Initial import of qemu-2.4.1HEADmaster

3 files changed, 558 insertions, 0 deletions

diff --git a/roms/u-boot/board/esd/pmc405de/Makefile b/roms/u-boot/board/esd/pmc405de/Makefile
new file mode 100644
index 00000000..b3f6dcd1
--- /dev/null
+++ b/roms/u-boot/board/esd/pmc405de/Makefile
@@ -0,0 +1,10 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	= pmc405de.o
+obj-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o
+obj-y += ../common/cmd_loadpci.o
diff --git a/roms/u-boot/board/esd/pmc405de/chip_config.c b/roms/u-boot/board/esd/pmc405de/chip_config.c
new file mode 100644
index 00000000..c06a6aeb
--- /dev/null
+++ b/roms/u-boot/board/esd/pmc405de/chip_config.c
@@ -0,0 +1,44 @@
+/*
+ * (C) Copyright 2008-2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ppc4xx_config.h>
+
+struct ppc4xx_config ppc4xx_config_val[] = {
+	{
+		"133",
+		"CPU: 133 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
+		{
+			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x40, 0x12, 0x12, 0x42, 0x3e, 0x00, 0x00
+		}
+	},
+	{
+		"266",
+		"CPU: 266 PLB: 133 OPB: 66 EBC: 44 PCI: 44/66",
+		{
+			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x50, 0x22, 0x2d, 0x42, 0x3e, 0x00, 0x00
+		}
+	},
+	{
+		"333",
+		"CPU: 333 PLB: 111 OPB: 55 EBC: 55 PCI: 55/111",
+		{
+			0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+			0x00, 0x60, 0x29, 0x2d, 0x42, 0xbe, 0x00, 0x00
+		}
+	},
+};
+
+int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val);
diff --git a/roms/u-boot/board/esd/pmc405de/pmc405de.c b/roms/u-boot/board/esd/pmc405de/pmc405de.c
new file mode 100644
index 00000000..4409ea65
--- /dev/null
+++ b/roms/u-boot/board/esd/pmc405de/pmc405de.c
@@ -0,0 +1,504 @@
+/*
+ * (C) Copyright 2009
+ * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd.eu
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+#include <asm/4xx_pci.h>
+#include <command.h>
+#include <malloc.h>
+
+/*
+ * PMC405-DE cpld registers
+ * - all registers are 8 bit
+ * - all registers are on 32 bit addesses
+ */
+struct pmc405de_cpld {
+	/* cpld design version */
+	u8 version;
+	u8 reserved0[3];
+
+	/* misc. status lines */
+	u8 status;
+	u8 reserved1[3];
+
+	/*
+	 * gated control flags
+	 * gate bit(s) must be written with '1' to
+	 * access control flag
+	 */
+	u8 control;
+	u8 reserved2[3];
+};
+
+#define CPLD_VERSION_MASK		0x0f
+#define CPLD_CONTROL_POSTLED_N		0x01
+#define CPLD_CONTROL_POSTLED_GATE	0x02
+#define CPLD_CONTROL_RESETOUT_N		0x40
+#define CPLD_CONTROL_RESETOUT_N_GATE	0x80
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern void __ft_board_setup(void *blob, bd_t *bd);
+extern void pll_write(u32 a, u32 b);
+
+static int wait_for_pci_ready_done;
+
+static int is_monarch(void);
+static int pci_is_66mhz(void);
+static int board_revision(void);
+static int cpld_revision(void);
+static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div);
+
+int board_early_init_f(void)
+{
+	u32 pllmr0, pllmr1;
+
+	/*
+	 * check M66EN and patch PLB:PCI divider for 66MHz PCI
+	 *
+	 * fCPU==333MHz && fPCI==66MHz (PLBDiv==3 && M66EN==1): PLB/PCI=1
+	 * fCPU==333MHz && fPCI==33MHz (PLBDiv==3 && M66EN==0): PLB/PCI=2
+	 * fCPU==133|266MHz && fPCI==66MHz (PLBDiv==1|2 && M66EN==1): PLB/PCI=2
+	 * fCPU==133|266MHz && fPCI==33MHz (PLBDiv==1|2 && M66EN==0): PLB/PCI=3
+	 *
+	 * calling upd_plb_pci_div() may end in calling pll_write() which will
+	 * do a chip reset and never return.
