diff options
| author | fishsoupisgood <github@madingley.org> | 2019-04-29 01:17:54 +0100 |
|---|---|---|
| committer | fishsoupisgood <github@madingley.org> | 2019-05-27 03:43:43 +0100 |
| commit | 3f2546b2ef55b661fd8dd69682b38992225e86f6 (patch) | |
| tree | 65ca85f13617aee1dce474596800950f266a456c /roms/u-boot/doc/README.omap-reset-time | |
| download | qemu-master.tar.gz qemu-master.tar.bz2 qemu-master.zip | |
Diffstat (limited to 'roms/u-boot/doc/README.omap-reset-time')
| -rw-r--r-- | roms/u-boot/doc/README.omap-reset-time | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/roms/u-boot/doc/README.omap-reset-time b/roms/u-boot/doc/README.omap-reset-time new file mode 100644 index 00000000..0c974bac --- /dev/null +++ b/roms/u-boot/doc/README.omap-reset-time @@ -0,0 +1,20 @@ +README on how reset time on OMAPs should be calculated + +CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC: +Most OMAPs' provide a way to specify the time for +which the reset should be held low while the voltages +and Oscillator outputs stabilize. + +This time is mostly board and PMIC dependent. Hence the +boards are expected to specify a pre-computed time +using the above option, (the details on how to compute +the value are given below) without which a default time +as specified by CONFIG_DEFAULT_OMAP_RESET_TIME_MAX_USEC +is used. + +The value for CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC +can be computed using a summation of the below 3 parameters +-1- Time taken by the Osciallator to stop and restart +-2- PMIC OTP time +-3- Voltage ramp time, which can be derived using the +PMIC slew rate and value of voltage ramp needed. |