From 000c4c6c5ccc2c136f25fc4bcede6de093b301c6 Mon Sep 17 00:00:00 2001 From: Dean Camera Date: Tue, 5 Jun 2012 18:35:05 +0000 Subject: Strip out BuildTest sub-makefile contents as much as possible. Remove old UC3 build test makefile from the ModuleTest build test. Add platform module to the example LUFA makefile. --- BuildTests/BoardDriverTest/makefile | 6 +- BuildTests/BoardDriverTest/makefile.test | 10 +- BuildTests/ModuleTest/makefile | 6 +- BuildTests/ModuleTest/makefile.test | 15 +- BuildTests/ModuleTest/makefile.uc3 | 513 ----------------------------- BuildTests/SingleUSBModeTest/makefile | 15 +- BuildTests/SingleUSBModeTest/makefile.test | 6 +- BuildTests/StaticAnalysisTest/makefile | 1 + LUFA/CodeTemplates/makefile_template | 2 +- 9 files changed, 30 insertions(+), 544 deletions(-) delete mode 100644 BuildTests/ModuleTest/makefile.uc3 diff --git a/BuildTests/BoardDriverTest/makefile b/BuildTests/BoardDriverTest/makefile index 54afa5755..6ed32a47e 100644 --- a/BuildTests/BoardDriverTest/makefile +++ b/BuildTests/BoardDriverTest/makefile @@ -54,9 +54,9 @@ testboards: clean: rm -f BuildMakefile rm -f BoardList.txt - $(MAKE) -s -f makefile.test clean ARCH=AVR8 - $(MAKE) -s -f makefile.test clean ARCH=XMEGA - $(MAKE) -s -f makefile.test clean ARCH=UC3 + $(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287 + $(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u + $(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256 %: diff --git a/BuildTests/BoardDriverTest/makefile.test b/BuildTests/BoardDriverTest/makefile.test index 60e97397d..11d0372ef 100644 --- a/BuildTests/BoardDriverTest/makefile.test +++ b/BuildTests/BoardDriverTest/makefile.test @@ -9,11 +9,11 @@ # LUFA Project Makefile. # -------------------------------------- -MCU = at90usb1287 -ARCH = AVR8 -BOARD = NONE -F_CPU = 8000000 -F_USB = $(F_CPU) +MCU = +ARCH = +BOARD = +F_CPU = $(F_USB) +F_USB = 8000000 OPTIMIZATION = 1 TARGET = Test SRC = $(TARGET).c diff --git a/BuildTests/ModuleTest/makefile b/BuildTests/ModuleTest/makefile index a756c309c..93a49e8d9 100644 --- a/BuildTests/ModuleTest/makefile +++ b/BuildTests/ModuleTest/makefile @@ -48,9 +48,9 @@ end: $(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=$(@:%.uc3=%) clean: - $(MAKE) -s -f makefile.test clean ARCH=AVR8 - $(MAKE) -s -f makefile.test clean ARCH=XMEGA - $(MAKE) -s -f makefile.test clean ARCH=UC3 + $(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=$(firstword $(AVR8_FAMILIES)) + $(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=$(firstword $(XMEGA_FAMILIES)) + $(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=$(firstword $(UC3_FAMILIES)) %: diff --git a/BuildTests/ModuleTest/makefile.test b/BuildTests/ModuleTest/makefile.test index b3307f897..f92ef9c33 100644 --- a/BuildTests/ModuleTest/makefile.test +++ b/BuildTests/ModuleTest/makefile.test @@ -9,10 +9,14 @@ # LUFA Project Makefile. # -------------------------------------- -MCU = at90usb1287 -ARCH = AVR8 +MCU = +ARCH = BOARD = NONE -F_CPU = 8000000 +F_CPU = $(F_USB) +OPTIMIZATION = 1 +TARGET = Test +SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB) +LUFA_PATH = ../../LUFA/ ifeq ($(ARCH), AVR8) F_USB = 8000000 @@ -22,11 +26,6 @@ else ifeq ($(ARCH), UC3) F_USB = 48000000 endif -OPTIMIZATION = 1 -TARGET = Test -SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB) -LUFA_PATH = ../../LUFA/ - # Generic C/C++ compiler flags CC_FLAGS = -Wextra CC_FLAGS += -Werror diff --git a/BuildTests/ModuleTest/makefile.uc3 b/BuildTests/ModuleTest/makefile.uc3 deleted file mode 100644 index 5628748ee..000000000 --- a/BuildTests/ModuleTest/makefile.uc3 +++ /dev/null @@ -1,513 +0,0 @@ -# Hey Emacs, this is a -*- makefile -*- -#---------------------------------------------------------------------------- -# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. -# >> Modified for use with the LUFA project. << -# -# Released to the Public Domain -# -# Additional material for this makefile was written by: -# Peter Fleury -# Tim Henigan -# Colin O'Flynn -# Reiner Patommel -# Markus Pfaff -# Sander Pool -# Frederik Rouleau -# Carlos Lamas -# Dean Camera -# Opendous Inc. -# Denver Gingerich -# -#---------------------------------------------------------------------------- -# On command line: -# -# make all = Make software. -# -# make clean = Clean out built project files. -# -# make dfu = Download the hex file to the device, using dfu-programmer (must -# have dfu-programmer installed). -# -# make flip = Download the hex file to the device, using Atmel FLIP (must -# have Atmel FLIP installed). -# -# make doxygen = Generate DoxyGen documentation for the project (must have -# DoxyGen installed) -# -# make filename.s = Just compile filename.c into the assembler code only. -# -# make filename.i = Create a preprocessed source file for use in submitting -# bug reports to the GCC project. -# -# To rebuild project do "make clean" then "make all". -#---------------------------------------------------------------------------- - - -# MCU name -MCU = uc3a3256 - - -# Targeted chip architecture (see library "Architectures" documentation) -ARCH = UC3 - - -# Target board (see library "Board Types" documentation, NONE for projects not requiring -# LUFA board drivers). If USER is selected, put custom board drivers in a directory called -# "Board" inside the application directory. -BOARD = NONE - - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This should be the frequency the system core runs at, after the system clock -# has been set up correctly and started. -F_CPU = 12000000 - - -# USB controller master clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency of the USB controller's clock generator in Hz. -# -# For the UC3 chips, this should be equal to 48MHz or 96MHz. -F_USB = 48000000 - - -# Output format. (can be srec, ihex, binary) -FORMAT = ihex - - -# Target file name (without extension). -TARGET = Test - - -# Object files directory -# To put object files in current directory, use a dot (.), do NOT make -# this an empty or blank macro! -OBJDIR = . - - -# Path to the LUFA library -LUFA_PATH = ../.. - - -# LUFA library compile-time options and predefined tokens (add '-D' before each token) -LUFA_OPTS = - - -# Create the LUFA source path variables by including the LUFA root makefile -include $(LUFA_PATH)/LUFA/makefile - - -# List C source files here. (C dependencies are automatically generated.) -SRC = Test_C.c \ - $(LUFA_SRC_USB) \ - $(LUFA_SRC_USBCLASS) - - -# List C++ source files here. (C dependencies are automatically generated.) -CPPSRC = Test_CPP.cpp - - -# List Assembler source files here. -# Make them always end in a capital .S. Files ending in a lowercase .s -# will not be considered source files but generated files (assembler -# output from the compiler), and will be deleted upon "make clean"! -# Even though the DOS/Win* filesystem matches both .s and .S the same, -# it will preserve the spelling of the filenames, and gcc itself does -# care about how the name is spelled on its command-line. -ASRC = Dummy.S \ - $(LUFA_PATH)/LUFA/Platform/UC3/Exception.S - - -# Optimization level, can be [0, 1, 2, 3, s]. -# 0 = turn off optimization. s = optimize for size. -# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) -OPT = 1 - - -# List any extra directories to look for include files here. -# Each directory must be seperated by a space. -# Use forward slashes for directory separators. -# For a directory that has spaces, enclose it in