Initial import of qemu-2.4.1HEADmaster

36 files changed, 4586 insertions, 0 deletions

diff --git a/roms/u-boot/board/keymile/common/common.c b/roms/u-boot/board/keymile/common/common.c
new file mode 100644
index 00000000..f941e44e
--- /dev/null
+++ b/roms/u-boot/board/keymile/common/common.c
@@ -0,0 +1,373 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * (C) Copyright 2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <command.h>
+#include <malloc.h>
+#include <hush.h>
+#include <net.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <linux/ctype.h>
+
+#if defined(CONFIG_POST)
+#include "post.h"
+#endif
+#include "common.h"
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Set Keymile specific environment variables
+ * Currently only some memory layout variables are calculated here
+ * ... ------------------------------------------------
+ * ... |@rootfsaddr |@pnvramaddr |@varaddr |@reserved |@END_OF_RAM
+ * ... |<------------------- pram ------------------->|
+ * ... ------------------------------------------------
+ * @END_OF_RAM: denotes the RAM size
+ * @pnvramaddr: Startadress of pseudo non volatile RAM in hex
+ * @pram      : preserved ram size in k
+ * @varaddr   : startadress for /var mounted into RAM
+ */
+int set_km_env(void)
+{
+	uchar buf[32];
+	unsigned int pnvramaddr;
+	unsigned int pram;
+	unsigned int varaddr;
+	unsigned int kernelmem;
+	char *p;
+	unsigned long rootfssize = 0;
+
+	pnvramaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM
+			- CONFIG_KM_PNVRAM;
+	sprintf((char *)buf, "0x%x", pnvramaddr);
+	setenv("pnvramaddr", (char *)buf);
+
+	/* try to read rootfssize (ram image) from envrionment */
+	p = getenv("rootfssize");
+	if (p != NULL)
+		strict_strtoul(p, 16, &rootfssize);
+	pram = (rootfssize + CONFIG_KM_RESERVED_PRAM + CONFIG_KM_PHRAM +
+		CONFIG_KM_PNVRAM) / 0x400;
+	sprintf((char *)buf, "0x%x", pram);
+	setenv("pram", (char *)buf);
+
+	varaddr = gd->ram_size - CONFIG_KM_RESERVED_PRAM - CONFIG_KM_PHRAM;
+	sprintf((char *)buf, "0x%x", varaddr);
+	setenv("varaddr", (char *)buf);
+
+	kernelmem = gd->ram_size - 0x400 * pram;
+	sprintf((char *)buf, "0x%x", kernelmem);
+	setenv("kernelmem", (char *)buf);
+
+	return 0;
+}
+
+#if defined(CONFIG_SYS_I2C_INIT_BOARD)
+static void i2c_write_start_seq(void)
+{
+	set_sda(1);
+	udelay(DELAY_HALF_PERIOD);
+	set_scl(1);
+	udelay(DELAY_HALF_PERIOD);
+	set_sda(0);
+	udelay(DELAY_HALF_PERIOD);
+	set_scl(0);
+	udelay(DELAY_HALF_PERIOD);
+}
+
+/*
+ * I2C is a synchronous protocol and resets of the processor in the middle
+ * of an access can block the I2C Bus until a powerdown of the full unit is
+ * done. This function toggles the SCL until the SCL and SCA line are
+ * released, but max. 16 times, after this a I2C start-sequence is sent.
+ * This I2C Deblocking mechanism was developed by Keymile in association
+ * with Anatech and Atmel in 1998.
+ */
+int i2c_make_abort(void)
+{
+	int	scl_state = 0;
+	int	sda_state = 0;
+	int	i = 0;
+	int	ret = 0;
+
+	if (!get_sda()) {
+		ret = -1;
+		while (i < 16) {
+			i++;
+			set_scl(0);
+			udelay(DELAY_ABORT_SEQ);
+			set_scl(1);
+			udelay(DELAY_ABORT_SEQ);
+			scl_state = get_scl();
+			sda_state = get_sda();
+			if (scl_state && sda_state) {
+				ret = 0;
+				break;
+			}
+		}
+	}
+	if (ret == 0)
+		for (i = 0; i < 5; i++)
+			i2c_write_start_seq();
+
+	/* respect stop setup time */
+	udelay(DELAY_ABORT_SEQ);
+	set_scl(1);
+	udelay(DELAY_ABORT_SEQ);
+	set_sda(1);
+	get_sda();
+
+	return ret;
+}
+
+/**
+ * i2c_init_board - reset i2c bus. When the board is powercycled during a
+ * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
+ */
+void i2c_init_board(void)
+{
+	/* Now run the AbortSequence() */
+	i2c_make_abort();
+}
+#endif
+
+#if defined(CONFIG_KM_COMMON_ETH_INIT)
+int board_eth_init(bd_t *bis)
+{
+	if (ethernet_present())
+		return cpu_eth_init(bis);
+
+	return -1;
+}
+#endif
+
+/*
+ * do_setboardid command
+ * read out the board id and the hw key from the intventory EEPROM and set
+ * this values as environment variables.
+ */
+static int do_setboardid(cmd_tbl_t *cmdtp, int flag, int argc,
+				char *const argv[])
+{
+	unsigned char buf[32];
+	char *p;
+
+	p = get_local_var("IVM_BoardId");
+	if (p == NULL) {
+		printf("can't get the IVM_Boardid\n");
+		return 1;
+	}
+	sprintf((char *)buf, "%s", p);
+	setenv("boardid", (char *)buf);
+	printf("set boardid=%s\n", buf);
+
+	p = get_local_var("IVM_HWKey");
+	if (p == NULL) {
+		printf("can't get the IVM_HWKey\n");
+		return 1;
+	}
+	sprintf((char *)buf, "%s", p);
+	setenv("hwkey", (char *)buf);
+	printf("set hwkey=%s\n", buf);
+	printf("Execute manually saveenv for persistent storage.\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(km_setboardid, 1, 0, do_setboardid, "setboardid", "read out bid and "
+				 "hwkey from IVM and set in environment");
+
+/*
+ * command km_checkbidhwk
+ *	if "boardid" and "hwkey" are not already set in the environment, do:
+ *		if a "boardIdListHex" exists in the environment:
+ *			- read ivm data for boardid and hwkey
+ *			- compare each entry of the boardIdListHex with the
+ *				IVM data:
+ *			if match:
+ *				set environment variables boardid, boardId,
+ *				hwkey, hwKey to	the found values
+ *				both (boardid and boardId) are set because
+ *				they might be used differently in the
+ *				application and in the init scripts (?)
+ *	return 0 in case of match, 1 if not match or error
+ */
+static int do_checkboardidhwk(cmd_tbl_t *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	unsigned long ivmbid = 0, ivmhwkey = 0;
+	unsigned long envbid = 0, envhwkey = 0;
+	char *p;
+	int verbose = argc > 1 && *argv[1] == 'v';
+	int rc = 0;
+
+	/*
+	 * first read out the real inventory values, these values are
+	 * already stored in the local hush variables
+	 */
+	p = get_local_var("IVM_BoardId");
+	if (p == NULL) {
+		printf("can't get the IVM_Boardid\n");
+		return 1;
+	}
+	rc = strict_strtoul(p, 16, &ivmbid);
+
+	p = get_local_var("IVM_HWKey");
+	if (p == NULL) {
+		printf("can't get the IVM_HWKey\n");
+		return 1;
+	}
+	rc = strict_strtoul(p, 16, &ivmhwkey);
+
+	if (!ivmbid || !ivmhwkey) {
+		printf("Error: IVM_BoardId and/or IVM_HWKey not set!\n");
+		return rc;
+	}
+
+	/* now try to read values from environment if available */
+	p = getenv("boardid");
+	if (p != NULL)
+		rc = strict_strtoul(p, 16, &envbid);
+	p = getenv("hwkey");
+	if (p != NULL)
+		rc = strict_strtoul(p, 16, &envhwkey);
+
+	if (rc != 0) {
+		printf("strict_strtoul returns error: %d", rc);
+		return rc;
+	}
+
+	if (!envbid || !envhwkey) {
+		/*
+		 * BoardId/HWkey not available in the environment, so try the
+		 * environment variable for BoardId/HWkey list
+		 */
+		char *bidhwklist = getenv("boardIdListHex");
+
+		if (bidhwklist) {
+			int found = 0;
+			char *rest = bidhwklist;
+			char *endp;
+
+			if (verbose) {
+				printf("IVM_BoardId: %ld, IVM_HWKey=%ld\n",
+					ivmbid, ivmhwkey);
+				printf("boardIdHwKeyList: %s\n",
+					bidhwklist);
+			}
+			while (!found) {
+				/* loop over each bid/hwkey pair in the list */
+				unsigned long bid   = 0;
+				unsigned long hwkey = 0;
+
+				while (*rest && !isxdigit(*rest))
+					rest++;
+				/*
+				 * use simple_strtoul because we need &end and
+				 * we know we got non numeric char at the end
+				 */
+				bid = simple_strtoul(rest, &endp, 16);
+				/* BoardId and HWkey are separated with a "_" */
+				if (*endp == '_') {
+					rest  = endp + 1;
+					/*
+					 * use simple_strtoul because we need
+					 * &end
+					 */
+					hwkey = simple_strtoul(rest, &endp, 16);
+					rest  = endp;
+					while (*rest && !isxdigit(*rest))
+						rest++;
+				}
+				if ((!bid) || (!hwkey)) {
+					/* end of list */
+					break;
+				}
+				if (verbose) {
+					printf("trying bid=0x%lX, hwkey=%ld\n",
+						bid, hwkey);
+				}
+				/*
+				 * Compare the values of the found entry in the
+				 * list with the valid values which are stored
+				 * in the inventory eeprom. If they are equal
+				 * set the values in environment variables.
+				 */
+				if ((bid == ivmbid) && (hwkey == ivmhwkey)) {
+					char buf[10];
+
+					found = 1;
+					envbid   = bid;
+					envhwkey = hwkey;
+					sprintf(buf, "%lx", bid);
+					setenv("boardid", buf);
+					sprintf(buf, "%lx", hwkey);
+					setenv("hwkey", buf);
+				}
+			} /* end while( ! found ) */
+		}
+	}
+
+	/* compare now the values */
+	if ((ivmbid == envbid) && (ivmhwkey == envhwkey)) {
+		printf("boardid=0x%3lX, hwkey=%ld\n", envbid, envhwkey);
+		rc = 0; /* match */
+	} else {
+		printf("Error: env boardid=0x%3lX, hwkey=%ld\n", envbid,
+			envhwkey);
+		printf("       IVM bId=0x%3lX, hwKey=%ld\n", ivmbid, ivmhwkey);
+		rc = 1; /* don't match */
+	}
+	return rc;
+}
+
+U_BOOT_CMD(km_checkbidhwk, 2, 0, do_checkboardidhwk,
+		"check boardid and hwkey",
+		"[v]\n  - check environment parameter "\
+		"\"boardIdListHex\" against stored boardid and hwkey "\
+		"from the IVM\n    v: verbose output"
+);
+
+/*
+ * command km_checktestboot
+ *  if the testpin of the board is asserted, return 1
+ *  *	else return 0
+ */
+static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, int argc,
+			char *const argv[])
+{
+	int testpin = 0;
+	char *s = NULL;
+	int testboot = 0;
+	int verbose = argc > 1 && *argv[1] == 'v';
+
+#if defined(CONFIG_POST)
+	testpin = post_hotkeys_pressed();
+	s = getenv("test_bank");
+#endif
+	/* when test_bank is not set, act as if testpin is not asserted */
+	testboot = (testpin != 0) && (s);
+	if (verbose) {
+		printf("testpin   = %d\n", testpin);
+		printf("test_bank = %s\n", s ? s : "not set");
+		printf("boot test app : %s\n", (testboot) ? "yes" : "no");
+	}
+	/* return 0 means: testboot, therefore we need the inversion */
+	return !testboot;
+}
+
+U_BOOT_CMD(km_checktestboot, 2, 0, do_checktestboot,
+		"check if testpin is asserted",
+		"[v]\n  v - verbose output"
+);
diff --git a/roms/u-boot/board/keymile/common/common.h b/roms/u-boot/board/keymile/common/common.h
new file mode 100644
index 00000000..e075f468
--- /dev/null
+++ b/roms/u-boot/board/keymile/common/common.h
@@ -0,0 +1,152 @@
+/*
+ * (C) Copyright 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __KEYMILE_COMMON_H
+#define __KEYMILE_COMMON_H
+
+#define WRG_RESET	0x80
+#define H_OPORTS_14	0x40
+#define WRG_LED		0x02
+#define WRL_BOOT	0x01
+
+#define OPRTL_XBUFENA	0x20
+
+#define H_OPORTS_SCC4_ENA	0x10
+#define H_OPORTS_SCC4_FD_ENA	0x04
+#define H_OPORTS_FCC1_PW_DWN	0x01
+
+#define PIGGY_PRESENT	0x80
+
+struct km_bec_fpga {
+	unsigned char	id;
+	unsigned char	rev;
+	unsigned char	oprth;
+	unsigned char	oprtl;
+	unsigned char	res1[3];
+	unsigned char	bprth;
+	unsigned char	bprtl;
+	unsigned char	gprt3;
+	unsigned char	gprt2;
+	unsigned char	gprt1;
+	unsigned char	gprt0;
+	unsigned char	res2[2];
+	unsigned char	prst;
+	unsigned char	res3[0xfff0];
+	unsigned char	pgy_id;
+	unsigned char	pgy_rev;
+	unsigned char	pgy_outputs;
+	unsigned char	pgy_eth;
+};
+
+#define BFTICU_DIPSWITCH_MASK   0x0f
+
+/*
+ * BFTICU FPGA iomap
+ * BFTICU is used on mgcoge and mgocge3ne
+ */
+struct bfticu_iomap {
+	u8	xi_ena;		/* General defect enable */
+	u8	pack1[3];
+	u8	en_csn;
+	u8	pack2;
+	u8	safe_mem;
+	u8	pack3;
+	u8	id;
+	u8	pack4;
+	u8	rev;
+	u8	build;
+	u8	p_frc;
+	u8	p_msk;
+	u8	pack5[2];
+	u8	xg_int;
+	u8	pack6[15];
+	u8	s_conf;
+	u8	pack7;
+	u8	dmx_conf12;
+	u8	pack8;
+	u8	s_clkslv;
+	u8	pack9[11];
+	u8	d_conf;
+	u8	d_mask_ca;
+	u8	d_pll_del;
+	u8	pack10[16];
+	u8	t_conf_ca;
+	u8	t_mask_ca;
+	u8	pack11[13];
+	u8	m_def0;
+	u8	m_def1;
+	u8	m_def2;
+	u8	m_def3;
+	u8	m_def4;
+	u8	m_def5;
+	u8	m_def_trap0;
+	u8	m_def_trap1;
+	u8	m_def_trap2;
+	u8	m_def_trap3;
+	u8	m_def_trap4;
+	u8	m_def_trap5;
+	u8	m_mask_def0;
+	u8	m_mask_def1;
+	u8	m_mask_def2;
+	u8	m_mask_def3;
+	u8	m_mask_def4;
+	u8	m_mask_def5;
+	u8	m_def_mask0;
+	u8	m_def_mask1;
+	u8	m_def_mask2;
+	u8	m_def_mask3;
+	u8	m_def_mask4;
+	u8	m_def_mask5;
+	u8	m_def_pri;
+	u8	pack12[11];
+	u8	hw_status;
+	u8	pack13;
+	u8	hw_control1;
+	u8	hw_control2;
+	u8	hw_control3;
+	u8	pack14[7];
+	u8	led_on;		/* Leds */
+	u8	pack15;
+	u8	sfp_control;	/* SFP modules */
+	u8	pack16;
+	u8	alarm_control;	/* Alarm output */
+	u8	pack17;
+	u8	icps;		/* ICN clock pulse shaping */
+	u8	mswitch;	/* Read mode switch */
+	u8	pack18[6];
+	u8	pb_dbug;
+};
+
+#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET)
+#define CONFIG_PIGGY_MAC_ADRESS_OFFSET	0
+#endif
+
+int ethernet_present(void);
+int ivm_read_eeprom(void);
+
+int trigger_fpga_config(void);
+int wait_for_fpga_config(void);
+int fpga_reset(void);
+int toggle_eeprom_spi_bus(void);
+
+int set_km_env(void);
+int fdt_set_node_and_value(void *blob,
+			char *nodename,
+			char *regname,
+			void *var,
+			int size);
+int fdt_get_node_and_value(void *blob,
+				char *nodename,
+				char *propname,
+				void **var);
+
+#define DELAY_ABORT_SEQ		62  /* @200kHz 9 clocks = 44us, 62us is ok */
+#define DELAY_HALF_PERIOD	(500 / (CONFIG_SYS_I2C_SPEED / 1000))
+
+int i2c_soft_read_pin(void);
+int i2c_make_abort(void);
+#endif /* __KEYMILE_COMMON_H */
diff --git a/roms/u-boot/board/keymile/common/ivm.c b/roms/u-boot/board/keymile/common/ivm.c
new file mode 100644
index 00000000..f0e91bbd
--- /dev/null
+++ b/roms/u-boot/board/keymile/common/ivm.c
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <hush.h>
+#include <i2c.h>
+#include "common.h"
+
+static int ivm_calc_crc(unsigned char *buf, int len)
+{
+	const unsigned short crc_tab[16] = {
+		0x0000, 0xCC01, 0xD801, 0x1400,
+		0xF001, 0x3C00, 0x2800, 0xE401,
+		0xA001, 0x6C00, 0x7800, 0xB401,
+		0x5000, 0x9C01, 0x8801, 0x4400};
+
+	unsigned short crc     = 0;   /* final result */
+	unsigned short r1      = 0;   /* temp */
+	unsigned char  byte    = 0;   /* input buffer */
+	int	i;
+
+	/* calculate CRC from array data */
+	for (i = 0; i < len; i++) {
+		byte = buf[i];
+
+		/* lower 4 bits */
+		r1 = crc_tab[crc & 0xF];
+		crc = ((crc) >> 4) & 0x0FFF;
+		crc = crc ^ r1 ^ crc_tab[byte & 0xF];
+
+		/* upper 4 bits */
+		r1 = crc_tab[crc & 0xF];
+		crc = (crc >> 4) & 0x0FFF;
+		crc = crc ^ r1 ^ crc_tab[(byte >> 4) & 0xF];
+	}
+	return crc;
+}
+
+static int ivm_set_value(char *name, char *value)
+{
+	char tempbuf[256];
+
+	if (value != NULL) {
+		sprintf(tempbuf, "%s=%s", name, value);
+		return set_local_var(tempbuf, 0);
+	} else {
+		unset_local_var(name);
+	}
+	return 0;
+}
+
+static int ivm_get_value(unsigned char *buf, int len, char *name, int off,
+				int check)
+{
+	unsigned short	val;
+	unsigned char	valbuf[30];
+
+	if ((buf[off + 0] != buf[off + 2]) &&
+	    (buf[off + 2] != buf[off + 4])) {
+		printf("%s Error corrupted %s\n", __func__, name);
+		val = -1;
+	} else {
+		val = buf[off + 0] + (buf[off + 1] << 8);
+		if ((val == 0) && (check == 1))
+			val = -1;
+	}
+	sprintf((char *)valbuf, "%x", val);
+	ivm_set_value(name, (char *)valbuf);
+	return val;
+}
+
+#define INV_BLOCKSIZE		0x100
+#define INV_DATAADDRESS		0x21
+#define INVENTORYDATASIZE	(INV_BLOCKSIZE - INV_DATAADDRESS - 3)
+
+#define IVM_POS_SHORT_TEXT		0
+#define IVM_POS_MANU_ID			1
+#define IVM_POS_MANU_SERIAL		2
+#define IVM_POS_PART_NUMBER		3
+#define IVM_POS_BUILD_STATE		4
+#define IVM_POS_SUPPLIER_PART_NUMBER	5
+#define IVM_POS_DELIVERY_DATE		6
+#define IVM_POS_SUPPLIER_BUILD_STATE	7
+#define IVM_POS_CUSTOMER_ID		8
+#define IVM_POS_CUSTOMER_PROD_ID	9
+#define IVM_POS_HISTORY			10
+#define IVM_POS_SYMBOL_ONLY		11
+
+static char convert_char(char c)
+{
+	return (c < ' ' || c > '~') ? '.' : c;
+}
+
+static int ivm_findinventorystring(int type,
+					unsigned char *const string,
+					unsigned long maxlen,
+					unsigned char *buf)
+{
+	int xcode = 0;
+	unsigned long cr = 0;
+	unsigned long addr = INV_DATAADDRESS;
+	unsigned long size = 0;
+	unsigned long nr = type;
+	int stop = 0;	/* stop on semicolon */
+
+	memset(string, '\0', maxlen);
+	switch (type) {
+	case IVM_POS_SYMBOL_ONLY:
+		nr = 0;
+		stop = 1;
+	break;
+	default:
+		nr = type;
+		stop = 0;
+	}
+
+	/* Look for the requested number of CR. */
+	while ((cr != nr) && (addr < INVENTORYDATASIZE)) {
+		if ((buf[addr] == '\r'))
+			cr++;
+		addr++;
+	}
+
+	/*
+	 * the expected number of CR was found until the end of the IVM
+	 *  content --> fill string
+	 */
+	if (addr < INVENTORYDATASIZE) {
+		/* Copy the IVM string in the corresponding string */
+		for (; (buf[addr] != '\r')			&&
+			((buf[addr] != ';') ||  (!stop))	&&
+			(size < (maxlen - 1)			&&
+			(addr < INVENTORYDATASIZE)); addr++) {
+			size += sprintf((char *)string + size, "%c",
+						convert_char (buf[addr]));
+		}
+
+		/*
+		 * copy phase is done: check if everything is ok. If not,
+		 * the inventory data is most probably corrupted: tell
+		 * the world there is a problem!