+	 */
+	pllmr0 = mfdcr(CPC0_PLLMR0);
+	pllmr1 = mfdcr(CPC0_PLLMR1);
+
+	if ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) == PLLMR0_CPU_PLB_DIV_3) {
+		/* fCPU=333MHz, fPLB=111MHz */
+		if (pci_is_66mhz())
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_1);
+		else
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
+	} else {
+		/* fCPU=133|266MHz, fPLB=133MHz */
+		if (pci_is_66mhz())
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_2);
+		else
+			upd_plb_pci_div(pllmr0, pllmr1, PLLMR0_PCI_PLB_DIV_3);
+	}
+
+	/*
+	 * IRQ 25 (EXT IRQ 0) PCI-INTA#; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) PCI-INTB#; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) PCI-INTC#; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) PCI-INTD#; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) ETH0-PHY-IRQ#; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) ETH1-PHY-IRQ#; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) PLD-IRQ#; active low; level sensitive
+	 */
+	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
+	mtdcr(UIC0ER, 0x00000000);       /* disable all ints */
+	mtdcr(UIC0CR, 0x00000000);       /* set all to be non-critical*/
+	mtdcr(UIC0PR, 0xFFFFFF80);       /* set int polarities */
+	mtdcr(UIC0TR, 0x10000000);       /* set int trigger levels */
+	mtdcr(UIC0VCR, 0x00000001);      /* set vect base=0, INT0 highest prio */
+	mtdcr(UIC0SR, 0xFFFFFFFF);       /* clear all ints */
+
+	/*
+	 * EBC Configuration Register:
+	 * - set ready timeout to 512 ebc-clks -> ca. 15 us
+	 * - EBC lines are always driven
+	 */
+	mtebc(EBC0_CFG, 0xa8400000);
+
+	return 0;
+}
+
+static void upd_plb_pci_div(u32 pllmr0, u32 pllmr1, u32 div)
+{
+	if ((pllmr0 & PLLMR0_PCI_TO_PLB_MASK) != div)
+		pll_write((pllmr0 & ~PLLMR0_PCI_TO_PLB_MASK) | div, pllmr1);
+}
+
+int misc_init_r(void)
+{
+	int i;
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	struct pmc405de_cpld *cpld =
+		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+
+	if (!is_monarch()) {
+		/* PCI configuration done: release EREADY */
+		setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EREADY);
+		setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_EREADY);
+	}
+
+	/* turn off POST LED */
+	out_8(&cpld->control,
+	      CPLD_CONTROL_POSTLED_N | CPLD_CONTROL_POSTLED_GATE);
+
+	/* turn on LEDs: RUN, A, B */
+	clrbits_be32(&gpio0->or,
+		     CONFIG_SYS_GPIO_LEDRUN_N |
+		     CONFIG_SYS_GPIO_LEDA_N |
+		     CONFIG_SYS_GPIO_LEDB_N);
+
+	for (i=0; i < 200; i++)
+		udelay(1000);
+
+	/* turn off LEDs: A, B */
+	setbits_be32(&gpio0->or,
+		     CONFIG_SYS_GPIO_LEDA_N |
+		     CONFIG_SYS_GPIO_LEDB_N);
+
+	return (0);
+}
+
+static int is_monarch(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_MONARCH_N) == 0;
+}
+
+static int pci_is_66mhz(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	return (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_M66EN);
+}
+
+static int board_revision(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	return ((in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_HWREV_MASK) >>
+		CONFIG_SYS_GPIO_HWREV_SHIFT);
+}
+
+static int cpld_revision(void)
+{
+	struct pmc405de_cpld *cpld =
+		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+	return ((in_8(&cpld->version) & CPLD_VERSION_MASK));
+}
+
+/*
+ * Check Board Identity
+ */
+int checkboard(void)
+{
+	puts("Board: esd GmbH - PMC-CPU/405-DE");
+
+	gd->board_type = board_revision();
+	printf(", Rev 1.%ld, ", gd->board_type);
+
+	if (!is_monarch())
+		puts("non-");
+
+	printf("monarch, PCI=%s MHz, PLD-Rev 1.%d\n",
+	       pci_is_66mhz() ? "66" : "33", cpld_revision());
+
+	return 0;
+}
+
+
+static void wait_for_pci_ready(void)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	int i;
+	char *s = getenv("pcidelay");
+
+	/* only wait once */
+	if (wait_for_pci_ready_done)
+		return;
+
+	/*
+	 * We have our own handling of the pcidelay variable.
