Initial import of qemu-2.4.1HEADmaster

10 files changed, 2870 insertions, 0 deletions

diff --git a/roms/u-boot/drivers/sound/Makefile b/roms/u-boot/drivers/sound/Makefile
new file mode 100644
index 00000000..981ed614
--- /dev/null
+++ b/roms/u-boot/drivers/sound/Makefile
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2012 Samsung Electronics
+# R. Chandrasekar <rcsekar@samsung.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-$(CONFIG_SOUND)	+= sound.o
+obj-$(CONFIG_I2S)	+= sound-i2s.o
+obj-$(CONFIG_I2S_SAMSUNG)	+= samsung-i2s.o
+obj-$(CONFIG_SOUND_SANDBOX)	+= sandbox.o
+obj-$(CONFIG_SOUND_WM8994)	+= wm8994.o
+obj-$(CONFIG_SOUND_MAX98095)	+= max98095.o
diff --git a/roms/u-boot/drivers/sound/max98095.c b/roms/u-boot/drivers/sound/max98095.c
new file mode 100644
index 00000000..febf4195
--- /dev/null
+++ b/roms/u-boot/drivers/sound/max98095.c
@@ -0,0 +1,591 @@
+/*
+ * max98095.c -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * Modified for uboot by R. Chandrasekar (rcsekar@samsung.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/power.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <sound.h>
+#include "i2s.h"
+#include "max98095.h"
+
+enum max98095_type {
+	MAX98095,
+};
+
+struct max98095_priv {
+	enum max98095_type devtype;
+	unsigned int sysclk;
+	unsigned int rate;
+	unsigned int fmt;
+};
+
+static struct sound_codec_info g_codec_info;
+struct max98095_priv g_max98095_info;
+unsigned int g_max98095_i2c_dev_addr;
+
+/* Index 0 is reserved. */
+int rate_table[] = {0, 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000,
+		88200, 96000};
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg	reg number to be write
+ * @param data	data to be writen to the above registor
+ *
+ * @return	int value 1 for change, 0 for no change or negative error code.
+ */
+static int max98095_i2c_write(unsigned int reg, unsigned char data)
+{
+	debug("%s: Write Addr : 0x%02X, Data :  0x%02X\n",
+	      __func__, reg, data);
+	return i2c_write(g_max98095_i2c_dev_addr, reg, 1, &data, 1);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg	reg number to be read
+ * @param data	address of read data to be stored
+ *
+ * @return	int value 0 for success, -1 in case of error.
+ */
+static unsigned int max98095_i2c_read(unsigned int reg, unsigned char *data)
+{
+	int ret;
+
+	ret = i2c_read(g_max98095_i2c_dev_addr, reg, 1, data, 1);
+	if (ret != 0) {
+		debug("%s: Error while reading register %#04x\n",
+		      __func__, reg);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg	codec register
+ * @param mask	register mask
+ * @param value	new value
+ *
+ * @return int value 0 for success, non-zero error code.
+ */
+static int max98095_update_bits(unsigned int reg, unsigned char mask,
+				unsigned char value)
+{
+	int change, ret = 0;
+	unsigned char old, new;
+
+	if (max98095_i2c_read(reg, &old) != 0)
+		return -1;
+	new = (old & ~mask) | (value & mask);
+	change  = (old != new) ? 1 : 0;
+	if (change)
+		ret = max98095_i2c_write(reg, new);
+	if (ret < 0)
+		return ret;
+
+	return change;
+}
+
+/*
+ * codec mclk clock divider coefficients based on sampling rate
+ *
+ * @param rate sampling rate
+ * @param value address of indexvalue to be stored
+ *
+ * @return	0 for success or negative error code.
+ */
+static int rate_value(int rate, u8 *value)
+{
+	int i;
+
+	for (i = 1; i < ARRAY_SIZE(rate_table); i++) {
+		if (rate_table[i] >= rate) {
+			*value = i;
+			return 0;
+		}
+	}
+	*value = 1;
+
+	return -1;
+}
+
+/*
+ * Sets hw params for max98095
+ *
+ * @param max98095	max98095 information pointer
+ * @param rate		Sampling rate
+ * @param bits_per_sample	Bits per sample
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int max98095_hw_params(struct max98095_priv *max98095,
+			      enum en_max_audio_interface aif_id,
+			      unsigned int rate, unsigned int bits_per_sample)
+{
+	u8 regval;
+	int error;
+	unsigned short M98095_DAI_CLKMODE;
+	unsigned short M98095_DAI_FORMAT;
+	unsigned short M98095_DAI_FILTERS;
+
+	if (aif_id == AIF1) {
+		M98095_DAI_CLKMODE = M98095_027_DAI1_CLKMODE;
+		M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT;
+		M98095_DAI_FILTERS = M98095_02E_DAI1_FILTERS;
+	} else {
+		M98095_DAI_CLKMODE = M98095_031_DAI2_CLKMODE;
+		M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT;
+		M98095_DAI_FILTERS = M98095_038_DAI2_FILTERS;
+	}
+
+	switch (bits_per_sample) {
+	case 16:
+		error = max98095_update_bits(M98095_DAI_FORMAT,
+					     M98095_DAI_WS, 0);
+		break;
+	case 24:
+		error = max98095_update_bits(M98095_DAI_FORMAT,
+					     M98095_DAI_WS, M98095_DAI_WS);
+		break;
+	default:
+		debug("%s: Illegal bits per sample %d.\n",
+		      __func__, bits_per_sample);
+		return -1;
+	}
+
+	if (rate_value(rate, &regval)) {
+		debug("%s: Failed to set sample rate to %d.\n",
+		      __func__, rate);
+		return -1;
+	}
+	max98095->rate = rate;
+
+	error |= max98095_update_bits(M98095_DAI_CLKMODE,
+				      M98095_CLKMODE_MASK, regval);
+
+	/* Update sample rate mode */
+	if (rate < 50000)
+		error |= max98095_update_bits(M98095_DAI_FILTERS,
+					      M98095_DAI_DHF, 0);
+	else
+		error |= max98095_update_bits(M98095_DAI_FILTERS,
+					      M98095_DAI_DHF, M98095_DAI_DHF);
+
+	if (error < 0) {
+		debug("%s: Error setting hardware params.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface system clock for the given frequency
+ *
+ * @param max98095	max98095 information
+ * @param freq		Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_set_sysclk(struct max98095_priv *max98095,
+			       unsigned int freq)
+{
+	int error = 0;
+
+	/* Requested clock frequency is already setup */
+	if (freq == max98095->sysclk)
+		return 0;
+
+	/* Setup clocks for slave mode, and using the PLL
+	 * PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
+	 *	0x02 (when master clk is 20MHz to 40MHz)..
+	 *	0x03 (when master clk is 40MHz to 60MHz)..
+	 */
+	if ((freq >= 10000000) && (freq < 20000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x10);
+	} else if ((freq >= 20000000) && (freq < 40000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x20);
+	} else if ((freq >= 40000000) && (freq < 60000000)) {
+		error = max98095_i2c_write(M98095_026_SYS_CLK, 0x30);
+	} else {
+		debug("%s: Invalid master clock frequency\n", __func__);
+		return -1;
+	}
+
+	debug("%s: Clock at %uHz\n", __func__, freq);
+
+	if (error < 0)
+		return -1;
+
+	max98095->sysclk = freq;
+	return 0;
+}
+
+/*
+ * Sets Max98095 I2S format
+ *
+ * @param max98095	max98095 information
+ * @param fmt		i2S format - supports a subset of the options defined
+ *			in i2s.h.
+ *
+ * @return -1 for error and 0  Success.
+ */
+static int max98095_set_fmt(struct max98095_priv *max98095, int fmt,
+			    enum en_max_audio_interface aif_id)
+{
+	u8 regval = 0;
+	int error = 0;
+	unsigned short M98095_DAI_CLKCFG_HI;
+	unsigned short M98095_DAI_CLKCFG_LO;
+	unsigned short M98095_DAI_FORMAT;
+	unsigned short M98095_DAI_CLOCK;
+
+	if (fmt == max98095->fmt)
+		return 0;
+
+	max98095->fmt = fmt;
+
+	if (aif_id == AIF1) {
+		M98095_DAI_CLKCFG_HI = M98095_028_DAI1_CLKCFG_HI;
+		M98095_DAI_CLKCFG_LO = M98095_029_DAI1_CLKCFG_LO;
+		M98095_DAI_FORMAT = M98095_02A_DAI1_FORMAT;
+		M98095_DAI_CLOCK = M98095_02B_DAI1_CLOCK;
+	} else {
+		M98095_DAI_CLKCFG_HI = M98095_032_DAI2_CLKCFG_HI;
+		M98095_DAI_CLKCFG_LO = M98095_033_DAI2_CLKCFG_LO;
+		M98095_DAI_FORMAT = M98095_034_DAI2_FORMAT;
+		M98095_DAI_CLOCK = M98095_035_DAI2_CLOCK;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		/* Slave mode PLL */
+		error |= max98095_i2c_write(M98095_DAI_CLKCFG_HI,
+					0x80);
+		error |= max98095_i2c_write(M98095_DAI_CLKCFG_LO,
+					0x00);
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Set to master mode */
+		regval |= M98095_DAI_MAS;
+		break;
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBM_CFS:
+	default:
+		debug("%s: Clock mode unsupported\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_I2S:
+		regval |= M98095_DAI_DLY;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		break;
+	default:
+		debug("%s: Unrecognized format.\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		regval |= M98095_DAI_WCI;
+		break;
+	case SND_SOC_DAIFMT_IB_NF:
+		regval |= M98095_DAI_BCI;
+		break;
+	case SND_SOC_DAIFMT_IB_IF:
+		regval |= M98095_DAI_BCI | M98095_DAI_WCI;
+		break;
+	default:
+		debug("%s: Unrecognized inversion settings.\n", __func__);
+		return -1;
+	}
+
+	error |= max98095_update_bits(M98095_DAI_FORMAT,
+				      M98095_DAI_MAS | M98095_DAI_DLY |
+				      M98095_DAI_BCI | M98095_DAI_WCI,
+				      regval);
+
+	error |= max98095_i2c_write(M98095_DAI_CLOCK,
+				    M98095_DAI_BSEL64);
+
+	if (error < 0) {
+		debug("%s: Error setting i2s format.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * resets the audio codec
+ *
+ * @return -1 for error and 0 success.
+ */
+static int max98095_reset(void)
+{
+	int i, ret;
+
+	/*
+	 * Gracefully reset the DSP core and the codec hardware in a proper
+	 * sequence.
+	 */
+	ret = max98095_i2c_write(M98095_00F_HOST_CFG, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset DSP: %d\n", __func__, ret);
+		return ret;
+	}
+
+	ret = max98095_i2c_write(M98095_097_PWR_SYS, 0);
+	if (ret != 0) {
+		debug("%s: Failed to reset codec: %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Reset to hardware default for registers, as there is not a soft
+	 * reset hardware control register.
+	 */
+	for (i = M98095_010_HOST_INT_CFG; i < M98095_REG_MAX_CACHED; i++) {
+		ret = max98095_i2c_write(i, 0);
+		if (ret < 0) {
+			debug("%s: Failed to reset: %d\n", __func__, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * Intialise max98095 codec device
+ *
+ * @param max98095	max98095 information
+ *
+ * @returns -1 for error  and 0 Success.
