More spell checking of all source files -- correct missed errors, switch to EN-GB spelling dictionary.

29 files changed, 44 insertions, 44 deletions

diff --git a/LUFA/Common/Attributes.h b/LUFA/Common/Attributes.h
index 220017a29..bcac84c7b 100644
--- a/LUFA/Common/Attributes.h
+++ b/LUFA/Common/Attributes.h
@@ -32,7 +32,7 @@
  *  \brief AVR-GCC special function/variable attribute macros.
  *
  *  This file contains macros for applying GCC specific attributes to functions and variables to control various
- *  optimizer and code generation features of the compiler. Attributes may be placed in the function prototype 
+ *  optimiser and code generation features of the compiler. Attributes may be placed in the function prototype 
  *  or variable declaration in any order, and multiple attributes can be specified for a single item via a space
  *  separated list.
  *
@@ -115,7 +115,7 @@
 				
 				/** Forces the compiler to not automatically zero the given global variable on startup, so that the
 				 *  current RAM contents is retained. Under most conditions this value will be random due to the
-				 *  behavior of volatile memory once power is removed, but may be used in some specific circumstances,
+				 *  behaviour of volatile memory once power is removed, but may be used in some specific circumstances,
 				 *  like the passing of values back after a system watchdog reset.
 				 */
 				#define ATTR_NO_INIT                __attribute__ ((section (".noinit")))
diff --git a/LUFA/Common/Common.h b/LUFA/Common/Common.h
index 350585946..4f2854385 100644
--- a/LUFA/Common/Common.h
+++ b/LUFA/Common/Common.h
@@ -80,7 +80,7 @@
 			#define MACROE                  while (0)
 			
 			/** Defines a volatile NOP statement which cannot be optimized out by the compiler, and thus can always
-			 *  be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer
+			 *  be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimiser
 			 *  removes/reorders code to the point where break points cannot reliably be set.
 			 *
 			 *  \ingroup Group_Debugging
@@ -127,7 +127,7 @@
 
 			/** Swaps the byte ordering of a 16-bit value at compile time. Do not use this macro for swapping byte orderings
 			 *  of dynamic values computed at runtime, use \ref SwapEndian_16() instead. The result of this macro can be used
-			 *  inside struct or other variable initializers outside of a function, something that is not possible with the
+			 *  inside struct or other variable initialisers outside of a function, something that is not possible with the
 			 *  inline function variant.
 			 *
 			 *  \param[in]  x  16-bit value whose byte ordering is to be swapped.
@@ -138,7 +138,7 @@
 
 			/** Swaps the byte ordering of a 32-bit value at compile time. Do not use this macro for swapping byte orderings
 			 *  of dynamic values computed at runtime- use \ref SwapEndian_32() instead. The result of this macro can be used
-			 *  inside struct or other variable initializers outside of a function, something that is not possible with the
+			 *  inside struct or other variable initialisers outside of a function, something that is not possible with the
 			 *  inline function variant.
 			 *
 			 *  \param[in]  x  32-bit value whose byte ordering is to be swapped.
diff --git a/LUFA/DriverStubs/Dataflash.h b/LUFA/DriverStubs/Dataflash.h
index c42062cc1..0df9ea11c 100644
--- a/LUFA/DriverStubs/Dataflash.h
+++ b/LUFA/DriverStubs/Dataflash.h
@@ -79,7 +79,7 @@
 			#define DATAFLASH_PAGES                      // TODO: Replace with the total number of pages inside one of the Dataflash ICs
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index 11c31910a..02550a1db 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -99,7 +99,7 @@
 	
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the BUTTONS driver, so that the current button position can be read. This sets the appropriate
+		/** Initialises the BUTTONS driver, so that the current button position can be read. This sets the appropriate
 		 *  I/O pins to an inputs with pull-ups enabled.
 		 *
 		 *  This must be called before any Button driver functions are used.
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index a3975e105..92eae7a8f 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -92,7 +92,7 @@
 			#define DATAFLASH_CHIP_MASK(index)      __GET_DATAFLASH_MASK(index)
 			