quotes. -EXTRAINCDIRS = $(LUFA_PATH)/ - - -# Compiler flag to set the C Standard level. -# c89 = "ANSI" C -# gnu89 = c89 plus GCC extensions -# c99 = ISO C99 standard (not yet fully implemented) -# gnu99 = c99 plus GCC extensions -CSTANDARD = -std=gnu99 - - -# Place -D or -U options here for C sources -CDEFS = -DF_CPU=$(F_CPU)UL -CDEFS += -DF_USB=$(F_USB)UL -CDEFS += -DBOARD=BOARD_$(BOARD) -CDEFS += -DARCH=ARCH_$(ARCH) -CDEFS += $(LUFA_OPTS) - - -# Place -D or -U options here for ASM sources -ADEFS = -DF_CPU=$(F_CPU) -ADEFS += -DF_USB=$(F_USB)UL -ADEFS += -DBOARD=BOARD_$(BOARD) -ADEFS += -DARCH=ARCH_$(ARCH) -ADEFS += $(LUFA_OPTS) - -# Place -D or -U options here for C++ sources -CPPDEFS = -DF_CPU=$(F_CPU)UL -CPPDEFS += -DF_USB=$(F_USB)UL -CPPDEFS += -DBOARD=BOARD_$(BOARD) -CPPDEFS += -DARCH=ARCH_$(ARCH) -CPPDEFS += $(LUFA_OPTS) - - -# Debugging level. -DEBUG = 3 - - -#---------------- Compiler Options C ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CFLAGS = -g$(DEBUG) -CFLAGS += $(CDEFS) -CFLAGS += -O$(OPT) -CFLAGS += -funsigned-char -CFLAGS += -funsigned-bitfields -CFLAGS += -ffunction-sections -CFLAGS += -fno-strict-aliasing -CFLAGS += -masm-addr-pseudos -#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) -CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -CFLAGS += $(CSTANDARD) -CFLAGS += -Werror -CFLAGS += -Wall -CFLAGS += -Wextra -CFLAGS += -Wstrict-prototypes -CFLAGS += -Wformat=2 -CFLAGS += -Winit-self -CFLAGS += -Wswitch-enum -CFLAGS += -Wunused -CFLAGS += -Wundef -CFLAGS += -Wpointer-arith -CFLAGS += -Wcast-align -CFLAGS += -Wwrite-strings -CFLAGS += -Wlogical-op -CFLAGS += -Wmissing-parameter-type -CFLAGS += -Wmissing-declarations -CFLAGS += -Wmissing-field-initializers -CFLAGS += -Wmissing-format-attribute -#CFLAGS += -Wredundant-decls -CFLAGS += -Wnested-externs -CFLAGS += -Woverlength-strings -#CFLAGS += -Wswitch-default -#CFLAGS += -Wc++-compat -#CFLAGS += -Wcast-qual -#CFLAGS += -Wconversion -#CFLAGS += -Wjump-misses-init -#CFLAGS += -pedantic - - -#---------------- Compiler Options C++ ---------------- -# -g*: generate debugging information -# -O*: optimization level -# -f...: tuning, see GCC manual and avr-libc documentation -# -Wall...: warning level -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing -CPPFLAGS = -g$(DEBUG) -CPPFLAGS += $(CPPDEFS) -CPPFLAGS += -O$(OPT) -CPPFLAGS += -funsigned-char -CPPFLAGS += -funsigned-bitfields -CPPFLAGS += -ffunction-sections -CPPFLAGS += -fno-strict-aliasing -CPPFLAGS += -fno-exceptions -CPPFLAGS += -masm-addr-pseudos -CPPFLAGS += -Wall -CPPFLAGS += -Wundef -#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) -CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) -#CPPFLAGS += $(CSTANDARD) - - -#---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. -ASFLAGS = $(ADEFS) -#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 - - -#---------------- Linker Options ---------------- -# -Wl,...: tell GCC to pass this to linker. -# -Map: create map file -# --cref: add cross reference to map file -#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref -LDFLAGS += -Wl,--gc-sections --rodata-writable -LDFLAGS += -Wl,--direct-data -#LDFLAGS += -T linker_script.x - - -#============================================================================ - - -# Define programs and commands. -SHELL = sh -CC = avr32-gcc -OBJCOPY = avr32-objcopy -OBJDUMP = avr32-objdump -SIZE = avr32-size -AR = avr32-ar rcs -NM = avr32-nm -REMOVE = rm -f -REMOVEDIR = rm -rf -COPY = cp -WINSHELL = cmd - - -# Define Messages -# English -MSG_ERRORS_NONE = Errors: none -MSG_BEGIN = -------- begin -------- -MSG_END = -------- end -------- -MSG_SIZE_BEFORE = Size before: -MSG_SIZE_AFTER = Size after: -MSG_COFF = Converting to AVR