diff options
Diffstat (limited to 'os/hal')
31 files changed, 699 insertions, 753 deletions
diff --git a/os/hal/boards/ST_NUCLEO64_F030R8/board.h b/os/hal/boards/ST_NUCLEO64_F030R8/board.h index d5b648045..fb79dd5f7 100644 --- a/os/hal/boards/ST_NUCLEO64_F030R8/board.h +++ b/os/hal/boards/ST_NUCLEO64_F030R8/board.h @@ -85,9 +85,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -179,9 +177,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -222,11 +218,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 1).
* PA3 - ARD_D0 USART2_RX (alternate 1).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -239,11 +235,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -287,11 +283,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -339,7 +335,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -347,8 +343,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 1).
- * PB9 - ARD_D14 I2C1_SDA (alternate 1).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -356,7 +352,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -364,8 +360,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -404,7 +400,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -412,8 +408,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -444,8 +440,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 1) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 1) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -456,8 +452,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN11 (analog).
- * PC1 - ARD_A4 ADC1_IN10 (analog).
+ * PC0 - ARD_A5 ADC1_IN11 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN10 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -473,8 +469,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -521,8 +517,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F030R8/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F030R8/cfg/board.chcfg index d193299ac..a058ffc3e 100644 --- a/os/hal/boards/ST_NUCLEO64_F030R8/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F030R8/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN10" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F070RB/board.h b/os/hal/boards/ST_NUCLEO64_F070RB/board.h index 9c28befd1..7c0074dda 100644 --- a/os/hal/boards/ST_NUCLEO64_F070RB/board.h +++ b/os/hal/boards/ST_NUCLEO64_F070RB/board.h @@ -84,9 +84,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -194,9 +192,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -238,11 +234,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 1).
* PA3 - ARD_D0 USART2_RX (alternate 1).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -255,11 +251,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -303,11 +299,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -355,7 +351,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -363,8 +359,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 1).
- * PB9 - ARD_D14 I2C1_SDA (alternate 1).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -372,7 +368,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -380,8 +376,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -420,7 +416,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -428,8 +424,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -460,8 +456,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 1) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 1) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -472,8 +468,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN11 (analog).
- * PC1 - ARD_A4 ADC1_IN10 (analog).
+ * PC0 - ARD_A5 ADC1_IN11 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN10 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -489,8 +485,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -537,8 +533,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F070RB/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F070RB/cfg/board.chcfg index 64f0e598e..2ec985930 100644 --- a/os/hal/boards/ST_NUCLEO64_F070RB/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F070RB/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN10" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F072RB/board.h b/os/hal/boards/ST_NUCLEO64_F072RB/board.h index f9149f21b..2ed9bc722 100644 --- a/os/hal/boards/ST_NUCLEO64_F072RB/board.h +++ b/os/hal/boards/ST_NUCLEO64_F072RB/board.h @@ -84,9 +84,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -194,9 +192,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -238,11 +234,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 1).
* PA3 - ARD_D0 USART2_RX (alternate 1).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -255,11 +251,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -303,11 +299,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -355,7 +351,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -363,8 +359,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 1).
- * PB9 - ARD_D14 I2C1_SDA (alternate 1).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -372,7 +368,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -380,8 +376,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -420,7 +416,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -428,8 +424,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -460,8 +456,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 1) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 1) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -472,8 +468,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN11 (analog).
- * PC1 - ARD_A4 ADC1_IN10 (analog).
+ * PC0 - ARD_A5 ADC1_IN11 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN10 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -489,8 +485,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -537,8 +533,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F072RB/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F072RB/cfg/board.chcfg index f5a33182b..4bd4a0d31 100644 --- a/os/hal/boards/ST_NUCLEO64_F072RB/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F072RB/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN10" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F091RC/board.h b/os/hal/boards/ST_NUCLEO64_F091RC/board.h index b0cc99d53..d45fe70d7 100644 --- a/os/hal/boards/ST_NUCLEO64_F091RC/board.h +++ b/os/hal/boards/ST_NUCLEO64_F091RC/board.h @@ -85,9 +85,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -196,9 +194,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -240,11 +236,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 1).
* PA3 - ARD_D0 USART2_RX (alternate 1).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -257,11 +253,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -305,11 +301,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -357,7 +353,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -365,8 +361,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 1).
- * PB9 - ARD_D14 I2C1_SDA (alternate 1).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -374,7 +370,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -382,8 +378,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -422,7 +418,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -430,8 +426,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -462,8 +458,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 1) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 1) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -474,8 +470,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN11 (analog).
- * PC1 - ARD_A4 ADC1_IN10 (analog).
