aboutsummaryrefslogtreecommitdiffstats
path: root/demos/AVR/NIL-DIGISPARK-ATTINY-167
diff options
context:
space:
mode:
authorTheodore Ateba <tf.ateba@gmail.com>2017-07-21 09:49:36 +0000
committerTheodore Ateba <tf.ateba@gmail.com>2017-07-21 09:49:36 +0000
commitb693c748d55f60e5380e26efac95d31a46f1c169 (patch)
tree060092a3958dda0d777f76fc6407eb49827452fe /demos/AVR/NIL-DIGISPARK-ATTINY-167
parent88aa29d4aac0b8f08bf7bf4a6ff81205b6004e9b (diff)
downloadChibiOS-b693c748d55f60e5380e26efac95d31a46f1c169.tar.gz
ChibiOS-b693c748d55f60e5380e26efac95d31a46f1c169.tar.bz2
ChibiOS-b693c748d55f60e5380e26efac95d31a46f1c169.zip
Add a readme file to the DIGISPARK ATiny 167 NIL demo.
git-svn-id: svn://svn.code.sf.net/p/chibios/svn/trunk@10335 35acf78f-673a-0410-8e92-d51de3d6d3f4
Diffstat (limited to 'demos/AVR/NIL-DIGISPARK-ATTINY-167')
-rw-r--r--demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt28
1 files changed, 28 insertions, 0 deletions
diff --git a/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt b/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt
new file mode 100644
index 000000000..882bf35e1
--- /dev/null
+++ b/demos/AVR/NIL-DIGISPARK-ATTINY-167/readme.txt
@@ -0,0 +1,28 @@
+******************************************************************************
+** ChibiOS/NIL port for Atmel AVR ATTiny167. **
+******************************************************************************
+
+** TARGET **
+
+The demo runs on a Digispark Pro board based on an ATtiny167.
+
+** The Demo **
+
+The demo currently just toggles the test/status LED every second.
+The LED is connected to the PB1 pin of the ATtiny167 MCU.
+This pin corresponds to P1 on the Digispark Pro board.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain.
+It should build with WinAVR too!
+Just run the command "make" to build this example.
+
+** Notes **
+
+The ATtiny167 is pre-programmed with a bootloader.
+Thus it can act as an USB device.
+The Digispark Pro runs the “micronucleus” bootloader.
+This bootloader comes with a command line tool which can be used to
+program the board. Form more details, look at the Makefile or the github at
+https://github.com/micronucleus/micronucleus