COFF: -MSG_FLASH = Creating load file for Flash: -MSG_EEPROM = Creating load file for EEPROM: -MSG_EXTENDED_LISTING = Creating Extended Listing: -MSG_SYMBOL_TABLE = Creating Symbol Table: -MSG_LINKING = Linking: -MSG_COMPILING = Compiling C: -MSG_COMPILING_CPP = Compiling C++: -MSG_ASSEMBLING = Assembling: -MSG_CLEANING = Cleaning project: -MSG_CREATING_LIBRARY = Creating library: - - - - -# Define all object files. -OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - -# Define all listing files. -LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - - -# Compiler flags to generate dependency files. -#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d - - -# Combine all necessary flags and optional flags. -# Add target processor to flags. -ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) -ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) -ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) - - - - - -# Default target. -all: begin gccversion sizebefore build sizeafter end - -# Change the build target to build a HEX file or a library. -build: elf hex lss sym -#build: lib - - -elf: $(TARGET).elf -hex: $(TARGET).hex -lss: $(TARGET).lss -sym: $(TARGET).sym -LIBNAME=lib$(TARGET).a -lib: $(LIBNAME) - - - -# Eye candy. -# AVR Studio 3.x does not check make's exit code but relies on -# the following magic strings to be generated by the compile job. -begin: - @echo - @echo $(MSG_BEGIN) - -end: - @echo $(MSG_END) - @echo - - -# Display size of file. -HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex -ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf -MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) - - -sizebefore: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ - 2>/dev/null; echo; fi - -sizeafter: - @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ - 2>/dev/null; echo; fi - - - -# Display compiler version information. -gccversion : - @$(CC) --version - - -# Program the device. -flip: $(TARGET).hex - batchisp -hardware usb -device $(MCU) -operation erase f - batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -dfu: $(TARGET).hex - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash $(TARGET).hex - dfu-programmer $(MCU) reset - - -# Create final output files (.hex, .eep) from ELF output file. -%.hex: %.elf - @echo - @echo $(MSG_FLASH) $@ - $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ - -# Create extended listing file from ELF output file. -%.lss: %.elf - @echo - @echo $(MSG_EXTENDED_LISTING) $@ - $(OBJDUMP) -h -S -z $< > $@ - -# Create a symbol table from ELF output file. -%.sym: %.elf - @echo - @echo $(MSG_SYMBOL_TABLE) $@ - $(NM) -n $< > $@ - - - -# Create library from object files. -.SECONDARY : $(TARGET).a -.PRECIOUS : $(OBJ) -%.a: $(OBJ) - @echo - @echo $(MSG_CREATING_LIBRARY) $@ - $(AR) $@ $(OBJ) - - -# Link: create ELF output file from object files. -.SECONDARY : $(TARGET).elf -.PRECIOUS : $(OBJ) -%.elf: $(OBJ) - @echo - @echo $(MSG_LINKING) $@ - $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) - - -# Compile: create object files from C source files. -$(OBJDIR)/%.o : %.c - @echo - @echo $(MSG_COMPILING) $< - $(CC) -c $(ALL_CFLAGS) $< -o $@ - - -# Compile: create object files from C++ source files. -$(OBJDIR)/%.o : %.cpp - @echo - @echo $(MSG_COMPILING_CPP) $< - $(CC) -c $(ALL_CPPFLAGS) $< -o $@ - - -# Compile: create assembler files from C source files. -%.s : %.c - $(CC) -S $(ALL_CFLAGS) $< -o $@ - - -# Compile: create assembler files from C++ source files. -%.s : %.cpp - $(CC) -S $(ALL_CPPFLAGS) $< -o $@ - - -# Assemble: create object files from assembler source files. -$(OBJDIR)/%.o : %.S - @echo - @echo $(MSG_ASSEMBLING) $< - $(CC) -c $(ALL_ASFLAGS) $< -o $@ - - -# Create preprocessed