diff options
Diffstat (limited to 'roms/u-boot/arch/arm/imx-common/i2c-mxv7.c')
-rw-r--r-- | roms/u-boot/arch/arm/imx-common/i2c-mxv7.c | 83 |
1 files changed, 83 insertions, 0 deletions
diff --git a/roms/u-boot/arch/arm/imx-common/i2c-mxv7.c b/roms/u-boot/arch/arm/imx-common/i2c-mxv7.c new file mode 100644 index 00000000..a5808739 --- /dev/null +++ b/roms/u-boot/arch/arm/imx-common/i2c-mxv7.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012 Boundary Devices Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/mxc_i2c.h> +#include <watchdog.h> + +static int force_idle_bus(void *priv) +{ + int i; + int sda, scl; + ulong elapsed, start_time; + struct i2c_pads_info *p = (struct i2c_pads_info *)priv; + int ret = 0; + + gpio_direction_input(p->sda.gp); + gpio_direction_input(p->scl.gp); + + imx_iomux_v3_setup_pad(p->sda.gpio_mode); + imx_iomux_v3_setup_pad(p->scl.gpio_mode); + + sda = gpio_get_value(p->sda.gp); + scl = gpio_get_value(p->scl.gp); + if ((sda & scl) == 1) + goto exit; /* Bus is idle already */ + + printf("%s: sda=%d scl=%d sda.gp=0x%x scl.gp=0x%x\n", __func__, + sda, scl, p->sda.gp, p->scl.gp); + /* Send high and low on the SCL line */ + for (i = 0; i < 9; i++) { + gpio_direction_output(p->scl.gp, 0); + udelay(50); + gpio_direction_input(p->scl.gp); + udelay(50); + } + start_time = get_timer(0); + for (;;) { + sda = gpio_get_value(p->sda.gp); + scl = gpio_get_value(p->scl.gp); + if ((sda & scl) == 1) + break; + WATCHDOG_RESET(); + elapsed = get_timer(start_time); + if (elapsed > (CONFIG_SYS_HZ / 5)) { /* .2 seconds */ + ret = -EBUSY; + printf("%s: failed to clear bus, sda=%d scl=%d\n", + __func__, sda, scl); + break; + } + } +exit: + imx_iomux_v3_setup_pad(p->sda.i2c_mode); + imx_iomux_v3_setup_pad(p->scl.i2c_mode); + return ret; +} + +static void * const i2c_bases[] = { + (void *)I2C1_BASE_ADDR, + (void *)I2C2_BASE_ADDR, +#ifdef I2C3_BASE_ADDR + (void *)I2C3_BASE_ADDR, +#endif +}; + +/* i2c_index can be from 0 - 2 */ +void setup_i2c(unsigned i2c_index, int speed, int slave_addr, + struct i2c_pads_info *p) +{ + if (i2c_index >= ARRAY_SIZE(i2c_bases)) + return; + /* Enable i2c clock */ + enable_i2c_clk(1, i2c_index); + /* Make sure bus is idle */ + force_idle_bus(p); + bus_i2c_init(i2c_bases[i2c_index], speed, slave_addr, + force_idle_bus, p); +} |