diff options
Diffstat (limited to 'os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h')
-rw-r--r-- | os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h | 357 |
1 files changed, 357 insertions, 0 deletions
diff --git a/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h b/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h new file mode 100644 index 000000000..070b2edad --- /dev/null +++ b/os/hal/ports/STM32/LLD/I2Cv2/i2c_lld.h @@ -0,0 +1,357 @@ +/*
+ ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+/*
+ Concepts and parts of this file have been contributed by Uladzimir Pylinsky
+ aka barthess.
+ */
+
+/**
+ * @file STM32/I2Cv2/i2c_lld.h
+ * @brief STM32 I2C subsystem low level driver header.
+ *
+ * @addtogroup I2C
+ * @{
+ */
+
+#ifndef _I2C_LLD_H_
+#define _I2C_LLD_H_
+
+#if HAL_USE_I2C || defined(__DOXYGEN__)
+
+/*===========================================================================*/
+/* Driver constants. */
+/*===========================================================================*/
+
+/**
+ * @name TIMINGR register definitions
+ * @{
+ */
+#define STM32_TIMINGR_PRESC_MASK (15U << 28)
+#define STM32_TIMINGR_PRESC(n) ((n) << 28)
+#define STM32_TIMINGR_SCLDEL_MASK (15U << 20)
+#define STM32_TIMINGR_SCLDEL(n) ((n) << 20)
+#define STM32_TIMINGR_SDADEL_MASK (15U << 16)
+#define STM32_TIMINGR_SDADEL(n) ((n) << 16)
+#define STM32_TIMINGR_SCLH_MASK (255U << 8)
+#define STM32_TIMINGR_SCLH(n) ((n) << 8)
+#define STM32_TIMINGR_SCLL_MASK (255U << 0)
+#define STM32_TIMINGR_SCLL(n) ((n) << 0)
+/** @} */
+
+/*===========================================================================*/
+/* Driver pre-compile time settings. */
+/*===========================================================================*/
+
+/**
+ * @name Configuration options
+ * @{
+ */
+/**
+ * @brief I2C1 driver enable switch.
+ * @details If set to @p TRUE the support for I2C1 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C1) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C1 FALSE
+#endif
+
+/**
+ * @brief I2C2 driver enable switch.
+ * @details If set to @p TRUE the support for I2C2 is included.
+ * @note The default is @p FALSE.
+ */
+#if !defined(STM32_I2C_USE_I2C2) || defined(__DOXYGEN__)
+#define STM32_I2C_USE_I2C2 FALSE
+#endif
+
+/**
+ * @brief I2C timeout on busy condition in milliseconds.
+ */
+#if !defined(STM32_I2C_BUSY_TIMEOUT) || defined(__DOXYGEN__)
+#define STM32_I2C_BUSY_TIMEOUT 50
+#endif
+
+/**
+ * @brief I2C1 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C1_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C2 interrupt priority level setting.
+ */
+#if !defined(STM32_I2C_I2C2_IRQ_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_IRQ_PRIORITY 10
+#endif
+
+/**
+ * @brief I2C1 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_I2C_I2C1_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C1_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C2 DMA priority (0..3|lowest..highest).
+ * @note The priority level is used for both the TX and RX DMA streams but
+ * because of the streams ordering the RX stream has always priority
+ * over the TX stream.
+ */
+#if !defined(STM32_I2C_I2C2_DMA_PRIORITY) || defined(__DOXYGEN__)
+#define STM32_I2C_I2C2_DMA_PRIORITY 1
+#endif
+
+/**
+ * @brief I2C DMA error hook.
+ * @note The default action for DMA errors is a system halt because DMA
+ * error can only happen because programming errors.
+ */
+#if !defined(STM32_I2C_DMA_ERROR_HOOK) || defined(__DOXYGEN__)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
+#endif
+/** @} */
+
+/*===========================================================================*/
+/* Derived constants and error checks. */
+/*===========================================================================*/
+
+/** @brief error checks */
+#if STM32_I2C_USE_I2C1 && !STM32_HAS_I2C1
+#error "I2C1 not present in the selected device"
+#endif
+
+#if STM32_I2C_USE_I2C2 && !STM32_HAS_I2C2
+#error "I2C2 not present in the selected device"
+#endif
+
+#if !STM32_I2C_USE_I2C1 && !STM32_I2C_USE_I2C2
+#error "I2C driver activated but no I2C peripheral assigned"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_I2C_I2C1_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to I2C1"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !CORTEX_IS_VALID_KERNEL_PRIORITY(STM32_I2C_I2C2_IRQ_PRIORITY)
+#error "Invalid IRQ priority assigned to I2C2"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_I2C_I2C1_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to I2C1"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_PRIORITY(STM32_I2C_I2C2_DMA_PRIORITY)
+#error "Invalid DMA priority assigned to I2C2"
+#endif
+
+/* The following checks are only required when there is a DMA able to
+ reassign streams to different channels.*/
+#if STM32_ADVANCED_DMA
+/* Check on the presence of the DMA streams settings in mcuconf.h.*/
+#if STM32_I2C_USE_I2C1 && (!defined(STM32_I2C_I2C1_RX_DMA_STREAM) || \
+ !defined(STM32_I2C_I2C1_TX_DMA_STREAM))
+#error "I2C1 DMA streams not defined"
+#endif
+
+#if STM32_I2C_USE_I2C2 && (!defined(STM32_I2C_I2C2_RX_DMA_STREAM) || \
+ !defined(STM32_I2C_I2C2_TX_DMA_STREAM))
+#error "I2C2 DMA streams not defined"
+#endif
+
+/* Check on the validity of the assigned DMA channels.*/
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_RX_DMA_STREAM, \
+ STM32_I2C1_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 RX"
+#endif
+
+#if STM32_I2C_USE_I2C1 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C1_TX_DMA_STREAM, \
+ STM32_I2C1_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C1 TX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_RX_DMA_STREAM, \
+ STM32_I2C2_RX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 RX"
+#endif
+
+#if STM32_I2C_USE_I2C2 && \
+ !STM32_DMA_IS_VALID_ID(STM32_I2C_I2C2_TX_DMA_STREAM, \
+ STM32_I2C2_TX_DMA_MSK)
+#error "invalid DMA stream associated to I2C2 TX"
+#endif
+#endif /* STM32_ADVANCED_DMA */
+
+#if !defined(STM32_DMA_REQUIRED)
+#define STM32_DMA_REQUIRED
+#endif
+
+/* Check clock range. */
+
+/*===========================================================================*/
+/* Driver data structures and types. */
+/*===========================================================================*/
+
+/**
+ * @brief Type representing I2C address.