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void);
diff --git a/LUFA/Drivers/Board/EVK527/Dataflash.h b/LUFA/Drivers/Board/EVK527/Dataflash.h
index 612c67908..4440d76ba 100644
--- a/LUFA/Drivers/Board/EVK527/Dataflash.h
+++ b/LUFA/Drivers/Board/EVK527/Dataflash.h
@@ -85,7 +85,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index 2953b72af..4119a9be5 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -90,7 +90,7 @@
 
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate
+		/** Initialises the joystick driver so that the joystick position can be read. This sets the appropriate
 		 *  I/O pins to inputs with their pull-ups enabled.
 		 */
 		static inline void Joystick_Init(void);
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index 07289bc16..b8e45559f 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -58,7 +58,7 @@
  *
  *  \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
  *        a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- *        If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D 
+ *        If other behaviour is desired, either alias the remaining LED masks to existing LED masks via the -D 
  *        switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
  *        a non-existing LED is referenced in application code. Note that this means that it is possible to make
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
@@ -133,7 +133,7 @@
 	
 	/* Pseudo-Functions for Doxygen: */
 	#if defined(__DOXYGEN__)
-		/** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
+		/** Initialises the board LED driver so that the LEDs can be controlled. This sets the appropriate port
 		 *  I/O pins as outputs, and sets the LEDs to default to off.
 		 */
 		static inline void LEDs_Init(void);
diff --git a/LUFA/Drivers/Board/STK525/Dataflash.h b/LUFA/Drivers/Board/STK525/Dataflash.h
index 2903e56bb..2a1f70714 100644
--- a/LUFA/Drivers/Board/STK525/Dataflash.h
+++ b/LUFA/Drivers/Board/STK525/Dataflash.h
@@ -85,7 +85,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/STK526/Dataflash.h b/LUFA/Drivers/Board/STK526/Dataflash.h
index c7b118ea5..cb412440c 100644
--- a/LUFA/Drivers/Board/STK526/Dataflash.h
+++ b/LUFA/Drivers/Board/STK526/Dataflash.h
@@ -85,7 +85,7 @@
 			#define DATAFLASH_PAGES                      8192
 
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index ddba7c798..d07446a67 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -87,7 +87,7 @@
 			#define TEMP_MAX_TEMP          ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET)
 		
 		/* Inline Functions: */
-			/** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
+			/** Initialises the temperature sensor driver, including setting up the appropriate ADC channel.
 			 *  This must be called before any other temperature sensor routines.
 			 *
 			 *  \pre The ADC itself (not the ADC channel) must be configured separately before calling the
diff --git a/LUFA/Drivers/Board/USBKEY/Dataflash.h b/LUFA/Drivers/Board/USBKEY/Dataflash.h
index b81510f0c..27ff34e07 100644
--- a/LUFA/Drivers/Board/USBKEY/Dataflash.h
+++ b/LUFA/Drivers/Board/USBKEY/Dataflash.h
@@ -88,7 +88,7 @@
 			#define DATAFLASH_PAGES                      8192
 			
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Board/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/XPLAIN/Dataflash.h
index 7e2719cf3..c1b8cd672 100644
--- a/LUFA/Drivers/Board/XPLAIN/Dataflash.h
+++ b/LUFA/Drivers/Board/XPLAIN/Dataflash.h
@@ -91,7 +91,7 @@
 			#endif
 			
 		/* Inline Functions: */
-			/** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
+			/** Initialises the dataflash driver so that commands and data may be sent to an attached dataflash IC.
 			 *  The AVR's SPI driver MUST be initialized before any of the dataflash commands are used.
 			 */
 			static inline void Dataflash_Init(void)
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
index 835fee47e..098245d6d 100644
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
@@ -350,7 +350,7 @@
 				return ADC_GetResult();
 			}
 
-			/** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
+			/** Initialises the ADC, ready for conversions. This must be called before any other ADC operations.
 			 *  The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
 			 *  prescaler masks.
 			 *
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
index e2c3d6a10..511105985 100644
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
@@ -71,7 +71,7 @@
 
 	/* Public Interface - May be used in end-application: */
 		/* Inline Functions: */
-			/** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be
+			/** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be
 			 *  before any other TWI operations.
 			 */
 			static inline void TWI_Init(void) ATTR_ALWAYS_INLINE;
diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h
index 5bd7df448..c6db9f962 100644
--- a/LUFA/Drivers/Peripheral/SPI.h
+++ b/LUFA/Drivers/Peripheral/SPI.h
@@ -113,7 +113,7 @@
 			#define SPI_MODE_MASTER                (1 << MSTR)
 
