Strip out BuildTest sub-makefile contents as much as possible. Remove old UC3 build test makefile from the ModuleTest build test. Add platform module to the example LUFA makefile.

9 files changed, 30 insertions, 544 deletions

diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile
index 54afa5755..6ed32a47e 100644
--- a/BuildTests/BoardDriverTest/makefile
+++ b/BuildTests/BoardDriverTest/makefile
@@ -54,9 +54,9 @@ testboards:
 clean:

 	rm -f BuildMakefile

 	rm -f BoardList.txt

-	$(MAKE) -s -f makefile.test clean ARCH=AVR8

-	$(MAKE) -s -f makefile.test clean ARCH=XMEGA

-	$(MAKE) -s -f makefile.test clean ARCH=UC3

+	$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287

+	$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u

+	$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256

 

 %:

 

diff --git a/BuildTests/BoardDriverTest/makefile.test b/BuildTests/BoardDriverTest/makefile.test
index 60e97397d..11d0372ef 100644
--- a/BuildTests/BoardDriverTest/makefile.test
+++ b/BuildTests/BoardDriverTest/makefile.test
@@ -9,11 +9,11 @@
 #         LUFA Project Makefile.

 # --------------------------------------

 

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = NONE

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

+MCU          = 

+ARCH         = 

+BOARD        = 

+F_CPU        = $(F_USB)

+F_USB        = 8000000

 OPTIMIZATION = 1

 TARGET       = Test

 SRC          = $(TARGET).c

diff --git a/BuildTests/ModuleTest/makefile b/BuildTests/ModuleTest/makefile
index a756c309c..93a49e8d9 100644
--- a/BuildTests/ModuleTest/makefile
+++ b/BuildTests/ModuleTest/makefile
@@ -48,9 +48,9 @@ end:
 	$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%)

 

 clean:

-	$(MAKE) -s -f makefile.test clean ARCH=AVR8

-	$(MAKE) -s -f makefile.test clean ARCH=XMEGA

-	$(MAKE) -s -f makefile.test clean ARCH=UC3

+	$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES))

+	$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES))

+	$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES))

 

 %:

 

diff --git a/BuildTests/ModuleTest/makefile.test b/BuildTests/ModuleTest/makefile.test
index b3307f897..f92ef9c33 100644
--- a/BuildTests/ModuleTest/makefile.test
+++ b/BuildTests/ModuleTest/makefile.test
@@ -9,10 +9,14 @@
 #         LUFA Project Makefile.

 # --------------------------------------

 

-MCU          = at90usb1287

-ARCH         = AVR8

+MCU          = 

+ARCH         = 

 BOARD        = NONE

-F_CPU        = 8000000

+F_CPU        = $(F_USB)

+OPTIMIZATION = 1

+TARGET       = Test

+SRC          = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB)

+LUFA_PATH    = ../../LUFA/

 

 ifeq ($(ARCH), AVR8)

 F_USB        = 8000000

@@ -22,11 +26,6 @@ else ifeq ($(ARCH), UC3)
 F_USB        = 48000000

 endif

 

-OPTIMIZATION = 1

-TARGET       = Test

-SRC          = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB)

-LUFA_PATH    = ../../LUFA/

-

 # Generic C/C++ compiler flags

 CC_FLAGS  = -Wextra

 CC_FLAGS += -Werror

diff --git a/BuildTests/ModuleTest/makefile.uc3 b/BuildTests/ModuleTest/makefile.uc3
deleted file mode 100644
index 5628748ee..000000000
--- a/BuildTests/ModuleTest/makefile.uc3
+++ /dev/null
@@ -1,513 +0,0 @@
-# Hey Emacs, this is a -*- makefile -*-

-#----------------------------------------------------------------------------

-# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.

-#  >> Modified for use with the LUFA project. <<

-#

-# Released to the Public Domain

-#

-# Additional material for this makefile was written by:

-# Peter Fleury

-# Tim Henigan

-# Colin O'Flynn

-# Reiner Patommel

-# Markus Pfaff

-# Sander Pool

-# Frederik Rouleau

-# Carlos Lamas

-# Dean Camera

-# Opendous Inc.

-# Denver Gingerich

-#

-#----------------------------------------------------------------------------

-# On command line:

-#

-# make all = Make software.

-#

-# make clean = Clean out built project files.