+ */
+static int max98095_device_init(struct max98095_priv *max98095,
+				enum en_max_audio_interface aif_id)
+{
+	unsigned char id;
+	int error = 0;
+
+	/* reset the codec, the DSP core, and disable all interrupts */
+	error = max98095_reset();
+	if (error != 0) {
+		debug("Reset\n");
+		return error;
+	}
+
+	/* initialize private data */
+	max98095->sysclk = -1U;
+	max98095->rate = -1U;
+	max98095->fmt = -1U;
+
+	error = max98095_i2c_read(M98095_0FF_REV_ID, &id);
+	if (error < 0) {
+		debug("%s: Failure reading hardware revision: %d\n",
+		      __func__, id);
+		goto err_access;
+	}
+	debug("%s: Hardware revision: %c\n", __func__, (id - 0x40) + 'A');
+
+	error |= max98095_i2c_write(M98095_097_PWR_SYS, M98095_PWRSV);
+
+	/*
+	 * initialize registers to hardware default configuring audio
+	 * interface2 to DAC
+	 */
+	if (aif_id == AIF1)
+		error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
+					    M98095_DAI1L_TO_DACL |
+					    M98095_DAI1R_TO_DACR);
+	else
+		error |= max98095_i2c_write(M98095_048_MIX_DAC_LR,
+					    M98095_DAI2M_TO_DACL |
+					    M98095_DAI2M_TO_DACR);
+
+	error |= max98095_i2c_write(M98095_092_PWR_EN_OUT,
+				    M98095_SPK_SPREADSPECTRUM);
+	error |= max98095_i2c_write(M98095_04E_CFG_HP, M98095_HPNORMAL);
+	if (aif_id == AIF1)
+		error |= max98095_i2c_write(M98095_02C_DAI1_IOCFG,
+					    M98095_S1NORMAL | M98095_SDATA);
+	else
+		error |= max98095_i2c_write(M98095_036_DAI2_IOCFG,
+					    M98095_S2NORMAL | M98095_SDATA);
+
+	/* take the codec out of the shut down */
+	error |= max98095_update_bits(M98095_097_PWR_SYS, M98095_SHDNRUN,
+				      M98095_SHDNRUN);
+	/* route DACL and DACR output to HO and Spekers */
+	error |= max98095_i2c_write(M98095_050_MIX_SPK_LEFT, 0x01); /* DACL */
+	error |= max98095_i2c_write(M98095_051_MIX_SPK_RIGHT, 0x01);/* DACR */
+	error |= max98095_i2c_write(M98095_04C_MIX_HP_LEFT, 0x01);  /* DACL */
+	error |= max98095_i2c_write(M98095_04D_MIX_HP_RIGHT, 0x01); /* DACR */
+
+	/* power Enable */
+	error |= max98095_i2c_write(M98095_091_PWR_EN_OUT, 0xF3);
+
+	/* set Volume */
+	error |= max98095_i2c_write(M98095_064_LVL_HP_L, 15);
+	error |= max98095_i2c_write(M98095_065_LVL_HP_R, 15);
+	error |= max98095_i2c_write(M98095_067_LVL_SPK_L, 16);
+	error |= max98095_i2c_write(M98095_068_LVL_SPK_R, 16);
+
+	/* Enable DAIs */
+	error |= max98095_i2c_write(M98095_093_BIAS_CTRL, 0x30);
+	if (aif_id == AIF1)
+		error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x01);
+	else
+		error |= max98095_i2c_write(M98095_096_PWR_DAC_CK, 0x07);
+
+err_access:
+	if (error < 0)
+		return -1;
+
+	return 0;
+}
+
+static int max98095_do_init(struct sound_codec_info *pcodec_info,
+			    enum en_max_audio_interface aif_id,
+			    int sampling_rate, int mclk_freq,
+			    int bits_per_sample)
+{
+	int ret = 0;
+
+	/* Enable codec clock */
+	set_xclkout();
+
+	/* shift the device address by 1 for 7 bit addressing */
+	g_max98095_i2c_dev_addr = pcodec_info->i2c_dev_addr >> 1;
+
+	if (pcodec_info->codec_type == CODEC_MAX_98095) {
+		g_max98095_info.devtype = MAX98095;
+	} else {
+		debug("%s: Codec id [%d] not defined\n", __func__,
+		      pcodec_info->codec_type);
+		return -1;
+	}
+
+	ret = max98095_device_init(&g_max98095_info, aif_id);
+	if (ret < 0) {
+		debug("%s: max98095 codec chip init failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_set_sysclk(&g_max98095_info, mclk_freq);
+	if (ret < 0) {
+		debug("%s: max98095 codec set sys clock failed\n", __func__);
+		return ret;
+	}
+
+	ret = max98095_hw_params(&g_max98095_info, aif_id, sampling_rate,
+				 bits_per_sample);
+
+	if (ret == 0) {
+		ret = max98095_set_fmt(&g_max98095_info,
+				       SND_SOC_DAIFMT_I2S |
+				       SND_SOC_DAIFMT_NB_NF |
+				       SND_SOC_DAIFMT_CBS_CFS,
+				       aif_id);
+	}
+
+	return ret;
+}
+
+static int get_max98095_codec_values(struct sound_codec_info *pcodec_info,
+				const void *blob)
+{
+	int error = 0;
+#ifdef CONFIG_OF_CONTROL
+	enum fdt_compat_id compat;
+	int node;
+	int parent;
+
+	/* Get the node from FDT for codec */
+	node = fdtdec_next_compatible(blob, 0, COMPAT_MAXIM_98095_CODEC);
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for codec in device tree\n");
+		debug("node = %d\n", node);
+		return -1;
+	}
+
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -1;
+	}
+
+	compat = fdtdec_lookup(blob, parent);
+	switch (compat) {
+	case COMPAT_SAMSUNG_S3C2440_I2C:
+		pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+		error |= pcodec_info->i2c_bus;
+		debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+		pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+							"reg", 0);
+		error |= pcodec_info->i2c_dev_addr;
+		debug("i2c dev addr = %x\n", pcodec_info->i2c_dev_addr);
+		break;
+	default:
+		debug("%s: Unknown compat id %d\n", __func__, compat);
+		return -1;
+	}
+#else
+	pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+	pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+	debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+	pcodec_info->codec_type = CODEC_MAX_98095;
+	if (error == -1) {
+		debug("fail to get max98095 codec node properties\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/* max98095 Device Initialisation */
+int max98095_init(const void *blob, enum en_max_audio_interface aif_id,
+		  int sampling_rate, int mclk_freq,
+		  int bits_per_sample)
+{
+	int ret;
+	int old_bus = i2c_get_bus_num();
+	struct sound_codec_info *pcodec_info = &g_codec_info;
+
+	if (get_max98095_codec_values(pcodec_info, blob) < 0) {
+		debug("FDT Codec values failed\n");
+		return -1;
+	}
+
+	i2c_set_bus_num(pcodec_info->i2c_bus);
+	ret = max98095_do_init(pcodec_info, aif_id, sampling_rate, mclk_freq,
+			       bits_per_sample);
+	i2c_set_bus_num(old_bus);
+
+	return ret;
+}
diff --git a/roms/u-boot/drivers/sound/max98095.h b/roms/u-boot/drivers/sound/max98095.h
new file mode 100644
index 00000000..44b1e3a9
--- /dev/null
+++ b/roms/u-boot/drivers/sound/max98095.h
@@ -0,0 +1,317 @@
+/*
+ * max98095.h -- MAX98095 ALSA SoC Audio driver
+ *
+ * Copyright 2011 Maxim Integrated Products
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MAX98095_H
+#define _MAX98095_H
+
+/*  Available audio interface ports in wm8994 codec */
+enum en_max_audio_interface {
+	AIF1 = 1,
+	AIF2,
+};
+
+/*
+ * MAX98095 Registers Definition
+ */
+
+#define M98095_000_HOST_DATA		0x00
+#define M98095_001_HOST_INT_STS		0x01
+#define M98095_002_HOST_RSP_STS		0x02
+#define M98095_003_HOST_CMD_STS		0x03
+#define M98095_004_CODEC_STS		0x04
+#define M98095_005_DAI1_ALC_STS		0x05
+#define M98095_006_DAI2_ALC_STS		0x06
+#define M98095_007_JACK_AUTO_STS	0x07
+#define M98095_008_JACK_MANUAL_STS	0x08
+#define M98095_009_JACK_VBAT_STS	0x09
+#define M98095_00A_ACC_ADC_STS		0x0A
+#define M98095_00B_MIC_NG_AGC_STS	0x0B
+#define M98095_00C_SPK_L_VOLT_STS	0x0C
+#define M98095_00D_SPK_R_VOLT_STS	0x0D
+#define M98095_00E_TEMP_SENSOR_STS	0x0E
+#define M98095_00F_HOST_CFG		0x0F
+#define M98095_010_HOST_INT_CFG		0x10
+#define M98095_011_HOST_INT_EN		0x11
+#define M98095_012_CODEC_INT_EN		0x12
+#define M98095_013_JACK_INT_EN		0x13
+#define M98095_014_JACK_INT_EN		0x14
+#define M98095_015_DEC			0x15
+#define M98095_016_RESERVED		0x16
+#define M98095_017_RESERVED		0x17
+#define M98095_018_KEYCODE3		0x18
+#define M98095_019_KEYCODE2		0x19
+#define M98095_01A_KEYCODE1		0x1A
+#define M98095_01B_KEYCODE0		0x1B
+#define M98095_01C_OEMCODE1		0x1C
+#define M98095_01D_OEMCODE0		0x1D
+#define M98095_01E_XCFG1		0x1E
+#define M98095_01F_XCFG2		0x1F
+#define M98095_020_XCFG3		0x20
+#define M98095_021_XCFG4		0x21
+#define M98095_022_XCFG5		0x22
+#define M98095_023_XCFG6		0x23
+#define M98095_024_XGPIO		0x24
+#define M98095_025_XCLKCFG		0x25
+#define M98095_026_SYS_CLK		0x26
+#define M98095_027_DAI1_CLKMODE		0x27
+#define M98095_028_DAI1_CLKCFG_HI	0x28
+#define M98095_029_DAI1_CLKCFG_LO	0x29
+#define M98095_02A_DAI1_FORMAT		0x2A
+#define M98095_02B_DAI1_CLOCK		0x2B
+#define M98095_02C_DAI1_IOCFG		0x2C
+#define M98095_02D_DAI1_TDM		0x2D
