diff options
Diffstat (limited to 'roms/u-boot/board/matrix_vision/mergerbox/README')
| -rw-r--r-- | roms/u-boot/board/matrix_vision/mergerbox/README | 59 |
1 files changed, 59 insertions, 0 deletions
diff --git a/roms/u-boot/board/matrix_vision/mergerbox/README b/roms/u-boot/board/matrix_vision/mergerbox/README new file mode 100644 index 00000000..1994b65b --- /dev/null +++ b/roms/u-boot/board/matrix_vision/mergerbox/README @@ -0,0 +1,59 @@ +Matrix Vision MergerBox +----------------------- + +1. Board Description + + The MergerBox is a 120x160mm single board computing platform + for 3D Full-HD digital video processing. + + Power Supply is 10-32VDC. + +2 System Components + +2.1 CPU + Freescale MPC8377 CPU running at 800MHz core and 333MHz csb. + 256 MByte DDR-II memory @ 333MHz data rate. + 64 MByte Nor Flash on local bus. + 1 GByte Nand Flash on FCM. + 1 Vitesse VSC8601 RGMII ethernet Phys. + 1 USB host controller over ULPI I/F with 4-Port hub. + 2 serial ports. Console running on ttyS0 @ 115200 8N1. + 1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt. + 2 PCIe x1 busses on local mPCIe and cutom expansion connector. + 2 SATA host ports. + System configuration (HRCW) is taken from I2C EEPROM. + +2.2 Graphics + SM107 emebedded video controller driving a 5" 800x480 TFT panel. + Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory. + +2.3 FPGA + Altera Cyclone-IV EP4C115 with several PCI DMA engines. + Connects to 7x Gennum 3G-SDI transceivers as video interconnect + as well as a HDMI v1.4 compliant output for 3D monitoring. + Utilizes two more DDR-II controllers providing 256MB memory. + +2.4 I2C + Bus1: + AD7418 @ 0x50 for voltage/temp. monitoring. + SX8650 @ 0x90 touch controller for HMI. + EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics. + Bus2: + mPCIe SMBus + SiI9022A @ 0x72/0xC0 HDMI transmitter. + TCA6416A @ 0x40 + 0x42 16-Bit I/O expander. + LMH1983 @ 0xCA video PLL. + DS1338C @ 0xD0 real-time clock with embedded crystal. + 9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock. + +3 Flash layout. + + reset vector is 0x00000100, i.e. low boot. + + 00000000 u-boot binary. + 00100000 FPGA raw bit file. + 00300000 FIT image holding kernel, dtb and rescue squashfs. + 03d00000 u-boot environment. + 03e00000 splash image + + mtd partitions are propagated to linux kernel via device tree blob. |