-#

-# make dfu = Download the hex file to the device, using dfu-programmer (must

-#            have dfu-programmer installed).

-#

-# make flip = Download the hex file to the device, using Atmel FLIP (must

-#             have Atmel FLIP installed).

-#

-# make doxygen = Generate DoxyGen documentation for the project (must have

-#                DoxyGen installed)

-#

-# make filename.s = Just compile filename.c into the assembler code only.

-#

-# make filename.i = Create a preprocessed source file for use in submitting

-#                   bug reports to the GCC project.

-#

-# To rebuild project do "make clean" then "make all".

-#----------------------------------------------------------------------------

-

-

-# MCU name

-MCU = uc3a3256

-

-

-# Targeted chip architecture (see library "Architectures" documentation)

-ARCH = UC3

-

-

-# Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

-# "Board" inside the application directory.

-BOARD = NONE

-

-

-# Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the

-#     processor frequency in Hz. You can then use this symbol in your source code to

-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

-#     automatically to create a 32-bit value in your source code.

-#

-#     This should be the frequency the system core runs at, after the system clock

-#     has been set up correctly and started.

-F_CPU = 12000000

-

-

-# USB controller master clock frequency.

-#     This will define a symbol, F_USB, in all source code files equal to the

-#     input clock frequency of the USB controller's clock generator in Hz.

-#

-#     For the UC3 chips, this should be equal to 48MHz or 96MHz.

-F_USB = 48000000

-

-

-# Output format. (can be srec, ihex, binary)

-FORMAT = ihex

-

-

-# Target file name (without extension).

-TARGET = Test

-

-

-# Object files directory

-#     To put object files in current directory, use a dot (.), do NOT make

-#     this an empty or blank macro!

-OBJDIR = .

-

-

-# Path to the LUFA library

-LUFA_PATH = ../..

-

-

-# LUFA library compile-time options and predefined tokens (add '-D' before each token)

-LUFA_OPTS = 

-

-

-# Create the LUFA source path variables by including the LUFA root makefile

-include $(LUFA_PATH)/LUFA/makefile

-

-

-# List C source files here. (C dependencies are automatically generated.)

-SRC = Test_C.c                   \

-      $(LUFA_SRC_USB)            \

-      $(LUFA_SRC_USBCLASS)

-

-

-# List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC = Test_CPP.cpp

-

-

-# List Assembler source files here.

-#     Make them always end in a capital .S.  Files ending in a lowercase .s

-#     will not be considered source files but generated files (assembler

-#     output from the compiler), and will be deleted upon "make clean"!

-#     Even though the DOS/Win* filesystem matches both .s and .S the same,

-#     it will preserve the spelling of the filenames, and gcc itself does

-#     care about how the name is spelled on its command-line.

-ASRC = Dummy.S                 \

-       $(LUFA_PATH)/LUFA/Platform/UC3/Exception.S

-

-

-# Optimization level, can be [0, 1, 2, 3, s]. 

-#     0 = turn off optimization. s = optimize for size.

-#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)

-OPT = 1

-

-

-# List any extra directories to look for include files here.

-#     Each directory must be seperated by a space.

-#     Use forward slashes for directory separators.

-#     For a directory that has spaces, enclose it in quotes.

-EXTRAINCDIRS = $(LUFA_PATH)/

-

-

-# Compiler flag to set the C Standard level.

-#     c89   = "ANSI" C

-#     gnu89 = c89 plus GCC extensions

-#     c99   = ISO C99 standard (not yet fully implemented)

-#     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=gnu99

-

-

-# Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_USB=$(F_USB)UL

-CDEFS += -DBOARD=BOARD_$(BOARD)

-CDEFS += -DARCH=ARCH_$(ARCH)

-CDEFS += $(LUFA_OPTS)

-

-

-# Place -D or -U options here for ASM sources

-ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_USB=$(F_USB)UL

-ADEFS += -DBOARD=BOARD_$(BOARD)

-ADEFS += -DARCH=ARCH_$(ARCH)

-ADEFS += $(LUFA_OPTS)

-

-# Place -D or -U options here for C++ sources

-CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_USB=$(F_USB)UL

-CPPDEFS += -DBOARD=BOARD_$(BOARD)

-CPPDEFS += -DARCH=ARCH_$(ARCH)

-CPPDEFS += $(LUFA_OPTS)

-

-

-# Debugging level.