 		/* Inline Functions: */
-			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
+			/** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other
 			 *  SPI routines.
 			 *
 			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the SPI_SPEED_*,
diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h
index 4eb74b9d2..23bbd6a4b 100644
--- a/LUFA/Drivers/Peripheral/Serial.h
+++ b/LUFA/Drivers/Peripheral/Serial.h
@@ -90,7 +90,7 @@
 			void Serial_TxString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1);
 
 		/* Inline Functions: */
-			/** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to
+			/** Initialises the USART, ready for serial data transmission and reception. This initialises the interface to
 			 *  standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
 			 *
 			 *  \param[in] BaudRate     Serial baud rate, in bits per second.
diff --git a/LUFA/Drivers/Peripheral/SerialStream.h b/LUFA/Drivers/Peripheral/SerialStream.h
index 9a40048f6..938d8f016 100644
--- a/LUFA/Drivers/Peripheral/SerialStream.h
+++ b/LUFA/Drivers/Peripheral/SerialStream.h
@@ -82,7 +82,7 @@
 
 	/* Public Interface - May be used in end-application: */
 		/* Inline Functions: */
-			/** Initializes the serial stream (and regular USART driver) so that both the stream and regular
+			/** Initialises the serial stream (and regular USART driver) so that both the stream and regular
 			 *  USART driver functions can be used. Must be called before any stream or regular USART functions.
 			 *
 			 *  \param[in] BaudRate     Baud rate to configure the USART to.
diff --git a/LUFA/Drivers/USB/Class/Common/RNDIS.h b/LUFA/Drivers/USB/Class/Common/RNDIS.h
index a6549c5e3..ab0126e24 100644
--- a/LUFA/Drivers/USB/Class/Common/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Common/RNDIS.h
@@ -96,7 +96,7 @@
 		/** Enum for the possible NDIS adapter states. */
 		enum RNDIS_States_t
 		{
-			RNDIS_Uninitialized    = 0, /**< Adapter currently uninitialized. */
+			RNDIS_Uninitialized    = 0, /**< Adapter currently uninitialised. */
 			RNDIS_Initialized      = 1, /**< Adapter currently initialized but not ready for data transfers. */
 			RNDIS_Data_Initialized = 2, /**< Adapter currently initialized and ready for data transfers. */
 		};
diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h
index 9ea3deae5..e733bfecd 100644
--- a/LUFA/Drivers/USB/Class/Device/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Device/MIDI.h
@@ -129,7 +129,7 @@
 
 
 			/** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the
-			 *  \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events.
+			 *  \ref MIDI_Device_SendEventPacket() function's packing behaviour, to flush queued events.
 			 *
 			 *  \param[in,out] MIDIInterfaceInfo  Pointer to a structure containing a MIDI Class configuration and state.
 			 *
diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h
index 0d126b880..2cfb56e57 100644
--- a/LUFA/Drivers/USB/Class/Host/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Host/MIDI.h
@@ -143,7 +143,7 @@
 			                                  MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
 
 			/** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the
-			 *  \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the
+			 *  \ref MIDI_Host_SendEventPacket() function's packing behaviour, to flush queued events. Events are queued into the
 			 *  pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI
 			 *  events to be packed into a single pipe packet, increasing data throughput.
 			 *
diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h
index 34bbbb183..b1518ffed 100644
--- a/LUFA/Drivers/USB/Class/Host/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h
@@ -158,7 +158,7 @@
 			 */
 			uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
 
