Initial import of qemu-2.4.1HEADmaster

12 files changed, 2334 insertions, 0 deletions

diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/Makefile b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/Makefile
new file mode 100644
index 00000000..f31fe756
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/Makefile
@@ -0,0 +1,13 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+extra-y	= start.o
+obj-y	= cache.o kgdb.o io.o
+obj-y	+= traps.o cpu.o cpu_init.o speed.o interrupts.o
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cache.S b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cache.S
new file mode 100644
index 00000000..66c72983
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cache.S
@@ -0,0 +1,404 @@
+#include <config.h>
+#include <74xx_7xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#ifndef CACHE_LINE_SIZE
+# define CACHE_LINE_SIZE L1_CACHE_BYTES
+#endif
+
+#if CACHE_LINE_SIZE == 128
+#define LG_CACHE_LINE_SIZE 7
+#elif CACHE_LINE_SIZE == 32
+#define LG_CACHE_LINE_SIZE 5
+#elif CACHE_LINE_SIZE == 16
+#define LG_CACHE_LINE_SIZE 4
+#elif CACHE_LINE_SIZE == 8
+#define LG_CACHE_LINE_SIZE 3
+#else
+# error "Invalid cache line size!"
+#endif
+
+/*
+ * Invalidate L1 instruction cache.
+ */
+_GLOBAL(invalidate_l1_instruction_cache)
+	mfspr	r3,PVR
+	rlwinm	r3,r3,16,16,31
+	cmpi	0,r3,1
+	beqlr			/* for 601, do nothing */
+	/* 603/604 processor - use invalidate-all bit in HID0 */
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_ICFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Invalidate L1 data cache.
+ */
+_GLOBAL(invalidate_l1_data_cache)
+	mfspr	r3,HID0
+	ori	r3,r3,HID0_DCFI
+	mtspr	HID0,r3
+	isync
+	blr
+
+/*
+ * Flush data cache.
+ */
+_GLOBAL(flush_dcache)
+	lis	r3,0
+	lis	r5,CACHE_LINE_SIZE
+flush:
+	cmp	0,1,r3,r5
+	bge	done
+	lwz	r5,0(r3)
+	lis	r5,CACHE_LINE_SIZE
+	addi	r3,r3,0x4
+	b	flush
+done:
+	blr
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ * This is a no-op on the 601.
+ *
+ * flush_icache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_icache_range)
+	mfspr	r5,PVR
+	rlwinm	r5,r5,16,16,31
+	cmpi	0,r5,1
+	beqlr				/* for 601, do nothing */
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	2b
+	sync				/* additional sync needed on g4 */
+	isync
+	blr
+/*
+ * Write any modified data cache blocks out to memory.
+ * Does not invalidate the corresponding cache lines (especially for
+ * any corresponding instruction cache).
+ *
+ * clean_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(clean_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5	/* align r3 down to cache line */
+	subf	r4,r3,r4	/* r4 = offset of stop from start of cache line */
+	add	r4,r4,r5	/* r4 += cache_line_size-1 */
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE  /* r4 = number of cache lines to flush */
+	beqlr				  /* if r4 == 0 return */
+	mtctr	r4			  /* ctr = r4 */
+
+	sync
+1:	dcbst	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	blr
+
+/*
+ * Write any modified data cache blocks out to memory
+ * and invalidate the corresponding instruction cache blocks.
+ *
+ * flush_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(flush_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbf	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbf's to get to ram */
+	blr
+
+/*
+ * Like above, but invalidate the D-cache.  This is used by the 8xx
+ * to invalidate the cache so the PPC core doesn't get stale data
+ * from the CPM (no cache snooping here :-).
+ *
+ * invalidate_dcache_range(unsigned long start, unsigned long stop)
+ */
+_GLOBAL(invalidate_dcache_range)
+	li	r5,CACHE_LINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,LG_CACHE_LINE_SIZE
+	beqlr
+	mtctr	r4
+
+	sync
+1:	dcbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbi's to get to ram */
+	blr
+
+/*
+ * Flush a particular page from the data cache to RAM.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_page_to_ram(void *page)
+ */
+_GLOBAL(__flush_page_to_ram)
+	mfspr	r5,PVR
+	rlwinm	r5,r5,16,16,31
+	cmpi	0,r5,1
+	beqlr				/* for 601, do nothing */
+	rlwinm	r3,r3,0,0,19		/* Get page base address */
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+	mr	r6,r3
+0:	dcbst	0,r3			/* Write line to ram */
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	0b
+	sync
+	mtctr	r4
+1:	icbi	0,r6
+	addi	r6,r6,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Flush a particular page from the instruction cache.
+ * Note: this is necessary because the instruction cache does *not*
+ * snoop from the data cache.
+ * This is a no-op on the 601 which has a unified cache.
+ *
+ *	void __flush_icache_page(void *page)
+ */
+_GLOBAL(__flush_icache_page)
+	mfspr	r5,PVR
+	rlwinm	r5,r5,16,16,31
+	cmpi	0,r5,1
+	beqlr				/* for 601, do nothing */
+	li	r4,4096/CACHE_LINE_SIZE	/* Number of lines in a page */
+	mtctr	r4
+1:	icbi	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	sync
+	isync
+	blr
+
+/*
+ * Clear a page using the dcbz instruction, which doesn't cause any
+ * memory traffic (except to write out any cache lines which get
+ * displaced).  This only works on cacheable memory.
+ */
+_GLOBAL(clear_page)
+	li	r0,4096/CACHE_LINE_SIZE
+	mtctr	r0
+1:	dcbz	0,r3
+	addi	r3,r3,CACHE_LINE_SIZE
+	bdnz	1b
+	blr
+
+/*
+ * Enable L1 Instruction cache
+ */
+_GLOBAL(icache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_ICFI|HID0_ILOCK
+	andc	r3, r3, r5
+	ori	r3, r3, HID0_ICE
+	ori	r5, r3, HID0_ICFI
+	mtspr	HID0, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Disable L1 Instruction cache
+ */
+_GLOBAL(icache_disable)
+	mflr	r4
+	bl	invalidate_l1_instruction_cache		/* uses r3 */
+	sync
+	mtlr	r4
+	mfspr	r3, HID0
+	li	r5, 0
+	ori	r5, r5, HID0_ICE
+	andc	r3, r3, r5
+	mtspr	HID0, r3
+	isync
+	blr
+
+/*
+ * Is instruction cache enabled?
+ */
+_GLOBAL(icache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_ICE
+	blr
+
+
+_GLOBAL(l1dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+	blr
+
+/*
+ * Enable data cache(s) - L1 and optionally L2
+ * Calls l2cache_enable. LR saved in r5
+ */
+_GLOBAL(dcache_enable)
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	ori	r3, r3, HID0_DCE
+	ori	r5, r3, HID0_DCFI
+	mtspr	HID0, r5		/* enable + invalidate */
+	mtspr	HID0, r3		/* enable */
+	sync
+#ifdef CONFIG_SYS_L2
+	mflr	r5
+	bl	l2cache_enable		/* uses r3 and r4 */
+	sync
+	mtlr	r5
+#endif
+	blr
+
+
+/*
+ * Disable data cache(s) - L1 and optionally L2
+ * Calls flush_dcache and l2cache_disable_no_flush.
+ * LR saved in r4
+ */
+_GLOBAL(dcache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_dcache	/* uses r3 and r5 */
+	sync
+	mfspr	r3, HID0
+	li	r5, HID0_DCFI|HID0_DLOCK
+	andc	r3, r3, r5
+	mtspr	HID0, r3		/* no invalidate, unlock */
+	li	r5, HID0_DCE|HID0_DCFI
+	andc	r3, r3, r5		/* no enable, no invalidate */
+	mtspr	HID0, r3
+	sync
+#ifdef CONFIG_SYS_L2
+	bl	l2cache_disable_no_flush /* uses r3 */
+#endif
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Is data cache enabled?
