diff options
Diffstat (limited to 'os/hal/platforms/STM32/TIMv1/icu_lld.c')
-rw-r--r-- | os/hal/platforms/STM32/TIMv1/icu_lld.c | 653 |
1 files changed, 0 insertions, 653 deletions
diff --git a/os/hal/platforms/STM32/TIMv1/icu_lld.c b/os/hal/platforms/STM32/TIMv1/icu_lld.c deleted file mode 100644 index ded4f806c..000000000 --- a/os/hal/platforms/STM32/TIMv1/icu_lld.c +++ /dev/null @@ -1,653 +0,0 @@ -/*
- ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-/*
- Concepts and parts of this file have been contributed by Fabio Utzig and
- Xo Wang.
- */
-
-/**
- * @file STM32/icu_lld.c
- * @brief STM32 ICU subsystem low level driver header.
- *
- * @addtogroup ICU
- * @{
- */
-
-#include "ch.h"
-#include "hal.h"
-
-#if HAL_USE_ICU || defined(__DOXYGEN__)
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver exported variables. */
-/*===========================================================================*/
-
-/**
- * @brief ICUD1 driver identifier.
- * @note The driver ICUD1 allocates the complex timer TIM1 when enabled.
- */
-#if STM32_ICU_USE_TIM1 || defined(__DOXYGEN__)
-ICUDriver ICUD1;
-#endif
-
-/**
- * @brief ICUD2 driver identifier.
- * @note The driver ICUD1 allocates the timer TIM2 when enabled.
- */
-#if STM32_ICU_USE_TIM2 || defined(__DOXYGEN__)
-ICUDriver ICUD2;
-#endif
-
-/**
- * @brief ICUD3 driver identifier.
- * @note The driver ICUD1 allocates the timer TIM3 when enabled.
- */
-#if STM32_ICU_USE_TIM3 || defined(__DOXYGEN__)
-ICUDriver ICUD3;
-#endif
-
-/**
- * @brief ICUD4 driver identifier.
- * @note The driver ICUD4 allocates the timer TIM4 when enabled.
- */
-#if STM32_ICU_USE_TIM4 || defined(__DOXYGEN__)
-ICUDriver ICUD4;
-#endif
-
-/**
- * @brief ICUD5 driver identifier.
- * @note The driver ICUD5 allocates the timer TIM5 when enabled.
- */
-#if STM32_ICU_USE_TIM5 || defined(__DOXYGEN__)
-ICUDriver ICUD5;
-#endif
-
-/**
- * @brief ICUD8 driver identifier.
- * @note The driver ICUD8 allocates the timer TIM8 when enabled.
- */
-#if STM32_ICU_USE_TIM8 || defined(__DOXYGEN__)
-ICUDriver ICUD8;
-#endif
-
-/**
- * @brief ICUD9 driver identifier.
- * @note The driver ICUD9 allocates the timer TIM9 when enabled.
- */
-#if STM32_ICU_USE_TIM9 || defined(__DOXYGEN__)
-ICUDriver ICUD9;
-#endif
-
-/*===========================================================================*/
-/* Driver local variables and types. */
-/*===========================================================================*/
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-/**
- * @brief Shared IRQ handler.