+#define M98095_02E_DAI1_FILTERS		0x2E
+#define M98095_02F_DAI1_LVL1		0x2F
+#define M98095_030_DAI1_LVL2		0x30
+#define M98095_031_DAI2_CLKMODE		0x31
+#define M98095_032_DAI2_CLKCFG_HI	0x32
+#define M98095_033_DAI2_CLKCFG_LO	0x33
+#define M98095_034_DAI2_FORMAT		0x34
+#define M98095_035_DAI2_CLOCK		0x35
+#define M98095_036_DAI2_IOCFG		0x36
+#define M98095_037_DAI2_TDM		0x37
+#define M98095_038_DAI2_FILTERS		0x38
+#define M98095_039_DAI2_LVL1		0x39
+#define M98095_03A_DAI2_LVL2		0x3A
+#define M98095_03B_DAI3_CLKMODE		0x3B
+#define M98095_03C_DAI3_CLKCFG_HI	0x3C
+#define M98095_03D_DAI3_CLKCFG_LO	0x3D
+#define M98095_03E_DAI3_FORMAT		0x3E
+#define M98095_03F_DAI3_CLOCK		0x3F
+#define M98095_040_DAI3_IOCFG		0x40
+#define M98095_041_DAI3_TDM		0x41
+#define M98095_042_DAI3_FILTERS		0x42
+#define M98095_043_DAI3_LVL1		0x43
+#define M98095_044_DAI3_LVL2		0x44
+#define M98095_045_CFG_DSP		0x45
+#define M98095_046_DAC_CTRL1		0x46
+#define M98095_047_DAC_CTRL2		0x47
+#define M98095_048_MIX_DAC_LR		0x48
+#define M98095_049_MIX_DAC_M		0x49
+#define M98095_04A_MIX_ADC_LEFT		0x4A
+#define M98095_04B_MIX_ADC_RIGHT	0x4B
+#define M98095_04C_MIX_HP_LEFT		0x4C
+#define M98095_04D_MIX_HP_RIGHT		0x4D
+#define M98095_04E_CFG_HP		0x4E
+#define M98095_04F_MIX_RCV		0x4F
+#define M98095_050_MIX_SPK_LEFT		0x50
+#define M98095_051_MIX_SPK_RIGHT	0x51
+#define M98095_052_MIX_SPK_CFG		0x52
+#define M98095_053_MIX_LINEOUT1		0x53
+#define M98095_054_MIX_LINEOUT2		0x54
+#define M98095_055_MIX_LINEOUT_CFG	0x55
+#define M98095_056_LVL_SIDETONE_DAI12	0x56
+#define M98095_057_LVL_SIDETONE_DAI3	0x57
+#define M98095_058_LVL_DAI1_PLAY	0x58
+#define M98095_059_LVL_DAI1_EQ		0x59
+#define M98095_05A_LVL_DAI2_PLAY	0x5A
+#define M98095_05B_LVL_DAI2_EQ		0x5B
+#define M98095_05C_LVL_DAI3_PLAY	0x5C
+#define M98095_05D_LVL_ADC_L		0x5D
+#define M98095_05E_LVL_ADC_R		0x5E
+#define M98095_05F_LVL_MIC1		0x5F
+#define M98095_060_LVL_MIC2		0x60
+#define M98095_061_LVL_LINEIN		0x61
+#define M98095_062_LVL_LINEOUT1		0x62
+#define M98095_063_LVL_LINEOUT2		0x63
+#define M98095_064_LVL_HP_L		0x64
+#define M98095_065_LVL_HP_R		0x65
+#define M98095_066_LVL_RCV		0x66
+#define M98095_067_LVL_SPK_L		0x67
+#define M98095_068_LVL_SPK_R		0x68
+#define M98095_069_MICAGC_CFG		0x69
+#define M98095_06A_MICAGC_THRESH	0x6A
+#define M98095_06B_SPK_NOISEGATE	0x6B
+#define M98095_06C_DAI1_ALC1_TIME	0x6C
+#define M98095_06D_DAI1_ALC1_COMP	0x6D
+#define M98095_06E_DAI1_ALC1_EXPN	0x6E
+#define M98095_06F_DAI1_ALC1_GAIN	0x6F
+#define M98095_070_DAI1_ALC2_TIME	0x70
+#define M98095_071_DAI1_ALC2_COMP	0x71
+#define M98095_072_DAI1_ALC2_EXPN	0x72
+#define M98095_073_DAI1_ALC2_GAIN	0x73
+#define M98095_074_DAI1_ALC3_TIME	0x74
+#define M98095_075_DAI1_ALC3_COMP	0x75
+#define M98095_076_DAI1_ALC3_EXPN	0x76
+#define M98095_077_DAI1_ALC3_GAIN	0x77
+#define M98095_078_DAI2_ALC1_TIME	0x78
+#define M98095_079_DAI2_ALC1_COMP	0x79
+#define M98095_07A_DAI2_ALC1_EXPN	0x7A
+#define M98095_07B_DAI2_ALC1_GAIN	0x7B
+#define M98095_07C_DAI2_ALC2_TIME	0x7C
+#define M98095_07D_DAI2_ALC2_COMP	0x7D
+#define M98095_07E_DAI2_ALC2_EXPN	0x7E
+#define M98095_07F_DAI2_ALC2_GAIN	0x7F
+#define M98095_080_DAI2_ALC3_TIME	0x80
+#define M98095_081_DAI2_ALC3_COMP	0x81
+#define M98095_082_DAI2_ALC3_EXPN	0x82
+#define M98095_083_DAI2_ALC3_GAIN	0x83
+#define M98095_084_HP_NOISE_GATE	0x84
+#define M98095_085_AUX_ADC		0x85
+#define M98095_086_CFG_LINE		0x86
+#define M98095_087_CFG_MIC		0x87
+#define M98095_088_CFG_LEVEL		0x88
+#define M98095_089_JACK_DET_AUTO	0x89
+#define M98095_08A_JACK_DET_MANUAL	0x8A
+#define M98095_08B_JACK_KEYSCAN_DBC	0x8B
+#define M98095_08C_JACK_KEYSCAN_DLY	0x8C
+#define M98095_08D_JACK_KEY_THRESH	0x8D
+#define M98095_08E_JACK_DC_SLEW		0x8E
+#define M98095_08F_JACK_TEST_CFG	0x8F
+#define M98095_090_PWR_EN_IN		0x90
+#define M98095_091_PWR_EN_OUT		0x91
+#define M98095_092_PWR_EN_OUT		0x92
+#define M98095_093_BIAS_CTRL		0x93
+#define M98095_094_PWR_DAC_21		0x94
+#define M98095_095_PWR_DAC_03		0x95
+#define M98095_096_PWR_DAC_CK		0x96
+#define M98095_097_PWR_SYS		0x97
+
+#define M98095_0FF_REV_ID		0xFF
+
+#define M98095_REG_CNT			(0xFF+1)
+#define M98095_REG_MAX_CACHED		0X97
+
+/* MAX98095 Registers Bit Fields */
+
+/* M98095_00F_HOST_CFG */
+#define M98095_SEG			(1<<0)
+#define M98095_XTEN			(1<<1)
+#define M98095_MDLLEN			(1<<2)
+
+/* M98095_027_DAI1_CLKMODE, M98095_031_DAI2_CLKMODE, M98095_03B_DAI3_CLKMODE */
+#define M98095_CLKMODE_MASK		0xFF
+
+/* M98095_02A_DAI1_FORMAT, M98095_034_DAI2_FORMAT, M98095_03E_DAI3_FORMAT */
+#define M98095_DAI_MAS			(1<<7)
+#define M98095_DAI_WCI			(1<<6)
+#define M98095_DAI_BCI			(1<<5)
+#define M98095_DAI_DLY			(1<<4)
+#define M98095_DAI_TDM			(1<<2)
+#define M98095_DAI_FSW			(1<<1)
+#define M98095_DAI_WS			(1<<0)
+
+/* M98095_02B_DAI1_CLOCK, M98095_035_DAI2_CLOCK, M98095_03F_DAI3_CLOCK */
+#define M98095_DAI_BSEL64		(1<<0)
+#define M98095_DAI_DOSR_DIV2		(0<<5)
+#define M98095_DAI_DOSR_DIV4		(1<<5)
+
+/* M98095_02C_DAI1_IOCFG, M98095_036_DAI2_IOCFG, M98095_040_DAI3_IOCFG */
+#define M98095_S1NORMAL			(1<<6)
+#define M98095_S2NORMAL			(2<<6)
+#define M98095_S3NORMAL			(3<<6)
+#define M98095_SDATA			(3<<0)
+
+/* M98095_02E_DAI1_FILTERS, M98095_038_DAI2_FILTERS, M98095_042_DAI3_FILTERS */
+#define M98095_DAI_DHF			(1<<3)
+
+/* M98095_045_DSP_CFG */
+#define M98095_DSPNORMAL		(5<<4)
+
+/* M98095_048_MIX_DAC_LR */
+#define M98095_DAI1L_TO_DACR		(1<<7)
+#define M98095_DAI1R_TO_DACR		(1<<6)
+#define M98095_DAI2M_TO_DACR		(1<<5)
+#define M98095_DAI1L_TO_DACL		(1<<3)
+#define M98095_DAI1R_TO_DACL		(1<<2)
+#define M98095_DAI2M_TO_DACL		(1<<1)
+#define M98095_DAI3M_TO_DACL		(1<<0)
+
+/* M98095_049_MIX_DAC_M */
+#define M98095_DAI1L_TO_DACM		(1<<3)
+#define M98095_DAI1R_TO_DACM		(1<<2)
+#define M98095_DAI2M_TO_DACM		(1<<1)
+#define M98095_DAI3M_TO_DACM		(1<<0)
+
+/* M98095_04E_MIX_HP_CFG */
+#define M98095_HPNORMAL			(3<<4)
+
+/* M98095_05F_LVL_MIC1, M98095_060_LVL_MIC2 */
+#define M98095_MICPRE_MASK		(3<<5)
+#define M98095_MICPRE_SHIFT		5
+
+/* M98095_064_LVL_HP_L, M98095_065_LVL_HP_R */
+#define M98095_HP_MUTE			(1<<7)
+
+/* M98095_066_LVL_RCV */
+#define M98095_REC_MUTE			(1<<7)
+
+/* M98095_067_LVL_SPK_L, M98095_068_LVL_SPK_R */
+#define M98095_SP_MUTE			(1<<7)
+
+/* M98095_087_CFG_MIC */
+#define M98095_MICSEL_MASK		(3<<0)
+#define M98095_DIGMIC_L			(1<<2)
+#define M98095_DIGMIC_R			(1<<3)
+#define M98095_DIGMIC2L			(1<<4)
+#define M98095_DIGMIC2R			(1<<5)
+
+/* M98095_088_CFG_LEVEL */
+#define M98095_VSEN			(1<<6)
+#define M98095_ZDEN			(1<<5)
+#define M98095_BQ2EN			(1<<3)
+#define M98095_BQ1EN			(1<<2)
+#define M98095_EQ2EN			(1<<1)
+#define M98095_EQ1EN			(1<<0)
+
+/* M98095_090_PWR_EN_IN */
+#define M98095_INEN			(1<<7)
+#define M98095_MB2EN			(1<<3)
+#define M98095_MB1EN			(1<<2)
+#define M98095_MBEN			(3<<2)
+#define M98095_ADREN			(1<<1)
+#define M98095_ADLEN			(1<<0)
+
+/* M98095_091_PWR_EN_OUT */
+#define M98095_HPLEN			(1<<7)
+#define M98095_HPREN			(1<<6)
+#define M98095_SPLEN			(1<<5)
+#define M98095_SPREN			(1<<4)
+#define M98095_RECEN			(1<<3)
+#define M98095_DALEN			(1<<1)
+#define M98095_DAREN			(1<<0)
+
+/* M98095_092_PWR_EN_OUT */
+#define M98095_SPK_FIXEDSPECTRUM	(0<<4)
+#define M98095_SPK_SPREADSPECTRUM	(1<<4)
+
+/* M98095_097_PWR_SYS */
+#define M98095_SHDNRUN			(1<<7)
+#define M98095_PERFMODE			(1<<3)
+#define M98095_HPPLYBACK		(1<<2)
+#define M98095_PWRSV8K			(1<<1)
+#define M98095_PWRSV			(1<<0)
+
+#define M98095_COEFS_PER_BAND		5
+
+/* Equalizer filter coefficients */
+#define M98095_110_DAI1_EQ_BASE		0x10
+#define M98095_142_DAI2_EQ_BASE		0x42
+
+/* Biquad filter coefficients */
+#define M98095_174_DAI1_BQ_BASE		0x74
+#define M98095_17E_DAI2_BQ_BASE		0x7E
+
+/* function prototype */
+
+/*
+ * intialise max98095 sound codec device for the given configuration
+ *
+ * @param blob			FDT node for codec values
+ * @param sampling_rate		Sampling rate (Hz)
+ * @param mclk_freq		MCLK Frequency (Hz)
+ * @param bits_per_sample	bits per Sample (must be 16 or 24)
+ *
+ * @returns -1 for error and 0 Success.