+ */
+_GLOBAL(dcache_status)
+	mfspr	r3, HID0
+	andi.	r3, r3, HID0_DCE
+	blr
+
+/*
+ * Invalidate L2 cache using L2I and polling L2IP or L2I
+ */
+_GLOBAL(l2cache_invalidate)
+	sync
+	mfspr r3, l2cr
+	oris	r3, r3, L2CR_L2I@h
+	sync
+	mtspr	l2cr, r3
+	sync
+	mfspr r3, PVR
+	sync
+	rlwinm r3, r3, 16,16,31
+	cmpli 0,r3,0x8000  /* 7451, 7441 */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8001  /* 7455, 7445 */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8002  /* 7457, 7447 */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8003  /* 7447A */
+	beq 0,inv_7450
+	cmpli 0,r3,0x8004  /* 7448 */
+	beq 0,inv_7450
+invl2:
+	mfspr	r3, l2cr
+	andi.	r3, r3, L2CR_L2IP
+	bne	invl2
+	/* turn off the global invalidate bit */
+	mfspr	r3, l2cr
+	rlwinm	r3, r3, 0, 11, 9
+	sync
+	mtspr	l2cr, r3
+	sync
+	blr
+inv_7450:
+	mfspr	r3, l2cr
+	andis. r3, r3, L2CR_L2I@h
+	bne inv_7450
+	blr
+
+/*
+ * Enable L2 cache
+ * Calls l2cache_invalidate. LR is saved in r4
+ */
+_GLOBAL(l2cache_enable)
+	mflr	r4			/* save link register */
+	bl	l2cache_invalidate	/* uses r3 */
+	sync
+	lis	r3, L2_ENABLE@h
+	ori	r3, r3, L2_ENABLE@l
+	mtspr	l2cr, r3
+	isync
+	mtlr	r4			/* restore link register */
+	blr
+
+/*
+ * Disable L2 cache
+ * Calls flush_dcache. LR is saved in r4
+ */
+_GLOBAL(l2cache_disable)
+	mflr	r4			/* save link register */
+	bl	flush_dcache		/* uses r3 and r5 */
+	sync
+	mtlr	r4			/* restore link register */
+l2cache_disable_no_flush:		/* provide way to disable L2 w/o flushing */
+	lis	r3, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	mtspr	l2cr, r3
+	isync
+	blr
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/config.mk b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/config.mk
new file mode 100644
index 00000000..96812a02
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/config.mk
@@ -0,0 +1,8 @@
+#
+# (C) Copyright 2001
+# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -mstring
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cpu.c b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cpu.c
new file mode 100644
index 00000000..6cd54bf9
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cpu.c
@@ -0,0 +1,300 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * cpu.c
+ *
+ * CPU specific code
+ *
+ * written or collected and sometimes rewritten by
+ * Magnus Damm <damm@bitsmart.com>
+ *
+ * minor modifications by
+ * Wolfgang Denk <wd@denx.de>
+ *
+ * more modifications by
+ * Josh Huber <huber@mclx.com>
+ * added support for the 74xx series of cpus
+ * added support for the 7xx series of cpus
+ * made the code a little less hard-coded, and more auto-detectish
+ */
+
+#include <common.h>
+#include <command.h>
+#include <74xx_7xx.h>
+#include <asm/cache.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+cpu_t
+get_cpu_type(void)
+{
+	uint pvr = get_pvr();
+	cpu_t type;
+
+	type = CPU_UNKNOWN;
+
+	switch (PVR_VER(pvr)) {
+	case 0x000c:
+		type = CPU_7400;
+		break;
+	case 0x0008:
+		type = CPU_750;
+
+		if (((pvr >> 8) & 0xff) == 0x01) {
+			type = CPU_750CX;	/* old CX (80100 and 8010x?)*/
+		} else if (((pvr >> 8) & 0xff) == 0x22) {
+			type = CPU_750CX;	/* CX (82201,82202) and CXe (82214) */
+		} else if (((pvr >> 8) & 0xff) == 0x33) {
+			type = CPU_750CX;	/* CXe (83311) */
+		} else if (((pvr >> 12) & 0xF) == 0x3) {
+			type = CPU_755;
+		}
+		break;
+
+	case 0x7000:
+		type = CPU_750FX;
+		break;
+
+	case 0x7002:
+		type = CPU_750GX;
+		break;
+
+	case 0x800C:
+		type = CPU_7410;
+		break;
+
+	case 0x8000:
+		type = CPU_7450;
+		break;
+
+	case 0x8001:
+		type = CPU_7455;
+		break;
+
+	case 0x8002:
+		type = CPU_7457;
+		break;
+
+	case 0x8003:
+		type = CPU_7447A;
+		break;
+
+	case 0x8004:
+		type = CPU_7448;
+		break;
+
+	default:
+		break;
+	}
+
+	return type;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if !defined(CONFIG_BAB7xx)
+int checkcpu (void)
+{
+	uint type   = get_cpu_type();
+	uint pvr    = get_pvr();
+	ulong clock = gd->cpu_clk;
+	char buf[32];
+	char *str;
+
+	puts ("CPU:   ");
+
+	switch (type) {
+	case CPU_750CX:
+		printf ("750CX%s v%d.%d", (pvr&0xf0)?"e":"",
+			(pvr>>8) & 0xf,
+			pvr & 0xf);
+		goto	PR_CLK;
+
+	case CPU_750:
+		str = "750";
+		break;
+
+	case CPU_750FX:
+		str = "750FX";
+		break;
+
+	case CPU_750GX:
+		str = "750GX";
+		break;
+
+	case CPU_755:
+		str = "755";
+		break;
+
+	case CPU_7400:
+		str = "MPC7400";
+		break;
+
+	case CPU_7410:
+		str = "MPC7410";
+		break;
+
+	case CPU_7447A:
+		str = "MPC7447A";
+		break;
+
+	case CPU_7448:
+		str = "MPC7448";
+		break;
+
+	case CPU_7450:
+		str = "MPC7450";
+		break;
+
+	case CPU_7455:
+		str = "MPC7455";
+		break;
+
+	case CPU_7457:
+		str = "MPC7457";
+		break;
+
+	default:
+		printf("Unknown CPU -- PVR: 0x%08x\n", pvr);
+		return -1;
+	}
+
+	printf ("%s v%d.%d", str, (pvr >> 8) & 0xFF, pvr & 0xFF);
+PR_CLK:
+	printf (" @ %s MHz\n", strmhz(buf, clock));
+
+	return (0);
+}
+#endif
+/* these two functions are unimplemented currently [josh] */
+
+/* -------------------------------------------------------------------- */
+/* L1 i-cache								*/
+
+int
+checkicache(void)
+{
+	return 0; /* XXX */
+}
+
+/* -------------------------------------------------------------------- */
+/* L1 d-cache								*/
+
+int
+checkdcache(void)
+{
+	return 0; /* XXX */
+}
+
+/* -------------------------------------------------------------------- */
+
+static inline void
+soft_restart(unsigned long addr)
+{
+	/* SRR0 has system reset vector, SRR1 has default MSR value */
+	/* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
+
+	__asm__ __volatile__ ("mtspr	26, %0"		:: "r" (addr));
+	__asm__ __volatile__ ("li	4, (1 << 6)"	::: "r4");
+	__asm__ __volatile__ ("mtspr	27, 4");
+	__asm__ __volatile__ ("rfi");
+
+	while(1);	/* not reached */
+}
+
+
+#if !defined(CONFIG_BAB7xx)  && \
+    !defined(CONFIG_ELPPC)   && \
+    !defined(CONFIG_PPMC7XX)
+/* no generic way to do board reset. simply call soft_reset. */
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	ulong addr;
+	/* flush and disable I/D cache */
+	__asm__ __volatile__ ("mfspr	3, 1008"	::: "r3");
+	__asm__ __volatile__ ("ori	5, 5, 0xcc00"	::: "r5");
+	__asm__ __volatile__ ("ori	4, 3, 0xc00"	::: "r4");
+	__asm__ __volatile__ ("andc	5, 3, 5"	::: "r5");
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("mtspr	1008, 4");
+	__asm__ __volatile__ ("isync");
+	__asm__ __volatile__ ("sync");
+	__asm__ __volatile__ ("mtspr	1008, 5");
+	__asm__ __volatile__ ("isync");
+	__asm__ __volatile__ ("sync");
+
+#ifdef CONFIG_SYS_RESET_ADDRESS
+	addr = CONFIG_SYS_RESET_ADDRESS;
+#else
+	/*
+	 * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
+	 * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
+	 * address. Better pick an address known to be invalid on your
+	 * system and assign it to CONFIG_SYS_RESET_ADDRESS.