- *
- * @param[in] icup pointer to the @p ICUDriver object
- */
-static void icu_lld_serve_interrupt(ICUDriver *icup) {
- uint16_t sr;
-
- sr = icup->tim->SR;
- sr &= icup->tim->DIER & STM32_TIM_DIER_IRQ_MASK;
- icup->tim->SR = ~sr;
- if (icup->config->channel == ICU_CHANNEL_1) {
- if ((sr & STM32_TIM_SR_CC1IF) != 0)
- _icu_isr_invoke_period_cb(icup);
- if ((sr & STM32_TIM_SR_CC2IF) != 0)
- _icu_isr_invoke_width_cb(icup);
- } else {
- if ((sr & STM32_TIM_SR_CC1IF) != 0)
- _icu_isr_invoke_width_cb(icup);
- if ((sr & STM32_TIM_SR_CC2IF) != 0)
- _icu_isr_invoke_period_cb(icup);
- }
- if ((sr & STM32_TIM_SR_UIF) != 0)
- _icu_isr_invoke_overflow_cb(icup);
-}
-
-/*===========================================================================*/
-/* Driver interrupt handlers. */
-/*===========================================================================*/
-
-#if STM32_ICU_USE_TIM1
-#if !defined(STM32_TIM1_UP_HANDLER)
-#error "STM32_TIM1_UP_HANDLER not defined"
-#endif
-/**
- * @brief TIM1 compare interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM1_UP_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD1);
-
- CH_IRQ_EPILOGUE();
-}
-
-#if !defined(STM32_TIM1_CC_HANDLER)
-#error "STM32_TIM1_CC_HANDLER not defined"
-#endif
-/**
- * @brief TIM1 compare interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM1_CC_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD1);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM1 */
-
-#if STM32_ICU_USE_TIM2
-#if !defined(STM32_TIM2_HANDLER)
-#error "STM32_TIM2_HANDLER not defined"
-#endif
-/**
- * @brief TIM2 interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM2_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD2);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM2 */
-
-#if STM32_ICU_USE_TIM3
-#if !defined(STM32_TIM3_HANDLER)
-#error "STM32_TIM3_HANDLER not defined"
-#endif
-/**
- * @brief TIM3 interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM3_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD3);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM3 */
-
-#if STM32_ICU_USE_TIM4
-#if !defined(STM32_TIM4_HANDLER)
-#error "STM32_TIM4_HANDLER not defined"
-#endif
-/**
- * @brief TIM4 interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM4_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD4);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM4 */
-
-#if STM32_ICU_USE_TIM5
-#if !defined(STM32_TIM5_HANDLER)
-#error "STM32_TIM5_HANDLER not defined"
-#endif
-/**
- * @brief TIM5 interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM5_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD5);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM5 */
-
-#if STM32_ICU_USE_TIM8
-#if !defined(STM32_TIM8_UP_HANDLER)
-#error "STM32_TIM8_UP_HANDLER not defined"
-#endif
-/**
- * @brief TIM8 compare interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM8_UP_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD8);
-
- CH_IRQ_EPILOGUE();
-}
-
-#if !defined(STM32_TIM8_CC_HANDLER)
-#error "STM32_TIM8_CC_HANDLER not defined"
-#endif
-/**
- * @brief TIM8 compare interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM8_CC_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD8);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM8 */
-
-#if STM32_ICU_USE_TIM9
-#if !defined(STM32_TIM9_HANDLER)
-#error "STM32_TIM9_HANDLER not defined"
-#endif
-/**
- * @brief TIM9 interrupt handler.
- * @note It is assumed that the various sources are only activated if the
- * associated callback pointer is not equal to @p NULL in order to not
- * perform an extra check in a potentially critical interrupt handler.
- *
- * @isr
- */
-CH_IRQ_HANDLER(STM32_TIM9_HANDLER) {
-
- CH_IRQ_PROLOGUE();
-
- icu_lld_serve_interrupt(&ICUD9);
-
- CH_IRQ_EPILOGUE();
-}
-#endif /* STM32_ICU_USE_TIM9 */
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/**
- * @brief Low level ICU driver initialization.