+ * PC0 - ARD_A5 ADC1_IN11 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN10 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -491,8 +487,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -539,8 +535,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F091RC/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F091RC/cfg/board.chcfg index 7239224b7..57fc41927 100644 --- a/os/hal/boards/ST_NUCLEO64_F091RC/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F091RC/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="1" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN10" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F103RB/board.h b/os/hal/boards/ST_NUCLEO64_F103RB/board.h index 4446fa678..117c9423e 100644 --- a/os/hal/boards/ST_NUCLEO64_F103RB/board.h +++ b/os/hal/boards/ST_NUCLEO64_F103RB/board.h @@ -85,9 +85,7 @@ #define GPIOB_ARD_D10 6U #define GPIOB_PIN7 7U #define GPIOB_ARD_D15 8U -#define GPIOB_I2C1_SCL 8U #define GPIOB_ARD_D14 9U -#define GPIOB_I2C1_SDA 9U #define GPIOB_ARD_D6 10U #define GPIOB_PIN11 11U #define GPIOB_PIN12 12U @@ -193,39 +191,31 @@ /* * Port A setup. * Everything input with pull-up except: - * PA0 - Analog input (GPIOA_ARD_A0, GPIOA_ADC1_IN0). - * PA1 - Analog input (GPIOA_ARD_A1, GPIOA_ADC1_IN1). * PA2 - Alternate output (GPIOA_ARD_D1, GPIOA_USART2_TX). * PA3 - Normal input (GPIOA_ARD_D0, GPIOA_USART2_RX). - * PA4 - Analog input (GPIOA_ARD_A2, GPIOA_ADC1_IN4). * PA5 - Push Pull output (GPIOA_LED_GREEN). * PA13 - Pull-up input (GPIOA_SWDIO). * PA14 - Pull-down input (GPIOA_SWCLK). */ -#define VAL_GPIOACRL 0x88304B00 /* PA7...PA0 */ +#define VAL_GPIOACRL 0x88384B88 /* PA7...PA0 */ #define VAL_GPIOACRH 0x88888888 /* PA15...PA8 */ #define VAL_GPIOAODR 0xFFFFBFDF /* * Port B setup. * Everything input with pull-up except: - * PB0 - Analog input (GPIOA_ARD_A3, GPIOB_ADC1_IN8). * PB3 - Pull-up input (GPIOA_SWO). - * PB8 - Alternate output (GPIOB_ARD_D15, GPIOB_I2C1_SCL). - * PB9 - Alternate output (GPIOB_ARD_D14, GPIOB_I2C1_SDA). */ -#define VAL_GPIOBCRL 0x88888880 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0x888888BB /* PB15...PB8 */ +#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ +#define VAL_GPIOBCRH 0x88888888 /* PB15...PB8 */ #define VAL_GPIOBODR 0xFFFFFFFF /* * Port C setup. * Everything input with pull-up except: - * PC0 - Analog input (GPIOA_ARD_A5, GPIOC_ADC1_IN11). - * PC1 - Analog input (GPIOA_ARD_A4, GPIOC_ADC1_IN10). * PC13 - Normal input (GPIOC_BUTTON). */ -#define VAL_GPIOCCRL 0x88888800 /* PC7...PC0 */ +#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ #define VAL_GPIOCCRH 0x88488888 /* PC15...PC8 */ #define VAL_GPIOCODR 0xFFFFFFFF diff --git a/os/hal/boards/ST_NUCLEO64_F302R8/board.h b/os/hal/boards/ST_NUCLEO64_F302R8/board.h index f3dbbc8f9..951ff005a 100644 --- a/os/hal/boards/ST_NUCLEO64_F302R8/board.h +++ b/os/hal/boards/ST_NUCLEO64_F302R8/board.h @@ -84,9 +84,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -228,9 +226,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_LED_GREEN PAL_LINE(GPIOB, 13U)
@@ -275,11 +271,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN1 (analog).
- * PA1 - ARD_A1 ADC1_IN2 (analog).
+ * PA0 - ARD_A0 ADC1_IN1 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN2 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ADC1_IN5 (analog).
+ * PA4 - ARD_A2 ADC1_IN5 (input pullup).
* PA5 - ARD_D13 (input pullup).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -292,11 +288,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_INPUT(GPIOA_ARD_D13) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -340,11 +336,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D13) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -392,7 +388,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN11 (analog).
+ * PB0 - ARD_A3 ADC1_IN11 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -400,8 +396,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -409,7 +405,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -417,8 +413,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -457,7 +453,7 @@ PIN_OSPEED_HIGH(GPIOB_LED_GREEN) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -465,8 +461,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -497,8 +493,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -509,8 +505,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN6 (analog).
- * PC1 - ARD_A4 ADC1_IN7 (analog).
+ * PC0 - ARD_A5 ADC1_IN6 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN7 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -526,8 +522,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -574,8 +570,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F302R8/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F302R8/cfg/board.chcfg index 59b7cc61b..17f7b10fb 100644 --- a/os/hal/boards/ST_NUCLEO64_F302R8/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F302R8/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN2" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN7" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F303RE/board.h b/os/hal/boards/ST_NUCLEO64_F303RE/board.h index a5809b488..79bbbd408 100644 --- a/os/hal/boards/ST_NUCLEO64_F303RE/board.h +++ b/os/hal/boards/ST_NUCLEO64_F303RE/board.h @@ -85,9 +85,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -230,9 +228,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -276,11 +272,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN1 (analog).
- * PA1 - ARD_A1 ADC1_IN2 (analog).
+ * PA0 - ARD_A0 ADC1_IN1 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN2 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ADC2_IN1 (analog).
+ * PA4 - ARD_A2 ADC2_IN1 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -293,11 +289,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -341,11 +337,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -393,7 +389,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC3_IN12 (analog).
+ * PB0 - ARD_A3 ADC3_IN12 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -401,8 +397,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -410,7 +406,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -418,8 +414,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -458,7 +454,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -466,8 +462,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -498,8 +494,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -510,8 +506,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC12_IN6 (analog).
- * PC1 - ARD_A4 ADC12_IN7 (analog).
+ * PC0 - ARD_A5 ADC12_IN6 (input pullup).