+		 */
+		if (addr == INVENTORYDATASIZE) {
+			xcode = -1;
+			printf("Error end of string not found\n");
+		} else if ((size > (maxlen - 1)) &&
+			   (buf[addr] != '\r')) {
+			xcode = -1;
+			printf("string too long till next CR\n");
+		}
+	} else {
+		/*
+		 * some CR are missing...
+		 * the inventory data is most probably corrupted
+		 */
+		xcode = -1;
+		printf("not enough cr found\n");
+	}
+	return xcode;
+}
+
+#define GET_STRING(name, which, len) \
+	if (ivm_findinventorystring(which, valbuf, len, buf) == 0) { \
+		ivm_set_value(name, (char *)valbuf); \
+	}
+
+static int ivm_check_crc(unsigned char *buf, int block)
+{
+	unsigned long	crc;
+	unsigned long	crceeprom;
+
+	crc = ivm_calc_crc(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2);
+	crceeprom = (buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 1] + \
+			buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN - 2] * 256);
+	if (crc != crceeprom) {
+		if (block == 0)
+			printf("Error CRC Block: %d EEprom: calculated: \
+			%lx EEprom: %lx\n", block, crc, crceeprom);
+		return -1;
+	}
+	return 0;
+}
+
+static int calculate_mac_offset(unsigned char *valbuf, unsigned char *buf,
+				int offset)
+{
+	unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6];
+
+	if (offset == 0)
+		return 0;
+
+	val += offset;
+	buf[4] = (val >> 16) & 0xff;
+	buf[5] = (val >> 8) & 0xff;
+	buf[6] = val & 0xff;
+	sprintf((char *)valbuf, "%pM", buf + 1);
+	return 0;
+}
+
+static int ivm_analyze_block2(unsigned char *buf, int len)
+{
+	unsigned char	valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
+	unsigned long	count;
+
+	/* IVM_MAC Adress begins at offset 1 */
+	sprintf((char *)valbuf, "%pM", buf + 1);
+	ivm_set_value("IVM_MacAddress", (char *)valbuf);
+	/* if an offset is defined, add it */
+	calculate_mac_offset(buf, valbuf, CONFIG_PIGGY_MAC_ADRESS_OFFSET);
+#ifdef MACH_TYPE_KM_KIRKWOOD
+	setenv((char *)"ethaddr", (char *)valbuf);
+#else
+	if (getenv("ethaddr") == NULL)
+		setenv((char *)"ethaddr", (char *)valbuf);
+#endif
+#ifdef CONFIG_KMVECT1
+/* KMVECT1 has two ethernet interfaces */
+	if (getenv("eth1addr") == NULL) {
+		calculate_mac_offset(buf, valbuf, 1);
+		setenv((char *)"eth1addr", (char *)valbuf);
+	}
+#endif
+	/* IVM_MacCount */
+	count = (buf[10] << 24) +
+		   (buf[11] << 16) +
+		   (buf[12] << 8)  +
+		    buf[13];
+	if (count == 0xffffffff)
+		count = 1;
+	sprintf((char *)valbuf, "%lx", count);
+	ivm_set_value("IVM_MacCount", (char *)valbuf);
+	return 0;
+}
+
+static int ivm_analyze_eeprom(unsigned char *buf, int len)
+{
+	unsigned short	val;
+	unsigned char	valbuf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN];
+	unsigned char	*tmp;
+
+	if (ivm_check_crc(buf, 0) != 0)
+		return -1;
+
+	ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
+			"IVM_BoardId", 0, 1);
+	val = ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
+			"IVM_HWKey", 6, 1);
+	if (val != 0xffff) {
+		sprintf((char *)valbuf, "%x", ((val / 100) % 10));
+		ivm_set_value("IVM_HWVariant", (char *)valbuf);
+		sprintf((char *)valbuf, "%x", (val % 100));
+		ivm_set_value("IVM_HWVersion", (char *)valbuf);
+	}
+	ivm_get_value(buf, CONFIG_SYS_IVM_EEPROM_PAGE_LEN,
+		"IVM_Functions", 12, 0);
+
+	GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8)
+	GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64)
+	tmp = (unsigned char *) getenv("IVM_DeviceName");
+	if (tmp) {
+		int	len = strlen((char *)tmp);
+		int	i = 0;
+
+		while (i < len) {
+			if (tmp[i] == ';') {
+				ivm_set_value("IVM_ShortText",
+					(char *)&tmp[i + 1]);
+				break;
+			}
+			i++;
+		}
+		if (i >= len)
+			ivm_set_value("IVM_ShortText", NULL);
+	} else {
+		ivm_set_value("IVM_ShortText", NULL);
+	}
+	GET_STRING("IVM_ManufacturerID", IVM_POS_MANU_ID, 32)
+	GET_STRING("IVM_ManufacturerSerialNumber", IVM_POS_MANU_SERIAL, 20)
+	GET_STRING("IVM_ManufacturerPartNumber", IVM_POS_PART_NUMBER, 32)
+	GET_STRING("IVM_ManufacturerBuildState", IVM_POS_BUILD_STATE, 32)
+	GET_STRING("IVM_SupplierPartNumber", IVM_POS_SUPPLIER_PART_NUMBER, 32)
+	GET_STRING("IVM_DelieveryDate", IVM_POS_DELIVERY_DATE, 32)
+	GET_STRING("IVM_SupplierBuildState", IVM_POS_SUPPLIER_BUILD_STATE, 32)
+	GET_STRING("IVM_CustomerID", IVM_POS_CUSTOMER_ID, 32)
+	GET_STRING("IVM_CustomerProductID", IVM_POS_CUSTOMER_PROD_ID, 32)
+
+	if (ivm_check_crc(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2], 2) != 0)
+		return 0;
+	ivm_analyze_block2(&buf[CONFIG_SYS_IVM_EEPROM_PAGE_LEN * 2],
+		CONFIG_SYS_IVM_EEPROM_PAGE_LEN);
+
+	return 0;
+}
+
+int ivm_read_eeprom(void)
+{
+	uchar i2c_buffer[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
+	int ret;
+
+	i2c_set_bus_num(CONFIG_KM_IVM_BUS);
+	/* add deblocking here */
+	i2c_make_abort();
+
+	ret = i2c_read(CONFIG_SYS_IVM_EEPROM_ADR, 0, 1, i2c_buffer,
+		CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+	if (ret != 0) {
+		printf("Error reading EEprom\n");
+		return -2;
+	}
+
+	return ivm_analyze_eeprom(i2c_buffer, CONFIG_SYS_IVM_EEPROM_MAX_LEN);
+}
diff --git a/roms/u-boot/board/keymile/km82xx/Makefile b/roms/u-boot/board/keymile/km82xx/Makefile
new file mode 100644
index 00000000..20f193ab
--- /dev/null
+++ b/roms/u-boot/board/keymile/km82xx/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2001-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= km82xx.o ../common/common.o ../common/ivm.o
diff --git a/roms/u-boot/board/keymile/km82xx/km82xx.c b/roms/u-boot/board/keymile/km82xx/km82xx.c
new file mode 100644
index 00000000..dfbfab81
--- /dev/null
+++ b/roms/u-boot/board/keymile/km82xx/km82xx.c
@@ -0,0 +1,467 @@
+/*
+ * (C) Copyright 2007 - 2008
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <mpc8260.h>
+#include <ioports.h>
+#include <malloc.h>
+#include <asm/io.h>
+
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+
+#include <i2c.h>
+#include "../common/common.h"
+
+/*
+ * I/O Port configuration table
+ *
+ * if conf is 1, then that port pin will be configured at boot time
+ * according to the five values podr/pdir/ppar/psor/pdat for that entry
+ */
+const iop_conf_t iop_conf_tab[4][32] = {
+
+	/* Port A */
+	{	/*	      conf	ppar psor pdir podr pdat */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA31	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA30	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA29	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA28	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA27	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA26	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA25	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA24	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA23	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA22	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA21	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA20	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA19	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA18	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA17	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA16	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA15	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA14	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA13	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA12	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA11	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA10	     */
+		{ 1,		 1,   0,   1,	0,   0 }, /* PA9 SMC2 TxD    */
+		{ 1,		 1,   0,   0,	0,   0 }, /* PA8 SMC2 RxD    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA7	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA6	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA5	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA4	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA3	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA2	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PA1	     */
+		{ 0,		 0,   0,   0,	0,   0 }  /* PA0	     */
+	},
+
+	/* Port B */
+	{	/*	      conf	ppar psor pdir podr pdat */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB31	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB30	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB29	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB28	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB27	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB26	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB25	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB24	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB23	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB22	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB21	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB20	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB19	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PB18	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }  /* non-existent    */
+	},
+
+	/* Port C */
+	{	/*	      conf	ppar psor pdir podr pdat */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC31	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC30	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC29	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC28	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC27	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC26	     */
+		{ 1,		 1,   0,   0,	0,   0 }, /* PC25 RxClk      */
+		{ 1,		 1,   0,   0,	0,   0 }, /* PC24 TxClk      */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC23	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC22	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC21	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC20	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC19	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC18	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC17	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC16	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC15	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC14	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC13	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC12	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC11	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC10	     */
+		{ 1,		 1,   0,   0,	0,   0 }, /* PC9  SCC4: CTS  */
+		{ 1,		 1,   0,   0,	0,   0 }, /* PC8  SCC4: CD   */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC7	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC6	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC5	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC4	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC3	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC2	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC1	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PC0	     */
+	},
+
+	/* Port D */
+	{	/*	      conf	ppar psor pdir podr pdat */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD31	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD30	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD29	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD28	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD27	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD26	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD25	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD24	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD23	     */
+		{ 1,		 1,   0,   0,	0,   0 }, /* PD22 SCC4: RXD  */
+		{ 1,		 1,   0,   1,	0,   0 }, /* PD21 SCC4: TXD  */
+		{ 1,		 1,   0,   1,	0,   0 }, /* PD20 SCC4: RTS  */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD19	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD18	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD17	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD16	     */
+#if defined(CONFIG_HARD_I2C)
+		{ 1,		 1,   1,   0,	1,   0 }, /* PD15 I2C SDA    */
+		{ 1,		 1,   1,   0,	1,   0 }, /* PD14 I2C SCL    */
+#else
+		{ 1,		 0,   0,   0,	1,   1 }, /* PD15	     */
+		{ 1,		 0,   0,   1,	1,   1 }, /* PD14	     */
+#endif
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD13	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD12	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD11	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD10	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD9	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD8	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD7	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD6	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD5	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* PD4	     */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }, /* non-existent    */
+		{ 0,		 0,   0,   0,	0,   0 }  /* non-existent    */
+	}
+};
+
+/*
+ * Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
+ *
+ * This routine performs standard 8260 initialization sequence
+ * and calculates the available memory size. It may be called
+ * several times to try different SDRAM configurations on both
+ * 60x and local buses.
+ */
+static long int try_init(memctl8260_t *memctl, ulong sdmr,
+				  ulong orx, uchar *base)
+{
+	uchar c = 0xff;
+	ulong maxsize, size;
+	int i;
+
+	/*
+	 * We must be able to test a location outsize the maximum legal size
+	 * to find out THAT we are outside; but this address still has to be
+	 * mapped by the controller. That means, that the initial mapping has
+	 * to be (at least) twice as large as the maximum expected size.
+	 */
+	maxsize = (1 + (~orx | 0x7fff))/* / 2*/;
+
+	out_be32(&memctl->memc_or1, orx);
+
+	/*
+	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+	 *
+	 * "At system reset, initialization software must set up the
+	 *  programmable parameters in the memory controller banks registers
+	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+	 *  system software should execute the following initialization sequence
+	 *  for each SDRAM device.
+	 *
+	 *  1. Issue a PRECHARGE-ALL-BANKS command
+	 *  2. Issue eight CBR REFRESH commands
+	 *  3. Issue a MODE-SET command to initialize the mode register
+	 *
+	 *  The initial commands are executed by setting P/LSDMR[OP] and
+	 *  accessing the SDRAM with a single-byte transaction."
+	 *
+	 * The appropriate BRx/ORx registers have already been set when we
+	 * get here. The SDRAM can be accessed at the address
+	 * CONFIG_SYS_SDRAM_BASE.
+	 */
+
+	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_PREA);
+	out_8(base, c);
+
+	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_CBRR);
+	for (i = 0; i < 8; i++)
+		out_8(base, c);
+
+	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_MRW);
+	/* setting MR on address lines */
+	out_8((uchar *)(base + CONFIG_SYS_MRS_OFFS), c);
+
+	out_be32(&memctl->memc_psdmr, sdmr | PSDMR_OP_NORM | PSDMR_RFEN);
+	out_8(base, c);
+
+	size = get_ram_size((long *)base, maxsize);
+	out_be32(&memctl->memc_or1, orx | ~(size - 1));
+
+	return size;
+}
+
+#ifdef CONFIG_SYS_SDRAM_LIST
+
+/*
+ * If CONFIG_SYS_SDRAM_LIST is defined, we cycle through all SDRAM
+ * configurations therein (should be from high to lower) to find the
+ * one actually matching the current configuration.
+ * CONFIG_SYS_PSDMR and CONFIG_SYS_OR1 will contain the base values which are
+ * common among all possible configurations; values in CONFIG_SYS_SDRAM_LIST
+ * (defined as the initialization value for the array of struct sdram_conf_s)
+ * will then be ORed with such base values.
+ */
+
+struct sdram_conf_s {
+	ulong size;
+	int or1;
+	int psdmr;
+};
+
+static struct sdram_conf_s sdram_conf[] = CONFIG_SYS_SDRAM_LIST;
+
+static long probe_sdram(memctl8260_t *memctl)
+{
+	int n = 0;
+	long psize = 0;
+
+	for (n = 0; n < ARRAY_SIZE(sdram_conf); psize = 0, n++) {
+		psize = try_init(memctl,
+			CONFIG_SYS_PSDMR | sdram_conf[n].psdmr,
+			CONFIG_SYS_OR1 | sdram_conf[n].or1,
+			(uchar *) CONFIG_SYS_SDRAM_BASE);
+		debug("Probing %ld bytes returned %ld\n",
+			sdram_conf[n].size, psize);
+		if (psize == sdram_conf[n].size)
+			break;
+	}
+	return psize;
+}
+
+#else /* CONFIG_SYS_SDRAM_LIST */
+
+static long probe_sdram(memctl8260_t *memctl)
+{
+	return try_init(memctl, CONFIG_SYS_PSDMR, CONFIG_SYS_OR1,
+					(uchar *) CONFIG_SYS_SDRAM_BASE);
+}
+#endif /* CONFIG_SYS_SDRAM_LIST */
+
+
+phys_size_t initdram(int board_type)
+{
+	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	memctl8260_t *memctl = &immap->im_memctl;
+
+	long psize;
+
+	out_8(&memctl->memc_psrt, CONFIG_SYS_PSRT);
+	out_be16(&memctl->memc_mptpr, CONFIG_SYS_MPTPR);
+
+#ifndef CONFIG_SYS_RAMBOOT
+	/* 60x SDRAM setup:
+	 */
+	psize = probe_sdram(memctl);
+#endif /* CONFIG_SYS_RAMBOOT */
+
+	icache_enable();
+
+	return psize;
+}
+
+int checkboard(void)
+{
+#if defined(CONFIG_MGCOGE)
+	puts("Board: Keymile mgcoge");
+#else
+	puts("Board: Keymile mgcoge3ne");
+#endif
+	if (ethernet_present())
+		puts(" with PIGGY.");
+	puts("\n");
+	return 0;
+}
+
+int last_stage_init(void)
+{
+	struct bfticu_iomap *base =
+		(struct bfticu_iomap *)CONFIG_SYS_FPGA_BASE;
+	u8 dip_switch;
+
+	dip_switch = in_8(&base->mswitch);
+	dip_switch &= BFTICU_DIPSWITCH_MASK;
+	/* dip switch 'full reset' or 'db erase' */
+	if (dip_switch & 0x1 || dip_switch & 0x2) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+	set_km_env();
+	return 0;
+}
+
+#ifdef CONFIG_MGCOGE3NE
+static void set_pin(int state, unsigned long mask);
+
+/*
+ * For mgcoge3ne boards, the mgcoge3un control is controlled from
+ * a GPIO line on the PPC CPU. If bobcatreset is set the line
+ * will toggle once what forces the mgocge3un part to restart
+ * immediately.
