git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4

1 files changed, 0 insertions, 143 deletions

diff --git a/boards/ST_STM32VL_DISCOVERY/board.h b/boards/ST_STM32VL_DISCOVERY/board.h
deleted file mode 100644
index 36e157d48..000000000
--- a/boards/ST_STM32VL_DISCOVERY/board.h
+++ /dev/null
@@ -1,143 +0,0 @@
-/*

-    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio

-

-    Licensed under the Apache License, Version 2.0 (the "License");

-    you may not use this file except in compliance with the License.

-    You may obtain a copy of the License at

-

-        http://www.apache.org/licenses/LICENSE-2.0

-

-    Unless required by applicable law or agreed to in writing, software

-    distributed under the License is distributed on an "AS IS" BASIS,

-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

-    See the License for the specific language governing permissions and

-    limitations under the License.

-*/

-

-#ifndef _BOARD_H_

-#define _BOARD_H_

-

-/*

- * Setup for STMicroelectronics STM32VL-Discovery board.

- */

-

-/*

- * Board identifier.

- */

-#define BOARD_ST_STM32VL_DISCOVERY

-#define BOARD_NAME              "ST STM32VL-Discovery"

-

-/*

- * Board frequencies.

- */

-#define STM32_LSECLK            32768

-#define STM32_HSECLK            8000000

-

-/*

- * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.

- */

-#define STM32F10X_MD_VL

-

-/*

- * IO pins assignments.

- */

-#define GPIOA_BUTTON            0

-#define GPIOA_SPI1NSS           4

-

-#define GPIOB_SPI2NSS           12

-

-#define GPIOC_LED4              8

-#define GPIOC_LED3              9

-

-/*

- * I/O ports initial setup, this configuration is established soon after reset

- * in the initialization code.

- *

- * The digits have the following meaning:

- *   0 - Analog input.

- *   1 - Push Pull output 10MHz.

- *   2 - Push Pull output 2MHz.

- *   3 - Push Pull output 50MHz.

- *   4 - Digital input.

- *   5 - Open Drain output 10MHz.

- *   6 - Open Drain output 2MHz.

- *   7 - Open Drain output 50MHz.

- *   8 - Digital input with PullUp or PullDown resistor depending on ODR.

- *   9 - Alternate Push Pull output 10MHz.

- *   A - Alternate Push Pull output 2MHz.

- *   B - Alternate Push Pull output 50MHz.

- *   C - Reserved.

- *   D - Alternate Open Drain output 10MHz.

- *   E - Alternate Open Drain output 2MHz.

- *   F - Alternate Open Drain output 50MHz.

- * Please refer to the STM32 Reference Manual for details.

- */

-

-/*

- * Port A setup.

- * Everything input with pull-up except:

- * PA0  - Normal input      (BUTTON).

- * PA2  - Alternate output  (USART2 TX).

- * PA3  - Normal input      (USART2 RX).

- * PA4  - Push pull output  (SPI1 NSS), initially high state.

- * PA5  - Alternate output  (SPI1 SCK).

- * PA6  - Normal input      (SPI1 MISO).

- * PA7  - Alternate output  (SPI1 MOSI).

- * PA9  - Alternate output  (USART1 TX).

- * PA10 - Normal input      (USART1 RX).

- */

-#define VAL_GPIOACRL            0xB4B34B84      /*  PA7...PA0 */

-#define VAL_GPIOACRH            0x888884B8      /* PA15...PA8 */

-#define VAL_GPIOAODR            0xFFFFFFFF

-

-/*

- * Port B setup.

- * Everything input with pull-up except:

- * PB12 - Push pull output  (SPI2 NSS), initially high state.

- * PB13 - Alternate output  (SPI2 SCK).

- * PB14 - Normal input      (SPI2 MISO).

- * PB15 - Alternate output  (SPI2 MOSI).

- */

-#define VAL_GPIOBCRL            0x88888888      /*  PB7...PB0 */

-#define VAL_GPIOBCRH            0xB4B38888      /* PB15...PB8 */

-#define VAL_GPIOBODR            0xFFFFFFFF

-

-/*

- * Port C setup.

- * Everything input with pull-up except:

- * PC8  - Push-pull output (LED4), initially low state.

- * PC9  - Push-pull output (LED3), initially low state.

- */

-#define VAL_GPIOCCRL            0x88888888      /*  PC7...PC0 */

-#define VAL_GPIOCCRH            0x88888833      /* PC15...PC8 */

-#define VAL_GPIOCODR            0xFFFFFCFF

-

-/*

- * Port D setup.

- * Everything input with pull-up except:

- * PD0  - Normal input (XTAL).

- * PD1  - Normal input (XTAL).

- */

-#define VAL_GPIODCRL            0x88888844      /*  PD7...PD0 */

-#define VAL_GPIODCRH            0x88888888      /* PD15...PD8 */

-#define VAL_GPIODODR            0xFFFFFFFF

-

-/*

- * Port E setup.

- * Everything input with pull-up except:

- */

-#define VAL_GPIOECRL            0x88888888      /*  PE7...PE0 */

-#define VAL_GPIOECRH            0x88888888      /* PE15...PE8 */

-#define VAL_GPIOEODR            0xFFFFFFFF

-

-#if !defined(_FROM_ASM_)

-#ifdef __cplusplus

-extern "C" {

-#endif

-  void boardInit(void);

-#ifdef __cplusplus

-}

-#endif

-#endif /* _FROM_ASM_ */

-

-#endif /* _BOARD_H_ */