+ * PC1 - ARD_A4 ADC12_IN7 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -527,8 +523,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -575,8 +571,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F303RE/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F303RE/cfg/board.chcfg index 9dc65864b..6e56616bb 100644 --- a/os/hal/boards/ST_NUCLEO64_F303RE/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F303RE/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN2" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC12_IN7" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F334R8/board.h b/os/hal/boards/ST_NUCLEO64_F334R8/board.h index 7d8a95a9b..f954e67b2 100644 --- a/os/hal/boards/ST_NUCLEO64_F334R8/board.h +++ b/os/hal/boards/ST_NUCLEO64_F334R8/board.h @@ -18,7 +18,7 @@ #define _BOARD_H_
/*
- * Setup for STMicroelectronics NUCLEO64-F334R8 board.
+ * Setup for STMicroelectronics STM32 Nucleo64-F334R8 board.
*/
/*
@@ -52,12 +52,15 @@ * IO pins assignments.
*/
#define GPIOA_ARD_A0 0U
+#define GPIOA_ADC1_IN1 0U
#define GPIOA_ARD_A1 1U
+#define GPIOA_ADC1_IN2 1U
#define GPIOA_ARD_D1 2U
-#define GPIOA_USART_TX 2U
+#define GPIOA_USART2_TX 2U
#define GPIOA_ARD_D0 3U
-#define GPIOA_USART_RX 3U
+#define GPIOA_USART2_RX 3U
#define GPIOA_ARD_A2 4U
+#define GPIOA_ADC2_IN1 4U
#define GPIOA_LED_GREEN 5U
#define GPIOA_ARD_D13 5U
#define GPIOA_ARD_D12 6U
@@ -72,6 +75,7 @@ #define GPIOA_PIN15 15U
#define GPIOB_ARD_A3 0U
+#define GPIOB_ADC1_IN11 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_SWO 3U
@@ -81,9 +85,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_ARD_A5_ALT 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_ARD_A4_ALT 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -92,7 +94,9 @@ #define GPIOB_PIN15 15U
#define GPIOC_ARD_A5 0U
+#define GPIOC_ADC12_IN6 0U
#define GPIOC_ARD_A4 1U
+#define GPIOC_ADC12_IN7 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
@@ -105,8 +109,8 @@ #define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_BUTTON 13U
-#define GPIOC_PIN14 14U
-#define GPIOC_PIN15 15U
+#define GPIOC_OSC32_IN 14U
+#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
@@ -142,8 +146,8 @@ #define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
-#define GPIOF_PIN0 0U
-#define GPIOF_PIN1 1U
+#define GPIOF_OSC_IN 0U
+#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
@@ -197,12 +201,15 @@ * IO lines assignments.
*/
#define LINE_ARD_A0 PAL_LINE(GPIOA, 0U)
+#define LINE_ADC1_IN1 PAL_LINE(GPIOA, 0U)
#define LINE_ARD_A1 PAL_LINE(GPIOA, 1U)
+#define LINE_ADC1_IN2 PAL_LINE(GPIOA, 1U)
#define LINE_ARD_D1 PAL_LINE(GPIOA, 2U)
-#define LINE_USART_TX PAL_LINE(GPIOA, 2U)
+#define LINE_USART2_TX PAL_LINE(GPIOA, 2U)
#define LINE_ARD_D0 PAL_LINE(GPIOA, 3U)
-#define LINE_USART_RX PAL_LINE(GPIOA, 3U)
+#define LINE_USART2_RX PAL_LINE(GPIOA, 3U)
#define LINE_ARD_A2 PAL_LINE(GPIOA, 4U)
+#define LINE_ADC2_IN1 PAL_LINE(GPIOA, 4U)
#define LINE_LED_GREEN PAL_LINE(GPIOA, 5U)
#define LINE_ARD_D13 PAL_LINE(GPIOA, 5U)
#define LINE_ARD_D12 PAL_LINE(GPIOA, 6U)
@@ -214,24 +221,29 @@ #define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_ARD_A3 PAL_LINE(GPIOB, 0U)
+#define LINE_ADC1_IN11 PAL_LINE(GPIOB, 0U)
#define LINE_SWO PAL_LINE(GPIOB, 3U)
#define LINE_ARD_D3 PAL_LINE(GPIOB, 3U)
#define LINE_ARD_D5 PAL_LINE(GPIOB, 4U)
#define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_ARD_A5_ALT PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_ARD_A4_ALT PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
+#define LINE_ADC12_IN6 PAL_LINE(GPIOC, 0U)
#define LINE_ARD_A4 PAL_LINE(GPIOC, 1U)
+#define LINE_ADC12_IN7 PAL_LINE(GPIOC, 1U)
#define LINE_ARD_D9 PAL_LINE(GPIOC, 7U)
#define LINE_BUTTON PAL_LINE(GPIOC, 13U)
+#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
+#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
+#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
+#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
@@ -260,11 +272,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 (analog).
- * PA1 - ARD_A1 (analog).
- * PA2 - ARD_D1 USART_TX (alternate 7).
- * PA3 - ARD_D0 USART_RX (alternate 7).
- * PA4 - ARD_A2 (analog).
+ * PA0 - ARD_A0 ADC1_IN1 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN2 (input pullup).
+ * PA2 - ARD_D1 USART2_TX (alternate 7).
+ * PA3 - ARD_D0 USART2_RX (alternate 7).
+ * PA4 - ARD_A2 ADC2_IN1 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -277,11 +289,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -325,11 +337,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -377,7 +389,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 (analog).
+ * PB0 - ARD_A3 ADC1_IN11 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -385,8 +397,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 ARD_A5_ALT (input pullup).
- * PB9 - ARD_D14 ARD_A4_ALT (input pullup).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -394,7 +406,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -442,7 +454,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -494,8 +506,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 (analog).
- * PC1 - ARD_A4 (analog).
+ * PC0 - ARD_A5 ADC12_IN6 (input pullup).