+ */
+static void handle_mgcoge3un_reset(void)
+{
+	char *bobcatreset = getenv("bobcatreset");
+	if (bobcatreset) {
+		if (strcmp(bobcatreset, "true") == 0) {
+			puts("Forcing bobcat reset\n");
+			set_pin(0, 0x00000004);	/* clear PD29 to reset arm */
+			udelay(1000);
+			set_pin(1, 0x00000004);
+		} else
+			set_pin(1, 0x00000004);	/* set PD29 to not reset arm */
+	}
+}
+#endif
+
+int ethernet_present(void)
+{
+	struct km_bec_fpga *base =
+		(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
+
+	return in_8(&base->bprth) & PIGGY_PRESENT;
+}
+
+/*
+ * Early board initalization.
+ */
+int board_early_init_r(void)
+{
+	struct km_bec_fpga *base =
+		(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
+
+	/* setup the UPIOx */
+	/* General Unit Reset disabled, Flash Bank enabled, UnitLed on */
+	out_8(&base->oprth, (WRG_RESET | H_OPORTS_14 | WRG_LED));
+	/* SCC4 enable, halfduplex, FCC1 powerdown */
+	out_8(&base->oprtl, (H_OPORTS_SCC4_ENA | H_OPORTS_SCC4_FD_ENA |
+		H_OPORTS_FCC1_PW_DWN));
+
+#ifdef CONFIG_MGCOGE3NE
+	handle_mgcoge3un_reset();
+#endif
+	return 0;
+}
+
+int hush_init_var(void)
+{
+	ivm_read_eeprom();
+	return 0;
+}
+
+#define SDA_MASK	0x00010000
+#define SCL_MASK	0x00020000
+
+static void set_pin(int state, unsigned long mask)
+{
+	ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
+
+	if (state)
+		setbits_be32(&iop->pdat, mask);
+	else
+		clrbits_be32(&iop->pdat, mask);
+
+	setbits_be32(&iop->pdir, mask);
+}
+
+static int get_pin(unsigned long mask)
+{
+	ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
+
+	clrbits_be32(&iop->pdir, mask);
+	return 0 != (in_be32(&iop->pdat) & mask);
+}
+
+void set_sda(int state)
+{
+	set_pin(state, SDA_MASK);
+}
+
+void set_scl(int state)
+{
+	set_pin(state, SCL_MASK);
+}
+
+int get_sda(void)
+{
+	return get_pin(SDA_MASK);
+}
+
+int get_scl(void)
+{
+	return get_pin(SCL_MASK);
+}
+
+#if defined(CONFIG_HARD_I2C)
+static void setports(int gpio)
+{
+	ioport_t *iop = ioport_addr((immap_t *)CONFIG_SYS_IMMR, 3);
+
+	if (gpio) {
+		clrbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK));
+		clrbits_be32(&iop->podr, (SDA_MASK | SCL_MASK));
+	} else {
+		setbits_be32(&iop->ppar, (SDA_MASK | SCL_MASK));
+		clrbits_be32(&iop->pdir, (SDA_MASK | SCL_MASK));
+		setbits_be32(&iop->podr, (SDA_MASK | SCL_MASK));
+	}
+}
+#endif
+#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
diff --git a/roms/u-boot/board/keymile/km83xx/Makefile b/roms/u-boot/board/keymile/km83xx/Makefile
new file mode 100644
index 00000000..6c326885
--- /dev/null
+++ b/roms/u-boot/board/keymile/km83xx/Makefile
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= km83xx.o ../common/common.o ../common/ivm.o km83xx_i2c.o
diff --git a/roms/u-boot/board/keymile/km83xx/README.kmeter1 b/roms/u-boot/board/keymile/km83xx/README.kmeter1
new file mode 100644
index 00000000..7f4fc999
--- /dev/null
+++ b/roms/u-boot/board/keymile/km83xx/README.kmeter1
@@ -0,0 +1,91 @@
+Keymile kmeter1 Board
+-----------------------------------------
+1.	Alternative Boot EEPROM
+
+    Upon the kmeter1 startup the I2C_1 controller is used to fetch the boot
+    configuration from a serial EEPROM. During the development and debugging
+    phase it might be helpful to apply an alternative boot configuration in
+    a simple way. Therefore it is an alternative boot eeprom on the PIGGY,
+    which can be activated by setting the "ST" jumper on the PIGGY board.
+
+2.	Memory Map
+
+    BaseAddr    PortSz  Size  Device
+    ----------- ------  -----  ------
+    0x0000_0000 64 bit  256MB  DDR
+    0x8000_0000  8 bit  256KB  GPIO/PIGGY on CS1
+    0xa000_0000  8 bit  256MB  PAXE on CS3
+    0xe000_0000           2MB  Int Mem Reg Space
+    0xf000_0000 16 bit  256MB  FLASH on CS0
+
+
+    DDR-SDRAM:
+    The current realization is made with four 16-bits memory devices.
+    Mounting options have been foreseen for device architectures from
+    4Mx16 to 512Mx16. The kmeter1 is equipped with four 32Mx16 devices
+    thus resulting in a total capacity of 256MBytes.
+
+3. Compilation
+
+	Assuming you're using BASH shell:
+
+		export CROSS_COMPILE=your-cross-compile-prefix
+		cd u-boot
+		make distclean
+		make kmeter1_config
+		make
+
+4. Downloading and Flashing Images
+
+4.0 Download over serial line using Kermit:
+
+	loadb
+	[Drop to kermit:
+	    ^\c
+	    send <u-boot-bin-image>
+	    c
+	]
+
+
+    Or via tftp:
+
+	tftp 10000 u-boot.bin
+    => run load
+    Using UEC0 device
+    TFTP from server 192.168.1.1; our IP address is 192.168.205.4
+    Filename '/tftpboot/kmeter1/u-boot.bin'.
+    Load address: 0x200000
+    Loading: ##############
+    done
+    Bytes transferred = 204204 (31dac hex)
+    =>
+
+4.1 Reflash U-boot Image using U-boot
+
+    => run update
+    ..... done
+    Un-Protected 5 sectors
+
+    ..... done
+    Erased 5 sectors
+    Copy to Flash... done
+    ..... done
+    Protected 5 sectors
+    Total of 204204 bytes were the same
+    Saving Environment to Flash...
+    . done
+    Un-Protected 1 sectors
+    . done
+    Un-Protected 1 sectors
+    Erasing Flash...
+    . done
+    Erased 1 sectors
+    Writing to Flash... done
+    . done
+    Protected 1 sectors
+    . done
+    Protected 1 sectors
+    =>
+
+5. Notes
+	1) The console baudrate for kmeter1 is 115200bps.
diff --git a/roms/u-boot/board/keymile/km83xx/km83xx.c b/roms/u-boot/board/keymile/km83xx/km83xx.c
new file mode 100644
index 00000000..0543483d
--- /dev/null
+++ b/roms/u-boot/board/keymile/km83xx/km83xx.c
@@ -0,0 +1,410 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *                    Dave Liu <daveliu@freescale.com>
+ *
+ * Copyright (C) 2007 Logic Product Development, Inc.
+ *                    Peter Barada <peterb@logicpd.com>
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *                    Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * (C) Copyright 2008 - 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <pci.h>
+#include <libfdt.h>
+#include <post.h>
+
+#include "../common/common.h"
+
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* port pin dir open_drain assign */
+#if defined(CONFIG_MPC8360)
+	/* MDIO */
+	{0,  1, 3, 0, 2}, /* MDIO */
+	{0,  2, 1, 0, 1}, /* MDC */
+
+	/* UCC4 - UEC */
+	{1, 14, 1, 0, 1}, /* TxD0 */
+	{1, 15, 1, 0, 1}, /* TxD1 */
+	{1, 20, 2, 0, 1}, /* RxD0 */
+	{1, 21, 2, 0, 1}, /* RxD1 */
+	{1, 18, 1, 0, 1}, /* TX_EN */
+	{1, 26, 2, 0, 1}, /* RX_DV */
+	{1, 27, 2, 0, 1}, /* RX_ER */
+	{1, 24, 2, 0, 1}, /* COL */
+	{1, 25, 2, 0, 1}, /* CRS */
+	{2, 15, 2, 0, 1}, /* TX_CLK - CLK16 */
+	{2, 16, 2, 0, 1}, /* RX_CLK - CLK17 */
+
+	/* DUART - UART2 */
+	{5,  0, 1, 0, 2}, /* UART2_SOUT */
+	{5,  2, 1, 0, 1}, /* UART2_RTS */
+	{5,  3, 2, 0, 2}, /* UART2_SIN */
+	{5,  1, 2, 0, 3}, /* UART2_CTS */
+#elif !defined(CONFIG_MPC8309)
+	/* Local Bus */
+	{0, 16, 1, 0, 3}, /* LA00 */
+	{0, 17, 1, 0, 3}, /* LA01 */
+	{0, 18, 1, 0, 3}, /* LA02 */
+	{0, 19, 1, 0, 3}, /* LA03 */
+	{0, 20, 1, 0, 3}, /* LA04 */
+	{0, 21, 1, 0, 3}, /* LA05 */
+	{0, 22, 1, 0, 3}, /* LA06 */
+	{0, 23, 1, 0, 3}, /* LA07 */
+	{0, 24, 1, 0, 3}, /* LA08 */
+	{0, 25, 1, 0, 3}, /* LA09 */
+	{0, 26, 1, 0, 3}, /* LA10 */
+	{0, 27, 1, 0, 3}, /* LA11 */
+	{0, 28, 1, 0, 3}, /* LA12 */
+	{0, 29, 1, 0, 3}, /* LA13 */
+	{0, 30, 1, 0, 3}, /* LA14 */
+	{0, 31, 1, 0, 3}, /* LA15 */
+
+	/* MDIO */
+	{3,  4, 3, 0, 2}, /* MDIO */
+	{3,  5, 1, 0, 2}, /* MDC */
+
+	/* UCC4 - UEC */
+	{1, 18, 1, 0, 1}, /* TxD0 */
+	{1, 19, 1, 0, 1}, /* TxD1 */
+	{1, 22, 2, 0, 1}, /* RxD0 */
+	{1, 23, 2, 0, 1}, /* RxD1 */
+	{1, 26, 2, 0, 1}, /* RxER */
+	{1, 28, 2, 0, 1}, /* Rx_DV */
+	{1, 30, 1, 0, 1}, /* TxEN */
+	{1, 31, 2, 0, 1}, /* CRS */
+	{3, 10, 2, 0, 3}, /* TxCLK->CLK17 */
+#endif
+
+	/* END of table */
+	{0,  0, 0, 0, QE_IOP_TAB_END},
+};
+
+#if defined(CONFIG_SUVD3)
+const uint upma_table[] = {
+	0x1ffedc00, 0x0ffcdc80, 0x0ffcdc80, 0x0ffcdc04, /* Words 0 to 3 */
+	0x0ffcdc00, 0xffffcc00, 0xffffcc01, 0xfffffc01, /* Words 4 to 7 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 8 to 11 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 12 to 15 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 16 to 19 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 20 to 23 */
+	0x9cfffc00, 0x00fffc80, 0x00fffc80, 0x00fffc00, /* Words 24 to 27 */
+	0xffffec04, 0xffffec01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 32 to 35 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 36 to 39 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 40 to 43 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 44 to 47 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 48 to 51 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 52 to 55 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 56 to 59 */
+	0xfffffc01, 0xfffffc01, 0xfffffc01, 0xfffffc01  /* Words 60 to 63 */
+};
+#endif
+
+static int piggy_present(void)
+{
+	struct km_bec_fpga __iomem *base =
+		(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
+
+	return in_8(&base->bprth) & PIGGY_PRESENT;
+}
+
+#if defined(CONFIG_KMVECT1)
+int ethernet_present(void)
+{
+	/* ethernet port connected to simple switch without piggy */
+	return 1;
+}
+#else
+int ethernet_present(void)
+{
+	return piggy_present();
+}
+#endif
+
+
+int board_early_init_r(void)
+{
+	struct km_bec_fpga *base =
+		(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
+#if defined(CONFIG_SUVD3)
+	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+	fsl_lbc_t *lbc = &immap->im_lbc;
+	u32 *mxmr = &lbc->mamr;
+#endif
+
+#if defined(CONFIG_MPC8360)
+	unsigned short	svid;
+	/*
+	 * Because of errata in the UCCs, we have to write to the reserved
+	 * registers to slow the clocks down.
+	 */
+	svid =  SVR_REV(mfspr(SVR));
+	switch (svid) {
+	case 0x0020:
+		/*
+		 * MPC8360ECE.pdf QE_ENET10 table 4:
+		 * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
+		 * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
+		 */
+		setbits_be32((void *)(CONFIG_SYS_IMMR + 0x14a8), 0x0c003000);
+		break;
+	case 0x0021:
+		/*
+		 * MPC8360ECE.pdf QE_ENET10 table 4:
+		 * IMMR + 0x14AC[24:27] = 1010
+		 */
+		clrsetbits_be32((void *)(CONFIG_SYS_IMMR + 0x14ac),
+			0x00000050, 0x000000a0);
+		break;
+	}
+#endif
+
+	/* enable the PHY on the PIGGY */
+	setbits_8(&base->pgy_eth, 0x01);
+	/* enable the Unit LED (green) */
+	setbits_8(&base->oprth, WRL_BOOT);
+	/* enable Application Buffer */
+	setbits_8(&base->oprtl, OPRTL_XBUFENA);
+
+#if defined(CONFIG_SUVD3)
+	/* configure UPMA for APP1 */
+	upmconfig(UPMA, (uint *) upma_table,
+		sizeof(upma_table) / sizeof(uint));
+	out_be32(mxmr, CONFIG_SYS_MAMR);
+#endif
+	return 0;
+}
+
+int misc_init_r(void)
+{
+	return 0;
+}
+
+#if defined(CONFIG_KMVECT1)
+#include <mv88e6352.h>
+/* Marvell MV88E6122 switch configuration */
+static struct mv88e_sw_reg extsw_conf[] = {
+	/* port 1, FRONT_MDI, autoneg */
+	{ PORT(1), PORT_PHY, NO_SPEED_FOR },
+	{ PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	{ PHY(1), PHY_1000_CTRL, NO_ADV },
+	{ PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN },
+	{ PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
+		FULL_DUPLEX },
+	/* port 2, unused */
+	{ PORT(2), PORT_CTRL, PORT_DIS },
+	{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
+	{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+	/* port 3, BP_MII (CPU), PHY mode, 100BASE */
+	{ PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	/* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */
+	{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
+	{ PORT(4), PORT_PHY, SPEED_1000_FOR },
+	{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	/* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */
+	{ PORT(5), PORT_STATUS, NO_PHY_DETECT },
+	{ PORT(5), PORT_PHY, SPEED_1000_FOR },
+	{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	/*
+	 * Errata Fix: 1.9V Output from Internal 1.8V Regulator,
+	 * acc . MV-S300889-00D.pdf , clause 4.5
+	 */
+	{ PORT(5), 0x1A, 0xADB1 },
+	/* port 6, unused, this port has no phy */
+	{ PORT(6), PORT_CTRL, PORT_DIS },
+	/*
+	 * Errata Fix: 1.9V Output from Internal 1.8V Regulator,
+	 * acc . MV-S300889-00D.pdf , clause 4.5
+	 */
+	{ PORT(5), 0x1A, 0xADB1 },
+};
+#endif
+
+int last_stage_init(void)
+{
+#if defined(CONFIG_KMVECT1)
+	struct km_bec_fpga __iomem *base =
+		(struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE;
+	u8 tmp_reg;
+
+	/* Release mv88e6122 from reset */
+	tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */
+	out_8(&base->res1[0], tmp_reg);	       /* GP28 as output */
+	tmp_reg = in_8(&base->gprt3) | 0x10;   /* GP28 to high */
+	out_8(&base->gprt3, tmp_reg);
+
+	/* configure MV88E6122 switch */
+	char *name = "UEC2";
+
+	if (miiphy_set_current_dev(name))
+		return 0;
+
+	mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
+		ARRAY_SIZE(extsw_conf));
+
+	mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
+
+	if (piggy_present()) {
+		setenv("ethact", "UEC2");
+		setenv("netdev", "eth1");
+		puts("using PIGGY for network boot\n");
+	} else {
+		setenv("netdev", "eth0");
+		puts("using frontport for network boot\n");
+	}
+#endif
+
+#if defined(CONFIG_KMCOGE5NE)
+	struct bfticu_iomap *base =
+		(struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE;
+	u8 dip_switch = in_8((u8 *)&(base->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+	if (dip_switch != 0) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+#endif
+	set_km_env();
+	return 0;
+}
+
+static int fixed_sdram(void)
+{
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	u32 msize = 0;
+	u32 ddr_size;
+	u32 ddr_size_log2;
+
+	out_be32(&im->sysconf.ddrlaw[0].ar, (LAWAR_EN | 0x1e));
+	out_be32(&im->ddr.csbnds[0].csbnds, (CONFIG_SYS_DDR_CS0_BNDS) | 0x7f);
+	out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG);
+	out_be32(&im->ddr.timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
+	out_be32(&im->ddr.timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
+	out_be32(&im->ddr.timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+	out_be32(&im->ddr.timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
+	out_be32(&im->ddr.sdram_cfg, CONFIG_SYS_DDR_SDRAM_CFG);
+	out_be32(&im->ddr.sdram_cfg2, CONFIG_SYS_DDR_SDRAM_CFG2);
+	out_be32(&im->ddr.sdram_mode, CONFIG_SYS_DDR_MODE);
+	out_be32(&im->ddr.sdram_mode2, CONFIG_SYS_DDR_MODE2);
+	out_be32(&im->ddr.sdram_interval, CONFIG_SYS_DDR_INTERVAL);
+	out_be32(&im->ddr.sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CNTL);
+	udelay(200);
+	setbits_be32(&im->ddr.sdram_cfg, SDRAM_CFG_MEM_EN);
+
+	msize = CONFIG_SYS_DDR_SIZE << 20;
+	disable_addr_trans();
+	msize = get_ram_size(CONFIG_SYS_DDR_BASE, msize);
+	enable_addr_trans();
+	msize /= (1024 * 1024);
+	if (CONFIG_SYS_DDR_SIZE != msize) {
+		for (ddr_size = msize << 20, ddr_size_log2 = 0;
+			(ddr_size > 1);
+			ddr_size = ddr_size >> 1, ddr_size_log2++)
+			if (ddr_size & 1)
+				return -1;
+		out_be32(&im->sysconf.ddrlaw[0].ar,
+			(LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE)));
+		out_be32(&im->ddr.csbnds[0].csbnds,
+			(((msize / 16) - 1) & 0xff));
+	}
+
+	return msize;
+}
+
+phys_size_t initdram(int board_type)
+{
+	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
+	u32 msize = 0;
+
+	if ((in_be32(&im->sysconf.immrbar) & IMMRBAR_BASE_ADDR) != (u32)im)
+		return -1;
+
+	out_be32(&im->sysconf.ddrlaw[0].bar,
+		CONFIG_SYS_DDR_BASE & LAWBAR_BAR);
+	msize = fixed_sdram();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize DDR ECC byte
+	 */
+	ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return msize * 1024 * 1024;
+}
+
+int checkboard(void)
+{
+	puts("Board: Keymile " CONFIG_KM_BOARD_NAME);
+
+	if (piggy_present())
+		puts(" with PIGGY.");
+	puts("\n");
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+}
+#endif
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_read_eeprom();
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_POST)
+int post_hotkeys_pressed(void)
+{
+	int testpin = 0;
+	struct km_bec_fpga *base =
+		(struct km_bec_fpga *)CONFIG_SYS_KMBEC_FPGA_BASE;
+	int testpin_reg = in_8(&base->CONFIG_TESTPIN_REG);
+	testpin = (testpin_reg & CONFIG_TESTPIN_MASK) != 0;
+	debug("post_hotkeys_pressed: %d\n", !testpin);
+	return testpin;
+}
+
+ulong post_word_load(void)
+{
+	void* addr = (ulong *) (CPM_POST_WORD_ADDR);
+	debug("post_word_load 0x%08lX:  0x%08X\n", (ulong)addr, in_le32(addr));
+	return in_le32(addr);
+
+}
+void post_word_store(ulong value)
+{
+	void* addr = (ulong *) (CPM_POST_WORD_ADDR);
+	debug("post_word_store 0x%08lX: 0x%08lX\n", (ulong)addr, value);
+	out_le32(addr, value);
+}
+
+int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
+{
+	*vstart = CONFIG_SYS_MEMTEST_START;
+	*size = CONFIG_SYS_MEMTEST_END - CONFIG_SYS_MEMTEST_START;
+	debug("arch_memory_test_prepare 0x%08X 0x%08X\n", *vstart, *size);
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/board/keymile/km83xx/km83xx_i2c.c b/roms/u-boot/board/keymile/km83xx/km83xx_i2c.c
new file mode 100644
index 00000000..c9619375
--- /dev/null
+++ b/roms/u-boot/board/keymile/km83xx/km83xx_i2c.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2011
+ * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/io.h>
+#include <linux/ctype.h>
+#include "../common/common.h"
+
+static void i2c_write_start_seq(void)
+{
+	struct fsl_i2c *dev;
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
+	udelay(DELAY_ABORT_SEQ);
+	out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
+	udelay(DELAY_ABORT_SEQ);
+	out_8(&dev->cr, (I2C_CR_MEN));
+}
+
+int i2c_make_abort(void)
+{
+	struct fsl_i2c *dev;
+	dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET);
+	uchar   last;
+	int     nbr_read = 0;
+	int     i = 0;
+	int	    ret = 0;
+
+	/* wait after each operation to finsh with a delay */
+	out_8(&dev->cr, (I2C_CR_MSTA));
+	udelay(DELAY_ABORT_SEQ);
+	out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA));
+	udelay(DELAY_ABORT_SEQ);
+	in_8(&dev->dr);
+	udelay(DELAY_ABORT_SEQ);
+	last = in_8(&dev->dr);
+	nbr_read++;
+
+	/*
+	 * do read until the last bit is 1, but stop if the full eeprom is
+	 * read.