+	 * Using CONFIG_PCI_BOOTDELAY enables pausing for host
+	 * and adapter devices. For adapter devices we do not
+	 * want this.
+	 */
+	if (s) {
+		int ms = simple_strtoul(s, NULL, 10);
+		printf("PCI:   Waiting for %d ms\n", ms);
+		for (i=0; i<ms; i++)
+			udelay(1000);
+	}
+
+	if (!(in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY)) {
+		printf("PCI:   Waiting for EREADY (CTRL-C to skip) ... ");
+		while (1) {
+			if (ctrlc()) {
+				puts("abort\n");
+				break;
+			}
+			if (in_be32(&gpio0->ir) & CONFIG_SYS_GPIO_EREADY) {
+				printf("done\n");
+				break;
+			}
+		}
+	}
+
+	wait_for_pci_ready_done = 1;
+}
+
+/*
+ * Overwrite weak is_pci_host()
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ */
+int is_pci_host(struct pci_controller *hose)
+{
+	char *s;
+
+	if (!is_monarch()) {
+		/*
+		 * Overwrite PCI identification when running in
+		 * non-monarch mode
+		 * This should be moved into pci_target_init()
+		 * when it is sometimes available for 405 CPUs
+		 */
+		pci_write_config_word(PCIDEVID_405GP,
+				      PCI_SUBSYSTEM_ID,
+				      CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH);
+		pci_write_config_word(PCIDEVID_405GP,
+				      PCI_CLASS_SUB_CODE,
+				      CONFIG_SYS_PCI_CLASSCODE_NONMONARCH);
+	}
+
+	s = getenv("pciscan");
+	if (s == NULL) {
+		if (is_monarch()) {
+			wait_for_pci_ready();
+			return 1;
+		} else {
+			return 0;
+		}
+	} else {
+		if (!strcmp(s, "yes"))
+			return 1;
+	}
+
+	return 0;
+}
+
+/*
+ * Overwrite weak pci_pre_init()
+ *
+ * The default implementation enables the 405EP
+ * internal PCI arbiter. We do not want that
+ * on a PMC module.
+ */
+int pci_pre_init(struct pci_controller *hose)
+{
+	return 1;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	int rc;
+
+	__ft_board_setup(blob, bd);
+
+	/*
+	 * Disable PCI in non-monarch mode.
+	 */
+	if (!is_monarch()) {
+		rc = fdt_find_and_setprop(blob, "/plb/pci@ec000000", "status",
+					  "disabled", sizeof("disabled"), 1);
+		if (rc) {
+			printf("Unable to update property status in PCI node, "
+			       "err=%s\n",
+			       fdt_strerror(rc));
+		}
+	}
+}
+#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#if defined(CONFIG_SYS_EEPROM_WREN)
+/* Input: <dev_addr>  I2C address of EEPROM device to enable.
+ *         <state>     -1: deliver current state
+ *                      0: disable write
+ *                      1: enable write
+ * Returns:            -1: wrong device address
+ *                      0: dis-/en- able done
+ *                    0/1: current state if <state> was -1.
