Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.

1 files changed, 0 insertions, 93 deletions

diff --git a/Demos/Device/AudioOutput/AudioOutput.txt b/Demos/Device/AudioOutput/AudioOutput.txt
deleted file mode 100644
index a47f9b5f3..000000000
--- a/Demos/Device/AudioOutput/AudioOutput.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \mainpage Audio Output Device Demo

- *

- *  \section SSec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- *  <table>

- *   <tr>

- *    <td><b>USB Mode:</b></td>

- *    <td>Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>USB Class:</b></td>

- *    <td>Audio Class</td>

- *   </tr>

- *   <tr> 

- *    <td><b>USB Subclass:</b></td>

- *    <td>Standard Audio Device</td>

- *   </tr>

- *   <tr>

- *    <td><b>Relevant Standards:</b></td>

- *    <td>USBIF Audio Class Specification</td>

- *    <td>USBIF Audio Class Terminal Types Specification</td>

- *    <td>USBIF Audio Data Formats Specification</td>

- *   </tr>

- *   <tr>

- *    <td><b>Usable Speeds:</b></td>

- *    <td>Full Speed Mode</td>

- *   </tr>

- *  </table>

- *

- *  \section SSec_Description Project Description: 

- *

- *  Audio demonstration application. This gives a simple reference

- *  application for implementing a USB Audio Output device using the

- *  basic USB Audio drivers in all modern OSes (i.e. no special drivers

- *  required).

- *  

- *  On start-up the system will automatically enumerate and function

- *  as a USB speaker. Incoming audio will output in 8-bit PWM onto

- *  the timer output (timer 3 for the AT90USBXXX6/7 USB AVRs, timer 1 for

- *  the AT90USBXXX2 controller AVRs) compare channel A for AUDIO_OUT_MONO

- *  mode, on channels A and B for AUDIO_OUT_STEREO and on the board LEDs

- *  for AUDIO_OUT_LEDS mode. Decouple audio outputs with a capacitor and

- *  attach to a speaker to hear the audio.

- *  

- *  Under Windows, if a driver request dialogue pops up, select the option

- *  to automatically install the appropriate drivers.

- *

- *  \section SSec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td><b>Define Name:</b></td>

- *    <td><b>Location:</b></td>

- *    <td><b>Description:</b></td>

- *   </tr>

- *   <tr>

- *    <td>AUDIO_OUT_STEREO</td>

- *    <td>Makefile CDEFS</td>

- *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>

- *   </tr>

- *   <tr>

- *    <td>AUDIO_OUT_MONO</td>

- *    <td>Makefile CDEFS</td>

- *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>

- *   </tr>

- *   <tr>

- *    <td>AUDIO_OUT_LEDS</td>

- *    <td>Makefile CDEFS</td>

- *    <td>When defined, this outputs the audio samples in stereo to the board LEDs.</td>

- *   </tr>

- *   <tr>

- *    <td>AUDIO_OUT_PORTC</td>

- *    <td>Makefile CDEFS</td>

- *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an

- *        external DAC.</td>

- *   </tr>

- *   <tr>

- *    <td>AUDIO_SAMPLE_FREQUENCY</td>

- *    <td>Descriptors.h</td>

- *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>

- *   </tr>

- *  </table>

- */