- *
- * @notapi
- */
-void icu_lld_init(void) {
-
-#if STM32_ICU_USE_TIM1
- /* Driver initialization.*/
- icuObjectInit(&ICUD1);
- ICUD1.tim = STM32_TIM1;
-#endif
-
-#if STM32_ICU_USE_TIM2
- /* Driver initialization.*/
- icuObjectInit(&ICUD2);
- ICUD2.tim = STM32_TIM2;
-#endif
-
-#if STM32_ICU_USE_TIM3
- /* Driver initialization.*/
- icuObjectInit(&ICUD3);
- ICUD3.tim = STM32_TIM3;
-#endif
-
-#if STM32_ICU_USE_TIM4
- /* Driver initialization.*/
- icuObjectInit(&ICUD4);
- ICUD4.tim = STM32_TIM4;
-#endif
-
-#if STM32_ICU_USE_TIM5
- /* Driver initialization.*/
- icuObjectInit(&ICUD5);
- ICUD5.tim = STM32_TIM5;
-#endif
-
-#if STM32_ICU_USE_TIM8
- /* Driver initialization.*/
- icuObjectInit(&ICUD8);
- ICUD8.tim = STM32_TIM8;
-#endif
-
-#if STM32_ICU_USE_TIM9
- /* Driver initialization.*/
- icuObjectInit(&ICUD9);
- ICUD9.tim = STM32_TIM9;
-#endif
-}
-
-/**
- * @brief Configures and activates the ICU peripheral.
- *
- * @param[in] icup pointer to the @p ICUDriver object
- *
- * @notapi
- */
-void icu_lld_start(ICUDriver *icup) {
- uint32_t psc;
-
- chDbgAssert((icup->config->channel == ICU_CHANNEL_1) ||
- (icup->config->channel == ICU_CHANNEL_2),
- "icu_lld_start(), #1", "invalid input");
-
- if (icup->state == ICU_STOP) {
- /* Clock activation and timer reset.*/
-#if STM32_ICU_USE_TIM1
- if (&ICUD1 == icup) {
- rccEnableTIM1(FALSE);
- rccResetTIM1();
- nvicEnableVector(STM32_TIM1_UP_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM1_IRQ_PRIORITY));
- nvicEnableVector(STM32_TIM1_CC_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM1_IRQ_PRIORITY));
-#if defined(STM32_TIM1CLK)
- icup->clock = STM32_TIM1CLK;
-#else
- icup->clock = STM32_TIMCLK2;
-#endif
- }
-#endif
-#if STM32_ICU_USE_TIM2
- if (&ICUD2 == icup) {
- rccEnableTIM2(FALSE);
- rccResetTIM2();
- nvicEnableVector(STM32_TIM2_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM2_IRQ_PRIORITY));
- icup->clock = STM32_TIMCLK1;
- }
-#endif
-#if STM32_ICU_USE_TIM3
- if (&ICUD3 == icup) {
- rccEnableTIM3(FALSE);
- rccResetTIM3();
- nvicEnableVector(STM32_TIM3_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM3_IRQ_PRIORITY));
- icup->clock = STM32_TIMCLK1;
- }
-#endif
-#if STM32_ICU_USE_TIM4
- if (&ICUD4 == icup) {
- rccEnableTIM4(FALSE);
- rccResetTIM4();
- nvicEnableVector(STM32_TIM4_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM4_IRQ_PRIORITY));
- icup->clock = STM32_TIMCLK1;
- }
-#endif
-#if STM32_ICU_USE_TIM5
- if (&ICUD5 == icup) {
- rccEnableTIM5(FALSE);
- rccResetTIM5();
- nvicEnableVector(STM32_TIM5_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM5_IRQ_PRIORITY));
- icup->clock = STM32_TIMCLK1;
- }
-#endif
-#if STM32_ICU_USE_TIM8
- if (&ICUD8 == icup) {
- rccEnableTIM8(FALSE);
- rccResetTIM8();
- nvicEnableVector(STM32_TIM8_UP_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM8_IRQ_PRIORITY));
- nvicEnableVector(STM32_TIM8_CC_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM8_IRQ_PRIORITY));
-#if defined(STM32_TIM8CLK)
- icup->clock = STM32_TIM8CLK;
-#else
- icup->clock = STM32_TIMCLK2;
-#endif
- }
-#endif
-#if STM32_ICU_USE_TIM9
- if (&ICUD9 == icup) {
- rccEnableTIM9(FALSE);
- rccResetTIM9();
- nvicEnableVector(STM32_TIM9_NUMBER,
- CORTEX_PRIORITY_MASK(STM32_ICU_TIM9_IRQ_PRIORITY));
- icup->clock = STM32_TIMCLK2;
- }
-#endif
- }
- else {
- /* Driver re-configuration scenario, it must be stopped first.*/
- icup->tim->CR1 = 0; /* Timer disabled. */
- icup->tim->DIER = icup->config->dier &/* DMA-related DIER settings. */
- ~STM32_TIM_DIER_IRQ_MASK;
- icup->tim->SR = 0; /* Clear eventual pending IRQs. */
- icup->tim->CCR[0] = 0; /* Comparator 1 disabled. */
- icup->tim->CCR[1] = 0; /* Comparator 2 disabled. */
- icup->tim->CNT = 0; /* Counter reset to zero. */
- }
-
- /* Timer configuration.*/
- psc = (icup->clock / icup->config->frequency) - 1;
- chDbgAssert((psc <= 0xFFFF) &&
- ((psc + 1) * icup->config->frequency) == icup->clock,
- "icu_lld_start(), #1", "invalid frequency");
- icup->tim->PSC = (uint16_t)psc;
- icup->tim->ARR = 0xFFFF;
-
- if (icup->config->channel == ICU_CHANNEL_1) {
- /* Selected input 1.