+ */
+int max98095_init(const void *blob, enum en_max_audio_interface aif_id,
+		  int sampling_rate, int mclk_freq, int bits_per_sample);
+
+#endif
diff --git a/roms/u-boot/drivers/sound/samsung-i2s.c b/roms/u-boot/drivers/sound/samsung-i2s.c
new file mode 100644
index 00000000..47f155f8
--- /dev/null
+++ b/roms/u-boot/drivers/sound/samsung-i2s.c
@@ -0,0 +1,371 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/i2s-regs.h>
+#include <asm/io.h>
+#include <common.h>
+#include <sound.h>
+#include <i2s.h>
+
+#define FIC_TX2COUNT(x)		(((x) >>  24) & 0xf)
+#define FIC_TX1COUNT(x)		(((x) >>  16) & 0xf)
+#define FIC_TXCOUNT(x)		(((x) >>  8) & 0xf)
+#define FIC_RXCOUNT(x)		(((x) >>  0) & 0xf)
+#define FICS_TXCOUNT(x)		(((x) >>  8) & 0x7f)
+
+#define TIMEOUT_I2S_TX		100	/* i2s transfer timeout */
+
+/*
+ * Sets the frame size for I2S LR clock
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param rfs		Frame Size
+ */
+static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	mod &= ~MOD_RCLK_MASK;
+
+	switch (rfs) {
+	case 768:
+		mod |= MOD_RCLK_768FS;
+		break;
+	case 512:
+		mod |= MOD_RCLK_512FS;
+		break;
+	case 384:
+		mod |= MOD_RCLK_384FS;
+		break;
+	default:
+		mod |= MOD_RCLK_256FS;
+		break;
+	}
+
+	writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * Sets the i2s transfer control
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param on		1 enable tx , 0 disable tx transfer
+ */
+static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
+{
+	unsigned int con = readl(&i2s_reg->con);
+	unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
+
+	if (on) {
+		con |= CON_ACTIVE;
+		con &= ~CON_TXCH_PAUSE;
+	} else {
+		con |=  CON_TXCH_PAUSE;
+		con &= ~CON_ACTIVE;
+	}
+
+	writel(mod, &i2s_reg->mod);
+	writel(con, &i2s_reg->con);
+}
+
+/*
+ * set the bit clock frame size (in multiples of LRCLK)
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param bfs		bit Frame Size
+ */
+static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	mod &= ~MOD_BCLK_MASK;
+
+	switch (bfs) {
+	case 48:
+		mod |= MOD_BCLK_48FS;
+		break;
+	case 32:
+		mod |= MOD_BCLK_32FS;
+		break;
+	case 24:
+		mod |= MOD_BCLK_24FS;
+		break;
+	case 16:
+		mod |= MOD_BCLK_16FS;
+		break;
+	default:
+		return;
+	}
+	writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * flushes the i2stx fifo
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param flush		Tx fifo flush command (0x00 - do not flush
+ *				0x80 - flush tx fifo)
+ */
+void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
+{
+	/* Flush the FIFO */
+	setbits_le32(&i2s_reg->fic, flush);
+	clrbits_le32(&i2s_reg->fic, flush);
+}
+
+/*
+ * Set System Clock direction
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param dir		Clock direction
+ *
+ * @return		int value 0 for success, -1 in case of error
+ */
+int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	if (dir == SND_SOC_CLOCK_IN)
+		mod |= MOD_CDCLKCON;
+	else
+		mod &= ~MOD_CDCLKCON;
+
+	writel(mod, &i2s_reg->mod);
+
+	return 0;
+}
+
+/*
+ * Sets I2S Clcok format
+ *
+ * @param fmt		i2s clock properties
+ * @param i2s_reg	i2s regiter address
+ *
+ * @return		int value 0 for success, -1 in case of error
+ */
+int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+	unsigned int tmp = 0;
+	unsigned int ret = 0;
+
+	/* Format is priority */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_MSB;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_LSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		tmp |= MOD_SDF_IIS;
+		break;
+	default:
+		debug("%s: Invalid format priority [0x%x]\n", __func__,
+		      (fmt & SND_SOC_DAIFMT_FORMAT_MASK));
+		return -1;
+	}
+
+	/*
+	 * INV flag is relative to the FORMAT flag - if set it simply
+	 * flips the polarity specified by the Standard
+	 */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		if (tmp & MOD_LR_RLOW)
+			tmp &= ~MOD_LR_RLOW;
+		else
+			tmp |= MOD_LR_RLOW;
+		break;
+	default:
+		debug("%s: Invalid clock ploarity input [0x%x]\n", __func__,
+		      (fmt & SND_SOC_DAIFMT_INV_MASK));
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		tmp |= MOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Set default source clock in Master mode */
+		ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
+		if (ret != 0) {
+			debug("%s:set i2s clock direction failed\n", __func__);
+			return -1;
+		}
+		break;
+	default:
+		debug("%s: Invalid master selection [0x%x]\n", __func__,
+		      (fmt & SND_SOC_DAIFMT_MASTER_MASK));
+		return -1;
+	}
+
+	mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
+	mod |= tmp;
+	writel(mod, &i2s_reg->mod);
+
+	return 0;
+}
+
+/*
+ * Sets the sample width in bits
+ *
+ * @param blc		samplewidth (size of sample in bits)
+ * @param i2s_reg	i2s regiter address
+ *
+ * @return		int value 0 for success, -1 in case of error
+ */
+int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	mod &= ~MOD_BLCP_MASK;
+	mod &= ~MOD_BLC_MASK;
+
+	switch (blc) {
+	case 8:
+		mod |= MOD_BLCP_8BIT;
+		mod |= MOD_BLC_8BIT;
+		break;
+	case 16:
+		mod |= MOD_BLCP_16BIT;
+		mod |= MOD_BLC_16BIT;
+		break;
+	case 24:
+		mod |= MOD_BLCP_24BIT;
+		mod |= MOD_BLC_24BIT;
+		break;
+	default:
+		debug("%s: Invalid sample size input [0x%x]\n",
+		      __func__, blc);
+		return -1;
+	}
+	writel(mod, &i2s_reg->mod);
+
+	return 0;
+}
+
+int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data,
+				unsigned long data_size)
+{
+	int i;
+	int start;
+	struct i2s_reg *i2s_reg =
+				(struct i2s_reg *)pi2s_tx->base_address;
+
+	if (data_size < FIFO_LENGTH) {
+		debug("%s : Invalid data size\n", __func__);
+		return -1; /* invalid pcm data size */
+	}
+
+	/* fill the tx buffer before stating the tx transmit */
+	for (i = 0; i < FIFO_LENGTH; i++)
+		writel(*data++, &i2s_reg->txd);
+
+	data_size -= FIFO_LENGTH;
+	i2s_txctrl(i2s_reg, I2S_TX_ON);
+
+	while (data_size > 0) {
+		start = get_timer(0);
+		if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
+			writel(*data++, &i2s_reg->txd);
+			data_size--;
+		} else {
+			if (get_timer(start) > TIMEOUT_I2S_TX) {
+				i2s_txctrl(i2s_reg, I2S_TX_OFF);
+				debug("%s: I2S Transfer Timeout\n", __func__);
+				return -1;
+			}
+		}
+	}
+	i2s_txctrl(i2s_reg, I2S_TX_OFF);
+
+	return 0;
+}
+
+int i2s_tx_init(struct i2stx_info *pi2s_tx)
+{
+	int ret;
+	struct i2s_reg *i2s_reg =
+				(struct i2s_reg *)pi2s_tx->base_address;
+	if (pi2s_tx->id == 0) {
+		/* Initialize GPIO for I2S-0 */
+		exynos_pinmux_config(PERIPH_ID_I2S0, 0);
+
+		/* Set EPLL Clock */
+		ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4);
+	} else if (pi2s_tx->id == 1) {
+		/* Initialize GPIO for I2S-1 */
+		exynos_pinmux_config(PERIPH_ID_I2S1, 0);
+
+		/* Set EPLL Clock */
+		ret = set_epll_clk(pi2s_tx->audio_pll_clk);
+	} else {
+		debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id);
+		return -1;
+	}
+
+	if (ret != 0) {
+		debug("%s: epll clock set rate failed\n", __func__);
+		return -1;
+	}
+
+	/* Select Clk Source for Audio 0 or 1 */
+	ret = set_i2s_clk_source(pi2s_tx->id);
+	if (ret == -1) {
+		debug("%s: unsupported clock for i2s-%d\n", __func__,
+		      pi2s_tx->id);
+		return -1;
+	}
+
+	if (pi2s_tx->id == 0) {
+		/*Reset the i2s module */
+		writel(CON_RESET, &i2s_reg->con);
+
+		writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod);
+		/* set i2s prescaler */
+		writel(PSREN | PSVAL, &i2s_reg->psr);
+	} else {
+		/* Set Prescaler to get MCLK */
+		ret = set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
+				(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				pi2s_tx->id);
+	}
+	if (ret == -1) {
+		debug("%s: unsupported prescalar for i2s-%d\n", __func__,
+		      pi2s_tx->id);
+		return -1;
+	}
+
+	/* Configure I2s format */
+	ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+			  SND_SOC_DAIFMT_CBM_CFM));
+	if (ret == 0) {
+		i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
+		ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
+		if (ret != 0) {
+			debug("%s:set sample rate failed\n", __func__);
+			return -1;
+		}
+
+		i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
+		/* disable i2s transfer flag and flush the fifo */
+		i2s_txctrl(i2s_reg, I2S_TX_OFF);
+		i2s_fifo(i2s_reg, FIC_TXFLUSH);
+	} else {
+		debug("%s: failed\n", __func__);
+	}
+
+	return ret;
+}
diff --git a/roms/u-boot/drivers/sound/sandbox.c b/roms/u-boot/drivers/sound/sandbox.c
new file mode 100644
index 00000000..fe5c9e9b
--- /dev/null
+++ b/roms/u-boot/drivers/sound/sandbox.c
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2013 Google, Inc
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sound.h>
+#include <asm/sdl.h>
+
+int sound_play(uint32_t msec, uint32_t frequency)
+{
+	sandbox_sdl_sound_start(frequency);
+	mdelay(msec);
+	sandbox_sdl_sound_stop();
+
+	return 0;
+}
+
+int sound_init(const void *blob)
+{
+	return sandbox_sdl_sound_init();
+}
diff --git a/roms/u-boot/drivers/sound/sound-i2s.c b/roms/u-boot/drivers/sound/sound-i2s.c
new file mode 100644
index 00000000..749bbbd0
--- /dev/null
+++ b/roms/u-boot/drivers/sound/sound-i2s.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <malloc.h>
+#include <common.h>
+#include <asm/io.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include <asm/arch/sound.h>
+#include "wm8994.h"
+#include "max98095.h"
+
+/* defines */
+#define SOUND_400_HZ 400
+#define SOUND_BITS_IN_BYTE 8
+
+static struct i2stx_info g_i2stx_pri;
+
+/*
+ * get_sound_i2s_values gets values for i2s parameters
+ *
+ * @param i2stx_info	i2s transmitter transfer param structure
+ * @param blob		FDT blob if enabled else NULL
+ */
+static int get_sound_i2s_values(struct i2stx_info *i2s, const void *blob)
+{
+	int node;
+	int error = 0;
+	int base;
+
+	node = fdt_path_offset(blob, "i2s");
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for sound in device tree\n");
+		return -1;
+	}
+
+	/*
+	 * Get the pre-defined sound specific values from FDT.
