From f01a05415c03b0dd61297849ece2cfcce7f8d3e8 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Wed, 1 Jun 2011 14:33:40 +0000 Subject: Spell check library source code files. --- LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h | 4 ++-- LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h | 4 ++-- LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h | 2 +- LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h | 8 ++++---- 4 files changed, 9 insertions(+), 9 deletions(-) (limited to 'LUFA/Drivers/Peripheral') diff --git a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h index 99f70d14b..7a02c613a 100644 --- a/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h @@ -53,7 +53,7 @@ * application. * * \code - * // Initialise the ADC driver before first use + * // Initialize the ADC driver before first use * ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32); * * // Must setup the ADC channel to read beforehand @@ -411,7 +411,7 @@ return ADC_GetResult(); } - /** Initialises the ADC, ready for conversions. This must be called before any other ADC operations. + /** Initializes the ADC, ready for conversions. This must be called before any other ADC operations. * The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and * prescaler masks. * diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h index d800fca1a..634c54480 100644 --- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h @@ -53,7 +53,7 @@ * application. * * \code - * // Initialise the SPI driver before first use + * // Initialize the SPI driver before first use * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING | * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER); * @@ -159,7 +159,7 @@ //@} /* Inline Functions: */ - /** Initialises the SPI subsystem, ready for transfers. Must be called before calling any other + /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other * SPI routines. * * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*, diff --git a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h index bb9ba856e..7f519d3ba 100644 --- a/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h @@ -51,7 +51,7 @@ * application. * * \code - * // Initialise the serial USART driver before first use, with 9600 baud (and no double-speed mode) + * // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode) * Serial_Init(9600, false); * * // Send a string through the USART diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h index feac8a858..d0c78bc8d 100644 --- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h @@ -52,7 +52,7 @@ * * Low Level API Example: * \code - * // Initialise the TWI driver before first use + * // Initialize the TWI driver before first use * TWI_Init(TWI_BIT_PRESCALE_1, 10); * * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout @@ -91,7 +91,7 @@ * * High Level API Example: * \code - * // Initialise the TWI driver before first use + * // Initialize the TWI driver before first use * TWI_Init(TWI_BIT_PRESCALE_1, 10); * * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout @@ -171,7 +171,7 @@ /** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */ enum TWI_ErrorCodes_t { - TWI_ERROR_NoError = 0, /**< Indicates that the command completed sucessfully. */ + TWI_ERROR_NoError = 0, /**< Indicates that the command completed successfully. */ TWI_ERROR_BusFault = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */ TWI_ERROR_BusCaptureTimeout = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */ TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */ @@ -180,7 +180,7 @@ }; /* Inline Functions: */ - /** Initialises the TWI hardware into master mode, ready for data transmission and reception. This must be + /** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be * before any other TWI operations. * * The generated SCL frequency will be according to the formula 
F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)
. -- cgit v1.2.3