+	 */
+	while (((last & 0x01) != 0x01) &&
+		(nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) {
+		udelay(DELAY_ABORT_SEQ);
+		last = in_8(&dev->dr);
+		nbr_read++;
+	}
+	if ((last & 0x01) != 0x01)
+		ret = -2;
+	if ((last != 0xff) || (nbr_read > 1))
+		printf("[INFO] i2c abort after %d bytes (0x%02x)\n",
+			nbr_read, last);
+	udelay(DELAY_ABORT_SEQ);
+	out_8(&dev->cr, (I2C_CR_MEN));
+	udelay(DELAY_ABORT_SEQ);
+	/* clear status reg */
+	out_8(&dev->sr, 0);
+
+	for (i = 0; i < 5; i++)
+		i2c_write_start_seq();
+	if (ret != 0)
+		printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n",
+			nbr_read, last);
+
+	return ret;
+}
diff --git a/roms/u-boot/board/keymile/km_arm/Makefile b/roms/u-boot/board/keymile/km_arm/Makefile
new file mode 100644
index 00000000..a17d8d96
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Prafulla Wadaskar <prafulla@marvell.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= km_arm.o ../common/common.o ../common/ivm.o
+
+ifdef CONFIG_KM_FPGA_CONFIG
+obj-y	+= fpga_config.o
+endif
diff --git a/roms/u-boot/board/keymile/km_arm/fpga_config.c b/roms/u-boot/board/keymile/km_arm/fpga_config.c
new file mode 100644
index 00000000..51a3cfe6
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/fpga_config.c
@@ -0,0 +1,265 @@
+/*
+ * (C) Copyright 2012
+ * Valentin Lontgchamp, Keymile AG, valentin.longchamp@keymile.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <asm/errno.h>
+
+/* GPIO Pin from kirkwood connected to PROGRAM_B pin of the xilinx FPGA */
+#define KM_XLX_PROGRAM_B_PIN    39
+
+#define BOCO_ADDR	0x10
+
+#define ID_REG		0x00
+#define BOCO2_ID	0x5b
+
+static int check_boco2(void)
+{
+	int ret;
+	u8 id;
+
+	ret = i2c_read(BOCO_ADDR, ID_REG, 1, &id, 1);
+	if (ret) {
+		printf("%s: error reading the BOCO id !!\n", __func__);
+		return ret;
+	}
+
+	return (id == BOCO2_ID);
+}
+
+static int boco_clear_bits(u8 reg, u8 flags)
+{
+	int ret;
+	u8 regval;
+
+	/* give access to the EEPROM from FPGA */
+	ret = i2c_read(BOCO_ADDR, reg, 1, &regval, 1);
+	if (ret) {
+		printf("%s: error reading the BOCO @%#x !!\n",
+			__func__, reg);
+		return ret;
+	}
+	regval &= ~flags;
+	ret = i2c_write(BOCO_ADDR, reg, 1, &regval, 1);
+	if (ret) {
+		printf("%s: error writing the BOCO @%#x !!\n",
+			__func__, reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int boco_set_bits(u8 reg, u8 flags)
+{
+	int ret;
+	u8 regval;
+
+	/* give access to the EEPROM from FPGA */
+	ret = i2c_read(BOCO_ADDR, reg, 1, &regval, 1);
+	if (ret) {
+		printf("%s: error reading the BOCO @%#x !!\n",
+			__func__, reg);
+		return ret;
+	}
+	regval |= flags;
+	ret = i2c_write(BOCO_ADDR, reg, 1, &regval, 1);
+	if (ret) {
+		printf("%s: error writing the BOCO @%#x !!\n",
+			__func__, reg);
+		return ret;
+	}
+
+	return 0;
+}
+
+#define SPI_REG		0x06
+#define CFG_EEPROM	0x02
+#define FPGA_PROG	0x04
+#define FPGA_INIT_B	0x10
+#define FPGA_DONE	0x20
+
+static int fpga_done(void)
+{
+	int ret = 0;
+	u8 regval;
+
+	/* this is only supported with the boco2 design */
+	if (!check_boco2())
+		return 0;
+
+	ret = i2c_read(BOCO_ADDR, SPI_REG, 1, &regval, 1);
+	if (ret) {
+		printf("%s: error reading the BOCO @%#x !!\n",
+			__func__, SPI_REG);
+		return 0;
+	}
+
+	return regval & FPGA_DONE ? 1 : 0;
+}
+
+int skip;
+
+int trigger_fpga_config(void)
+{
+	int ret = 0;
+
+	/* if the FPGA is already configured, we do not want to
+	 * reconfigure it */
+	skip = 0;
+	if (fpga_done()) {
+		printf("PCIe FPGA config: skipped\n");
+		skip = 1;
+		return 0;
+	}
+
+	if (check_boco2()) {
+		/* we have a BOCO2, this has to be triggered here */
+
+		/* make sure the FPGA_can access the EEPROM */
+		ret = boco_clear_bits(SPI_REG, CFG_EEPROM);
+		if (ret)
+			return ret;
+
+		/* trigger the config start */
+		ret = boco_clear_bits(SPI_REG, FPGA_PROG | FPGA_INIT_B);
+		if (ret)
+			return ret;
+
+		/* small delay for the pulse */
+		udelay(10);
+
+		/* up signal for pulse end */
+		ret = boco_set_bits(SPI_REG, FPGA_PROG);
+		if (ret)
+			return ret;
+
+		/* finally, raise INIT_B to remove the config delay */
+		ret = boco_set_bits(SPI_REG, FPGA_INIT_B);
+		if (ret)
+			return ret;
+
+	} else {
+		/* we do it the old way, with the gpio pin */
+		kw_gpio_set_valid(KM_XLX_PROGRAM_B_PIN, 1);
+		kw_gpio_direction_output(KM_XLX_PROGRAM_B_PIN, 0);
+		/* small delay for the pulse */
+		udelay(10);
+		kw_gpio_direction_input(KM_XLX_PROGRAM_B_PIN);
+	}
+
+	return 0;
+}
+
+int wait_for_fpga_config(void)
+{
+	int ret = 0;
+	u8 spictrl;
+	u32 timeout = 20000;
+
+	if (skip)
+		return 0;
+
+	if (!check_boco2()) {
+		/* we do not have BOCO2, this is not really used */
+		return 0;
+	}
+
+	printf("PCIe FPGA config:");
+	do {
+		ret = i2c_read(BOCO_ADDR, SPI_REG, 1, &spictrl, 1);
+		if (ret) {
+			printf("%s: error reading the BOCO spictrl !!\n",
+				__func__);
+			return ret;
+		}
+		if (timeout-- == 0) {
+			printf(" FPGA_DONE timeout\n");
+			return -EFAULT;
+		}
+		udelay(10);
+	} while (!(spictrl & FPGA_DONE));
+
+	printf(" done\n");
+
+	return 0;
+}
+
+#if defined(KM_PCIE_RESET_MPP7)
+
+#define KM_PEX_RST_GPIO_PIN	7
+int fpga_reset(void)
+{
+	if (!check_boco2()) {
+		/* we do not have BOCO2, this is not really used */
+		return 0;
+	}
+
+	printf("PCIe reset through GPIO7: ");
+	/* apply PCIe reset via GPIO */
+	kw_gpio_set_valid(KM_PEX_RST_GPIO_PIN, 1);
+	kw_gpio_direction_output(KM_PEX_RST_GPIO_PIN, 1);
+	kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 0);
+	udelay(1000*10);
+	kw_gpio_set_value(KM_PEX_RST_GPIO_PIN, 1);
+
+	printf(" done\n");
+
+	return 0;
+}
+
+#else
+
+#define PRST1		0x4
+#define PCIE_RST	0x10
+#define TRAFFIC_RST	0x04
+
+int fpga_reset(void)
+{
+	int ret = 0;
+	u8 resets;
+
+	if (!check_boco2()) {
+		/* we do not have BOCO2, this is not really used */
+		return 0;
+	}
+
+	/* if we have skipped, we only want to reset the PCIe part */
+	resets = skip ? PCIE_RST : PCIE_RST | TRAFFIC_RST;
+
+	ret = boco_clear_bits(PRST1, resets);
+	if (ret)
+		return ret;
+
+	/* small delay for the pulse */
+	udelay(10);
+
+	ret = boco_set_bits(PRST1, resets);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+#endif
+
+/* the FPGA was configured, we configure the BOCO2 so that the EEPROM
+ * is available from the Bobcat SPI bus */
+int toggle_eeprom_spi_bus(void)
+{
+	int ret = 0;
+
+	if (!check_boco2()) {
+		/* we do not have BOCO2, this is not really used */
+		return 0;
+	}
+
+	ret = boco_set_bits(SPI_REG, CFG_EEPROM);
+	if (ret)
+		return ret;
+
+	return 0;
+}
diff --git a/roms/u-boot/board/keymile/km_arm/km_arm.c b/roms/u-boot/board/keymile/km_arm/km_arm.c
new file mode 100644
index 00000000..35402c80
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/km_arm.c
@@ -0,0 +1,495 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2010
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <nand.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+
+#include "../common/common.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * BOCO FPGA definitions
+ */
+#define BOCO		0x10
+#define REG_CTRL_H		0x02
+#define MASK_WRL_UNITRUN	0x01
+#define MASK_RBX_PGY_PRESENT	0x40
+#define REG_IRQ_CIRQ2		0x2d
+#define MASK_RBI_DEFECT_16	0x01
+
+/* Multi-Purpose Pins Functionality configuration */
+static const u32 kwmpp_config[] = {
+	MPP0_NF_IO2,
+	MPP1_NF_IO3,
+	MPP2_NF_IO4,
+	MPP3_NF_IO5,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+#if defined(KM_PCIE_RESET_MPP7)
+	MPP7_GPO,
+#else
+	MPP7_PEX_RST_OUTn,
+#endif
+#if defined(CONFIG_SYS_I2C_SOFT)
+	MPP8_GPIO,		/* SDA */
+	MPP9_GPIO,		/* SCL */
+#endif
+#if defined(CONFIG_HARD_I2C)
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+#endif
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Reserved */
+	MPP13_UART1_TXD,
+	MPP14_UART1_RXD,
+	MPP15_GPIO,		/* Not used */
+	MPP16_GPIO,		/* Not used */
+	MPP17_GPIO,		/* Reserved */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_GPIO,
+	MPP21_GPIO,
+	MPP22_GPIO,
+	MPP23_GPIO,
+	MPP24_GPIO,
+	MPP25_GPIO,
+	MPP26_GPIO,
+	MPP27_GPIO,
+	MPP28_GPIO,
+	MPP29_GPIO,
+	MPP30_GPIO,
+	MPP31_GPIO,
+	MPP32_GPIO,
+	MPP33_GPIO,
+	MPP34_GPIO,		/* CDL1 (input) */
+	MPP35_GPIO,		/* CDL2 (input) */
+	MPP36_GPIO,		/* MAIN_IRQ (input) */
+	MPP37_GPIO,		/* BOARD_LED */
+	MPP38_GPIO,		/* Piggy3 LED[1] */
+	MPP39_GPIO,		/* Piggy3 LED[2] */
+	MPP40_GPIO,		/* Piggy3 LED[3] */
+	MPP41_GPIO,		/* Piggy3 LED[4] */
+	MPP42_GPIO,		/* Piggy3 LED[5] */
+	MPP43_GPIO,		/* Piggy3 LED[6] */
+	MPP44_GPIO,		/* Piggy3 LED[7], BIST_EN_L */
+	MPP45_GPIO,		/* Piggy3 LED[8] */
+	MPP46_GPIO,		/* Reserved */
+	MPP47_GPIO,		/* Reserved */
+	MPP48_GPIO,		/* Reserved */
+	MPP49_GPIO,		/* SW_INTOUTn */
+	0
+};
+
+#if defined(CONFIG_KM_MGCOGE3UN)
+/*
+ * Wait for startup OK from mgcoge3ne
+ */
+static int startup_allowed(void)
+{
+	unsigned char buf;
+
+	/*
+	 * Read CIRQ16 bit (bit 0)
+	 */
+	if (i2c_read(BOCO, REG_IRQ_CIRQ2, 1, &buf, 1) != 0)
+		printf("%s: Error reading Boco\n", __func__);
+	else
+		if ((buf & MASK_RBI_DEFECT_16) == MASK_RBI_DEFECT_16)
+			return 1;
+	return 0;
+}
+#endif
+
+#if (defined(CONFIG_KM_PIGGY4_88E6061)|defined(CONFIG_KM_PIGGY4_88E6352))
+/*
+ * All boards with PIGGY4 connected via a simple switch have ethernet always
+ * present.
+ */
+int ethernet_present(void)
+{
+	return 1;
+}
+#else
+int ethernet_present(void)
+{
+	uchar	buf;
+	int	ret = 0;
+
+	if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
+		printf("%s: Error reading Boco\n", __func__);
+		return -1;
+	}
+	if ((buf & MASK_RBX_PGY_PRESENT) == MASK_RBX_PGY_PRESENT)
+		ret = 1;
+
+	return ret;
+}
+#endif
+
+static int initialize_unit_leds(void)
+{
+	/*
+	 * Init the unit LEDs per default they all are
+	 * ok apart from bootstat
+	 */
+	uchar buf;
+
+	if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
+		printf("%s: Error reading Boco\n", __func__);
+		return -1;
+	}
+	buf |= MASK_WRL_UNITRUN;
+	if (i2c_write(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
+		printf("%s: Error writing Boco\n", __func__);
+		return -1;
+	}
+	return 0;
+}
+
+static void set_bootcount_addr(void)
+{
+	uchar buf[32];
+	unsigned int bootcountaddr;
+	bootcountaddr = gd->ram_size - BOOTCOUNT_ADDR;
+	sprintf((char *)buf, "0x%x", bootcountaddr);
+	setenv("bootcountaddr", (char *)buf);
+}
+
+int misc_init_r(void)
+{
+#if defined(CONFIG_KM_MGCOGE3UN)
+	char *wait_for_ne;
+	wait_for_ne = getenv("waitforne");
+	if (wait_for_ne != NULL) {
+		if (strcmp(wait_for_ne, "true") == 0) {
+			int cnt = 0;
+			int abort = 0;
+			puts("NE go: ");
+			while (startup_allowed() == 0) {
+				if (tstc()) {
+					(void) getc(); /* consume input */
+					abort = 1;
+					break;
+				}
+				udelay(200000);
+				cnt++;
+				if (cnt == 5)
+					puts("wait\b\b\b\b");
+				if (cnt == 10) {
+					cnt = 0;
+					puts("    \b\b\b\b");
+				}
+			}
+			if (abort == 1)
+				printf("\nAbort waiting for ne\n");
+			else
+				puts("OK\n");
+		}
+	}
+#endif
+
+	initialize_unit_leds();
+	set_km_env();
+	set_bootcount_addr();
+	return 0;
+}
+
+int board_early_init_f(void)
+{
+#if defined(CONFIG_SYS_I2C_SOFT)
+	u32 tmp;
+
+	/* set the 2 bitbang i2c pins as output gpios */
+	tmp = readl(KW_GPIO0_BASE + 4);
+	writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4);
+#endif
+	/* adjust SDRAM size for bank 0 */
+	kw_sdram_size_adjust(0);
+	kirkwood_mpp_conf(kwmpp_config, NULL);
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+	/*
+	 * The KM_FLASH_GPIO_PIN switches between using a
+	 * NAND or a SPI FLASH. Set this pin on start
+	 * to NAND mode.