-DEBUG = 3

-

-

-#---------------- Compiler Options C ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CFLAGS = -g$(DEBUG)

-CFLAGS += $(CDEFS)

-CFLAGS += -O$(OPT)

-CFLAGS += -funsigned-char

-CFLAGS += -funsigned-bitfields

-CFLAGS += -ffunction-sections

-CFLAGS += -fno-strict-aliasing

-CFLAGS += -masm-addr-pseudos

-#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)

-CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-CFLAGS += $(CSTANDARD)

-CFLAGS += -Werror

-CFLAGS += -Wall

-CFLAGS += -Wextra

-CFLAGS += -Wstrict-prototypes

-CFLAGS += -Wformat=2

-CFLAGS += -Winit-self

-CFLAGS += -Wswitch-enum

-CFLAGS += -Wunused

-CFLAGS += -Wundef

-CFLAGS += -Wpointer-arith

-CFLAGS += -Wcast-align

-CFLAGS += -Wwrite-strings

-CFLAGS += -Wlogical-op

-CFLAGS += -Wmissing-parameter-type

-CFLAGS += -Wmissing-declarations

-CFLAGS += -Wmissing-field-initializers

-CFLAGS += -Wmissing-format-attribute

-#CFLAGS += -Wredundant-decls

-CFLAGS += -Wnested-externs

-CFLAGS += -Woverlength-strings

-#CFLAGS += -Wswitch-default

-#CFLAGS += -Wc++-compat

-#CFLAGS += -Wcast-qual

-#CFLAGS += -Wconversion

-#CFLAGS += -Wjump-misses-init

-#CFLAGS += -pedantic

-

-

-#---------------- Compiler Options C++ ----------------

-#  -g*:          generate debugging information

-#  -O*:          optimization level

-#  -f...:        tuning, see GCC manual and avr-libc documentation

-#  -Wall...:     warning level

-#  -Wa,...:      tell GCC to pass this to the assembler.

-#    -adhlns...: create assembler listing

-CPPFLAGS = -g$(DEBUG)

-CPPFLAGS += $(CPPDEFS)

-CPPFLAGS += -O$(OPT)

-CPPFLAGS += -funsigned-char

-CPPFLAGS += -funsigned-bitfields

-CPPFLAGS += -ffunction-sections

-CPPFLAGS += -fno-strict-aliasing

-CPPFLAGS += -fno-exceptions

-CPPFLAGS += -masm-addr-pseudos

-CPPFLAGS += -Wall

-CPPFLAGS += -Wundef

-#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)

-CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))

-#CPPFLAGS += $(CSTANDARD)

-

-

-#---------------- Assembler Options ----------------

-#  -Wa,...:   tell GCC to pass this to the assembler.

-#  -adhlns:   create listing

-#  -gstabs:   have the assembler create line number information; note that

-#             for use in COFF files, additional information about filenames

-#             and function names needs to be present in the assembler source

-#             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 

-#       dump that will be displayed for a given single line of source input.

-ASFLAGS = $(ADEFS)

-#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100

-

-

-#---------------- Linker Options ----------------

-#  -Wl,...:     tell GCC to pass this to linker.

-#    -Map:      create map file

-#    --cref:    add cross reference to  map file

-#LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--gc-sections --rodata-writable

-LDFLAGS += -Wl,--direct-data

-#LDFLAGS += -T linker_script.x

-

-

-#============================================================================

-

-

-# Define programs and commands.

-SHELL = sh

-CC = avr32-gcc

-OBJCOPY = avr32-objcopy

-OBJDUMP = avr32-objdump

-SIZE = avr32-size

-AR = avr32-ar rcs

-NM = avr32-nm

-REMOVE = rm -f

-REMOVEDIR = rm -rf

-COPY = cp

-WINSHELL = cmd

-

-

-# Define Messages

-# English

-MSG_ERRORS_NONE = Errors: none

-MSG_BEGIN = -------- begin --------

-MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before: 

-MSG_SIZE_AFTER = Size after:

-MSG_COFF = Converting to AVR COFF:

-MSG_FLASH = Creating load file for Flash:

-MSG_EEPROM = Creating load file for EEPROM:

-MSG_EXTENDED_LISTING = Creating Extended Listing:

-MSG_SYMBOL_TABLE = Creating Symbol Table:

-MSG_LINKING = Linking:

-MSG_COMPILING = Compiling C:

-MSG_COMPILING_CPP = Compiling C++:

-MSG_ASSEMBLING = Assembling:

-MSG_CLEANING = Cleaning project:

-MSG_CREATING_LIBRARY = Creating library:

-

-

-

-

-# Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 

-

-# Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 

-

-

-# Compiler flags to generate dependency files.