+ * PC1 - ARD_A4 ADC12_IN7 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -508,11 +520,11 @@ * PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - BUTTON (input floating).
- * PC14 - PIN14 (input pullup).
- * PC15 - PIN15 (input pullup).
+ * PC14 - OSC32_IN (input floating).
+ * PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -525,8 +537,8 @@ PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_BUTTON) | \
- PIN_MODE_INPUT(GPIOC_PIN14) | \
- PIN_MODE_INPUT(GPIOC_PIN15))
+ PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
+ PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_ARD_A5) | \
PIN_OTYPE_PUSHPULL(GPIOC_ARD_A4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
@@ -541,8 +553,8 @@ PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_BUTTON) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \
- PIN_OTYPE_PUSHPULL(GPIOC_PIN15))
+ PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
+ PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_ARD_A5) | \
PIN_OSPEED_HIGH(GPIOC_ARD_A4) | \
PIN_OSPEED_HIGH(GPIOC_PIN2) | \
@@ -557,10 +569,10 @@ PIN_OSPEED_HIGH(GPIOC_PIN11) | \
PIN_OSPEED_HIGH(GPIOC_PIN12) | \
PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
- PIN_OSPEED_HIGH(GPIOC_PIN14) | \
- PIN_OSPEED_HIGH(GPIOC_PIN15))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+ PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
+ PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
@@ -573,8 +585,8 @@ PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_FLOATING(GPIOC_BUTTON) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN14) | \
- PIN_PUPDR_PULLUP(GPIOC_PIN15))
+ PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
+ PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_ARD_A5) | \
PIN_ODR_HIGH(GPIOC_ARD_A4) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
@@ -589,8 +601,8 @@ PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_BUTTON) | \
- PIN_ODR_HIGH(GPIOC_PIN14) | \
- PIN_ODR_HIGH(GPIOC_PIN15))
+ PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
+ PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_ARD_A5, 0) | \
PIN_AFIO_AF(GPIOC_ARD_A4, 0) | \
PIN_AFIO_AF(GPIOC_PIN2, 0) | \
@@ -605,8 +617,8 @@ PIN_AFIO_AF(GPIOC_PIN11, 0) | \
PIN_AFIO_AF(GPIOC_PIN12, 0) | \
PIN_AFIO_AF(GPIOC_BUTTON, 0) | \
- PIN_AFIO_AF(GPIOC_PIN14, 0) | \
- PIN_AFIO_AF(GPIOC_PIN15, 0))
+ PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
+ PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
/*
* GPIOD setup:
@@ -845,8 +857,8 @@ /*
* GPIOF setup:
*
- * PF0 - PIN0 (input pullup).
- * PF1 - PIN1 (input pullup).
+ * PF0 - OSC_IN (input floating).
+ * PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
@@ -862,8 +874,8 @@ * PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
-#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \
- PIN_MODE_INPUT(GPIOF_PIN1) | \
+#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
+ PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
@@ -878,8 +890,8 @@ PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
-#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \
- PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \
+#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
+ PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
@@ -894,8 +906,8 @@ PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
-#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | \
- PIN_OSPEED_HIGH(GPIOF_PIN1) | \
+#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_OSC_IN) | \
+ PIN_OSPEED_HIGH(GPIOF_OSC_OUT) | \
PIN_OSPEED_HIGH(GPIOF_PIN2) | \
PIN_OSPEED_HIGH(GPIOF_PIN3) | \
PIN_OSPEED_HIGH(GPIOF_PIN4) | \
@@ -910,8 +922,8 @@ PIN_OSPEED_HIGH(GPIOF_PIN13) | \
PIN_OSPEED_HIGH(GPIOF_PIN14) | \
PIN_OSPEED_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \
- PIN_PUPDR_PULLUP(GPIOF_PIN1) | \
+#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
+ PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
@@ -926,8 +938,8 @@ PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
-#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \
- PIN_ODR_HIGH(GPIOF_PIN1) | \
+#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
+ PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
@@ -942,8 +954,8 @@ PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
-#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0) | \
- PIN_AFIO_AF(GPIOF_PIN1, 0) | \
+#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0) | \
+ PIN_AFIO_AF(GPIOF_OSC_OUT, 0) | \
PIN_AFIO_AF(GPIOF_PIN2, 0) | \
PIN_AFIO_AF(GPIOF_PIN3, 0) | \
PIN_AFIO_AF(GPIOF_PIN4, 0) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F334R8/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F334R8/cfg/board.chcfg index 224cadb40..917d1df48 100644 --- a/os/hal/boards/ST_NUCLEO64_F334R8/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F334R8/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN2" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC12_IN7" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F401RE/board.h b/os/hal/boards/ST_NUCLEO64_F401RE/board.h index e25e1c6bd..7923ee2db 100644 --- a/os/hal/boards/ST_NUCLEO64_F401RE/board.h +++ b/os/hal/boards/ST_NUCLEO64_F401RE/board.h @@ -89,9 +89,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -253,9 +251,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -300,11 +296,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -317,11 +313,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -365,11 +361,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -417,7 +413,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -425,8 +421,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -434,7 +430,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -442,8 +438,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -482,7 +478,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -490,8 +486,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -522,8 +518,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -534,8 +530,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN10 (analog).
- * PC1 - ARD_A4 ADC1_IN11 (analog).