+ */
+int eeprom_write_enable(unsigned dev_addr, int state)
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+
+	if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
+		return -1;
+	} else {
+		switch (state) {
+		case 1:
+			/* Enable write access, clear bit GPIO0. */
+			clrbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
+			state = 0;
+			break;
+		case 0:
+			/* Disable write access, set bit GPIO0. */
+			setbits_be32(&gpio0->or, CONFIG_SYS_GPIO_EEPROM_WP);
+			state = 0;
+			break;
+		default:
+			/* Read current status back. */
+			state = (0 == (in_be32(&gpio0->or) &
+				       CONFIG_SYS_GPIO_EEPROM_WP));
+			break;
+		}
+	}
+	return state;
+}
+
+int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	int query = argc == 1;
+	int state = 0;
+
+	if (query) {
+		/* Query write access state. */
+		state = eeprom_write_enable(CONFIG_SYS_I2C_EEPROM_ADDR, - 1);
+		if (state < 0) {
+			puts("Query of write access state failed.\n");
+		} else {
+			printf("Write access for device 0x%0x is %sabled.\n",
+				CONFIG_SYS_I2C_EEPROM_ADDR,
+				state ? "en" : "dis");
+			state = 0;
+		}
+	} else {
+		if ('0' == argv[1][0]) {
+			/* Disable write access. */
+			state = eeprom_write_enable(
+				CONFIG_SYS_I2C_EEPROM_ADDR, 0);
+		} else {
+			/* Enable write access. */
+			state = eeprom_write_enable(
+				CONFIG_SYS_I2C_EEPROM_ADDR, 1);
+		}
+		if (state < 0)
+			puts ("Setup of write access state failed.\n");
+	}
+
+	return state;
+}
+
+U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
+	"Enable / disable / query EEPROM write access",
+	""
+);
+#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
+
+#if defined(CONFIG_PRAM)
+#include <environment.h>
+
+int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u32 pram, nextbase, base;
+	char *v;
+	u32 param;
+	ulong *lptr;
+
+	v = getenv("pram");
+	if (v)
+		pram = simple_strtoul(v, NULL, 10);
+	else {
+		printf("Error: pram undefined. Please define pram in KiB\n");
+		return 1;
+	}
+
+	base = gd->bd->bi_memsize;
+#if defined(CONFIG_LOGBUFFER)
+	base -= LOGBUFF_LEN + LOGBUFF_OVERHEAD;
+#endif
+	/*
+	 * gd->bd->bi_memsize == physical ram size - CONFIG_SYS_MM_TOP_HIDE
+	 */
+	param = base - (pram << 10);
+	printf("PARAM: @%08x\n", param);
+	debug("memsize=0x%08x, base=0x%08x\n", (u32)gd->bd->bi_memsize, base);
+
+	/* clear entire PA ram */
+	memset((void*)param, 0, (pram << 10));
+
+	/* reserve 4k for pointer field */
+	nextbase = base - 4096;
+	lptr = (ulong*)(base);
+
+	/*
+	 * *(--lptr) = item_size;
+	 * *(--lptr) = base - item_base = distance from field top;
+	 */
+
+	/* env is first (4k aligned) */
+	nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
+	memcpy((void*)nextbase, env_ptr, CONFIG_ENV_SIZE);
+	*(--lptr) = CONFIG_ENV_SIZE;     /* size */
+	*(--lptr) = base - nextbase;  /* offset | type=0 */
+
+	/* free section */
+	*(--lptr) = nextbase - param; /* size */
+	*(--lptr) = (base - param) | 126; /* offset | type=126 */
+
+	/* terminate pointer field */
+	*(--lptr) = crc32(0, (void*)(base - 0x10), 0x10);
+	*(--lptr) = 0;                /* offset=0 -> terminator */
+	return 0;
+}
+U_BOOT_CMD(
+	painit,	1,	1,	do_painit,
+	"prepare PciAccess system",
+	""
+);
+#endif /* CONFIG_PRAM */
+
+int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct ppc4xx_gpio *gpio0 = (struct ppc4xx_gpio *)GPIO_BASE;
+	setbits_be32(&gpio0->tcr, CONFIG_SYS_GPIO_SELFRST_N);
+	return 0;
+}
+U_BOOT_CMD(
+	selfreset,	1,	1,	do_selfreset,
+	"assert self-reset# signal",
+	""
+);
+
+int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct pmc405de_cpld *cpld =
+		(struct pmc405de_cpld *)CONFIG_SYS_CPLD_BASE;
+
+	if (argc > 1) {
+		if (argv[1][0] == '0') {
+			/* assert */
+			printf("PMC-RESETOUT# asserted\n");
+			out_8(&cpld->control,
+			      CPLD_CONTROL_RESETOUT_N_GATE);
+		} else {
+			/* deassert */
+			printf("PMC-RESETOUT# deasserted\n");
+			out_8(&cpld->control,
+			      CPLD_CONTROL_RESETOUT_N |
+			      CPLD_CONTROL_RESETOUT_N_GATE);
+		}
+	} else {
+		printf("PMC-RESETOUT# is %s\n",
+		       (in_8(&cpld->control) & CPLD_CONTROL_RESETOUT_N) ?
+		       "inactive" : "active");
+	}
+	return 0;
+}
+U_BOOT_CMD(
+	resetout,	2,	1,	do_resetout,
+	"assert PMC-RESETOUT# signal",
+	""
+);