- CCMR1_CC1S = 01 = CH1 Input on TI1.
- CCMR1_CC2S = 10 = CH2 Input on TI1.*/
- icup->tim->CCMR1 = STM32_TIM_CCMR1_CC1S(1) | STM32_TIM_CCMR1_CC2S(2);
-
- /* SMCR_TS = 101, input is TI1FP1.
- SMCR_SMS = 100, reset on rising edge.*/
- icup->tim->SMCR = STM32_TIM_SMCR_TS(5) | STM32_TIM_SMCR_SMS(4);
-
- /* The CCER settings depend on the selected trigger mode.
- ICU_INPUT_ACTIVE_HIGH: Active on rising edge, idle on falling edge.
- ICU_INPUT_ACTIVE_LOW: Active on falling edge, idle on rising edge.*/
- if (icup->config->mode == ICU_INPUT_ACTIVE_HIGH)
- icup->tim->CCER = STM32_TIM_CCER_CC1E |
- STM32_TIM_CCER_CC2E | STM32_TIM_CCER_CC2P;
- else
- icup->tim->CCER = STM32_TIM_CCER_CC1E | STM32_TIM_CCER_CC1P |
- STM32_TIM_CCER_CC2E;
-
- /* Direct pointers to the capture registers in order to make reading
- data faster from within callbacks.*/
- icup->wccrp = &icup->tim->CCR[1];
- icup->pccrp = &icup->tim->CCR[0];
- } else {
- /* Selected input 2.
- CCMR1_CC1S = 10 = CH1 Input on TI2.
- CCMR1_CC2S = 01 = CH2 Input on TI2.*/
- icup->tim->CCMR1 = STM32_TIM_CCMR1_CC1S(2) | STM32_TIM_CCMR1_CC2S(1);
-
- /* SMCR_TS = 110, input is TI2FP2.
- SMCR_SMS = 100, reset on rising edge.*/
- icup->tim->SMCR = STM32_TIM_SMCR_TS(6) | STM32_TIM_SMCR_SMS(4);
-
- /* The CCER settings depend on the selected trigger mode.
- ICU_INPUT_ACTIVE_HIGH: Active on rising edge, idle on falling edge.
- ICU_INPUT_ACTIVE_LOW: Active on falling edge, idle on rising edge.*/
- if (icup->config->mode == ICU_INPUT_ACTIVE_HIGH)
- icup->tim->CCER = STM32_TIM_CCER_CC1E | STM32_TIM_CCER_CC1P |
- STM32_TIM_CCER_CC2E;
- else
- icup->tim->CCER = STM32_TIM_CCER_CC1E |
- STM32_TIM_CCER_CC2E | STM32_TIM_CCER_CC2P;
-
- /* Direct pointers to the capture registers in order to make reading
- data faster from within callbacks.*/
- icup->wccrp = &icup->tim->CCR[0];
- icup->pccrp = &icup->tim->CCR[1];
- }
-}
-
-/**
- * @brief Deactivates the ICU peripheral.