+ * PC0 - ARD_A5 ADC1_IN10 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN11 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -551,8 +547,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -599,8 +595,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F401RE/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F401RE/cfg/board.chcfg index 4cb54abe9..033ed8b07 100644 --- a/os/hal/boards/ST_NUCLEO64_F401RE/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F401RE/cfg/board.chcfg @@ -25,16 +25,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -57,8 +57,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -155,8 +155,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -215,21 +215,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -285,16 +285,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F410RB/board.h b/os/hal/boards/ST_NUCLEO64_F410RB/board.h index 7d9c98a9e..e2b6d9339 100644 --- a/os/hal/boards/ST_NUCLEO64_F410RB/board.h +++ b/os/hal/boards/ST_NUCLEO64_F410RB/board.h @@ -89,9 +89,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -253,9 +251,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -300,11 +296,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -317,11 +313,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -365,11 +361,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -417,7 +413,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -425,8 +421,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -434,7 +430,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -442,8 +438,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -482,7 +478,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -490,8 +486,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -522,8 +518,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -534,8 +530,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN10 (analog).
- * PC1 - ARD_A4 ADC1_IN11 (analog).
+ * PC0 - ARD_A5 ADC1_IN10 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN11 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -551,8 +547,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -599,8 +595,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F410RB/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F410RB/cfg/board.chcfg index bc762d078..b03a7f774 100644 --- a/os/hal/boards/ST_NUCLEO64_F410RB/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F410RB/cfg/board.chcfg @@ -25,16 +25,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -57,8 +57,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -155,8 +155,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -215,21 +215,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -285,16 +285,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F411RE/board.h b/os/hal/boards/ST_NUCLEO64_F411RE/board.h index 638b906e9..8cc39c537 100644 --- a/os/hal/boards/ST_NUCLEO64_F411RE/board.h +++ b/os/hal/boards/ST_NUCLEO64_F411RE/board.h @@ -89,9 +89,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -253,9 +251,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -300,11 +296,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC1_IN0 (analog).
- * PA1 - ARD_A1 ADC1_IN1 (analog).
+ * PA0 - ARD_A0 ADC1_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ADC1_IN4 (analog).
+ * PA4 - ARD_A2 ADC1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -317,11 +313,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -365,11 +361,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -417,7 +413,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC1_IN8 (analog).
+ * PB0 - ARD_A3 ADC1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -425,8 +421,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -434,7 +430,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -442,8 +438,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -482,7 +478,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -490,8 +486,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -522,8 +518,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -534,8 +530,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC1_IN10 (analog).
- * PC1 - ARD_A4 ADC1_IN11 (analog).
+ * PC0 - ARD_A5 ADC1_IN10 (input pullup).
+ * PC1 - ARD_A4 ADC1_IN11 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -551,8 +547,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -599,8 +595,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F411RE/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F411RE/cfg/board.chcfg index eb4abe3a2..96acefc03 100644 --- a/os/hal/boards/ST_NUCLEO64_F411RE/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F411RE/cfg/board.chcfg @@ -25,16 +25,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -57,8 +57,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -155,8 +155,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -215,21 +215,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -285,16 +285,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC1_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_F446RE/board.h b/os/hal/boards/ST_NUCLEO64_F446RE/board.h index 629204f49..dca5c8fae 100644 --- a/os/hal/boards/ST_NUCLEO64_F446RE/board.h +++ b/os/hal/boards/ST_NUCLEO64_F446RE/board.h @@ -89,9 +89,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -253,9 +251,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -300,11 +296,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ADC123_IN0 (analog).
- * PA1 - ARD_A1 ADC123_IN0 (analog).
+ * PA0 - ARD_A0 ADC123_IN0 (input pullup).
+ * PA1 - ARD_A1 ADC123_IN0 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ADC12_IN4 (analog).
+ * PA4 - ARD_A2 ADC12_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -317,11 +313,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -365,11 +361,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -417,7 +413,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ADC12_IN8 (analog).
+ * PB0 - ARD_A3 ADC12_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -425,8 +421,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -434,7 +430,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -442,8 +438,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -482,7 +478,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -490,8 +486,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -522,8 +518,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -534,8 +530,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ADC123_IN10 (analog).
- * PC1 - ARD_A4 ADC123_IN11 (analog).
+ * PC0 - ARD_A5 ADC123_IN10 (input pullup).
+ * PC1 - ARD_A4 ADC123_IN11 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -551,8 +547,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -599,8 +595,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_F446RE/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_F446RE/cfg/board.chcfg index f2d385096..5a91c9c15 100644 --- a/os/hal/boards/ST_NUCLEO64_F446RE/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_F446RE/cfg/board.chcfg @@ -25,16 +25,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ADC123_IN0" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -57,8 +57,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -155,8 +155,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -215,21 +215,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -285,16 +285,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ADC123_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_L053R8/board.h b/os/hal/boards/ST_NUCLEO64_L053R8/board.h index 3b67109b1..600ff9f10 100644 --- a/os/hal/boards/ST_NUCLEO64_L053R8/board.h +++ b/os/hal/boards/ST_NUCLEO64_L053R8/board.h @@ -84,9 +84,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -178,9 +176,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -221,11 +217,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ACD1_IN0 (analog).
- * PA1 - ARD_A1 ACD1_IN1 (analog).
+ * PA0 - ARD_A0 ACD1_IN0 (input pullup).
+ * PA1 - ARD_A1 ACD1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 4).
* PA3 - ARD_D0 USART2_RX (alternate 4).
- * PA4 - ARD_A2 ACD1_IN4 (analog).
+ * PA4 - ARD_A2 ACD1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull maximum).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -238,11 +234,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -286,11 +282,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -338,7 +334,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ACD1_IN8 (analog).
