Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 162 insertions, 162 deletions

diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h
index 662d7f270..5abc6e00f 100644
--- a/LUFA/Drivers/Peripheral/Serial.h
+++ b/LUFA/Drivers/Peripheral/Serial.h
@@ -1,162 +1,162 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *  \brief Master include file for the USART peripheral driver.

- *

- *  Driver for the USART subsystem on supported USB AVRs.

- */

- 

-/** \ingroup Group_PeripheralDrivers

- *  @defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h

- *

- *  \section Sec_Dependencies Module Source Dependencies

- *  The following files must be built with any user project that uses this module:

- *    - LUFA/Drivers/Peripheral/Serial.c

- *

- *  \section Module Description

- *  Hardware serial USART driver. This module provides an easy to use driver for

- *  the setup of and transfer of data over the AVR's USART port.

- *

- *  @{

- */

- 

-#ifndef __SERIAL_H__

-#define __SERIAL_H__

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <avr/pgmspace.h>

-		#include <stdbool.h>

-		

-		#include "../../Common/Common.h"

-		#include "../Misc/TerminalCodes.h"

-

-	/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is

-			 *  not set.

-			 */

-			#define SERIAL_UBBRVAL(baud)    ((((F_CPU / 16) + (baud / 2)) / (baud)) - 1)

-

-			/** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is

-			 *  set.

-			 */

-			#define SERIAL_2X_UBBRVAL(baud) ((((F_CPU / 8) + (baud / 2)) / (baud)) - 1)

-

-		/* Pseudo-Function Macros: */

-			#if defined(__DOXYGEN__)

-				/** Indicates whether a character has been received through the USART.

-				 *

-				 *  \return Boolean true if a character has been received, false otherwise

-				 */

-				static inline bool Serial_IsCharReceived(void);

-			#else

-				#define Serial_IsCharReceived() ((UCSR1A & (1 << RXC1)) ? true : false)

-			#endif

-

-		/* Function Prototypes: */

-			/** Transmits a given string located in program space (FLASH) through the USART.

-			 *

-			 *  \param[in] FlashStringPtr  Pointer to a string located in program space

-			 */

-			void Serial_TxString_P(const char *FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1);

-

-			/** Transmits a given string located in SRAM memory through the USART.

-			 *

-			 *  \param[in] StringPtr  Pointer to a string located in SRAM space

-			 */

-			void Serial_TxString(const char *StringPtr) ATTR_NON_NULL_PTR_ARG(1);

-

-		/* Inline Functions: */

-			/** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to

-			 *  standard 8-bit, no parity, 1 stop bit settings suitable for most applications.

-			 *

-			 *  \param[in] BaudRate     Serial baud rate, in bits per second

-			 *  \param[in] DoubleSpeed  Enables double speed mode when set, halving the sample time to double the baud rate

-			 */

-			static inline void Serial_Init(const uint32_t BaudRate, const bool DoubleSpeed)

-			{

-				UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0);

-				UCSR1B = ((1 << TXEN1)  | (1 << RXEN1));

-				UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10));

-				

-				DDRD  |= (1 << 3);	

-				PORTD |= (1 << 2);

-				

-				UBRR1  = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));

-			}

-

-			/** Turns off the USART driver, disabling and returning used hardware to their default configuration. */

-			static inline void Serial_ShutDown(void)

-			{

-				UCSR1A = 0;

-				UCSR1B = 0;

-				UCSR1C = 0;

-				

-				DDRD  &= ~(1 << 3);	

-				PORTD &= ~(1 << 2);

-				

-				UBRR1  = 0;

-			}

-			

-			/** Transmits a given byte through the USART.

-			 *

-			 *  \param[in] DataByte  Byte to transmit through the USART

-			 */

-			static inline void Serial_TxByte(const char DataByte)

-			{

-				while (!(UCSR1A & (1 << UDRE1)));

-				UDR1 = DataByte;

-			}

-

-			/** Receives a byte from the USART.

