diff options
Diffstat (limited to 'os/hal/ports/STM32/LLD/USARTv2/serial_lld.h')
-rw-r--r-- | os/hal/ports/STM32/LLD/USARTv2/serial_lld.h | 305 |
1 files changed, 305 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/USARTv2/serial_lld.h b/os/hal/ports/STM32/LLD/USARTv2/serial_lld.h new file mode 100644 index 000000000..ac7415895 --- /dev/null +++ b/os/hal/ports/STM32/LLD/USARTv2/serial_lld.h @@ -0,0 +1,305 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+/**
+ * @file STM32/USARTv2/serial_lld.h
+ * @brief STM32 low level serial driver header.
+ *
+ * @addtogroup SERIAL
+ * @{
+ */
+
+#ifndef _SERIAL_LLD_H_
+#define _SERIAL_LLD_H_
+
+#if HAL_USE_SERIAL || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief USART1 driver enable switch.
+ * @details If set to @p TRUE the support for USART1 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART1) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART1 FALSE
+#endif
+
+/**
+ * @brief USART2 driver enable switch.
+ * @details If set to @p TRUE the support for USART2 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART2) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART2 FALSE
+#endif
+
+/**
+ * @brief USART3 driver enable switch.
+ * @details If set to @p TRUE the support for USART3 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART3) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART3 FALSE
+#endif
+
+/**
+ * @brief UART4 driver enable switch.
+ * @details If set to @p TRUE the support for UART4 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART4) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART4 FALSE
+#endif
+
+/**
+ * @brief UART5 driver enable switch.
+ * @details If set to @p TRUE the support for UART5 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_UART5) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_UART5 FALSE
+#endif
+
+/**
+ * @brief USART6 driver enable switch.
+ * @details If set to @p TRUE the support for USART6 is included.
+ * @note The default is @p TRUE.
+ */
+#if !defined(STM32_SERIAL_USE_USART6) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USE_USART6 FALSE
+#endif
+
+/**
+ * @brief USART1 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART1_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART1_PRIORITY 12
+#endif
+
+/**
+ * @brief USART2 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART2_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART2_PRIORITY 12
+#endif
+
+/**
+ * @brief USART3 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART3_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART3_PRIORITY 12
+#endif
+
+/**
+ * @brief UART4 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART4_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART4_PRIORITY 12
+#endif
+
+/**
+ * @brief UART5 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_UART5_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_UART5_PRIORITY 12
+#endif
+
+/**
+ * @brief USART6 interrupt priority level setting.
+ */
+#if !defined(STM32_SERIAL_USART6_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_SERIAL_USART6_PRIORITY 12
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !STM32_HAS_USART1
+#error "USART1 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && !STM32_HAS_USART2
+#error "USART2 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && !STM32_HAS_USART3
+#error "USART3 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && !STM32_HAS_UART4
+#error "UART4 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && !STM32_HAS_UART5
+#error "UART5 not present in the selected device"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && !STM32_HAS_USART6
+#error "USART6 not present in the selected device"
+#endif
+
+#if !STM32_SERIAL_USE_USART1 && !STM32_SERIAL_USE_USART2 && \
+ !STM32_SERIAL_USE_USART3 && !STM32_SERIAL_USE_UART4 && \
+ !STM32_SERIAL_USE_UART5 && !STM32_SERIAL_USE_USART6
+#error "SERIAL driver activated but no USART/UART peripheral assigned"
+#endif
+
+#if STM32_SERIAL_USE_USART1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART1_PRIORITY)
+#error "Invalid IRQ priority assigned to USART1"
+#endif
+
+#if STM32_SERIAL_USE_USART2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART2_PRIORITY)
+#error "Invalid IRQ priority assigned to USART2"
+#endif
+
+#if STM32_SERIAL_USE_USART3 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART3_PRIORITY)
+#error "Invalid IRQ priority assigned to USART3"
+#endif
+
+#if STM32_SERIAL_USE_UART4 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART4_PRIORITY)
+#error "Invalid IRQ priority assigned to UART4"
+#endif
+
+#if STM32_SERIAL_USE_UART5 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_UART5_PRIORITY)
+#error "Invalid IRQ priority assigned to UART5"
+#endif
+
+#if STM32_SERIAL_USE_USART6 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_SERIAL_USART6_PRIORITY)
+#error "Invalid IRQ priority assigned to USART6"
+#endif
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief STM32 Serial Driver configuration structure.
+ * @details An instance of this structure must be passed to @p sdStart()
+ * in order to configure and start a serial driver operations.
+ * @note This structure content is architecture dependent, each driver
+ * implementation defines its own version and the custom static
+ * initializers.
+ */
+typedef struct {
+ /**
+ * @brief Bit rate.
+ */
+ uint32_t speed;
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Initialization value for the CR1 register.
+ */
+ uint32_t cr1;
+ /**
+ * @brief Initialization value for the CR2 register.
+ */
+ uint32_t cr2;
+ /**
+ * @brief Initialization value for the CR3 register.
+ */
+ uint32_t cr3;
+} SerialConfig;
+
+/**
+ * @brief @p SerialDriver specific data.
+ */
+#define _serial_driver_data \
+ _base_asynchronous_channel_data \
+ /* Driver state.*/ \
+ sdstate_t state; \
+ /* Input queue.*/ \
+ input_queue_t iqueue; \
+ /* Output queue.*/ \
+ output_queue_t oqueue; \
+ /* Input circular buffer.*/ \
+ uint8_t ib[SERIAL_BUFFERS_SIZE]; \
+ /* Output circular buffer.*/ \
+ uint8_t ob[SERIAL_BUFFERS_SIZE]; \
+ /* End of the mandatory fields.*/ \
+ /* Pointer to the USART registers block.*/ \
+ USART_TypeDef *usart; \
+ /* Clock frequency for the associated USART/UART.*/ \
+ uint32_t clock;
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/*
+ * Extra USARTs definitions here (missing from the ST header file).
+ */
+#define USART_CR2_STOP1_BITS (0 << 12) /**< @brief CR2 1 stop bit value.*/
+#define USART_CR2_STOP0P5_BITS (1 << 12) /**< @brief CR2 0.5 stop bit value.*/
+#define USART_CR2_STOP2_BITS (2 << 12) /**< @brief CR2 2 stop bit value.*/
+#define USART_CR2_STOP1P5_BITS (3 << 12) /**< @brief CR2 1.5 stop bit value.*/
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if STM32_SERIAL_USE_USART1 && !defined(__DOXYGEN__)
+extern SerialDriver SD1;
+#endif
+#if STM32_SERIAL_USE_USART2 && !defined(__DOXYGEN__)
+extern SerialDriver SD2;
+#endif
+#if STM32_SERIAL_USE_USART3 && !defined(__DOXYGEN__)
+extern SerialDriver SD3;
+#endif
+#if STM32_SERIAL_USE_UART4 && !defined(__DOXYGEN__)
+extern SerialDriver SD4;
+#endif
+#if STM32_SERIAL_USE_UART5 && !defined(__DOXYGEN__)
+extern SerialDriver SD5;
+#endif
+#if STM32_SERIAL_USE_USART6 && !defined(__DOXYGEN__)
+extern SerialDriver SD6;
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void sd_lld_init(void);
+ void sd_lld_start(SerialDriver *sdp, const SerialConfig *config);
+ void sd_lld_stop(SerialDriver *sdp);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_SERIAL */
+
+#endif /* _SERIAL_LLD_H_ */
+
+/** @} */
|