From 51b16c7a2dbd4f3d0be30049a4dad702961bfb8b Mon Sep 17 00:00:00 2001 From: gdisirio Date: Sat, 10 Aug 2013 14:58:16 +0000 Subject: git-svn-id: svn://svn.code.sf.net/p/chibios/svn/branches/kernel_3_dev@6126 35acf78f-673a-0410-8e92-d51de3d6d3f4 --- boards/ST_STM32VL_DISCOVERY/board.h | 143 ------------------------------------ 1 file changed, 143 deletions(-) delete mode 100644 boards/ST_STM32VL_DISCOVERY/board.h (limited to 'boards/ST_STM32VL_DISCOVERY/board.h') diff --git a/boards/ST_STM32VL_DISCOVERY/board.h b/boards/ST_STM32VL_DISCOVERY/board.h deleted file mode 100644 index 36e157d48..000000000 --- a/boards/ST_STM32VL_DISCOVERY/board.h +++ /dev/null @@ -1,143 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for STMicroelectronics STM32VL-Discovery board. - */ - -/* - * Board identifier. - */ -#define BOARD_ST_STM32VL_DISCOVERY -#define BOARD_NAME "ST STM32VL-Discovery" - -/* - * Board frequencies. - */ -#define STM32_LSECLK 32768 -#define STM32_HSECLK 8000000 - -/* - * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. - */ -#define STM32F10X_MD_VL - -/* - * IO pins assignments. - */ -#define GPIOA_BUTTON 0 -#define GPIOA_SPI1NSS 4 - -#define GPIOB_SPI2NSS 12 - -#define GPIOC_LED4 8 -#define GPIOC_LED3 9 - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * - * The digits have the following meaning: - * 0 - Analog input. - * 1 - Push Pull output 10MHz. - * 2 - Push Pull output 2MHz. - * 3 - Push Pull output 50MHz. - * 4 - Digital input. - * 5 - Open Drain output 10MHz. - * 6 - Open Drain output 2MHz. - * 7 - Open Drain output 50MHz. - * 8 - Digital input with PullUp or PullDown resistor depending on ODR. - * 9 - Alternate Push Pull output 10MHz. - * A - Alternate Push Pull output 2MHz. - * B - Alternate Push Pull output 50MHz. - * C - Reserved. - * D - Alternate Open Drain output 10MHz. - * E - Alternate Open Drain output 2MHz. - * F - Alternate Open Drain output 50MHz. - * Please refer to the STM32 Reference Manual for details. - */ - -/* - * Port A setup. - * Everything input with pull-up except: - * PA0 - Normal input (BUTTON). - * PA2 - Alternate output (USART2 TX). - * PA3 - Normal input (USART2 RX). - * PA4 - Push pull output (SPI1 NSS), initially high state. - * PA5 - Alternate output (SPI1 SCK). - * PA6 - Normal input (SPI1 MISO). - * PA7 - Alternate output (SPI1 MOSI). - * PA9 - Alternate output (USART1 TX). - * PA10 - Normal input (USART1 RX). - */ -#define VAL_GPIOACRL 0xB4B34B84 /* PA7...PA0 */ -#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ -#define VAL_GPIOAODR 0xFFFFFFFF - -/* - * Port B setup. - * Everything input with pull-up except: - * PB12 - Push pull output (SPI2 NSS), initially high state. - * PB13 - Alternate output (SPI2 SCK). - * PB14 - Normal input (SPI2 MISO). - * PB15 - Alternate output (SPI2 MOSI). - */ -#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ -#define VAL_GPIOBCRH 0xB4B38888 /* PB15...PB8 */ -#define VAL_GPIOBODR 0xFFFFFFFF - -/* - * Port C setup. - * Everything input with pull-up except: - * PC8 - Push-pull output (LED4), initially low state. - * PC9 - Push-pull output (LED3), initially low state. - */ -#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ -#define VAL_GPIOCCRH 0x88888833 /* PC15...PC8 */ -#define VAL_GPIOCODR 0xFFFFFCFF - -/* - * Port D setup. - * Everything input with pull-up except: - * PD0 - Normal input (XTAL). - * PD1 - Normal input (XTAL). - */ -#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ -#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ -#define VAL_GPIODODR 0xFFFFFFFF - -/* - * Port E setup. - * Everything input with pull-up except: - */ -#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ -#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ -#define VAL_GPIOEODR 0xFFFFFFFF - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ -- cgit v1.2.3