+ * PB0 - ARD_A3 ACD1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -346,8 +342,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -355,7 +351,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -363,8 +359,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -403,7 +399,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -411,8 +407,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -443,8 +439,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
@@ -455,8 +451,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ACD1_IN10 (analog).
- * PC1 - ARD_A4 ACD1_IN11 (analog).
+ * PC0 - ARD_A5 ACD1_IN10 (input pullup).
+ * PC1 - ARD_A4 ACD1_IN11 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -472,8 +468,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -520,8 +516,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_L053R8/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_L053R8/cfg/board.chcfg index ae4b74e04..bc8cba31a 100644 --- a/os/hal/boards/ST_NUCLEO64_L053R8/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_L053R8/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ACD1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ACD1_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_L073RZ/board.h b/os/hal/boards/ST_NUCLEO64_L073RZ/board.h index 0124a0e46..ddd674d2a 100644 --- a/os/hal/boards/ST_NUCLEO64_L073RZ/board.h +++ b/os/hal/boards/ST_NUCLEO64_L073RZ/board.h @@ -84,9 +84,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -195,9 +193,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -364,8 +360,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -381,8 +377,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -429,8 +425,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -461,8 +457,8 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
diff --git a/os/hal/boards/ST_NUCLEO64_L073RZ/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_L073RZ/cfg/board.chcfg index 66b9c11d3..4803c1c12 100644 --- a/os/hal/boards/ST_NUCLEO64_L073RZ/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_L073RZ/cfg/board.chcfg @@ -21,16 +21,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ACD1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -53,8 +53,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -151,8 +151,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -211,21 +211,21 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" - Alternate="4" /> + Resistor="PullUp" + Mode="Input" + Alternate="0" /> <pin10 ID="ARD_D6" Type="PushPull" @@ -281,16 +281,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ACD1_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_L152RE/board.h b/os/hal/boards/ST_NUCLEO64_L152RE/board.h index 1ad3defdc..ecdee7dd8 100644 --- a/os/hal/boards/ST_NUCLEO64_L152RE/board.h +++ b/os/hal/boards/ST_NUCLEO64_L152RE/board.h @@ -82,9 +82,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -227,9 +225,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
@@ -273,11 +269,11 @@ /*
* GPIOA setup:
*
- * PA0 - ARD_A0 ACD1_IN0 (analog).
- * PA1 - ARD_A1 ACD1_IN1 (analog).
+ * PA0 - ARD_A0 ACD1_IN0 (input pullup).
+ * PA1 - ARD_A1 ACD1_IN1 (input pullup).
* PA2 - ARD_D1 USART2_TX (alternate 7).
* PA3 - ARD_D0 USART2_RX (alternate 7).
- * PA4 - ARD_A2 ACD1_IN4 (analog).
+ * PA4 - ARD_A2 ACD1_IN4 (input pullup).
* PA5 - LED_GREEN ARD_D13 (output pushpull high).
* PA6 - ARD_D12 (input pullup).
* PA7 - ARD_D11 (input pullup).
@@ -290,11 +286,11 @@ * PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
-#define VAL_GPIOA_MODER (PIN_MODE_ANALOG(GPIOA_ARD_A0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_ARD_A0) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D1) | \
PIN_MODE_ALTERNATE(GPIOA_ARD_D0) | \
- PIN_MODE_ANALOG(GPIOA_ARD_A2) | \
+ PIN_MODE_INPUT(GPIOA_ARD_A2) | \
PIN_MODE_OUTPUT(GPIOA_LED_GREEN) | \
PIN_MODE_INPUT(GPIOA_ARD_D12) | \
PIN_MODE_INPUT(GPIOA_ARD_D11) | \
@@ -338,11 +334,11 @@ PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
-#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_ARD_A0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_ARD_A0) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D1) | \
PIN_PUPDR_FLOATING(GPIOA_ARD_D0) | \
- PIN_PUPDR_FLOATING(GPIOA_ARD_A2) | \
+ PIN_PUPDR_PULLUP(GPIOA_ARD_A2) | \
PIN_PUPDR_FLOATING(GPIOA_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D12) | \
PIN_PUPDR_PULLUP(GPIOA_ARD_D11) | \
@@ -390,7 +386,7 @@ /*
* GPIOB setup:
*
- * PB0 - ARD_A3 ACD1_IN8 (analog).
+ * PB0 - ARD_A3 ACD1_IN8 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - SWO ARD_D3 (alternate 0).
@@ -398,8 +394,8 @@ * PB5 - ARD_D4 (input pullup).
* PB6 - ARD_D10 (input pullup).
* PB7 - PIN7 (input pullup).
- * PB8 - ARD_D15 I2C1_SCL (alternate 0).
- * PB9 - ARD_D14 I2C1_SDA (alternate 0).
+ * PB8 - ARD_D15 (input pullup).
+ * PB9 - ARD_D14 (input pullup).
* PB10 - ARD_D6 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
@@ -407,7 +403,7 @@ * PB14 - PIN14 (input pullup).
* PB15 - PIN15 (input pullup).
