From b9b03aadb219d06fbad9d110e508db93e45461af Mon Sep 17 00:00:00 2001
From: Dean Camera <dean@fourwalledcubicle.com>
Date: Fri, 5 Jun 2009 07:16:33 +0000
Subject: Move new Class Driver powered demos to a new ClassDriver
 subdirectory, re-add old low level demos to a LowLevel subdirectory.

---
 Demos/Device/AudioOutput/AudioOutput.txt | 93 --------------------------------
 1 file changed, 93 deletions(-)
 delete mode 100644 Demos/Device/AudioOutput/AudioOutput.txt

(limited to 'Demos/Device/AudioOutput/AudioOutput.txt')

diff --git a/Demos/Device/AudioOutput/AudioOutput.txt b/Demos/Device/AudioOutput/AudioOutput.txt
deleted file mode 100644
index a47f9b5f3..000000000
--- a/Demos/Device/AudioOutput/AudioOutput.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-/** \file
- *
- *  This file contains special DoxyGen information for the generation of the main page and other special
- *  documentation pages. It is not a project source file.
- */
- 
-/** \mainpage Audio Output Device Demo
- *
- *  \section SSec_Info USB Information:
- *
- *  The following table gives a rundown of the USB utilization of this demo.
- *
- *  <table>
- *   <tr>
- *    <td><b>USB Mode:</b></td>
- *    <td>Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>USB Class:</b></td>
- *    <td>Audio Class</td>
- *   </tr>
- *   <tr> 
- *    <td><b>USB Subclass:</b></td>
- *    <td>Standard Audio Device</td>
- *   </tr>
- *   <tr>
- *    <td><b>Relevant Standards:</b></td>
- *    <td>USBIF Audio Class Specification</td>
- *    <td>USBIF Audio Class Terminal Types Specification</td>
- *    <td>USBIF Audio Data Formats Specification</td>
- *   </tr>
- *   <tr>
- *    <td><b>Usable Speeds:</b></td>
- *    <td>Full Speed Mode</td>
- *   </tr>
- *  </table>
- *
- *  \section SSec_Description Project Description: 
- *
- *  Audio demonstration application. This gives a simple reference
- *  application for implementing a USB Audio Output device using the
- *  basic USB Audio drivers in all modern OSes (i.e. no special drivers
- *  required).
- *  
- *  On start-up the system will automatically enumerate and function
- *  as a USB speaker. Incoming audio will output in 8-bit PWM onto
- *  the timer output (timer 3 for the AT90USBXXX6/7 USB AVRs, timer 1 for
- *  the AT90USBXXX2 controller AVRs) compare channel A for AUDIO_OUT_MONO
- *  mode, on channels A and B for AUDIO_OUT_STEREO and on the board LEDs
- *  for AUDIO_OUT_LEDS mode. Decouple audio outputs with a capacitor and
- *  attach to a speaker to hear the audio.
- *  
- *  Under Windows, if a driver request dialogue pops up, select the option
- *  to automatically install the appropriate drivers.
- *
- *  \section SSec_Options Project Options
- *
- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- *  <table>
- *   <tr>
- *    <td><b>Define Name:</b></td>
- *    <td><b>Location:</b></td>
- *    <td><b>Description:</b></td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_STEREO</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, this outputs the audio samples in stereo to the timer output pins of the microcontroller.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_MONO</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, this outputs the audio samples in mono to the timer output pin of the microcontroller.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_LEDS</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, this outputs the audio samples in stereo to the board LEDs.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_OUT_PORTC</td>
- *    <td>Makefile CDEFS</td>
- *    <td>When defined, this outputs the audio samples in mono to port C of the microcontroller, for connection to an
- *        external DAC.</td>
- *   </tr>
- *   <tr>
- *    <td>AUDIO_SAMPLE_FREQUENCY</td>
- *    <td>Descriptors.h</td>
- *    <td>Gives the audio sample rate per channel for the audio stream, in Hz.</td>
- *   </tr>
- *  </table>
- */
-- 
cgit v1.2.3