+	 */
+	addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
+#endif
+	soft_restart(addr);
+
+	/* not reached */
+	while(1)
+		;
+
+	return 1;
+}
+#endif
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
+ */
+#ifndef CONFIG_SYS_BUS_CLK
+#define	CONFIG_SYS_BUS_CLK gd->bus_clk
+#endif
+
+unsigned long get_tbclk(void)
+{
+	return CONFIG_SYS_BUS_CLK / 4;
+}
+
+/* ------------------------------------------------------------------------- */
+
+#if defined(CONFIG_WATCHDOG)
+#if !defined(CONFIG_BAB7xx)
+void
+watchdog_reset(void)
+{
+
+}
+#endif  /* !CONFIG_BAB7xx */
+#endif	/* CONFIG_WATCHDOG */
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_OF_LIBFDT
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "timebase-frequency", bd->bi_busfreq / 4, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+			     "clock-frequency", bd->bi_intfreq, 1);
+
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+	fdt_fixup_ethernet(blob);
+}
+#endif
+/* ------------------------------------------------------------------------- */
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cpu_init.c b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cpu_init.c
new file mode 100644
index 00000000..a6a87884
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/cpu_init.c
@@ -0,0 +1,47 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * cpu_init.c - low level cpu init
+ *
+ * there's really nothing going on here yet.  future work area?
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+
+/*
+ * Breath some life into the CPU...
+ *
+ * there's basically nothing to do here since the memory controller
+ * isn't on the CPU in this case.
+ */
+void
+cpu_init_f (void)
+{
+	switch (get_cpu_type()) {
+	case CPU_7450:
+	case CPU_7455:
+	case CPU_7457:
+	case CPU_7447A:
+	case CPU_7448:
+		/* enable the timebase bit in HID0 */
+		set_hid0(get_hid0() | 0x4000000);
+		break;
+	default:
+		/* do nothing */
+		break;
+	}
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+	return (0);
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/interrupts.c b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/interrupts.c
new file mode 100644
index 00000000..a9062435
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/interrupts.c
@@ -0,0 +1,88 @@
+/*
+ * (C) Copyright 2001
+ * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * interrupts.c - just enough support for the decrementer/timer
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <mpc8xx_irq.h>
+#include <asm/processor.h>
+#include <commproc.h>
+#include <command.h>
+
+int interrupt_init_cpu (unsigned *decrementer_count)
+{
+	debug("interrupt_init: GT main cause reg: %08x:%08x\n",
+	       GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER),
+	       GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER));
+	debug("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
+	       GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER),
+	       GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER),
+	       GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER));
+	debug("interrupt_init: ethernet mask regs:  %08x %08x %08x\n",
+	       GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER),
+	       GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER),
+	       GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
+	debug("interrupt_init: setting decrementer_count\n");
+
+	*decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
+
+	return (0);
+}
+
+/****************************************************************************/
+
+/*
+ * Handle external interrupts
+ */
+void
+external_interrupt(struct pt_regs *regs)
+{
+	puts("external_interrupt (oops!)\n");
+}
+
+volatile ulong timestamp = 0;
+
+/*
+ * timer_interrupt - gets called when the decrementer overflows,
+ * with interrupts disabled.
+ * Trivial implementation - no need to be really accurate.
+ */
+void
+timer_interrupt_cpu (struct pt_regs *regs)
+{
+	/* nothing to do here */
+	return;
+}
+
+/****************************************************************************/
+
+/*
+ * Install and free a interrupt handler.
+ */
+
+void
+irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
+{
+
+}
+
+void
+irq_free_handler(int vec)
+{
+
+}
+
+/****************************************************************************/
+
+void
+do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char * const argv[])
+{
+	puts("IRQ related functions are unimplemented currently.\n");
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/io.S b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/io.S
new file mode 100644
index 00000000..3b4b08a8
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/io.S
@@ -0,0 +1,112 @@
+/*
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2001	Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *			Andreas Heppel <aheppel@sysgo.de>
+ *  Copyright (C) 2002	Wolfgang Denk <wd@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <ppc_asm.tmpl>
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     in8 */
+/*  Description:  Input 8 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  in8
+in8:
+	lbz     r3,0(r3)
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     in16 */
+/*  Description:  Input 16 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  in16
+in16:
+	lhz     r3,0(r3)
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     in16r */
+/*  Description:  Input 16 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+	.globl  in16r
+in16r:
+	lhbrx   r3,0,r3
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     in32 */
+/*  Description:  Input 32 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  in32
+in32:
+	lwz     3,0(3)
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     in32r */
+/*  Description:  Input 32 bits and byte reverse */
+/* ------------------------------------------------------------------------------- */
+    .globl  in32r
+in32r:
+	lwbrx   r3,0,r3
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     out8 */
+/*  Description:  Output 8 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  out8
+out8:
+	stb     r4,0(r3)
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     out16 */
+/*  Description:  Output 16 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  out16
+out16:
+	sth     r4,0(r3)
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     out16r */
+/*  Description:  Byte reverse and output 16 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  out16r
+out16r:
+	sthbrx  r4,0,r3
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     out32 */
+/*  Description:  Output 32 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  out32
+out32:
+	stw     r4,0(r3)
+	sync