-#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d

-

-

-# Combine all necessary flags and optional flags.

-# Add target processor to flags.

-ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)

-ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)

-ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)

-

-

-

-

-

-# Default target.

-all: begin gccversion sizebefore build sizeafter end

-

-# Change the build target to build a HEX file or a library.

-build: elf hex lss sym

-#build: lib

-

-

-elf: $(TARGET).elf

-hex: $(TARGET).hex

-lss: $(TARGET).lss

-sym: $(TARGET).sym

-LIBNAME=lib$(TARGET).a

-lib: $(LIBNAME)

-

-

-

-# Eye candy.

-# AVR Studio 3.x does not check make's exit code but relies on

-# the following magic strings to be generated by the compile job.

-begin:

-	@echo

-	@echo $(MSG_BEGIN)

-

-end:

-	@echo $(MSG_END)

-	@echo

-

-

-# Display size of file.

-HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex

-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf

-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )

-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )

-

-

-sizebefore:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-sizeafter:

-	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

-	2>/dev/null; echo; fi

-

-

-

-# Display compiler version information.

-gccversion : 

-	@$(CC) --version

-

-

-# Program the device.  

-flip: $(TARGET).hex

-	batchisp -hardware usb -device $(MCU) -operation erase f

-	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

-	batchisp -hardware usb -device $(MCU) -operation start reset 0

-

-dfu: $(TARGET).hex

-	dfu-programmer $(MCU) erase

-	dfu-programmer $(MCU) flash $(TARGET).hex

-	dfu-programmer $(MCU) reset

-

-

-# Create final output files (.hex, .eep) from ELF output file.

-%.hex: %.elf

-	@echo

-	@echo $(MSG_FLASH) $@

-	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@

-

-# Create extended listing file from ELF output file.

-%.lss: %.elf

-	@echo

-	@echo $(MSG_EXTENDED_LISTING) $@

-	$(OBJDUMP) -h -S -z $< > $@

-

-# Create a symbol table from ELF output file.

-%.sym: %.elf

-	@echo

-	@echo $(MSG_SYMBOL_TABLE) $@

-	$(NM) -n $< > $@

-

-

-

-# Create library from object files.

-.SECONDARY : $(TARGET).a

-.PRECIOUS : $(OBJ)

-%.a: $(OBJ)

-	@echo

-	@echo $(MSG_CREATING_LIBRARY) $@

-	$(AR) $@ $(OBJ)

-

-

-# Link: create ELF output file from object files.

-.SECONDARY : $(TARGET).elf

-.PRECIOUS : $(OBJ)

-%.elf: $(OBJ)

-	@echo

-	@echo $(MSG_LINKING) $@

-	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)

-

-

-# Compile: create object files from C source files.

-$(OBJDIR)/%.o : %.c

-	@echo

-	@echo $(MSG_COMPILING) $<

-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 

-

-

-# Compile: create object files from C++ source files.

-$(OBJDIR)/%.o : %.cpp

-	@echo

-	@echo $(MSG_COMPILING_CPP) $<

-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 

-

-

-# Compile: create assembler files from C source files.

-%.s : %.c

-	$(CC) -S $(ALL_CFLAGS) $< -o $@

-

-

-# Compile: create assembler files from C++ source files.

-%.s : %.cpp

-	$(CC) -S $(ALL_CPPFLAGS) $< -o $@

-

-

-# Assemble: create object files from assembler source files.

-$(OBJDIR)/%.o : %.S

-	@echo

-	@echo $(MSG_ASSEMBLING) $<

-	$(CC) -c $(ALL_ASFLAGS) $< -o $@

-

-

-# Create preprocessed source for use in sending a bug report.

-%.i : %.c

-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 

-

-

-# Target: clean project.