-			 *

-			 *  \return Byte received from the USART

-			 */

-			static inline char Serial_RxByte(void)

-			{

-				while (!(UCSR1A & (1 << RXC1)));

-				return UDR1; 

-			}

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-		

-#endif

-

-/** @} */

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Master include file for the USART peripheral driver.
+ *
+ *  Driver for the USART subsystem on supported USB AVRs.
+ */
+ 
+/** \ingroup Group_PeripheralDrivers
+ *  @defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h
+ *
+ *  \section Sec_Dependencies Module Source Dependencies
+ *  The following files must be built with any user project that uses this module:
+ *    - LUFA/Drivers/Peripheral/Serial.c
+ *
+ *  \section Module Description
+ *  Hardware serial USART driver. This module provides an easy to use driver for
+ *  the setup of and transfer of data over the AVR's USART port.
+ *
+ *  @{
+ */
+ 
+#ifndef __SERIAL_H__
+#define __SERIAL_H__
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+		#include <stdbool.h>
+		
+		#include "../../Common/Common.h"
+		#include "../Misc/TerminalCodes.h"
+
+	/* Enable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			extern "C" {
+		#endif
+
+	/* Public Interface - May be used in end-application: */
+		/* Macros: */
+			/** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is
+			 *  not set.
+			 */
+			#define SERIAL_UBBRVAL(baud)    ((((F_CPU / 16) + (baud / 2)) / (baud)) - 1)
+
+			/** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is
+			 *  set.
+			 */
+			#define SERIAL_2X_UBBRVAL(baud) ((((F_CPU / 8) + (baud / 2)) / (baud)) - 1)
+
+		/* Pseudo-Function Macros: */
+			#if defined(__DOXYGEN__)
+				/** Indicates whether a character has been received through the USART.
+				 *
+				 *  \return Boolean true if a character has been received, false otherwise
+				 */
+				static inline bool Serial_IsCharReceived(void);
+			#else
+				#define Serial_IsCharReceived() ((UCSR1A & (1 << RXC1)) ? true : false)
+			#endif
+
+		/* Function Prototypes: */
+			/** Transmits a given string located in program space (FLASH) through the USART.
+			 *
+			 *  \param[in] FlashStringPtr  Pointer to a string located in program space
+			 */
+			void Serial_TxString_P(const char *FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1);
+
+			/** Transmits a given string located in SRAM memory through the USART.
+			 *
+			 *  \param[in] StringPtr  Pointer to a string located in SRAM space
+			 */
+			void Serial_TxString(const char *StringPtr) ATTR_NON_NULL_PTR_ARG(1);
+
+		/* Inline Functions: */
+			/** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to
+			 *  standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
+			 *
+			 *  \param[in] BaudRate     Serial baud rate, in bits per second
+			 *  \param[in] DoubleSpeed  Enables double speed mode when set, halving the sample time to double the baud rate
+			 */
+			static inline void Serial_Init(const uint32_t BaudRate, const bool DoubleSpeed)
+			{
+				UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0);
+				UCSR1B = ((1 << TXEN1)  | (1 << RXEN1));
+				UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10));
+				
+				DDRD  |= (1 << 3);	
+				PORTD |= (1 << 2);
+				
+				UBRR1  = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
+			}
+
+			/** Turns off the USART driver, disabling and returning used hardware to their default configuration. */
+			static inline void Serial_ShutDown(void)
+			{
+				UCSR1A = 0;
+				UCSR1B = 0;
+				UCSR1C = 0;
+				
+				DDRD  &= ~(1 << 3);	
+				PORTD &= ~(1 << 2);
+				
+				UBRR1  = 0;
+			}
+			
+			/** Transmits a given byte through the USART.
+			 *
+			 *  \param[in] DataByte  Byte to transmit through the USART
+			 */
+			static inline void Serial_TxByte(const char DataByte)
+			{
+				while (!(UCSR1A & (1 << UDRE1)));
+				UDR1 = DataByte;
+			}
+
+			/** Receives a byte from the USART.
+			 *
+			 *  \return Byte received from the USART
+			 */
+			static inline char Serial_RxByte(void)
+			{
+				while (!(UCSR1A & (1 << RXC1)));
+				return UDR1; 
+			}
+
+	/* Disable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			}
+		#endif
+		
+#endif
+
+/** @} */