diff options
Diffstat (limited to 'testhal/STM8S/SPI/demo')
| -rw-r--r-- | testhal/STM8S/SPI/demo/chconf.h | 531 | ||||
| -rw-r--r-- | testhal/STM8S/SPI/demo/halconf.h | 312 | ||||
| -rw-r--r-- | testhal/STM8S/SPI/demo/main.c | 87 | ||||
| -rw-r--r-- | testhal/STM8S/SPI/demo/mcuconf.h | 47 |
4 files changed, 0 insertions, 977 deletions
diff --git a/testhal/STM8S/SPI/demo/chconf.h b/testhal/STM8S/SPI/demo/chconf.h deleted file mode 100644 index f943ea80c..000000000 --- a/testhal/STM8S/SPI/demo/chconf.h +++ /dev/null @@ -1,531 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef _CHCONF_H_
-#define _CHCONF_H_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#if !defined(CH_FREQUENCY) || defined(__DOXYGEN__)
-#define CH_FREQUENCY 1000
-#endif
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- *
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- */
-#if !defined(CH_TIME_QUANTUM) || defined(__DOXYGEN__)
-#define CH_TIME_QUANTUM 20
-#endif
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_USE_MEMCORE.
- */
-#if !defined(CH_MEMCORE_SIZE) || defined(__DOXYGEN__)
-#define CH_MEMCORE_SIZE 0
-#endif
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread automatically. The application has
- * then the responsibility to do one of the following:
- * - Spawn a custom idle thread at priority @p IDLEPRIO.
- * - Change the main() thread priority to @p IDLEPRIO then enter
- * an endless loop. In this scenario the @p main() thread acts as
- * the idle thread.
- * .
- * @note Unless an idle thread is spawned the @p main() thread must not
- * enter a sleep state.
- */
-#if !defined(CH_NO_IDLE_THREAD) || defined(__DOXYGEN__)
-#define CH_NO_IDLE_THREAD FALSE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#if !defined(CH_OPTIMIZE_SPEED) || defined(__DOXYGEN__)
-#define CH_OPTIMIZE_SPEED TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_REGISTRY) || defined(__DOXYGEN__)
-#define CH_USE_REGISTRY TRUE
-#endif
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_WAITEXIT) || defined(__DOXYGEN__)
-#define CH_USE_WAITEXIT TRUE
-#endif
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_SEMAPHORES) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES TRUE
-#endif
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMAPHORES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_SEMAPHORES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Atomic semaphore API.
- * @details If enabled then the semaphores the @p chSemSignalWait() API
- * is included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_SEMSW) || defined(__DOXYGEN__)
-#define CH_USE_SEMSW TRUE
-#endif
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MUTEXES) || defined(__DOXYGEN__)
-#define CH_USE_MUTEXES TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MUTEXES.
- */
-#if !defined(CH_USE_CONDVARS) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS TRUE
-#endif
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_CONDVARS.
- */
-#if !defined(CH_USE_CONDVARS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_CONDVARS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_EVENTS) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS TRUE
-#endif
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_EVENTS.
- */
-#if !defined(CH_USE_EVENTS_TIMEOUT) || defined(__DOXYGEN__)
-#define CH_USE_EVENTS_TIMEOUT TRUE
-#endif
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MESSAGES) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES TRUE
-#endif
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special requirements.
- * @note Requires @p CH_USE_MESSAGES.
- */
-#if !defined(CH_USE_MESSAGES_PRIORITY) || defined(__DOXYGEN__)
-#define CH_USE_MESSAGES_PRIORITY FALSE
-#endif
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_SEMAPHORES.
- */
-#if !defined(CH_USE_MAILBOXES) || defined(__DOXYGEN__)
-#define CH_USE_MAILBOXES TRUE
-#endif
-
-/**
- * @brief I/O Queues APIs.
- * @details If enabled then the I/O queues APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_QUEUES) || defined(__DOXYGEN__)
-#define CH_USE_QUEUES TRUE
-#endif
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMCORE) || defined(__DOXYGEN__)
-#define CH_USE_MEMCORE TRUE
-#endif
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_MEMCORE and either @p CH_USE_MUTEXES or
- * @p CH_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#if !defined(CH_USE_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_HEAP TRUE
-#endif
-
-/**
- * @brief C-runtime allocator.
- * @details If enabled the the heap allocator APIs just wrap the C-runtime
- * @p malloc() and @p free() functions.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_USE_HEAP.
- * @note The C-runtime may or may not require @p CH_USE_MEMCORE, see the
- * appropriate documentation.
- */
-#if !defined(CH_USE_MALLOC_HEAP) || defined(__DOXYGEN__)
-#define CH_USE_MALLOC_HEAP FALSE
-#endif
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#if !defined(CH_USE_MEMPOOLS) || defined(__DOXYGEN__)
-#define CH_USE_MEMPOOLS TRUE
-#endif
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_USE_WAITEXIT.
- * @note Requires @p CH_USE_HEAP and/or @p CH_USE_MEMPOOLS.
- */
-#if !defined(CH_USE_DYNAMIC) || defined(__DOXYGEN__)
-#define CH_USE_DYNAMIC TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_SYSTEM_STATE_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_CHECKS FALSE
-#endif
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_ASSERTS FALSE
-#endif
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the context switch circular trace buffer is
- * activated.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_ENABLE_TRACE) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_TRACE FALSE
-#endif
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#if !defined(CH_DBG_ENABLE_STACK_CHECK) || defined(__DOXYGEN__)
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-#endif
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#if !defined(CH_DBG_FILL_THREADS) || defined(__DOXYGEN__)
-#define CH_DBG_FILL_THREADS FALSE
-#endif
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p Thread structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p TRUE.