-clean: begin clean_list end

-

-clean_list :

-	@echo

-	@echo $(MSG_CLEANING)

-	$(REMOVE) $(TARGET).hex

-	$(REMOVE) $(TARGET).cof

-	$(REMOVE) $(TARGET).elf

-	$(REMOVE) $(TARGET).map

-	$(REMOVE) $(TARGET).sym

-	$(REMOVE) $(TARGET).lss

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

-	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

-	$(REMOVE) $(SRC:.c=.s)

-	$(REMOVE) $(SRC:.c=.d)

-	$(REMOVE) $(SRC:.c=.i)

-	$(REMOVEDIR) .dep

-

-doxygen:

-	@echo Generating Project Documentation \($(TARGET)\)...

-	@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \

-	  exit 1; \

-	fi;

-	@echo Documentation Generation Complete.

-

-clean_doxygen:

-	rm -rf Documentation

-

-checksource:

-	@for f in $(SRC) $(CPPSRC) $(ASRC); do \

-		if [ -f $$f ]; then \

-			echo "Found Source File: $$f" ; \

-		else \

-			echo "Source File Not Found: $$f" ; \

-		fi; done 

-

-

-# Create object files directory

-$(shell mkdir $(OBJDIR) 2>/dev/null)

-

-

-# Include the dependency files.

--include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)

-

-

-# Listing of phony targets.

-.PHONY : all begin finish end sizebefore sizeafter gccversion \

-build elf hex lss sym doxygen clean clean_list clean_doxygen  \

-dfu flip checksource

-

diff --git a/BuildTests/SingleUSBModeTest/makefile b/BuildTests/SingleUSBModeTest/makefile
index 096d4b3d1..56231c06a 100644
--- a/BuildTests/SingleUSBModeTest/makefile
+++ b/BuildTests/SingleUSBModeTest/makefile
@@ -6,11 +6,10 @@
 #           www.lufa-lib.org

 #

 

-# Makefile for the module build test. This test

-# attempts to build as many modules as possible

-# under all supported architectures, and include

-# all module headers in a simple C and C++

-# application.

+# Makefile for the single USB mode build test.

+# This test attempts to build the USB module

+# under fixed device and fixed host modes under

+# all supported architectures

 

 # Path to the LUFA library core

 LUFA_PATH         = ../../LUFA/

@@ -35,9 +34,9 @@ compile:
 	$(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CCFLAGS='-D USB_HOST_ONLY'

 

 clean:

-	$(MAKE) -s -f makefile.test clean ARCH=AVR8

-	$(MAKE) -s -f makefile.test clean ARCH=XMEGA

-	$(MAKE) -s -f makefile.test clean ARCH=UC3

+	$(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287

+	$(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u

+	$(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256

 

 %:

 

diff --git a/BuildTests/SingleUSBModeTest/makefile.test b/BuildTests/SingleUSBModeTest/makefile.test
index 0a0c0be3b..d8b9be5b4 100644
--- a/BuildTests/SingleUSBModeTest/makefile.test
+++ b/BuildTests/SingleUSBModeTest/makefile.test
@@ -9,10 +9,10 @@
 #         LUFA Project Makefile.

 # --------------------------------------

 

-MCU          = at90usb1287

-ARCH         = AVR8

+MCU          = 

+ARCH         = 

 BOARD        = NONE

-F_CPU        = 8000000

+F_CPU        = $(F_USB)

 

 ifeq ($(ARCH), AVR8)

 F_USB        = 8000000

diff --git a/BuildTests/StaticAnalysisTest/makefile b/BuildTests/StaticAnalysisTest/makefile
index aecb67792..d2151eed1 100644
--- a/BuildTests/StaticAnalysisTest/makefile
+++ b/BuildTests/StaticAnalysisTest/makefile
@@ -29,6 +29,7 @@ end:
 	@echo

 

 %:

+	

 

 .PHONY: all begin end

 

diff --git a/LUFA/CodeTemplates/makefile_template b/LUFA/CodeTemplates/makefile_template
index 0be15b2c9..25a41dd15 100644
--- a/LUFA/CodeTemplates/makefile_template
+++ b/LUFA/CodeTemplates/makefile_template
@@ -16,7 +16,7 @@ F_CPU        = 8000000
 F_USB        = $(F_CPU)

 OPTIMIZATION = s

 TARGET       = Target

-SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

+SRC          = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_PLATFORM)

 LUFA_PATH    = ../../LUFA/

 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/

 LD_FLAGS     =