+	 * All of these are expected to be correct otherwise
+	 * wrong register values in i2s setup parameters
+	 * may result in no sound play.
+	 */
+	base = fdtdec_get_addr(blob, node, "reg");
+	if (base == FDT_ADDR_T_NONE) {
+		debug("%s: Missing  i2s base\n", __func__);
+		return -1;
+	}
+	i2s->base_address = base;
+
+	i2s->audio_pll_clk = fdtdec_get_int(blob,
+				node, "samsung,i2s-epll-clock-frequency", -1);
+	error |= i2s->audio_pll_clk;
+	debug("audio_pll_clk = %d\n", i2s->audio_pll_clk);
+	i2s->samplingrate = fdtdec_get_int(blob,
+				node, "samsung,i2s-sampling-rate", -1);
+	error |= i2s->samplingrate;
+	debug("samplingrate = %d\n", i2s->samplingrate);
+	i2s->bitspersample = fdtdec_get_int(blob,
+				node, "samsung,i2s-bits-per-sample", -1);
+	error |= i2s->bitspersample;
+	debug("bitspersample = %d\n", i2s->bitspersample);
+	i2s->channels = fdtdec_get_int(blob,
+			node, "samsung,i2s-channels", -1);
+	error |= i2s->channels;
+	debug("channels = %d\n", i2s->channels);
+	i2s->rfs = fdtdec_get_int(blob,
+				node, "samsung,i2s-lr-clk-framesize", -1);
+	error |= i2s->rfs;
+	debug("rfs = %d\n", i2s->rfs);
+	i2s->bfs = fdtdec_get_int(blob,
+				node, "samsung,i2s-bit-clk-framesize", -1);
+	error |= i2s->bfs;
+	debug("bfs = %d\n", i2s->bfs);
+
+	i2s->id = fdtdec_get_int(blob, node, "samsung,i2s-id", -1);
+	error |= i2s->id;
+	debug("id = %d\n", i2s->id);
+
+	if (error == -1) {
+		debug("fail to get sound i2s node properties\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Init codec
+ *
+ * @param blob          FDT blob
+ * @param pi2s_tx	i2s parameters required by codec
+ * @return              int value, 0 for success
+ */
+static int codec_init(const void *blob, struct i2stx_info *pi2s_tx)
+{
+	int ret;
+	const char *codectype;
+	int node;
+
+	/* Get the node from FDT for sound */
+	node = fdt_path_offset(blob, "i2s");
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for sound in device tree\n");
+		debug("node = %d\n", node);
+		return -1;
+	}
+
+	/*
+	 * Get the pre-defined sound codec specific values from FDT.
+	 * All of these are expected to be correct otherwise sound
+	 * can not be played
+	 */
+	codectype = fdt_getprop(blob, node, "samsung,codec-type", NULL);
+	debug("device = %s\n", codectype);
+	if (!strcmp(codectype, "wm8994")) {
+		/* Check the codec type and initialise the same */
+		ret = wm8994_init(blob, pi2s_tx->id + 1,
+				  pi2s_tx->samplingrate,
+				  (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				  pi2s_tx->bitspersample, pi2s_tx->channels);
+	} else if (!strcmp(codectype, "max98095")) {
+		ret = max98095_init(blob, pi2s_tx->id + 1,
+				    pi2s_tx->samplingrate,
+				    (pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				    pi2s_tx->bitspersample);
+	} else {
+		debug("%s: Unknown codec type %s\n", __func__, codectype);
+		return -1;
+	}
+
+	if (ret) {
+		debug("%s: Codec init failed\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+int sound_init(const void *blob)
+{
+	int ret;
+	struct i2stx_info *pi2s_tx = &g_i2stx_pri;
+
+	/* Get the I2S Values */
+	if (get_sound_i2s_values(pi2s_tx, blob) < 0) {
+		debug(" FDT I2S values failed\n");
+		return -1;
+	}
+
+	if (codec_init(blob, pi2s_tx) < 0) {
+		debug(" Codec init failed\n");
+		return -1;
+	}
+
+	ret = i2s_tx_init(pi2s_tx);
+	if (ret) {
+		debug("%s: Failed to init i2c transmit: ret=%d\n", __func__,
+		      ret);
+		return ret;
+	}
+
+
+	return ret;
+}
+
+int sound_play(uint32_t msec, uint32_t frequency)
+{
+	unsigned int *data;
+	unsigned long data_size;
+	unsigned int ret = 0;
+
+	/*Buffer length computation */
+	data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels;
+	data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE);
+	data = malloc(data_size);
+
+	if (data == NULL) {
+		debug("%s: malloc failed\n", __func__);
+		return -1;
+	}
+
+	sound_create_square_wave((unsigned short *)data,
+				 data_size / sizeof(unsigned short),
+				 frequency);
+
+	while (msec >= 1000) {
+		ret = i2s_transfer_tx_data(&g_i2stx_pri, data,
+					   (data_size / sizeof(int)));
+		msec -= 1000;
+	}
+	if (msec) {
+		unsigned long size =
+			(data_size * msec) / (sizeof(int) * 1000);
+
+		ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size);
+	}
+
+	free(data);
+
+	return ret;
+}
diff --git a/roms/u-boot/drivers/sound/sound.c b/roms/u-boot/drivers/sound/sound.c
new file mode 100644
index 00000000..9dda2dba
--- /dev/null
+++ b/roms/u-boot/drivers/sound/sound.c
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <sound.h>
+
+void sound_create_square_wave(unsigned short *data, int size, uint32_t freq)
+{
+	const int sample = 48000;
+	const unsigned short amplitude = 16000; /* between 1 and 32767 */
+	const int period = freq ? sample / freq : 0;
+	const int half = period / 2;
+
+	assert(freq);
+
+	/* Make sure we don't overflow our buffer */
+	if (size % 2)
+		size--;
+
+	while (size) {
+		int i;
+		for (i = 0; size && i < half; i++) {
+			size -= 2;
+			*data++ = amplitude;
+			*data++ = amplitude;
+		}
+		for (i = 0; size && i < period - half; i++) {
+			size -= 2;
+			*data++ = -amplitude;
+			*data++ = -amplitude;
+		}
+	}
+}
diff --git a/roms/u-boot/drivers/sound/wm8994.c b/roms/u-boot/drivers/sound/wm8994.c
new file mode 100644
index 00000000..f8e9a6ea
--- /dev/null
+++ b/roms/u-boot/drivers/sound/wm8994.c
@@ -0,0 +1,915 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include <asm/arch/sound.h>
+#include "wm8994.h"
+#include "wm8994_registers.h"
+
+/* defines for wm8994 system clock selection */
+#define SEL_MCLK1	0x00
+#define SEL_MCLK2	0x08
+#define SEL_FLL1	0x10
+#define SEL_FLL2	0x18
+
+/* fll config to configure fll */
+struct wm8994_fll_config {
+	int src;	/* Source */
+	int in;		/* Input frequency in Hz */
+	int out;	/* output frequency in Hz */
+};
+
+/* codec private data */
+struct wm8994_priv {
+	enum wm8994_type type;		/* codec type of wolfson */
+	int revision;			/* Revision */
+	int sysclk[WM8994_MAX_AIF];	/* System clock frequency in Hz  */
+	int mclk[WM8994_MAX_AIF];	/* master clock frequency in Hz */
+	int aifclk[WM8994_MAX_AIF];	/* audio interface clock in Hz   */
+	struct wm8994_fll_config fll[2]; /* fll config to configure fll */
+};
+
+/* wm 8994 supported sampling rate values */
+static unsigned int src_rate[] = {
+			 8000, 11025, 12000, 16000, 22050, 24000,
+			 32000, 44100, 48000, 88200, 96000
+};
+
+/* op clock divisions */
+static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
+
+/* lr clock frame size ratio */
+static int fs_ratios[] = {
+	64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536
+};
+
+/* bit clock divisors */
+static int bclk_divs[] = {
+	10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
+	640, 880, 960, 1280, 1760, 1920
+};
+
+static struct wm8994_priv g_wm8994_info;
+static unsigned char g_wm8994_i2c_dev_addr;
+static struct sound_codec_info g_codec_info;
+
+/*
+ * Initialise I2C for wm 8994
+ *
+ * @param bus no	i2c bus number in which wm8994 is connected
+ */
+static void wm8994_i2c_init(int bus_no)
+{
+	i2c_set_bus_num(bus_no);
+}
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg	reg number to be write
+ * @param data	data to be writen to the above registor
+ *
+ * @return	int value 1 for change, 0 for no change or negative error code.
+ */
+static int wm8994_i2c_write(unsigned int reg, unsigned short data)
+{
+	unsigned char val[2];
+
+	val[0] = (unsigned char)((data >> 8) & 0xff);
+	val[1] = (unsigned char)(data & 0xff);
+	debug("Write Addr : 0x%04X, Data :  0x%04X\n", reg, data);
+
+	return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg	reg number to be read
+ * @param data	address of read data to be stored
+ *
+ * @return	int value 0 for success, -1 in case of error.
+ */
+static unsigned int  wm8994_i2c_read(unsigned int reg , unsigned short *data)
+{
+	unsigned char val[2];
+	int ret;
+
+	ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+	if (ret != 0) {
+		debug("%s: Error while reading register %#04x\n",
+		      __func__, reg);
+		return -1;
+	}
+
+	*data = val[0];
+	*data <<= 8;
+	*data |= val[1];
+
+	return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg	codec register
+ * @param mask	register mask
+ * @param value	new value
+ *
+ * @return int value 1 if change in the register value,
+ * 0 for no change or negative error code.
+ */
+static int wm8994_update_bits(unsigned int reg, unsigned short mask,
+						unsigned short value)
+{
+	int change , ret = 0;
+	unsigned short old, new;
+
+	if (wm8994_i2c_read(reg, &old) != 0)
+		return -1;
+	new = (old & ~mask) | (value & mask);
+	change  = (old != new) ? 1 : 0;
+	if (change)
+		ret = wm8994_i2c_write(reg, new);
+	if (ret < 0)
+		return ret;
+
+	return change;
+}
+
+/*
+ * Sets i2s set format
+ *
+ * @param aif_id	Interface ID
+ * @param fmt		i2S format
+ *
+ * @return -1 for error and 0  Success.