+	blr
+
+/* ------------------------------------------------------------------------------- */
+/*  Function:     out32r */
+/*  Description:  Byte reverse and output 32 bits */
+/* ------------------------------------------------------------------------------- */
+	.globl  out32r
+out32r:
+	stwbrx  r4,0,r3
+	sync
+	blr
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/kgdb.S b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/kgdb.S
new file mode 100644
index 00000000..42b3a760
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/kgdb.S
@@ -0,0 +1,61 @@
+/*
+ *  Copyright (C) 2000	Murray Jensen <Murray.Jensen@cmst.csiro.au>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <command.h>
+#include <74xx_7xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#if defined(CONFIG_CMD_KGDB)
+
+ /*
+ * cache flushing routines for kgdb
+ */
+
+	.globl	kgdb_flush_cache_all
+kgdb_flush_cache_all:
+	lis	r3,0
+	addis	r4,r0,0x0040
+kgdb_flush_loop:
+	lwz	r5,0(r3)
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
+	cmp	0,0,r3,r4
+	bne	kgdb_flush_loop
+	SYNC
+	mfspr	r3,1008
+	ori	r3,r3,0x8800
+	mtspr	1008,r3
+	sync
+	blr
+
+	.globl	kgdb_flush_cache_range
+kgdb_flush_cache_range:
+	li	r5,CONFIG_SYS_CACHELINE_SIZE-1
+	andc	r3,r3,r5
+	subf	r4,r3,r4
+	add	r4,r4,r5
+	srwi.	r4,r4,CONFIG_SYS_CACHELINE_SHIFT
+	beqlr
+	mtctr	r4
+	mr	r6,r3
+1:	dcbst	0,r3
+	addi	r3,r3,CONFIG_SYS_CACHELINE_SIZE
+	bdnz	1b
+	sync				/* wait for dcbst's to get to ram */
+	mtctr	r4
+2:	icbi	0,r6
+	addi	r6,r6,CONFIG_SYS_CACHELINE_SIZE
+	bdnz	2b
+	SYNC
+	blr
+
+#endif
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/speed.c b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/speed.c
new file mode 100644
index 00000000..5ffa41cf
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/speed.c
@@ -0,0 +1,165 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern unsigned long get_board_bus_clk (void);
+
+static const int hid1_multipliers_x_10[] = {
+	25,	/* 0000 - 2.5x */
+	75,	/* 0001 - 7.5x */
+	70,	/* 0010 - 7x */
+	10,	/* 0011 - bypass */
+	20,	/* 0100 - 2x */
+	65,	/* 0101 - 6.5x */
+	100,	/* 0110 - 10x */
+	45,	/* 0111 - 4.5x */
+	30,	/* 1000 - 3x */
+	55,	/* 1001 - 5.5x */
+	40,	/* 1010 - 4x */
+	50,	/* 1011 - 5x */
+	80,	/* 1100 - 8x */
+	60,	/* 1101 - 6x */
+	35,	/* 1110 - 3.5x */
+	0	/* 1111 - off */
+};
+
+/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
+static const int hid1_74xx_multipliers_x_10[] = {
+	115,	/* 00000 - 11.5x  */
+	170,	/* 00001 - 17x    */
+	75,	/* 00010 -  7.5x  */
+	150,	/* 00011 - 15x    */
+	70,	/* 00100 -  7x    */
+	180,	/* 00101 - 18x    */
+	10,	/* 00110 - bypass */
+	200,	/* 00111 - 20x    */
+	20,	/* 01000 -  2x    */
+	210,	/* 01001 - 21x    */
+	65,	/* 01010 -  6.5x  */
+	130,	/* 01011 - 13x    */
+	85,	/* 01100 -  8.5x  */
+	240,	/* 01101 - 24x    */
+	95,	/* 01110 -  9.5x  */
+	90,	/* 01111 -  9x    */
+	30,	/* 10000 -  3x    */
+	105,	/* 10001 - 10.5x  */
+	55,	/* 10010 -  5.5x  */
+	110,	/* 10011 - 11x    */
+	40,	/* 10100 -  4x    */
+	100,	/* 10101 - 10x    */
+	50,	/* 10110 -  5x    */
+	120,	/* 10111 - 12x    */
+	80,	/* 11000 -  8x    */
+	140,	/* 11001 - 14x    */
+	60,	/* 11010 -  6x    */
+	160,	/* 11011 - 16x    */
+	135,	/* 11100 - 13.5x  */
+	280,	/* 11101 - 28x    */
+	0,	/* 11110 - off    */
+	125	/* 11111 - 12.5x  */
+};
+
+static const int hid1_fx_multipliers_x_10[] = {
+	00,	/* 0000 - off */
+	00,	/* 0001 - off */
+	10,	/* 0010 - bypass */
+	10,	/* 0011 - bypass */
+	20,	/* 0100 - 2x */
+	25,	/* 0101 - 2.5x */
+	30,	/* 0110 - 3x */
+	35,	/* 0111 - 3.5x */
+	40,	/* 1000 - 4x */
+	45,	/* 1001 - 4.5x */
+	50,	/* 1010 - 5x */
+	55,	/* 1011 - 5.5x */
+	60,	/* 1100 - 6x */
+	65,	/* 1101 - 6.5x */
+	70,	/* 1110 - 7x */
+	75,	/* 1111 - 7.5 */
+	80,	/* 10000 - 8x */
+	85,	/* 10001 - 8.5x */
+	90,	/* 10010 - 9x */
+	95,	/* 10011 - 9.5x */
+	100,	/* 10100 - 10x */
+	110,	/* 10101 - 11x */
+	120,	/* 10110 - 12x */
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Measure CPU clock speed (core clock GCLK1, GCLK2)
+ *
+ * (Approx. GCLK frequency in Hz)
+ */
+
+int get_clocks (void)
+{
+	ulong clock = 0;
+
+#ifdef CONFIG_SYS_BUS_CLK
+	gd->bus_clk = CONFIG_SYS_BUS_CLK;	/* bus clock is a fixed frequency */
+#else
+	gd->bus_clk = get_board_bus_clk ();	/* bus clock is configurable */
+#endif
+
+	/* calculate the clock frequency based upon the CPU type */
+	switch (get_cpu_type()) {
+	case CPU_7447A:
+	case CPU_7448:
+	case CPU_7455:
+	case CPU_7457:
+		/*
+		 * Make sure division is done before multiplication to prevent 32-bit
+		 * arithmetic overflows which will cause a negative number
+		 */
+		clock = (gd->bus_clk / 10) *
+			hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
+		break;
+
+	case CPU_750GX:
+	case CPU_750FX:
+		clock = (gd->bus_clk / 10) *
+			hid1_fx_multipliers_x_10[get_hid1 () >> 27];
+		break;
+
+	case CPU_7450:
+	case CPU_740:
+	case CPU_740P:
+	case CPU_745:
+	case CPU_750CX:
+	case CPU_750:
+	case CPU_750P:
+	case CPU_755:
+	case CPU_7400:
+	case CPU_7410:
+		/*
+		 * Make sure division is done before multiplication to prevent 32-bit
+		 * arithmetic overflows which will cause a negative number
+		 */
+		clock = (gd->bus_clk / 10) *
+			hid1_multipliers_x_10[get_hid1 () >> 28];
+		break;
+
+	case CPU_UNKNOWN:
+	       printf ("get_gclk_freq(): unknown CPU type\n");
+	       clock = 0;
+	       return (1);
+	}
+
+	gd->cpu_clk = clock;
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/start.S b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/start.S
new file mode 100644
index 00000000..b0e102c6
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/start.S
@@ -0,0 +1,840 @@
+/*
+ *  Copyright (C) 1998	Dan Malek <dmalek@jlc.net>
+ *  Copyright (C) 1999	Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
+ *  Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
+ *  Copyright (C) 2001  Josh Huber <huber@mclx.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*  U-Boot - Startup Code for PowerPC based Embedded Boards
+ *
+ *
+ *  The processor starts at 0xfff00100 and the code is executed
+ *  from flash. The code is organized to be at an other address
+ *  in memory, but as long we don't jump around before relocating.
+ *  board_init lies at a quite high address and when the cpu has
+ *  jumped there, everything is ok.
+ */
+#include <asm-offsets.h>
+#include <config.h>
+#include <74xx_7xx.h>
+#include <version.h>
+
+#include <ppc_asm.tmpl>
+#include <ppc_defs.h>
+
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/u-boot.h>
+
+#if !defined(CONFIG_DB64360) && \
+    !defined(CONFIG_DB64460) && \
+    !defined(CONFIG_CPCI750) && \
+    !defined(CONFIG_P3Mx)
+#include <galileo/gt64260R.h>
+#endif
+
+/* We don't want the  MMU yet.