- *
- * @param[in] icup pointer to the @p ICUDriver object
- *
- * @notapi
- */
-void icu_lld_stop(ICUDriver *icup) {
-
- if (icup->state == ICU_READY) {
- /* Clock deactivation.*/
- icup->tim->CR1 = 0; /* Timer disabled. */
- icup->tim->DIER = 0; /* All IRQs disabled. */
- icup->tim->SR = 0; /* Clear eventual pending IRQs. */
-
-#if STM32_ICU_USE_TIM1
- if (&ICUD1 == icup) {
- nvicDisableVector(STM32_TIM1_UP_NUMBER);
- nvicDisableVector(STM32_TIM1_CC_NUMBER);
- rccDisableTIM1(FALSE);
- }
-#endif
-#if STM32_ICU_USE_TIM2
- if (&ICUD2 == icup) {
- nvicDisableVector(STM32_TIM2_NUMBER);
- rccDisableTIM2(FALSE);
- }
-#endif
-#if STM32_ICU_USE_TIM3
- if (&ICUD3 == icup) {
- nvicDisableVector(STM32_TIM3_NUMBER);
- rccDisableTIM3(FALSE);
- }
-#endif
-#if STM32_ICU_USE_TIM4
- if (&ICUD4 == icup) {
- nvicDisableVector(STM32_TIM4_NUMBER);
- rccDisableTIM4(FALSE);
- }
-#endif
-#if STM32_ICU_USE_TIM5
- if (&ICUD5 == icup) {
- nvicDisableVector(STM32_TIM5_NUMBER);
- rccDisableTIM5(FALSE);
- }
-#endif
-#if STM32_ICU_USE_TIM8
- if (&ICUD8 == icup) {
- nvicDisableVector(STM32_TIM8_UP_NUMBER);
- nvicDisableVector(STM32_TIM8_CC_NUMBER);
- rccDisableTIM8(FALSE);
- }
-#endif
-#if STM32_ICU_USE_TIM9
- if (&ICUD9 == icup) {
- nvicDisableVector(STM32_TIM9_NUMBER);
- rccDisableTIM9(FALSE);
- }
-#endif
- }
-}
-
-/**
- * @brief Enables the input capture.
- *
- * @param[in] icup pointer to the @p ICUDriver object
- *
- * @notapi
- */
-void icu_lld_enable(ICUDriver *icup) {
-
- icup->tim->EGR |= STM32_TIM_EGR_UG;
- icup->tim->SR = 0; /* Clear pending IRQs (if any). */
- if (icup->config->channel == ICU_CHANNEL_1) {
- if (icup->config->period_cb != NULL)
- icup->tim->DIER |= STM32_TIM_DIER_CC1IE;
- if (icup->config->width_cb != NULL)
- icup->tim->DIER |= STM32_TIM_DIER_CC2IE;
- } else {
- if (icup->config->width_cb != NULL)
- icup->tim->DIER |= STM32_TIM_DIER_CC1IE;
- if (icup->config->period_cb != NULL)
- icup->tim->DIER |= STM32_TIM_DIER_CC2IE;
- }
- if (icup->config->overflow_cb != NULL)
- icup->tim->DIER |= STM32_TIM_DIER_UIE;
- icup->tim->CR1 = STM32_TIM_CR1_URS | STM32_TIM_CR1_CEN;
-}
-
-/**
- * @brief Disables the input capture.
- *
- * @param[in] icup pointer to the @p ICUDriver object
- *
- * @notapi
- */
-void icu_lld_disable(ICUDriver *icup) {
-
- icup->tim->CR1 = 0; /* Initially stopped. */
- icup->tim->SR = 0; /* Clear pending IRQs (if any). */
-
- /* All interrupts disabled.*/
- icup->tim->DIER &= ~STM32_TIM_DIER_IRQ_MASK;
-}
-
-#endif /* HAL_USE_ICU */
-
-/** @} */
|