-			/** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
+			/** Initialises the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
 			 *  configured via the call to \ref RNDIS_Host_ConfigurePipes().
 			 *
 			 *  \param[in,out] RNDISInterfaceInfo  Pointer to a structure containing an RNDIS Class host configuration and state.
diff --git a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
index 61dda2cbc..001653b52 100644
--- a/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
+++ b/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.h
@@ -218,7 +218,7 @@
 			 *  function. The routine updates the position and remaining configuration descriptor bytes values
 			 *  automatically. If a comparator routine fails a search, the descriptor pointer is retreated back
 			 *  so that the next descriptor search invocation will start from the descriptor which first caused the
-			 *  original search to fail. This behavior allows for one comparator to be used immediately after another
+			 *  original search to fail. This behaviour allows for one comparator to be used immediately after another
 			 *  has failed, starting the second search from the descriptor which failed the first.
 			 *
 			 *  Comparator functions should be standard functions which accept a pointer to the header of the current
diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index 42b0ec7d8..5c295b61f 100644
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -189,7 +189,7 @@
 			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
 			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
 			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
 			 *        \n\n
@@ -207,7 +207,7 @@
 			 *  \note For the smaller series 2 USB AVRs with limited USB controllers, VBUS is not available to the USB controller.
 			 *        this means that the current connection state is derived from the bus suspension and wake up events by default,
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
-			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
+			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
 			 *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
 			 *        \n\n
diff --git a/LUFA/Drivers/USB/LowLevel/USBController.h b/LUFA/Drivers/USB/LowLevel/USBController.h
index f26f77360..f0db7faf4 100644
--- a/LUFA/Drivers/USB/LowLevel/USBController.h
+++ b/LUFA/Drivers/USB/LowLevel/USBController.h
@@ -264,7 +264,7 @@
 			 *                      Valid mode masks are \ref USB_MODE_DEVICE, \ref USB_MODE_HOST or \ref USB_MODE_UID.
 			 *
 			 *  \param[in] Options  Mask indicating the options which should be used when initializing the USB
-			 *                      interface to control the USB interface's behavior. This should be comprised of
+			 *                      interface to control the USB interface's behaviour. This should be comprised of
 			 *                      a USB_OPT_REG_* mask to control the regulator, a USB_OPT_*_PLL mask to control the
 			 *                      PLL, and a USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
 			 *                      mode speed.
diff --git a/LUFA/ManPages/ChangeLog.txt b/LUFA/ManPages/ChangeLog.txt
index 8e7787621..d97dc3718 100644
--- a/LUFA/ManPages/ChangeLog.txt
+++ b/LUFA/ManPages/ChangeLog.txt
@@ -37,11 +37,11 @@
   *  - The software UART in the XPLAINBridge has been largely altered to try to improve upon its performance and reliability
   *  - The USBtoSerial and Benito projects now flushes received data via a flush timer, so that several bytes can be transmitted at once
   *  - Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistencies between the
-  *    behavior of the command line tools used to perform the check on each platform
+  *    behaviour of the command line tools used to perform the check on each platform
   *  - Internal USB driver source files renamed and moved to ease future possible architecture ports
   *  - All internal pseudo-function macros have been converted to true inline functions for type-safety and readability
   *  - Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED
-  *  - Altered the CDC Deivice and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a
+  *  - Altered the CDC Device and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a
   *    negative value (thanks to Andreas Paulin)
   *  - Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer
   *
@@ -220,7 +220,7 @@
   *
   *  <b>Changed:</b>
   *  - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of key codes
-  *    as this relied on non-standard OS driver behavior to repeat key groups
+  *    as this relied on non-standard OS driver behaviour to repeat key groups
   *  - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class
   *    driver common defines, rather than being defined in the Host mode Class driver section only
   *  - The USB_MODE_HOST token is now defined even when host mode is not available
@@ -254,7 +254,7 @@
   *    devices from timing out the data pipes
   *  - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts
   *  - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing
-  *  - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled
+  *  - Fixed use of deprecated struct initialisers, removed library unused parameter warnings when compiled with -Wextra enabled
   *  - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert)
   *  - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be
   *    used (thanks to Daniel Levy)
@@ -338,7 +338,7 @@
   *  - Added new "Common" section to the class drivers, to hold all mode-independent definitions for clarity
   *  - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code
