed 100644
--- a/LUFA/Drivers/USB/Class/Host/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h
@@ -158,7 +158,7 @@
 			 */
 			uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
+			/** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
 			 *  configured via the call to \ref RNDIS_Host_ConfigurePipes().
 			 *
 			 *  \param[in,out] RNDISInterfaceInfo  Pointer to a structure containing an RNDIS Class host configuration and state.
diff --git a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
index 61dda2cbc..001653b52 100644
--- a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
+++ b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
@@ -218,7 +218,7 @@
 			 *  function. The routine updates the position and remaining configuration descriptor bytes values
 			 *  automatically. If a comparator routine fails a search, the descriptor pointer is retreated back
 			 *  so that the next descriptor search invocation will start from the descriptor which first caused the
-			 *  original search to fail. This behavior allows for one comparator to be used immediately after another
+			 *  original search to fail. This behaviour allows for one comparator to be used immediately after another
 			 *  has failed, starting the second search from the descriptor which failed the first.
 			 *
 			 *  Comparator functions should be standard functions which accept a pointer to the header of the current
diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index 42b0ec7d8..5c295b61f 100644
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -189,7 +189,7 @@
 			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
 			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
 			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
 			 *        \n\n
@@ -207,7 +207,7 @@
 			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
 			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
 			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
 			 *        \n\n
diff --git a/LUFA/Drivers/USB/LowLevel/USBController.h b/LUFA/Drivers/USB/LowLevel/USBController.h
index f26f77360..f0db7faf4 100644
--- a/LUFA/Drivers/USB/LowLevel/USBController.h
+++ b/LUFA/Drivers/USB/LowLevel/USBController.h
@@ -264,7 +264,7 @@
 			 *                      Valid mode masks are \ref USB_MODE_DEVICE, \ref USB_MODE_HOST or \ref USB_MODE_UID.
 			 *
 			 *  \param[in] Options  Mask indicating the options which should be used when initializing the USB
-			 *                      interface to control the USB interface's behavior. This should be comprised of
+			 *                      interface to control the USB interface's behaviour. This should be comprised of
 			 *                      a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the
 			 *                      PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
 			 *                      mode speed.