+*/
+#undef	MSR_KERNEL
+/* Machine Check and Recoverable Interr. */
+#define MSR_KERNEL ( MSR_ME | MSR_RI )
+
+/*
+ * Set up GOT: Global Offset Table
+ *
+ * Use r12 to access the GOT
+ */
+	START_GOT
+	GOT_ENTRY(_GOT2_TABLE_)
+	GOT_ENTRY(_FIXUP_TABLE_)
+
+	GOT_ENTRY(_start)
+	GOT_ENTRY(_start_of_vectors)
+	GOT_ENTRY(_end_of_vectors)
+	GOT_ENTRY(transfer_to_handler)
+
+	GOT_ENTRY(__init_end)
+	GOT_ENTRY(__bss_end)
+	GOT_ENTRY(__bss_start)
+	END_GOT
+
+/*
+ * r3 - 1st arg to board_init(): IMMP pointer
+ * r4 - 2nd arg to board_init(): boot flag
+ */
+	.text
+	.long	0x27051956		/* U-Boot Magic Number		*/
+	.globl	version_string
+version_string:
+	.ascii U_BOOT_VERSION_STRING, "\0"
+
+	. = EXC_OFF_SYS_RESET
+	.globl	_start
+_start:
+	b	boot_cold
+
+	/* the boot code is located below the exception table */
+
+	.globl	_start_of_vectors
+_start_of_vectors:
+
+/* Machine check */
+	STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+
+/* Data Storage exception.  "Never" generated on the 860. */
+	STD_EXCEPTION(0x300, DataStorage, UnknownException)
+
+/* Instruction Storage exception.  "Never" generated on the 860. */
+	STD_EXCEPTION(0x400, InstStorage, UnknownException)
+
+/* External Interrupt exception. */
+	STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
+
+/* Alignment exception. */
+	. = 0x600
+Alignment:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	mfspr	r4,DAR
+	stw	r4,_DAR(r21)
+	mfspr	r5,DSISR
+	stw	r5,_DSISR(r21)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
+
+/* Program check exception */
+	. = 0x700
+ProgramCheck:
+	EXCEPTION_PROLOG(SRR0, SRR1)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
+		MSR_KERNEL, COPY_EE)
+
+	/* No FPU on MPC8xx.  This exception is not supposed to happen.
+	*/
+	STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
+
+	/* I guess we could implement decrementer, and may have
+	 * to someday for timekeeping.
+	 */
+	STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
+	STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
+	STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
+	STD_EXCEPTION(0xc00, SystemCall, UnknownException)
+	STD_EXCEPTION(0xd00, SingleStep, UnknownException)
+
+	STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
+	STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
+
+	/*
+	 * On the MPC8xx, this is a software emulation interrupt. It
+	 * occurs for all unimplemented and illegal instructions.
+	 */
+	STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
+
+	STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
+	STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
+	STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
+
+	STD_EXCEPTION(0x1500, Reserved5, UnknownException)
+	STD_EXCEPTION(0x1600, Reserved6, UnknownException)
+	STD_EXCEPTION(0x1700, Reserved7, UnknownException)
+	STD_EXCEPTION(0x1800, Reserved8, UnknownException)
+	STD_EXCEPTION(0x1900, Reserved9, UnknownException)
+	STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
+	STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
+
+	STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
+	STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
+
+	.globl	_end_of_vectors
+_end_of_vectors:
+
+	. = 0x2000
+
+boot_cold:
+	/* disable everything */
+	li	r0, 0
+	mtspr	HID0, r0
+	sync
+	mtmsr	0
+	bl	invalidate_bats
+	sync
+
+#ifdef CONFIG_SYS_L2
+	/* init the L2 cache */
+	addis	r3, r0, L2_INIT@h
+	ori	r3, r3, L2_INIT@l
+	sync
+	mtspr	l2cr, r3
+#endif
+#if defined(CONFIG_ALTIVEC) && defined(CONFIG_74xx)
+	.long	0x7e00066c
+		/*
+		 * dssall instruction, gas doesn't have it yet
+		 * ...for altivec, data stream stop all this probably
+		 * isn't needed unless we warm (software) reboot U-Boot
+		 */
+#endif
+
+#ifdef CONFIG_SYS_L2
+	/* invalidate the L2 cache */
+	bl	l2cache_invalidate
+	sync
+#endif
+#ifdef CONFIG_SYS_BOARD_ASM_INIT
+	/* do early init */
+	bl	board_asm_init
+#endif
+
+	/*
+	 * Calculate absolute address in FLASH and jump there
+	 *------------------------------------------------------*/
+	lis	r3, CONFIG_SYS_MONITOR_BASE@h
+	ori	r3, r3, CONFIG_SYS_MONITOR_BASE@l
+	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+	mtlr	r3
+	blr
+
+in_flash:
+	/* let the C-code set up the rest			*/
+	/*							*/
+	/* Be careful to keep code relocatable !		*/
+	/*------------------------------------------------------*/
+
+	/* perform low-level init */
+	/* sdram init, galileo init, etc */
+	/* r3:	NHR bit from HID0 */
+
+	/* setup the bats */
+	bl	setup_bats
+	sync
+
+	/*
+	 * Cache must be enabled here for stack-in-cache trick.
+	 * This means we need to enable the BATS.
+	 * This means:
+	 *   1) for the EVB, original gt regs need to be mapped
+	 *   2) need to have an IBAT for the 0xf region,
+	 *      we are running there!
+	 * Cache should be turned on after BATs, since by default
+	 * everything is write-through.
+	 * The init-mem BAT can be reused after reloc. The old
+	 * gt-regs BAT can be reused after board_init_f calls
+	 * board_early_init_f (EVB only).
+	 */
+#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
+	/* enable address translation */
+	bl	enable_addr_trans
+	sync
+
+	/* enable and invalidate the data cache */
+	bl	l1dcache_enable
+	sync
+#endif
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+	bl	lock_ram_in_cache
+	sync
+#endif
+
+	/* set up the stack pointer in our newly created