+	 */
+	kw_gpio_set_valid(KM_FLASH_GPIO_PIN, 1);
+	kw_gpio_direction_output(KM_FLASH_GPIO_PIN, 1);
+
+#if defined(CONFIG_SYS_I2C_SOFT)
+	/*
+	 * Reinit the GPIO for I2C Bitbang driver so that the now
+	 * available gpio framework is consistent. The calls to
+	 * direction output in are not necessary, they are already done in
+	 * board_early_init_f
+	 */
+	kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1);
+	kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1);
+#endif
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+	kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38);
+	kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1);
+#endif
+
+#if defined(CONFIG_KM_FPGA_CONFIG)
+	trigger_fpga_config();
+#endif
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+#if defined(CONFIG_KMCOGE5UN)
+/* I/O pin to erase flash RGPP09 = MPP43 */
+#define KM_FLASH_ERASE_ENABLE	43
+	u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE);
+
+	/* if pin 1 do full erase */
+	if (dip_switch != 0) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+#endif
+
+#if defined(CONFIG_KM_FPGA_CONFIG)
+	wait_for_fpga_config();
+	fpga_reset();
+	toggle_eeprom_spi_bus();
+#endif
+	return 0;
+}
+
+int board_spi_claim_bus(struct spi_slave *slave)
+{
+	kw_gpio_set_value(KM_FLASH_GPIO_PIN, 0);
+
+	return 0;
+}
+
+void board_spi_release_bus(struct spi_slave *slave)
+{
+	kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1);
+}
+
+#if (defined(CONFIG_KM_PIGGY4_88E6061))
+
+#define	PHY_LED_SEL_REG		0x18
+#define PHY_LED0_LINK		(0x5)
+#define PHY_LED1_ACT		(0x8<<4)
+#define PHY_LED2_INT		(0xe<<8)
+#define	PHY_SPEC_CTRL_REG	0x1c
+#define PHY_RGMII_CLK_STABLE	(0x1<<10)
+#define PHY_CLSA		(0x1<<1)
+
+/* Configure and enable MV88E3018 PHY */
+void reset_phy(void)
+{
+	char *name = "egiga0";
+	unsigned short reg;
+
+	if (miiphy_set_current_dev(name))
+		return;
+
+	/* RGMII clk transition on data stable */
+	if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG, &reg))
+		printf("Error reading PHY spec ctrl reg\n");
+	if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL_REG,
+			 reg | PHY_RGMII_CLK_STABLE | PHY_CLSA))
+		printf("Error writing PHY spec ctrl reg\n");
+
+	/* leds setup */
+	if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL_REG,
+			 PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT))
+		printf("Error writing PHY LED reg\n");
+
+	/* reset the phy */
+	miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+}
+#elif defined(CONFIG_KM_PIGGY4_88E6352)
+
+#include <mv88e6352.h>
+
+#if defined(CONFIG_KM_NUSA)
+struct mv88e_sw_reg extsw_conf[] = {
+	/*
+	 * port 0, PIGGY4, autoneg
+	 * first the fix for the 1000Mbits Autoneg, this is from
+	 * a Marvell errata, the regs are undocumented
+	 */
+	{ PHY(0), PHY_PAGE, AN1000FIX_PAGE },
+	{ PHY(0), PHY_STATUS, AN1000FIX },
+	{ PHY(0), PHY_PAGE, 0 },
+	/* now the real port and phy configuration */
+	{ PORT(0), PORT_PHY, NO_SPEED_FOR },
+	{ PORT(0), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	{ PHY(0), PHY_1000_CTRL, NO_ADV },
+	{ PHY(0), PHY_SPEC_CTRL, AUTO_MDIX_EN },
+	{ PHY(0), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
+		FULL_DUPLEX },
+	/* port 1, unused */
+	{ PORT(1), PORT_CTRL, PORT_DIS },
+	{ PHY(1), PHY_CTRL, PHY_PWR_DOWN },
+	{ PHY(1), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+	/* port 2, unused */
+	{ PORT(2), PORT_CTRL, PORT_DIS },
+	{ PHY(2), PHY_CTRL, PHY_PWR_DOWN },
+	{ PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+	/* port 3, unused */
+	{ PORT(3), PORT_CTRL, PORT_DIS },
+	{ PHY(3), PHY_CTRL, PHY_PWR_DOWN },
+	{ PHY(3), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+	/* port 4, ICNEV, SerDes, SGMII */
+	{ PORT(4), PORT_STATUS, NO_PHY_DETECT },
+	{ PORT(4), PORT_PHY, SPEED_1000_FOR },
+	{ PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	{ PHY(4), PHY_CTRL, PHY_PWR_DOWN },
+	{ PHY(4), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+	/* port 5, CPU_RGMII */
+	{ PORT(5), PORT_PHY, RX_RGMII_TIM | TX_RGMII_TIM | FLOW_CTRL_EN |
+		FLOW_CTRL_FOR | LINK_VAL | LINK_FOR | FULL_DPX |
+		FULL_DPX_FOR | SPEED_1000_FOR },
+	{ PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+	/* port 6, unused, this port has no phy */
+	{ PORT(6), PORT_CTRL, PORT_DIS },
+};
+#else
+struct mv88e_sw_reg extsw_conf[] = {};
+#endif
+
+void reset_phy(void)
+{
+#if defined(CONFIG_KM_MVEXTSW_ADDR)
+	char *name = "egiga0";
+
+	if (miiphy_set_current_dev(name))
+		return;
+
+	mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
+		ARRAY_SIZE(extsw_conf));
+	mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
+#endif
+}
+
+#else
+/* Configure and enable MV88E1118 PHY on the piggy*/
+void reset_phy(void)
+{
+	char *name = "egiga0";
+
+	if (miiphy_set_current_dev(name))
+		return;
+
+	/* reset the phy */
+	miiphy_reset(name, CONFIG_PHY_BASE_ADR);
+}
+#endif
+
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_read_eeprom();
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SYS_I2C_SOFT)
+void set_sda(int state)
+{
+	I2C_ACTIVE;
+	I2C_SDA(state);
+}
+
+void set_scl(int state)
+{
+	I2C_SCL(state);
+}
+
+int get_sda(void)
+{
+	I2C_TRISTATE;
+	return I2C_READ;
+}
+
+int get_scl(void)
+{
+	return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0;
+}
+#endif
+
+#if defined(CONFIG_POST)
+
+#define KM_POST_EN_L	44
+#define POST_WORD_OFF	8
+
+int post_hotkeys_pressed(void)
+{
+#if defined(CONFIG_KM_COGE5UN)
+	return kw_gpio_get_value(KM_POST_EN_L);
+#else
+	return !kw_gpio_get_value(KM_POST_EN_L);
+#endif
+}
+
+ulong post_word_load(void)
+{
+	void* addr = (void *) (gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF);
+	return in_le32(addr);
+
+}
+void post_word_store(ulong value)
+{
+	void* addr = (void *) (gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF);
+	out_le32(addr, value);
+}
+
+int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
+{
+	*vstart = CONFIG_SYS_SDRAM_BASE;
+
+	/* we go up to relocation plus a 1 MB margin */
+	*size = CONFIG_SYS_TEXT_BASE - (1<<20);
+
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+	kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state);
+
+	return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP);
+}
+#endif
diff --git a/roms/u-boot/board/keymile/km_arm/kwbimage-memphis.cfg b/roms/u-boot/board/keymile/km_arm/kwbimage-memphis.cfg
new file mode 100644
index 00000000..e910f421
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/kwbimage-memphis.cfg
@@ -0,0 +1,181 @@
+#
+# (C) Copyright 2010
+# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# (C) Copyright 2011
+# Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Refer doc/README.kwbimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+DATA 0xFFD10000 0x01112222	# MPP Control 0 Register
+# bit 3-0:   MPPSel0	2, NF_IO[2]
+# bit 7-4:   MPPSel1	2, NF_IO[3]
+# bit 12-8:  MPPSel2	2, NF_IO[4]
+# bit 15-12: MPPSel3	2, NF_IO[5]
+# bit 19-16: MPPSel4	1, NF_IO[6]
+# bit 23-20: MPPSel5	1, NF_IO[7]
+# bit 27-24: MPPSel6	1, SYSRST_O
+# bit 31-28: MPPSel7	0, GPO[7]
+
+DATA 0xFFD10004 0x03303300
+
+DATA 0xFFD10008 0x00001100	# MPP Control 2 Register
+# bit 3-0:   MPPSel16	0, GPIO[16]
+# bit 7-4:   MPPSel17	0, GPIO[17]
+# bit 12-8:  MPPSel18	1, NF_IO[0]
+# bit 15-12: MPPSel19	1, NF_IO[1]
+# bit 19-16: MPPSel20	0, GPIO[20]
+# bit 23-20: MPPSel21	0, GPIO[21]
+# bit 27-24: MPPSel22	0, GPIO[22]
+# bit 31-28: MPPSel23	0, GPIO[23]
+
+DATA 0xFFD100E0 0x1B1B1B1B	# IO Configuration 0 Register
+DATA 0xFFD20134 0x66666666	# L2 RAM Timing 0 Register
+DATA 0xFFD20138 0x66666666	# L2 RAM Timing 1 Register
+
+# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched!
+# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage
+
+#Dram initalization
+DATA 0xFFD01400 0x430004E0	# SDRAM Configuration Register
+# bit13-0:  0x4E0 (DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x38543000	# DDR Controller Control Low
+# bit 3-0:  0 reserved
+# bit 4:    0=addr/cmd in smame cycle
+# bit 5:    0=clk is driven during self refresh, we don't care for APX
+# bit 6:    0=use recommended falling edge of clk for addr/cmd
+# bit14:    0=input buffer always powered up
+# bit18:    1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=4 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 8= CL+4, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31:    0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x2302433E	# DDR Timing (Low) (active cycles value +1)
+# bit3-0:   TRAS lsbs
+# bit7-4:   TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20:    TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000A3E	#  DDR Timing (High)
+# bit6-0:   TRFC
+# bit8-7:   TR2R
+# bit10-9:  TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x00000001	#  DDR Address Control
+# bit1-0:   01, Cs0width=x16
+# bit3-2:   00, Cs0size=2Gb
+# bit5-4:   00, Cs2width=nonexistent
+# bit7-6:   00, Cs1size =nonexistent
+# bit9-8:   00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16:    0,  Cs0AddrSel
+# bit17:    0,  Cs1AddrSel
+# bit18:    0,  Cs2AddrSel
+# bit19:    0,  Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
+# bit0:    0,  OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000	#  DDR Operation
+# bit3-0:   0x0, DDR cmd
+# bit31-4:  0 required
+
+DATA 0xFFD0141C 0x00000652	#  DDR Mode
+DATA 0xFFD01420 0x00000006	#  DDR Extended Mode
+# bit0:    0,  DDR DLL enabled
+# bit1:    1,  DDR drive strenght reduced
+# bit2:    1,  DDR ODT control lsd disabled
+# bit5-3:  000, required
+# bit6:    0,  DDR ODT control msb disabled
+# bit9-7:  000, required
+# bit10:   0,  differential DQS enabled
+# bit11:   0, required
+# bit12:   0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F17F	#  DDR Controller Control High
+# bit2-0:  111, required
+# bit3  :  1  , MBUS Burst Chop disabled
+# bit6-4:  111, required
+# bit7  :  0
+# bit8  :  1  , add a sample stage
+# bit9  :  0  , no half clock cycle addition to dataout
+# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0    required
+
+DATA 0xFFD01428 0x00084520	# DDR2 SDRAM Timing Low
+# bit3-0  : 0000, required
+# bit7-4  : 0010, M_ODT assertion 2 cycles after read
+# bit11-8 : 0101, M_ODT de-assertion 5 cycles after read
+# bit15-12: 0100, internal ODT assertion 4 cycles after read
+# bit19-16: 1000, internal ODT de-assertion 8 cycles after read
+# bit31-20: 0   , required
+
+DATA 0xFFD0147c 0x00008451	# DDR2 SDRAM Timing High
+# bit3-0  : 0001, M_ODT assertion same cycle as write
+# bit7-4  : 0101, M_ODT de-assertion x cycles after write
+# bit11-8 : 0100, internal ODT assertion x cycles after write
+# bit15-12: 1000, internal ODT de-assertion x cycles after write
+
+DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x0FFFFFF1	# CS[0]n Size
+# bit0:    1,  Window enabled
+# bit1:    0,  Write Protect disabled
+# bit3-2:  00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x0F, Size (i.e. 256MB)
+
+DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00010000	#  DDR ODT Control (Low)
+# bit3-0:  0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0
+# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
+# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
+# bit3-2:  00, ODT1 controlled by register
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000F801	# CPU ODT Control
+# bit3-0:  1, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit7-4:  0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0
+# bit9-8:  0, ODTEn, controlled by ODT0Rd and ODT0Wr
+# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm
+# bit13-12:3, STARTBURST ODT buffer selected, 50 ohm
+# bit14   :1, STARTBURST ODT enabled
+# bit15   :1, Use ODT Block
+
+DATA 0xFFD01480 0x00000001	# DDR Initialization Control
+# bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/roms/u-boot/board/keymile/km_arm/kwbimage.cfg b/roms/u-boot/board/keymile/km_arm/kwbimage.cfg
new file mode 100644
index 00000000..ce2c3e29
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/kwbimage.cfg
@@ -0,0 +1,163 @@
+#
+# (C) Copyright 2010
+# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Refer doc/README.kwbimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+DATA 0xFFD10000 0x01112222	# MPP Control 0 Register
+# bit 3-0:   MPPSel0	2, NF_IO[2]
+# bit 7-4:   MPPSel1	2, NF_IO[3]
+# bit 12-8:  MPPSel2	2, NF_IO[4]
+# bit 15-12: MPPSel3	2, NF_IO[5]
+# bit 19-16: MPPSel4	1, NF_IO[6]
+# bit 23-20: MPPSel5	1, NF_IO[7]
+# bit 27-24: MPPSel6	1, SYSRST_O
+# bit 31-28: MPPSel7	0, GPO[7]
+
+DATA 0xFFD10004 0x03303300
+
+DATA 0xFFD10008 0x00001100	# MPP Control 2 Register
+# bit 3-0:   MPPSel16	0, GPIO[16]
+# bit 7-4:   MPPSel17	0, GPIO[17]
+# bit 12-8:  MPPSel18	1, NF_IO[0]
+# bit 15-12: MPPSel19	1, NF_IO[1]
+# bit 19-16: MPPSel20	0, GPIO[20]
+# bit 23-20: MPPSel21	0, GPIO[21]
+# bit 27-24: MPPSel22	0, GPIO[22]
+# bit 31-28: MPPSel23	0, GPIO[23]
+
+DATA 0xFFD100E0 0x1B1B1B1B	# IO Configuration 0 Register
+DATA 0xFFD20134 0x66666666	# L2 RAM Timing 0 Register
+DATA 0xFFD20138 0x66666666	# L2 RAM Timing 1 Register
+
+# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched!
+# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage
+
+#Dram initalization
+DATA 0xFFD01400 0x43000400	# SDRAM Configuration Register
+# bit13-0:  0x400 (DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x39543000	# DDR Controller Control Low
+# bit 3-0:  0 reserved
+# bit 4:    0=addr/cmd in smame cycle
+# bit 5:    0=clk is driven during self refresh, we don't care for APX
+# bit 6:    0=use recommended falling edge of clk for addr/cmd
+# bit14:    0=input buffer always powered up
+# bit18:    1=cpu lock transaction enabled
+# bit23-20: 3=recommended value for CL=3 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 6= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31:    0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x34136552	# DDR Timing (Low) (active cycles value +1)
+# bit3-0:   TRAS lsbs
+# bit7-4:   TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20:    TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000033	#  DDR Timing (High)
+# bit6-0:   TRFC
+# bit8-7:   TR2R
+# bit10-9:  TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000000D	#  DDR Address Control
+# bit1-0:   01, Cs0width=x16
+# bit3-2:   11, Cs0size=1Gb
+# bit5-4:   00, Cs2width=nonexistent
+# bit7-6:   00, Cs1size =nonexistent
+# bit9-8:   00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16:    0,  Cs0AddrSel
+# bit17:    0,  Cs1AddrSel
+# bit18:    0,  Cs2AddrSel
+# bit19:    0,  Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
+# bit0:    0,  OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000	#  DDR Operation
+# bit3-0:   0x0, DDR cmd
+# bit31-4:  0 required
+
+DATA 0xFFD0141C 0x00000652	#  DDR Mode
+DATA 0xFFD01420 0x00000044	#  DDR Extended Mode
+# bit0:    0,  DDR DLL enabled
+# bit1:    0,  DDR drive strenght normal
+# bit2:    1,  DDR ODT control lsd disabled
+# bit5-3:  000, required
+# bit6:    1,  DDR ODT control msb, enabled
+# bit9-7:  000, required
+# bit10:   0,  differential DQS enabled
+# bit11:   0, required
+# bit12:   0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F07F	#  DDR Controller Control High
+# bit2-0:  111, required
+# bit3  :  1  , MBUS Burst Chop disabled
+# bit6-4:  111, required
+# bit7  :  0
+# bit8  :  0  , no sample stage
+# bit9  :  0  , no half clock cycle addition to dataout
+# bit10 :  0  , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 :  0  , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0    required
+DATA 0xFFD01428 0x00074510
+DATA 0xFFD0147c 0x00007451
+
+DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1	# CS[0]n Size
+# bit0:    1,  Window enabled
+# bit1:    0,  Write Protect disabled
+# bit3-2:  00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00010001	#  DDR ODT Control (Low)
+# bit3-0:  0, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:0, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
+# bit1-0:  00, ODT0 controlled by ODT Control (low) register above
+# bit3-2:  00, ODT1 controlled by register
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000FC11	# CPU ODT Control
+# bit3-0:  F, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit7-4:  0, ODT0Wr, Internal ODT asserted during write to DRAM bank0
+# bit9-8:  1, ODTEn, never active
+# bit11-10:2, DQ_ODTSel. ODT select turned on, 75 ohm
+
+DATA 0xFFD01480 0x00000001	# DDR Initialization Control
+# bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/roms/u-boot/board/keymile/km_arm/kwbimage_128M16_1.cfg b/roms/u-boot/board/keymile/km_arm/kwbimage_128M16_1.cfg
new file mode 100644
index 00000000..71e3609c
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/kwbimage_128M16_1.cfg
@@ -0,0 +1,257 @@
+#
+# (C) Copyright 2010
+# Heiko Schocher, DENX Software Engineering, hs@denx.de.