+ */
+int wm8994_set_fmt(int aif_id, unsigned int fmt)
+{
+	int ms_reg;
+	int aif_reg;
+	int ms = 0;
+	int aif = 0;
+	int aif_clk = 0;
+	int error = 0;
+
+	switch (aif_id) {
+	case 1:
+		ms_reg = WM8994_AIF1_MASTER_SLAVE;
+		aif_reg = WM8994_AIF1_CONTROL_1;
+		aif_clk = WM8994_AIF1_CLOCKING_1;
+		break;
+	case 2:
+		ms_reg = WM8994_AIF2_MASTER_SLAVE;
+		aif_reg = WM8994_AIF2_CONTROL_1;
+		aif_clk = WM8994_AIF2_CLOCKING_1;
+		break;
+	default:
+		debug("%s: Invalid audio interface selection\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		ms = WM8994_AIF1_MSTR;
+		break;
+	default:
+		debug("%s: Invalid i2s master selection\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_B:
+		aif |= WM8994_AIF1_LRCLK_INV;
+	case SND_SOC_DAIFMT_DSP_A:
+		aif |= 0x18;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif |= 0x10;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif |= 0x8;
+		break;
+	default:
+		debug("%s: Invalid i2s format selection\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif |= WM8994_AIF1_BCLK_INV;
+			break;
+		default:
+			debug("%s: Invalid i2s frame inverse selection\n",
+			      __func__);
+			return -1;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif |= WM8994_AIF1_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif |= WM8994_AIF1_LRCLK_INV;
+			break;
+		default:
+			debug("%s: Invalid i2s clock polarity selection\n",
+			      __func__);
+			return -1;
+		}
+		break;
+	default:
+		debug("%s: Invalid i2s format selection\n", __func__);
+		return -1;
+	}
+
+	error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV |
+			WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif);
+
+	error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms);
+	error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK,
+						WM8994_AIF1CLK_ENA);
+	if (error < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Sets hw params FOR WM8994
+ *
+ * @param wm8994		wm8994 information pointer
+ * @param aif_id		Audio interface ID
+ * @param sampling_rate		Sampling rate
+ * @param bits_per_sample	Bits per sample
+ * @param Channels		Channels in the given audio input
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id,
+		unsigned int sampling_rate, unsigned int bits_per_sample,
+		unsigned int channels)
+{
+	int aif1_reg;
+	int aif2_reg;
+	int bclk_reg;
+	int bclk = 0;
+	int rate_reg;
+	int aif1 = 0;
+	int aif2 = 0;
+	int rate_val = 0;
+	int id = aif_id - 1;
+	int i, cur_val, best_val, bclk_rate, best;
+	unsigned short reg_data;
+	int ret = 0;
+
+	switch (aif_id) {
+	case 1:
+		aif1_reg = WM8994_AIF1_CONTROL_1;
+		aif2_reg = WM8994_AIF1_CONTROL_2;
+		bclk_reg = WM8994_AIF1_BCLK;
+		rate_reg = WM8994_AIF1_RATE;
+		break;
+	case 2:
+		aif1_reg = WM8994_AIF2_CONTROL_1;
+		aif2_reg = WM8994_AIF2_CONTROL_2;
+		bclk_reg = WM8994_AIF2_BCLK;
+		rate_reg = WM8994_AIF2_RATE;
+		break;
+	default:
+		return -1;
+	}
+
+	bclk_rate = sampling_rate * 32;
+	switch (bits_per_sample) {
+	case 16:
+		bclk_rate *= 16;
+		break;
+	case 20:
+		bclk_rate *= 20;
+		aif1 |= 0x20;
+		break;
+	case 24:
+		bclk_rate *= 24;
+		aif1 |= 0x40;
+		break;
+	case 32:
+		bclk_rate *= 32;
+		aif1 |= 0x60;
+		break;
+	default:
+		return -1;
+	}
+
+	/* Try to find an appropriate sample rate; look for an exact match. */
+	for (i = 0; i < ARRAY_SIZE(src_rate); i++)
+		if (src_rate[i] == sampling_rate)
+			break;
+
+	if (i == ARRAY_SIZE(src_rate)) {
+		debug("%s: Could not get the best matching samplingrate\n",
+		      __func__);
+		return -1;
+	}
+
+	rate_val |= i << WM8994_AIF1_SR_SHIFT;
+
+	/* AIFCLK/fs ratio; look for a close match in either direction */
+	best = 0;
+	best_val = abs((fs_ratios[0] * sampling_rate)
+						- wm8994->aifclk[id]);
+
+	for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
+		cur_val = abs((fs_ratios[i] * sampling_rate)
+					- wm8994->aifclk[id]);
+		if (cur_val >= best_val)
+			continue;
+		best = i;
+		best_val = cur_val;
+	}
+
+	rate_val |= best;
+
+	/*
+	 * We may not get quite the right frequency if using
+	 * approximate clocks so look for the closest match that is
+	 * higher than the target (we need to ensure that there enough
+	 * BCLKs to clock out the samples).
+	 */
+	best = 0;
+	for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+		cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
+		if (cur_val < 0) /* BCLK table is sorted */
+			break;
+		best = i;
+	}
+
+	if (i ==  ARRAY_SIZE(bclk_divs)) {
+		debug("%s: Could not get the best matching bclk division\n",
+		      __func__);
+		return -1;
+	}
+
+	bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
+	bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
+
+	if (wm8994_i2c_read(aif1_reg, &reg_data) != 0) {
+		debug("%s: AIF1 register read Failed\n", __func__);
+		return -1;
+	}
+
+	if ((channels == 1) && ((reg_data & 0x18) == 0x18))
+		aif2 |= WM8994_AIF1_MONO;
+
+	if (wm8994->aifclk[id] == 0) {
+		debug("%s:Audio interface clock not set\n", __func__);
+		return -1;
+	}
+
+	ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1);
+	ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2);
+	ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
+	ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK |
+				WM8994_AIF1CLK_RATE_MASK, rate_val);
+
+	debug("rate vale = %x , bclk val= %x\n", rate_val, bclk);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface Clock
+ *
+ * @param wm8994	wm8994 information pointer
+ * @param aif		Audio Interface ID
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int configure_aif_clock(struct wm8994_priv *wm8994, int aif)
+{
+	int rate;
+	int reg1 = 0;
+	int offset;
+	int ret;
+
+	/* AIF(1/0) register adress offset calculated */
+	if (aif-1)
+		offset = 4;
+	else
+		offset = 0;
+
+	switch (wm8994->sysclk[aif-1]) {
+	case WM8994_SYSCLK_MCLK1:
+		reg1 |= SEL_MCLK1;
+		rate = wm8994->mclk[0];
+		break;
+
+	case WM8994_SYSCLK_MCLK2:
+		reg1 |= SEL_MCLK2;
+		rate = wm8994->mclk[1];
+		break;
+
+	case WM8994_SYSCLK_FLL1:
+		reg1 |= SEL_FLL1;
+		rate = wm8994->fll[0].out;
+		break;
+
+	case WM8994_SYSCLK_FLL2:
+		reg1 |= SEL_FLL2;
+		rate = wm8994->fll[1].out;
+		break;
+
+	default:
+		debug("%s: Invalid input clock selection [%d]\n",
+		      __func__, wm8994->sysclk[aif-1]);
+		return -1;
+	}
+
+	/* if input clock frequenct is more than 135Mhz then divide */
+	if (rate >= WM8994_MAX_INPUT_CLK_FREQ) {
+		rate /= 2;
+		reg1 |= WM8994_AIF1CLK_DIV;
+	}
+
+	wm8994->aifclk[aif-1] = rate;
+
+	ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset,
+				WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
+				reg1);
+
+	if (aif == WM8994_AIF1)
+		ret |= wm8994_update_bits(WM8994_CLOCKING_1,
+			WM8994_AIF1DSPCLK_ENA_MASK | WM8994_SYSDSPCLK_ENA_MASK,
+			WM8994_AIF1DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
+	else if (aif == WM8994_AIF2)
+		ret |= wm8994_update_bits(WM8994_CLOCKING_1,
+			WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK |
+			WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC |
+			WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface  for the given frequency
+ *
+ * @param wm8994	wm8994 information
+ * @param aif_id	Audio Interface
+ * @param clk_id	Input Clock ID
+ * @param freq		Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id,
+				int clk_id, unsigned int freq)
+{
+	int i;
+	int ret = 0;
+
+	wm8994->sysclk[aif_id - 1] = clk_id;
+
+	switch (clk_id) {
+	case WM8994_SYSCLK_MCLK1:
+		wm8994->mclk[0] = freq;
+		if (aif_id == 2) {
+			ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 ,
+			WM8994_AIF2DAC_DIV_MASK , 0);
+		}
+		break;
+
+	case WM8994_SYSCLK_MCLK2:
+		/* TODO: Set GPIO AF */
+		wm8994->mclk[1] = freq;
+		break;
+
+	case WM8994_SYSCLK_FLL1:
+	case WM8994_SYSCLK_FLL2:
+		break;
+
+	case WM8994_SYSCLK_OPCLK:
+		/*
+		 * Special case - a division (times 10) is given and
+		 * no effect on main clocking.
+		 */
+		if (freq) {
+			for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
+				if (opclk_divs[i] == freq)
+					break;
+			if (i == ARRAY_SIZE(opclk_divs)) {
+				debug("%s frequency divisor not found\n",
+				      __func__);
+				return -1;
+			}
+			ret = wm8994_update_bits(WM8994_CLOCKING_2,
+					    WM8994_OPCLK_DIV_MASK, i);
+			ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+					    WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
+		} else {
+			ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+					    WM8994_OPCLK_ENA, 0);
+		}
+
+	default:
+		debug("%s Invalid input clock selection [%d]\n",
+		      __func__, clk_id);
+		return -1;
+	}
+
+	ret |= configure_aif_clock(wm8994, aif_id);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Initializes Volume for AIF2 to HP path
+ *
+ * @returns -1 for error  and 0 Success.
+ *
+ */
+static int wm8994_init_volume_aif2_dac1(void)
+{
+	int ret;
+
+	/* Unmute AIF2DAC */
+	ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1,
+			WM8994_AIF2DAC_MUTE_MASK, 0);
+
+
+	ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME,
+			WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK,
+			WM8994_AIF2DAC_VU | 0xff);
+
+	ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME,
+			WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK,
+			WM8994_AIF2DAC_VU | 0xff);
+
+
+	ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
+			WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
+			WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+
+	ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
+			WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
+			WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+	/* Head Phone Volume */
+	ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
+	ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Initializes Volume for AIF1 to HP path
+ *
+ * @returns -1 for error  and 0 Success.
+ *
+ */
+static int wm8994_init_volume_aif1_dac1(void)
+{
+	int ret = 0;
+
+	/* Unmute AIF1DAC */
+	ret |= wm8994_i2c_write(WM8994_AIF1_DAC_FILTERS_1, 0x0000);
+
+	ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
+			WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
+			WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+
+	ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
+			WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
+			WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+	/* Head Phone Volume */
+	ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
+	ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Intialise wm8994 codec device
+ *
+ * @param wm8994	wm8994 information
+ *
+ * @returns -1 for error  and 0 Success.
