From 071e02c6b6b4837fa9cf0b6d4c749994e02638d7 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Sat, 8 May 2010 03:12:14 +0000 Subject: Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style. --- LUFA/Drivers/Peripheral/Serial.h | 324 +++++++++++++++++++-------------------- 1 file changed, 162 insertions(+), 162 deletions(-) (limited to 'LUFA/Drivers/Peripheral/Serial.h') diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h index 662d7f270..5abc6e00f 100644 --- a/LUFA/Drivers/Peripheral/Serial.h +++ b/LUFA/Drivers/Peripheral/Serial.h @@ -1,162 +1,162 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2010. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com -*/ - -/* - Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Master include file for the USART peripheral driver. - * - * Driver for the USART subsystem on supported USB AVRs. - */ - -/** \ingroup Group_PeripheralDrivers - * @defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h - * - * \section Sec_Dependencies Module Source Dependencies - * The following files must be built with any user project that uses this module: - * - LUFA/Drivers/Peripheral/Serial.c - * - * \section Module Description - * Hardware serial USART driver. This module provides an easy to use driver for - * the setup of and transfer of data over the AVR's USART port. - * - * @{ - */ - -#ifndef __SERIAL_H__ -#define __SERIAL_H__ - - /* Includes: */ - #include - #include - #include - - #include "../../Common/Common.h" - #include "../Misc/TerminalCodes.h" - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is - * not set. - */ - #define SERIAL_UBBRVAL(baud) ((((F_CPU / 16) + (baud / 2)) / (baud)) - 1) - - /** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is - * set. - */ - #define SERIAL_2X_UBBRVAL(baud) ((((F_CPU / 8) + (baud / 2)) / (baud)) - 1) - - /* Pseudo-Function Macros: */ - #if defined(__DOXYGEN__) - /** Indicates whether a character has been received through the USART. - * - * \return Boolean true if a character has been received, false otherwise - */ - static inline bool Serial_IsCharReceived(void); - #else - #define Serial_IsCharReceived() ((UCSR1A & (1 << RXC1)) ? true : false) - #endif - - /* Function Prototypes: */ - /** Transmits a given string located in program space (FLASH) through the USART. - * - * \param[in] FlashStringPtr Pointer to a string located in program space - */ - void Serial_TxString_P(const char *FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1); - - /** Transmits a given string located in SRAM memory through the USART. - * - * \param[in] StringPtr Pointer to a string located in SRAM space - */ - void Serial_TxString(const char *StringPtr) ATTR_NON_NULL_PTR_ARG(1); - - /* Inline Functions: */ - /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to - * standard 8-bit, no parity, 1 stop bit settings suitable for most applications. - * - * \param[in] BaudRate Serial baud rate, in bits per second - * \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate - */ - static inline void Serial_Init(const uint32_t BaudRate, const bool DoubleSpeed) - { - UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0); - UCSR1B = ((1 << TXEN1) | (1 << RXEN1)); - UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10)); - - DDRD |= (1 << 3); - PORTD |= (1 << 2); - - UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate)); - } - - /** Turns off the USART driver, disabling and returning used hardware to their default configuration. */ - static inline void Serial_ShutDown(void) - { - UCSR1A = 0; - UCSR1B = 0; - UCSR1C = 0; - - DDRD &= ~(1 << 3); - PORTD &= ~(1 << 2); - - UBRR1 = 0; - } - - /** Transmits a given byte through the USART. - * - * \param[in] DataByte Byte to transmit through the USART - */ - static inline void Serial_TxByte(const char DataByte) - { - while (!(UCSR1A & (1 << UDRE1))); - UDR1 = DataByte; - } - - /** Receives a byte from the USART. - * - * \return Byte received from the USART - */ - static inline char Serial_RxByte(void) - { - while (!(UCSR1A & (1 << RXC1))); - return UDR1; - } - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ +/* + LUFA Library + Copyright (C) Dean Camera, 2010. + + dean [at] fourwalledcubicle [dot] com + www.fourwalledcubicle.com +*/ + +/* + Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Master include file for the USART peripheral driver. + * + * Driver for the USART subsystem on supported USB AVRs. + */ + +/** \ingroup Group_PeripheralDrivers + * @defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h + * + * \section Sec_Dependencies Module Source Dependencies + * The following files must be built with any user project that uses this module: + * - LUFA/Drivers/Peripheral/Serial.c + * + * \section Module Description + * Hardware serial USART driver. This module provides an easy to use driver for + * the setup of and transfer of data over the AVR's USART port. + * + * @{ + */ + +#ifndef __SERIAL_H__ +#define __SERIAL_H__ + + /* Includes: */ + #include + #include + #include + + #include "../../Common/Common.h" + #include "../Misc/TerminalCodes.h" + + /* Enable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + extern "C" { + #endif + + /* Public Interface - May be used in end-application: */ + /* Macros: */ + /** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is + * not set. + */ + #define SERIAL_UBBRVAL(baud) ((((F_CPU / 16) + (baud / 2)) / (baud)) - 1) + + /** Macro for calculating the baud value from a given baud rate when the U2X (double speed) bit is + * set. + */ + #define SERIAL_2X_UBBRVAL(baud) ((((F_CPU / 8) + (baud / 2)) / (baud)) - 1) + + /* Pseudo-Function Macros: */ + #if defined(__DOXYGEN__) + /** Indicates whether a character has been received through the USART. + * + * \return Boolean true if a character has been received, false otherwise + */ + static inline bool Serial_IsCharReceived(void); + #else + #define Serial_IsCharReceived() ((UCSR1A & (1 << RXC1)) ? true : false) + #endif + + /* Function Prototypes: */ + /** Transmits a given string located in program space (FLASH) through the USART. + * + * \param[in] FlashStringPtr Pointer to a string located in program space + */ + void Serial_TxString_P(const char *FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1); + + /** Transmits a given string located in SRAM memory through the USART. + * + * \param[in] StringPtr Pointer to a string located in SRAM space + */ + void Serial_TxString(const char *StringPtr) ATTR_NON_NULL_PTR_ARG(1); + + /* Inline Functions: */ + /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to + * standard 8-bit, no parity, 1 stop bit settings suitable for most applications. + * + * \param[in] BaudRate Serial baud rate, in bits per second + * \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate + */ + static inline void Serial_Init(const uint32_t BaudRate, const bool DoubleSpeed) + { + UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0); + UCSR1B = ((1 << TXEN1) | (1 << RXEN1)); + UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10)); + + DDRD |= (1 << 3); + PORTD |= (1 << 2); + + UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate)); + } + + /** Turns off the USART driver, disabling and returning used hardware to their default configuration. */ + static inline void Serial_ShutDown(void) + { + UCSR1A = 0; + UCSR1B = 0; + UCSR1C = 0; + + DDRD &= ~(1 << 3); + PORTD &= ~(1 << 2); + + UBRR1 = 0; + } + + /** Transmits a given byte through the USART. + * + * \param[in] DataByte Byte to transmit through the USART + */ + static inline void Serial_TxByte(const char DataByte) + { + while (!(UCSR1A & (1 << UDRE1))); + UDR1 = DataByte; + } + + /** Receives a byte from the USART. + * + * \return Byte received from the USART + */ + static inline char Serial_RxByte(void) + { + while (!(UCSR1A & (1 << RXC1))); + return UDR1; + } + + /* Disable C linkage for C++ Compilers: */ + #if defined(__cplusplus) + } + #endif + +#endif + +/** @} */ -- cgit v1.2.3