+#
+# (C) Copyright 2012
+# Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
+# Stefan Bigler, Keymile AG, stefan.bigler@keymile.com
+#
+# (C) Copyright 2012
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Refer doc/README.kwbimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+DATA 0xFFD10000 0x01112222	# MPP Control 0 Register
+# bit 3-0:   2, MPPSel0  SPI_CSn  (1=NF_IO[2])
+# bit 7-4:   2, MPPSel1  SPI_SI   (1=NF_IO[3])
+# bit 12-8:  2, MPPSel2  SPI_SCK  (1=NF_IO[4])
+# bit 15-12: 2, MPPSel3  SPI_SO   (1=NF_IO[5])
+# bit 19-16: 1, MPPSel4  NF_IO[6]
+# bit 23-20: 1, MPPSel5  NF_IO[7]
+# bit 27-24: 1, MPPSel6  SYSRST_O
+# bit 31-28: 0, MPPSel7  GPO[7]
+
+DATA 0xFFD10004 0x03303300	# MPP Control 1 Register
+# bit 3-0:   0, MPPSel8	 GPIO[8]
+# bit 7-4:   0, MPPSel9  GPIO[9]
+# bit 12-8:  3, MPPSel10 UA0_TXD
+# bit 15-12: 3, MPPSel11 UA0_RXD
+# bit 19-16: 0, MPPSel12 not connected
+# bit 23-20: 3, MPPSel13 UA1_TXD
+# bit 27-24: 3, MPPSel14 UA1_RXD
+# bit 31-28: 0, MPPSel15 GPIO[15]
+
+DATA 0xFFD10008 0x00001100	# MPP Control 2 Register
+# bit 3-0:   0, MPPSel16 GPIO[16]
+# bit 7-4:   0, MPPSel17 not connected
+# bit 12-8:  1, MPPSel18 NF_IO[0]
+# bit 15-12: 1, MPPSel19 NF_IO[1]
+# bit 19-16: 0, MPPSel20 GPIO[20]
+# bit 23-20: 0, MPPSel21 GPIO[21]
+# bit 27-24: 0, MPPSel22 GPIO[22]
+# bit 31-28: 0, MPPSel23 GPIO[23]
+
+# MPP Control 3-6 Register untouched (MPP24-49)
+
+DATA 0xFFD100E0 0x1B1B1B1B	# IO Configuration 0 Register
+# bit 2-0:   3, Reserved
+# bit 5-3:   3, Reserved
+# bit 6:     0, Reserved
+# bit 7:     0, RGMII-pads voltage = 3.3V
+# bit 10-8:  3, Reserved
+# bit 13-11: 3, Reserved
+# bit 14:    0, Reserved
+# bit 15:    0, MPP RGMII-pads voltage = 3.3V
+# bit 31-16  0x1B1B, Reserved
+
+DATA 0xFFD20134 0x66666666	# L2 RAM Timing 0 Register
+# bit 0-1:   2, Tag RAM RTC RAM0
+# bit 3-2:   1, Tag RAM WTC RAM0
+# bit 7-4:   6, Reserve
+# bit 9-8:   2, Valid RAM RTC RAM
+# bit 11-10: 1, Valid RAM WTC RAM
+# bit 13-12: 2, Dirty RAM RTC RAM
+# bit 15-14: 1, Dirty RAM WTC RAM
+# bit 17-16: 2, Data RAM RTC RAM0
+# bit 19-18: 1, Data RAM WTC RAM0
+# bit 21-20: 2, Data RAM RTC RAM1
+# bit 23-22: 1, Data RAM WTC RAM1
+# bit 25-24: 2, Data RAM RTC RAM2
+# bit 27-26: 1, Data RAM WTC RAM2
+# bit 29-28: 2, Data RAM RTC RAM3
+# bit 31-30: 1, Data RAM WTC RAM4
+
+DATA 0xFFD20138 0x66666666	# L2 RAM Timing 1 Register
+# bit 15-0:  ???, Reserve
+# bit 17-16: 2, ECC RAM RTC RAM0
+# bit 19-18: 1, ECC RAM WTC RAM0
+# bit 31-20: ???,Reserve
+
+# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched!
+# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage
+
+# SDRAM initalization
+DATA 0xFFD01400 0x430004E0	# SDRAM Configuration Register
+# bit 13-0:  0x4E0, DDR2 clks refresh rate
+# bit 14:    0, reserved
+# bit 15:    0, reserved
+# bit 16:    0, CPU to Dram Write buffer policy
+# bit 17:    0, Enable Registered DIMM or Equivalent Sampling Logic
+# bit 19-18: 0, reserved
+# bit 23-20: 0, reserved
+# bit 24:    1, enable exit self refresh mode on DDR access
+# bit 25:    1, required
+# bit 29-26: 0, reserved
+# bit 31-30: 1, reserved
+
+DATA 0xFFD01404 0x36543000	# DDR Controller Control Low
+# bit 3-0:   0, reserved
+# bit 4:     0, 2T mode =addr/cmd in same cycle
+# bit 5:     0, clk is driven during self refresh, we don't care for APX
+# bit 6:     0, use recommended falling edge of clk for addr/cmd
+# bit 7-11:  0, reserved
+# bit 12-13: 1, reserved, required 1
+# bit 14:    0, input buffer always powered up
+# bit 17-15: 0, reserved
+# bit 18:    1, cpu lock transaction enabled
+# bit 19:    0, reserved
+# bit 23-20: 5, recommended value for CL=4 and STARTBURST_DEL disabled bit31=0
+# bit 27-24: 6, CL+1, STARTBURST sample stages, for freqs 200-399MHz, unbuffered DIMM
+# bit 30-28: 3, required
+# bit 31:    0,no additional STARTBURST delay
+
+DATA 0xFFD01408 0x2302444e	# DDR Timing (Low) (active cycles value +1)
+# bit 3-0:   0xE, TRAS, 15 clk (45 ns)
+# bit 7-4:   0x4, TRCD, 5 clk (15 ns)
+# bit 11-8:  0x4, TRP, 5 clk (15 ns)
+# bit 15-12: 0x4, TWR, 5 clk (15 ns)
+# bit 19-16: 0x2, TWTR, 3 clk (7.5 ns)
+# bit 20:      0, extended TRAS msb
+# bit 23-21:   0, reserved
+# bit 27-24: 0x3, TRRD, 4 clk (10 ns)
+# bit 31-28: 0x2, TRTP, 3 clk (7.5 ns)
+
+DATA 0xFFD0140C 0x0000003e	#  DDR Timing (High)
+# bit 6-0:   0x3E, TRFC, 63 clk (195 ns)
+# bit 8-7:      0, TR2R
+# bit 10-9:     0, TR2W
+# bit 12-11:    0, TW2W
+# bit 31-13:    0, reserved
+
+DATA 0xFFD01410 0x00000001	#  DDR Address Control
+# bit 1-0:    1, Cs0width=x16
+# bit 3-2:    0, Cs0size=2Gb
+# bit 5-4:    0, Cs1width=nonexistent
+# bit 7-6:    0, Cs1size =nonexistent
+# bit 9-8:    0, Cs2width=nonexistent
+# bit 11-10:  0, Cs2size =nonexistent
+# bit 13-12:  0, Cs3width=nonexistent
+# bit 15-14:  0, Cs3size =nonexistent
+# bit 16:     0, Cs0AddrSel
+# bit 17:     0, Cs1AddrSel
+# bit 18:     0, Cs2AddrSel
+# bit 19:     0, Cs3AddrSel
+# bit 31-20:  0, required
+
+DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
+# bit 0:      0,  OpenPage enabled
+# bit 31-1:   0, required
+
+DATA 0xFFD01418 0x00000000	#  DDR Operation
+# bit 3-0:    0, DDR cmd
+# bit 31-4:   0, required
+
+DATA 0xFFD0141C 0x00000652	#  DDR Mode
+# bit 2-0:    2, Burst Length = 4
+# bit 3:      0, Burst Type
+# bit 6-4:    5, CAS Latency = 5
+# bit 7:      0, Test mode
+# bit 8:      0, DLL Reset
+# bit 11-9:   3, Write recovery for auto-precharge must be 3
+# bit 12:     0, Active power down exit time, fast exit
+# bit 14-13:  0, reserved
+# bit 31-15:  0, reserved
+
+DATA 0xFFD01420 0x00000006	#  DDR Extended Mode
+# bit 0:      0, DDR DLL enabled
+# bit 1:      1,  DDR drive strength reduced
+# bit 2:      1,  DDR ODT control lsb, 75 ohm termination [RTT0]
+# bit 5-3:    0, required
+# bit 6:      0, DDR ODT control msb, 75 ohm termination [RTT1]
+# bit 9-7:    0, required
+# bit 10:     0, differential DQS enabled
+# bit 11:     0, required
+# bit 12:     0, DDR output buffer enabled
+# bit 31-13:  0 required
+
+DATA 0xFFD01424 0x0000F17F	#  DDR Controller Control High
+# bit 2-0:    7, required
+# bit 3:      1, MBUS Burst Chop disabled
+# bit 6-4:    7, required
+# bit 7:      0, reserved
+# bit 8:      1, add sample stage required for f > 266 MHz
+# bit 9:      0, no half clock cycle addition to dataout
+# bit 10:     0, 1/4 clock cycle skew enabled for addr/ctl signals
+# bit 11:     0, 1/4 clock cycle skew disabled for write mesh
+# bit 15-12:0xf, required
+# bit 31-16:  0, required
+
+DATA 0xFFD01428 0x00084520	# DDR2 SDRAM Timing Low
+# bit 3-0:    0, required
+# bit 7-4:    2, M_ODT assertion 2 cycles after read start command
+# bit 11-8:   5, M_ODT de-assertion 5 cycles after read start command
+#                (ODT turn off delay 2,5 clk cycles)
+# bit 15-12:  4, internal ODT time based on bit 7-4
+#                with the considered SDRAM internal delay
+# bit 19-16:  8, internal ODT de-assertion based on bit 11-8
+#                with the considered SDRAM internal delay
+# bit 31-20:  0, required
+
+DATA 0xFFD0147c 0x00008452	# DDR2 SDRAM Timing High
+# bit 3-0:    2, M_ODT assertion same as bit 11-8
+# bit 7-4:    5, M_ODT de-assertion same as bit 15-12
+# bit 11-8:   4, internal ODT assertion 2 cycles after write start command
+#                with the considered SDRAM internal delay
+# bit 15-12:  8, internal ODT de-assertion 5 cycles after write start command
+#                with the considered SDRAM internal delay
+
+DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
+# bit 23-0:   0, reserved
+# bit 31-24:  0, CPU CS Window0 Base Address, addr bits [31:24]
+
+DATA 0xFFD01504 0x0FFFFFF1	# CS[0]n Size
+# bit 0:      1, Window enabled
+# bit 1:      0, Write Protect disabled
+# bit 3-2:    0, CS0 hit selected
+# bit 23-4:ones, required
+# bit 31-24: 0x0F, Size (i.e. 256MB)
+
+DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00010000	#  DDR ODT Control (Low)
+# bit 3-0:     0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0
+# bit 7-4:     0, ODT0Rd, MODT[1] not asserted
+# bit 11-8:    0, required
+# big 15-11:   0, required
+# bit 19-16:   1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+# bit 23-20:   0, ODT0Wr, MODT[1] not asserted
+# bit 27-24:   0, required
+# bit 31-28:   0, required
+
+DATA 0xFFD01498 0x00000000	#  DDR ODT Control (High)
+# bit 1-0:     0, ODT0 controlled by ODT Control (low) register above
+# bit 3-2:     0, ODT1 controlled by register
+# bit 31-4:    0, required
+
+DATA 0xFFD0149C 0x0000E801	# CPU ODT Control
+# bit 3-0:     1, ODTRd, Internal ODT asserted during read from DRAM bank0
+# bit 7-4:     0, ODTWr, Internal ODT not asserted during write to DRAM
+# bit 9-8:     0, ODTEn, controlled by ODTRd and ODTWr
+# bit 11-10:   2, DQ_ODTSel. ODT select turned on, 75 ohm
+# bit 13-12:   2, STARTBURST ODT buffer selected, 75 ohm
+# bit 14:      1, STARTBURST ODT enabled
+# bit 15:      1, Use ODT Block
+
+DATA 0xFFD01480 0x00000001	# DDR Initialization Control
+# bit 0:       1, enable DDR init upon this register write
+# bit 31-1:    0, reserved
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/roms/u-boot/board/keymile/km_arm/kwbimage_256M8_1.cfg b/roms/u-boot/board/keymile/km_arm/kwbimage_256M8_1.cfg
new file mode 100644
index 00000000..39341381
--- /dev/null
+++ b/roms/u-boot/board/keymile/km_arm/kwbimage_256M8_1.cfg
@@ -0,0 +1,259 @@
+#
+# (C) Copyright 2012
+# Stefan Bigler, Keymile AG, stefan.bigler@keymile.com
+# Norbert Mayer, Keymile AG, norbert.mayer@keymile.com
+# Deepak Patel, XENTECH Limited, deepak.patel@xentech.co.uk
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Refer doc/README.kwbimage for more details about how-to configure
+# and create kirkwood boot image
+#
+# This configuration applies to COGE5 design (ARM-part)
+# Two 8-Bit devices are connected on the 16-Bit bus on the same
+# chip-select. The supported devices are
+#   MT47H256M8EB-3IT:C
+#   MT47H256M8EB-25EIT:C
+
+# Boot Media configurations
+BOOT_FROM	spi	# Boot from SPI flash
+
+DATA 0xFFD10000 0x01112222	# MPP Control 0 Register
+# bit 3-0:   2, MPPSel0  SPI_CSn  (1=NF_IO[2])
+# bit 7-4:   2, MPPSel1  SPI_MOSI (1=NF_IO[3])
+# bit 12-8:  2, MPPSel2  SPI_SCK  (1=NF_IO[4])
+# bit 15-12: 2, MPPSel3  SPI_MISO (1=NF_IO[5])
+# bit 19-16: 1, MPPSel4  NF_IO[6]
+# bit 23-20: 1, MPPSel5  NF_IO[7]
+# bit 27-24: 1, MPPSel6  SYSRST_O
+# bit 31-28: 0, MPPSel7  GPO[7]
+
+DATA 0xFFD10004 0x03303300	# MPP Control 1 Register
+# bit 3-0:   0, MPPSel8	 GPIO[8] CPU_SDA bitbanged
+# bit 7-4:   0, MPPSel9  GPIO[9] CPU_SCL bitbanged
+# bit 12-8:  3, MPPSel10 UA0_TXD
+# bit 15-12: 3, MPPSel11 UA0_RXD
+# bit 19-16: 0, MPPSel12 not connected
+# bit 23-20: 3, MPPSel13 GPIO[14]
+# bit 27-24: 3, MPPSel14 GPIO[15]
+# bit 31-28: 0, MPPSel15 GPIO[16] BOOT_FL_SEL (SPI-MUX Signal)
+
+DATA 0xFFD10008 0x00001100	# MPP Control 2 Register
+# bit 3-0:   0, MPPSel16 GPIO[16]
+# bit 7-4:   0, MPPSel17 not connected
+# bit 11-8:  1, MPPSel18 NF_IO[0]
+# bit 15-12: 1, MPPSel19 NF_IO[1]
+# bit 19-16: 0, MPPSel20 GPIO[20]
+# bit 23-20: 0, MPPSel21 GPIO[21]
+# bit 27-24: 0, MPPSel22 GPIO[22]
+# bit 31-28: 0, MPPSel23 GPIO[23]
+
+# MPP Control 3-6 Register untouched (MPP24-49)
+
+DATA 0xFFD100E0 0x1B1B1B1B	# IO Configuration 0 Register
+# bit 2-0:   3, Reserved
+# bit 5-3:   3, Reserved
+# bit 6:     0, Reserved
+# bit 7:     0, RGMII-pads voltage = 3.3V
+# bit 10-8:  3, Reserved
+# bit 13-11: 3, Reserved
+# bit 14:    0, Reserved
+# bit 15:    0, MPP RGMII-pads voltage = 3.3V
+# bit 31-16  0x1B1B, Reserved
+
+DATA 0xFFD20134 0x66666666	# L2 RAM Timing 0 Register
+# bit 0-1:   2, Tag RAM RTC RAM0
+# bit 3-2:   1, Tag RAM WTC RAM0
+# bit 7-4:   6, Reserved
+# bit 9-8:   2, Valid RAM RTC RAM
+# bit 11-10: 1, Valid RAM WTC RAM
+# bit 13-12: 2, Dirty RAM RTC RAM
+# bit 15-14: 1, Dirty RAM WTC RAM
+# bit 17-16: 2, Data RAM RTC RAM0
+# bit 19-18: 1, Data RAM WTC RAM0
+# bit 21-20: 2, Data RAM RTC RAM1
+# bit 23-22: 1, Data RAM WTC RAM1
+# bit 25-24: 2, Data RAM RTC RAM2
+# bit 27-26: 1, Data RAM WTC RAM2
+# bit 29-28: 2, Data RAM RTC RAM3
+# bit 31-30: 1, Data RAM WTC RAM4
+
+DATA 0xFFD20138 0x66666666	# L2 RAM Timing 1 Register
+# bit 15-0:  ?, Reserved
+# bit 17-16: 2, ECC RAM RTC RAM0
+# bit 19-18: 1, ECC RAM WTC RAM0
+# bit 31-20: ?,Reserved
+
+# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched!
+# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage
+
+# SDRAM initalization
+DATA 0xFFD01400 0x430004E0	# SDRAM Configuration Register
+# bit 13-0:  0x4E0, DDR2 clks refresh rate
+# bit 14:    0, reserved
+# bit 15:    0, reserved
+# bit 16:    0, CPU to Dram Write buffer policy
+# bit 17:    0, Enable Registered DIMM or Equivalent Sampling Logic
+# bit 19-18: 0, reserved
+# bit 23-20: 0, reserved
+# bit 24:    1, enable exit self refresh mode on DDR access
+# bit 25:    1, required
+# bit 29-26: 0, reserved
+# bit 31-30: 1, reserved
+
+DATA 0xFFD01404 0x36543000	# DDR Controller Control Low
+# bit 3-0:   0, reserved
+# bit 4:     0, 2T mode =addr/cmd in same cycle
+# bit 5:     0, clk is driven during self refresh, we don't care for APX
+# bit 6:     0, use recommended falling edge of clk for addr/cmd
+# bit 7-11:  0, reserved
+# bit 12-13: 1, reserved, required 1
+# bit 14:    0, input buffer always powered up
+# bit 17-15: 0, reserved
+# bit 18:    1, cpu lock transaction enabled
+# bit 19:    0, reserved
+# bit 23-20: 5, recommended value for CL=4 and STARTBURST_DEL disabled bit31=0
+# bit 27-24: 6, CL+1, STARTBURST sample stages, freq 200-399MHz, unbuffer DIMM
+# bit 30-28: 3, required
+# bit 31:    0, no additional STARTBURST delay
+
+DATA 0xFFD01408 0x2202444E	# DDR Timing (Low) (active cycles value +1)
+# bit 3-0:   0xe, TRAS = 45ns -> 15 clk cycles
+# bit 7-4:   0x4, TRCD = 15ns -> 5 clk cycles
+# bit 11-8:  0x4, TRP = 15ns -> 5 clk cycles
+# bit 15-12: 0x4, TWR = 15ns -> 5 clk cycles
+# bit 19-16: 0x2, TWTR = 7,5ns -> 3 clk cycles
+# bit 20:      0, extended TRAS msb
+# bit 23-21:   0, reserved
+# bit 27-24: 0x2, TRRD = 7,5ns -> 3 clk cycles
+# bit 31-28: 0x2, TRTP = 7,5ns -> 3 clk cycles
+
+DATA 0xFFD0140C 0x0000003E	#  DDR Timing (High)
+# bit 6-0:   0x3E, TRFC = 195ns -> 63 clk cycles
+# bit 8-7:      0, TR2R
+# bit 10-9:     0, TR2W
+# bit 12-11:    0, TW2W
+# bit 31-13:    0, reserved
+
+DATA 0xFFD01410 0x00000000	#  DDR Address Control
+# bit 1-0:    0, Cs0width=x8 (2 devices)
+# bit 3-2:    0, Cs0size=2Gb
+# bit 5-4:    0, Cs1width=nonexistent
+# bit 7-6:    0, Cs1size =nonexistent
+# bit 9-8:    0, Cs2width=nonexistent
+# bit 11-10:  0, Cs2size =nonexistent
+# bit 13-12:  0, Cs3width=nonexistent
+# bit 15-14:  0, Cs3size =nonexistent
+# bit 16:     0, Cs0AddrSel
+# bit 17:     0, Cs1AddrSel
+# bit 18:     0, Cs2AddrSel
+# bit 19:     0, Cs3AddrSel
+# bit 31-20:  0, required
+
+DATA 0xFFD01414 0x00000000	#  DDR Open Pages Control
+# bit 0:      0,  OpenPage enabled
+# bit 31-1:   0, required
+
+DATA 0xFFD01418 0x00000000	#  DDR Operation
+# bit 3-0:    0, DDR cmd
+# bit 31-4:   0, required
+
+DATA 0xFFD0141C 0x00000652	#  DDR Mode
+# bit 2-0:    2, Burst Length = 4
+# bit 3:      0, Burst Type
+# bit 6-4:    5, CAS Latency = 5
+# bit 7:      0, Test mode
+# bit 8:      0, DLL Reset
+# bit 11-9:   3, Write recovery for auto-precharge must be 3
+# bit 12:     0, Active power down exit time, fast exit
+# bit 14-13:  0, reserved
+# bit 31-15:  0, reserved
+
+DATA 0xFFD01420 0x00000006	#  DDR Extended Mode
+# bit 0:      0, DDR DLL enabled
+# bit 1:      1, DDR drive strenght reduced
+# bit 2:      1, DDR ODT control lsb, 75ohm termination [RTT0]
+# bit 5-3:    0, required
+# bit 6:      0, DDR ODT control msb, 75ohm termination [RTT1]
+# bit 9-7:    0, required
+# bit 10:     0, differential DQS enabled
+# bit 11:     0, required
+# bit 12:     0, DDR output buffer enabled
+# bit 31-13:  0 required
+
+DATA 0xFFD01424 0x0000F17F	#  DDR Controller Control High
+# bit 2-0:    7, required
+# bit 3:      1, MBUS Burst Chop disabled
+# bit 6-4:    7, required
+# bit 7:      0, reserved
+# bit 8:      1, add sample stage required for > 266Mhz
+# bit 9:      0, no half clock cycle addition to dataout
+# bit 10:     0, 1/4 clock cycle skew enabled for addr/ctl signals
+# bit 11:     0, 1/4 clock cycle skew disabled for write mesh
+# bit 15-12:0xf, required
+# bit 31-16:  0, required
+
+DATA 0xFFD01428 0x00084520	# DDR2 SDRAM Timing Low
+# bit 3-0:    0, required
+# bit 7-4:    2, M_ODT assertion 2 cycles after read start command
+# bit 11-8:   5, M_ODT de-assertion 5 cycles after read start command
+#                (ODT turn off delay 2,5 clk cycles)
+# bit 15-12:  4, internal ODT time based on bit 7-4
+#                with the considered SDRAM internal delay
+# bit 19-16:  8, internal ODT de-assertion based on bit 11-8
+#                with the considered SDRAM internal delay
+# bit 31-20:  0, required
+
+DATA 0xFFD0147c 0x00008452	# DDR2 SDRAM Timing High
+# bit 3-0:    2, M_ODT assertion same as bit 11-8
+# bit 7-4:    5, M_ODT de-assertion same as bit 15-12
+# bit 11-8:   4, internal ODT assertion 2 cycles after write start command
+#                with the considered SDRAM internal delay
+# bit 15-12:  8, internal ODT de-assertion 5 cycles after write start command
+#                with the considered SDRAM internal delay
+
+DATA 0xFFD01500 0x00000000	# CS[0]n Base address to 0x0
+# bit 23-0:   0, reserved
+# bit 31-24:  0, CPU CS Window0 Base Address, addr bits [31:24]
+
+DATA 0xFFD01504 0x1FFFFFF1	# CS[0]n Size
+# bit 0:      1, Window enabled
+# bit 1:      0, Write Protect disabled
+# bit 3-2:    0, CS0 hit selected
+# bit 23-4:ones, required
+# bit 31-24:0x1F, Size (i.e. 512MB)
+
+DATA 0xFFD0150C 0x00000000	# CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000	# CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000	# CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00010000	#  DDR ODT Control (Low)
+# bit 3-0:     0, ODT0Rd, MODT[0] not asserted during read from DRAM CS0
+# bit 7-4:     0, ODT0Rd, MODT[1] not asserted
+# bit 11-8:    0, required
+# big 15-11:   0, required
+# bit 19-16:   1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+# bit 23-20:   0, ODT0Wr, MODT[1] not asserted
+# bit 27-24:   0, required
+# bit 31-28:   0, required
+
+DATA 0xFFD01498 0x00000004	#  DDR ODT Control (High)
+# bit 1-0:     0, ODT0 controlled by ODT Control (low) register above
+# bit 3-2:     1, ODT1 never active
+# bit 31-4:    0, required
+
+DATA 0xFFD0149C 0x0000E801	# CPU ODT Control
+# bit 3-0:     1, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit 7-4:     0, ODT0Wr, Internal ODT not asserted during write to DRAM bank0
+# bit 9-8:     0, ODTEn, controlled by ODT0Rd and ODT0Wr
+# bit 11-10:   2, DQ_ODTSel. ODT select turned on, 75 ohm
+# bit 13-12:   2, STARTBURST ODT buffer selected, 75 ohm
+# bit 14:      1, STARTBURST ODT enabled
+# bit 15:      1, Use ODT Block
+
+DATA 0xFFD01480 0x00000001	# DDR Initialization Control
+# bit 0:       1, enable DDR init upon this register write
+# bit 31-1:    0, reserved
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/roms/u-boot/board/keymile/kmp204x/Makefile b/roms/u-boot/board/keymile/kmp204x/Makefile
new file mode 100644
index 00000000..c57ca08e
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/Makefile
@@ -0,0 +1,12 @@
+#
+# (C) Copyright 2001-2007
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	:= kmp204x.o ddr.o eth.o tlb.o pci.o law.o qrio.o \
+	../common/common.o ../common/ivm.o
diff --git a/roms/u-boot/board/keymile/kmp204x/ddr.c b/roms/u-boot/board/keymile/kmp204x/ddr.c
new file mode 100644
index 00000000..34ac6979
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/ddr.c
@@ -0,0 +1,64 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+  */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <fsl_ddr_sdram.h>
+#include <fsl_ddr_dimm_params.h>
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	if (ctrl_num) {
+		printf("Wrong parameter for controller number %d", ctrl_num);
+		return;
+	}
+
+	/* automatic calibration for nb of cycles between read and DQS pre */
+	popts->cpo_override = 0xFF;
+
+	/* 1/2 clk delay between wr command and data strobe */
+	popts->write_data_delay = 4;
+	/* clk lauched 1/2 applied cylcle after address command */
+	popts->clk_adjust = 4;
+	/* 1T timing: command/address held for only 1 cycle */
+	popts->twot_en = 0;
+
+	/* we have only one module, half str should be OK */
+	popts->half_strength_driver_enable = 1;
+
+	/* wrlvl values overriden as recommended by ddr init func */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+	popts->wrlvl_start = 0x6;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR_ODT_75ohm;
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size = 0;
+
+	puts("Initializing with SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	debug("    DDR: ");
+	return dram_size;
+}
diff --git a/roms/u-boot/board/keymile/kmp204x/eth.c b/roms/u-boot/board/keymile/kmp204x/eth.c
new file mode 100644
index 00000000..a0731055
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/eth.c
@@ -0,0 +1,71 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <phy.h>
+
+int board_eth_init(bd_t *bis)
+{
+	int ret = 0;
+#ifdef CONFIG_FMAN_ENET
+	struct fsl_pq_mdio_info dtsec_mdio_info;
+
+	printf("Initializing Fman\n");
+
+	dtsec_mdio_info.regs =
+		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the real 1G MDIO bus */
+	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+	/* DTESC1/2 don't have a PHY, they are temporarily disabled
+	 * so that u-boot doesn't try to unsuccessfuly enable them */
+	fm_disable_port(FM1_DTSEC1);
+	fm_disable_port(FM1_DTSEC2);
+
+	/*
+	 * Program RGMII DTSEC5 (FM1 MAC5) on the EC2 physical itf
+	 * This is the debug interface, the only one used in u-boot
+	 */
+	fm_info_set_phy_address(FM1_DTSEC5, CONFIG_SYS_FM1_DTSEC5_PHY_ADDR);
+	fm_info_set_mdio(FM1_DTSEC5,
+			 miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
+
+	ret = cpu_eth_init(bis);
+
+	/* reenable DTSEC1/2 for later (kernel) */
+	fm_enable_port(FM1_DTSEC1);
+	fm_enable_port(FM1_DTSEC2);
+#endif
+
+	return ret;
+}
+
+#if defined(CONFIG_PHYLIB) && defined(CONFIG_PHY_MARVELL)
+
+#define mv88E1118_PAGE_REG	22
+
+int board_phy_config(struct phy_device *phydev)
+{
+	if (phydev->addr == CONFIG_SYS_FM1_DTSEC5_PHY_ADDR) {
+		/* driver config is good */
+		if (phydev->drv->config)
+			phydev->drv->config(phydev);
+
+		/* but we still need to fix the LEDs */
+		phy_write(phydev, MDIO_DEVAD_NONE, mv88E1118_PAGE_REG, 0x0003);
+		phy_write(phydev, MDIO_DEVAD_NONE, 0x10, 0x0840);
+		phy_write(phydev, MDIO_DEVAD_NONE, mv88E1118_PAGE_REG, 0x0000);
+	}
+
+	return 0;
+}
+#endif
diff --git a/roms/u-boot/board/keymile/kmp204x/kmp204x.c b/roms/u-boot/board/keymile/kmp204x/kmp204x.c
new file mode 100644
index 00000000..6bc8eb85
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/kmp204x.c
@@ -0,0 +1,287 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2011,2012 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/common.h"
+#include "kmp204x.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	printf("Board: Keymile %s\n", CONFIG_KM_BOARD_NAME);
+
+	return 0;
+}
+
+/* I2C deblocking uses the algorithm defined in board/keymile/common/common.c
+ * 2 dedicated QRIO GPIOs externally pull the SCL and SDA lines
+ * For I2C only the low state is activly driven and high state is pulled-up
+ * by a resistor. Therefore the deblock GPIOs are used
+ *  -> as an active output to drive a low state
+ *  -> as an open-drain input to have a pulled-up high state
+ */
+
+/* QRIO GPIOs used for deblocking */
+#define DEBLOCK_PORT1	GPIO_A
+#define DEBLOCK_SCL1	20
+#define DEBLOCK_SDA1	21
+
+/* By default deblock GPIOs are floating */
+static void i2c_deblock_gpio_cfg(void)
+{
+	/* set I2C bus 1 deblocking GPIOs input, but 0 value for open drain */
+	qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SCL1);
+	qrio_gpio_direction_input(DEBLOCK_PORT1, DEBLOCK_SDA1);
+
+	qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, 0);
+	qrio_set_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, 0);
+}
+
+void set_sda(int state)
+{
+	qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1, state);
+}
+
+void set_scl(int state)
+{
+	qrio_set_opendrain_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1, state);
+}
+
+int get_sda(void)
+{
+	return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SDA1);
+}
+
+int get_scl(void)
+{
+	return qrio_get_gpio(DEBLOCK_PORT1, DEBLOCK_SCL1);
+}
+
+
+#define ZL30158_RST	8
+#define BFTIC4_RST	0
+
+int board_early_init_f(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	/* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */
+	setbits_be32(&gur->ddrclkdr, 0x001f000f);
+
+	/* set the BFTIC's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable WD on it */
+	qrio_wdmask(BFTIC4_RST, true);
+
+	/* set the ZL30138's prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and take it out of reset as soon as possible (needed for Hooper) */
+	qrio_prst(ZL30158_RST, false, false);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	int ret = 0;
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	set_liodns();
+	setup_portals();
+
+	ret = trigger_fpga_config();
+	if (ret)
+		printf("error triggering PCIe FPGA config\n");
+
+	/* enable the Unit LED (red) & Boot LED (on) */
+	qrio_set_leds();
+
+	/* enable Application Buffer */
+	qrio_enable_app_buffer();
+
+	return ret;
+}
+
+unsigned long get_board_sys_clk(unsigned long dummy)
+{
+	return 66666666;
+}
+
+#define ETH_FRONT_PHY_RST	15
+#define QSFP2_RST		11
+#define QSFP1_RST		10
+#define ZL30343_RST		9
+
+int misc_init_f(void)
+{
+	/* configure QRIO pis for i2c deblocking */
+	i2c_deblock_gpio_cfg();
+
+	/* configure the front phy's prstcfg and take it out of reset */
+	qrio_prstcfg(ETH_FRONT_PHY_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prst(ETH_FRONT_PHY_RST, false, false);
+
+	/* set the ZL30343 prstcfg to reset at power-up and unit reset only */
+	qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_UNIT_RST);
+	/* and enable the WD on it */
+	qrio_wdmask(ZL30343_RST, true);
+
+	/* set the QSFPs' prstcfg to reset at power-up and unit rst only */
+	qrio_prstcfg(QSFP1_RST, PRSTCFG_POWUP_UNIT_RST);
+	qrio_prstcfg(QSFP2_RST, PRSTCFG_POWUP_UNIT_RST);
+
+	/* and enable the WD on them */
+	qrio_wdmask(QSFP1_RST, true);
+	qrio_wdmask(QSFP2_RST, true);
+
+	return 0;
+}
+
+#define NUM_SRDS_BANKS	2
+
+int misc_init_r(void)
+{
+	serdes_corenet_t *regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 expected[NUM_SRDS_BANKS] = {SRDS_PLLCR0_RFCK_SEL_100,
+		SRDS_PLLCR0_RFCK_SEL_125};
+	unsigned int i;
+
+	/* check SERDES reference clocks */
+	for (i = 0; i < NUM_SRDS_BANKS; i++) {
+		u32 actual = in_be32(&regs->bank[i].pllcr0);
+		actual &= SRDS_PLLCR0_RFCK_SEL_MASK;
+		if (actual != expected[i]) {
+			printf("Warning: SERDES bank %u expects reference \
+			       clock %sMHz, but actual is %sMHz\n", i + 1,
+			       serdes_clock_to_string(expected[i]),
+			       serdes_clock_to_string(actual));
+		}
+	}
+
+	return 0;
+}
+
+#if defined(CONFIG_HUSH_INIT_VAR)
+int hush_init_var(void)
+{
+	ivm_read_eeprom();
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_LAST_STAGE_INIT)
+
+int last_stage_init(void)
+{
+#if defined(CONFIG_KMCOGE4)
+	/* on KMCOGE4, the BFTIC4 is on the LBAPP2 */
+	struct bfticu_iomap *bftic4 =
+		(struct bfticu_iomap *)CONFIG_SYS_LBAPP2_BASE;
+	u8 dip_switch = in_8((u8 *)&(bftic4->mswitch)) & BFTICU_DIPSWITCH_MASK;
+
+	if (dip_switch != 0) {
+		/* start bootloader */
+		puts("DIP:   Enabled\n");
+		setenv("actual_bank", "0");
+	}
+#endif
+	set_km_env();
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+void fdt_fixup_fman_mac_addresses(void *blob)
+{
+	int node, i, ret;
+	char *tmp, *end;
+	unsigned char mac_addr[6];
+
+	/* get the mac addr from env */
+	tmp = getenv("ethaddr");
+	if (!tmp) {
+		printf("ethaddr env variable not defined\n");
+		return;
+	}
+	for (i = 0; i < 6; i++) {
+		mac_addr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
+		if (tmp)
+			tmp = (*end) ? end+1 : end;
+	}
+
+	/* find the correct fdt ethernet path and correct it */
+	node = fdt_path_offset(blob, "/soc/fman/ethernet@e8000");
+	if (node < 0) {
+		printf("no /soc/fman/ethernet path offset\n");
+		return;
+	}
+	ret = fdt_setprop(blob, node, "local-mac-address", &mac_addr, 6);
+	if (ret) {
+		printf("error setting local-mac-address property\n");
+		return;
+	}
+}
+#endif
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_fman_mac_addresses(blob);
+#endif
+}
+
+#if defined(CONFIG_POST)
+
+/* DIC26_SELFTEST GPIO used to start factory test sw */
+#define SELFTEST_PORT	GPIO_A
+#define SELFTEST_PIN	31
+
+int post_hotkeys_pressed(void)
+{
+	qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN);
+	return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN);
+}
+#endif
diff --git a/roms/u-boot/board/keymile/kmp204x/kmp204x.h b/roms/u-boot/board/keymile/kmp204x/kmp204x.h
new file mode 100644
index 00000000..afede994
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/kmp204x.h
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/* QRIO GPIO ports */
+#define GPIO_A			0x40
+#define GPIO_B			0x60
+
+int qrio_get_gpio(u8 port_off, u8 gpio_nr);
+void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val);
+void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value);
+void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value);
+void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr);
+
+#define PRSTCFG_POWUP_UNIT_CORE_RST	0x0
+#define PRSTCFG_POWUP_UNIT_RST		0x1
+#define PRSTCFG_POWUP_RST		0x3
+
+void qrio_prst(u8 bit, bool en, bool wden);
+void qrio_wdmask(u8 bit, bool wden);
+void qrio_prstcfg(u8 bit, u8 mode);
+void qrio_set_leds(void);
+void qrio_enable_app_buffer(void);
+
+void pci_of_setup(void *blob, bd_t *bd);
diff --git a/roms/u-boot/board/keymile/kmp204x/law.c b/roms/u-boot/board/keymile/kmp204x/law.c
new file mode 100644
index 00000000..75d69e8b
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/law.c
@@ -0,0 +1,40 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_2M, LAW_TRGT_IF_QMAN),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	/* Limit DCSR to 32M to access NPC Trace Buffer */
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
+#endif
+	SET_LAW(CONFIG_SYS_QRIO_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC),
+#ifdef CONFIG_SYS_LBAPP1_BASE_PHYS
+	SET_LAW(CONFIG_SYS_LBAPP1_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#endif
+#ifdef CONFIG_SYS_LBAPP2_BASE_PHYS
+	SET_LAW(CONFIG_SYS_LBAPP2_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/roms/u-boot/board/keymile/kmp204x/pbi.cfg b/roms/u-boot/board/keymile/kmp204x/pbi.cfg
new file mode 100644
index 00000000..1e0a171d
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/pbi.cfg
@@ -0,0 +1,76 @@
+#
+# Copyright 2012 Freescale Semiconductor, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# Refer docs/README.pblimage for more details about how-to configure
+# and create PBL boot image
+#
+
+#PBI commands
+#Configure ALTCBAR for DCSR -> DCSR@89000000
+091380c0 000009C4
+09000010 00000000
+091380c0 000009C4
+09000014 00000000
+091380c0 000009C4
+09000018 81d00000
+#Workaround for A-004849
+091380c0 000009C4
+890B0050 00000002
+091380c0 000009C4
+890B0054 00000002
+091380c0 000009C4
+890B0058 00000002
+091380c0 000009C4
+890B005C 00000002
+091380c0 000009C4
+890B0090 00000002
+091380c0 000009C4
+890B0094 00000002
+091380c0 000009C4
+890B0098 00000002
+091380c0 000009C4
+890B009C 00000002
+091380c0 000009C4
+890B0108 00000012
+091380c0 000009C4
+#Workaround for A-006559 needed for rev 2.0 of P2041 silicon
+89021008 0000f000
+091380c0 000009C4
+89021028 0000f000
+091380c0 000009C4
+89021048 0000f000
+091380c0 000009C4
+89021068 0000f000
+091380c0 000009C4
+#Flush PBL data
+09138000 00000000
+#Disable ALTCBAR
+09000018 00000000
+091380c0 000009C4
+#Initialize CPC1 as 1MB SRAM
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+09010100 00000000
+09010104 fff0000b
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff00000
+09000d08 81000013
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Initialize eSPI controller, default configuration is slow for eSPI to
+#load data, this configuration comes from u-boot eSPI driver.
