diff options
Diffstat (limited to 'roms/u-boot/board/prodrive/p3p440/p3p440.c')
| -rw-r--r-- | roms/u-boot/board/prodrive/p3p440/p3p440.c | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/roms/u-boot/board/prodrive/p3p440/p3p440.c b/roms/u-boot/board/prodrive/p3p440/p3p440.c new file mode 100644 index 00000000..929e8eb1 --- /dev/null +++ b/roms/u-boot/board/prodrive/p3p440/p3p440.c @@ -0,0 +1,177 @@ +/* + * (C) Copyright 2005 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/processor.h> +#include <command.h> + +#include "p3p440.h" + +DECLARE_GLOBAL_DATA_PTR; + +void set_led(int color) +{ + switch (color) { + case LED_OFF: + out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_LED_GREEN & ~CONFIG_SYS_LED_RED); + break; + + case LED_GREEN: + out32(GPIO0_OR, (in32(GPIO0_OR) | CONFIG_SYS_LED_GREEN) & ~CONFIG_SYS_LED_RED); + break; + + case LED_RED: + out32(GPIO0_OR, (in32(GPIO0_OR) | CONFIG_SYS_LED_RED) & ~CONFIG_SYS_LED_GREEN); + break; + + case LED_ORANGE: + out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_LED_GREEN | CONFIG_SYS_LED_RED); + break; + } +} + +static int is_monarch(void) +{ + out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_GPIO_RDY); + udelay(1000); + + if (in32(GPIO0_IR) & CONFIG_SYS_MONARCH_IO) + return 0; + else + return 1; +} + +static void wait_for_pci_ready(void) +{ + /* + * Configure EREADY_IO as input + */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~CONFIG_SYS_EREADY_IO); + udelay(1000); + + for (;;) { + if (in32(GPIO0_IR) & CONFIG_SYS_EREADY_IO) + return; + } + +} + +int board_early_init_f(void) +{ + uint reg; + + /*-------------------------------------------------------------------- + * Setup the external bus controller/chip selects + *-------------------------------------------------------------------*/ + mtdcr(EBC0_CFGADDR, EBC0_CFG); + reg = mfdcr(EBC0_CFGDATA); + mtdcr(EBC0_CFGDATA, reg | 0x04000000); /* Set ATC */ + + /*-------------------------------------------------------------------- + * Setup pin multiplexing (GPIO/IRQ...) + *-------------------------------------------------------------------*/ + mtdcr(CPC0_GPIO, 0x03F01F80); + + out32(GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32(GPIO0_TCR, CONFIG_SYS_GPIO_RDY | CONFIG_SYS_EREADY_IO | CONFIG_SYS_LED_RED | CONFIG_SYS_LED_GREEN); + out32(GPIO0_OR, CONFIG_SYS_GPIO_RDY); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + mtdcr(UIC0ER, 0x00000000); /* disable all */ + mtdcr(UIC0CR, 0x00000001); /* UIC1 crit is critical */ + mtdcr(UIC0PR, 0xfffffe13); /* per ref-board manual */ + mtdcr(UIC0TR, 0x01c00008); /* per ref-board manual */ + mtdcr(UIC0VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC0SR, 0xffffffff); /* clear all */ + + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + mtdcr(UIC1ER, 0x00000000); /* disable all */ + mtdcr(UIC1CR, 0x00000000); /* all non-critical */ + mtdcr(UIC1PR, 0xffffe0ff); /* per ref-board manual */ + mtdcr(UIC1TR, 0x00ffc000); /* per ref-board manual */ + mtdcr(UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr(UIC1SR, 0xffffffff); /* clear all */ + + return 0; +} + +int checkboard(void) +{ + char buf[64]; + int i = getenv_f("serial#", buf, sizeof(buf)); + + printf("Board: P3P440"); + if (i > 0) { + puts(", serial# "); + puts(buf); + } + + if (is_monarch()) { + puts(", Monarch"); + } else { + puts(", None-Monarch"); + } + + putc('\n'); + + return (0); +} + +int misc_init_r (void) +{ + /* + * Adjust flash start and offset to detected values + */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + + /* + * Check if only one FLASH bank is available + */ + if (gd->bd->bi_flashsize != CONFIG_SYS_MAX_FLASH_BANKS * (0 - CONFIG_SYS_FLASH0)) { + mtebc(PB1CR, 0); /* disable cs */ + mtebc(PB1AP, 0); + mtebc(PB2CR, 0); /* disable cs */ + mtebc(PB2AP, 0); + mtebc(PB3CR, 0); /* disable cs */ + mtebc(PB3AP, 0); + } + + return 0; +} + +/************************************************************************* + * Override weak is_pci_host() + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + if (is_monarch()) { + wait_for_pci_ready(); + return 1; /* return 1 for host controller */ + } else { + return 0; /* return 0 for adapter controller */ + } +} +#endif /* defined(CONFIG_PCI) */ |