+ */
+typedef uint16_t i2caddr_t;
+
+/**
+ * @brief I2C Driver condition flags type.
+ */
+typedef uint32_t i2cflags_t;
+
+/**
+ * @brief Driver configuration structure.
+ */
+typedef struct {
+ /**
+ * @brief TIMINGR register initialization.
+ * @note Refer to the STM32 reference manual, the values are affected
+ * by the system clock settings in mcuconf.h.
+ */
+ uint32_t timingr;
+ /**
+ * @brief CR1 register initialization.
+ * @note Leave to zero unless you know what you are doing.
+ */
+ uint32_t cr1;
+ /**
+ * @brief CR2 register initialization.
+ * @note Only the ADD10 bit can eventually be specified here.
+ */
+ uint32_t cr2;
+} I2CConfig;
+
+/**
+ * @brief Type of a structure representing an I2C driver.
+ */
+typedef struct I2CDriver I2CDriver;
+
+/**
+ * @brief Structure representing an I2C driver.
+ */
+struct I2CDriver{
+ /**
+ * @brief Driver state.
+ */
+ i2cstate_t state;
+ /**
+ * @brief Current configuration data.
+ */
+ const I2CConfig *config;
+ /**
+ * @brief Error flags.
+ */
+ i2cflags_t errors;
+#if I2C_USE_MUTUAL_EXCLUSION || defined(__DOXYGEN__)
+ mutex_t mutex;
+#endif /* I2C_USE_MUTUAL_EXCLUSION */
+#if defined(I2C_DRIVER_EXT_FIELDS)
+ I2C_DRIVER_EXT_FIELDS
+#endif
+ /* End of the mandatory fields.*/
+ /**
+ * @brief Thread waiting for I/O completion.
+ */
+ thread_reference_t thread;
+ /**
+ * @brief Current slave address without R/W bit.
+ */
+ i2caddr_t addr;
+ /**
+ * @brief RX DMA mode bit mask.
+ */
+ uint32_t rxdmamode;
+ /**
+ * @brief TX DMA mode bit mask.
+ */
+ uint32_t txdmamode;
+ /**
+ * @brief Receive DMA channel.
+ */
+ const stm32_dma_stream_t *dmarx;
+ /**
+ * @brief Transmit DMA channel.
+ */
+ const stm32_dma_stream_t *dmatx;
+ /**
+ * @brief Pointer to the I2Cx registers block.
+ */
+ I2C_TypeDef *i2c;
+};
+
+/*===========================================================================*/
+/* Driver macros. */
+/*===========================================================================*/
+
+/**
+ * @brief Get errors from I2C driver.
+ *
+ * @param[in] i2cp pointer to the @p I2CDriver object
+ *
+ * @notapi
+ */
+#define i2c_lld_get_errors(i2cp) ((i2cp)->errors)
+
+/*===========================================================================*/
+/* External declarations. */
+/*===========================================================================*/
+
+#if !defined(__DOXYGEN__)
+#if STM32_I2C_USE_I2C1
+extern I2CDriver I2CD1;
+#endif
+
+#if STM32_I2C_USE_I2C2
+extern I2CDriver I2CD2;
+#endif
+
+#endif /* !defined(__DOXYGEN__) */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+ void i2c_lld_init(void);
+ void i2c_lld_start(I2CDriver *i2cp);
+ void i2c_lld_stop(I2CDriver *i2cp);
+ msg_t i2c_lld_master_transmit_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ const uint8_t *txbuf, size_t txbytes,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+ msg_t i2c_lld_master_receive_timeout(I2CDriver *i2cp, i2caddr_t addr,
+ uint8_t *rxbuf, size_t rxbytes,
+ systime_t timeout);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAL_USE_I2C */
+
+#endif /* _I2C_LLD_H_ */
+
+/** @} */
|