*/
-#define VAL_GPIOB_MODER (PIN_MODE_ANALOG(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_ARD_A3) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_ALTERNATE(GPIOB_SWO) | \
@@ -415,8 +411,8 @@ PIN_MODE_INPUT(GPIOB_ARD_D4) | \
PIN_MODE_INPUT(GPIOB_ARD_D10) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D15) | \
+ PIN_MODE_INPUT(GPIOB_ARD_D14) | \
PIN_MODE_INPUT(GPIOB_ARD_D6) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
@@ -455,7 +451,7 @@ PIN_OSPEED_HIGH(GPIOB_PIN13) | \
PIN_OSPEED_HIGH(GPIOB_PIN14) | \
PIN_OSPEED_HIGH(GPIOB_PIN15))
-#define VAL_GPIOB_PUPDR (PIN_PUPDR_FLOATING(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_ARD_A3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_SWO) | \
@@ -463,8 +459,8 @@ PIN_PUPDR_PULLUP(GPIOB_ARD_D4) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D15) | \
- PIN_PUPDR_FLOATING(GPIOB_ARD_D14) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D15) | \
+ PIN_PUPDR_PULLUP(GPIOB_ARD_D14) | \
PIN_PUPDR_PULLUP(GPIOB_ARD_D6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
@@ -507,8 +503,8 @@ /*
* GPIOC setup:
*
- * PC0 - ARD_A5 ACD1_IN10 (analog).
- * PC1 - ARD_A4 ACD1_IN11 (analog).
+ * PC0 - ARD_A5 ACD1_IN10 (input pullup).
+ * PC1 - ARD_A4 ACD1_IN11 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
@@ -524,8 +520,8 @@ * PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
-#define VAL_GPIOC_MODER (PIN_MODE_ANALOG(GPIOC_ARD_A5) | \
- PIN_MODE_ANALOG(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_ARD_A5) | \
+ PIN_MODE_INPUT(GPIOC_ARD_A4) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
@@ -572,8 +568,8 @@ PIN_OSPEED_HIGH(GPIOC_BUTTON) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
-#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_ARD_A5) | \
- PIN_PUPDR_FLOATING(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_ARD_A5) | \
+ PIN_PUPDR_PULLUP(GPIOC_ARD_A4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_L152RE/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_L152RE/cfg/board.chcfg index fa8aef40e..6bd168366 100644 --- a/os/hal/boards/ST_NUCLEO64_L152RE/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_L152RE/cfg/board.chcfg @@ -25,16 +25,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A1 ACD1_IN1" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="ARD_D1 USART2_TX" @@ -57,8 +57,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin5 ID="LED_GREEN ARD_D13" @@ -155,8 +155,8 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="" @@ -215,20 +215,20 @@ Mode="Input" Alternate="0" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Alternate" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin10 ID="ARD_D6" @@ -285,16 +285,16 @@ Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin1 ID="ARD_A4 ACD1_IN11" Type="PushPull" Level="High" Speed="Maximum" - Resistor="Floating" - Mode="Analog" + Resistor="PullUp" + Mode="Input" Alternate="0" /> <pin2 ID="" diff --git a/os/hal/boards/ST_NUCLEO64_L476RG/board.h b/os/hal/boards/ST_NUCLEO64_L476RG/board.h index c08c7e07b..f4e7c6510 100644 --- a/os/hal/boards/ST_NUCLEO64_L476RG/board.h +++ b/os/hal/boards/ST_NUCLEO64_L476RG/board.h @@ -90,9 +90,7 @@ #define GPIOB_ARD_D10 6U
#define GPIOB_PIN7 7U
#define GPIOB_ARD_D15 8U
-#define GPIOB_I2C1_SCL 8U
#define GPIOB_ARD_D14 9U
-#define GPIOB_I2C1_SDA 9U
#define GPIOB_ARD_D6 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
@@ -234,9 +232,7 @@ #define LINE_ARD_D4 PAL_LINE(GPIOB, 5U)
#define LINE_ARD_D10 PAL_LINE(GPIOB, 6U)
#define LINE_ARD_D15 PAL_LINE(GPIOB, 8U)
-#define LINE_I2C1_SCL PAL_LINE(GPIOB, 8U)
#define LINE_ARD_D14 PAL_LINE(GPIOB, 9U)
-#define LINE_I2C1_SDA PAL_LINE(GPIOB, 9U)
#define LINE_ARD_D6 PAL_LINE(GPIOB, 10U)
#define LINE_ARD_A5 PAL_LINE(GPIOC, 0U)
#define LINE_ACD123_IN1 PAL_LINE(GPIOC, 0U)
@@ -391,11 +387,11 @@ PIN_AFIO_AF(GPIOA_SWDIO, 0) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0) | \
PIN_AFIO_AF(GPIOA_PIN15, 0))
-#define VAL_GPIOA_ASCR (PIN_ASCR_ENABLED(GPIOA_ARD_A0) | \
- PIN_ASCR_ENABLED(GPIOA_ARD_A1) | \
+#define VAL_GPIOA_ASCR (PIN_ASCR_DISABLED(GPIOA_ARD_A0) | \
+ PIN_ASCR_DISABLED(GPIOA_ARD_A1) | \
PIN_ASCR_DISABLED(GPIOA_ARD_D1) | \
PIN_ASCR_DISABLED(GPIOA_ARD_D0) | \
- PIN_ASCR_ENABLED(GPIOA_ARD_A2) | \
+ PIN_ASCR_DISABLED(GPIOA_ARD_A2) | \
PIN_ASCR_DISABLED(GPIOA_ARD_D13) | \
PIN_ASCR_DISABLED(GPIOA_ARD_D12) | \
PIN_ASCR_DISABLED(GPIOA_ARD_D11) | \
@@ -435,8 +431,8 @@ * PB5 - ARD_D4 (analog).
* PB6 - ARD_D10 (analog).
* PB7 - PIN7 (analog).
- * PB8 - ARD_D15 I2C1_SCL (alternate 4).
- * PB9 - ARD_D14 I2C1_SDA (alternate 4).
+ * PB8 - ARD_D15 (analog).
+ * PB9 - ARD_D14 (analog).
* PB10 - ARD_D6 (analog).