- * @note This debug option is defaulted to TRUE because it is required by
- * some test cases into the test suite.
- */
-#if !defined(CH_DBG_THREADS_PROFILING) || defined(__DOXYGEN__)
-#define CH_DBG_THREADS_PROFILING TRUE
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p Thread structure.
- */
-#if !defined(THREAD_EXT_FIELDS) || defined(__DOXYGEN__)
-#define THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-#endif
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#if !defined(THREAD_EXT_INIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-#endif
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- *
- * @note It is inserted into lock zone.
- * @note It is also invoked when the threads simply return in order to
- * terminate.
- */
-#if !defined(THREAD_EXT_EXIT_HOOK) || defined(__DOXYGEN__)
-#define THREAD_EXT_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-#endif
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#if !defined(THREAD_CONTEXT_SWITCH_HOOK) || defined(__DOXYGEN__)
-#define THREAD_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* System halt code here.*/ \
-}
-#endif
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#if !defined(IDLE_LOOP_HOOK) || defined(__DOXYGEN__)
-#define IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-#endif
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#if !defined(SYSTEM_TICK_EVENT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_TICK_EVENT_HOOK() { \
- /* System tick event code here.*/ \
-}
-#endif
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#if !defined(SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define SYSTEM_HALT_HOOK() { \
- /* System halt code here.*/ \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/testhal/STM8S/SPI/demo/halconf.h b/testhal/STM8S/SPI/demo/halconf.h deleted file mode 100644 index fdc079aef..000000000 --- a/testhal/STM8S/SPI/demo/halconf.h +++ /dev/null @@ -1,312 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the TM subsystem.
- */
-#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
-#define HAL_USE_TM FALSE
-#endif
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI TRUE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/testhal/STM8S/SPI/demo/main.c b/testhal/STM8S/SPI/demo/main.c deleted file mode 100644 index b1e8b6ed1..000000000 --- a/testhal/STM8S/SPI/demo/main.c +++ /dev/null @@ -1,87 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-
-/*
- * SPI configuration (8MHz, CPHA=0, CPOL=0, MSb first).
- */
-static ROMCONST SPIConfig spicfg = {
- NULL,
- GPIOD,
- PD_LD10,
- 0
-};
-
-/*
- * Transmit data.
- */
-static ROMCONST uint8_t digits[32] = {
- 0x24, 0xAF, 0xE0, 0xA2, 0x2B, 0x32, 0x30, 0xA7,
- 0x20, 0x22, 0x21, 0x38, 0x74, 0xA8, 0x70, 0x71,
- 0x04, 0x8F, 0xC0, 0x82, 0x0B, 0x12, 0x10, 0x87,
- 0x00, 0x02, 0x01, 0x18, 0x54, 0x88, 0x50, 0x51
-};
-
-/*
- * Receive buffer.
- */
-static uint8_t buffer[32];
-
-/*
- * Application entry point.
- */
-void main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- halInit();
- chSysInit();
-
- /*
- * OS initialization.
- */
- chSysInit();
-
- /*
- * Activates the SPI driver 1 using the driver default configuration.
- */
- spiStart(&SPID1, &spicfg);
-
- /*
- * Normal main() thread activity.
- */
- while (TRUE) {
- volatile uint8_t b;
-
- chThdSleepMilliseconds(1000);
- /* Exchanging data, if the pins MISO and MOSI are connected then the
- transmitted data is received back into the buffer. On the
- STM8S-Discovery board the pins are CN2-9 and CN2-10.*/
- spiSelect(&SPID1);
- spiExchange(&SPID1, sizeof(digits), digits, buffer);
- /* Polled transfers test.*/
- b = spiPolledExchange(&SPID1, 0x55);
- b = spiPolledExchange(&SPID1, 0xAA);
- spiUnselect(&SPID1);
- }
-}
diff --git a/testhal/STM8S/SPI/demo/mcuconf.h b/testhal/STM8S/SPI/demo/mcuconf.h deleted file mode 100644 index c09874c9b..000000000 --- a/testhal/STM8S/SPI/demo/mcuconf.h +++ /dev/null @@ -1,47 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/*
- * STM8 drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- */
-
-/*
- * HAL general settings.
- */
-#define STM8S_NO_CLOCK_INIT FALSE
-#define STM8S_HSI_ENABLED FALSE
-#define STM8S_LSI_ENABLED TRUE
-#define STM8S_HSE_ENABLED TRUE
-#define STM8S_SYSCLK_SOURCE CLK_SYSSEL_HSE
-#define STM8S_HSI_DIVIDER CLK_HSI_DIV1
-#define STM8S_CPU_DIVIDER CLK_CPU_DIV1
-
-/*
- * SERIAL driver system settings.
- */
-#define STM8S_SERIAL_USE_UART1 FALSE
-#define STM8S_SERIAL_USE_UART2 TRUE
-#define STM8S_SERIAL_USE_UART3 FALSE
-
-/*
- * SPI driver system settings.
- */
-#define STM8S_SPI_USE_SPI TRUE
-#define STM8S_SPI_ERROR_HOOK(spip) chSysHalt()
|