+	 * cache-ram (r1) */
+	lis	r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
+	ori	r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
+
+	li	r0, 0		/* Make room for stack frame header and	*/
+	stwu	r0, -4(r1)	/* clear final stack frame so that	*/
+	stwu	r0, -4(r1)	/* stack backtraces terminate cleanly	*/
+
+	GET_GOT			/* initialize GOT access	*/
+
+	/* run low-level CPU init code     (from Flash)	*/
+	bl	cpu_init_f
+	sync
+
+	/* run 1st part of board init code (from Flash)   */
+	bl	board_init_f
+	sync
+
+	/* NOTREACHED - board_init_f() does not return */
+
+	.globl	invalidate_bats
+invalidate_bats:
+	/* invalidate BATs */
+	mtspr	IBAT0U, r0
+	mtspr	IBAT1U, r0
+	mtspr	IBAT2U, r0
+	mtspr	IBAT3U, r0
+#ifdef CONFIG_HIGH_BATS
+	mtspr   IBAT4U, r0
+	mtspr   IBAT5U, r0
+	mtspr   IBAT6U, r0
+	mtspr   IBAT7U, r0
+#endif
+	isync
+	mtspr	DBAT0U, r0
+	mtspr	DBAT1U, r0
+	mtspr	DBAT2U, r0
+	mtspr	DBAT3U, r0
+#ifdef CONFIG_HIGH_BATS
+	mtspr   DBAT4U, r0
+	mtspr   DBAT5U, r0
+	mtspr   DBAT6U, r0
+	mtspr   DBAT7U, r0
+#endif
+	isync
+	sync
+	blr
+
+	/* setup_bats - set them up to some initial state */
+	.globl	setup_bats
+setup_bats:
+	addis	r0, r0, 0x0000
+
+	/* IBAT 0 */
+	addis	r4, r0, CONFIG_SYS_IBAT0L@h
+	ori	r4, r4, CONFIG_SYS_IBAT0L@l
+	addis	r3, r0, CONFIG_SYS_IBAT0U@h
+	ori	r3, r3, CONFIG_SYS_IBAT0U@l
+	mtspr	IBAT0L, r4
+	mtspr	IBAT0U, r3
+	isync
+
+	/* DBAT 0 */
+	addis	r4, r0, CONFIG_SYS_DBAT0L@h
+	ori	r4, r4, CONFIG_SYS_DBAT0L@l
+	addis	r3, r0, CONFIG_SYS_DBAT0U@h
+	ori	r3, r3, CONFIG_SYS_DBAT0U@l
+	mtspr	DBAT0L, r4
+	mtspr	DBAT0U, r3
+	isync
+
+	/* IBAT 1 */
+	addis	r4, r0, CONFIG_SYS_IBAT1L@h
+	ori	r4, r4, CONFIG_SYS_IBAT1L@l
+	addis	r3, r0, CONFIG_SYS_IBAT1U@h
+	ori	r3, r3, CONFIG_SYS_IBAT1U@l
+	mtspr	IBAT1L, r4
+	mtspr	IBAT1U, r3
+	isync
+
+	/* DBAT 1 */
+	addis	r4, r0, CONFIG_SYS_DBAT1L@h
+	ori	r4, r4, CONFIG_SYS_DBAT1L@l
+	addis	r3, r0, CONFIG_SYS_DBAT1U@h
+	ori	r3, r3, CONFIG_SYS_DBAT1U@l
+	mtspr	DBAT1L, r4
+	mtspr	DBAT1U, r3
+	isync
+
+	/* IBAT 2 */
+	addis	r4, r0, CONFIG_SYS_IBAT2L@h
+	ori	r4, r4, CONFIG_SYS_IBAT2L@l
+	addis	r3, r0, CONFIG_SYS_IBAT2U@h
+	ori	r3, r3, CONFIG_SYS_IBAT2U@l
+	mtspr	IBAT2L, r4
+	mtspr	IBAT2U, r3
+	isync
+
+	/* DBAT 2 */
+	addis	r4, r0, CONFIG_SYS_DBAT2L@h
+	ori	r4, r4, CONFIG_SYS_DBAT2L@l
+	addis	r3, r0, CONFIG_SYS_DBAT2U@h
+	ori	r3, r3, CONFIG_SYS_DBAT2U@l
+	mtspr	DBAT2L, r4
+	mtspr	DBAT2U, r3
+	isync
+
+	/* IBAT 3 */
+	addis	r4, r0, CONFIG_SYS_IBAT3L@h
+	ori	r4, r4, CONFIG_SYS_IBAT3L@l
+	addis	r3, r0, CONFIG_SYS_IBAT3U@h
+	ori	r3, r3, CONFIG_SYS_IBAT3U@l
+	mtspr	IBAT3L, r4
+	mtspr	IBAT3U, r3
+	isync
+
+	/* DBAT 3 */
+	addis	r4, r0, CONFIG_SYS_DBAT3L@h
+	ori	r4, r4, CONFIG_SYS_DBAT3L@l
+	addis	r3, r0, CONFIG_SYS_DBAT3U@h
+	ori	r3, r3, CONFIG_SYS_DBAT3U@l
+	mtspr	DBAT3L, r4
+	mtspr	DBAT3U, r3
+	isync
+
+#ifdef CONFIG_HIGH_BATS
+	/* IBAT 4 */
+	addis   r4, r0, CONFIG_SYS_IBAT4L@h
+	ori     r4, r4, CONFIG_SYS_IBAT4L@l
+	addis   r3, r0, CONFIG_SYS_IBAT4U@h
+	ori     r3, r3, CONFIG_SYS_IBAT4U@l
+	mtspr   IBAT4L, r4
+	mtspr   IBAT4U, r3
+	isync
+
+	/* DBAT 4 */
+	addis   r4, r0, CONFIG_SYS_DBAT4L@h
+	ori     r4, r4, CONFIG_SYS_DBAT4L@l
+	addis   r3, r0, CONFIG_SYS_DBAT4U@h
+	ori     r3, r3, CONFIG_SYS_DBAT4U@l
+	mtspr   DBAT4L, r4
+	mtspr   DBAT4U, r3
+	isync
+
+	/* IBAT 5 */
+	addis   r4, r0, CONFIG_SYS_IBAT5L@h
+	ori     r4, r4, CONFIG_SYS_IBAT5L@l
+	addis   r3, r0, CONFIG_SYS_IBAT5U@h
+	ori     r3, r3, CONFIG_SYS_IBAT5U@l
+	mtspr   IBAT5L, r4
+	mtspr   IBAT5U, r3
+	isync
+
+	/* DBAT 5 */
+	addis   r4, r0, CONFIG_SYS_DBAT5L@h
+	ori     r4, r4, CONFIG_SYS_DBAT5L@l
+	addis   r3, r0, CONFIG_SYS_DBAT5U@h
+	ori     r3, r3, CONFIG_SYS_DBAT5U@l
+	mtspr   DBAT5L, r4
+	mtspr   DBAT5U, r3
+	isync
+
+	/* IBAT 6 */
+	addis   r4, r0, CONFIG_SYS_IBAT6L@h
+	ori     r4, r4, CONFIG_SYS_IBAT6L@l
+	addis   r3, r0, CONFIG_SYS_IBAT6U@h
+	ori     r3, r3, CONFIG_SYS_IBAT6U@l
+	mtspr   IBAT6L, r4
+	mtspr   IBAT6U, r3
+	isync
+
+	/* DBAT 6 */
+	addis   r4, r0, CONFIG_SYS_DBAT6L@h
+	ori     r4, r4, CONFIG_SYS_DBAT6L@l
+	addis   r3, r0, CONFIG_SYS_DBAT6U@h
+	ori     r3, r3, CONFIG_SYS_DBAT6U@l
+	mtspr   DBAT6L, r4
+	mtspr   DBAT6U, r3
+	isync
+
+	/* IBAT 7 */
+	addis   r4, r0, CONFIG_SYS_IBAT7L@h
+	ori     r4, r4, CONFIG_SYS_IBAT7L@l
+	addis   r3, r0, CONFIG_SYS_IBAT7U@h
+	ori     r3, r3, CONFIG_SYS_IBAT7U@l
+	mtspr   IBAT7L, r4
+	mtspr   IBAT7U, r3
+	isync
+
+	/* DBAT 7 */
+	addis   r4, r0, CONFIG_SYS_DBAT7L@h
+	ori     r4, r4, CONFIG_SYS_DBAT7L@l
+	addis   r3, r0, CONFIG_SYS_DBAT7U@h
+	ori     r3, r3, CONFIG_SYS_DBAT7U@l
+	mtspr   DBAT7L, r4
+	mtspr   DBAT7U, r3
+	isync
+#endif
+
+	/* bats are done, now invalidate the TLBs */
+
+	addis	r3, 0, 0x0000
+	addis	r5, 0, 0x4    /* upper bound of 0x00040000 for 7400/750 */
+
+	isync
+
+tlblp:
+	tlbie	r3
+	sync
+	addi	r3, r3, 0x1000
+	cmp	0, 0, r3, r5
+	blt tlblp
+
+	blr
+
+	.globl enable_addr_trans
+enable_addr_trans:
+	/* enable address translation */
+	mfmsr	r5
+	ori	r5, r5, (MSR_IR | MSR_DR)
+	mtmsr	r5
+	isync
+	blr
+
+	.globl disable_addr_trans
+disable_addr_trans:
+	/* disable address translation */
+	mflr	r4
+	mfmsr	r3
+	andi.	r0, r3, (MSR_IR | MSR_DR)
+	beqlr
+	andc	r3, r3, r0
+	mtspr	SRR0, r4
+	mtspr	SRR1, r3
+	rfi
+
+/*
+ * This code finishes saving the registers to the exception frame
+ * and jumps to the appropriate handler for the exception.
+ * Register r21 is pointer into trap frame, r1 has new stack pointer.