   *  - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls
-  *  - Changed the parameters and behavior of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks
+  *  - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks
   *    and data validations internally, to simplify user code
   *  - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles
   *  - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect
@@ -540,7 +540,7 @@
   *    USB_INITERROR_NoUSBModeSpecified
   *  - Renamed USB_PowerOnFail event to USB_InitFailure
   *  - Renamed OTG.h header functions to be more consistent with the rest of the library API
-  *  - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander)
+  *  - Changed over all deprecated GCC structure tag initialisers to the standardized C99 format (thanks to Mike Alexander)
   *  - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode
   *    rather than having the library pass only partially read header data to the application
   *  - The USB_UnhandledControlPacket event has had its parameters removed, in favor of accessing the new USB_ControlRequest structure
diff --git a/LUFA/ManPages/CompileTimeTokens.txt b/LUFA/ManPages/CompileTimeTokens.txt
index 6f2e804ad..fbfbc3d98 100644
--- a/LUFA/ManPages/CompileTimeTokens.txt
+++ b/LUFA/ManPages/CompileTimeTokens.txt
@@ -7,7 +7,7 @@
 /** \page Page_TokenSummary Summary of Compile Tokens
  *
  *  The following lists all the possible tokens which can be defined in a project makefile, and passed to the
- *  compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behavior,
+ *  compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour,
  *  or remove features unused by a given application in order to save flash space.
  *
  *
@@ -87,7 +87,7 @@
  *  due to the extra code required to deal with byte alignment.
  *
  *  <b>USE_STATIC_OPTIONS</b>=<i>x</i> - ( \ref Group_USBManagement ) \n
- *  By default, the USB_Init() function accepts dynamic options at runtime to alter the library behavior, including whether the USB pad
+ *  By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
  *  voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options
  *  mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing
  *  the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an
diff --git a/LUFA/ManPages/MigrationInformation.txt b/LUFA/ManPages/MigrationInformation.txt
index 2a0d0c533..bc3cfe5d4 100644
--- a/LUFA/ManPages/MigrationInformation.txt
+++ b/LUFA/ManPages/MigrationInformation.txt
@@ -81,7 +81,7 @@
  *  <b>Host Mode</b>
  *    - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
  *      packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
- *      pipe bank is full. To override this new behavior and revert to the previous behavior, the user application may manually
+ *      pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
  *      flush the queued event(s) to the device by calling \ref MIDI_Host_Flush().
  *    - The Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address
  *      is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint
@@ -90,7 +90,7 @@
  *  <b>Device Mode</b>
  *    - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
  *      packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
- *      endpoint bank is full. To override this new behavior and revert to the previous behavior, the user application may manually
+ *      endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
  *      flush the queued event(s) to the host by calling \ref MIDI_Device_Flush().
  *
  * \section Sec_Migration091223 Migrating from 091122 to 091223
@@ -122,11 +122,11 @@
  *    - The ADC_Off() function has been renamed to \ref ADC_ShutDown() to be consistent with the rest of the library.
  *    - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See
  *      the \ref SPI_Init() function documentation for more details
- *    - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a
+ *    - The \ref Dataflash_Init() routine no longer initialises the SPI bus - the SPI bus should be initialized manually via a
  *      call to SPI_Init() before using the Dataflash driver
  *
  *  <b>Host Mode</b>
- *    - The USB_GetDeviceConfigDescriptor() function's parameters and behavior has changed; the user is required to
+ *    - The USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to
  *      preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single
  *      call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user
  *      application perform these intermediary steps.
@@ -435,7 +435,7 @@
  *
  *  <b>Library Demos</b>
  *    - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations
- *      of the RNDIS specification, which had non-standard behavior. Projects built upon the demo should upgrade
+ *      of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade
  *      to the latest code.
  *    - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where
  *      possible any existing devices upgrade to the latest bootloader code.
diff --git a/LUFA/Scheduler/Scheduler.h b/LUFA/Scheduler/Scheduler.h
index d9fe3b8fd..673a933f8 100644
--- a/LUFA/Scheduler/Scheduler.h
+++ b/LUFA/Scheduler/Scheduler.h
@@ -145,7 +145,7 @@
 				 */
 				void Scheduler_Start(void);
 				
-				/** Initializes the scheduler so that the scheduler functions can be called before the scheduler itself
+				/** Initialises the scheduler so that the scheduler functions can be called before the scheduler itself
 				 *  is started. This must be executed before any scheduler function calls other than Scheduler_Start(),
 				 *  and can be omitted if no such functions could be called before the scheduler is started.
 				 */