blob: 882bf35e139491f7911b6e54dcce468f675b74f5 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
|
******************************************************************************
** ChibiOS/NIL port for Atmel AVR ATTiny167. **
******************************************************************************
** TARGET **
The demo runs on a Digispark Pro board based on an ATtiny167.
** The Demo **
The demo currently just toggles the test/status LED every second.
The LED is connected to the PB1 pin of the ATtiny167 MCU.
This pin corresponds to P1 on the Digispark Pro board.
** Build Procedure **
The demo was built using the GCC AVR toolchain.
It should build with WinAVR too!
Just run the command "make" to build this example.
** Notes **
The ATtiny167 is pre-programmed with a bootloader.
Thus it can act as an USB device.
The Digispark Pro runs the “micronucleus” bootloader.
This bootloader comes with a command line tool which can be used to
program the board. Form more details, look at the Makefile or the github at
https://github.com/micronucleus/micronucleus
|