+ */
+	.globl	transfer_to_handler
+transfer_to_handler:
+	stw	r22,_NIP(r21)
+	lis	r22,MSR_POW@h
+	andc	r23,r23,r22
+	stw	r23,_MSR(r21)
+	SAVE_GPR(7, r21)
+	SAVE_4GPRS(8, r21)
+	SAVE_8GPRS(12, r21)
+	SAVE_8GPRS(24, r21)
+	mflr	r23
+	andi.	r24,r23,0x3f00		/* get vector offset */
+	stw	r24,TRAP(r21)
+	li	r22,0
+	stw	r22,RESULT(r21)
+	mtspr	SPRG2,r22		/* r1 is now kernel sp */
+	lwz	r24,0(r23)		/* virtual address of handler */
+	lwz	r23,4(r23)		/* where to go when done */
+	mtspr	SRR0,r24
+	mtspr	SRR1,r20
+	mtlr	r23
+	SYNC
+	rfi				/* jump to handler, enable MMU */
+
+int_return:
+	mfmsr	r28		/* Disable interrupts */
+	li	r4,0
+	ori	r4,r4,MSR_EE
+	andc	r28,r28,r4
+	SYNC			/* Some chip revs need this... */
+	mtmsr	r28
+	SYNC
+	lwz	r2,_CTR(r1)
+	lwz	r0,_LINK(r1)
+	mtctr	r2
+	mtlr	r0
+	lwz	r2,_XER(r1)
+	lwz	r0,_CCR(r1)
+	mtspr	XER,r2
+	mtcrf	0xFF,r0
+	REST_10GPRS(3, r1)
+	REST_10GPRS(13, r1)
+	REST_8GPRS(23, r1)
+	REST_GPR(31, r1)
+	lwz	r2,_NIP(r1)	/* Restore environment */
+	lwz	r0,_MSR(r1)
+	mtspr	SRR0,r2
+	mtspr	SRR1,r0
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	SYNC
+	rfi
+
+	.globl	dc_read
+dc_read:
+	blr
+
+	.globl get_pvr
+get_pvr:
+	mfspr	r3, PVR
+	blr
+
+/*-----------------------------------------------------------------------*/
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r3 = dest
+ * r4 = src
+ * r5 = length in bytes
+ * r6 = cachelinesize
+ */
+	.globl	relocate_code
+relocate_code:
+	mr	r1,  r3		/* Set new stack pointer		*/
+	mr	r9,  r4		/* Save copy of Global Data pointer	*/
+	mr	r10, r5		/* Save copy of Destination Address	*/
+
+	GET_GOT
+	mr	r3,  r5				/* Destination Address	*/
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
+	lwz	r5, GOT(__init_end)
+	sub	r5, r5, r4
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
+
+	/*
+	 * Fix GOT pointer:
+	 *
+	 * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
+	 *
+	 * Offset:
+	 */
+	sub	r15, r10, r4
+
+	/* First our own GOT */
+	add	r12, r12, r15
+	/* then the one used by the C code */
+	add	r30, r30, r15
+
+	/*
+	 * Now relocate code
+	 */
+#ifdef CONFIG_ECC
+	bl	board_relocate_rom
+	sync
+	mr	r3, r10				/* Destination Address	*/
+	lis	r4, CONFIG_SYS_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4, r4, CONFIG_SYS_MONITOR_BASE@l
+	lwz	r5, GOT(__init_end)
+	sub	r5, r5, r4
+	li	r6, CONFIG_SYS_CACHELINE_SIZE		/* Cache Line Size	*/
+#else
+	cmplw	cr1,r3,r4
+	addi	r0,r5,3
+	srwi.	r0,r0,2
+	beq	cr1,4f		/* In place copy is not necessary	*/
+	beq	7f		/* Protect against 0 count		*/
+	mtctr	r0
+	bge	cr1,2f
+
+	la	r8,-4(r4)
+	la	r7,-4(r3)
+1:	lwzu	r0,4(r8)
+	stwu	r0,4(r7)
+	bdnz	1b
+	b	4f
+
+2:	slwi	r0,r0,2
+	add	r8,r4,r0
+	add	r7,r3,r0
+3:	lwzu	r0,-4(r8)
+	stwu	r0,-4(r7)
+	bdnz	3b
+#endif
+/*
+ * Now flush the cache: note that we must start from a cache aligned
+ * address. Otherwise we might miss one cache line.
+ */
+4:	cmpwi	r6,0
+	add	r5,r3,r5
+	beq	7f		/* Always flush prefetch queue in any case */
+	subi	r0,r6,1
+	andc	r3,r3,r0
+	mr	r4,r3
+5:	dcbst	0,r4
+	add	r4,r4,r6
+	cmplw	r4,r5
+	blt	5b
+	sync			/* Wait for all dcbst to complete on bus */
+	mr	r4,r3
+6:	icbi	0,r4
+	add	r4,r4,r6
+	cmplw	r4,r5
+	blt	6b
+7:	sync			/* Wait for all icbi to complete on bus	*/
+	isync
+
+/*
+ * We are done. Do not return, instead branch to second part of board
+ * initialization, now running from RAM.
+ */
+	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+	mtlr	r0
+	blr
+
+in_ram:
+#ifdef CONFIG_ECC
+	bl	board_init_ecc
+#endif
+	/*
+	 * Relocation Function, r12 point to got2+0x8000
+	 *
+	 * Adjust got2 pointers, no need to check for 0, this code
+	 * already puts a few entries in the table.
+	 */
+	li	r0,__got2_entries@sectoff@l
+	la	r3,GOT(_GOT2_TABLE_)
+	lwz	r11,GOT(_GOT2_TABLE_)
+	mtctr	r0
+	sub	r11,r3,r11
+	addi	r3,r3,-4
+1:	lwzu	r0,4(r3)
+	cmpwi	r0,0
+	beq-	2f
+	add	r0,r0,r11
+	stw	r0,0(r3)
+2:	bdnz	1b
+
+	/*
+	 * Now adjust the fixups and the pointers to the fixups
+	 * in case we need to move ourselves again.
+	 */
+	li	r0,__fixup_entries@sectoff@l
+	lwz	r3,GOT(_FIXUP_TABLE_)
+	cmpwi	r0,0
+	mtctr	r0
+	addi	r3,r3,-4
+	beq	4f
+3:	lwzu	r4,4(r3)
+	lwzux	r0,r4,r11
+	cmpwi	r0,0
+	add	r0,r0,r11
+	stw	r4,0(r3)
+	beq-	5f
+	stw	r0,0(r4)
+5:	bdnz	3b
+4:
+/* clear_bss: */
+	/*
+	 * Now clear BSS segment
+	 */
+	lwz	r3,GOT(__bss_start)
+	lwz	r4,GOT(__bss_end)
+
+	cmplw	0, r3, r4
+	beq	6f
+
+	li	r0, 0
+5:
+	stw	r0, 0(r3)
+	addi	r3, r3, 4
+	cmplw	0, r3, r4
+	bne	5b
+6:
+	mr	r3, r10		/* Destination Address		*/
+#if defined(CONFIG_DB64360)	|| \
+    defined(CONFIG_DB64460)     || \
+    defined(CONFIG_CPCI750)	|| \
+    defined(CONFIG_PPMC7XX)     || \
+    defined(CONFIG_P3Mx)
+	mr	r4, r9		/* Use RAM copy of the global data */
+#endif
+	bl	after_reloc
+
+	/* not reached - end relocate_code */
+/*-----------------------------------------------------------------------*/
+
+	/*
+	 * Copy exception vector code to low memory
+	 *
+	 * r3: dest_addr
+	 * r7: source address, r8: end address, r9: target address
+	 */
+	.globl	trap_init
+trap_init:
+	mflr	r4			/* save link register		*/
+	GET_GOT
+	lwz	r7, GOT(_start)
+	lwz	r8, GOT(_end_of_vectors)
+
+	li	r9, 0x100		/* reset vector always at 0x100 */
+
+	cmplw	0, r7, r8
+	bgelr				/* return if r7>=r8 - just in case */
+1:
+	lwz	r0, 0(r7)
+	stw	r0, 0(r9)
+	addi	r7, r7, 4
+	addi	r9, r9, 4
+	cmplw	0, r7, r8
+	bne	1b
+
+	/*
+	 * relocate `hdlr' and `int_return' entries
+	 */
+	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+	li	r8, Alignment - _start + EXC_OFF_SYS_RESET
+2:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	2b
+
+	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+	bl	trap_reloc
+
+	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+	li	r8, SystemCall - _start + EXC_OFF_SYS_RESET
+3:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	3b
+
+	li	r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
+	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+4:
+	bl	trap_reloc
+	addi	r7, r7, 0x100		/* next exception vector	*/
+	cmplw	0, r7, r8
+	blt	4b
+
+	/* enable execptions from RAM vectors */
+	mfmsr	r7
+	li	r8,MSR_IP
+	andc	r7,r7,r8
+	mtmsr	r7
+
+	mtlr	r4			/* restore link register	*/
+	blr
+
+#ifdef CONFIG_SYS_INIT_RAM_LOCK
+lock_ram_in_cache:
+	/* Allocate Initial RAM in data cache.