+09110000 80000403
+09110020 27170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/roms/u-boot/board/keymile/kmp204x/pci.c b/roms/u-boot/board/keymile/kmp204x/pci.c
new file mode 100644
index 00000000..2b0b054a
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/pci.c
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
+#include <asm/errno.h>
+
+#include "kmp204x.h"
+
+#define PROM_SEL_L	11
+/* control the PROM_SEL_L signal*/
+static void toggle_fpga_eeprom_bus(bool cpu_own)
+{
+	qrio_gpio_direction_output(GPIO_A, PROM_SEL_L, !cpu_own);
+}
+
+#define CONF_SEL_L	10
+#define FPGA_PROG_L	19
+#define FPGA_DONE	18
+#define FPGA_INIT_L	17
+
+int trigger_fpga_config(void)
+{
+	int ret = 0, init_l;
+	/* approx 10ms */
+	u32 timeout = 10000;
+
+	/* make sure the FPGA_can access the EEPROM */
+	toggle_fpga_eeprom_bus(false);
+
+	/* assert CONF_SEL_L to be able to drive FPGA_PROG_L */
+	qrio_gpio_direction_output(GPIO_A, CONF_SEL_L, 0);
+
+	/* trigger the config start */
+	qrio_gpio_direction_output(GPIO_A, FPGA_PROG_L, 0);
+
+	/* small delay for INIT_L line */
+	udelay(10);
+
+	/* wait for FPGA_INIT to be asserted */
+	do {
+		init_l = qrio_get_gpio(GPIO_A, FPGA_INIT_L);
+		if (timeout-- == 0) {
+			printf("FPGA_INIT timeout\n");
+			ret = -EFAULT;
+			break;
+		}
+		udelay(10);
+	} while (init_l);
+
+	/* deassert FPGA_PROG, config should start */
+	qrio_set_gpio(GPIO_A, FPGA_PROG_L, 1);
+
+	return ret;
+}
+
+/* poll the FPGA_DONE signal and give the EEPROM back to the QorIQ */
+static int wait_for_fpga_config(void)
+{
+	int ret = 0, done;
+	/* approx 5 s */
+	u32 timeout = 500000;
+
+	printf("PCIe FPGA config:");
+	do {
+		done = qrio_get_gpio(GPIO_A, FPGA_DONE);
+		if (timeout-- == 0) {
+			printf(" FPGA_DONE timeout\n");
+			ret = -EFAULT;
+			goto err_out;
+		}
+		udelay(10);
+	} while (!done);
+
+	printf(" done\n");
+
+err_out:
+	/* deactive CONF_SEL and give the CPU conf EEPROM access */
+	qrio_set_gpio(GPIO_A, CONF_SEL_L, 1);
+	toggle_fpga_eeprom_bus(true);
+
+	return ret;
+}
+
+#define PCIE_SW_RST	14
+#define PEXHC_RST	13
+#define HOOPER_RST	12
+
+void pci_init_board(void)
+{
+	qrio_prstcfg(PCIE_SW_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(PEXHC_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+	qrio_prstcfg(HOOPER_RST, PRSTCFG_POWUP_UNIT_CORE_RST);
+
+	/* wait for the PCIe FPGA to be configured
+	 * it has been triggered earlier in board_early_init_r */
+	if (wait_for_fpga_config())
+		printf("error finishing PCIe FPGA config\n");
+
+	qrio_prst(PCIE_SW_RST, false, false);
+	qrio_prst(PEXHC_RST, false, false);
+	qrio_prst(HOOPER_RST, false, false);
+	/* Hooper is not direcly PCIe capable */
+	mdelay(50);
+
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/roms/u-boot/board/keymile/kmp204x/qrio.c b/roms/u-boot/board/keymile/kmp204x/qrio.c
new file mode 100644
index 00000000..b6ba93ad
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/qrio.c
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+
+#include "../common/common.h"
+#include "kmp204x.h"
+
+/* QRIO GPIO register offsets */
+#define DIRECT_OFF		0x18
+#define GPRT_OFF		0x1c
+
+int qrio_get_gpio(u8 port_off, u8 gpio_nr)
+{
+	u32 gprt;
+
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	gprt = in_be32(qrio_base + port_off + GPRT_OFF);
+
+	return (gprt >> gpio_nr) & 1U;
+}
+
+void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value)
+{
+	u32 gprt, mask;
+
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	mask = 1U << gpio_nr;
+
+	gprt = in_be32(qrio_base + port_off + GPRT_OFF);
+	if (value)
+		gprt |= mask;
+	else
+		gprt &= ~mask;
+
+	out_be32(qrio_base + port_off + GPRT_OFF, gprt);
+}
+
+void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value)
+{
+	u32 direct, mask;
+
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	mask = 1U << gpio_nr;
+
+	direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+	direct |= mask;
+	out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+
+	qrio_set_gpio(port_off, gpio_nr, value);
+}
+
+void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr)
+{
+	u32 direct, mask;
+
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	mask = 1U << gpio_nr;
+
+	direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+	direct &= ~mask;
+	out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+}
+
+void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val)
+{
+	u32 direct, mask;
+
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	mask = 1U << gpio_nr;
+
+	direct = in_be32(qrio_base + port_off + DIRECT_OFF);
+	if (val == 0)
+		/* set to output -> GPIO drives low */
+		direct |= mask;
+	else
+		/* set to input -> GPIO floating */
+		direct &= ~mask;
+
+	out_be32(qrio_base + port_off + DIRECT_OFF, direct);
+}
+
+#define WDMASK_OFF	0x16
+
+void qrio_wdmask(u8 bit, bool wden)
+{
+	u16 wdmask;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	wdmask = in_be16(qrio_base + WDMASK_OFF);
+
+	if (wden)
+		wdmask |= (1 << bit);
+	else
+		wdmask &= ~(1 << bit);
+
+	out_be16(qrio_base + WDMASK_OFF, wdmask);
+}
+
+#define PRST_OFF	0x1a
+
+void qrio_prst(u8 bit, bool en, bool wden)
+{
+	u16 prst;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	qrio_wdmask(bit, wden);
+
+	prst = in_be16(qrio_base + PRST_OFF);
+
+	if (en)
+		prst &= ~(1 << bit);
+	else
+		prst |= (1 << bit);
+
+	out_be16(qrio_base + PRST_OFF, prst);
+}
+
+#define PRSTCFG_OFF	0x1c
+
+void qrio_prstcfg(u8 bit, u8 mode)
+{
+	u32 prstcfg;
+	u8 i;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
+
+	for (i = 0; i < 2; i++) {
+		if (mode & (1<<i))
+			set_bit(2*bit+i, &prstcfg);
+		else
+			clear_bit(2*bit+i, &prstcfg);
+	}
+
+	out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
+}
+
+#define CTRLH_OFF		0x02
+#define CTRLH_WRL_BOOT		0x01
+#define CTRLH_WRL_UNITRUN	0x02
+
+void qrio_set_leds(void)
+{
+	u8 ctrlh;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	/* set UNIT LED to RED and BOOT LED to ON */
+	ctrlh = in_8(qrio_base + CTRLH_OFF);
+	ctrlh |= (CTRLH_WRL_BOOT | CTRLH_WRL_UNITRUN);
+	out_8(qrio_base + CTRLH_OFF, ctrlh);
+}
+
+#define CTRLL_OFF		0x03
+#define CTRLL_WRB_BUFENA	0x20
+
+void qrio_enable_app_buffer(void)
+{
+	u8 ctrll;
+	void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
+
+	/* enable application buffer */
+	ctrll = in_8(qrio_base + CTRLL_OFF);
+	ctrll |= (CTRLL_WRB_BUFENA);
+	out_8(qrio_base + CTRLL_OFF, ctrll);
+}
diff --git a/roms/u-boot/board/keymile/kmp204x/rcw_kmp204x.cfg b/roms/u-boot/board/keymile/kmp204x/rcw_kmp204x.cfg
new file mode 100644
index 00000000..236d5138
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/rcw_kmp204x.cfg
@@ -0,0 +1,11 @@
+#
+# Default RCW for kmp204x boards
+#
+
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#64 bytes RCW data
+14600000 00000000 28200000 00000000
+148E70CF CFC02000 58000000 41000000
+00000000 00000000 00000000 F0428816
+00000000 00000000 00000000 00000000
diff --git a/roms/u-boot/board/keymile/kmp204x/tlb.c b/roms/u-boot/board/keymile/kmp204x/tlb.c
new file mode 100644
index 00000000..d03ca802
--- /dev/null
+++ b/roms/u-boot/board/keymile/kmp204x/tlb.c
@@ -0,0 +1,110 @@
+/*
+ * (C) Copyright 2013 Keymile AG
+ * Valentin Longchamp <valentin.longchamp@keymile.com>
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	/* TLB 1 */
+	/* *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_1M, 1),
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+	/* QRIO */
+	SET_TLB_ENTRY(1, CONFIG_SYS_QRIO_BASE, CONFIG_SYS_QRIO_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_64K, 1),
+	/* *I*G* - PCI1 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_512M, 1),
+	/* *I*G* - PCI3 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_512M, 1),
+	/* *I*G* - PCI1&3 I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_128K, 1),
+#ifdef CONFIG_SYS_LBAPP1_BASE_PHYS
+	/* LBAPP1 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBAPP1_BASE, CONFIG_SYS_LBAPP1_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_256M, 1),
+#endif
+#ifdef CONFIG_SYS_LBAPP2_BASE_PHYS
+	/* LBAPP2 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBAPP2_BASE, CONFIG_SYS_LBAPP2_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 8, BOOKE_PAGESZ_256M, 1),
+#endif
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_1M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x00100000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x00100000,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_1M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SW|MAS3_SR, 0,
+		      0, 11, BOOKE_PAGESZ_1M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x00100000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x00100000,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_1M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+		      MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 16, BOOKE_PAGESZ_32K, 1),
+#endif
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/roms/u-boot/board/keymile/scripts/README b/roms/u-boot/board/keymile/scripts/README
new file mode 100644
index 00000000..dd935b2c
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/README
@@ -0,0 +1,31 @@
+These scripts are needed for our development usecases. Copy this directory
+into your tftp root directory to be able to use this scripts.
+cp -r <u-boot-repo>/board/keymile/scripts <your_tftp_root>/
+
+To load and configure these usecase, two environment variables in the u-boot
+default environment must be parsed:
+run develop : setup environment to configure for rootfs via nfs
+run ramfs   : setup environment to configure for rootfs in ram
+
+Last change: 24.11.2011
+
+develop-common.txt
+============================
+This file defines variables for working with rootfs via nfs for powerpc and
+arm.
+
+develop-<arch>.txt
+============================
+This file defines architecture specific variables for working with rootfs via
+nfs arm.
+
+
+ramfs-common.txt
+============================
+This file defines variables for working with rootfs inside the ram for powerpc
+and arm.
+
+ramfs-<arch>.txt
+============================
+This file defines architecture specific variables for working with rootfs inside
+ram.
diff --git a/roms/u-boot/board/keymile/scripts/develop-arm.txt b/roms/u-boot/board/keymile/scripts/develop-arm.txt
new file mode 100644
index 00000000..d3c974f1
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/develop-arm.txt
@@ -0,0 +1 @@
+setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
diff --git a/roms/u-boot/board/keymile/scripts/develop-common.txt b/roms/u-boot/board/keymile/scripts/develop-common.txt
new file mode 100644
index 00000000..a80812a5
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/develop-common.txt
@@ -0,0 +1,10 @@
+altbootcmd=run ${subbootcmds}
+bootcmd=run ${subbootcmds}
+configure=run set_uimage; km_setboardid && saveenv && reset
+subbootcmds=tftpfdt tftpkernel nfsargs add_default boot
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch}
+tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
+toolchain=/opt/eldk
+rootfssize=0
+set_uimage=printenv uimage || setenv uimage uImage
diff --git a/roms/u-boot/board/keymile/scripts/develop-ppc_82xx.txt b/roms/u-boot/board/keymile/scripts/develop-ppc_82xx.txt
new file mode 100644
index 00000000..d3c974f1
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/develop-ppc_82xx.txt
@@ -0,0 +1 @@
+setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
diff --git a/roms/u-boot/board/keymile/scripts/develop-ppc_8xx.txt b/roms/u-boot/board/keymile/scripts/develop-ppc_8xx.txt
new file mode 100644
index 00000000..d3c974f1
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/develop-ppc_8xx.txt
@@ -0,0 +1 @@
+setup_debug_env=tftpboot 0x200000 scripts/develop-common.txt && env import -t 0x200000 ${filesize} && run configure
diff --git a/roms/u-boot/board/keymile/scripts/ramfs-arm.txt b/roms/u-boot/board/keymile/scripts/ramfs-arm.txt
new file mode 100644
index 00000000..87e984e1
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/ramfs-arm.txt
@@ -0,0 +1 @@
+setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
diff --git a/roms/u-boot/board/keymile/scripts/ramfs-common.txt b/roms/u-boot/board/keymile/scripts/ramfs-common.txt
new file mode 100644
index 00000000..d79ad2e2
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/ramfs-common.txt
@@ -0,0 +1,13 @@
+addramfs=setenv bootargs "${bootargs} phram.phram=rootfs${boot_bank},${rootfsaddr},${rootfssize}"
+boot_bank=-1
+altbootcmd=run ${subbootcmds}
+bootcmd=run ${subbootcmds}
+subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot
+nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}
+configure=run set_uimage; km_setboardid && saveenv && reset
+rootfsfile=${hostname}/rootfsImage
+setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value}
+tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi
+tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage}
+tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage
+set_uimage=printenv uimage || setenv uimage uImage
diff --git a/roms/u-boot/board/keymile/scripts/ramfs-ppc_82xx.txt b/roms/u-boot/board/keymile/scripts/ramfs-ppc_82xx.txt
new file mode 100644
index 00000000..87e984e1
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/ramfs-ppc_82xx.txt
@@ -0,0 +1 @@
+setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure
diff --git a/roms/u-boot/board/keymile/scripts/ramfs-ppc_8xx.txt b/roms/u-boot/board/keymile/scripts/ramfs-ppc_8xx.txt
new file mode 100644
index 00000000..87e984e1
--- /dev/null
+++ b/roms/u-boot/board/keymile/scripts/ramfs-ppc_8xx.txt
@@ -0,0 +1 @@
+setup_debug_env=tftpboot 0x200000 scripts/ramfs-common.txt && env import -t 0x200000 ${filesize} && run configure