Spell check library source code files.

4 files changed, 9 insertions, 9 deletions

diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
index 99f70d14b..7a02c613a 100644
--- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h
@@ -53,7 +53,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the ADC driver before first use
+ *      // Initialize the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
  *
  *      // Must setup the ADC channel to read beforehand
@@ -411,7 +411,7 @@
 				return ADC_GetResult();
 			}
 
-			/** Initialises the ADC, ready for conversions. This must be called before any other ADC operations.
+			/** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
 			 *  The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
 			 *  prescaler masks.
 			 *
diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
index d800fca1a..634c54480 100644
--- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h
@@ -53,7 +53,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the SPI driver before first use
+ *      // Initialize the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
  *               SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
  *
@@ -159,7 +159,7 @@
 			//@}
 			
 		/* Inline Functions: */
-			/** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other
+			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
 			 *  SPI routines.
 			 *
 			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
index bb9ba856e..7f519d3ba 100644
--- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h
@@ -51,7 +51,7 @@
  *  application.
  *
  *  \code
- *      // Initialise the serial USART driver before first use, with 9600 baud (and no double-speed mode)
+ *      // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
  *      Serial_Init(9600, false);
  *
  *      // Send a string through the USART
diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
index feac8a858..d0c78bc8d 100644
--- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
+++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h
@@ -52,7 +52,7 @@
  *
  *  <b>Low Level API Example:</b>
  *  \code
- *      // Initialise the TWI driver before first use
+ *      // Initialize the TWI driver before first use
  *      TWI_Init(TWI_BIT_PRESCALE_1, 10);
  *
  *      // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
@@ -91,7 +91,7 @@
  * 
  *  <b>High Level API Example:</b>
  *  \code
- *      // Initialise the TWI driver before first use
+ *      // Initialize the TWI driver before first use
  *      TWI_Init(TWI_BIT_PRESCALE_1, 10);
  *
  *      // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
@@ -171,7 +171,7 @@
 			/** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */
 			enum TWI_ErrorCodes_t
 			{
-				TWI_ERROR_NoError              = 0, /**< Indicates that the command completed sucessfully. */
+				TWI_ERROR_NoError              = 0, /**< Indicates that the command completed successfully. */
 				TWI_ERROR_BusFault             = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */
 				TWI_ERROR_BusCaptureTimeout    = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */
 				TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */
@@ -180,7 +180,7 @@
 			};
 	
 		/* Inline Functions: */
-			/** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be
+			/** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be
 			 *  before any other TWI operations.
 			 *
 			 *  The generated SCL frequency will be according to the formula <pre>F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)</pre>.