+ */
+static int wm8994_device_init(struct wm8994_priv *wm8994,
+			      enum en_audio_interface aif_id)
+{
+	const char *devname;
+	unsigned short reg_data;
+	int ret;
+
+	wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */
+
+	ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, &reg_data);
+	if (ret < 0) {
+		debug("Failed to read ID register\n");
+		goto err;
+	}
+
+	if (reg_data == WM8994_ID) {
+		devname = "WM8994";
+		debug("Device registered as type %d\n", wm8994->type);
+		wm8994->type = WM8994;
+	} else {
+		debug("Device is not a WM8994, ID is %x\n", ret);
+		ret = -1;
+		goto err;
+	}
+
+	ret = wm8994_i2c_read(WM8994_CHIP_REVISION, &reg_data);
+	if (ret < 0) {
+		debug("Failed to read revision register: %d\n", ret);
+		goto err;
+	}
+	wm8994->revision = reg_data;
+	debug("%s revision %c\n", devname, 'A' + wm8994->revision);
+
+	/* VMID Selection */
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+			WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3);
+
+	/* Charge Pump Enable */
+	ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK,
+					WM8994_CP_ENA);
+
+	/* Head Phone Power Enable */
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+			WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA);
+
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+				WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA);
+
+	if (aif_id == WM8994_AIF1) {
+		ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_2,
+					WM8994_TSHUT_ENA | WM8994_MIXINL_ENA |
+					WM8994_MIXINR_ENA | WM8994_IN2L_ENA |
+					WM8994_IN2R_ENA);
+
+		ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_4,
+					WM8994_ADCL_ENA | WM8994_ADCR_ENA |
+					WM8994_AIF1ADC1R_ENA |
+					WM8994_AIF1ADC1L_ENA);
+
+		/* Power enable for AIF1 and DAC1 */
+		ret |= wm8994_i2c_write(WM8994_POWER_MANAGEMENT_5,
+					WM8994_AIF1DACL_ENA |
+					WM8994_AIF1DACR_ENA |
+					WM8994_DAC1L_ENA | WM8994_DAC1R_ENA);
+	} else if (aif_id == WM8994_AIF2) {
+		/* Power enable for AIF2 and DAC1 */
+		ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5,
+			WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK |
+			WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK,
+			WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA |
+			WM8994_DAC1L_ENA | WM8994_DAC1R_ENA);
+	}
+	/* Head Phone Initialisation */
+	ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+		WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK,
+		WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY);
+
+	ret |= wm8994_update_bits(WM8994_DC_SERVO_1,
+			WM8994_DCS_ENA_CHAN_0_MASK |
+			WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 |
+			WM8994_DCS_ENA_CHAN_1);
+
+	ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+			WM8994_HPOUT1L_DLY_MASK |
+			WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK |
+			WM8994_HPOUT1R_OUTP_MASK |
+			WM8994_HPOUT1L_RMV_SHORT_MASK |
+			WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY |
+			WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP |
+			WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT |
+			WM8994_HPOUT1R_RMV_SHORT);
+
+	/* MIXER Config DAC1 to HP */
+	ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1,
+			WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L);
+
+	ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2,
+			WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R);
+
+	if (aif_id == WM8994_AIF1) {
+		/* Routing AIF1 to DAC1 */
+		ret |= wm8994_i2c_write(WM8994_DAC1_LEFT_MIXER_ROUTING,
+				WM8994_AIF1DAC1L_TO_DAC1L);
+
+		ret |= wm8994_i2c_write(WM8994_DAC1_RIGHT_MIXER_ROUTING,
+					WM8994_AIF1DAC1R_TO_DAC1R);
+
+		/* GPIO Settings for AIF1 */
+		ret |=  wm8994_i2c_write(WM8994_GPIO_1, WM8994_GPIO_DIR_OUTPUT
+					 | WM8994_GPIO_FUNCTION_I2S_CLK
+					 | WM8994_GPIO_INPUT_DEBOUNCE);
+
+		ret |= wm8994_init_volume_aif1_dac1();
+	} else if (aif_id == WM8994_AIF2) {
+		/* Routing AIF2 to DAC1 */
+		ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING,
+				WM8994_AIF2DACL_TO_DAC1L_MASK,
+				WM8994_AIF2DACL_TO_DAC1L);
+
+		ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING,
+				WM8994_AIF2DACR_TO_DAC1R_MASK,
+				WM8994_AIF2DACR_TO_DAC1R);
+
+		/* GPIO Settings for AIF2 */
+		/* B CLK */
+		ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK |
+					WM8994_GPIO_FUNCTION_MASK ,
+					WM8994_GPIO_DIR_OUTPUT);
+
+		/* LR CLK */
+		ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK |
+					WM8994_GPIO_FUNCTION_MASK,
+					WM8994_GPIO_DIR_OUTPUT);
+
+		/* DATA */
+		ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK |
+					WM8994_GPIO_FUNCTION_MASK,
+					WM8994_GPIO_DIR_OUTPUT);
+
+		ret |= wm8994_init_volume_aif2_dac1();
+	}
+
+	if (ret < 0)
+		goto err;
+
+	debug("%s: Codec chip init ok\n", __func__);
+	return 0;
+err:
+	debug("%s: Codec chip init error\n", __func__);
+	return -1;
+}
+
+/*
+ * Gets fdt values for wm8994 config parameters
+ *
+ * @param pcodec_info	codec information structure
+ * @param blob		FDT blob
+ * @return		int value, 0 for success
+ */
+static int get_codec_values(struct sound_codec_info *pcodec_info,
+			const void *blob)
+{
+	int error = 0;
+#ifdef CONFIG_OF_CONTROL
+	enum fdt_compat_id compat;
+	int node;
+	int parent;
+
+	/* Get the node from FDT for codec */
+	node = fdtdec_next_compatible(blob, 0, COMPAT_WOLFSON_WM8994_CODEC);
+	if (node <= 0) {
+		debug("EXYNOS_SOUND: No node for codec in device tree\n");
+		debug("node = %d\n", node);
+		return -1;
+	}
+
+	parent = fdt_parent_offset(blob, node);
+	if (parent < 0) {
+		debug("%s: Cannot find node parent\n", __func__);
+		return -1;
+	}
+
+	compat = fdtdec_lookup(blob, parent);
+	switch (compat) {
+	case COMPAT_SAMSUNG_S3C2440_I2C:
+		pcodec_info->i2c_bus = i2c_get_bus_num_fdt(parent);
+		error |= pcodec_info->i2c_bus;
+		debug("i2c bus = %d\n", pcodec_info->i2c_bus);
+		pcodec_info->i2c_dev_addr = fdtdec_get_int(blob, node,
+							"reg", 0);
+		error |= pcodec_info->i2c_dev_addr;
+		debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+		break;
+	default:
+		debug("%s: Unknown compat id %d\n", __func__, compat);
+		return -1;
+	}
+#else
+	pcodec_info->i2c_bus = AUDIO_I2C_BUS;
+	pcodec_info->i2c_dev_addr = AUDIO_I2C_REG;
+	debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr);
+#endif
+
+	pcodec_info->codec_type = CODEC_WM_8994;
+
+	if (error == -1) {
+		debug("fail to get wm8994 codec node properties\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/* WM8994 Device Initialisation */
+int wm8994_init(const void *blob, enum en_audio_interface aif_id,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample, unsigned int channels)
+{
+	int ret = 0;
+	struct sound_codec_info *pcodec_info = &g_codec_info;
+
+	/* Get the codec Values */
+	if (get_codec_values(pcodec_info, blob) < 0) {
+		debug("FDT Codec values failed\n");
+		return -1;
+	}
+
+	/* shift the device address by 1 for 7 bit addressing */
+	g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
+	wm8994_i2c_init(pcodec_info->i2c_bus);
+
+	if (pcodec_info->codec_type == CODEC_WM_8994) {
+		g_wm8994_info.type = WM8994;
+	} else {
+		debug("%s: Codec id [%d] not defined\n", __func__,
+		      pcodec_info->codec_type);
+		return -1;
+	}
+
+	ret = wm8994_device_init(&g_wm8994_info, aif_id);
+	if (ret < 0) {
+		debug("%s: wm8994 codec chip init failed\n", __func__);
+		return ret;
+	}
+
+	ret =  wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1,
+							mclk_freq);
+	if (ret < 0) {
+		debug("%s: wm8994 codec set sys clock failed\n", __func__);
+		return ret;
+	}
+
+	ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate,
+						bits_per_sample, channels);
+
+	if (ret == 0) {
+		ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S |
+						SND_SOC_DAIFMT_NB_NF |
+						SND_SOC_DAIFMT_CBS_CFS);
+	}
+	return ret;
+}
diff --git a/roms/u-boot/drivers/sound/wm8994.h b/roms/u-boot/drivers/sound/wm8994.h
new file mode 100644
index 00000000..6d0c7ca2
--- /dev/null
+++ b/roms/u-boot/drivers/sound/wm8994.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chadrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __WM8994_H__
+#define __WM8994_H__
+
+/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */
+#define WM8994_SYSCLK_MCLK1	1
+#define WM8994_SYSCLK_MCLK2	2
+#define WM8994_SYSCLK_FLL1	3
+#define WM8994_SYSCLK_FLL2	4
+
+/*  Avilable audi interface ports in wm8994 codec */
+enum en_audio_interface {
+	 WM8994_AIF1 = 1,
+	 WM8994_AIF2,
+	 WM8994_AIF3
+};
+
+/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */
+#define WM8994_SYSCLK_OPCLK	5
+
+#define WM8994_FLL1	1
+#define WM8994_FLL2	2
+
+#define WM8994_FLL_SRC_MCLK1	1
+#define WM8994_FLL_SRC_MCLK2	2
+#define WM8994_FLL_SRC_LRCLK	3
+#define WM8994_FLL_SRC_BCLK	4
+
+/* maximum available digital interfac in the dac to configure */
+#define WM8994_MAX_AIF			2
+
+#define WM8994_MAX_INPUT_CLK_FREQ	13500000
+#define WM8994_ID			0x8994
+
+enum wm8994_vmid_mode {
+	WM8994_VMID_NORMAL,
+	WM8994_VMID_FORCE,
+};
+
+/* wm 8994 family devices */
+enum wm8994_type {
+	WM8994 = 0,
+	WM8958 = 1,
+	WM1811 = 2,
+};
+
+/*
+ * intialise wm8994 sound codec device for the given configuration
+ *
+ * @param blob			FDT node for codec values
+ * @param aif_id		enum value of codec interface port in which
+ *				soc i2s is connected
+ * @param sampling_rate		Sampling rate ranges between from 8khz to 96khz
+ * @param mclk_freq		Master clock frequency.
+ * @param bits_per_sample	bits per Sample can be 16 or 24
+ * @param channels		Number of channnels, maximum 2
+ *
+ * @returns -1 for error  and 0  Success.
+ */
+int wm8994_init(const void *blob, enum en_audio_interface aif_id,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample, unsigned int channels);
+#endif /*__WM8994_H__ */
diff --git a/roms/u-boot/drivers/sound/wm8994_registers.h b/roms/u-boot/drivers/sound/wm8994_registers.h
new file mode 100644
index 00000000..0aba2fdf
--- /dev/null
+++ b/roms/u-boot/drivers/sound/wm8994_registers.h
@@ -0,0 +1,326 @@
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __WM8994_REGISTERS_H__
+#define __WM8994_REGISTERS_H__
+
+/*
+ * Register values.