* PB11 - PIN11 (analog).
* PB12 - PIN12 (analog).
@@ -452,8 +448,8 @@ PIN_MODE_ANALOG(GPIOB_ARD_D4) | \
PIN_MODE_ANALOG(GPIOB_ARD_D10) | \
PIN_MODE_ANALOG(GPIOB_PIN7) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D15) | \
- PIN_MODE_ALTERNATE(GPIOB_ARD_D14) | \
+ PIN_MODE_ANALOG(GPIOB_ARD_D15) | \
+ PIN_MODE_ANALOG(GPIOB_ARD_D14) | \
PIN_MODE_ANALOG(GPIOB_ARD_D6) | \
PIN_MODE_ANALOG(GPIOB_PIN11) | \
PIN_MODE_ANALOG(GPIOB_PIN12) | \
@@ -532,15 +528,15 @@ PIN_AFIO_AF(GPIOB_ARD_D4, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D10, 0) | \
PIN_AFIO_AF(GPIOB_PIN7, 0))
-#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 4) | \
- PIN_AFIO_AF(GPIOB_ARD_D14, 4) | \
+#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_ARD_D15, 0) | \
+ PIN_AFIO_AF(GPIOB_ARD_D14, 0) | \
PIN_AFIO_AF(GPIOB_ARD_D6, 0) | \
PIN_AFIO_AF(GPIOB_PIN11, 0) | \
PIN_AFIO_AF(GPIOB_PIN12, 0) | \
PIN_AFIO_AF(GPIOB_PIN13, 0) | \
PIN_AFIO_AF(GPIOB_PIN14, 0) | \
PIN_AFIO_AF(GPIOB_PIN15, 0))
-#define VAL_GPIOB_ASCR (PIN_ASCR_ENABLED(GPIOB_ARD_A3) | \
+#define VAL_GPIOB_ASCR (PIN_ASCR_DISABLED(GPIOB_ARD_A3) | \
PIN_ASCR_DISABLED(GPIOB_PIN1) | \
PIN_ASCR_DISABLED(GPIOB_PIN2) | \
PIN_ASCR_DISABLED(GPIOB_ARD_D3) | \
@@ -689,8 +685,8 @@ PIN_AFIO_AF(GPIOC_BUTTON, 0) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0))
-#define VAL_GPIOC_ASCR (PIN_ASCR_ENABLED(GPIOC_ARD_A5) | \
- PIN_ASCR_ENABLED(GPIOC_ARD_A4) | \
+#define VAL_GPIOC_ASCR (PIN_ASCR_DISABLED(GPIOC_ARD_A5) | \
+ PIN_ASCR_DISABLED(GPIOC_ARD_A4) | \
PIN_ASCR_DISABLED(GPIOC_PIN2) | \
PIN_ASCR_DISABLED(GPIOC_PIN3) | \
PIN_ASCR_DISABLED(GPIOC_PIN4) | \
diff --git a/os/hal/boards/ST_NUCLEO64_L476RG/cfg/board.chcfg b/os/hal/boards/ST_NUCLEO64_L476RG/cfg/board.chcfg index 75cd276ab..012744102 100644 --- a/os/hal/boards/ST_NUCLEO64_L476RG/cfg/board.chcfg +++ b/os/hal/boards/ST_NUCLEO64_L476RG/cfg/board.chcfg @@ -29,7 +29,7 @@ Resistor="Floating" Mode="Analog" Alternate="0" - AnalogSwitch="Enabled" + AnalogSwitch="Disabled" PinLock="Disabled" /> <pin1 ID="ARD_A1 ACD12_IN6" @@ -39,7 +39,7 @@ Resistor="Floating" Mode="Analog" Alternate="0" - AnalogSwitch="Enabled" + AnalogSwitch="Disabled" PinLock="Disabled" /> <pin2 ID="ARD_D1 USART2_TX" @@ -69,7 +69,7 @@ Resistor="Floating" Mode="Analog" Alternate="0" - AnalogSwitch="Enabled" + AnalogSwitch="Disabled" PinLock="Disabled" /> <pin5 ID="ARD_D13 LED_GREEN" @@ -191,7 +191,7 @@ Resistor="Floating" Mode="Analog" Alternate="0" - AnalogSwitch="Enabled" + AnalogSwitch="Disabled" PinLock="Disabled" /> <pin1 ID="" @@ -264,23 +264,23 @@ AnalogSwitch="Disabled" PinLock="Disabled" /> <pin8 - ID="ARD_D15 I2C1_SCL" + ID="ARD_D15" Type="PushPull" Level="High" Speed="Maximum" Resistor="Floating" - Mode="Alternate" - Alternate="4" + Mode="Analog" + Alternate="0" AnalogSwitch="Disabled" PinLock="Disabled" /> <pin9 - ID="ARD_D14 I2C1_SDA" + ID="ARD_D14" Type="PushPull" Level="High" Speed="Maximum" Resistor="Floating" - Mode="Alternate" - Alternate="4" + Mode="Analog" + Alternate="0" AnalogSwitch="Disabled" PinLock="Disabled" /> <pin10 @@ -353,7 +353,7 @@ Resistor="Floating" Mode="Analog" Alternate="0" - AnalogSwitch="Enabled" + AnalogSwitch="Disabled" PinLock="Disabled" /> <pin1 ID="ARD_A4 ACD123_IN2" @@ -363,7 +363,7 @@ Resistor="Floating" Mode="Analog" Alternate="0" - AnalogSwitch="Enabled" + AnalogSwitch="Disabled" PinLock="Disabled" /> <pin2 ID="" |