+	 */
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
+1:
+	dcbz	r0, r3
+	addi	r3, r3, 32
+	bdnz	1b
+
+	/* Lock the data cache */
+	mfspr	r0, HID0
+	ori	r0, r0, 0x1000
+	sync
+	mtspr	HID0, r0
+	sync
+	blr
+
+.globl unlock_ram_in_cache
+unlock_ram_in_cache:
+	/* invalidate the INIT_RAM section */
+	lis	r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
+	ori	r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
+	li	r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
+		     (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
+	mtctr	r4
+1:	icbi	r0, r3
+	addi	r3, r3, 32
+	bdnz	1b
+	sync			/* Wait for all icbi to complete on bus	*/
+	isync
+
+	/* Unlock the data cache and invalidate it */
+	mfspr   r0, HID0
+	li      r3,0x1000
+	andc    r0,r0,r3
+	li	r3,0x0400
+	or	r0,r0,r3
+	sync
+	mtspr   HID0, r0
+	sync
+	blr
+#endif
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/traps.c b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/traps.c
new file mode 100644
index 00000000..111c86cc
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/traps.c
@@ -0,0 +1,218 @@
+/*
+ * linux/arch/powerpc/kernel/traps.c
+ *
+ * Copyright (C) 1995-1996  Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modified by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * This file handles the architecture-dependent parts of hardware exceptions
+ */
+
+#include <common.h>
+#include <command.h>
+#include <kgdb.h>
+#include <asm/processor.h>
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+/* THIS NEEDS CHANGING to use the board info structure.
+*/
+#define END_OF_MEM	0x02000000
+
+/*
+ * Trap & Exception support
+ */
+
+static void print_backtrace(unsigned long *sp)
+{
+	int cnt = 0;
+	unsigned long i;
+
+	printf("Call backtrace: ");
+	while (sp) {
+		if ((uint)sp > END_OF_MEM)
+			break;
+
+		i = sp[1];
+		if (cnt++ % 7 == 0)
+			printf("\n");
+		printf("%08lX ", i);
+		if (cnt > 32) break;
+		sp = (unsigned long *)*sp;
+	}
+	printf("\n");
+}
+
+void show_regs(struct pt_regs *regs)
+{
+	int i;
+
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
+	       " %p TRAP: %04lx DAR: %08lX\n",
+	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
+	printf("MSR: %08lx EE: %01x PR: %01x FP:"
+	       " %01x ME: %01x IR/DR: %01x%01x\n",
+	       regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
+	       regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
+	       regs->msr&MSR_IR ? 1 : 0,
+	       regs->msr&MSR_DR ? 1 : 0);
+
+	printf("\n");
+	for (i = 0;  i < 32;  i++) {
+		if ((i % 8) == 0)
+		{
+			printf("GPR%02d: ", i);
+		}
+
+		printf("%08lX ", regs->gpr[i]);
+		if ((i % 8) == 7)
+		{
+			printf("\n");
+		}
+	}
+}
+
+
+static void _exception(int signr, struct pt_regs *regs)
+{
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
+}
+
+void MachineCheckException(struct pt_regs *regs)
+{
+	unsigned long fixup;
+
+	/* Probing PCI using config cycles cause this exception
+	 * when a device is not present.  Catch it and return to
+	 * the PCI exception handler.
+	 */
+	if ((fixup = search_exception_table(regs->nip)) != 0) {
+		regs->nip = fixup;
+		return;
+	}
+
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+
+	printf("Machine check in kernel mode.\n");
+	printf("Caused by (from msr): ");
+	printf("regs %p ",regs);
+	switch( regs->msr & 0x000F0000) {
+	case (0x80000000>>12):
+		printf("Machine check signal - probably due to mm fault\n"
+			"with mmu off\n");
+		break;
+	case (0x80000000>>13):
+		printf("Transfer error ack signal\n");
+		break;
+	case (0x80000000>>14):
+		printf("Data parity signal\n");
+		break;
+	case (0x80000000>>15):
+		printf("Address parity signal\n");
+		break;
+	default:
+		printf("Unknown values in msr\n");
+	}
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("machine check");
+}
+
+void AlignmentException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Alignment Exception");
+}
+
+void ProgramCheckException(struct pt_regs *regs)
+{
+	unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
+	int i, j;
+
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	show_regs(regs);
+
+	p = (unsigned char *) ((unsigned long)p & 0xFFFFFFE0);
+	p -= 32;
+	for (i = 0; i < 256; i+=16) {
+		printf("%08x: ", (unsigned int)p+i);
+		for (j = 0; j < 16; j++) {
+			printf("%02x ", p[i+j]);
+		}
+		printf("\n");
+	}
+
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Program Check Exception");
+}
+
+void SoftEmuException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Software Emulation Exception");
+}
+
+void UnknownException(struct pt_regs *regs)
+{
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	       regs->nip, regs->msr, regs->trap);
+	_exception(0, regs);
+}
+
+/* Probe an address by reading.  If not present, return -1, otherwise
+ * return 0.
+ */
+int addr_probe(uint *addr)
+{
+#if 0
+	int	retval;
+
+	__asm__ __volatile__(			\
+		"1:	lwz %0,0(%1)\n"		\
+		"	eieio\n"		\
+		"	li %0,0\n"		\
+		"2:\n"				\
+		".section .fixup,\"ax\"\n"	\
+		"3:	li %0,-1\n"		\
+		"	b 2b\n"			\
+		".section __ex_table,\"a\"\n"	\
+		"	.align 2\n"		\
+		"	.long 1b,3b\n"		\
+		".text"				\
+		: "=r" (retval) : "r"(addr));
+
+	return (retval);
+#endif
+	return 0;
+}
diff --git a/roms/u-boot/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/u-boot.lds
new file mode 100644
index 00000000..c0998490
--- /dev/null
+++ b/roms/u-boot/arch/powerpc/cpu/74xx_7xx/u-boot.lds
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2010 Wolfgang Denk <wd@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+OUTPUT_ARCH(powerpc)
+
+SECTIONS
+{
+  .text      :
+  {
+    arch/powerpc/cpu/74xx_7xx/start.o	(.text*)
+
+    *(.text*)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+  }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    _GOT2_TABLE_ = .;
+    KEEP(*(.got2))
+    KEEP(*(.got))
+    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
+    _FIXUP_TABLE_ = .;
+    KEEP(*(.fixup))
+  }
+  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data*)
+    *(.sdata*)
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	KEEP(*(SORT(.u_boot_list*)));
+  }
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.bss*)
+   *(.sbss*)
+   *(COMMON)
+   . = ALIGN(4);
+  }
+  __bss_end = . ;
+  PROVIDE (end = .);
+}