+ */
+#define WM8994_SOFTWARE_RESET                   0x00
+#define WM8994_POWER_MANAGEMENT_1               0x01
+#define WM8994_POWER_MANAGEMENT_2               0x02
+#define WM8994_POWER_MANAGEMENT_4		0x04
+#define WM8994_POWER_MANAGEMENT_5               0x05
+#define WM8994_LEFT_OUTPUT_VOLUME               0x1C
+#define WM8994_RIGHT_OUTPUT_VOLUME              0x1D
+#define WM8994_OUTPUT_MIXER_1                   0x2D
+#define WM8994_OUTPUT_MIXER_2                   0x2E
+#define WM8994_CHARGE_PUMP_1                    0x4C
+#define WM8994_DC_SERVO_1                       0x54
+#define WM8994_ANALOGUE_HP_1                    0x60
+#define WM8994_CHIP_REVISION                    0x100
+#define WM8994_AIF1_CLOCKING_1                  0x200
+#define WM8994_AIF1_CLOCKING_2                  0x201
+#define WM8994_AIF2_CLOCKING_1                  0x204
+#define WM8994_CLOCKING_1                       0x208
+#define WM8994_CLOCKING_2                       0x209
+#define WM8994_AIF1_RATE                        0x210
+#define WM8994_AIF2_RATE                        0x211
+#define WM8994_RATE_STATUS                      0x212
+#define WM8994_AIF1_CONTROL_1                   0x300
+#define WM8994_AIF1_CONTROL_2                   0x301
+#define WM8994_AIF1_MASTER_SLAVE                0x302
+#define WM8994_AIF1_BCLK                        0x303
+#define WM8994_AIF2_CONTROL_1                   0x310
+#define WM8994_AIF2_CONTROL_2                   0x311
+#define WM8994_AIF2_MASTER_SLAVE                0x312
+#define WM8994_AIF2_BCLK                        0x313
+#define WM8994_AIF1_DAC_FILTERS_1		0x420
+#define WM8994_AIF2_DAC_LEFT_VOLUME             0x502
+#define WM8994_AIF2_DAC_RIGHT_VOLUME            0x503
+#define WM8994_AIF2_DAC_FILTERS_1               0x520
+#define WM8994_DAC1_LEFT_MIXER_ROUTING          0x601
+#define WM8994_DAC1_RIGHT_MIXER_ROUTING         0x602
+#define WM8994_DAC1_LEFT_VOLUME                 0x610
+#define WM8994_DAC1_RIGHT_VOLUME                0x611
+#define WM8994_GPIO_1				0x700
+#define WM8994_GPIO_3                           0x702
+#define WM8994_GPIO_4                           0x703
+#define WM8994_GPIO_5                           0x704
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+/* SW_RESET */
+#define WM8994_SW_RESET                              1
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA                      0x0200
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_MASK                 0x0200
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA                      0x0100
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_MASK                 0x0100
+/* VMID_SEL - [2:1] */
+#define WM8994_VMID_SEL_MASK                    0x0006
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA                         0x0001
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA_MASK                    0x0001
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+/* OPCLK_ENA */
+#define WM8994_OPCLK_ENA                        0x0800
+
+#define WM8994_TSHUT_ENA			0x4000
+#define WM8994_MIXINL_ENA			0x0200
+#define WM8994_MIXINR_ENA			0x0100
+#define WM8994_IN2L_ENA				0x0080
+#define WM8994_IN2R_ENA				0x0020
+
+/*
+ * R5 (0x04) - Power Management (4)
+ */
+#define WM8994_ADCL_ENA				0x0001
+#define WM8994_ADCR_ENA				0x0002
+#define WM8994_AIF1ADC1R_ENA			0x0100
+#define WM8994_AIF1ADC1L_ENA			0x0200
+
+/*
+ * R5 (0x05) - Power Management (5)
+ */
+/* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA                     0x2000
+#define WM8994_AIF2DACL_ENA_MASK                0x2000
+/* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA                     0x1000
+#define WM8994_AIF2DACR_ENA_MASK                0x1000
+/* AIF1DACL_ENA */
+#define WM8994_AIF1DACL_ENA			0x0200
+#define WM8994_AIF1DACL_ENA_MASK		0x0200
+/* AIF1DACR_ENA */
+#define WM8994_AIF1DACR_ENA			0x0100
+#define WM8994_AIF1DACR_ENA_MASK		0x0100
+/* DAC1L_ENA */
+#define WM8994_DAC1L_ENA                        0x0002
+#define WM8994_DAC1L_ENA_MASK                   0x0002
+/* DAC1R_ENA */
+#define WM8994_DAC1R_ENA                        0x0001
+#define WM8994_DAC1R_ENA_MASK                   0x0001
+
+/*
+ * R45 (0x2D) - Output Mixer (1)
+ */
+/* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L                 0x0100
+#define WM8994_DAC1L_TO_HPOUT1L_MASK            0x0100
+
+/*
+ * R46 (0x2E) - Output Mixer (2)
+ */
+/* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R                 0x0100
+#define WM8994_DAC1R_TO_HPOUT1R_MASK            0x0100
+
+/*
+ * R76 (0x4C) - Charge Pump (1)
+ */
+/* CP_ENA */
+#define WM8994_CP_ENA                           0x8000
+#define WM8994_CP_ENA_MASK                      0x8000
+/*
+ * R84 (0x54) - DC Servo (1)
+ */
+/* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1                   0x0002
+#define WM8994_DCS_ENA_CHAN_1_MASK              0x0002
+/* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0                   0x0001
+#define WM8994_DCS_ENA_CHAN_0_MASK              0x0001
+
+/*
+ * R96 (0x60) - Analogue HP (1)
+ */
+/* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT                0x0080
+#define WM8994_HPOUT1L_RMV_SHORT_MASK           0x0080
+/* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP                     0x0040
+#define WM8994_HPOUT1L_OUTP_MASK                0x0040
+/* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY                      0x0020
+#define WM8994_HPOUT1L_DLY_MASK                 0x0020
+/* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT                0x0008
+#define WM8994_HPOUT1R_RMV_SHORT_MASK           0x0008
+/* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP                     0x0004
+#define WM8994_HPOUT1R_OUTP_MASK                0x0004
+/* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY                      0x0002
+#define WM8994_HPOUT1R_DLY_MASK                 0x0002
+
+/*
+ * R512 (0x200) - AIF1 Clocking (1)
+ */
+/* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_SRC_MASK                 0x0018
+/* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV                      0x0002
+/* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA                      0x0001
+#define WM8994_AIF1CLK_ENA_MASK                 0x0001
+
+/*
+ * R517 (0x205) - AIF2 Clocking (2)
+ */
+/* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2DAC_DIV_MASK                 0x0038
+
+/*
+ * R520 (0x208) - Clocking (1)
+ */
+/* AIF1DSPCLK_ENA */
+#define WM8994_AIF1DSPCLK_ENA			0x0008
+#define WM8994_AIF1DSPCLK_ENA_MASK		0x0008
+/* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA                   0x0004
+#define WM8994_AIF2DSPCLK_ENA_MASK              0x0004
+/* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA                    0x0002
+#define WM8994_SYSDSPCLK_ENA_MASK               0x0002
+/* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC                       0x0001
+
+/*
+ * R521 (0x209) - Clocking (2)
+ */
+/* OPCLK_DIV - [2:0] */
+#define WM8994_OPCLK_DIV_MASK                   0x0007
+
+/*
+ * R528 (0x210) - AIF1 Rate
+ */
+/* AIF1_SR - [7:4] */
+#define WM8994_AIF1_SR_MASK                     0x00F0
+#define WM8994_AIF1_SR_SHIFT                         4
+/* AIF1CLK_RATE - [3:0] */
+#define WM8994_AIF1CLK_RATE_MASK                0x000F
+
+/*
+ * R768 (0x300) - AIF1 Control (1)
+ */
+/* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV                    0x0100
+/* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV                   0x0080
+#define WM8994_AIF1_LRCLK_INV_MASK              0x0080
+/* AIF1_WL - [6:5] */
+#define WM8994_AIF1_WL_MASK                     0x0060
+/* AIF1_FMT - [4:3] */
+#define WM8994_AIF1_FMT_MASK                    0x0018
+
+/*
+ * R769 (0x301) - AIF1 Control (2)
+ */
+/* AIF1_MONO */
+#define WM8994_AIF1_MONO                        0x0100
+
+/*
+ * R770 (0x302) - AIF1 Master/Slave
+ */
+/* AIF1_MSTR */
+#define WM8994_AIF1_MSTR                        0x4000
+#define WM8994_AIF1_MSTR_MASK                   0x4000
+
+/*
+ * R771 (0x303) - AIF1 BCLK
+ */
+/* AIF1_BCLK_DIV - [8:4] */
+#define WM8994_AIF1_BCLK_DIV_MASK               0x01F0
+#define WM8994_AIF1_BCLK_DIV_SHIFT                   4
+
+/*
+ * R1282 (0x502) - AIF2 DAC Left Volume
+ */
+/* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU                       0x0100
+#define WM8994_AIF2DAC_VU_MASK                  0x0100
+/* AIF2DACL_VOL - [7:0] */
+#define WM8994_AIF2DACL_VOL_MASK                0x00FF
+
+/*
+ * R1283 (0x503) - AIF2 DAC Right Volume
+ */
+/* AIF2DACR_VOL - [7:0] */
+#define WM8994_AIF2DACR_VOL_MASK                0x00FF
+
+/*
+ * R1312 (0x520) - AIF2 DAC Filters (1)
+ */
+/* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_MASK                0x0200
+
+/*
+ * R1537 (0x601) - DAC1 Left Mixer Routing
+ */
+/* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L                0x0004
+#define WM8994_AIF2DACL_TO_DAC1L_MASK           0x0004
+/* AIF1DAC1L_TO_DAC1L */
+#define WM8994_AIF1DAC1L_TO_DAC1L		0x0001
+
+/*
+ * R1538 (0x602) - DAC1 Right Mixer Routing
+ */
+/* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R                0x0004
+#define WM8994_AIF2DACR_TO_DAC1R_MASK           0x0004
+/* AIF1DAC1R_TO_DAC1R */
+#define WM8994_AIF1DAC1R_TO_DAC1R		0x0001
+
+/*
+ * R1552 (0x610) - DAC1 Left Volume
+ */
+/* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_MASK                  0x0200
+/* DAC1_VU */
+#define WM8994_DAC1_VU                          0x0100
+#define WM8994_DAC1_VU_MASK                     0x0100
+/* DAC1L_VOL - [7:0] */
+#define WM8994_DAC1L_VOL_MASK                   0x00FF
+
+/*
+ * R1553 (0x611) - DAC1 Right Volume
+ */
+/* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_MASK                  0x0200
+/* DAC1R_VOL - [7:0] */
+#define WM8994_DAC1R_VOL_MASK                   0x00FF
+
+/*
+ *  GPIO
+ */
+/* OUTPUT PIN */
+#define WM8994_GPIO_DIR_OUTPUT			0x8000
+/* GPIO PIN MASK */
+#define WM8994_GPIO_DIR_MASK			0xFFE0
+/* I2S CLK */
+#define WM8994_GPIO_FUNCTION_I2S_CLK		0x0001
+#define WM8994_GPIO_INPUT_DEBOUNCE		0x0100
+/* GPn FN */
+#define WM8994_GPIO_FUNCTION_MASK		0x001F
+#endif