source for use in sending a bug report. -%.i : %.c - $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ - - -# Target: clean project. -clean: begin clean_list end - -clean_list : - @echo - @echo $(MSG_CLEANING) - $(REMOVE) $(TARGET).hex - $(REMOVE) $(TARGET).cof - $(REMOVE) $(TARGET).elf - $(REMOVE) $(TARGET).map - $(REMOVE) $(TARGET).sym - $(REMOVE) $(TARGET).lss - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) - $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) - $(REMOVE) $(SRC:.c=.s) - $(REMOVE) $(SRC:.c=.d) - $(REMOVE) $(SRC:.c=.i) - $(REMOVEDIR) .dep - -doxygen: - @echo Generating Project Documentation \($(TARGET)\)... - @if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ - exit 1; \ - fi; - @echo Documentation Generation Complete. - -clean_doxygen: - rm -rf Documentation - -checksource: - @for f in $(SRC) $(CPPSRC) $(ASRC); do \ - if [ -f $$f ]; then \ - echo "Found Source File: $$f" ; \ - else \ - echo "Source File Not Found: $$f" ; \ - fi; done - - -# Create object files directory -$(shell mkdir $(OBJDIR) 2>/dev/null) - - -# Include the dependency files. --include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) - - -# Listing of phony targets. -.PHONY : all begin finish end sizebefore sizeafter gccversion \ -build elf hex lss sym doxygen clean clean_list clean_doxygen \ -dfu flip checksource - diff --git a/BuildTests/SingleUSBModeTest/makefile b/BuildTests/SingleUSBModeTest/makefile index 096d4b3d1..56231c06a 100644 --- a/BuildTests/SingleUSBModeTest/makefile +++ b/BuildTests/SingleUSBModeTest/makefile @@ -6,11 +6,10 @@ # www.lufa-lib.org # -# Makefile for the module build test. This test -# attempts to build as many modules as possible -# under all supported architectures, and include -# all module headers in a simple C and C++ -# application. +# Makefile for the single USB mode build test. +# This test attempts to build the USB module +# under fixed device and fixed host modes under +# all supported architectures # Path to the LUFA library core LUFA_PATH = ../../LUFA/ @@ -35,9 +34,9 @@ compile: $(MAKE) -s -f makefile.test clean elf ARCH=UC3 MCU=uc3a0256 CCFLAGS='-D USB_HOST_ONLY' clean: - $(MAKE) -s -f makefile.test clean ARCH=AVR8 - $(MAKE) -s -f makefile.test clean ARCH=XMEGA - $(MAKE) -s -f makefile.test clean ARCH=UC3 + $(MAKE) -s -f makefile.test clean ARCH=AVR8 MCU=at90usb1287 + $(MAKE) -s -f makefile.test clean ARCH=XMEGA MCU=atxmega128a1u + $(MAKE) -s -f makefile.test clean ARCH=UC3 MCU=uc3a0256 %: diff --git a/BuildTests/SingleUSBModeTest/makefile.test b/BuildTests/SingleUSBModeTest/makefile.test index 0a0c0be3b..d8b9be5b4 100644 --- a/BuildTests/SingleUSBModeTest/makefile.test +++ b/BuildTests/SingleUSBModeTest/makefile.test @@ -9,10 +9,10 @@ # LUFA Project Makefile. # -------------------------------------- -MCU = at90usb1287 -ARCH = AVR8 +MCU = +ARCH = BOARD = NONE -F_CPU = 8000000 +F_CPU = $(F_USB) ifeq ($(ARCH), AVR8) F_USB = 8000000 diff --git a/BuildTests/StaticAnalysisTest/makefile b/BuildTests/StaticAnalysisTest/makefile index aecb67792..d2151eed1 100644 --- a/BuildTests/StaticAnalysisTest/makefile +++ b/BuildTests/StaticAnalysisTest/makefile @@ -29,6 +29,7 @@ end: @echo %: + .PHONY: all begin end diff --git a/LUFA/CodeTemplates/makefile_template b/LUFA/CodeTemplates/makefile_template index 0be15b2c9..25a41dd15 100644 --- a/LUFA/CodeTemplates/makefile_template +++ b/LUFA/CodeTemplates/makefile_template @@ -16,7 +16,7 @@ F_CPU = 8000000 F_USB = $(F_CPU) OPTIMIZATION = s TARGET = Target -SRC = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +SRC = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_PLATFORM) LUFA_PATH = ../../LUFA/ CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ LD_FLAGS = -- cgit v1.2.3